Welcome! Please use the navigational links to explore our website.

Company Logo
Shopping Cart Icon

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats

• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

International Harvester / Farmall H Parts

Category: Cooling System

[Categories]   [All H Parts]   [All Farmall Models]  

Farmall H Fan
- This 6 blade fan measures 15 3/4 inch diameter, 1.437 inch pilot hole and mounting bolts circle is 2.625 inches. For tractor models H, HV. (Part No: A184904)

Farmall H Fan Belt
Fan Belt
- This Fan Belt measures 38 inches length and 0.700 inch width, fits engines: C152, C164, C169, C175. For tractor models H, 4, Super H, Super W4, 300, 350. Please verify measurements before ordering (Part No: 48032DA)

Farmall H Header, Water Cover
Header, Water Cover
- Water jacket cover for Models: 300, 350, H, Super H, Super HV. Order 45266DA Gasket separately. (Part No: 48461DA)

Farmall H Radiator
- For tractor models H and Super H, HV, Super HV, O4, OS4, W4, Super W4. Replaces OEM number 352628R92. (Part No: 352628R92)

Farmall H Radiator Cap With Lever
Radiator Cap With Lever
- Pressure cap with lever. For C, H, M, MD, O6, ODS6, Super C, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9, Super A, W4, W6, W9, WD9 (Part No: 67448DDWL)

Farmall H Radiator Pipe, Lower
Radiator Pipe, Lower
- Lower water pipe. For tractor models H, HV, I4, O4, OS4, Super H, Super W4, W4. Replaces 48828D, IHS684. (Part No: 353852R1)

Farmall H Radiator\Fuel Tank Hold Down Spring
Radiator/Fuel Tank Hold Down Spring
- This spring is used for the Radiator and for the Fuel Tank. Total 5 used per tractor, 2 for the radiator and 3 for the fuel tank. Spring measures 3/4 of an inch diameter and 1.15 inches long. For tractor models H, HV, O4, O6, SUPER H, ( As radiator hold down spring only - 2 used: SUPER M, SUPER MTA, W4, W6, WD6, 400, 424, 450, 2424. (Part No: 48826D)

Farmall H Thermostat
- This 160 degree Long Neck Thermostat. Fits the following tractor models: H, HV, M, MD, MDV, MTA, MV, O4, O6, Super H, Super HV, Super M, Super MD, Super W6, W4, W6, W9, 300, 350 Gas, 400, 450, 560 Diesel, 656 Diesel, 660 Diesel, and 706 Diesel. It does not come with a gasket. Replaces part numbers 313942R91, 313942R92, 315838R91, 317668R91, 37634DA, 261514R92. (Part No: R1852)

Farmall H Water Block Drain Plug, Winged
Water Block Drain Plug, Winged
- Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub LoBoy. (Part No: 45314DC)

Farmall H Water Pump
Water Pump
- For H, Super H. Water Pump. (Part No: 54148DA)

Farmall H Water Pump Pulley Flange
Water Pump Pulley Flange
- For model H. This flange measures 5 1/2 inches in diameter. This will NOT fit early tractors with a 5 inch outside diameter pulley part number 6598D. (Part No: 6598DX)

Farmall H Water Pump Seal
Water Pump Seal
- This new seal fits the Case-IH Tractor H, HV, 300 Farmall, and 350 Farmall. Replaces Part Number 473421. (Part No: 51492DA)

Farmall H Water Temp Gauge
Water Temp Gauge
- 19 Lead - with IHC Logo For H, M, W-4, W-6, W-9 R3695 (Part No: 63783D)

Farmall H Dipstick Heater
Dipstick Heater
- Keep your engine warm and ready to start in cold conditions with the engine dipstick heater. The element on the heater is 23 inches and flexible. It fits most dipstick holes that are 1/4 or larger. The end must be submerged at least 4 inches in oil. 120 volts, 90 watts. Not for use in openings that have plastic parts. (Part No: 5B201)

Farmall H Drain Tap (1\4 Inch X 18 NPT)
Drain Tap (1/4 Inch X 18 NPT)
- Fits many models. Please check dimensions before ordering. Fits many radiators and engine blocks.1KS517 (Part No: C9NN8115A)

Farmall H Magnetic Block Heater
Magnetic Block Heater
- Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Cooling System

[Categories]   [All H Parts]   [All Farmall Models]  


Order Toll Free
(800) 853-2651

Order online


YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2022 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy