Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


International Harvester / Farmall 258 Parts

Category: Steering

[Categories]   [All 258 Parts]   [All Farmall Models]  


Farmall 258 Axle Support Bushing
Axle Support Bushing
- Used on Carraro 4WD front ends, this bushing measures 4.921 inches outside diameter, 4.527 inches inside diameter and is 1.653 inches long. Replaces OEM numbers K965756, K965265, 1-33-241-048, 9967992, K965265, CAR101575/1, CAR123477, CAR1015751, 9967992, 83930079, 83930554, R113767, 3541395M1 (Item #: 156131, Ref: CAR1015751) $92.58

Farmall 258 Ball Joint and Rod
Ball Joint and Rod
- This part is 7.540 inches long and M20 X 1.5 right hand thread. Used on: 238, 238 UK Series, 248, 248 UK Series, 258, 258 UK Series, 268, 268 UK Series, 288, 288 UK Series, 395, 395 UK Series, 485, 485 UK Series, 495, 495 UK Series, 585, 585 UK Series, 595, 595 UK Series, 685, 685 UK Series, 695, 695 UK Series, 743, 743 European, 745, 745 European, 745S, 785, 785 UK Series, 795, 795 UK Series, 844, 844 European, 844S, 844XL, 844XL European, 845, 845 European, 856XL, 856XL European, 885, 885 UK Series, 895, 895 UK Series, 995XL, 995XL UK Series. Replaces 1968463C1, 1868468C1, 1968468C1. (Item #: 104398, Ref: ZP0501310060) $49.80

Farmall 258 Bearing Assembly
Bearing Assembly
- On APL 335 Axles, the bearing is located behind the input gear set. It replaces OEM numbers 83945716, 83985018, ZP0750117352, 87387938, 268735, 5143109, ZP0735370350, 81214C1, 455387C91 (Item #: 180113, Ref: ZP0735370350) $178.00

Farmall 258 Bearing Assembly
Bearing Assembly
- On APL 335 Axles, the bearing is located behind the input gear set, closest to the back of the tractor. Measures 31.75mm inside diameter, 68.26mm outside diameter, 22.225mm wide. Replaces OEM part numbers 671031R91, K620116, 671032R1, ZP0735370840, 81232C1, 671033R1, 81231C1, 83985012, 86516897, AL71100, L60075, L60076, 86508082, 86505020, 86505016, 81820262, 81232C1, 81231C1, 671032R91, 671031R1, A153749, A153748 (Item #: 180111, Ref: ZP0735370840) $27.30

Farmall 258 Differential Pinion Bearing
Differential Pinion Bearing
- Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Item #: 112468, Ref: 81326C1) $42.10

Farmall 258 Differential to Axle Housing Seal
Differential to Axle Housing Seal
- On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 330 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref: E1NN3N267AA) $2.30

Farmall 258 Drive Shaft
Drive Shaft
- Used on ZF Axle APL335 this shaft is found on IH tractors 248, 258, 268, 288, 385, 485, 485XL, 585, 585XL, 685, 685XL, 695, 695XL, 743, 743S, 743XL, 745, 745S, 745XL, 785, 785XL, 795, 795XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 885, 885XL, 895, 895XL, 985, 985XL, 995, 995XL. Replaces ZP4472352075, ZP0769126310, 83949049, 81320C1 (Item #: 124728, Ref: ZP0769126310) $16.98

Farmall 258 Front Axle - Differential Housing Bushing
Front Axle - Differential Housing Bushing
- The measurements on this bushing are: 4.525 inches outside diameter, 4.127 inches inside diameter, 1.730 inches long. This bushing is used on Carraro 4WD front end. Replaces OEM numbers 101565, K965266, CAR1015651, 83945601, CAR101565/1, CAR123478, 83930062, 9967993, R113766, 3541396M1, 040953R1 (Item #: 156132, Ref: CAR1015651) $79.00

Farmall 258 Front Axle Pinion Shaft Seal
Front Axle Pinion Shaft Seal
- Used on APL 335 Mechanical Four Wheel Drive Axles, this seal is located at the input shaft to the differential. Replaces OEM numbers 83945747, ZP0750110088, 81233C1 (Item #: ZP0750110088) $32.27

Farmall 258 Hub Seal, Inner
Hub Seal, Inner
- Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref: ZP0750110147) $64.00

Farmall 258 Hub Seal, Outer
Hub Seal, Outer
- Used on many MFWD (mechanical four wheel drive) front ends, this seal has an Inside Diameter of 1.814 inches, Outside Diameter of 2.568 inches, and Width of 0.671 inches. It replaces OEM numbers 1429645, 81288C1, 81288C3, 83959483, ZP0750110134, AL61448, AL39338, 31372000, V31372000 (Item #: 104716, Ref: ZP0750110134) $17.40

Farmall 258 King Pin
King Pin
- Case IH models (248, 258, 268, 288, 385, 485, 485XL, 585, 585XL, 685, 685XL, 695, 695XL, 743, 743S, 743XL, 745, 745S, 745XL, 785, 785XL, 795, 795XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 885, 885XL, 895, 895XL, 985, 985XL, 995, 995XL) use this king pin with equipped with MFWD (Mechanical Four Wheel Drive) ZF Axle APL 335 and APL 735. Replaces OEM part numbers ZP4472352062, ZP4472352162, 81305C1, 83949007, 83946018, L61209, 380303020490, F380303020490, 81305C2, 380303000000 (Item #: 156196, Ref: ZP4472352162) $103.87

Farmall 258 MFWD Joint Assembly
MFWD Joint Assembly
- If you have a ZF Axle number APL335, this universal joint closest to the wheel, behind the hub. This was original equipment from 5/1984 - 1/1987 with APL335 Axle. Ford 5110, 5610, 6410, 6610, 6810, 7610. Replaces OEM numbers 83961173, 83946022, ZP7029910301, ZP0501205313, 1968452C1, 81307C1, 81307C2. (Item #: 156194, Ref: ZP7029910301) $586.00

Farmall 258 O-Ring \ Seal
O-Ring / Seal
- Made of Nitrile Rubber, this o-ring measures 7.874 inches inside diameter with a 0.118 inch thickness. It is used in many mechanical four wheel drive systems. Replaces OEM numbers 81313C1, 81326C1, 1-31-742-032, 71452157, E1NN1N050AA, 83927797, L40317, AL40317 (Item #: 156198, Ref: E1NN1N050AA) $7.10

Farmall 258 Planetary Gear
Planetary Gear
- Used in APL 335 and APL 330 Axles, on tractors with mechanical four wheel drive, the is the gear closest to the hub. Sold individually. Replaces OEM numbers ZP4472352014, ZP0769126276, 83946053, 81325C1. Used on International models: 238, 248, 258, 268, 288, 385, 395, 485, 485XL, 495, 495XL, 585, 585XL, 595, 595XL, 685, 685XL, 695, 695XL, 743, 743S, 743XL, 745, 745S, 745XL, 785, 785XL, 795, 795XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 885, 885XL, 895, 895XL, 985, 985XL, 995, 995XL (Item #: 124634, Ref: ZP4472352014) $118.84

Farmall 258 Planetary Ring Gear
Planetary Ring Gear
- Found on ZF Axle APL 335, this Planetary Ring Gear is used on CaseIH models 248, 258, 268, 288, 385, 485, 485XL, 585, 585XL, 685, 685XL, 695, 695XL, 743, 743S, 743XL, 745, 745S, 745XL, 785, 785XL, 795, 795XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 885, 885XL, 895, 895XL, 985, 985XL, 995, 995XL. Replaces 83954879, 83946031, ZP4472352168, ZP4472352058 (Item #: 124705, Ref: ZP4472352168) $571.00

Farmall 258 Power Steering Cylinder End
Power Steering Cylinder End
- From the center of the ball joint to the end of the tube, this power steering cylinder end measures 3.250 inches. It has M20 X 1.5 RH Thread. Used on 4WD front ends on 1046, 1246, 258, 268, 278, 584, 585, 585XL, 644, 684, 685, 685XL, 743, 743XL, 744, 744S, 745S, 745XL, 784, 785, 785XL, 844, 844S, 844XL, 856, 856XL, 884, 885, 885XL, 946, Hydro 84. Replaces 3146035R92, 3146035R1, 3146035R95, 3146035R91, 3146035R94 (Item #: 124614, Ref: 3146035R95) $93.24

Farmall 258 Power Steering Cylinder Rod
Power Steering Cylinder Rod
- Used on UK built International 2 wheel drive tractors, this part replaces 549668R1, 549668R2, 188851A1, 549668R3, 188854A1. Used on 238, 248, 258, 268, 288, 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 884, 885, 885XL, 895, 895XL, 995, 995XL, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84, Hydro 86, MX100C, MX80C, MX90C (Item #: 182916, Ref: 549668R1) $294.00

Farmall 258 Seal Kit, Power Steering Cylinder
Seal Kit, Power Steering Cylinder
- For 2 wheel drive models 454, 464, 574, 674, 484, 584, 684, 784, 884, 385, 485, 585, 685, 885, 595, 695, 995, 2400, C50, C60, C80, C90, C100, 4210, 4230, 4240. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 115098, Ref: 55355C91) $40.00

Farmall 258 Spindle Felt Seal
Spindle Felt Seal
- This Felt Washer is used with 405840R12 and 534288R91 Spindles. Fits tractor models 238, 248, 258, 385, 395, 454, 475, 474, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 685, 695, 885, 895, 3220, 3230, 4210, 4230 and 4240. (Item #: 102176, Ref: 15943DA) $2.30

Farmall 258 Spindle Nut
Spindle Nut
- Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N, 129-290, 88886, 427639, 88886 (Item #: 156038, Ref: 387930S36) $1.10

Farmall 258 Spindle Seal MFWD
Spindle Seal MFWD
- On Mechanical Front Wheel Drive tractors, the seal (o-ring) goes between the axle housing and the spindle. It is used on many ZF Axles. Replaces OEM part numbers 81296C1, 83946009, 8603728, 3147244R1, ZP0634303409, 1390411028, 81296C1, 1964258C1, 3147244R1 (Item #: 124682, Ref: 83946009) $0.50

Farmall 258 Spindle, L\R
Spindle, L/R
- This spindle works both Left hand and right hand. Shaft length 12.125 inch, shaft diameter 1.687 inch, inner bearing 1.375 inch, outer bearing .842 inch. For models 238, 248, 258, 385, 395, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 685, 695, 885, 895, 3220, 3230, 4210, 4230, 4240, C50, C60. The wheel bearing kit used for this spindle is part number WBKIH6. (Item #: 100844, Ref: 405840R12) $222.00

Farmall 258 Spindle, L\R
Spindle, L/R
- This spindle replaces both Right hand and left hand. 15.265 inches in length, A=1.687 inch, B=1.375 inch, C=.843 inch, .75 inch UNF thread. For tractor models 238, 248, 258, 454, 474, 475, 574, 674, 484, 584, 385, 485, 485XL, 585, 585XL, 395, 495, 595, 595XL. The wheel bearing kit used for this spindle is part number WBKIH6. (Item #: 100845, Ref: 527292R92) $260.00

Farmall 258 Steering Arm Assembly
Steering Arm Assembly
- For International / Farmall tractor models Hydro 84, 258, 268, 278, 385, 454, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2500, Replaces International OEM number 67499C91, (Item #: 158746) $476.00

Farmall 258 Steering Bar Assembly
Steering Bar Assembly
- For tractor models 238, 248, 258, 268, 288, 3210, 3220, 3230, 385, 395, 4210, 4220, 4230, 4240, 454, 474, 475, 484, 485, 485XL, 495, 495XL, 574, 584, 585, 585XL, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 785, 785XL, 795, 795XL, 84 Hydro, 884, 885, 885XL, 895, 895XL, 995XL. (Item #: 124616, Ref: 405580R11) $40.00

Farmall 258 Steering Motor, Hydrostatic
Steering Motor, Hydrostatic
- Models without relief valve. 248, 258, 268, 278, 385, 484, 485, 584 Indust/Const, 684, 685, 784, 884, 885. Replaces 67698C91, 67698C92, 67698C93, 67698C94 (Item #: 104262, Ref: 67698C92) $449.00

Farmall 258 Taper Roller Bearing
Taper Roller Bearing
- Measuring; Width - 0.548 inches, Inside Diameter - 3.740 inches, Outside Diameter - 5.315 inches, this bearing is used in ZF Axles on tractors with mechanical four wheel drive. This bearing also has other applications. Replaces OEM numbers: ZP0750117062, 5136951, 83946047, 81312C1, 83927807, 47539809, 1-31-741-019, 05136951, 85136951, 85806002, 1966169C1, CAR118378, 83983456, AL38099, RE45944, 819310, 819349/819310, 819349 (Item #: 156177, Ref: ZP0750117062) $70.00

Farmall 258 Tie Rod
Tie Rod
- A= 4.16 inch, B= M30 x 1.5 inch inside diameter right hand thread. For tractor models 258, 268, 278, 584, 585, 684, 784, 785, 884, 885, Hydro 84 all with 4WD. (Item #: 124763, Ref: 1502269C2) $54.98

Farmall 258 Tie Rod Assembly
Tie Rod Assembly
- This Tie Rod Assembly is used on Adjustable Straight Axles (52 Inches to 82 Inches Tread Width). It Replaces 3125171R2, 3125171R3, 1332805C2, 3116406R3, 3116406R4, 3116406R5, 3116321R93, 1538016C1. (Item #: 156878, Ref: 1538016C1) $131.18

Farmall 258 Tie Rod Clamp
Tie Rod Clamp
- Used on Farmall / IH models, this tie rod clamp fits 574, AV, AV1, A1, CUB, SUPER A, 100, 130, 140, 200, 230, 240, 2400, 248, 2500, 2504, 258, 3230, 340, 385, 404, 4210, 4230, 4240, 454, 474, 484, 485, 504, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 995 (Item #: 104368, Ref: 43747D) $17.50

Farmall 258 Tie Rod End
Tie Rod End
- This Tie Rod End is 9.750 inches long and has M22 x 1.5 inch right hand thread. It replaces original part number 1968464C1. (Item #: 124764, Ref: 1968464C1) $45.00

Farmall 258 Universal Joint
Universal Joint
- Measuring 27mm 1 1/16 inches) x 70mm (2 3/4 inches) this universal joint is used on the axle of APL 335, 325, 345, 350, and 300. Replaces OEM numbers ZP7029457207, 83964587, 84355357, ZP7029457210, 1342711C1, 81873051, 144465A1, 1342715C1, 83956476, ZP0501205345, 9968059, 247543A1, AL64126 (Item #: 124613, Ref: 1342711C1) $106.00



Farmall 258 Eaton Power Steering Pump Replacement
Eaton Power Steering Pump Replacement
- This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Farmall 258 Filter, Power Steering
Filter, Power Steering
- Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $12.60

Farmall 258 Power Steering Pump Pulley
Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.30

Farmall 258 Steering Wheel Spinner, Bare Aluminum
Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Farmall 258 Steering Wheel Spinner, Blue
Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Farmall 258 Steering Wheel Spinner, Green
Steering Wheel Spinner, Green
- Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.30

Farmall 258 Steering Wheel Spinner, Orange
Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Farmall 258 Steering Wheel Spinner, Red
Steering Wheel Spinner, Red
- Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Farmall 258 Steering Wheel Spinner, Yellow
Steering Wheel Spinner, Yellow
- Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black
- Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories]   [All 258 Parts]   [All Farmall Models]  







PayPal


Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2024 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy