Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 9N Parts

[ Show Pictures ]

[Categories]   [All Ford Models]   [Print]  


Brakes
Brake Cross Shaft Bushing - Measures 1 inch long, 1 inch inside diameter and .010 thick. Press into transmission housing {one on each side}. Sold each. For tractors: 9N, 2N, EARLY 8N {1939-1949}. Fits some later Ford models, verify measurements to ensure fit. (Part No: 782477)
$4.95

Brake Repair Kit - For tractor models 9N, 2N from 1939-1947. (Part No: 9N2065)
$28.50

Brake Shoe Set, Set of 4 - Set includes 4 Brake Shoes with bonded lining. For 9N and 2N. (Part No: 9N2019)
$81.51

Felt Brake Dust Seal - This Felt Brake Dust Seal is used on Ford 9N and 2N Tractors 1939 to 1947. It replaces original part number 9N2217. Two used per tractor. Sold individually. (Part No: 9N2217)
$6.50

Clutch
Clutch Alignment Tool - 1-3/8 inch 10 spline, .67 inch pilot. This clutch alignment tool is for tractor models with single clutch: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 1112-5996)
$7.56

Clutch Cross Shaft - This Clutch Cross Shaft is used in Ford 9N, 2N and 8N Tractors. Replaces original part number B7510A2 (Part No: B7510A2)
$30.96

Clutch Disc - Clutch disk measuring 9 inches with a 1 3/8 inch hub and 10 splines. This is a 6 spring clutch. Fits tractor models 8N, 9N, 2N, NAA (4 speed), NAB, 600, 700, 800, 900 (to serial number 14257), 1800, 2130. Improved from original by added springs. Also replaces 84365150, 91A7550, NAA7550A. (Part No: 91A7550WHD)
$38.07

Clutch Fork To Cross Shaft Pin - This Clutch Fork to cross shaft pin is 5/16 inch X 1 1/2 inches. It is used on Ford Tractors built between 1939 and 1964. Replaces 352581S8, 352581-S8, 352581S. (Part No: 352581S8)
$1.50

Clutch Kit, 9 Inch, Single Clutch - This 9 inch Clutch Kit contains 10 spline spring drive disc part number NAA7550A, 9 inch single pressure plate part number 8N7563, pilot bearing part number C5NN7600A, release bearing part number C0NN7580A and alignment tool. This clutch kit is for tractor models 1800, 1801, 2000 (4 cylinder 1962-1964), 2031, 2110TR, 2120, 2130, 2131, 4000 (4 cylinder 1962-1964), 4031, 4110TR, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, NAB. (Part No: 8N7563K)
$95.88

Clutch Pedal Bushing - 1 inch inside diameter. For 9N, 2N 1939-1947. Clutch Pedal Bushing. Replaces original part number 9N7508. (Part No: 9N7508)
$8.36

Clutch Release Shaft Fork - This Clutch Release Shaft Fork is used on Ford Tractors 1939 - 1954. Replaces original part number 487515, 48-7515. For models 9N, 2N, 8N, NAA and Jubilee. NOTE: This part is not made to OEM standards, and may require the bored holes to be honed slightly to fit. Unfortunately, we do not have a higher quality part available. (Part No: 487515)
$27.96

Clutch Shaft Bushing - This clutch shaft bearing has a 7/8 inch inside diameter. This clutch shaft bushing is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Transmission only). (Part No: 407508A)
$6.15

Pilot Bearing - This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: C5NN7600A)
$3.08

Pressure Plate - This 9 inch single pressure plate, flat flywheel type is for tractor models 1800, 2130, 8N, 9N, 2N, NAA, NAB, 600, 700, 800, 900 with a single clutch. (Part No: 8N7563)
$90.95

Release Bearing - This release bearing is for Ford Tractors with a 9 inch or 10 inch single clutch 1939 to 1964. It has an inside diameter of 2.0625 inches, an outside diameter of 3.515 inches, a width .7969 inches. It replaces 78-7580A, 787580A, 787580A8, C0NN7580A. (Part No: N1087)
$20.33

Release Bearing Spring - This Release Bearing Spring measures .627 inch outside diameter, 4.875 inch overall length and .095 inch wide diameter. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 820, 900, 901, 1801, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2110, 2111, 2130, 2131, 4030, 4040, 4031, 4110, 4121, 4130, 4131, 4140. Two are used per tractor. Sold and priced each. (Part No: 9N7562)
$3.95

Cooling System
Fan Belt - For tractor models 8N, 9N, 2N EARLY with Front Mount Distributor. Length is 44 1/8 inches. Alternator Belt for those tractors using our 12 volt conversion kit. (Part No: 9N8620B3-SL)
$5.00

Fan Belt - For tractor models 9N, 2N and early 8N with Generator and Front Mount Distributor. Not for tractors with alternator conversion. This belt is 46-1/8 inches long. (Part No: 9N8620B3)
$10.91

Fan Blade - 4 Blade - For tractor models 9N, 8N, NAA, Jubilee. Has 4 mounting holes on 3.125 inch centers. Diameter is 15.75 inch. (Part No: 8N8600A)
$33.47

Fan Blade, 6 Blade - For 9N, 8N, 2N, NAA, Jubilee. 6 Blade Fan for extra cooling in those hotter climates. (Part No: 9N8600D)
$54.03

Fan Shroud - For 8N, 9N, 2N. Metal Fan Shroud. (Part No: 2N8146)
$66.59

Fan Shroud Hardware Kit - This fan shroud hardware kit is used for mounting original Fan Shrouds on Ford Tractors, 1939-1964. The kit includes 7 screws and 7 washers. Some models listed use less than 7. (Part No: 357622-K)
$1.95

Radiator - This is a Restoration Quality radiator for the 9N, 2N and 8N models. This radiator replicates the original with lower cast connections and domed top tank, 4 rows of tubes, and Copper core. Replaces 8N8005. (Part No: 8N8005-R)
$270.78

Radiator - This is a Replacement High Quality Radiator. It is not exactly like original but will replace the original with no modification required (except if using a fan shroud). For 8N, 9N, 2N. Copper Core, 3 rows of tubes, weight 16 lbs. Drain cock included. 1 year warranty. DOES NOT COME WITH CAP. The Original or Replacement Fan Shroud will not fit this radiator without some modification to the fan shroud. This modification consists of trimming the inside of the bottom of the fan shroud. This is a replacement radiator for OEM part number 8N8005. (Part No: 8N8005)
$193.13

Radiator Cap - Plain, Conventional Type 4 psi Pressure Cap, less ornament. For tractors 8N, 9N, 2N. (Part No: 2N8100A-LW)
$11.22

Radiator Cap, Black - For 8N, 9N, 2N with pressurized system. Winged Radiator Cap. (Part No: 2N8100A)
$8.76

Radiator Cap, Chrome - For tractor models 8N, 9N, 2N with pressurized system. Winged Radiator Cap, Chrome. (Part No: S.61615)
$11.84

Radiator Hood Pad - These Radiator Hood Pads fit models 8N, 9N, 2N. One pad is used at the top of the radiator. (Part No: 2N8032)
$2.46

Radiator Hose Clamp - This radiator hose clamp is an EXACT reproduction of the ORIGINAL hose clamp. This radiator hose clamp is for tractor models 8N, 9N, 2N (1939 to 1954), NAA, Jubilee (2 per tractor, 1953 to 1954). For 1 3/4 inch to 2 inch outside diameter hoses. Also works on other Ford 4 Cylinder tractors through 1964. Priced each. Replaces 608287. PLEASE NOTE: Original hoses are usually thicker than current hoses available for many antique tractors. Measure your current outside diameter to ensure fit. You can add electrical tape to the ends to have these original style clamps effectively tighten on newer (thinner) hoses. (Part No: 608287)
$3.05

Radiator Hose, Lower - This lower radiator hose goes from the water pump to lower radiator. Hose is 1 1/2 inch inside diameter. For tractor models 2000, 4000, NAA, 2N, EARLY 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 312588)
$6.93

Radiator Hose, Upper - Hose, Cylinder Head to Radiator Upper. For tractors 9N, 2N and 8N. (Part No: 2N8260)
$4.49

Radiator Mounting Bolt Kit - These Radiator Mounting Bolts are used on aftermarket radiators to mount the radiator to the front support. Kit includes 2 Carriage Bolts, 2 Nuts, 2 Lock Washers and 2 Washers. For tractor models: 2000 4 cylinder, 2N, 4000 4 cylinder, 8N, 9N, Jubilee, NAA, NAB, 600, 601, 800, 801, 2030, 2031, 2120, 2130, 2131, 4030, 4031, 4120, 4121, 4130, 4131 4 cylinder. Replaces Nut 34670, 34090S, Flat Washer 44732, Lock Washer 34808, Carriage Bolt 351655S8. (Part No: 351641S8)
$5.63

Radiator Mounting Pads, Pack of 2 - This pack of 2 radiator mounting pads is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. Two are used per tractor on the bottom of the radiator. (Part No: 180705M1)
$2.66

Thermostat - This thermostat is 160 degree lo-temperature. For tractors models 8N, 9N, 2N. Fits in upper radiator hose with the pointed end towards the front of the tractor. Thermostat is 2.250 inches long. Replaces 181634M1, B2NN8575A, 9N8575A3 (Part No: B2NN8575A)
$21.89

Water Pump - For tractor models 8N, 9N, 2N. Comes with pulley, rear cover plate and gasket. Pulley will accommodate a 1/2 inch or 5/8 inch belt. Replaces 8N8501A, CDPN8501AGV, CDPN8501A. (Part No: CDPN8501A)
$42.02

Water Pump Cover plate Gasket - Tractors: 8N, 9N, 2N (Part No: 9N8507)
$.68

Water Pump Kit - This water pump repair kit is for tractor models 8N, 9N, 2N, NAA, Jubilee (Part No: CPN8591B)
$51.05

Water Pump Mounting Gasket - Gasket, Pump rear to Cylinder Block. Tractors: 8N, 9N, 2N. (Part No: 9N8513)
$2.37

Water Pump Pulley - For tractor models 9N, 2N. (Part No: 9N8606)
$36.86

Water Pump Sealant - RTV Blue 3.35 oz. tube. (Part No: PRM77BR)
$8.45

Decals and Emblems
Data Plate - Patent Data Plate, with drive screws to install. Restoration Quality. For tractors: 9N, 2N, {1939-1947}. (Part No: 9N14001)
$6.05

Decal , Fender Set - For 8N, 9N, 2N. Each decal is approximately 8-3/4 inches wide by 3-1/4 inches tall. Fender Decals (2) Red Ford Script. (Part No: R2006)
$15.00

Decal Set - Combination Vinyl Decal Set For tractor models 8N, 9N and 2N (1939-1952). Set of 10 self adhesive decals. Contains decals for air cleaner, oil filter, position control, PTO warning, hood sides (Red Ford Name 2-1/4 inches x 5-1/4 inches), fenders (Red Ford name 3-1/4 inches x 9 inches) and tachometer. (Part No: R2008)
$29.25

Decal Set - For 8N, 9N, 2N, all 1939-1947. Decal set for the Air Cleaner, Oil Filter Position (2) and PTO Warning. (Part No: FO1)
$11.25

Decals, Hood Set - For tractor models 8N, 9N, 2N, 1947-1952. Hood Decals (2) Red Ford Script. (Part No: R2005)
$12.00

Grill Emblem - This Ferguson System Grill Emblem was used between 1939 and 1947. Replaces original part number 9N8215 (Part No: 9N8215)
$24.95

Hood Emblem - Two piece emblem set says "Ford" and "Ferguson System", includes 355870-S speed nuts. Cast aluminum, dull finish with black outline and lettering. For tractors 9N & 2N. (Part No: 2N16600)
$23.61

Hood Emblem - This is a New Ford Hood Emblem Blue with Chrome. Ford 1939 - 1942. Replaces Original Part Number 9N16600S (Part No: 9N16600S)
$26.21

Drive Train
Axle Bearing Assembly - For tractor models: 8N, 9N, 2N, NAA, Jubilee. This includes rear axle bearing (2N4221) and cup (9N4222). (Part No: S.18516)
$41.42

Axle Collar - This axle collar measures 2 3/4 inches outside diameter, 2 inches inside diameter and 11/16 inches thick. For tractor models 9N, 2N. (Part No: 9N4132)
$11.24

Axle Rear Bearing Race - This Tapered Bearing Cup is for models 4120, 600, 800, 8N, 9N, 2N, Jubilee, NAA. (Part No: 9N4222)
$14.38

Countershaft - For 9N, 2N, both with 3 speed transmission. Countershaft. (0621R) (Part No: 9N7111)
$138.02

Differential Bearing and Cup - This Differential Bearing and Cup is used on Ford 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA and other. Replaces original part numbers B4222, BB4222, BB4221B, 510884, 510892, 81709463, 83402421. (Part No: 195159M1)
$23.69

Differential Gasket Kit, 6 Pieces - Fits 8N, 9N, 2N. 6 Piece Set. Includes: (1) 9N502, (1) 9N611, (2) 2N4035, (1) C5NN747A, (1) 9N4662, (1) 181217M3 (Part No: DGK928)
$10.10

Differential Pinion Bearing Cone - For tractor models 2000 1965>, 2N 1939-1952, 3000 1965>, 4110 1965>, 600 with 4 speed transmission serial number <54165 - 1958, 5 speed transmission serial number <196155 - 1959, 601 with 4 speed transmission serial number 54166> -1958-1962, 5 speed transmission serial number 106116> - 1960-1964, 8N 1939-1952, 9N 1939-1952, Dexta 1957-1964, NAA 1953-1954. Replaces BB4221B, 510884. (Part No: BB4221B)
$31.71

Differential Pinion Bearing Cup - Bearing Cup, Differential Bearing. For 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA Replaces BB4222, BB4222B, 510892. (Part No: BB4222)
$15.21

Differential Pinion Bearing Cup, Front - For tractor models 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, Dexta 1957-4/1962, NAA, Jubilee 1953-1954. (Part No: BB4616B)
$41.83

Differential Pinion Cone, Front - Bearing, Tapered Cone. For tractor models 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, Dexta 1957-4/1962, NAA, Jubilee 1953-1954. (Part No: BB4621B)
$72.56

Differential Pinion Pilot Bearing - This differential pinion pilot bearing is for tractor models 2N (1939 to 1952), 4120 with 4 speed transmission serial number 54166> - 1959>, 5 speed transmission serial number 106115> - 1959>, 800 with 4 speed transmission serial number <54166 - 1958, 5 speed transmission serial number <106115 - 1960, 801 with 4 speed transmission serial number 54166> - 1959>, 5 speed transmission serial number 106115> - 1959>, 8N (1939 to 1952), 9N (1939 to 1952). (Part No: BB4625B)
$80.83

Gasket, Drain Plug - Hydraulic and Transmission Drain plug Gasket. 2 inch inside diameter. Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Part No: 8N7011)
$1.38

Gasket, Main Drive Gear Bearing Retainer, Pack of 5 - For tractor models 8N, 9N, 2N, NAA, Jubilee, NAB. (Part No: 9N7086)
$5.70

Gear Shift Boot - Transmission Gear Shift Lever Boot. For tractors: 8N, 9N, 2N, NAA. Bottom hole is 1-1/2 inches in diameter. (Part No: 8N7277)
$5.95

Gear Shift Boot - This gear shift boot has a bottom hole that is 7/8 inch diameter. For 9N, 2N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be used to replace 9N7277. (Part No: C5NN7277C)
$2.60

Gear Shift Lever Spring - This gear shift lever spring fits tractors with a 3 or 4 speed transmission, or 4 speed Torque Converter Transmission, It is 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wide diameter. It is for tractor models 8N, 9N, 2N. (Part No: 9N7227B)
$5.95

Gear Shift Pin - This gear shift pin fits tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (>1965 ) with 3 and 4 speed transmission). (Part No: 9N7221B)
$4.13

Input Drive Shaft - This Input Drive Shaft has 10 Splines, 20 Helical Teeth. It is used on 3 and 4 speed transmissions on Ford: 8N, 9N, 2N, NAA, 500, 600, 700, 800, 900. It replaces original part number 2N7017A. (Part No: 2N7017A)
$259.70

Oil Seal, Main Drive Gear - This main drive oil seal is for 3 and 4 speed transmissions on tractor models: 8N, 9N, 2N, 600, 700, 800, 900, NAA, NAB, Jubilee. Measures 2 inches outside diameter, 1.34 inches inside diameter and .332 inches wide. `` Replaces part number: 8N7052A, 8N7052A2, C0NN7C248A. (Part No: 8N7052A)
$4.91

Rear Axle Housing Gasket, Outer, Pack of 10 - Pack of 10. Fits Ford 8N, 9N, 2N, NAA and Jubilee. Replaces 9N4130, 8N4229E and 8N4229. Used for seal between bearing retainer and axle housing or backing plate. More than one may be required when used as 8N4229 shim. Thickness 0.016 inches. (Part No: 9N4130)
$6.90

Rear Axle Outer Seal - Oil Seal, outer, rear axle shaft. Inside diameter 2 3/8 inches. For tractors 9N, 2N, (1939-1947). 2.437 inch inside diameter, 3.485 inch outside diameter. For 9N, 2N. (Part No: D6NN4251A)
$4.31

Rear Axle Sure-Seals - Fits 9N, 2N. 1 pair. No need to split collar and replace old outer axle seal. Sure-Seal fits over top of sweat collar. (Part No: SS92)
$15.06

Rear axle housing gasket - This "Trumpet Gasket" is the center housing to rear axle housing. Tractors: 8N, 9N, 2N. (Part No: 2N4035)
$1.91

Sherman Transmission External Lever - Step Up/Step Down Lever. For Tractors with Sherman transmission. Replaces 10A909, 9N7210. For models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900 and 901. (Part No: 9N7210)
$93.09

Shifter Cable - This is a Sherman Transmission Shift Cable with Knob. It is 3/8 inches, 24 NF inner ends and 1/2 inch, 20 NF outer end thread. 31-1/2 inches overall length. It is used on 9N, 2N and 8N tractors with Sherman high/low transmissions. (Part No: SHERMAN-1)
$69.85

Shim for Bearing Retainer - This is a Steel Shim, .020 thick. It has 12 holes. Will work in 6 hole applications. Fits Ford 8N, 9N, 2N, NAA and Jubilee, 8N4229F and 8N4229. More than one may be required when used as 8N4229F shim. Thickness 0.020 inches. Price is for each. (Part No: 183261M1)
$3.09

Side Cover Gasket, Pack of 10 - This Side Cover Gasket fits the following tractor models as a side cover gasket and a PTO shift cover gasket: 2000, 4000, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee and NAA. Replaces part number 9N4131. (Part No: 9N4131)
$7.65

Transmission Bearing - Main Pilot Shaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, 9N, NAA, Jubilee, NAB. (Part No: 9N7120)
$79.51

Transmission Bearing Cone - Main Drive Shaft and Countershaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Part No: 9N7066)
$13.59

Transmission Bearing Cup - Main Drive Shaft and Countershaft Bearing Cup for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Part No: 9N7067)
$8.28

Transmission Case to Center Housing Gasket - For tractor models 9N, 8N, 2N. (Part No: 9N4662)
$2.19

Transmission Drain Plug - Has 2.5 inch outside diameter. For tractors: 8N, 9N, 2N, NAA, {1939-1954}. Also filler plug for tractor: NAA {1953-1954}. Gasket available, order part number 8N7011. Replace 9N7010, 8N7010. For a magnetic version of this plug, order 8N7010 (Part No: 9N7010)
$8.06

Transmission Drain Plug, Magnetic - Used on Ford tractors 1939-1964, this part has the same measurements as part number 9N7010 (2 inch-12 UN Threads) but is also magnetic to collect small metal particulate. Includes gasket. (Part No: 8N7010)
$12.50

Transmission Rebuild Kit - For tractor models 9N, 2N and 8N with 3 and 4 speed transmissions (1939-1952). Will also work for Jubilee except for the transmission to rear end gasket. This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. Contains (2) 9N7086, (1) 9N4662, (1) D5NN7223A, (1) 9N7223B, (1) 8N7052A, (1) 15385-TIM, (4) 25877, (4) 25820-TIM. Replaces: 9N7066, 86516471, 9N7086, 9N7086A, 9N7086GV, 9N7120, 9N7120GV, 81804773, 8N7052A, 8N7052A2, C0NN7052A, 83945495, 9N7067, 9N7067GV, 517512, 241336, 605188, 9605470, 9N4662, 9N4662GV, 9N7223, 9N7223B, 8N7223, D5NN7223A, E6NN7223BA, 83958318, 81817212. (Part No: TSBK3952)
$162.15

Electrical System
12 Volt Conversion Kit, Front Mount Distributor - 8N, 9N, 2N. Updates older 6-volt tractors to 12-volt charging system. For 9N, 2N, (early 8N 1948-1951) with Front Mount Distributor (distributor is right behind radiator), to serial number 263843. Kit includes rebuilt unicharge alternator with pulley and self exciting regulator, resistor, 12 Volt coil, wiring harness, top alternator bracket, alternator base bracket, alternator adjusting arm, belt, and instructions. Note, using the brackets in this kit may require trimming of the conduit your spark plug wires run through. Many tractors no longer have this conduit. If you would like avoid the possibility of have to make that minor modification, use 8NE10302-F top bracket (not included). Will not work if you have a magneto. (Part No: 8NE10300ALT-C)
$148.45

Alternator Adjustable Arm - Alternator Adjusting Arm. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Part No: 8NE10304)
$8.57

Alternator Base Bracket - Alternator Base Bracket. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Part No: 8NE10303)
$11.91

Alternator Pulley - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. All using 12 Volt conversion kits with a Delco single wire alternator. Pulley, single groove 5/8 inches wide. The diameter varies from our different suppliers. This measures about 2 5/8 inches outside diameter, give or take about a 1/4 inch. This should be fine and within the adjustability of the Alternator Adjusting Arm. Replaces 98NAA5825. (Part No: AFD5035)
$11.18

Alternator Top Bracket - Alternator Top Mounting Bracket. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Part No: 8NE10302)
$9.20

Alternator Top Bracket - When Converting your 9N, 2N or early 8N tractors with front mount distributor, to an alternator, this bracket can be used instead of 8NE10302 to avoid the possibility of having trim the spark plug wire conduit. (Part No: 8NE10302-F)
$29.50

Alternator, 12 Volt - 12 Volt, 63 Amp Alternator replacement for systems that have been previously modified to 12 volts. Does not include hardware. Simple 1-wire "self exciting" alternator has internal voltage regulator (easy to wire). 10SI Type Configuration. (Part No: 8NE10305SE)
$76.69

Base Alternator Bracket - Base Alternator Bracket. For 8N, 9N, 2N. (Part No: 8NE10303)
$11.91

Battery Cable - 2 gauge. For tractor models 9N, 2N (from 1940). This cable is a battery to starter and is 21 inches long. (Part No: 9N14300C)
$17.67

Battery Cable - For 8N, 9N, 2N. Ground Strap. 5.5 inches center to center. (Part No: D1NN14301H)
$14.18

Battery Cable - This Battery Cable is 12 1/2 inches long and is 2 Gauge. For models (600, 700, 800, 900, 1958-1964), (2000, 4000 all before 1964). Ground Cable. (Part No: D1NN14301G)
$11.70

Bearing, Generator Front - BEARING, BALL Bearing, Generator, Front End. For 3 Brush Generator. For early 8N, 9N, 2N. Measures .59 inches inside diameter and 1 3/8 outside diameter. Verify Measurements. (Part No: E27N10094B)
$10.18

Cable, Starter to Switch - Switch to starter cable, 14-1/2 inches long and 2 gauge. For 9N, 2N, 601, 701, 801, 901, 600, 700, 800, 900, NAA, 2000, 2031, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4120, 4130, 4140, 501, 541. Replaces FAA14431B. (Part No: 9N14431B)
$9.29

Coil - Six Volt - For tractor models 8N (1939-1950), 9N, 2N with Front Mount Distributor. Order 9N12104 gasket set separately if mounting gasket is needed. (Part No: 9N12024)
$14.87

Coil - Six Volt with Script - The is an officially licensed Ford 6 Volt Coil, with raised Ford script. Replaces 9N12024. Order 9N12104 gasket set separately if mounting gasket is needed. (Part No: 9N12024S)
$36.71

Coil, 12-Volt - For 8N, 9N, 2N (serial number up to 263843. Front Mount Distributor 12 Volts. Order 9N12104 gasket set separately if mounting gasket is needed. Replaces 9N12024-12V. (Part No: 12VOLTCOIL)
$27.03

Condenser - Fits 8N, 9N, 2N with Front Mount Distributor. (Part No: A0NN12300A)
$2.31

Distributor Assembly, Complete - For 9N, 2N, (8N all front mount serial number up to 263843). Includes: points, condenser and distributor cap. Does not include coil or mounting gaskets. (Part No: 9N12100)
$102.75

Distributor Breaker Plate - Breaker Assembly, complete with points. For 8N, 9N, 2N. For Front Mount Distributor. Please note that suppliers have been replacing distributors, distributor base assemblies and breaker plates with after market parts for some time and the mounting screw that comes into the side of the distributor is slightly higher. This may require some modification if your mounting screw does not line-up. (Part No: 9N12150)
$29.64

Distributor Breaker Plate Retainer Clip - For tractor models 8N, 9N, 2N (Front Mounted Distributor). (Part No: 91A12146)
$2.21

Distributor Bushing, FRONT - Front Distributor Bushing is for FRONT MOUNT DISTRIBUTOR only. For 9N, 2N, early 8N. (Part No: 9N12120)
$3.38

Distributor Bushing, REAR - Bushing, (rear), for Front Mount Distributor, 8N, 9N, 2N. (Part No: 18-12132)
$4.95

Distributor Cap - For tractor models 8N, 9N, 2N to serial number 263843 all with Front Mount Distributor. Distributor Cap. (Part No: 9N12106C)
$12.24

Distributor Cap Terminal Kit - Distributor Cap Terminal kit for 8N, 9N, 2N with Front Mount Distributor Electronic Ignition Conversion Kit. (Part No: 1247XTTERM)
$19.86

Distributor Cap with Pertronix Coil Modification - Pertronix Distributor Cap for 8N, 9N, 2N with Front Mount Distributor THAT HAS BEEN CONVERTED TO AUTOMOTIVE STYLE KIT WITH A PERTRONIX 1247XT KIT. (Part No: 1247XTCAP)
$30.95

Distributor Clamp Rivet - This Distributor Clamp Rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Part No: B12145)
$0.95

Distributor Clip Pair - For tractor models 8N, 9N, 2N (Early). Price is for two. Replaces 9N12144. (Part No: 9N12144)
$3.17

Distributor Coil Bail - For tractor models 8N, 9N, 2N with Front Mount Distributor. (Part No: 9N12137)
$2.07

Distributor Drive Gear - For tractor models 8N, 9N, 2N. Gear for Distributor Drive On Camshaft (Part No: 7RA6255)
$28.10

Distributor Gasket Kit - For tractor models 8N, 9N, 2N prior to serial number 263844. Kit contains distributor breaker cover gasket, distributor base gasket, distributor coil base gasket, cap gasket. Replaces: 9N12104, 91A12114, 9N12140A, 9N12143, 9N12276B (Part No: 9N12104)
$3.42

Distributor Rotor, Front Mount Distributor - Fits 8N, 9N, 2N with Front Mount Distributor. (Part No: B2NN12200A)
$3.84

Distributor, Cam and Weights Assembly - Distributor Shaft with Cam and Weights attached for 9N12100 Front Mounted Distributor. For use on Ford tractor models 9N, 2N, and 8N before serial number 263843, 1939 to 1950. (Part No: 9N12187)
$44.43

Electronic Ignition Conversion Kit - 6V Positive Ground - Electronic Ignition Conversion Kit. For 8N, 9N, 2N with FRONT Mount Distributor only. For tractors with 6-volt POSITIVE ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. (Part No: 1247P6)
$135.70

Electronic Ignition Conversion Kit - 6V Positive Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system. For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 6-volt positive ground only. This electronic module replaces your points and condenser, also includes 40, 000 volt coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1247XTP6)
$229.58

Electronic Ignition Conversion Kit -12V Negative Ground - Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system.. For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser, also includes 40, 000 volt coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1247XT)
$219.17

Electronic Ignition Conversion Kit, 12 volt negative ground - Electronic Ignition Conversion Kit - For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1247)
$125.25

Electronic Ignition Replacement Module - This is a replacement module for the 1247XT electronic ignition kit. Does not have the magnetic sleeve for the rotor shaft. (Part No: 1247XT0)
$78.49

Generator Cut Out Assembly - Cut Out Assembly. For 9N, 2N. (Part No: B0NN10505A)
$12.06

Generator, 6 Volt - New Generator with Pulley. For 8N, 9N, 2N. Single terminal, 6 Volt, 2 brushes. (Part No: 8N10000)
$91.62

Key Switch - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3/4 inch hole. Keyed Ignition Switch comes with 2 Keys. (Part No: 8N3679C)
$7.46

Pulley, Generator - Pulley, Generator (threaded). For 8N, 9N, 2N. (Part No: 9N10130B)
$26.21

Resistor - For 8N, 9N, 2N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in our 12 volt conversion kits. This resistor tests at .6 ohms under load through a distributor. (Part No: 8NE10306)
$3.29

Resistor Assembly, Ignition Coil - For tractor models 9N, 2N. Resistor measures .5 ohms. (Part No: A8NN12250B)
$16.29

Spark Plug - For 8N, 9N, 2N, NAA, NAB, Jubilee, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL before 1965). SPARK PLUG. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. Replaces Autolite AL437, AL82, Bosch WR9FC and Champion H14Y and H18Y. (Part No: AL437)
$1.85

Spark Plug Wire Bracket - For tractor models 8N, 9N, 2N, (1939 to 1950). (Part No: 9N14564)
$4.95

Starter Drive - New improved design Starter Drive, for 8N, 9N, 2N (1939 to 1952). (Part No: 52-11350C)
$26.09

Starter Post Kit - This kit replaces the wire post on Ford starters, 1939 to 1964. Replaces C7NF11102A, 1811107B, 86512984, 6810044. (Part No: A9AZ11102B)
$6.98

Starter Repair Kit - For 8N, 9N, 2N. Starter Repair Kit contains all parts necessary for repair of starter part number 8N11001. (Part No: SRK401)
$13.62

Starter Switch - For 9N serial number <12499 1939 to 1940. Starter Switch (push type). Replaces: 1996487 Delco, 405C Delco. (Not the same as Triangular 9N11450B 1940 to 1947) (TIS DR405C). (Part No: 9N11450A)
$7.71

Starter Switch, Restoration Quality - Fits 9N, 2N with Safety Start. 2-3/4 inches center to center. (Part No: 9N11450B)
$17.99

Starter, 6 Volt, Less Drive - Starter, less drive. For 8N, 9N, 2N, with 6 volt systems. Restoration quality. (Part No: 8N11001)
$102.58

Starter, 6 and 12 Volt, With Drive - New Starter for 8N, 9N, 2N. 12 Volt. Complete starter includes starter drive. This new design performs great for 6 or 12 volts due to better internal parts than the original. (Part No: 8N1100R)
$118.61

Tune Kit - This Tune Kit is for tractor models 9N, 9N, 2N, and Early 8N, all with Front Mount Distributor. Tune Up Kit, Autolite. Includes: point set, condenser, rotor and (4) 437 Autolite Spark Plugs and gaskets. Verify correct spark plug size and type (Part No: 309786)
$17.34

Tune Kit, Basic - This Basic Tune Kit has points, condenser and rotor for Front Mount Distributor. For 9N, 2N and Early 8N. (Part No: ATK6FFR)
$9.24

Tune Kit, Basic - This Basic Tune Kit for a 4 cylinder gas contains Premium Blue Streak points (A0NN12107ABS), rotor, condenser, and gauge for Front Mount Distributor on 2N, Early 8N, and 9N. (Part No: APN12000ABSR)
$34.95

Wiring Harness - Has woven fabric casing. For 2N (1943 to 1947) with single pole generator. Also for 9N with single pole generator. Ignition Wiring. Replaces 86618153, 2N14401 and 9N14401C. (Part No: 2N14401)
$19.19

Wiring Harness 12 Volt - Wiring Harness for 2N, early 8N, and 9N front mount distributors tractors that has been converted to 12 Volt. Does not include light wiring. There are many different ways to wire a 12 volt conversion and this is the wiring harness provided in our 12 volt conversions set. It may be different than how your 12 volt conversion was done if not done with our kit. (Part No: 8NE10301)
$22.41

Wiring Harness, Restoration Quality - Main Wiring Assembly with Ignition Light Wire. Original style braiding with soldered terminals. Made in the USA. For tractor models 9N, 2N with single terminal generator. Replaces 9N14401B. (Part No: 9N14401B)
$167.77

Engine Bearings
Main Bearing Set, .010 - .010 inch Main Bearing Kit. 1 kit used per engine. Contains center, front, and rear bearings. For 8N, 9N, 2N. (Part No: MBK9N633E-010)
$53.13

Main Bearing Set, .020 - .020 inch Main Bearing Kit. 1 kit used per engine. Contains center, front, and rear bearings. For 8N, 9N, 2N. (Part No: MBK9N633G-020)
$54.28

Main Bearing Set, .030 - .030 inch Main Bearing Kit. 1 kit used per engine. Contains center, front, and rear bearings. For 8N, 9N, 2N. (Part No: MBK9N633-030)
$54.28

Main Bearing Set, .040 - This .040 inch oversize Main Bearing Set is complete for 1 engine. Contains center, front, and rear bearings. For tractor models 8N, 9N, 2N. (Part No: MBK9N633-040)
$32.40

Main Bearing Set, .060 - 1 kit used per engine. Contains center, front, and rear bearings. For tractor models 2N, 8N, and 9N. (Part No: MS-120P-060)
$62.10

Main Bearing Set, Standard - Standard Main Bearing Kit. 1 kit used per engine. Contains center, front, and rear bearings. For 8N, 9N, 2N. (Part No: MBK9N633A-STD)
$54.28

Rod Bearing Pair, .001 - For tractor models 8N, 9N, 2N. 1 Pair for one Rod. Order 4 for a complete engine. (Part No: 9N6211B-PAIR)
$9.00

Rod Bearing Pair, .002 - For tractor models 8N, 9N, 2N. 1 Pair for one Rod. (Part No: 9N6211C-PAIR)
$9.66

Rod Bearing Pair, .010 - For tractor models 8N, 9N, 2N. 1 Pair for one Rod. (Part No: 9N6211E-PAIR)
$5.75

Rod Bearing Pair, .020 - For tractor models 8N, 9N, 2N. 1 Pair for one Rod. (Part No: 9N6211G-PAIR)
$13.05

Rod Bearing Pair, .030 - For tractor models 8N, 9N, 2N. 1 Pair for one Rod. (Part No: 9N6211-030)
$7.35

Rod Bearing Pair, .040 - For tractor models 8N, 9N, 2N. 1 Pair for one Rod. (Part No: 9N6211-040-PAIR)
$6.53

Rod Bearing Pair, .060 - Individual Rod Bearing 1 pr. For model 8N, 9N, 2N. 4 Required per engine. (Part No: CB-200P-060)
$9.00

Rod Bearing Pair, Standard - With journal size of 2.095 inches. For tractor models 8N, 9N, 2N. 1 Pair for one Rod. (Part No: 9N6211A-PAIR)
$10.26

Rod Bearing Set, .010 - .010 inch Connecting Rod Bearing Kit. 1 kit used per engine. Contains 4 pair of 9N6211E. For 8N, 9N, 2N. (Part No: CRK9N6211E-010)
$33.71

Rod Bearing Set, .020 - .020 inch Connecting Rod Bearing Kit. 1 kit used per engine. Contains 4 pair of 9N6211G. For 8N, 9N, 2N. (Part No: CRK9N6211G-020)
$38.67

Rod Bearing Set, .030 - .030 inch Connecting Rod Bearing Kit. 1 kit used per engine. Contains 4 pair of 9N6211-030. For 8N, 9N, 2N. (Part No: CRK9N6211-030)
$38.67

Rod Bearing Set, .040 - .040 inch Connecting Rod Bearing Kit. 1 kit used per engine. Contains 4 pair of 9N6211-040. For 8N, 9N, 2N. (Part No: CRK9N6211-040)
$38.67

Rod Bearing Set, Standard - With Journals measuring 2.095 inches. Connecting Rod Bearing Kit. 1 kit used per engine. Contains 4 pair of 9N6211E. For 8N, 9N, 2N. (Part No: CRK9N6211A-STD)
$41.82

Engine Gaskets
Crankshaft Seal, Front, Pack of 2 - Rope Seal, FRONT. Upper and lower is the same part. For tractor models 8N, 9N, 2N. Price is for 2 pieces. Order quantity 1 for 1 engine. Replaces 8N6700 and 8N6707. (Part No: 8N6700)
$5.61

Crankshaft Seal, Rear Pair, Pack of 2 - Rope Seal, REAR. Upper and lower is the same part. For tractor models 8N, 9N, 2N. Replaces 8N6701 and 8N6702. (Part No: 8N6701)
$4.89

Crankshaft Seal, Single Piece - Replace your original 2 piece front crankshaft seal with this single piece seal. Used on Ford 9N, 2N and 8N tractors. Replaces 8N6700 and 8N6707 (Part No: 8N6700V)
$1.71

Distributor Breaker Cover Gasket - For tractor models 9N, Early 8N, 2N. (Part No: 9N12276)
$1.25

Exhaust Manifold Gasket, Pack of 2 - Pack of 2 for exhaust manifold on 8N, 9N, 2N. (Part No: 9N9448)
$4.34

Full Gasket Set - Full Engine Overhaul Gasket Set with Metal Head Gasket. Comes WITHOUT front and side timing cover gaskets. For tractor models 8N, 9N, 2N. (Part No: 8N6008M)
$29.22

Governor Housing Mounting Cover Gasket - For tractor models 8N, 9N, 2N. (Part No: 9N6022)
$1.70

Head Gasket - Head Gasket. All soft material except for the fire rings. For tractor models 8N, 9N, 2N. (Part No: 8N6051A)
$9.14

Head Gasket - Head Gasket, all metal. For 8N, 9N, 2N. (Part No: 8N6051B)
$12.23

Oil Pan Gasket Set - For 8N, 9N, 2N; through 1964. 7 Piece Set. Oil Pan Gasket Set with upper and lower crankshaft rope seals, left and right oil pan gaskets, and oil pan drain plug gasket. (Part No: 9N6781)
$10.67

Timing Gear Front Cover Gasket - For tractor models 9N, 2N, (8N prior to serial number 263844). (Part No: 9N6020A)
$1.66

Timing Gear Side Cover Gasket - For tractor models 9N, 8N, 2N. Replaces original part number 8N6018 (Part No: 8N6018)
$1.02

Upper Gasket Set - For tractor models 8N, 9N, 2N. Upper Gasket Set with Metal Head Gasket. Set includes: cylinder head gasket, (2) valve cover side plate gaskets, (8) valve guide seals, (2) manifold gaskets, (1) governor gasket. Replaces: 8BA6571, 9N6022, 9N9448, 7HA6521, 8N6051A. (Part No: VG8NM)
$19.44

Valve Cover Gasket - For tractor models 8N, 9N, 2N. (Part No: 7HA6521)
$2.39

Engine Rebuild Kits
Basic In Frame Overhaul Kit, 120 Gas - For 120 CID 4 cylinder gas 3-3/16 inch standard bore. Basic In Frame Kit contains, thick wall .090 inch sleeves, 3 ring pistons, rings, pin and retainers, valve grind gasket kit, pan gasket kit. Bearings are available, must be ordered separately. For tractor models 8N, 9N, 2N. (Part No: BIFF106A)
$191.46

Basic In Frame Overhaul Kit, 120 Gas - 120 CID 4 cylinder gas 3-3/16 inch standard bore. Kit contains thin wall .040 inch sleeve, 3 ring pistons, rings, pin and retainers, valve grind gasket kit, pan gasket kit. Kit does not include bearings. For tractor models 8N, 9N, 2N. (Part No: BIFF103A)
$197.44

Basic In Frame Overhaul Kit, 120 Gas - 120 CID 4 cylinder gas 3-3/16 inch standard bore. Basic In Frame Kit contains, thin wall .040 inch sleeves 4 ring pistons, rings, pin and retainers, valve grind gasket kit, pan gasket kit. For tractor models 8N, 9N, 2N. (Part No: BIFF102A)
$243.97

Basic In Frame Overhaul Kit, 120 Gas - 120 CID 4 cylinder gas 3-3/16 inch standard bore. Basic Engine Kit contains, thick wall .090 inch sleeves, 4 ring pistons, rings, pin and retainers, valve grind gasket kit, pan gasket kit. Bearings are available, must be ordered separately. For tractor models 8N, 9N, 2N. (Part No: BIFF105A)
$216.38

Basic Overhaul Kit, 120 Gas, 3-ring pistons, .040 Sleeves - 120 CID 4 cylinder gas 3-3/16 inch standard bore. Basic Engine Kit contains, thin wall .040 inch sleeves, 3 ring pistons, rings, pin and retainers, pin bushings, complete gasket kit. Bearings NOT included and must be ordered separately. For tractor models 8N, 9N, 2N. (Part No: BEKF103A-LCB)
$207.03

Basic Overhaul Kit, 120 Gas, 3-ring pistons, .090 Sleeves - 120 CID 4 cylinder gas 3-3/16 inch standard bore. Basic Engine Kit contains, thick wall .090 inch sleeves, 3 ring pistons, rings, pin and retainers, pin bushings, complete gasket kit. Bearings NOT included and must be ordered separately. For tractor models 8N, 9N, 2N. (Part No: BEKF106A-LCB)
$200.06

Basic Overhaul Kit, 120 Gas, 4-Ring Pistons, .090 Sleeves - 120 CID 4 cylinder gas 3-3/16 inch standard bore. Basic Engine Kit contains, thick wall .090 inch sleeves, 4 ring pistons, rings, pins and retainers, pin bushings, complete gasket kit. Bearings NOT included and must be ordered separately. For tractor models 8N, 9N, 2N. (Part No: BEKF105A-LCB)
$242.95

Basic Overhaul Kit, 120 Gas, 4-ring Pistons, .040 Sleeves - 120 CID 4 cylinder gas 3-3/16 inch standard bore. Basic Engine Kit contains, thin wall .040 inch sleeves, 4 ring pistons, rings, pins and retainers, pin bushings, complete gasket kit. Bearings NOT included and must be ordered separately. For 8N, 9N, 2N. (Part No: BEKF102A-LCB)
$253.24

Engine Overhaul Kit, 120 Gas - 120 CID 4 cylinder gas 3-3/16 inch standard bore. Engine Overhaul Kit contains, thin wall .040 inch sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit, intake and exhaust valves, valve springs and retainers, guides and retainers, valve keys. For tractor models 8N, 9N, 2N. NOTE: If you have rotating valves you will also need 4 x 8N6505C exhaust valves and 4 x 8N6534B Valve Rotor Assembly. These are sold separately. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our Engine Bearings category. (Part No: EOK103-LCB)
$351.07

Engine Overhaul Kit, 120 Gas - 120 CID 4 cylinder gas 3-3/16 inch standard bore. Engine Overhaul Kit contains, thick wall .090 inch sleeves, 3 ring pistons, rings, pin and retainers, pin bushings, complete gasket set, intake and exhaust valves, valve springs and retainers, guides and retainers, valve keys. For 8N, 9N, 2N. NOTE: Please indicate in comments if you have rotating valves, (4) 8N6505C and (4) 8N6534B will be added to the order for an additional special price of $105.00. This additional charge will be added to your order. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our Engine Bearings category. (Part No: EOK106-LCB)
$355.35

Overhaul Kit, Comprehensive - GUIDE - TO DETERMINE WHICH OF THE BELOW KITS YOU WILL NEED, YOU NEED TO KNOW THE FOLLOWING: (1) If your pistons have 3 or 4 rings per piston. (2) If your piston sleeve thickness is .040 or .090 inches. (3) If your oil pump gear is 3/4 or 9/16 inches wide. (4) If you have rotating or non-rotating exhaust valves - If your keepers or keys on the exhaust and intake valves are the same, you DO NOT have rotating valves. If your keepers or keys on the exhaust and intake valves are the different, you DO have rotating valves. Engine bearings can be ordered from our ENGINE BEARINGS category. NOTE

Overhaul Kit, Comprehensive, 120 Gas - 3 RING PISTONS, .090 Inch SLEEVES, 3/4 OIL PUMP GEAR WIDTH. Complete Engine Kit. Contains, thick wall .090 inch sleeves, 3 ring pistons, rings, pins and retainers, pin bushings, complete gasket set, timing gear, intake and exhaust valves, springs, spring retainers, guides, retainers and seals, valve keys, upper and lower radiator hose, air cleaner hose, oil pump kit, fan belt, points and condenser, spark plugs, oil filter, basic carb kit. For tractor models 8N, 9N, 2N. NOTE: If you have rotating valves you will also need 4 x 8N6505C exhaust valves and 4 x 8N6534B Valve Rotor Assembly. These are sold separately. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our Engine Bearings category. (Part No: 3-8H-LCB)
$443.12

Overhaul Kit, Comprehensive, 120 Gas - 120 CID 4 cylinder gas 3-3/16 inch standard bore, 3/4 inch oil pump gear width. Complete Engine Kit contains, thin wall .040 inch sleeves, 3 ring pistons, rings, pins and retainers, pin bushings, complete gasket kit, timing gear, intake and exhaust valves, springs, spring retainers, guides, retainers and seals, valve keys, upper and lower radiator hose, air cleaner hose, oil pump kit, fan belt, points and condenser, spark plugs, oil filter, basic carb kit. For tractor models 8N, 9N, 2N. NOTE: If you have rotating valves you will also need 4 x 8N6505C exhaust valves and 4 x 8N6534B Valve Rotor Assembly. These are sold separately. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our Engine Bearings category. (Part No: 3-8T-LCB)
$455.40

Overhaul Kit, Comprehensive, 120 Gas - 120 CID 4 cylinder gas 3-3/16 inch standard bore, 9/16 inch oil pump gear width. Complete Engine Kit contains, thick wall .090 inch sleeves, 3 ring pistons, rings, pins and retainers, pin bushings, complete gasket kit, timing gear, intake and exhaust valves, springs, spring retainers, guides, retainers and seals, valve keys, upper and lower radiator hose, air cleaner hose, oil pump kit, fan belt, points and condenser, spark plugs, oil filter, basic carb kit. For, 8N, 9N, 2N. NOTE: If you have rotating valves you will also need 4 x 8N6505C exhaust valves and 4 x 8N6534B Valve Rotor Assembly. These are sold separately. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our Engine Bearings category. (Part No: 3-9H-LCB)
$412.01

Overhaul Kit, Comprehensive, 120 Gas - 120 CID 4 cylinder gas 3-3/16 inch standard bore, 9/16 inch gear width. Complete Engine Kit contains, thin wall .040 inch sleeves, 4 ring pistons, rings, pins and retainers, pin bushings, complete gasket kit, timing gear, intake and exhaust valves, springs, spring retainers, guides, guide retainers and seals, valve keys, upper and lower radiator hose, air cleaner hose, oil pump kit, fan belt, point and condenser, spark plugs, oil filter, basic carburetor kit. For 8N, 9N, 2N. NOTE: If you have rotating valves you will also need 4 x 8N6505C exhaust valves and 4 x 8N6534B Valve Rotor Assembly. These are sold separately. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our Engine Bearings category. (Part No: 4-9T-LCB)
$454.02

Overhaul Kit, Comprehensive, 120 Gas, 4-ring Pistons, .090 Sleeves - 4 RING PISTONS, .090 Inch SLEEVES, 9/16 Inch OIL PUMP GEAR WIDTH. Complete Engine Kit contains, thick wall .090 inch sleeves, 4 ring pistons, rings, pins and retainers, pin bushings, complete gasket kit, intake and exhaust valves, springs, spring retainers, guides, retainers and seals, valve keys, upper and lower radiator hose, air cleaner hose, oil pump kit, timing gear, fan belt, points and condenser, spark plugs, oil filter, basic carb kit. For, 8N, 9N, 2N. NOTE: If you have rotating valves you will also need 4 x 8N6505C exhaust valves and 4 x 8N6534B Valve Rotor Assembly. These are sold separately. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our Engine Bearings category. (Part No: 4-9H-LCB)
$480.86

Valve Overhaul Kit - For servicing one engine when valve replacement is necessary. For 8N, 9N, 2N with solid guides, free-rotating exhaust valves. Kit contains intake valves, exhaust valves, valve springs and keys, solid type valve guides and rotating valve kit. (Part No: VOKF928NFR)
$118.06

Valve Overhaul Kit - Fits 9N, 2N and 8N that use solid valve guides and have NON-rotating exhaust valves. Includes intake and exhaust valves, springs, keys, and guides. (Part No: VOKF928N)
$99.36

Engine Parts
Camshaft Gear - This Press on type Camshaft Gear is used on Ford Tractors 1939-1942. THIS IS A FIBER GEAR. Replaces 48-6256-A, 486256A. (Part No: 48-6256-A)
$27.96

Connecting Rod Nut - This is a Castle Style Nut for the Rod Cap on Ford tractors, 1939 to 1964. Replaces C9AZ6212B, 7HA6212, 7HA-6212. Eight used per tractor. Priced each. For models 9N, 8N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 4000 and 2000. (Part No: 7HA-6212)
$1.58

Connecting Rod, Reconditioned - Used on 120 cubic inch 4 cylinder engines from 1939 to 1952, this recondition connecting rod has new bushing and hardware. Used on Ford 9N, 2N and 8N tractors. Replaces rods with casting number 9N6200 and 9N6200B (Part No: 9N6200B)
$77.34

Crankshaft - New kit with bearings. For tractor models 8N, 9N, 2N with Standard Rod and Main Bearings. (Part No: 9N6303ACK)
$535.11

Crankshaft Cranking Rachet - The ratchet nut fits into the nose of the crankshaft. The hand crank fits into the end of the ratchet to turn the engine over. Replaces original part number 2N6319A1 (Part No: 2N6319A1)
$13.61

Crankshaft Pulley - This Crankshaft Pulley for models 8N, 9N, and 2N. Used with attaching a screw type hub for a front mounted hydraulic pump. Crankshaft mounting is 1.63 inch outside diameter and 1.18 inch inside diameter and has four 1/4 inch -20 threaded holes. Can be used as a regular crankshaft pulley without attaching a hub for a front mounted hydraulic pump. Replaces 2N6312. Used with part numbers 192161 and 194354. (Part No: 192160)
$44.75

Cylinder Head Bolt - These bolts are 7/16 in diameter and 3 inches long. For 8N, 9N, 2N. 18 are used per tractor. Replaces 8N6065A (Part No: F8N6065A)
$6.62

Cylinder Head Studs - Studs are 7/16 in diameter and 3 inches long (threads: coarse 7/16-14 fine 7/16-20). For 8N, 9N, 2N. 18 are used per tractor. Priced each. (Part No: 8N6065A)
$5.46

Cylinder Head, New - For 8N, 9N, 2N. All GAS 1939-1952. Cylinder Head. Replaces 8N6050, 8N6050A, 9N6050 (Part No: 8N6050A)
$209.49

Distributors and Distributor Parts - These are located in the Electrical System parts section. NOTE

Flywheel Bolt Kit - From 1939 through 1964, these bolts were used by Ford to attach the Flywheel to the Crankshaft. These are exactly like the originals. (Part No: 350645S)
$25.71

Governor - Complete Governor Assembly with gasket, 3 arm, for 9N and 2N (1939-1947), without proofmeter drive. (Part No: 9N18200C)
$196.59

Governor Ball, Pack of 4 - Fits 9N, 2N and 8N. 5/8 inch diameter ball. 4 used per tractor. Replaces 358081S. (Part No: 358081S)
$3.66

Governor Centrifugal Assembly - Governor Internal Centrifugal Assembly. Fits 9N18200C or 8N18204B above, for 8N, 9N, 2N (1939 thru 1952). If your tractor has the proofmeter you will need to also purchase a roll pin at a local hardware store (0.314" O.D. x 0.750" Long) to drive the cable. (Part No: 9N8N18179CA)
$146.00

Governor Compensating Spring - 3.7 inch length. For tractor models 9N, 2N. (Part No: 9N9827)
$3.95

Governor Driveshaft Ball Stop Shim, Pack of 10 - This Governor Driveshaft Ball Stop Shim is 0.010 inches thick. It is used on 9N, 2N and 8N Governors. Replaces 9N18241. (Part No: 9N18241)
$6.15

Governor Dust Seal - Replacement Governor Dust Seal. For tractor models 8N, 9N, 2N. (Part No: 9N18183)
$7.66

Governor Housing - Governor Housing includes needle bearing, lip-type seal, bushing, and proofmeter drive cap with seal and nut. For 8N, 9N, 2N tractors built 1939 thru 1952. (Part No: 8N18085)
$156.27

Governor Lever Spring - This Governor Lever Spring will fit tractor models 9N, 2N, 8N. (Part No: 9N18196)
$3.95

Governor Lower Race Assembly Bearing - For tractor models 8N, 9N, 2N. (Part No: 9N18186B)
$80.61

Governor Needle Bearing - For tractor models 8N, 9N, 2N. (Part No: 9N18182)
$9.06

Governor Repair Kit, Basic - For 8N, 9N, 2N. Kit contains gasket, lower race assembly, ball bearing, C-clip, 3 shims and 4 governor balls (5/8 inch). (Part No: BOK12502)
$94.53

Governor Repair Kit, Complete - For 9N, 2N and 8N. Kit contains lower race assembly, shaft assembly (with or without proofmeter), upper face assembly, ball bearing assembly, shim, drive shaft ball stop, governor balls (5/8 inch), bushings, mounting gasket, dust seal, C-clip. (Part No: CAPN12502A)
$169.12

Governor Shaft - Shaft Assembly, with or without proofmeter. For 8N, 9N, 2N. (Part No: 9N8N18187A)
$51.63

Governor Thrust Bearing - This Governor Thrust Bearing is used on Ford 9N, 2N and 8N tractors, 1939-1952. It replaces original part number 9N18192 (Part No: 9N18192)
$7.38

Governor Upper Race Assembly - Upper Race Assembly. For 8N, 9N, 2N. Replaces original part number 9N18188B. (Part No: 9N18188B)
$41.43

Hand Starting Crank - 8N, 9N, 2N Hand Starting Crank WITHOUT Spinner. Replaces 9N17040 and 2N178040A (Part No: 351010R31)
$34.50

Piston Rings - These are located in the ENGINE RINGS category. NOTE

Pistons and Sleeves - Pistons and Sleeves are located in the "Pistons and Sleeves category" Use your "BACK" key and select this category. (Part No: Various)
$107.00

Timing Gear, Camshaft - This Bolt-on type Aluminum Camshafts fits 8N, 9N, 2N thru 1952. (Part No: 7RA6256)
$73.83

Timing Gear, Crankshaft - This Crankshaft Timing Gear replaces original part numbers: 48-6306, 48-6306A, 486306A . For tractor models 8N, 9N, 2N. 22 teeth. (Part No: 486306A)
$44.49

Valve Guide - Single Valve Guide. For 8N, 9N, 2N. (Part No: 8BA6510B)
$6.08

Valve Guide Retainer, Pack of 8 - 120 CID 4 cylinder gas engines. For 8N, 9N, 2N. 8 per engine.``Pack of 8 (Part No: 40-6512)
$10.20

Valve Guide, Split - Set of 16 halves. This is the original Split, two piece guide used with the mushroomed top valves, Ford 9N and 2N 1939-1947. Also used on Ford Cars and Trucks 1932-1948. Replace 40-6510-S, 406510. (Part No: 40-6510-S)
$99.95

Valve Key, Intake and Exhaust, Pack of 8 - 120 CID 4 Cylinder Gas Engines. NOT for Free Rotating Exhaust Valves. Sixteen required per engine (2 packages of 8). Used in 120, 134 and 172 CID 4 Cylinder Gas Engines. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929, 10A6440, 206880, RP42026D, VT3234. (Part No: 7HA6518)
$2.40

Valve Key, Rotating Exhaust, Pack of 8 - 120 CID 4 cylinder gas engine. Valve Key for FREE ROTATING Exhaust Valves. For tractor models 8N, 9N, 2N. (Part No: EAM6518A)
$10.44

Valve Rotator Assembly - Valve Rotator Kit for free-type valve 8N6505C. 1 used per valve. Kit contains 1 valve spring retainer (available in kit only), 1 rotator cap, 2 valve locks. For 8N, 9N, 2N with rotating valves. 4 used per engine. (Part No: 8N6534B)
$13.50

Valve Seat, Exhaust - These Valve Seats are the Nickel Series which are made for all new fuel blends. For tractor models 8N, 9N, 2N. 1.348 inch outside diameter. (Part No: 218-7405)
$6.75

Valve Seat, Intake - For tractor models 8N, 9N, 2N. (Part No: 218-7535)
$4.50

Valve Service Kit - Contains: 8 valve springs, 8 valve guides-solid type and 16 valve locks. For 8N, 9N, 2N. (Part No: VSKF928N)
$53.85

Valve Spring Retainer - These Valve Spring Retainers are for intake and exhaust for the 120 cubic inch, 4 cylinder gas engines. NOT for free type exhaust valve. Retainer for free type valve not furnished separately, order rotator kit 8N6534B. For 8N, 9N, 2N. Priced each. If you order 1, you will receive 1 retainer. Replace 8RT6514B 8 per engine. (Part No: 8BA6514)
$2.10

Valve Spring with 1 Piece Guides - Sold individually, this valve spring is for the 120 CID 4 cylinder gas engine in the 9N, 2N and 8N. For use with Solid Valve Guides. (Part No: 8N6513)
$2.42

Valve Spring with Split Guides - Sold individually, these valve springs are for120 CID 4 cylinder gas engine. Valve spring for use with split guides. For 8N, 9N, 2N. (Part No: 2NC6513)
$1.50

Valve Stem Seal, Pack of 8 - Valve Stem Seal for valve guide in 120 CID 4 cylinder gas engine. For 8N, 9N, 2N. Priced each. 4 used per tractor. (Part No: 8BA6571)
$4.92

Valve Tappet - ADJUSTABLE Tappet. Fits 8N, 9N, 2N. Note: Quantity 8 used in engine. Priced each. If you order 1, you will receive 1 tappet. (Part No: A0NN6500A)
$16.31

Valve Tappet Wrench Set - For 8N, 9N, 2N. Valve Tappet Wrench (Set of 2). For adjustable tappets. Wrenches to adjust 91A tappets. Replaces 8WR1770, 8WR1770, T-6500-PR. Also used on Ford F-Series Trucks 1948-1953 and Ford Cars 1949-1951. (Part No: 8WR1770)
$9.95

Valve, Exhaust - Exhaust Valve using Solid Guide. Uses 7HA6518 lock. For tractor models 8N, 9N, 2N. (Part No: 8N6505A)
$10.85

Valve, Exhaust, Free-rotating - Exhaust Valve for free-rotating type. Uses solid guide and EAM6518A lock. For tractor models 8N, 9N, 2N. (Part No: 8N6505C)
$13.20

Valve, Intake - This Intake Valve uses the one piece guide. Uses valve lock part number 7HA6518. For 8N, 9N, 2N. (Part No: 8BA6507A)
$9.92

Engine Pistons and Sleeves
Cylinder Sleeve, .005 oversize .090 - Oversize replacement for .090 thickness sleeves for larger cylinder block holes. Outside sleeve diameter is 3.373, .005 larger than original. Sleeve is .0925 thickness to retain original piston bore of 3 3/16 inches. This sleeve has a small lip at the top, if your your block does not have a lip recess these will not work. For 8N, 9N, 2N. (Part No: S1137-2)
$59.81

Cylinder Sleeve, .090 - This Cylinder Sleeve is for tractor models 8N, 9N, 2N. This Sleeve is .090 inch heavy-wall for 3 ring and 4 ring pistons. Measures 3.368 inches outside diameter, 3.1875 inside diameter. Priced as each. (Part No: 8N6055B)
$25.61

Piston - .0825 inch Oversize Piston for the standard 3 3/16 bore. For 8N, 9N, 2N. (Part No: P1003-0)
$32.37

Piston Pin Bushing - For tractor models 8N, 9N, 2N. This Piston Pin Bushing is .735 inch inside diameter. Price shown is EACH, minimum order quantity is 4. (Part No: 21A6207A3)
$3.95

Piston and Sleeve Kit, 3 Ring, .090 Sleeves - Kit, (4) sleeves, pistons, chrome rings, piston pins and pin retainers. For 8N, 9N, 2N (Part No: APN6055A)
$205.62

Piston and Sleeve Set - Super Piston Set. For 8N, 9N, 2N Increased horsepower up to 5% by use of .0825 wall sleeve, same outside diameter as heavy wall sleeve. Can be used in any application where .090 wall thickness sleeves are used. .050 wall sleeves, .0825 oversize 4-ring pistons. Comes with sleeves, pistons, rings and retainers. (Part No: PK11)
$230.40

Piston, 3 Ring - For tractor models 8N, 9N, 2N. This is a Single 3 Ring Piston with standard bore can be used with .040 thin wall sleeves or .090 thick wall sleeves, and a 3/16 oil ring. (Part No: 8N6108B)
$24.17

Piston, 4 Ring, With 3/16 Oil Ring - For tractor models 8N, 9N, 2N. This is a Single Piston with a standard 3 3/16 inch bore, 3/16 oil ring. Piston comes with pin and lock. This price is for STANDARD. OVERSIZE ARE AVAILABLE. Please specify size of std, .020, .030, .040, or .0825 in comments box when ordering. (Part No: P1003)
$35.78

Piston, 4 Ring, With 5/32 Oil Ring Groove - For tractor models 8N, 9N, 2N. This is a Single Piston with 5/32 oil ring groove, standard bore. Used with 2N6149G1 or 2N6149-4RS ring sets, not included. (Part No: 2N61084RS)
$37.11

Sleeve & Piston Kit - Sleeve and Piston Kit for 1 cylinder for 3 Ring Piston and .040 sleeve. Contains sleeve, piston, piston rings, piston pin and pin retainer. For 8N, 9N, 2N. (Part No: SAT3A)
$50.75

Sleeve & Piston Kit - Sleeve and Piston Kit for 1 piston with a 3 Ring Piston and .090 sleeve. Contains sleeve, piston, piston rings, piston pin and pin retainer. For 8N, 9N, 2N. (Part No: SAT6A)
$51.18

Sleeve & Piston Kit - Sleeve and Piston Kit for 1 cylinder with a 4 Ring Piston and .090 sleeve. Contains sleeve, piston, piston rings, piston pin and pin retainer. For 8N, 9N, 2N. (Part No: SAT5A)
$51.49

Engine Rings
3 Ring Piston Ring Set with Chrome Top Ring - For tractor models 8N, 9N, 2N. 1939-1952 4 cylinder gas Standard Bore, CHROME Top Ring, 2@3/32 comp, 1@3/16 oil. Complete set for one engine. (Part No: 8N6149G1)
$35.63

Piston Ring Set, 3 Ring - For tractor models 8N, 9N, 2N. 1939-1952 4 cylinder gas Standard 3 Ring, CHROME top ring, 5/32 steel rail oil. Complete set for one engine. (Part No: 9N6149A)
$73.83

Piston Ring Set, 3 Ring, Plain - For 8N, 9N, 2N. 1939 to 1952 4 cylinder gas. Standard, plain top ring, 3/16 inch steel rail oil. Complete set for one engine. (Part No: 8N6149A5)
$33.95

Piston Ring Set, 3 ring - For tractor models 8N, 9N, 2N. Ring set for 3 ring piston with standard bore. This is a SINGLE piston ring set with 3/16 oil ring. (Part No: RST6G1)
$10.08

Piston Ring Set, 4 Ring - Chrome .040 inch oversize, 3/16 inch steel rail oil. For 8N, 9N, 2N. Complete for 1 engine, 4 cylinders. (Part No: PR1003-040)
$62.70

Piston Ring Set, 4 Ring - For tractor models 8N, 9N, 2N. 1939-1952 4 cylinder gas standard bore, cast iron rings, 2@3/32 comp, 2@5/32 oil. COMPLETE SET FOR 1 ENGINE. (Part No: 2N6149-4RS)
$69.69

Piston Ring Set, 4 Ring - Chrome. For Ford 8N, 9N, 2N tractors (1939-1952 with 4-cylinder flat head engines) For 4-ring center pin pistons. Std 3-3/16 inch bore, chrome top ring, 2 at 3/32 inch & 2 at 5/32 inch. COMPLETE SET FOR 1 ENGINE. (Part No: 2N6149G1)
$70.61

Piston Ring Set, 4 Ring - For tractor models 8N, 9N, 2N tractors (1939-1952 with 4-cylinder flat head engines) For 4-ring pistons. Std 3-3/16 inch bore, 2 at 3/32 inch plain top rings & 2 at 3/16 inch oil rings. Also available in .020, .030 and .040 oversize with chrome top. Complete for 1 engine, 4 cylinders. (Part No: PR1003)
$74.45

Exhaust System
Bracket, Muffler - Bracket, Rear Muffler. EXACT reproduction of ORIGINAL rear muffler bracket. For tractors: 8N, 9N, 2N {1939-1952}. (Part No: 9N5260)
$14.95

Exhaust Manifold Gasket, Pack of 2 - Pack of 2 for exhaust manifold on 8N, 9N, 2N. (Part No: 9N9448)
$4.34

Extension Pipe - Vertical Two-Piece Exhaust Pipe with clamp, less muffler. For use without muffler, straight through design for maximum exhaust flow-more power. Vertical height remains the same as assemblies with muffler. Inlet 1-1/2 inch inside diameter. Outlet 1-1/2 inch outside diameter. For 8N, 9N, 2N. (Part No: M104)
$32.87

Manifold - High Quality Intake and Exhaust Manifold with 2 Manifold Gaskets. For 8N, 9N, 2N. Replaces: 9N9425. This part may not be painted as shown. Cosmetic surface rust is common on bare castings. (Part No: 9N9425WG)
$59.51

Manifold Nut & Washer Kit - Brass Nut and Washer Kit (Kit contains 4 nuts and 4 Washers). For intake and exhaust manifold. For tractors: 8N, 9N, 2N {1939-1952}. Replaces: Nut (7/16 - 20): 33816S, 7/16 LOCK WASHER: 34808S. (Part No: 33816-KIT)
$4.95

Muffler - Heavy-Duty Horizontal Muffler only. Inlet 1-1/2 inch inside diameter, outlet 1-1/2 inch outside diameter, body length 23 inches. For 8N, 9N, 2N. Does not come with hardware. (Part No: M1002)
$26.75

Muffler - Vertical Two-Piece, Muffler and Pipe with clamp. Custom design ready for assembly. Pipe inlet flared, outlet 1-1/2 inch outside diameter. For 8N, 9N, 2N (Part No: M102)
$41.33

Muffler Clamp - Flanged Muffler Clamp. For tractor models 8N, 9N, 2N. Note that there is a large bevel and a small bevel on the inside edge of this clamp. The large side goes toward the manifold. If you install the clamp and the pipe is loose, you have it backwards. If you over-tighten, it will break. Replaces CAPN5200A (Part No: FP185)
$5.69

Muffler and Pipe Assembly - Horizontal Muffler and Pipe, one piece welded assembly. For 8N, 9N, 2N with under-hood exhaust. WELDED 1 PIECE ASSEMBLY; MUFFLER AND EXHAUST PIPE INLET LENGTH 2 1/2 inches, INLET INSIDE DIAMETER 1 1/2 inches, SHELL LENGTH 23 InchES, SHELL DIAMETER 3-1/4 InchES, OUTLET LENGTH 8 1/2 InchES, OUTLET OUTSIDE DIAMETER 1 1/2 InchES. OVERALL LENGTH 53 InchES, EXHAUST PIPE: FLARED INLET VERTICAL LENGTH 15 1/2 InchES, HORIZONTAL LENGTH 22 InchES, OUTLET OUTSIDE DIAMETER 1 1/2 InchES. (Part No: 8N5230)
$30.36

Muffler and Pipe Assembly - Vertical one-piece Muffler and Pipe Assembly, custom design. For 8N, 9N, 2N. Pipe inlet flared, outlet 1-1/2 inch outside diameter. (Part No: M200)
$44.16

Muffler and Pipe Assembly OEM - Just like the original, this Muffler Assembly includes the FoMoCo Script and original part number. Used on Ford 9N, 2N and 8N tractors, 1939-1952. Replaces 8N5230. **THERE IS AN ADDIONAL $50 SHIPPING CHARGE DUE TO SIZE/WEIGHT ON THIS ITEM** This additional shipping charge will be added to your order. (Part No: 8N5230S)
$77.58

Fuel System / Air Intake
Air Cleaner Assembly - This air cleaner assembly fits 9N, 8N. Includes Air cleaner, & cup with mesh. Will not accurately replace the style with the top wire mesh without modification. This Assembly has a solid cap with hole which can be cut off and replaced with a similar screen and lid or left as is, depending on the needs of the user. This assembly may come painted PRIMER or painted red depending on current supply. (Part No: 8N9600B)
$93.34

Air Cleaner Cup Gasket - For air cleaners with thumb screw clamp (15-1/4 inches long). Tractors: 8N, 9N, 2N, (1939-1952). (Part No: 9N9623A)
$5.49

Air Cleaner Cup Gasket - For air cleaners with toggle clamps on side of air cleaner (14-3/4 inches long). Use with Air Cleaner Cup S.61648 and S.60583. For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 9N9623B)
$3.95

Air Cleaner Cup Set - Includes Air Cleaner Cup, inner cup, clamp. VERIFY MEASUREMENTS. Cup inside diameter is approximately 4.5 inches, cup height is 3 inches. Replaces 311507. (Part No: 696300)
$39.60

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Part No: S.43231)
$10.29

Air Cleaner Hose Clamp - Clamp, air cleaner to carburetor pipe. Tractors: 8N, 9N, 2N, NAA (1939-1954). For 2 inch outside diameter hoses +/- 1/8 inch. (Part No: 9N9653)
$2.50

Air Cleaner Oil Cup - This cup is for Clamp Type Air Cleaners. This cup measures 4 3/4 inches outside diameter at the lip. The height is 3 inches. Please measure before ordering to ensure the proper fit. For models 2N, 9N, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. Replaces: 311507. (Part No: 311507)
$14.25

Air Cleaner Tube - For tractor models 8N, 9N, 2N. Air Cleaner Tube, Air Cleaner to Carburetor. Chromed Steel Construction. Replaces: 9N18215C (Part No: 9N18215C)
$18.74

Air Hose to Carburetor - 1.5 Inches - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900 1939-57 gas tractors. Rubber Air Hose is 2 3/8 inches long, 1 1/2 inch inside diameter. (Part No: 9N9652)
$1.97

Carburetor Elbow & Strainer - For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600 series, 700 series, 800 series. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$5.13

Carburetor Float, Small Bowl - Small Bowl Carburetor Float for Marvel Schebler carbs (2 3/8 inches at widest point of outside edge of floats) used on 9N, 2N and 8N tractors AND used only on the following engines (year): 134 CID (1953 to 1954) or 172 CID (1955 to 1957) gas engines on tractors: NAA, 501, 601, 700, 701, 800, 801, 900, 901, 2000. (Part No: 9N9550A)
$7.62

Carburetor Gasket Set - For tractor models 8N, 9N, NAA, Golden Jubilee, Jubilee, 600, 800, 2N, 620, 630, 640, 650, 660, 700, 740, 820, 840, 850, 860, 900, 950, 960, NAB with the following Marvel Schebler carburetors: TSX101, TSX126, TSX133, TSX137, TSX144, TSX151, TSX161, TSX171, TSX179, TSX197, TSX211, TSX241A, TSX241B, TSX241C, TSX246, TSX258, TSX290, TSX297, TSX301, TSX33, TSX341, TSX37, TSX38, TSX407, TSX420, TSX423, TSX44, TSX447, TSX453, TSX481, TSX55, TSX577, TSX580, TSX593, TSX69, TSX748, TSX76, TSX765, TSX771, TSX787, TSX79, TSX80, TSX818, TSX827, TSX83, TSX94, TSX976, TSXU829, TSXU832, TSX198, TSX241, TSX241A, TSX241B, TSX241C, TSX305, TSX319, TSX420, TSX428, TSX500, TSX551, TSX577, TSX580, TSX593, TSX692, TSX706, TSX771, TSX976, TSXU834 (Part No: 9N9502)
$2.28

Carburetor Idle Jet - Used on original Marvel Schebler carburetors 1939-1950. Ford 9N, 2N and (8N through serial numbers 250596 with the original carburetor). (Part No: 9N9596)
$2.16

Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 12566B, 13876, 12522, 12522B, 13878, 13877 (Part No: BK44V)
$26.25

Carburetor Kit, Basic - For TSX33, TSX241A, TSX241B and TSX241C carburetors on 2N, 8N and 9N tractors. Contains float valve, float lever pin, and gaskets for minor carburetor overhaul. (Part No: BK45V)
$11.00

Carburetor Kit, Complete - For tractor models from 1939 to 1952, carburetor part #: Marvel-Schebler TSX33, Ford 9N9510A. Kit contains all parts necessary for major carburetor overhaul, including a Viton float valve. For 8N, 9N, 2N. Does NOT include float. (Part No: C545V)
$33.03

Carburetor Kit, Complete - For tractor models from 1939 to 1952, carburetor part #: Marvel-Schebler TSX241A, TSX241B, & TSX241C, Ford 8N9510C. Kit contains parts necessary for major carburetor overhaul, including a Viton float valve. For 8N, 9N, 2N. Does Not include Float. (Part No: C546V)
$27.44

Carburetor Kit, Comprehensive - For Marvel-Schebler carburetors: TSX33, TSX241A, TSX241B, TSX241C, TSX420 Ford 9N, 2N, 8N. Contains all the parts shown. (Part No: R7848)
$54.52

Carburetor Throttle Shaft & Lever - For Marvel Schebler carburetor on 8N, 9N, 2N. (Part No: 9N9581A)
$6.47

Carburetor Venturi - Venturi for original Marvel Carburetors. For tractor models 8N, 9N, 2N. Carb Mfg #s - : TSX101, TSX126, TSX133, TSX137, TSX144, TSX151, TSX155, TSX161, TSX171, TSX179, TSX197, TSX211, TSX241A, TSX241B, TSX241C, TSX246, TSX258, TSX290, TSX297, TSX301, TSX33, TSX341, TSX37, TSX38, TSX407, TSX420, TSX423, TSX44, TSX447, TSX453, TSX481, TSX516, TSX55, TSX69, TSX732, TSX748, TSX76, TSX787, TSX79, TSX80, TSX818, TSX827, TSX83, TSX94, TSXU829, TSXU832 (Part No: C5NN9586B)
$11.43

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 8N, 9N, 2N, 1939-1952. New Zenith carb replaces TSX33, TSX241B, TSX241A, TSX241C and OEM# 8N9510C. Center to center on the 2 mounting bolts is 2 1/4 inches. Made in USA, 1 year warranty. (Part No: 13876)
$361.56

Carburetor, New - For 8N, 9N, 2N, ALL 1939-1952 - Original Marvel-Schebler design replaces TSX33, TSX341B, TSX431C. (Part No: 8N9510C)
$104.87

Carburetor, Rebuilt - This rebuilt Zenith carburetor is a direct replacement for OEM numbers matching: TSX33, TSX241B, TSX241A, TSX241C, 8N9510C. For the following tractor models: 8N, 9N, 2N, 1939-1952. Center to Center on the mounting bolts is 2 1/4 inches. Add $50.00 core charge to price (will be added after order is placed when ordering online) - you will receive instructions for returning your core for a refund if you have one available. (Part No: 13876R)
$157.71

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX33, TSX241B, TSX241A, 8N9510C. For the following tractor models: 8N, 9N, 2N. Center-to-Center on the mounting bolts is 2 1/4 inches. Add $50.00 core charge to price (will be added after order is placed when ordering online) - you will receive instructions for returning your core for a refund if you have one available. (Part No: 1302-CARB)
$182.60

Choke Control Rod Assembly - Pre-bent Choke Control Rod is 29 1/2 inches long. Does NOT come with knob. For tractors: 8N, 9N, 2N (1939-1952). See part number 9N9815 for Throttle to Governor Rod. (Part No: 9N9700)
$19.95

Choke Fly Assembly - Choke Fly Assembly 1-5/16 inch diameter. For 2N, 600, 700, 8N, 9N, NAA, Jubilee. (Part No: 9N9549)
$23.78

Choke Knob - For Ford Gas Tractors 1939-1964. Fits models: NAA, Jubilee, 2N, 8N, 9N, 501, 600, 601, 6411, 700, 701, 801, 900, 901, 2000, 4000. Replaces 9N9703, 9N9703B. (Part No: 9N9703)
$4.65

Choke Lever & Shaft - For tractor models 8N, 9N, 2N. (Part No: 9N9546)
$8.36

Choke Retainer Spring, Pack of 2 - Package of two. Used on original Marvel Schebler TSX33, TSX241A, TSX241B, & TSX241C (Part No: 9N9539)
$3.63

Cyclone Air Cleaner Glass Jar - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. Cyclone Air Cleaner Glass Jar (jar only) screw on type. Exactly like original for tractors that used the "Cyclone" air cleaner only. (Part No: 230056)
$19.95

Cyclone Air Cleaner Glass Jar Seal - Cyclone Air Cleaner Glass Pint Jar Seal (Part No: ACP1248)
$2.50

Cyclone Cup and Spring Assembly - Only for those tractors (1939 to 1964) that used the CYCLONE Air Cleaner Assembly which MAY include: 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Verify the type of air cleaner you have before ordering. (Part No: 230053)
$14.95

Foot Throttle Control - The foot throttle frees the operatorís hands for hydraulic implement control. Especially useful with loaders, blades, dirt buckets, etc. The foot throttle does not affect the operation of your hand throttle. An excellent accessory for all 9Ns and 2Ns. Installs easily using hand tools. No modifications required to your tractor. Kit includes everything necessary, including installation instructions. (Part No: 9N9800)
$139.63

Friction Disk for Hydraulic Control Lever - This Throttle Friction Disc is 3 inches in diameter and has a 1/2 inch center hole. It fits the following tractor models: 9N, 2N, and 8N. Replaces part number C5NN518B. (Part No: C5NN518B)
$1.46

Fuel Cap - Original Style Cap. Fits 8N, 9N, 2N. Fuel Cap for self venting tanks. Cap is non-vented. (Part No: 9N9030Z)
$6.68

Fuel Cap, Non-Vented - This Silver Fuel Cap is for models 8N, 9N, 2N, 600, 620, 630, 640, 650, 660, 800, 820, 840, NAA Fuel Cap. Verify OEM number to ensure correct fit. (Part No: D5NN9030A)
$5.81

Fuel Cap, Vented - 2-5/8 inch outside diameter, silver finish, 1-3/4 inch edge of tang to edge of tang, vented, includes gasket. For tractor models 8N, 9N, 2N, NAA, NAB, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2100, 2110. (Part No: C5NN9030D)
$11.25

Fuel Line - For tractor models 8N, 9N, 2N (1939-1952). This Fuel Line is from Sediment Bowl to Carburetor. Consists of: 1/4 inch steel tubing with two 1/4 inch inverted flair fittings installed. (Part No: 9N9282A)
$18.74

Fuel Line Anti-Rattler - For 8N, 9N, 2N 1939-1952. Fuel Line Anti-Rattler between fuel line and tank. Restoration Quality. (Part No: 9N9121A)
$5.25

Fuel Sediment Bowl Assembly - For models 8N, 9N, 2N, NAA and Jubilee with SHORT BOWL. The fuel bowl assembly has a 3/8 inch NPT male inlet and 1/4 inch female outlet, 1-1/4 inch long bowl. Works with 9N9282A fuel line. Replaces 2N99155B and NAA9155B with short bowl. (Part No: 2NAA9155B)
$15.44

Fuel Sediment Bowl Bail assembly - For tractors 8N, 9N, 2N, NAA, Jubilee. (Part No: 2N9166)
$2.28

Fuel Sediment Bowl Valve Stem - Sediment Bowl Valve Stem with wheel complete. For tractor models 8N, 9N, 2N, NAA. (Part No: APN9194)
$5.33

Fuel Sediment Glass Bowl - 2 inch Glass Bowl. Fits NAA9155B and 2N9155B sediment bowls. Uses gasket NAA9160A, not included. Fits 8N, 9N, 2N, NAA, Jubilee. (Part No: 9N9162)
$3.44

Fuel Sediment Screen and Gasket - Gasket and Screen Set (for 2 inch outside diameter sediment bowl). Ford 8N, 9N, 2N, NAA, 600, 601, 700, 800, 801, 900. (Part No: 2NAA916061)
$1.71

Gasoline Fuel Tank, Steel - Gasoline Fuel Tank (Steel) For 8N, 9N, 2N. 3/8 inch pipe thread outlet. This tank can use the 9N9030Z, D5NN9030A or C5NN9030D caps. (Part No: 9N9002)
$126.06

Main Adjustable Needle - Main Adjusting Needle. For tractor models 8N, 9N, 2N. (Part No: 9N9565C)
$5.30

Main Adjusting Needle Spring - Used with 9N9565C and EAE9565A main adjusting needles on Marvel Schebler Carburetors (Part No: 9N9540C)
$0.50

Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly. Tractors: 8N, 9N, 2N, (1939 to 1952). (Part No: C3NN9564A)
$3.30

Nozzle - Main Nozzle. For tractor models 8N, 9N, 2N. For Marvel-Schebler TSX241A, TSX241B, and TSX241C, TSX33, Ford 8N9510C, Ford 9N9510A. (Part No: 9N9530)
$13.02

Quadrant Throttle Plate - For tractor models 9N, 2N 1939-1947. (Part No: 9N9820)
$32.46

Screw Kit 4 Per PKG - Screw Kit, air cleaner funnel to hood, set of 4 screws and speed nuts. For tractors: 8N {1948-1952}. (Part No: 32940-KIT)
$10.07

Throttle Control Rod Spring - For tractor models 9N, 2N. (Part No: 2N9806)
$2.95

Throttle Rod - Rod, Throttle Control Rod and Socket. 2-1/2 inches long. Tractors: 9N, 2N (1939-1947). (Part No: 9N9810)
$9.95

Throttle Rod - This Governor to Carburetor Control Rod Assembly is 7 inches long and has a ball receptacle on both ends. For tractors: 8N, 9N, 2N (1939-1952). (Part No: 9N9818A)
$12.50

Throttle Rod - Rod, Throttle Shaft to Governor Rod Assembly is 10 5/8 inches long. For tractors: 9N, 2N (1939-1947) See part number 9N9700 for Choke Control Rod Assembly. (Part No: 9N9815)
$14.95

Throttle Rod Spring Retainer - For tractor models 9N, 2N. (Part No: 9N9812)
$2.95

Gauges
Ammeter - For all models to 1958. Terminal type ammeter. 30-0-30. Chrome ring. Replaces FAD10850A. (Part No: A0NN10670A)
$6.50

Oil Gauge Adapter Fitting - This Oil Gauge Adapter Fitting is 1/8 inch NPT female to 3/16 inch tubing female. It is used on some gauges without removable fitting. (Part No: 9N18685)
$3.75

Oil Line, Junction Block to Gauge - This is a pre-formed steel Junction Block to Oil Pressure Gauge line. It is used on Ford 9N and 2N tractors, 1939 to 1947. It replaces original part number 9N18676. (Part No: 9N18676)
$11.95

Oil Pressure Gauge - For tractor models: 8N, 9N, 2N, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 2000, 4000, NAA, Jubilee. All before 1964. Oil pressure gauge, 40 pounds, 2 inch body diameter. Replaces OEM numbers Ford: FAD9273A and Massey Ferguson: 506902M92. (Part No: S.61171)
$14.00

Oil Pressure Gauge, 50lb - For tractor models 8N, 9N, 2N. Oil Pressure Gauge, 50 lbs., 2 inch body diameter. (Part No: 9N9273A)
$11.78

Oil Pressure Gauge, 50lb Black - For tractor models 8N, 9N, 2N. Oil Pressure Gauge, 0-50 lbs., for 2 inch diameter hole. (Part No: 9N9273A-BLACK)
$11.57

Oil Pressure Gauge, 80 Pound, Black - For tractor models 8N, 9N, 2N, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 4 cylinder), NAA, Jubilee, 1801. Black raised bezel, measures to 80 pound, dash or bracket mounted gauge with a bracket and studs 1/8 inch NPT thread. Replaces FAD9273A. (Part No: FAD9273A_Black)
$11.27

Temperature Gauge Adapter Pipe - 3 5/8 inches long, 1 1/2 inches outside diameter. Uses 5/8 inch -18 UNF Temperature Gauge Lead. Installs in upper hose. Cut hose, slide new adapter pipe in place, drill 2 inch outside diameter hole in dash to mount gauge. For tractor models: 2N, 8N, 9N. (Part No: FDS2673)
$50.37

Hitch / Drawbar
Chain - CHAIN, Fixed Drawbar Safety Chain Assembly, EXACT reproduction of ORIGINAL Drawbar Chain. FOR tractors: 8N, 9N, 2N, Jubilee, NAA (1939-1954). (Part No: 9N5370)
$54.96

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models NAA, Jubilee, 2N, 8N, 9N, 340, 420, 600, 700, 800, 900, 2000, 2100, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 4000, 4110, 4600. (Part No: C5NN594E)
$10.88

Drawbar Link Check Chain Anchor - Anchor, Drawbar Link Check Chain (pair- one right and one left). For Dexta, NAA, Super Dexta, Jubilee, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610. (Part No: 957E5967)
$15.33

Drawbar, Heavy Duty, Heat Treated - Red Bar is 30 1/2 inches center hole to center hole, 2 1/2 inches wide, 1 1/8 inch thick (drawbar fits lift between lift arms). (Part No: 9N5182)
$38.30

Eyelet Assembly, Check Chain - This Check Chain Eyelet Assembly fits Many Ford Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces EC0N660A, NCB660A (Part No: EC0N660A)
$4.43

Hitch Ball 10000LB 2-5/16 - 2-5/16 inch ball size, 1-1/4 inch stud thread, 2-1/2 inch stud length, 10000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516114)
$23.85

Hitch Ball 15000LB 2-5/16 - 2-5/16 inch ball size, 1-3/8 inch stud thread, 2-5/8 inch stud length, 15, 000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516138_)
$25.04

Hitch Ball 2000LB - 1-7/8 ball size, 3/4 stud thread, 1-3/4 stud length, 2000 LB max load capacity, ONE CHROME hitch ball class. (Part No: CHB17834)
$13.37

Hitch Ball 3500LB - Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.74

Hitch Ball 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

Hitch Ball 5000LB 2-5/16 - Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

Level Box Fork - Right - Fork, Hydraulic Lift Leveling Rod, right hand. Length 10-1/4 inches. For 8N, 9N, 2N, Jubilee, NAA. (Part No: 9N585A)
$22.58

Level Box Handle - Lever Handle. For Jubilee, NAA, 2N, 8N, 9N, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. (Part No: 9N594)
$12.27

Leveling Box - Economy - For tractor models 8N, 9N, 2N, NAA, Jubilee, Dexta, Super Dexta. Working length of 19.5 to 27 inches. Pin holes are 3/4 inch. (Part No: ECON577AB)
$26.18

Leveling Box Assembly, Right - This Right Hand Leveling Box Assembly uses 5/8 inch pins and opens center-to-center from 17.75 to 21.5 inches. Adjusts 21.5 inches. Width of the fork is 9/16. For 8N, 9N, 2N, NAA, Jubilee. (Part No: 8N577A)
$48.99

Leveling Box Gear - Gear, Leveling Box Pinion. For 2000, 2N, 3000, 4000, 501, 600, 700, 800, 8N, 900, 9N, Jubilee, NAA. (Part No: B9NN568A)
$12.27

Leveling Box Knuckle Pin - MUST ORDER IN QUANTITY 2, PRICED EACH. For tractor models NAA, 600, 601, 700, 701, 800, 801, 801, 701, 801, 900, 901, 8N, 9N, 2N all built 1939 to 1964, (2000, 3000, 4000 1965 and up), (3600, 4600 1975 and up). 5/8 inch pin diameter, 2 7/8 inch usable length. Takes our 3/16 inch linchpin (part number DKP316). MUST ORDER IN QUANTITY OF 2, PRICED EACH. (Part No: 9N595)
$1.88

Leveling Box Knuckle, Right - Knuckle, Right Hand Leveling Assembly. Pin holes are 5/8 of an inch. The shape of the one pictured may vary slightly from different manufacturers. For tractor models NAA, Jubilee, 2N, 8N, 9N, 501, 600, 700, 800, 900, 2000, 3000, 3600, 4000, 4600. Uses 2 pins part number 9N595. (Part No: 957E566)
$7.82

Leveling Box Shaft - This Leveling Box Shaft and Gear measures 14 inches long with thread length of 4 inches. Diameter is 3/4 inches. For Jubilee, NAA, Dexta, Super Dexta, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000. (Part No: NCA579B)
$18.38

Leveling Box Yoke Rod, LH - Left hand side. Rod diameter is .750 inches. For tractor models NAA, Jubilee, 2N, 8N, 9N, 30, 340, 420, 600, 620, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 2100, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 4110. (Part No: C5NNB863A)
$28.90

Leveling Rod, Left Hand - Lift Link, left hand, non-adjustable. Hole centers approximately 20 inches. Replaces 9N564B, C5NN564B. (Part No: 182544M92)
$45.30

Lift Arm - 32 Inch - Cat 1 - Lower Lift Arm, heavy-duty, with forged ball-joint ends. Category I accommodates 7/8 inch drawbar or lower link pins. Painted blue. Length 32 inches. For tractor models 8N, 9N, 2N, Golden Jubilee and NAA. (Part No: JSA1002B)
$51.17

Lower 3-Point Pin Support Plate Gasket - Two used per tractor, sold individually. For tractor models (9N serial number 6019 and up), (2N mid 1939-1947). (Part No: 9N523B)
$1.95

Stabilizer Arm - Stabilizer arm measures length 31-1/2 inches center to center. For tractor models 2N, 600, 800, 8N, 9N, Jubilee, NAA, 2000 (4 cylinder), some 4000 (4 cylinder). Color of part can be red or primer depending on supply. (Part No: 230042R)
$19.10

Stabilizer Bracket - Used on the left or right side, this bracket has mounting bolt hole spacing of 5 inches on center. It is 6.75 inches long and 0.375 inches thick. This part replaces 231254, C5NNN928D, 181775M1, 181775M91, 181776M91. Color varies. This part may arrive Red, Blue, or Black. (Part No: 231254)
$13.65

Stabilizer Pin with nut and lockwasher - Category I.Length 2.625 inches, pin diameter†0.875 inches, thread 0.625 inches-18. Replaces original part numbers C5NNA889A, 81813825, 81822760, 81823752. (Part No: SBP75-WNL)
$1.82

Stay Strap, Lower Blue - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (R3575) (Part No: 9N5375B)
$15.84

Stay Strap, Upper Blue - Painted blue, 25.500 inches long, .250 inches thick, 1.500 inches wide, .937 inch hole, .613 inch x 6.625 inch slot. For tractor models 600, 700, 800, 8N, 900, 9N, NAA. (Part No: 9N5374B)
$14.19

Thrust Bearing - Leveling Box Assembly Bearing. For 2N, 8N, 9N, 501, 600, 700, 800, 900, 2000, 3000, 3600, 4000, 4600, Dexta, Super Dexta, Jubilee, NAA. (Part No: 9N554)
$11.16

Top Link Rocker - For 8N, 9N, 2N, NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800 Hi-clearance, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 2000 4 cylinder Hi-clearance, 4000 4 cylinder Hi-clearance. (Part No: NCA535A)
$45.53

Hydraulic System
Bushing - Bushing for Hydraulic Pump Base, for PTO Shaft. For 8N, 9N, 2N. (Part No: 9N649A)
$25.69

Bushing Insert - Hydraulic Pump Bushing Insert. Measures Overall length is 1 1/16, big end diameter is 1/2, small end diameter is 3/8+, inside diameter is 1/4. (Part No: 192164)
$7.76

Cam Block - For Hydraulic Pump, 9N, 2N and 8N (1939-1952). (Part No: 9N617A)
$28.00

Chamber Kit - Repair kit for one Hydraulic Pump Chamber. Fits either left or right. For 8N, 9N, 2N. (Part No: 9N621KIT)
$23.58

Draft Control Plunger - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Fine Thread style. (Part No: 8N541B)
$37.08

Draft Control Plunger Spring - This Draft Control Plunger Spring fits between the Hydraulic Plunger and Yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (except row crop), Dexta, Super Dexta. (Part No: 9N547B)
$36.08

Draft Control Spring Plate - This Draft Control Spring Plate is used on Ford tractors from 1939 to 1964. It replaces: 81801555, 957E527, 9N527, NCA527A. I you need the plate with the pin, order 8N527. (Part No: 9N527)
$10.50

Draft Control Spring Seat - Exact of original. Fits all models (1939 to 1964), NAA, Jubilee, Dexta, Super Dexta, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. Replaces: 2N624, 957E624. (Part No: 2N624)
$6.50

Draft Control Yoke - This Draft Control Yoke Fits 8N, 9N, 2N and fits with 8N541B. Fine Tread Style. (Part No: 9N546C)
$24.50

Felt, Spring Seat - Hydraulic Lift Draft Control Spring Seat. For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Part No: 9N529)
$3.95

Friction Disk for Hydraulic Control Lever - Friction Disk for Hydraulic Control Lever, 3 inch diameter, 1/2 inch hole. For tractor models 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, NAA, (2000 and 4000 4 cylinder). Price is for each. (Part No: C5NN518B)
$1.46

Gasket, Hydraulic Cylinder to Center Housing - Hydraulic Cylinder Gasket measures 1 inch outside diameter and 7/16 inch inside diameter. For tractor models 8N, 9N, 2N. Priced each. (Part No: 9N552)
$1.41

Gasket, Hydraulic Pump Drain - Hydraulic and Transmission Drain plug Gasket. 2 inch inside diameter. Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Part No: 8N7011)
$1.38

Hydraulic Lift Control Quadrant - For tractor models 8N, 9N, 2N. Hydraulic Lift Control Lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 1939-1964 4 cylinder. Replaces 2N516A1, 2N516A2, 2N516B. Uses friction disk C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Part No: 9N515)
$22.43

Hydraulic Lift Cover Repair Kit - For 8N, 9N, 2N. Lift Cover Repair Gasket Kit. Gasket Set includes 2 valve chamber gaskets, lift cover gasket, base pump gasket, 2 inspection cover gasket cylinder to center housing cover, 2 hydraulic lift cylinder housing gasket. (Part No: LCRK928)
$6.86

Hydraulic Lift Cylinder - For 8N, 9N, 2N. Hydraulic Lift Cylinder. Cylinder only. Can use 3 ring piston or o-ring type. Sold seperately. (Part No: 9N510D)
$77.28

Hydraulic Lift Level Indicator (Dip Stick) - 8N, 9N, 2N, NAA. Hydraulic Lift Level Indicator. (Part No: NAA927C)
$4.04

Hydraulic Lift Lever - For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 Cylinder). (Part No: S.66598)
$20.63

Hydraulic Lift Piston Connecting Rod - For Dexta, NAA, 2N, 8N, 9N, 2000, 3000, 4000, 600, 700, 800, 900. Replaces NCA526A and 957E526, 9N526. (Part No: 86563314)
$23.30

Hydraulic Lift Piston O-Ring - For 8N, 9N, 2N. O-Ring used on piston part number NAA530B. Price is for each. Used with Lift Piston Washer part number NAA473A. NOTE: The leather washer goes on first, then the o-ring. (Part No: NAA533A)
$2.03

Hydraulic Lift Piston Rings - Kit of 3, steel, fits piston part number 9N530B. For tractor models 8N, 9N, 2N. (Part No: 9N675)
$10.64

Hydraulic Lift Piston Washer - For 9N, 8N, 2N. Hydraulic Lift Piston Washer used with Piston part number NAA530B. Price is for each. (Part No: NAA473A)
$4.00

Hydraulic Lift Ram Arm - Hydraulic Lift Ram Arm fit the 8N, 9N, 2N. This part will work for the 9N, 2N and early 8N but does not look like the original. This does look like the original for the Late 8N. For an early 9N, this part may require additional machining, such as grinding down the end raised portion, and/or shortening one end 1/4 inch and adjusting with shims. (Part No: 8N545B)
$82.79

Hydraulic Lift Shaft - For tractor models: 8N, 9N, 2N, NAA, Jubilee, 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901. Hydraulic lift shaft. [PLEASE NOTE: THIS SHAFT HAS 1 THREADED HOLE ON EACH END. IT WILL REPLACE OLDER STYLE USED ON 8N, 9N, 2N TRACTORS WITH 2 HOLES ON EACH END BUT WILL REQUIRE 2 WASHERS PART number NCA551A and (2) 7/16 inch-20 X 11/16 inch BOLTS. WASHERS AND BOLTS NOT CURRENTLY AVAILABLE FROM YESTERDAYS TRACTOR]. (Part No: NCA544B)
$400.55

Hydraulic Lift Shaft Arm - For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000 gas. (Part No: 9N543B)
$58.65

Hydraulic Lift Shaft Bushing - This Hydraulic Lift shaft Bushing measures inside diameter 2.000 inches, outside diameter 2-3/8 inches, length 3.00 inches. Sold individually, 2 used per tractor. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 3000, 4114. Replaces 86534029, 9N531C (Part No: 9N531C)
$31.88

Hydraulic Pump Drive Shaft - APPLICATION: 8N, 9N, 2N, SHAFT DIAMETER: 3/4 Inch, SHAFT OVERALL LENGTH: 13-1/16 InchES, END A TYPE: KEY, END A SIZE: 3/4 Inch, END B TYPE: LEFT HAND THREAD, END B SIZE: 5/8 Inch. END A mates to coupler L601-14. END B mates to hub 191196. (Part No: 190760)
$35.56

Hydraulic Pump Drive Shaft - For tractor models 8N, 9N, 2N. 3/4 inch shaft diameter, 13 inches in length, 6 spline on one end and .187 inch keyway on other end. Mates with end hub 192161 or 54C2055. Other end mates with coupler L601-14. (Part No: 194354)
$27.24

Hydraulic Pump Hub - Hydraulic pump hub for Sherman 54 series loader. Hydraulic pump hub 3 7/8 inch outside diameter, 2 3/4 inches center to center on holes. 6 spline center bore, 3/4 inch inside diameter. (Part No: 54C2055)
$38.12

Hydraulic Pump Hub - For tractor models 8N, 9N, 2N. Hydraulic Pump Hub is 3 inches outside diameter, 2 13/32 inches center to center on pins (no holes). Includes pins. (Part No: 191196)
$46.70

Hydraulic Pump Hub - Hydraulic Pump Hub is used on tractor models 8N, 9N, 2N. Verify measurements. Hydraulic Pump Hub is 3 3/8 inches outside diameter, 2 3/8 inches center to center on holes. 6 spline - center bore = 5/8 inch on the lands and 3/4 inch on the grooves. Used with part numbers 192160 and 194354. (Part No: 192161)
$50.27

Hydraulic Pump Overhaul Kit - For 8N, 9N, 2N (1939-52). Kit contains cam blocks, pistons, chamber kits, PTO shaft bushing, safety valve, and gaskets. (Part No: HPOK1)
$177.59

Hydraulic Pump Rebuild Kit, Comprehensive - For tractor models 8N, 9N, 2N (1939 to 1952). Kit contains 2 cam blocks, 2 pistons, 2 chamber repair kits, PTO shaft bushing, safety valve, 2 valve chambers with valves, base gasket, sump pump gasket, 2 side gaskets, PTO shaft gasket, 2 side plate gaskets. Note, it may be necessary to grind the opening where the pump fits in some tractors. (Part No: S.61725)
$316.43

Hydraulic Pump Shaft for Loader - APPLICATION: 720 Loader. (Mates to end coupler L601-14 and End hub 290421). SHAFT DIAMETER: 3/4 ", SHAFT OVERALL LENGTH: 8-3/8 ", END A TYPE: Key, END A SIZE: 3/4 ", END B TYPE: 10 Spline, END B SIZE: 1 ". (Part No: 197118)
$27.09

Hydraulic Pump Valve Chamber - Left Hand Valve Chamber, less valves. For 8N, 9N, 2N. (Part No: 9N622)
$92.10

Hydraulic Pump Valve Chamber - Right Hand Valve Chamber, less valves. For tractor models 9N, 8N, 2N. Cast Iron.9N621-C (Part No: 9N621)
$84.18

Hydraulic Pump Valve Chamber Assembly, LH - Left Hand Valve Chamber with valves. For tractor models 8N, 9N, 2N. Cast Iron. (Part No: 9N622-ASSY)
$92.10

Hydraulic Pump Valve Chamber Assembly, RH - Right Hand Valve Chamber with valves. For tractor models 9N, 8N, 2N. (Part No: 9N621-ASSY)
$88.65

Hydraulic Safety Valve Assembly - For tractor models 8N, 9N, 2N. Mounts on the hydraulic pump on 2N, 8N, 9N. **Note: The part you receive may look different than pictured, but will fit and work the same. Replaces: 8N638. (Part No: 8N638)
$20.18

Hydraulic Spring Seat - For tractor models 8N, 9N, 2N, NAA, 600, 900 (1948-1954). Also replaces 181083M1 and 181098M1. (Part No: 9N525B)
$9.95

Hydraulic Valve Assembly - This version does NOT have a slot in the round end. For (9N with 9N600 Pump Assembly), (2N with 9N600 Pump Assembly 1939-1947). Hydraulic Valve Assembly includes housing, pintle, spring, pin clip, fully assembled. (Part No: 9N640)
$18.75

Hydraulic Valve Spring, Intake - Hydraulic Intake Valve Spring is goes between the pump control valve and the bushing. Ford 1939-1952. It replaces original part number 8N697 (Part No: 8N697)
$15.21

Hydraulic pump base to center housing Gasket - For tractor models 8N, 9N, 2N. (Part No: 9N611)
$1.95

Lift Cover Gasket - This Lift Cover Gasket is used on Ford 9N, 2N, 8N, NAA and Jubilee Tractors. Replaces NAA502A (Part No: NAA502A)
$2.13

Lift Cylinder Housing Gasket - For tractor models 8N, 9N, 2N. (Part No: 9N553)
$.74

Lift Piston - This is a single groove Hydraulic Lift Piston that measures 2-1/2 inches in diameter, groove is centered 1 1/4 inch from bottom of piston. O-Ring available as NAA533A and back up washer as NAA473A. For tractor models NAA, NAB, 8N, 9N, 2N, Jubilee. (Part No: NAA530B)
$29.63

Lift Piston - 3 Ring Piston, Hydraulic Lift. For 8N, 9N, 2N. Uses 9N675 ring set. (Part No: 9N530B)
$29.25

Lock Washer, Assembly - Lock Washer Assembly for hydraulic lift shaft to arm. For tractor models 9N, 8N, NAA (1939-1954). (Part No: 9N550)
$6.89

Piston for Hydraulic Pump - For 8N, 9N, 2N (1939-52). (Part No: 9N615)
$42.68

Plate Hydraulic lift Control - Friction plate for hydraulic lift lever control. Use with disc C5NN518B. For 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, Jubilee, NAA 2N516B. Uses friction disk C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Part No: 9N515)
$23.10

Quadrant Stop Kit - For tractor models 2000 4 Cylinder, 2N, 4000 4 Cylinder, 8N, 9N, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031 all with 4 Cylinder from 1939 to 1964. (Part No: 9N521)
$8.24

Valve chamber to base Gasket - For tractor models 8N, 9N, 2N (1939-1942). (Part No: 9N613)
$0.98

Implements
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

Tail Wheel Assembly - 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Lights
Bracket - Headlight bracket reinforcement, clear zinc plated for WINGED headlight bracket. For tractors: 9N, 2N, 8N {1939-1949}. (Part No: 9N13102)
$4.95

Headlight Bracket, Winged Left - Winged Headlight Bracket for left side. For tractor models 8N, 9N, 2N, NAA. (Part No: 9N13473)
$17.50

Headlight Bracket, Winged, Right - Headlight Winged Bracket for the right side. For tractor models 8N, 9N, 2N, NAA. (Part No: 9N13472)
$17.50

Headlight Clip Set, Pack of 7 - Clip, headlight wiring to hood. Set of 7. For tractors: 8N, 9N, 2N {1939-1952}. Replaces OEM part number 358297S32. 7 Required per tractor. (Part No: 358297S7)
$4.95

Headlight Reinforcement Plate - Fits Ford tractors from 1939 and up. (Part No: FAA13102A)
$3.41

Headlight Set - 6 Volt - This Headlight is exactly like the factory original with TRACT-O-LITE stamped into housing for tractor models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For tractor models 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 8N, 9N, 2N, NAA 1939-1964. This is a pair of headlight assemblies complete with sealed beam bulb. Replacement sealed beam bulbs available as p/n L4019. (Part No: 2N13005-6V)
$203.70

Headlight, 12 Volt - 12 Volt, 5-3/4 inch diameter, sealed beam bulb. Fits 8N, 9N, 2N, Complete assembly is a copy of original headlight, IS NOT EXACTLY LIKE ORIGINAL. Single unit Replaces 13005C or 13006C assemblies (right hand or left hand). (Part No: S.66419)
$46.85

Headlight, 6 Volt, RH or LH - Headlight for 8N, 9N, 2N, Complete assembly is a copy of original headlight. NOT EXACTLY LIKE ORIGINAL. Replaces 2N13005C and 2N13006C. (Part No: 2N13005C)
$45.83

Knob, Light Switch - Aluminum. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000. (Part No: 9N9703)
$4.65

Light Rim - Headlight Door Assembly {rim}. For tractors with TRACT-O-LIGHT stamped lights only. For tractors: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900 {1939-1956}. This rim is 3/4 inch in width. (Part No: 2N13043)
$14.95

Light Rim CHROME - For tractors with TRACT-O-LIGHT stamped lights only. For tractors: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900 {1939-1956}. Replaces 2N13043. (Part No: S.67891)
$19.65

Light Switch - For tractor models 8N, 9N, 2N, NAA, Jubilee. Light Switch with fuse. (Part No: 8N11654B)
$10.88

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

Sealed Beam Bulb, 6 Inch - The Sealed Beam Bulb is 6 Volt, 5.625 inches in diameter and has two contacts. Fits models: NAA, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. It replaces Ford part number 310061. (Part No: 1002802M91)
$13.25

Switch, Headlight - Assembly with pigtail wire connectors. This is an EXACT reproduction of the ORIGINAL headlamp switch. For tractor models 8N, 9N, 2N (1939-1949). (Part No: 9N11652)
$9.87

Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Part No: TLBULB12V)
$1.14

Tail Light Assembly - This is a restoration quality Taurus​ ​Taillight​ ​Assembly.​ ​1939-47​ ​9N, ​ ​2N. It comes grey Powder Coated, rim and bucket. Includes 6V bulb, wiring and mounting studs and nuts. Includes small moisture drain hole which was a later year improvement. Replaces 9N13404 (Part No: 9N13404)
$59.95

Tail Light Assembly - This is a restoration quality Taurus​ ​Taillight​ ​Assembly.​ It comes grey Powder Coated, bucket and polished stainless steel rim. Includes 6V bulb, wiring and mounting studs and nuts. Includes small moisture drain hole which was a later year improvement. Replaces 9N13404 (Part No: 9N13404SS)
$59.95

Tail Light Assembly, 6 Volt - Exact as Original in Every Detail. Ford Duolamp (stamped in tailight housing) tractors: 8N, 9N, 2N (1939-1952). If Using in a 12 Volt system order 12 volt bulb part number TLBULB12V and replace. (Part No: 8N13404)
$39.50

Tail Light Bezel - This Taillight Bezel is used on Taurus Taillights 9N13404 and 9n13404SS. It is zinc plated steel. It replaces 9N13448 (Part No: 9N13448)
$9.41

Tail Light Bezel - This Taillight Bezel is used on Taurus Taillights 9N13404, 9n13404SS, 1751422M91 and 1750667M91. It is polished stainless steel. It replaces 9N13448 (Part No: 9N13448SS)
$22.56

Tail Light Fender Bracket Pair - These Tail Light Fender Brackets come as a pair. One left and one right for tractor models 8N, 9N, 2N (1939-1952). Replaces: 9N13470, 9N13471. Sheet metal / body parts need to be sanded and painted to match your tractor. (Part No: 9N13471)
$35.85

Tail Light Lens - This Lens is used with 9N13404, 9N13404SS, 1750662M91 and 1751422M91 Taurus Taillights. It replaces 9N13450. (Part No: 9N13450)
$22.56

Tail Light Lens Gasket - This Lens Gasket is used with 9N13404, 9N13404SS, 1750662M91 and 1751422M91 Taurus Taillights. It replaces 9N13460 (Part No: 9N13460)
$14.16

Tail Light License Lens Gasket - This Lens Gasket is used with 9N13404, 9N13404SS, 1750662M91 and 1751422M91 Taurus Taillights. It replaces 9N13447 (Part No: 9N13447)
$3.11

Tail Light Wire Clip - For 8N, 9N, 2N, NAA and Jubilee to 1954. Rear lamp wire clip. 6 required per tractor. (Part No: 9N17668)
$1.95

Tail Lite, License Light, Clear Glass Lens - This Tail Lite is used with 'Taurus' style tail lights, originally used 1939-1947. It may be found on later tractors if a Taurus lamp was used. Uses Gasket FAA13447A, not included. (Part No: 9N13445)
$20.46

Tail Lite, License Light, Lens Gasket - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 all 1939-1953. Replaces 40-13460, FAA13447A (Part No: FAA13447A)
$2.95

Taillight Mounting Bracket - Exact of original. Manufactured in USA. For tractors with Taurus Tail Light: 9N, 2N (1939-1948). (Part No: 9N13423)
$23.61

Taillight Mounting Bracket - Exact of original. Manufactured in USA. (goes between tail light and fender bracket, mounting on top of 9N13470 or 9N13471.) For DUOLAMP tractors 8N, 9N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4-cylinder), 1801 series (1949 to 1954). (Part No: 8N13423)
$9.95

Worklight Mounting Socket - Fender bracket round spacer, worklight to fender bracket {included with work-light assemblies}. For Ford tractors: thru 1958 (Part No: 8N15532)
$12.75

Miscellaneous
Historical Tractor Photographs - These beautiful black and white photo reproductions are of 9N, 2N and 8N Ford tractors. Set of 16 photos (12 inches x 18 inches). These are good semi-glossy prints suitable for framing. Great for the shop or as a gift! (Part No: S.22994)
$96.43

Tractor Cover - Tractor Cover Fits 8N, 9N, 2N. Rugged synthetic material. Color varies. No Logos. (Part No: S.60175)
$151.14

Oil System
Engine Oil Dipstick - For tractor models 8N, 9N, 2N. (Part No: B2NN6750A)
$5.84

Gasket, Oil Pan Drain Plug - Fits Ford Tractors 1939 to 1964, Models: NAA, NAB, Jubilee, 2N, 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000. This gasket measures 2.632 inches inside diameter, 3.085 inches outside diameter, .250 inches wide and it is .059 inches thick. Replaces 8N6734. (Part No: 8N6734)
$1.79

Oil Filler Breather Element - Fits caps 310030 and 8N6766B. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. (Part No: 8N6782A)
$4.40

Oil Filler Cap - Oil Filler Breather Cap. For tractors: 8N, 9N, 2N (1939-1950). Overall length is 3 5/8 inches, 1 1/4 inch diameter tube and tube is 1 3/8 inches long. (Part No: 9N6766)
$19.95

Oil Filler Cap with Element - Oil filler cap measures 3 1/2 inches diameter. Insert is 1 1/4 inches outside diameter. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Overall length is 3 5/8 inches, 1 1/2 inch diameter tube and tube is 1 3/8 inches long. Also replaces OEM 8N6766B. (Part No: 310030)
$11.04

Oil Filter - Oil Filter with gasket measures 4 inches in length and 3 11/16 inches in diameter. For tractors: 8N, 9N, 2N (1939-1952), 340. For Balers: 166, 271, 272, 273, 283, 286. (Part No: APN6731B)
$8.31

Oil Filter Outlet To Block Line - This Oil Filter Outlet to block line is used on Ford 9N and 2N Tractors, 1939 to 1947 with Cast Iron Governor. Replaces 9N18666. (Part No: 9N18666)
$18.96

Oil Filter To Junction Block Line - This Oil Filter to junction block line is pre-bent steel. It is used in Ford 9N and 2N, 1939 to 1947. It replaces original part number 9N18667. (Part No: 9N18667)
$22.56

Oil Pan Plug Kit - Gasket, Oil Pan Plug and Screen Assembly. For all gas models 1939-1964. Fits 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: 9N6730WG)
$12.75

Oil Pick Up Tube - This Oil Pick Up Tube comes as pictured for tractor models 8N, 9N, 2N. Part does not come with gasket. Gasket can be ordered separately as part number 9N6619. Replaces: 86604201, 8N6615, 9N6615. (Part No: 8N6615)
$33.96

Oil Pump Body - For tractor models 9N, 2N, 8N to serial number 247571. For pumps with 9/16 inch gear width. Pump body assembly does not include gears. (Part No: 9N6603)
$101.43

Oil Pump Bushing - Fits 8N, 9N, 2N. (Part No: 9N6612A)
$5.31

Oil Pump Cover Gasket - For 8N, 9N, 2N. Replaces 9N6619 (Part No: 9N6619)
$1.13

Oil Pump Gear - Gear, oil pump driven, width 9/16 inch. For tractor models 8N, 9N, 2N. (Part No: 52-6610B)
$21.39

Oil Pump Gear - Gear, oil pump drive, width 9/16 inch. For tractor models 8N, 9N, 2N. (Part No: 52-6614B)
$27.60

Oil Pump Gear - For 8N, 9N, 2N. Oil pump large gear with 1 1/2 inch shaft for oil pump body number 9N6603. (Part No: 9N6608A)
$40.16

Oil Pump Kit - Complete Oil Pump Repair Kit. For Ford 8N, 9N, 2N prior to serial number 247570 (1939-1948). For pumps with 9/16 inch gear WIDTH. Early and late pumps are interchangeable, so measure small gear width before ordering. (Part No: APN6600A)
$40.94

Oil Pump Relief Plunger Spring - Oil Pump Relief Plunger Spring. For tractor models 8N, 9N, 2N (1939 to 1952). (Part No: 9N6654)
$0.95

Oil Relief Valve Inlet Gasket, Pack of 5 - For tractor models 8N, 9N, 2N. (Part No: 1GA6669)
$1.88

Oil Terminal Block - For tractor models 9N, 2N from 1939-1947. (Part No: 9N6722)
$14.61

Plunger - Plunger, Oil Pump Relief Valve. For tractors: 8N, 9N, 2N, (1939 to 1952). The spring is available separately as 9N6654. (Part No: 01A6663)
$9.95

Reamer - Replacement reamer for oil pump tool. For tractor models 8N, 9N. (Part No: OPT20R)
$65.87

PTO / Driveline
Bearing, PTO Shaft - This PTO Shaft Bearing is for the original 1 1/8 inch shaft, measures 2 37/16 inches outside diameter, 1 3/16 inch inside diameter, 5/8 inch width. For 8N, 9N, 2N, NAA (1953-1954), Jubilee, NAB, 600 thru 1956. Replaces 9N715C. Also used as a PTO Shifter Support Housing Bearing with 3 and 4 speed transmissions. Used as an upper PTO Countershaft Bearing on 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1630, 1710, 1715, 1725, 1925 Replaces 210064, 9N715B, 9N715BC, 9N715C, SBA040106206 (Part No: 9N715BC)
$5.24

PTO CAP - Fits most Ford Tractors 1939 and later. Replaces part numbers 81809440, 310088, 80310088, 310088F, 0310088F (Part No: 310088)
$6.08

PTO CAP - This PTO Cap is for 1-1/8 or 1-3/8 inch PTO shafts. Like original. 3 1/2 inches in length. Inside usable length is 2 7/8 inches. Replaces 2N726, NCA726A, 2N726, NCA726A (Part No: 2N726)
$7.34

PTO Collar with Pin - Collar with tapered pin fits models: 9N, NAA, Jubilee, 600, 800, 900 (Part No: NAA70038C)
$18.88

PTO Housing Gasket - This PTO Housing Gasket is used on many Ford tractor models: Dexta, Super Dexta, NAA, 2N, 8N, 9N, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445A, 515, 530A, 531, 540A, 540B, 545A, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 4000, 4400, 4500. Replaces: 81801907, 957E4129, 9N4129, C5NN747A. (Part No: C5NN747A)
$1.00

PTO Shaft - PTO Shaft. For 8N, 9N, 2N (converts 1 1/8 inch shaft to 1 3/8 inch spline. This is the shaft only. (Part No: 9N710-38)
$71.94

PTO Shaft Bearing, Front - For tractor models: Dexta, Super Dexta, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 3900, 4000, 4100, 4110, 4110LCG, 4400, 4500, 4600, 4610, 5000, 5600, 5610, 5610S, 5900, 6600, 6610, 6610S, 6700, 6710, 6810, 7600, 7610, 7610S, 7700, 7710, 7810S, 8010. All WITH 1 3/8 Inch DIAMETER PTO SHAFT. WILL NOT FIT 1 1/8 Inch DIAMETER PTO SHAFT. Replaces 81800755, C5NN7118A, 20705250, E75GE9 (Part No: E75GE9)
$5.18

PTO Shaft Conversion Assembly - Shaft Assembly with cap converts 1-1/8 inch PTO system to 1-3/8 inch. Assembled and ready to install by removing 4 bolts from cover. Length 30-7/8 inches. Uses gasket C5NN747A (included). (Part No: 9N700-38)
$67.84

PTO Shaft Housing - This PTO Shaft Housing is for models 8N, 9N, 2N, (NAA 1953-1954), Jubilee, NAB. (Part No: 9N733B)
$31.97

PTO Shaft Seal, Double Lip - For All Models: 1939 thru 1964 with 1-1/8 inch or 1-3/8 inch PTO shaft. 2.45 inch outside diameter, 1 5/8 inch inside diameter, 5/8 inches wide. Replaces OEM numbers : D8NN703AA & D9NN703BA, and 9N703B. (Part No: D9NN703BB)
$3.62

PTO Shaft Sleeve Bushing, 1-1/8 - For 1-1/8 inch PTO Shafts (NOT 1-3/8 inch) 1.113 inch inside diameter, 1.620 inch outside diameter, 1 inch thick. For tractor models 9N, NAA (1953 to 1954), 2N, 8N, NAB, 600, 700, 800, 900. (Part No: 9N735B)
$6.50

PTO Shaft Sleeve Bushing, 1-3/8 - For 1-3/8 inch PTO Shafts, 1.185 inch inside diameter, 1.620 inch outside diameter. For tractor models 9N, NAA (1953-54), 2N, 8N, NAB, 600, 700, 800, 900. all with 1-3/8 inch PTO shaft. (Part No: 9N73538)
$4.14

PTO Stop - This PTO Stop is used on 3, 4 and 5 speed transmissions. 8N, 9N, 2N, NAA, 500, 600, 700, 800, 900, 501, 601, 701, 801, 901, 2000-4000 4 CYLINDER, 2000, 3000, 3400. (Part No: NAA722A)
$29.44

PTO, Snap Ring - For tractor models 8N, 9N, 2N, NAA all 1943-1954. 2.58 inches outside diameter, 2.26 inches inside diameter. (Part No: 9N754)
$2.15

Paint
Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312GAL)
$44.00

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312QT)
$17.55

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312SP)
$44.19

Paint, Dark Gray, 1 Gallon - For tractors: 9N, 2N (1939 to 1947). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2888GAL)
$44.00

Paint, Dark Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2888QT)
$17.55

Paint, Ford White, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP470QT)
$26.06

Paint, Ford White, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP470SP)
$58.95

Paint, Red Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987SP)
$44.19

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225GAL)
$44.00

Seats
Pan Seat - This 19 inch wide Fixed Seat For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 2000, 4000, all with 4 Cylinder Engine. This is not a Flip-Over Seat. The color of paint varies and will not match your tractor paint. You will need to repaint it to match your tractor. (Part No: 8N400)
$40.79

Pan Seat - 19 inch wide Flip-Over Style. Replaces OEM number C5NN400AE. Seat only - does not include spring or bracket. For NAA, Jubilee, 600, 800, 2000, 4000, 8N, 9N, 2N (4-Cylinder). May come different color than pictured. (Part No: C5NN400AE)
$42.78

Seat Cushion (Blue and White) - For all Ford Tractors with 21 inch wide Steel Pan Seat. This seat cushion is blue and white with a FORD script logo. (Part No: R4120)
$34.65

Seat Cushion (Red and White) - Seat Cushion. Deluxe with 2 inches of foam padding. For all Ford Tractors with 19 inch wide Steel Pan Seat. This seat cushion is red and white with a FORD script logo. (Part No: R4118)
$33.75

Seat Cushion (Red) - For all Ford Tractors with 19 inch wide Steel Pan Seat. This seat cushion is red with a FORD script logo. (Part No: 8N401R)
$44.84

Seat Cushion, Blue - For all Ford Tractors with 19 inch wide Steel Pan Seat. This seat cushion is blue with a FORD script logo. (Part No: 9N401B)
$41.46

Seat Spring - Fits 9N, 2N (AI) (Part No: 9N404)
$49.01

Tie-On Seat Cover - Tie-On Seat Cover. 19 inch Tie-On Cover with White Script Ford Logo. Fits models: NAA, 2N, 8N, 9N, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 4000. (Part No: R4117)
$33.00

Sheet Metal / Body Parts
Air Cleaner Door - Air Cleaner Door with fastener. COMES PRIMERED, NOT PAINTED. For Air Cleaner opening in hood. For tractor 8N (1948-1952). Also for 9N and 2N when replacing hood with 8N16612. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 8N9661)
$10.56

Battery Cover, Snap In - This snap in place Battery Cover installs under the Hood Door and prevents fuel from spilling onto the battery. This part comes Zinc Plated and ready for paint. Used on Ford 9N and 2N tractors, 1939-1947. It Replaces original part number 9N10737. (Part No: 9N10737)
$33.56

Battery Door Handle Kit - Contains Battery Door Latch with Handle and Stud. For tractor models 9N, 8N, 2N. (Part No: 9N16625-56)
$23.79

Battery Door Hinge Kit - For tractor models 8N, 9N, 2N. Contains Hinge for Battery Door. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 9N16651-89)
$22.67

Battery Door Latch Kit, Black - Door Latch and Handle with stud. For tractor models 8N, 9N, 2N. Includes nut. (Part No: 9N16625B)
$16.95