Welcome! Please use the navigational links to explore our website.

Company Logo
(800) 853-2651 View Cart

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books

• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

International Harvester / Farmall 460 Parts

Category: Gauges

[Categories]   [All 460 Parts]   [All Farmall Models]  

Farmall 460 Fuel Gauge
Fuel Gauge
- For tractor models 766, 966, 1066, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, Hydro 100.The 12 Volt Negative Ground fuel gauge is calibrated properly for 460, 560, and 660 with a Stewart Warner sending unit, but this fuel gauge has a different appearance. Gauge must be grounded to work properly. You will need to run an extra ground wire from the threaded clamp terminal to an existing bolt to attain a proper ground. 32-244 Ohm. Use with 378427R91 sending Unit. Replaces 533992R1 H142794. (Part No: 533992R1)

Farmall 460 Fuel Gauge
Fuel Gauge
- This aftermarket 12 volt negative ground fuel gauge replaces the factory Rochester gauge. It is calibrated for 0 - 70 OHMs. Used on; 340 Diesel with Factory Rochester gauge, (460, 560 Gas and Diesel with Factory Rochester gauge), 660 Gas and diesel with Factory Rochester gauge. Replaces: 369607R91 (Part No: 369607R91)

Farmall 460 Fuel Sending Unit
Fuel Sending Unit
- This sending unit is used on gas or diesel tractors: 2444, 444, 460, 560, 660. It is with Rochester Gauge and is calibrated for 0-70 ohms. Replaces: 1341373C1, 369608R91, 369608R92, 370376R92, 84203084, 84270826 (Part No: 369608R91)

Farmall 460 Oil Gauge
Oil Gauge
- 75 pound, IH logo in center. For tractor models 300, 350 Utility diesel, 400, 450 Farmall diesel, (460, 560, 660 with D236 engine). (Part No: 362177R94)

Farmall 460 Tachometer
- For tractor models: 460, 560, 660 Tachometer. Also replaces OEM 383092R91, 75679R91. (Part No: 383093R1)

Tachometer Cable
- 63 inches total length. For tractor models 1086, 1468, 1486, 330, 340, 3688, 460, 560, 660, (886 with D360 engine), 986. Replaces 371245R91, IHS248. (Part No: 401830R92)

Farmall 460 Ammeter Gauge
Ammeter Gauge
- 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)

Amp Gauge
- This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Part No: IHS1837)

Farmall 460 Hourmeter
- DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)

Farmall 460 Hourmeter, Analog
Hourmeter, Analog
- 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)

Farmall 460 Oil Gauge
Oil Gauge
- For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Part No: 41934DB)

Farmall 460 Oil Gauge Copper Line Kit
Oil Gauge Copper Line Kit
- Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch-24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)

Farmall 460 Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)

Farmall 460 Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Part No: IHS626)

Farmall 460 Oil Pressure Gauge
Oil Pressure Gauge
- Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)

Farmall 460 Temperature Gauge
Temperature Gauge
- Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Part No: 1042944)

Farmall 460 Temperature Gauge, Universal
Temperature Gauge, Universal
- For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Gauges

[Categories]   [All 460 Parts]   [All Farmall Models]  


Customer Service
Monday - Friday

Order online

Your Shopping
is Secure


YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2018 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy