Welcome! Please use the navigational links to explore our website.
Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


International Harvester / Farmall Super C Parts

Category: Hitch / Drawbar

[Categories]   [All Super C Parts]   [All Farmall Models]  


Farmall Super C 3-Point Hitch Kit
3-Point Hitch Kit
- For 200, 230, C, Super C. Three Point Hitch. Cat. I. Uses existing hydraulic lift. This 3-point hitch kit is a Cat # 1. Includes brackets to clamp to the axle housing and Cat #1 top link, Also includes rods and chains for cultivator lift. Will work with 9N5182A drawbar, not included. Additional $120.00 shipping due to weight. (Item #: 178617, Ref: 49A307) $1162.74

No
Picture
Fasthitch to 3-Point Quick-Attach Assembly
- For International / Farmall tractor models C, Super C, 200, 230, 544, 606, 656, 706, 756, 806, 826, 856, Category 2 Straight arm style, This is a one piece assembly with a U style toplink bracket attached to the arms, Top link not included, For Toplink use Item #: 103163, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 111431) $314.30

No
Picture
Fasthitch to 3-point Prongs with Balls
- For International / Farmall tractor models C, Super C, 200, 240, Category 1 Balls, Additional Handling and Oversize Fees Apply To This Item, (Item #: 109590) $146.68

No
Picture
Fasthitch to 3-point Prongs with Cat 2 Balls
- For International / Farmall tractor models C, Super C, 200, 230, 544, 606, 656, 706, 756, 806, 826, 856, Set of 2, Category 2 (straight style arm with balls), Additional Handling and Oversize Fees Apply To This Item, (Item #: 114596) $146.68



Farmall Super C Center Link Pin
Center Link Pin
- For tractors using a Category 1 3 point hitch. Pin diameter of 3/4 of an inch. Usable length of 3 inches. Overall length of 4 15/32. Head diameter of 7/8 of an inch, with a 1/2 inch hole. Fits many models. Verify dimensions for your specific application. Can be used with DKP14 linch pin. (Item #: 108702, Ref: 957E560) $1.80

Farmall Super C Check Chain and Pin Kit
Check Chain and Pin Kit
- Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Item #: 111334, Ref: CBPN598A) $8.06

Farmall Super C Conversion Tong
Conversion Tong
- Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. Add $5.00 additional shipping due to weight. (Item #: 184153, Ref: FH1447) $337.61

Farmall Super C Conversion Tong
Conversion Tong
- Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. Add $5.00 additional shipping due to weight. (Item #: 184167, Ref: FH1448) $361.72

Farmall Super C Conversion Tong
Conversion Tong
- Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. Add $5.00 additional shipping due to weight. (Item #: 179611, Ref: FH14416) $382.11

Farmall Super C Conversion Tong
Conversion Tong
- Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. Add $5.00 additional shipping due to weight. (Item #: 179008, Ref: FH14417) $382.11

Farmall Super C Drawbar, Universal Cat I, 20-1\2 Inch
Drawbar, Universal Cat I, 20-1/2 Inch
- Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Item #: 179615, Ref: S.49123) $52.51

Farmall Super C Drawbar, Universal Cat I, 25-1\2 Inch
Drawbar, Universal Cat I, 25-1/2 Inch
- Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Item #: 178799, Ref: S5009) $38.26

Farmall Super C Drawbar, Universal Cat I, 29-3\4 Inch
Drawbar, Universal Cat I, 29-3/4 Inch
- Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Item #: 178800, Ref: S128196) $45.17

Farmall Super C Drawbar, Universal Cat I, 30-1\8 Inch
Drawbar, Universal Cat I, 30-1/8 Inch
- Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-1/8 inches center to center on lower link pins, (D) 2-1/16 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Eleven 25/32 inch holes. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Item #: 103174, Ref: S125) $40.75

Farmall Super C Drawbar, Universal Cat II, 30-3\4 Inch
Drawbar, Universal Cat II, 30-3/4 Inch
- Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. $12 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Item #: 103176, Ref: S126) $56.30

Farmall Super C Drawbar, Universal Cat II, 30-3\4 Inch
Drawbar, Universal Cat II, 30-3/4 Inch
- Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. There is an additional shipping cost for this product of $15.00 (Item #: 103176, Ref: S60155) $56.30

Farmall Super C Drawbar, Universal Cat II, 36-1\4 Inch
Drawbar, Universal Cat II, 36-1/4 Inch
- Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Item #: 179623, Ref: S15134) $121.51

Farmall Super C Drawbar, Universal Cat II, 36-29\32 Inch
Drawbar, Universal Cat II, 36-29/32 Inch
- Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Item #: 179670, Ref: S3394) $88.20

Farmall Super C Drawbar, Universal Cat II, 36-3\4 Inch
Drawbar, Universal Cat II, 36-3/4 Inch
- Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. $10 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Item #: 103177, Ref: S60156) $80.00

Farmall Super C Drawbar, Universal Cat II, 39-3\8 Inch
Drawbar, Universal Cat II, 39-3/8 Inch
- Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Item #: 179583, Ref: S15081) $91.51

Farmall Super C Drawbar, Universal Cat III, 42-3\4 Inch
Drawbar, Universal Cat III, 42-3/4 Inch
- Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Item #: 180531, Ref: S29139) $262.51

Farmall Super C Hair Pin Assortment
Hair Pin Assortment
- 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $10.90

Farmall Super C LINCH PIN, Pack of 2
LINCH PIN, Pack of 2
- Package of 2 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. (Item #: 153791, Ref: DKP516) $2.30

Farmall Super C Leveling Assembly
Leveling Assembly
- Universal Economy Leveling Assembly. 1-5/16" body of high strength tubing, thread size, 7/8" fine thread-study clevis at each end with 5/8" pin holes. May be used right or left. Can Replace NCA577A and Fork. 18 inches closed, 28 inches open. (Item #: 154104, Ref: LB152) $27.00

Farmall Super C Lift Arm Bushing
Lift Arm Bushing
- This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref: BUSH04) $2.74

Farmall Super C Linch Pins, Pack of 2
Linch Pins, Pack of 2
- Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Item #: 153789, Ref: DKP14) $2.30

Farmall Super C Linch Pins, Pack of 2
Linch Pins, Pack of 2
- Package of 2 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 2. (Item #: 153792, Ref: DKLP91) $1.26

Farmall Super C Linch Pins, Pack of 2
Linch Pins, Pack of 2
- Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. (Item #: 153788, Ref: DKP316) $2.30

Farmall Super C Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref: 159332) $41.87

Farmall Super C Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. $7 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Item #: 103203, Ref: 159324) $51.42

Farmall Super C Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref: 159326) $56.51

Farmall Super C Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref: 159328) $50.81

Farmall Super C Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. $6 additional shipping is required for this part due to the size. This will be added to the shipping total of the order. (Item #: 103206, Ref: 159330) $57.71

Farmall Super C Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref: 159322) $52.00

Farmall Super C Mower Deck Height Stabilizer Kit
Mower Deck Height Stabilizer Kit
- Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets and two lower brackets with chain. (Item #: 103201, Ref: MHSK1) $37.00

Farmall Super C Quick Hitch A-Frame Design
Quick Hitch A-Frame Design
- Makes for easier implement attachment, by use of self-aligning steel roller. System self-aligns as tractor’s 3-point hitch is raised. This is a CE Approved, Cat I. 2645 pound capacity. For implement side adapter, see part number S23465. Additional $200.00 shipping due to weight. (Item #: 179003, Ref: S110168) $335.41

Farmall Super C Quick Hitch A-Frame Implement Adapter
Quick Hitch A-Frame Implement Adapter
- Used with S110168 quick hitch, this is a weld on bracket. The load capacity is3306 pounds. (Item #: 179380, Ref: S23465) $98.30

Farmall Super C Quick Hitch, Category I
Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. Additional $60 shipping due to the weight. (Item #: 180731, Ref: HF141101) $328.58

Farmall Super C Stabilizer Assembly
Stabilizer Assembly
- This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Item #: 179605, Ref: 343437X1) $20.76

Farmall Super C Stabilizer Chain
Stabilizer Chain
- This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Item #: 173628, Ref: 159350) $24.26

Farmall Super C Stabilizer Chains, Set
Stabilizer Chains, Set
- 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. (Item #: 174066, Ref: SK102CH) $54.45

Farmall Super C Stabilizer Link
Stabilizer Link
- This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Item #: 179606, Ref: VPL3232) $28.05

Farmall Super C Top Link
Top Link
- Economy Top Link, 16 inch body. Category 1, 3/4 inch balls. Adjusts 20.5 to 29 inches overall. Dichromate plated center body. OEM JSA5050 (Item #: 30533E91) $26.56

Farmall Super C Universal Drawbar Lock
Universal Drawbar Lock
- For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref: 49A29) $22.76

Farmall Super C Universal Drawbar Lock
Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $31.13

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hitch / Drawbar

[Categories]   [All Super C Parts]   [All Farmall Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2022 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy