FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall Cub Parts

Category: Hydraulic System

[Categories] [All Cub Parts] [All Farmall Models]

Hydraulic Pump - For International / Farmall tractor models Cub, Cub Lo-Boy, Replaces International OEM number 352035R94, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, Universal hydraulic oil (2.5 gallon) use Item #: 124173, (Item #: 104247) $404.00

Hydraulic Pump Gasket, O-Ring and Seal Kit - This Hydraulic Pump Gasket, O-Ring and Seal Kit services pump numbers 352035R92, 352035R93, 352035R94, 352035R95, 355006R93, 05 1004 040-02, 05 1004 040-03, 05 1004 040-04, 05 1004 040-05, 05 1004 040-06. If you have pump number 352035R91 (Pesco 05 1004 040-01) you must also purchase a front seal number 355742R91. This 18-piece kit includes instructions. Includes jam nut and drive key that most kits do not include. Replaces 351677R1, 352034R2, 510185, 353828R1, 86977728, 252707R1, 72585739, 350667R1, 355047R1, 353827R1, 124925, 114494, 124543, 106749, 355882R1, 86637641, 252739R1, 14457080, 355199R1 (Item #: 182523, Ref: 352035R94KIT) $36.20

Hydraulic Touch Control Block Gasket and O-Ring Kit - Fits tractor models Cub, Cub Lo-Boy; Replaces: 352024R1, 350667R1, 350684R1, 253070R1, 351989R7, 352221R1, 350658R1, 75285739, 9706714, 843092, 411205R1, 354008R93, 354008R94, 354008R95, 360713R92, 360713R91, 411205R2, 238-5324, A175513, 351989R6, 238-6326, 355966R1, 350672R1, 352034R1, 49861, 355967R1, 86505727, 461173R1, 352004R1, 13727D, 254691R1, 238-5113, 351989R4, 355967R1, 253070R1, 9672467, 86553262, 351983R1, 352034R2, 252738R1, 128999. Fits both early and late touch control blocks. Some applications may have extra O-rings and/or washers. There are 24 pieces in this gasket and O-ring kit. (Item #: 178598, Ref: IHS3027) $57.00

Touch Control Piston Sleeve Boot - This touch control piston sleeve boot fits the following tractor models: C, Cub, Cub Lo-Boy, Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 140, and 200. It has an overall length of 2.425 inches, an overall outside diameter of 1.235 inches, a top hole diameter of 0.530 inches, and a bottom hole diameter of 0.875 inches. Replaces 351754R3, 364833R2. (Item #: 182534, Ref: 351754R3) $10.30

Touch Control Stop - Fits C, Cub, Super A, Super C, 100, 130, 140, 200. Cub uses 2 per tractor, other models use 4 per tractor. Sold individually. Will Not Fit 154, 184, 185 Replaces: 350717R91 (Item #: 161080, Ref: 350717R91) $13.90

Touch Control Valve Boot - This touch control valve boot fits the following tractor models: Cub, Cub Lo-Boy, Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 140, and 200. It has an overall length of 2.450 inches, an overall outside diameter of 1.500 inches, a top hole diameter of 1.755 inches, and a bottom hole diameter of 0.725 inches. Replaces Leather Boot: 351753R3, 364832R1, 364832R2. (Item #: 178168, Ref: 351753R3) $11.30

Universal Parts and Accessories
Category: Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. (Item #: 118260, Ref: H42-2M-36) $15.20

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Mounting Bracket - This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8 inch diameter, 4-3/16 inch center to center. Also 2 foot mount holes 3/8 inch diameter, 5 inch center to center. Center pilot hole 3-1/4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Item #: 184547, Ref: 33020-1) $377.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE A Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Item #: 182701, Ref: 40P018LAJSA) $720.00

Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Item #: 112243, Ref: L78-13) $28.00

PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommended hose sizes 1 1/4 inlet, 3/4 outlet. (Item #: 120040, Ref: HC-PTO-1A) $1307.44

Universal Pressure Gauge, Hydraulic - 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: 184977, Ref: GG300) $11.37

Universal Pressure Gauge, Hydraulic - 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1/4 inch NPT male brass fitting. (Item #: 178343, Ref: GG3000) $14.60

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172337, Ref: GG600) $13.91

Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Item #: 178202, Ref: GG400) $10.70

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories] [All Cub Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy