FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 560 Parts

Category: Drive Train

[Categories] [All 560 Parts] [All Farmall Models]

Axle Seal, Rear - For 2-3/4 inch axles (inside diameter 2-3/4 inch, outside diameter 3-5/8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3/4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB (Item #: 172589, Ref: 377788R1) $17.00

Bull Pinion Shaft Bearing Retainer Oil Seal - This�bull pinion shaft bearing retainer oil seal has a 2.25 inch Inside Diameter, a 3.256 inch Outside Diameter and is .375 inch wide. There are two used per tractor. It Fits:�400, 450, 560, 660, MTA, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MVTA, Super W6, Super WD6, W400, W450, W6TA, M (SN: 294226 and up), MV (SN: 294226 and up), MD, MDV. Two needed per tractor. Replaces: 1699480C91, 200721H1, 3139744R1, 336626R91, 357037R91, 358896R91 (Item #: 163584, Ref: VT3755) $19.80

Gear Shift Boot - Some of the Farmall / International tractors were not factory equipped with a gear shift boot, and it was sold as an extra. This boot is used on models: H, M, 560, I4, I6, ID6, Super MVTA, 2606, HV, MD, T340, T5, MDV, MV, TD6, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MTA, Super MV, Super W4, Super W6, Super WD6, W4, W6, WD6, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 606, 660, B275, 354, 384. It measures 4-3/4 inches tall, 11/16 inch top hole inside diameter and 2-3/4 inches bottom hole. (Item #: 182890, Ref: 64603DA) $24.80

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.80

PTO Disc - For International / Farmall tractor models 330, 340, 460, 504, 560, 606, 660, 2504, 2606, Compatible with International Construction and industrial models 2504, Replaces International OEM number 376825R91, 374032R91, ID: 3-3/4" (95mm), OD: 6-7/16" (163mm), 12 Teeth, (Item #: 153769) $41.40

Ramp Assembly, Bearing Carrier and Overrunning Clutch - This Remanufactured Bearing Carrier and Overrun Ramp Assembly is for tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Additional $25 core charge will be added to your order. (Item #: 204412, Ref: 365402R11) $142.01

Reverse Idler Gear Bushing - This Bushing Measures 1.245 inches inside diameter, 1.375 inches outside diameter, 1.486 inches long. Sold individually. This bushing has a superior dimpled brass inner design to retain grease. No need for an external grease hole. Note: Must be honed or reamed to size when installed. Used on the following as a reverse idler gear bushing: 400, 450, 560, 660, B-450, BM, BMD, M, MD, MDV, MTA, MV, O6, ODS6, SBM, SBMD, Super M, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W6, Super WD6, W400, W450, W6, W6TA, WD6, WD6TA; Replaces: 48841D (Item #: 109669, Ref: 48841D) $13.70

Shift Lever Repair Pin Kit - For International / Farmall tractor models B250, B275, B276, B414, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, W4, W6, W400, W450, WD6, WD9, 300, 330, 340, 350, 354, 364, 384, 400, 424, 434, 444, 450, 460, 504, 560, 606, 660, 2300, Replaces International OEM number 256918R1, 172529, 256919R1, 259918R11, 310662R11, 310664R11, 34878D, 357003R1, 40465DA, 40466DA, 705650R1, (Item #: 167881) $25.00

Torque Ampilifer Carrier - For International / Farmall tractor models Super MTA (s/n 60001-later), 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, Includes pre-installed inner bearings, For a Remanufactured version of this sku use Item #: 204411, (Item #: 151955) $275.00

Torque Amplifier Clutch Carrier Nut - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359897, 35897N, (Item #: 111552) $41.00

Torque Amplifier Eliminator Assembly, Remanufactured - For International / Farmall tractor models Super MTA, 400, 450, 560, 660, Universal hydraulic oil (2.5 gallon) use Item #: 124173, $150.00 Core charge (Item #: 204456, Ref: 0.0) $526.00

Torque Amplifier Eliminator Kit, Remanufactured - For International / Farmall tractor models Super MTA, 400, 450, 560, 660, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 204450) $395.01

Torque Amplifier Gasket Kit - For International / Farmall tractor models Super MTA, 400, 450, 560, 660, Includes: Gaskets, IPTO seals and O-Ring, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 111245) $115.00

Torque Amplifier Gasket Set - For tractor models 400, 450, 560, Super MTA. (Item #: 172737, Ref: 373338R91) $47.60

Torque Amplifier Heavy, Remanufactured - For International / Farmall tractor models Super MTA, 400, 450, 560, 660, Iincludes: sprag kit, nut and belt pulley gear, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 204449) $1339.00

Torque Amplifier Primary Sun Gear without Bearing - 23 tooth. For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, (Super MTA serial number 60001 and up). (Item #: 113413, Ref: 361283R32) $188.00

Universal Parts and Accessories
Category: Drive Train

Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Item #: 108599, Ref: LU10088) $10.90

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Drive Train

[Categories] [All 560 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy