FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 384 Parts

Category: Steering

[Categories] [All 384 Parts] [All Farmall Models]

Drag Link End - A= 3.060 inch, B= .625 inch, 19 right hand thread. For tractor models 238, 275, 276, 354, 374, 384, 414, 434, 444, B250, B275, B414, 2300A. Replaces 3045309R91, 3040922R92 (Item #: 128358, Ref: 3040922R92) $29.80

Drag Link End - A= 3.060 inch, B= .625 inch, 19 left hand thread. For tractor models 275, 276, 354, 374, 384, 414, 434, 444, B250, B275, B414. Replaces 3040921R11, 3071055R91. (Item #: 104376, Ref: 3045309R91) $34.10

No
Picture
Front Axle Pivot Pin - For International / Farmall tractor models B414, 276, 354, 364, 384, 434, 444, 2300, 2350, Replaces International OEM number 3043857R1, (Item #: 163569) $28.80

Spindle, LH - This spindle measures A= 11.70 inch, B= 1.609 inch, C= 1.375 inch, D= 1.125 inch. For tractor models 2300, 2350A, 354, 364, 384, 434, 444, B414. The wheel bearing kit used for this spindle is part number WBKIH5. (Item #: 104322, Ref: 3043927R1) $376.00

Spindle, RH - This spindle measures A= 11.70 inch, B= 1.609 inch, C= 1.375 inch, D= 1.125 inch. For tractor models 2300, 2350A, 354, 364, 384, 434, 444, B414. The wheel bearing kit used for this spindle is part number WBKIH5. (Item #: 104323, Ref: 3043928R1) $351.00

Stay Rod Cap - For tractor models 2424, 2444, 384, 424, 444, B414. Replaces 842388R1. (Item #: 179053, Ref: 3109613R1) $15.10

Stay Rod Socket - For tractor models 2424, 2444, 384, 424, 444, B414. (Item #: 179669, Ref: 3043920R1) $12.80

Steering Bearing - For International / Farmall tractor models 384, 444, Replaces Case OEM number 3112672R91, I.D.: 2.13", O.D.: 2.19", (Item #: 166343) $28.70

Steering Wheel - For International / Farmall tractor models 354, 364, 384, 444, 2300A, 2400A, Replaces International OEM number 3112601R1, 3125554R91, 3125555R1, 3125556R1, 3 Plastic Spokes, Splined Center, (Item #: 153571) $45.90

Tie Rod End - This Tie Rod End is 3.125 inches from center of ball joint to end of shaft, has a 0.750 inch - 16 right hand thread shaft. Replaces 3040920R92, 3071097R91. (Item #: 104384, Ref: 3040920R92) $19.90

Tie Rod, Left Hand - This Tie Rod is 32.000 inches long and 0.750 inches in diameter. It is used on the following International Tractors: 2300, B275, B414 (Manual and Power Steering), 2350A, 276. Case-IH TRACTOR: 354, 364, 384, 434, 444. It replaces original part numbers 3071096R91, 3040919R91 (Item #: 104371, Ref: 3040919R92) $76.00

Tie Rod, Short - A= 3.125 inch, B= .750 inch, 16 right hand thread. For tractor models B414, 354, 364, 384. (Item #: 104384, Ref: 3040920R91) $19.90

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 384 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy