Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


International Harvester / Farmall 350 Parts

Category: Electrical System

[Categories]   [All 350 Parts]   [All Farmall Models]  



NOTE
Alternator
- Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651.
NOTE

Farmall 350 Coil, Original, 12 Volt
Coil, Original, 12 Volt
- OEM style coil. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. This is an International Harvester OEM style 12 volt distributor coil. This distributor coil has a 2.8 ohm rating between the two primary winding terminals. Requires an external resistor. (Part No: 353875R91)
$70.00

Farmall 350 Coil, Original, 6 Volt
Coil, Original, 6 Volt
- OEM style coil. Measures overall length of 5 3/8 inches, Diameter at widest point of center ridge is 2 1/4 inches. This distributor coil has a 1.4 ohm rating between the two primary winding terminals. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353874R91)
$69.00

Farmall 350 Distributor Breaker Plate
Distributor Breaker Plate
- Used on International Distributors, this plate is where points are secured. Points not included. Four Cylinder Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Replaces 352277R11 (Part No: 352277R11)
$22.50

Farmall 350 Distributor Cap
Distributor Cap
- 2-3/16 inches high, fits 4 cylinder. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Part No: 351693R92)
$6.70

Farmall 350 Distributor Cap Spring Clip
Distributor Cap Spring Clip
- Fits listed IH models when equipped with IH brand distributor 353898R11. Replaces: 107384C1, 353894R1 (Part No: 353894R1)
$14.10

Farmall 350 Distributor Condenser
Distributor Condenser
- Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Part No: 353903R1)
$6.76

Farmall 350 Distributor Drive Housing
Distributor Drive Housing
- This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Part No: 363749R91)
$82.10

Farmall 350 Distributor Drive Shaft
Distributor Drive Shaft
- Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Part No: 353934R11)
$16.76

Farmall 350 Distributor Dust Cover
Distributor Dust Cover
- Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Part No: 353900R11)
$14.26

Farmall 350 Distributor Gear
Distributor Gear
- This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91 (Part No: 353902R1)
$33.00

Farmall 350 Distributor Hold Down Clamp
Distributor Hold Down Clamp
- For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Part No: 341139R1)
$9.00

Farmall 350 Distributor Insulating Terminal Washer
Distributor Insulating Terminal Washer
- Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a Distributor Insulating Terminal Washer. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Part No: 251538R1)
$6.06

Farmall 350 Distributor Rotor
Distributor Rotor
- For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: 353896R1)
$3.20

Farmall 350 Distributor Shaft Bushing and Shim Kit
Distributor Shaft Bushing and Shim Kit
- International Distributor Shaft Bushing and Shim Kit. Fits tractor models A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-Boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006 inches. (Part No: IHS3166)
$41.40

Farmall 350 Distributor Tach Drive Housing Block Off Plate
Distributor Tach Drive Housing Block Off Plate
- This new Distributor Tachometer Drive Housing Block Off Plate with Gasket is used with part number 363749R91 when a Tachometer is not used. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces 363764R1, 363765R1. (Part No: 363764R1)
$9.56

Farmall 350 Distributor Terminal Screw
Distributor Terminal Screw
- Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a zinc plated Terminal Screw. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. Replaces International part number 353907R1 (Part No: 353907R1)
$10.86

Farmall 350 Distributor Terminal Screw Insulator
Distributor Terminal Screw Insulator
- Used on IH Distributors 353898R1, 368051R1, 401107R1, this is a spring anchor terminal insulator. It will also fit J4 magneto above serial number 139748. It does not fit early J4 Magnetos. (Part No: 353906R1)
$6.86

Farmall 350 Distributor, New
Distributor, New
- Original IHC design comes with a 32 tooth drive gear. For tractor models Super W6TA, Super W9, Super WD6, Super WD6-TA, Super WD9, Super WDR9, W4, W400, W450, W6, W9, WD6, WD9, WDR9, WR9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 504, 600, 650, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 3514. R6332. MHSK1 (Part No: 107304C91)
$141.00

Farmall 350 Distributor, New
Distributor, New
- New and complete distributor comes with a 32 tooth gear, and is for tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA and other IH equipment with International Distributors. Replaces: 107296C91, 107299C91, 107302C91, 107304C91, 353890R91, Distributor Housing Casting Number: 353898R11, 354900R91, 357935R91, 362473R91, 362722R91, 364653R91, 364696R92, 366928R91, 372712R91, 380622R91. Uses IH points (included). (Part No: 107304C91)
$141.00

Farmall 350 Electronic Ignition Conversion Kit
Electronic Ignition Conversion Kit
- Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Part No: 1442P6)
$158.00

Farmall 350 Electronic Ignition Conversion Kit - 12V Negative Ground
Electronic Ignition Conversion Kit - 12V Negative Ground
- Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Part No: 1442)
$143.00

Farmall 350 H4 Magneto Pinion Driven Gear
H4 Magneto Pinion Driven Gear
- This gear has 24 teeth and measures: 0.380 inch inside diameter, 0.759 inch outside diameter, 1.075 inch gear outside diameter, 0.952 inch overall height. It is used on H4 Magnetos. (Part No: 49420DX)
$30.84

Farmall 350 Ignition Switch
Ignition Switch
- For the following Models using a magneto: Cub, Cub Lo-Boy, A, B, C, H, M, 100, 130, 140, 200, 230, 300, 350, 400. NOT like original. (Part No: 54207DB)
$8.19

Farmall 350 Key Switch, 2 Terminal
Key Switch, 2 Terminal
- With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Part No: 366313R91)
$18.76

Farmall 350 Magneto Coil Cover
Magneto Coil Cover
- For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 47449DAY)
$30.26

Farmall 350 Magneto Condenser
Magneto Condenser
- Condenser for IH Models using H4 F4, J4 Magneto (replaces 373892R91). For tractor models 100, 130, 200, 300, 350, W4, W6, A, B, BN, C, H, M. Note, this condenser will ship as one of two functionally identical versions shown, a long piece OR a short with an extension, depending on stock available. Replaces 21409DA, 21409DB, 354136R92, 373892R91, 47546D, 71455C91 (Part No: 71455C1)
$8.60

Farmall 350 Magneto Distributor Cap, H4 Magneto
Magneto Distributor Cap, H4 Magneto
- For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 47413DYC)
$18.00

Farmall 350 Magneto Gasket Set
Magneto Gasket Set
- This magneto gasket set is for H4 Magnetos. It contains; Coil cover gasket 47453D, Distributor body gasket 47408D, Distributor gear cover gasket 49419D, Condenser hole cover gasket 359966R1 (48472DA), Magneto mounting gasket 55780DE (55780DD). Replaces: 359966R1, 47408D, 47453D, 48472DA, 49419D, 55780DD, 55780DE, E4226. For tractor models A, AV, B, BN, C, H, HV, I4, I6, I9, M, MTA, MV, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, T4, T5, T6, T9, U2, U2A, U4, U6, U9, W4, W6, W6TA, W9, WR9, WR9S, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650, 400, 450 (Part No: MGK103)
$9.80

Farmall 350 Magneto Points
Magneto Points
- Point Set Fits J4 and H4 Magneto(can work with F4 magneto with modify) (Part No: 353171R91)
$8.16

Farmall 350 Magneto Rotor H4 Magneto
Magneto Rotor H4 Magneto
- This Rotor is used on tractors with H4 magneto. Replaces 47425DX, 47425DY, 47428DA (Part No: 47425DY)
$10.70

Farmall 350 Magneto Tune-up Kit For H4
Magneto Tune-up Kit For H4
- Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Part No: 21A10R)
$23.26

Farmall 350 Magneto or Distributor Drive Shaft
Magneto or Distributor Drive Shaft
- Verify part number before ordering. For tractor models (300, 350, 400, 450 all not used with hydra touch system), (H, HV serial number 268224 and up), (M, MD, MDV, MV all serial number 148867 and up), Super H, Super HV, (Super M, Super MTA not used with hydra lift, attached with engine driven pump). (Part No: 352079R1)
$92.68

Farmall 350 Magneto, New
Magneto, New
- This is a New Wico Magneto used on Farmall / IH Models: A, AV, B, BN, C, H, HV, I9, M, MTA, MTAV, MV, O4, O6, OS6, Super A, Super C, Super H, Super M, W4, W6, W6TA, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650. It is also used on some industrials and power units. (Part No: XH1344)
$552.40

Farmall 350 Spark Plug
Spark Plug
- Autolite Spark Plug 18MM Thread Diameter for: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. If you order 1, you will only receive 1 spark. You need to order 4 to receive 4. Replaces OEM number 360942R1. Also replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs. (Part No: AL386)
$2.90

Farmall 350 Spark Plug Wire Set, Custom
Spark Plug Wire Set, Custom
- IH or Delco Distributors and Magnetos. For the following models with 90 degree angle boots: A, I4, AV, Super A, Super A1, Super AV, SuperAV1, B, BN, C, Super C, Cub, Cub Lo boy, 154, 184, 185, H, HV, Super H, Super HV, M, MD, Super M, Super MD, Super MDV, MDV, Super MDVTA, MTA, Super MTA, MV, Super MV, Super MVTA, O4, O6, ODS6, OS4, OS6, T340, T5, T6, TD6, SuperW4, W4, Super W6, Super W6TA, W6, W6TA, Super WD6, WD6, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404, 424, 444, 450, W450, 504. Replaces the following OEMS: 352947R91, 352951R91, 352954R91, 352956R91, 356687R92, 356689R92, 356691R91, 356694R92, 356695R92, 356697R93, 362439R91, 362789R91, 407487R1, 45327DA, 46277DA, 50075D, 52794D, 65352D, 65357D, 65358D, and 65359D. (Part No: S.67475)
$16.76


NOTE
Starter
- Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE

No
Picture
Starter
- For (300 Eng. C-169, 1954-56), (350 Gas 1957-58), (I340, F350 LPG 1958-61). REBUILT Starter. 6 Volt. Add $50.00 core. This additional charge will be added to your order. (Part No: 1108041)
$355.00

Farmall 350 Starter Armature
Starter Armature
- Used with Delco Starter # 736C, 737B, 737G, 1107067, 1107074, 1107093, 1107169, 1107174, 1107404, 1107407, 1107408, 1107427, 1107430, 1107435, 1107444, 1107448, 1107462, 1107487, 1107490, 1107926, 1107999, 1108012, 1108016, 1108038, 1108041, 1108060, 1108080, 1108092, 1108097, 1108103, 1108112, 1108142, 1108158, 1108173, 1108174. Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. (Part No: 1871662)
$74.70

Farmall 350 Starter Drive
Starter Drive
- Replaces; 1877350, 1948877, 1933838, 800965. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21456, 21256, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 350, 3588, 3688, 3788, 4166, 4186, 450, 560, 6388, 6588, 660, 6788, 706, 756, 766, 786, 806, 815, 826, 856, 886, 915, 966, 986, Hydro 100, Hydro 186, Hydro 3488. With spiral shaft. (Part No: 1651487C1)
$37.26

Farmall 350 Starter Drive
Starter Drive
- This Starter drive fits gas engines for the following models: A, B, C, H, M, Super A, Super C, Super H, W4, W6, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450 Replaces OEM# 1107021, 1107412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 1107408, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. (Part No: 565549)
$33.32

Farmall 350 Starter Drive Housing
Starter Drive Housing
- This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Part No: 1878661)
$86.00

Farmall 350 Starter Drive Spring
Starter Drive Spring
- Spring, main drive, for starter 77695H. Tractors:Super A, C, Super C, H, M, Super M, 4, W4, 6, W6, Super W6, 100, 130, 140, 300, 330, 340, 350. For 100, 130, 140, 300, 330, 340, 350, 4, 6, C, M, Super C, Super M, Super A, W4, W6 (Part No: 1860639)
$32.00

Farmall 350 Starter Drive, Improved Style
Starter Drive, Improved Style
- This improved style starter drive is a positive ratchet style. For A, B, C, H, M, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450, Super A, Super C, W4, W6 all using the following starters 1107021, 2207412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 11074808, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Part No: 565549-New)
$28.91

Farmall 350 Starter Switch
Starter Switch
- Momentary Push Button Ignition Switch. Rubber boot covers push button, 2 screw type terminals, used extensively on I.H. equipment. Serves as starting, horn or reverse lock out switch. Used on various combines, windrowers, balers, cotton pickers, hay conditioners and grain platforms. Also used on Tractors: IHC: Fits: 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 4100, 4156, 4166, 4186; Industrial: 1206, 2656; Crawler: T4, T5, TD5. Replaces 366317R91, 366317R93GV (Part No: 366317R93)
$8.09

Farmall 350 Starter, 6V
Starter, 6V
- Delco type, 6V, Rotation: CCW, Teeth 10, IH TRACTORS: 300 Utility IHC C-169 Gas 1954-1956, 300HC Utility IHC C-169 Gas 1954-1956, 350 Utility IHC C-175 Gas / LPG 1954-1957, 350HC Utility IHC C-175 Gas / LPG 1954-1957, Farmall 300 IHC C-169 Gas 1954-1956, Farmall 350 IHC C-175 Gas / LPG 1956-1958, Farmall 350HC IHC C-175 Gas / LPG 1956-1958, Farmall 400 IHC C-264 Gas 1954-1956, Farmall 400HC IHC C-264 Gas 1954-1956, International W-400 IHC C-264 Gas 1954-1956, W-400HC IHC C-264 Gas 1954-1956. ADD $50.00 CORE. (Part No: 1108038)
$253.60

Farmall 350 Starting Button
Starting Button
- Attaches with eyelets and screws. For tractor models 240, 300, 330, 340, 350, 400, 404, 424, 444, 460, 504, 560, 606, 656, 660, 706, 806, 1206, 4100, 4156, 4166, 4186. (Part No: A36948)
$13.50

Farmall 350 Switch, Push Button
Switch, Push Button
- This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Part No: R7994)
$11.25

Farmall 350 Terminal Clip
Terminal Clip
- Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Part No: 79407H)
$6.86

Farmall 350 Tune Kit
Tune Kit
- This Tune Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: IHTK1)
$23.00

Farmall 350 Tune Kit, Basic
Tune Kit, Basic
- This Basic Tune Kit is for 4 cylinder gas engines with battery ignition from 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Part No: ATK5BIR)
$15.50

No
Picture
Wiring Harness
- WIRE HARNESS For 300, 350, AV, Super A (Part No: 358117R91)
$21.50

Farmall 350 Wiring Harness Main Assembly
Wiring Harness Main Assembly
- 12-volt diesel with 6 cables for Models 300 and 350. Manufactured to restoration standards. (Part No: 366839R91)
$143.52

No
Picture
Wiring Harness, Headlight
- Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models 300, 350, (400, 450 gas or diesel). (Part No: 362011R91)
$59.34

Farmall 350 Wiring Harness, Main
Wiring Harness, Main
- Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models 300, 350 both with gas engines. (Part No: 362019R91)
$131.43

No
Picture
Wiring Harness, Rear Light
- Reproduction of original with cloth covered laquered wire and cotton braid. For tractor models 300, 350, (400, 450 gas). (Part No: 362012R92)
$58.83



Farmall 350 Alternator Base Bracket Kit - Universal
Alternator Base Bracket Kit - Universal
- Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. Can be used with our 8NE10305SE alternator. (Part No: 2348258)
$41.26

Farmall 350 Alternator Conversion Plug
Alternator Conversion Plug
- Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$13.20

Farmall 350 Alternator Top Adjusting Bracket, Universal
Alternator Top Adjusting Bracket, Universal
- Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$25.50

No
Picture
Alternator, 12 Volt
- Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$83.00

Farmall 350 Battery Hold Down
Battery Hold Down
- For 8N, 9N, 2N, 2000, 3000, 4000, and others. (Verify battery measurements). Center to center mounting holes 10 1/8 inch. For batteries 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A)
$14.26

Farmall 350 Battery Hold Down J-Bolts, Pair
Battery Hold Down J-Bolts, Pair
- This Pair of Battery Hold Down Bolts each measure 10.5 inches long. Price is for a pair. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568. Replaces 98185A1. Also Universal for many other Battery Hold Down Brackets. (Part No: 393161R1)
$9.20

Farmall 350 Battery Joining Cable
Battery Joining Cable
- This cable is 2 gauge measuring 10 inches. (Part No: B204)
$18.75

Farmall 350 Battery Joining Cable
Battery Joining Cable
- This cable is 2 gauge measuring 18 inches. (Part No: B207)
$21.00

Farmall 350 Battery Joining Cable
Battery Joining Cable
- The cable is 2/0 gauge measuring 18 inches. (Part No: B1937)
$36.00

Farmall 350 Battery Joining cable
Battery Joining cable
- The cable is 2/0 gauge measuring 12 inches (Part No: B1936)
$29.25

No
Picture
Battery Thermal Wrap
- 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)
$35.98

No
Picture
Battery Thermal Wrap
- 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Farmall 350 Battery to Starter Cable
Battery to Starter Cable
- This cable is 2/0 gauge measuring 12 inches. (Part No: B1931)
$24.01

Farmall 350 Battery to Starter Cable
Battery to Starter Cable
- This cable is 2/0 gauge measuring 18 inches. (Part No: B1932)
$25.50

Farmall 350 Battery to Starter Cable
Battery to Starter Cable
- This cable is 2/0 gauge measuring 36 inches (Part No: B1934)
$38.25

Farmall 350 Battery to Starter Cable
Battery to Starter Cable
- This cable is 2/0 gauge measuring 48 inches. (Part No: B1935)
$52.50

Farmall 350 Cable, Battery to Starter
Cable, Battery to Starter
- This cable is 2 gauge measuring 8 inches. (Part No: B188)
$16.51

Farmall 350 Cable, Battery to Starter
Cable, Battery to Starter
- This cable is 2 gauge measuring 12 inches. (Part No: B189)
$15.01

Farmall 350 Cable, Battery to Starter
Cable, Battery to Starter
- This cable is 2 gauge measuring 18 inches. (Part No: B190)
$14.59

Farmall 350 Cable, Battery to Starter
Cable, Battery to Starter
- This cable is 2 gauge measuring 36 inches. (Part No: B192)
$18.01

Farmall 350 Cable, Battery to Starter
Cable, Battery to Starter
- This cable is 2 gauge measuring 48 inches. (Part No: B227)
$25.00

No
Picture
Coil
- This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$48.50

Farmall 350 Coil Bracket
Coil Bracket
- Universal Coil Bracket (Part No: R1940)
$6.60

Farmall 350 Coil, 12 Volt with Resistance
Coil, 12 Volt with Resistance
- This is a universal 12 volt coil with internal resistance. It can be used with 12 volt conversions if you don't want to put a resistor in line. Replaces 100402A, 70143, Delco 1115043, AA4879R, AA4983R, AT10399, D2AF12029AA, 1115043, 161861A, 189673M1, 189673M92, 353875R91, 395331R91, 395331R92, 396330R91, 396330R92, 396547R91, 396547R92, 396547R93, 396547R93, 74515665, AV101417, D5TE12029AB, 100402A, 1100-0540, 1100-0544, 1115043, 1200-0541, 1400-0565, 1700-0544, 189673V92, 25270, 70143 (Part No: 189673M1)
$14.50

Farmall 350 Coil, High Performance (Black), 12 Volt, Epoxy Filled
Coil, High Performance (Black), 12 Volt, Epoxy Filled
- Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40611)
$58.00

Farmall 350 Coil, High Performance (Black), 12 Volt, Oil Filled
Coil, High Performance (Black), 12 Volt, Oil Filled
- Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40511)
$58.00

Farmall 350 Coil, High Performance (Black), 6 Volt, Epoxy Filled
Coil, High Performance (Black), 6 Volt, Epoxy Filled
- Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Part No: 40111)
$73.50

Farmall 350 Coil, High Performance (Black), 6 Volt, Oil Filled
Coil, High Performance (Black), 6 Volt, Oil Filled
- Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Coil has 1.5 Ohms of resistance. (Part No: 40011)
$46.26

Farmall 350 Coil, High Performance (Chrome), 12 Volt, Epoxy Filled
Coil, High Performance (Chrome), 12 Volt, Epoxy Filled
- Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. (Part No: 40601)
$74.90

Farmall 350 Coil, High Performance (Chrome), 12 Volt, Oil Filled
Coil, High Performance (Chrome), 12 Volt, Oil Filled
- 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40501)
$76.60

Farmall 350 Coil, High Performance (Chrome), 6 Volt, Oil Filled
Coil, High Performance (Chrome), 6 Volt, Oil Filled
- 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms resistance. (Part No: 40001)
$59.40

Farmall 350 Coil, Ultra High Performance (Black), Epoxy Filled
Coil, Ultra High Performance (Black), Epoxy Filled
- Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Part No: 45111)
$59.40

Farmall 350 Coil, Ultra High Performance (Black), Oil Filled
Coil, Ultra High Performance (Black), Oil Filled
- Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using inchIgnitor IIinch electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Low 0.6 Ohm primary resistance. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Part No: 45011)
$49.00

Farmall 350 Coil, Ultra High Performance (Chrome), Oil Filled
Coil, Ultra High Performance (Chrome), Oil Filled
- Flame-Thrower II coils feature a very low resistance which make them the ideal coil for Ignitor II ignition systems as well as many other high performance ignitions. Low resistance and improved turns ratio help to produce up to 45, 000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy. These coils are also compatible with most capacitive discharge boxes including our own Second Strike. 0.600 ohms Primary Resistance, 9.00K ohms Secondary Resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Part No: 45001)
$68.80

Farmall 350 Coil-Universal 12V
Coil-Universal 12V
- Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or a 6 volt system without the resistor. Replaces 1115103, 1115339, 1115376, 1115380, 1115381, 1115385, 1115394, 1115396, 1115400, 178N, U505 (Part No: D5TE12029AB)
$15.26

Farmall 350 Coil-Universal 12V
Coil-Universal 12V
- Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt without resistor. Replaces: 396547R91 (Part No: D5TE12029AB)
$15.26

No
Picture
Distributor Terminal Insulator Assembly, Delco
- Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. (Part No: 1904376)
$18.00

Farmall 350 Magneto, Wico XH & XHD, Service & Parts Manual
Magneto, Wico XH & XHD, Service & Parts Manual
- Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$15.60

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$3.30

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$3.30

Farmall 350 Spark Plug
Spark Plug
- Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076)
$7.96

Farmall 350 Spark Plug
Spark Plug
- Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: AL425)
$3.00

Farmall 350 Spark Plug Wire Set, 4 Cylinder, Univeral
Spark Plug Wire Set, 4 Cylinder, Univeral
- Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. (Part No: S2097)
$19.50

Farmall 350 Spark Plug Wire Set, Universal - 6 Cyl.
Spark Plug Wire Set, Universal - 6 Cyl.
- Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, 500 ohms per foot stainless steel wire wound (“Mag Wire”) conductor. The lower resistance of 500 ohms per foot provides more potential energy to fire the spark plug under adverse conditions while preventing harmful RFI and EMI emissions. Also, the wire wound conductor never changes resistance. Longest Reach is 33 inches. This wire set is compatible with Electronic Ignition. (Part No: S66465)
$23.64

Farmall 350 Spark Plug Wire Set, Universal 6 Cylinder
Spark Plug Wire Set, Universal 6 Cylinder
- Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$22.00

Farmall 350 Spark Plug Wire Set, Universal, 4 Cyl.
Spark Plug Wire Set, Universal, 4 Cyl.
- Universal Spark Plug Wire Set, 4 Price: 13.59 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Part No: CPN12259)
$17.00

Farmall 350 Starter Solenoid
Starter Solenoid
- This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Part No: DR1467)
$21.11

Farmall 350 Starter, Generator, Distributor Tag, 6 Volt, Blank
Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$16.10

Farmall 350 Switch to Starter Cable
Switch to Starter Cable
- This cable is 2 gauge measuring 18 inches. (Part No: B194)
$12.01

Farmall 350 Switch to Starter Cable
Switch to Starter Cable
- This cable is 2 gauge measuring 24 inches. (Part No: B195)
$15.00

Farmall 350 Switch to Starter Cable
Switch to Starter Cable
- This cable is 2 gauge measuring 36 inches. (Part No: B196)
$21.00

Farmall 350 Switch to Starter Cable
Switch to Starter Cable
- This cable is 2/0 gauge measuring 18 inches. (Part No: B1938)
$27.75

Farmall 350 Switch to Starter Cable
Switch to Starter Cable
- This cable is 2/0 gauge measuring 24 inches. (Part No: B1939)
$31.50

Farmall 350 Switch to Starter Cable
Switch to Starter Cable
- This cable is 2/0 gauge measuring 36 inches. (Part No: B1940)
$40.51

Farmall 350 Switch, Push Button
Switch, Push Button
- This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Part No: R7994)
$11.25

No
Picture
Tag for Starter/Generator, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$16.10

Farmall 350 Voltage Regulator, 12 Volt
Voltage Regulator, 12 Volt
- 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Part No: 182548M92)
$19.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Electrical System

[Categories]   [All 350 Parts]   [All Farmall Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2021 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy