Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


International Harvester / Farmall 450 Parts

Category: Gauges

[Categories]   [All 450 Parts]   [All Farmall Models]  


Farmall 450 Amp Gauge
Amp Gauge
- D-O-C Style - with IH Logo For Super A, Super C, H, Super H, M, Super M, Super MTA, Cub (From 1955), W4, W6, 200, 230, 240, 300, 350, 400, 450. Replaces 393334R91, 378424R91, 360053R92, IHS395. (Part No: 360053R91)
$9.42

Farmall 450 Fuel Gauge Cap
Fuel Gauge Cap
- This vented fuel cap has a built in gauge. Overall length is 17 1/4 inches. Uses gasket part number 23977DA - sold separately. For models 300, 350 row-crop and utility, 400 up to serial number 38332 with 18 gallon tank, 450 and W450 with 18 gallon tank. (Part No: 365495R91)
$129.03

No
Picture
Fuel Gauge Cap Gasket
- Gasket fits our Fuel Gauge Cap part numbers 365498R91, 365495R91 and 365499R91. (Part No: 43984D)
$2.33

Farmall 450 Oil Gauge
Oil Gauge
- 75 pound, IH logo in center. For tractor models 300, 350 Utility diesel, 400, 450 Farmall diesel, (460, 560, 660 with D236 engine). (Part No: 362177R94)
$13.88

Farmall 450 Oil Pressure Gauge
Oil Pressure Gauge
- 0-75 Style - with IH Logo with Studs For 300, 350, 400, 450 (Part No: 362036R91)
$14.16

Farmall 450 Tachometer
Tachometer
- his Tachometer fits Gas and LP Tractors: 400, 450 (Farmall Rowcrop: 300, 350 will work for GAS, LP and Diesel, but not exactly like the original. The RPM will read correctly, The PTO and ground speed is in a different location), Wheatland: 400 W400, 450, W450. NOTE; This is an aftermarket replacement gauge. The mounting studs on the back of this gauge are 2-5/8 inches center to center. It will not fit the 2-3/4 inch spacing of the original bracket without modifying the bracket. For a Tachometer that does not require this modification to your bracket, order 364393R91-OE (Part No: 364393R91)
$48.29

Farmall 450 Tachometer
Tachometer
- For tractor models: 400, 450, W400, W450 all with diesel engines. NOTE; This is an aftermarket replacement gauge. The mounting studs on the back of this gauge are 2-5/8 inches center to center. It will not fit the 2-3/4 inch spacing of the original bracket without modifying the bracket. For a Tachometer that does not require this modification to your bracket, order 364395R91-OE (Part No: 364395R91)
$46.78

No
Picture
Tachometer Cable
- 66 inches long. For tractor models 340, 400, 450. (Part No: 364396R91)
$41.40

Farmall 450 Tachometer Cable Connector
Tachometer Cable Connector
- This new tachometer cable connector housing retainer clip (Thrust Stop) is used to retain part numbers 369695R1 (Tachometer Drive Assembly) and 369692R1 (Tachometer Cable Connector) into part number 363749R91 Distributor Housing Drive. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces: 369693R1. (Part No: 369693R1)
$2.50

Farmall 450 Tachometer Cable Connector Housing
Tachometer Cable Connector Housing
- This New Tachometer Cable Connector Housing is used with 369695R1 Nylon gear with metal shaft. Will also need to order tach drive gear 369695R1 & 369693R1 clip for 300, 330, 350, 400, 450, 600, & 650 if replacing ALL NYLON gear/shaft drive. Fits Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces 369692R1 (Part No: 369692R1)
$43.96

Farmall 450 Tachometer Connection Housing Plate
Tachometer Connection Housing Plate
- Tachometer Connection Housing Plate with gasket. Used with part number 363749R91 distributor housing. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces: Plate: 363817R1, Gasket: 363814R1, 363814R2. (Part No: 363817R1)
$7.95

Farmall 450 Tachometer Drive Assembly
Tachometer Drive Assembly
- This new Tachometer Drive Assembly is used with part number 363763R11 cast distributor mounting housing with provision for drive. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. For IH distributor systems only. This part does not replace all nylon style gear/shaft number 363816R1 that was original on 300, 330, 350, 400, 450, 600, 650, unless the connector housing part number 369692R1 is ordered along with the 369693R1 clip. Replaces: 369695R1, 369695R91. (Part No: 369695R1)
$51.29

Farmall 450 Tachometer Mounting Bracket
Tachometer Mounting Bracket
- This new Tachometer Mounting Bracket fits; 300, 350, 400, 450 gas or diesel. Replaces: 364376R1 (Part No: 364376R1)
$39.50

Farmall 450 Tachometer, Diesel
Tachometer, Diesel
- For tractor models: 400, 450, W400, W450 all with diesel engines. This gauge is accurate of the original. Outside of the gauge is painted red. 2-3/4 inch stud spacing. Fits 364376R1 bracket, not included. Replaces 364395R91 (Part No: 364395R91-OE)
$163.53

Farmall 450 Tachometer, Gas and LP
Tachometer, Gas and LP
- This Tachometer fits Gas and LP Tractors: 400, 450 (Farmall Rowcrop: 300, 350 will work for GAS, LP and Diesel, but not exactly like the original. The RPM will read correctly, The PTO and ground speed is in a different location), Wheatland: 400 W400, 450, W450. Used with bracket 364376R1, not included. 2-3/4 inch stud spacing. Replaces: 364393R91 (Part No: 364393R91-OE)
$122.13

Farmall 450 Water Temperature Gauge
Water Temperature Gauge
- For tractor models: C, Super C, 200, 230, 300, 350, 400, 450, 460, 560, 660. Water Temperature Gauge with 72 inch Lead, "IH" Logo. Replaces 393481R91, 393476R91, 369849R91, 53690R2, IHS531. (Part No: 353868R91)
$29.73



Farmall 450 Ammeter Gauge
Ammeter Gauge
- 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$3.08

No
Picture
Amp Gauge
- This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Part No: IHS1837)
$29.95

Farmall 450 Hourmeter
Hourmeter
- DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

Farmall 450 Hourmeter, Analog
Hourmeter, Analog
- 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Farmall 450 Oil Gauge
Oil Gauge
- For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Part No: 41934DB)
$43.53

Farmall 450 Oil Gauge Copper Line Kit
Oil Gauge Copper Line Kit
- Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch-24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

Farmall 450 Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.95

Farmall 450 Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Part No: IHS626)
$12.95

Farmall 450 Oil Pressure Gauge
Oil Pressure Gauge
- Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.88

Farmall 450 Temperature Gauge
Temperature Gauge
- Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.03

Farmall 450 Temperature Gauge, Universal
Temperature Gauge, Universal
- For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.68

Farmall 450 Voltmeter, 12 Volt, Lighted Dial
Voltmeter, 12 Volt, Lighted Dial
- Voltmeter-Gauge has 8 volt to 16 volt range, lighted dial, fits 2 inch diameter hole. For tractors that use 12 volt electrical system. Chrome bezel with black background, white letters and white pointer. (Part No: VOLT12LT)
$10.74

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Gauges

[Categories]   [All 450 Parts]   [All Farmall Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2019 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy