Welcome! Please use the navigational links to explore our website.

Company Logo
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


International Harvester / Farmall 856 Parts

Category: Clutch

[Categories]   [All 856 Parts]   [All Farmall Models]  


Farmall 856 Bearing
Bearing
- Clutch pilot bearing, 2.0472 inch outside diameter, .787 inch inside diameter, .5906 inch wide bore, 2 seals. Tractors: 544, 606, 656, 664, 666, 686 706, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1245, 1456D, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456D, 2544, For 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2544, 2566, 2606, 2706, 2756, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 5186, 544, 606, 6388, 656, 6588, 664, 666, 6788, 686, 706, 756, 766, 786, 826, 856, 886, 966, 986. (Part No: 524598R91)
$5.46

Farmall 856 Clutch \ Brake Return Spring
Clutch / Brake Return Spring
- This spring has an overall length of 4.463 inch, with a wire diameter of 0.083 inch and an outside spring diameter of 0.744 inch. Fits: [1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 706, 756, 766, 806, 826, 856, 966 (use on the following gear drive tractor when used as a clutch pedal return spring)], [4100, 4156, 4166 (use on the following model when used as a clutch pedal and brake pedal return spring)]. Replaces: 626206R1. (Part No: 626206R1)
$16.50

Farmall 856 Clutch Alignment Tool
Clutch Alignment Tool
- 1-13/16 inch, 11 spline, 1-3/4 inch, 17 spline, .787 inch pilot. For tractor models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1466, 1468, 3088, 3288, 3688, 2706, 2756, 2806, 2856. (Part No: S.70928)
$32.50

Farmall 856 Clutch Bearing & Seal Kit
Clutch Bearing & Seal Kit
- Kit includes sealed release bearing, pilot bearing, inner and outer PTO seals and o-ring. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986. (Part No: N158563)
$44.70

Farmall 856 Clutch Bearing Carrier
Clutch Bearing Carrier
- Replaces 380109. For tractor models Hydro 100, 1026, 1066, 1086, 1206, 1256, 1456, 466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986 (Part No: 380109R1)
$72.10

Farmall 856 Clutch Bearing and IPTO Seal Kit
Clutch Bearing and IPTO Seal Kit
- For tractor models 706, 756, 766, 786, 806, 826, 856. Includes: clutch release bearing, pilot bearing, inner and outer IPTO seals, o-ring (Part No: R2991)
$60.00

Farmall 856 Clutch Disc, New
Clutch Disc, New
- 12 inch, 4 button, spring loaded, 1.1875 inch spline diameter, 11 spline. For tractor models 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 400, 450, 500, 560, 600, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Super MTA. (Part No: 384395R94)
$179.00

Farmall 856 Clutch Kit
Clutch Kit
- This new dual 12 inch clutch kit contains: 12 inch, 17 spline, 1.75 inch hub pressure plate assembly (405300R92); 12 inch, 11 spline, 1 3/16 inch hub, cerametallic clutch disc (384395R94); pilot (524598R91) and release (365867R91) bearings, and clutch alignment tool. For tractor models: 2706, 2756, 2806, 2826, 2856, 3088, 3288, 660, 706, 756, 766, 786, 806, 826, 856, 886, 966. (Part No: 384395R94-KIT)
$405.00

No
Picture
Clutch Pressure Plate Assembly
- Pressure plate assembly, 12 inch, 17 spline plate, 1-3/4 inch hub. For tractor models 766 diesel, 786, 826, 856, 886, 966, 2826, 2856, 3088, 3288. Not for over-center clutch. (Part No: 405300R92R)
$237.78

Farmall 856 Clutch Release Bearing Return Kit
Clutch Release Bearing Return Kit
- Kit includes, 1 bracket, 1 return spring, 1 bolt and pin 1/4 inch, 1 washer, 1 cotter key. For tractor models 1066, 1206, 1256, 1456, 1466, 1566, 2706, 2756, 2826, 2856, 706, 756, 766, 806, 826, 856, 966. (Part No: 50191001)
$25.50

Farmall 856 Clutch Release Fork
Clutch Release Fork
- For tractor models 100, 1026, 1066, 1086, 1206, 1256, 1456, 466, 1468, 1486, 1566, 1568, 1586, 21026, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788, 706, 756, 766, 786, 806, 826, 856, 966, 986. (Part No: 380110R1)
$52.60

Farmall 856 Clutch Release Shaft
Clutch Release Shaft
- For tractor models 100, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 706, 756, 766, 806, 826, 856, 966. (Part No: 380180R12)
$155.00

Farmall 856 PTO Clutch Disc
PTO Clutch Disc
- Clutch disc kit, for independent PTO using 12 discs 381489R3 and 5 plates 381490R1. For single and dual speed tractors. For 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, 3388, 4100, 4156, 4166, 4186, 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Part No: 68802C91)
$67.90

Farmall 856 PTO Clutch Kit
PTO Clutch Kit
- 5 fiber discs and 12 steel plates. For 706 thru 1086 (from 1962) with single speed PTO, 56, 66, 86. (Part No: R2973)
$67.90

Farmall 856 PTO Gasket and Clutch Disc Kit
PTO Gasket and Clutch Disc Kit
- Same kit as 77721, PTO Gasket and Clutch Disc Kit but also includes discs. For tractor models 100, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 21026, 21256, 21456, 2706, 2756, 2806, 2856, 3388, 3788, 706, 756, 766, 806, 826, 856, 886, 966, 986, all with independent PTO. Contains 9 plates (381489R3), 7 discs (381490R1), gaskets, o-rings (about 50 pieces). (Part No: PCK721)
$162.00

Farmall 856 Release Bearing
Release Bearing
- Clutch Release Bearing, inside diameter 2.49 inches, outside diameter 4.06 inches, width .820 inches, sealed roller. For mechanical release systems. For tractors: 400, W400, 450, W450, 560, 660, 756 766, 786, 886, 966, 986, 1066, 1086, 1206, 1256, 1456D, 1466, 1468, 1486, 1566, 1586, 21206, 21256, 21456, 2756, 3288, 3388, 3588, 3688, 3788 For 1026, 1066, 1086, 1206, 1256, 1456, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 21026, 21206, 21256, 21456, 2806, 2856, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, 806, 815, 856, 915, 966. Replaces original part numbers 361407R91, 362026R91, 362027R91, 365867R91, 365868R91, 367153R91, 58612D, 69789C1 and 69789C91. (Part No: N1585)
$16.20

Farmall 856 Release Bearing
Release Bearing
- Greasable. For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3388, 3588, 3688, 3788, 400, 4100, 4156, 4166, 4186, 4366, 4386, 450, 4568, 560, 6388, 6588, 660, 6788, 706, 756, 786, 806, 826, 856, 886, 966, 986, Hydro 100, W400, W450. It has an inside diameter of 2.50 inches, an outside diameter of 4.125 inches, and is .83 inches wide. Please verify measurements before ordering. (Part No: 365867R91)
$24.76

Farmall 856 Remanufactured Clutch Kit
Remanufactured Clutch Kit
- Our new clutch kit contains: a 12 inch heavy duty, 17 spline 1 3/4 inch hub, 12 spring re-manufactured pressure plate assembly; a 12 inch 11 spline, 1 3/16 inch hub, 6 pad re-manufactured clutch disc; new release and pilot bearings. For tractors: 706, 756, 766, 786, 806, 826, 856, 986. Replaces YTO 104496K, 384395R94, 405300R92 (Part No: 140640)
$405.00



Farmall 856 Tractor Splitting Stand Kit with Rails
Tractor Splitting Stand Kit with Rails
- This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). Additional $40.00 shipping due to weight. This additional charge will be added to your order. (Part No: 119888)
$890.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories]   [All 856 Parts]   [All Farmall Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2022 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy