Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


International Harvester / Farmall H Parts

Category: Hydraulic System

[Categories]   [All H Parts]   [All Farmall Models]  


Farmall H Hydraulic Dipstick
Hydraulic Dipstick
- Mounts inside the hydraulic pump breather fill pipe, 11.80 inches long. For tractor models H, HV, M, MV, MD, MDV, Super H, Super HV, Super M, Super MV, Super MD, Super MDV, 140 Combine and 120 Windrower. All equipped with lift all countershaft driven hydraulic pump. (Item #: 126480, Ref: 15158EX) $30.50

Farmall H Hydraulic Pump
Hydraulic Pump
- Fits H (with F-300 front inner/outer timing cover), Super H, Super W4, 300, 350. 10 GPM @ 1600 RPM, 1200 PSI; dimensions: 3 7/8 inch flange to flange ** Mounting holes 2 5/8 inch center to center lower and 3 1/2 inch center to center upper holes. Replaces: 128191C91, 355515R92, 355515R95, 363779R91, 363779R92, 363779R94. (Item #: 102179, Ref: 128191C91) $966.00

Farmall H Hydraulic Pump Control Rod
Hydraulic Pump Control Rod
- Hydraulic Pump Control Rod is 38 inches long with a 3/8 inch diameter. It is used on the following tractors using belly mounted hydraulic pump: H, HV (Super H, Super HV both up to serial number 19233). This part replaces original part number 15091EX. (Item #: 179705, Ref: 15091EX) $44.80

Farmall H Hydraulic Pump Seal, O-Ring and Gasket Set
Hydraulic Pump Seal, O-Ring and Gasket Set
- Hydraulic Pump Seal, O-Ring and Gasket Set Fits: (I4, H, HV, O4, OS4, Super H, Super HV, Super W4, W4 all when converted Thompson live hydraulic pump), (300, 350 both when using Thompson live hydraulic pump; gas, LP or diesel), Fits pump #'s 363779R91, 363779R92, 363779R93, 363779R94, 366823R91, 366823R92, 366823R93 (the pump number is stamped into the aluminum upper pump housing). Contains 1 gasket 352439R1, 352439R2, 1 gasket 366783R1, 366783R2, 1 oil seal 356887R91, 124633R91, 2 oil seals 363781R91, 6 o-rings 355965R1, 511029, 1 o-ring 259246R1, 87016953, 2 o-rings 257611R1, 70925639, 2 back-up washers 369870R1, 1 5/8 inch - 18 NF jam nut 114498 and 86637932. Replaces: 363783R93, 363783R94 (Item #: 178899, Ref: 363783R93) $95.00

Farmall H Seal, Countershaft Driven Hydraulic Pump
Seal, Countershaft Driven Hydraulic Pump
- This Seal is used as a countershaft driven hydraulic pump seal or a hydro charge pump seal on Farmall / International: H, M, HV, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV, Hydro 86, Super MV, 544, 656, 666, 2544. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Item #: 128541, Ref: 70241779) $7.70



Farmall H Filter Element
Filter Element
- 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Farmall H Filter Element
Filter Element
- 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $11.20

Farmall H Hydraulic Hose Assembly-NPT, 12 inch
Hydraulic Hose Assembly-NPT, 12 inch
- Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Farmall H Hydraulic Hose Assembly-NPT, 180 inch
Hydraulic Hose Assembly-NPT, 180 inch
- Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Farmall H Hydraulic Hose Assembly-NPT, 24 inch
Hydraulic Hose Assembly-NPT, 24 inch
- Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $13.50

Farmall H Hydraulic Hose Assembly-NPT, 30 inch
Hydraulic Hose Assembly-NPT, 30 inch
- Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Farmall H Hydraulic Hose Assembly-NPT, 36 inch
Hydraulic Hose Assembly-NPT, 36 inch
- Universal. 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. (Item #: 118260, Ref: H42-2M-36) $15.20

Farmall H Hydraulic Hose Assembly-NPT, 48 inch
Hydraulic Hose Assembly-NPT, 48 inch
- Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Farmall H Hydraulic Pump Mounting Bracket
Hydraulic Pump Mounting Bracket
- This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8 inch diameter, 4-3/16 inch center to center. Also 2 foot mount holes 3/8 inch diameter, 5 inch center to center. Center pilot hole 3-1/4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Item #: 184547, Ref: 33020-1) $358.00

Farmall H Hydraulic Pump, Front Mounted
Hydraulic Pump, Front Mounted
- This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE A Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Item #: 182701, Ref: 40P018LAJSA) $696.00

Farmall H Moreflex Series 352 Coupler Drive Flange
Moreflex Series 352 Coupler Drive Flange
- Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Item #: 112243, Ref: L78-13) $20.98

Farmall H PTO Mounted Hydraulic Pump
PTO Mounted Hydraulic Pump
- For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommended hose sizes 1 1/4 inlet, 3/4 outlet. (Item #: 120040, Ref: HC-PTO-1A) $1307.44

Farmall H Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: 184977, Ref: GG300) $11.70

Farmall H Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1/4 inch NPT male brass fitting. (Item #: 178343, Ref: GG3000) $12.30

Farmall H Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $14.90

Farmall H Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172337, Ref: GG600) $14.30

Farmall H Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Item #: 178202, Ref: GG400) $8.98

Farmall H Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $14.90

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories]   [All H Parts]   [All Farmall Models]  







PayPal


Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2024 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy