Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


International Harvester / Farmall 240 Parts

Category: Cooling System

[Categories]   [All 240 Parts]   [All Farmall Models]  


Farmall 240 Fan Belt
Fan Belt
- This Fan Belt measures 41-7/8 inches length and 0.4 inch width. For 140, 200, 230, 240, 330, 340. Please verify measurements before ordering (Item #: 172941, Ref: 367697R1) $9.40

Farmall 240 Fan Pulley Assembly, Late
Fan Pulley Assembly, Late
- This pulley assembly fits Cub and Cub Lo-Boy C-60 engine serial number 165153 and up, Super A with C-113 engine serial number 317192 and up, Super AV and Super AV1 with C-123 engine, Super AV1 with C-113 engine serial number 317192 and up, Super C with C-123 engine, 100 and 130 with C-123 engine, (200, 230 and 240 with C-123 engine below serial number 65000). Fan mounting bolt thread is 12-24 UNC, 3.125 inch bolt pattern. Shaft is 5/8 inch -18 Thread. 4.379 inch outside diameter rear pulley. 4.062 inch outside diameter front pulley. VERIFY MEASUREMENTS. Will not fit 154, 184 or 185. (Item #: 126187, Ref: 131486C91) $144.00

Farmall 240 Fan, 4 Blade
Fan, 4 Blade
- 16.00 inch outside diameter, 1.250 inch pilot hole, 1.937 inch center to center on bolt holes. For tractor models 200, 230, 240, (2404 with C-135 engine), (2444 Lo-Boy with C-153 engine), (330, 340, 404 all with C-135 engine), (444 with C-153 engine). (Item #: 163811, Ref: A173710) $79.00

Farmall 240 Radiator Cap
Radiator Cap
- 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Item #: 112331, Ref: 180224M91) $6.81

Farmall 240 Radiator Cap
Radiator Cap
- 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. (** = FOR SHORT FILLER NECK). Fits **Super H, **Super M, MD, **Super W4, **Super W6 and WD6, **Super W9 and WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91. (Item #: 112331, Ref: 180224M91) $6.81

Farmall 240 Radiator Cap
Radiator Cap
- For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.70

Farmall 240 Radiator Cap Pressurized
Radiator Cap Pressurized
- For International / Farmall tractor models 100, 130, 140 (s/n 13967-earlier), 200, 230, 240, 330, 340, 460, 560, 600, 650, 660, Replaces International OEM number 393229R91, 362323R91, 370871R91, 2.050 radiator neck I.D.. Measure radiator neck before ordering, 7 PSI, (Item #: 112332) $11.00

Farmall 240 Radiator Hose - Bulk 3 x 1-3\8 inch
Radiator Hose - Bulk 3 x 1-3/8"
- For International / Farmall tractor models H, OS4, Super H, Super W4, W4, 140, 200, 240, 274 (Diesel), 300, 340, 350, 404, 424 (Gas), 444, 2404, 2424 (Gas), 2444, Replaces Case IH OEM number 369092R2, 407002R1, 387721R1, I.D. (A): 1-3/8" (1.375"), O.D.: 1-3/4" (1.750"), Length: 3', For Hose Clamp use Item #: 130453, (Item #: 114083) $20.20

Farmall 240 Radiator Hose - Bulk 3 x 2-3\8 inch
Radiator Hose - Bulk 3 x 2-3/8"
- For International / Farmall tractor models Super C, 100, 130, 200, 230, 240 Replaces International OEM number 355688R2, 407011R1, , Compatible with John Deere tractor models B (s/n B60000-later), BN (s/n B60000-later), BNH (s/n B60000-later), BO (Not Styled), BR (Not Styled), BW (s/n B60000-later), BWH (s/n B60000-later), R, Replaces John Deere OEM number B402R, R189R, B406R, R32654, I.D.: 2-3/8" (2.375"), O.D.: 2-3/4" (2.750"), Length: 3', For Hose Clamp use Item #: 111917, (Item #: 114082) $35.00

Farmall 240 Radiator Hose - Lower
Radiator Hose - Lower
- For International / Farmall tractor models A (s/n 355669-earlier), B, Super A, 140, 240, 404, 424 (gas), 444 (gas), Replaces International OEM number 20075DB, 2" ID, For Hose Clamp use Item #: 130455, (Item #: 112337) $4.20

Farmall 240 Radiator Hose, Upper
Radiator Hose, Upper
- Measures 2.00 inches inside diameter on one end and 2.625 inside diameter on the other, for gas engines. For tractor models 140, 240, 404, 424, 444. (Item #: 117695, Ref: 369397R1) $15.40

Farmall 240 Tower Hose Clamp - 25\32 inch to 1 inch
Tower Hose Clamp - 25/32" to 1"
- For International / Farmall tractor models 200, 230, 240, Replaces International OEM number 357870R91, .775" - 1.013" (19.68mm - 25.73mm), (Item #: 130436) $7.40

Farmall 240 Tower Hose Clamp 2.350 inch to 2.765 inch
Tower Hose Clamp 2.350" to 2.765"
- For International / Farmall tractor models 140, 240, 404, 424 (Gas), 444 (Gas) Replaces International OEM number 45813D, , Compatible with John Deere tractor models 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4020, 4025, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8020, 8430, 8630, (Item #: 130442) $9.30

Farmall 240 Tower Hose Clamp 2.685 inch to 2.995 inch
Tower Hose Clamp 2.685" to 2.995"
- For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, H, Super A, Super C, Super H, 100, 130, 140, 200, 230, 240, 300, 330, 350, 400, 450, 656, 706, 756, 806, 826, 856, 2706, 2756, 2806, 2826, 2856, Compatible with International Harvester (s) 55, 350, 550, 650, Replaces International OEM number 39205H, 706081R91, (Item #: 130443) $7.80

Farmall 240 Water Block Drain Plug, Winged
Water Block Drain Plug, Winged
- Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub Lo-Boy. (Item #: 178066, Ref: 45314DC) $13.00

No
Picture
Water Pump
- For International / Farmall tractor models 200 (Farmall, 1/54-12/56), 230 (Farmall, 1/56-12/58), 240 (Farmall, 1/58-12/61), 330 (1/57-12/58), 340 (Farmall, Gas, 1/58-12/63), 340 (Utility, Gas, 1/58-12/63), Compatible with International Engine (s) C135 (LP and Gas), Replaces International OEM number 367683, (Item #: 165903) $133.00

Farmall 240 Water Pump
Water Pump
- This water pump comes with hub and gasket for tractor models 140, (200, 230, IH 240 serial number 65001 and up with C123 engine), (330, 340, 404 with C135 engine), 2400, 2404, 2424, 2444, 4000, 444, all with C123 serial number 65001 and up, C135, C146 or 153 Gas engines. Replaces 367683R91, 375793R91, 367686R91, 367683R91. (Item #: 113376, Ref: 375793R92) $66.00

Farmall 240 Water Pump - New
Water Pump - New
- With pulley, fits A, B, C and models with C123 Gas Engine: 100, 130, 200 serial number <501-65000, 230 serial number <501-65000, Farmall 240 serial number <501-65000, Super A, Super C. Casting number 367683, 367684 or 372241. (Item #: 107899, Ref: 355760R93) $65.00

Farmall 240 Water Pump Gasket
Water Pump Gasket
- Used on 200, 230, 240, 2404 Indust/Const, 2424 Indust/Const, 2444 Indust/Const, 2504 Indust/Const, 330, 340, 404, 424, 444, 504. Replaces 367687R2 (Item #: 153405, Ref: 367687R2) $3.40

Farmall 240 Water Pump Gasket - Pump to Plate
Water Pump Gasket - Pump to Plate
- For International / Farmall tractor models 200, 230, 240, 504 (gas only), 2504, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models 500, 500C, 2500, 3514, Compatible with International Hay Cutting (s) 210, 225, 230, 275, 375, Replaces International OEM number 375743R2, (Item #: 162988) $3.30

Farmall 240 Water Pump Gasket Set
Water Pump Gasket Set
- This set is included with 355760R93 water pump. Set includes 68104C1 and 355769R1. (Item #: 183008, Ref: 68104C1) $11.90

Farmall 240 Water Pump Hub
Water Pump Hub
- Used with water pumps 601816C92, 375742R92, 375793R92. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 330, 340, 404, 460, 504, 560, 606, 660, 706, 806. (Item #: 121936, Ref: 368501R2) $33.90

No
Picture
Water Pump Pulley, Used
- For International tractor models 200 (s/n 65001-later), 230 (s/n 65001-later), 240 (s/n 65001-later), 330, 340, 404, 444, 504, Compatible with International Construction and industrial models 2404, 2444 (Lo-Boy), 2504, Replaces International OEM number 367688R1, Single Groove Pulley, For a new version of this item use Item #: 108755, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435414) $62.01

Farmall 240 Water Pump, Remanufactured, 123868
Water Pump, Remanufactured, 123868
- For International / Farmall tractor models A, B, C, Super A, Super C, 100, 130, 200, 230, 240, Replaces Casting number 123868, Includes Mounting Gasket, With Pulley, (Item #: 206125) $112.01



Farmall 240 Bar's Leaks - Radiator Stop Leak 11oz
Bar's Leaks - Radiator Stop Leak 11oz
- Heavy Duty Stop Leak is versatile, working safely and effectively on plastic, aluminum and metal radiators, heater cores, gaskets and freeze plugs. (Item #: 159209, Ref: Z14012) $6.10

Farmall 240 Dipstick Heater
Dipstick Heater
- Keep your engine warm and ready to start in cold conditions with the engine dipstick heater. The element on the heater is 23 inches and flexible. It fits most dipstick holes that are 1/4 or larger. The end must be submerged at least 4 inches in oil. 120 volts, 90 watts. Not for use in openings that have plastic parts. (Item #: 158652, Ref: 5B201) $35.00

Farmall 240 Drain Tap (1\4 Inch X 18 NPT)
Drain Tap (1/4 Inch X 18 NPT)
- Fits many models. Please check dimensions before ordering. Fits many radiators and engine blocks.1KS517 (Item #: 110749, Ref: C9NN8115A) $3.20

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Cooling System

[Categories]   [All 240 Parts]   [All Farmall Models]  







PayPal


Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2024 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy