FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case 580K Parts

Category: Steering

[Categories] [All 580K Parts] [All Case Models]

Axle End, Left Hand - For Case Construction and industrial models 480D, 480E, 480ELL, 580C, 580D, 580K, 580SD (Super D), 580SE (Super E), 580SK, Replaces Case OEM number D69360, Left Side Axle End, For Axle End, Right Hand use Item #: 104358, (Item #: 104357) $490.00

Axle End, Right Hand - For Case Construction and industrial models 480D, 480E, 480ELL, 480LL, 580C, 580D, 580K, 580SD, 580SE, 580SK, 584D, 584E, 585D, 585E, 586D, 586E, 590 (Turbo), Replaces Case OEM number D69359, Right Side Axle End, For Axle End, Left Hand use Item #: 104357, (Item #: 104358) $416.00

Bushing - For Case Construction and industrial models 580K, 580L, 580L (series 2), 580M, 580SK, 580 Super L, 580 Super L (series 2), 580 Super M, 590 Super L, 590 Super L (series 2), 590 Super M, Replaces Case OEM number D138047, (Item #: 157669) $10.30

Front Axle Oil Seal - Used on some Carraro 4WD front ends, the seal replaces OEM numbers 153326217, 5122548, 5105932, CAR115715, 83944350, K262811, K395039, EQ501510 (Item #: 156134, Ref: CAR115715) $9.64

Half Shaft Inner Seal - The measurements on this seal are: 62mm outside diameter, 42mm inside diameter, 14mm wide. This seal is used on the inner portion of a half shaft on Carraro front axles. Replaces OEM numbers 9968001, 73403999, CAR116723, 83952335, 1966164C1, 09968001, 3475332M1, KH1213, VKH1213 (Item #: 129289, Ref: CAR116723) $12.10

Hub Seal, MFWD - Extensively used on Carraro mechanical four wheel drive front axles, this hub seal measures 149mm (5.86614 inches) x 176mm (5.86614 inches) x 16mm (0.629921 inches). Replaces OEM numbers 9968085, K395102, 47108806, 83996064, 82920209, 294169A1, 247877A1, 130182A1, 1349265C1, CAR126324, CAR47705, 3225110, 0003225110, 82920209, 3996064, 83996064, 83957862, 9968085, 153326219, 153326621, 1349265C1, 153326301, 09968085, 83952509, 83952530, CAR118556, CAR126324, CAR47705, CAR126390, 3501510M1, 3475598M1, 3475533M1, 3523062M1, 3541510M1 (Item #: 157753, Ref: 247877A1) $56.00

King Pin - Used in Mechanical Four Wheel Drive front axles, this part replace OEM numbers CAR118526, 83952503, N13504 (Item #: 156167, Ref: CAR118526) $86.00

King Pin - For Case Construction and industrial models 580K, 580SK, 590 (Turbo), Replaces Case IH OEM number D123865, 2" Diameter, 6.630" Long, (Item #: 160533) $76.00

King Pin Repair Kit - This Kit Contains: (1) D123865 Kingpin, (1) D57486 Lock Pin, (2) D72371 Spacers, (2) A28230 Needle Bearings, (2) 10021237 Snap Rings, (1) D72372 Thrust Washer, (1) A27602 Thrust Bearing, (2) 2385139 O-Rings, (1) D61297 Seal and (2) 21989 Grease Fittings. Used on 570MXT, 580LXT, 580K, 580SK, 580L, 580M, 580SL, 580SM, 585G, 586G, 588G, 590, 590L and 590SM (Item #: 152099, Ref: D103626) $80.00

King Pin Thrust Bearing - Used on several Carraro 4WD front ends, this 2 piece bearing set replaces OEM numbers N14373, 47109506, 3523057M1, 47895578, 123726, 137700410834, 153326668, 1964243C1, 14373, 83982416, 83944349, 87523063, K395040, 87521218, 47123701, 9968002, CAR123726, CAR115714, 3541402M1, 3475530M1, 3523057M1, EQ501557, ER123726 (Item #: 156136, Ref: CAR123726) $24.40

King Pin Thrust Bushing - Used on several Carraro 4WD front ends, this bushing replaces OEM numbers CAR123641, 83982431, 9967999, 09967999, 3541400M1, N14372 (Item #: 156137, Ref: CAR123641) $34.50

Kingpin - MFWD Lower - For Case 480E, 480ELL, 480F, 480FLL, 480F, 580, 580 Super E, 580 Super E, 580 Super K, 580 Super K, 580K, 584E, 585E, 586E, 590. This part replaces OEM numbers 83952503, CAR118526, 3475348M1, 153326212, 137700410835, N13504 (Item #: 156167, Ref: 83952503) $86.00

Lock Pin - For Case Construction and industrial models 480D, 480E (s/n 17003108-later), 480LL (s/n 17003180-earlier), 580C, 580D, 580K, 580SD, 580SE, 580SK, 584D, 584E, 585D, 585E, 586D, 586E, 590 (Turbo), Replaces Case OEM number D57486, Length: 4", Thread 1/2-20 NF, (Item #: 160534) $11.50

O-Ring - For Case Construction and industrial models 480D, 480E (s/n 17003108-later), 480LL (s/n 17003108-earlier), 580C, 580D, 580K, 580SD, 580SE, 580SK, 584D, 584E, 585D, 585E, 586D, 586E, 590 (Turbo), Replaces Case OEM number 238-5139, (Item #: 160536) $1.90

Pinion Gear Pin - For Case Construction and industrial models 480D (Transmission s/n 16270319-later), 480E (LL), 480ELL, 480F (LL), 480FLL, 580D, 580K, 580SD, 580SE, Replaces Case OEM number A153711, (Item #: 126902) $28.80

Planetary Shaft, Used - For Case Construction and industrial models 480E, 480ELL, 480F, 480FLL, 580E, 580G, 580K, 580SE, 584E, 585E, 586E, 655C, 655D, 760 Replaces Case OEM number N13517, , Compatible with Case IH tractor models 5120, 5130, 5140, 5150, 5220, 5230, 5240, 5250 Replaces Case IH OEM nos N13517, , Compatible with Ford tractor models 5610, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, Compatible with Ford Construction and industrial models 250C, 260C, 340B, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 540, 540B, 545, 545A, 545C, 545D, 555, 555A, 555B, 555C, 555D, 575D, 675D, Replaces Ford OEM nos CAR1208351, 34.4mm OD x 80mm L, For a new version of this item use Item #: 157692, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 445890) $47.01

Power Steering Cylinder - Used on Case 570LXT, 570MXT, 580K, 580L, 580M, 580SK, 580 Super L, 580 Super M, 585G, 586G, 588G. For 2WD. Replaces 450563A1, G107720 (Item #: 164153, Ref: G107720) $642.00

Ring Gear and Pinion Set - For Case Construction and industrial models 480D, 480E, 480F, 580E, 580K (s/n 20, 000-earlier, 2 or 4 W/D), 580SE, 580SE (Transmission s/n 16270319), 584, 584D, 584E, 585, 585D, 585E, 586D, 586E, Replaces Case OEM number A168883, (Item #: 126884) $269.00

Roller Bearing - Used in many Four Wheel Drive Systems, this bearing measures 109.5mm (4.311 inches) inside diameter, 158.8mm (6.25 inches) outside diameter and 21.2mm (0.834 inches) wide. Replaces OEM numbers ZP0735370150, 81676C1, 84592016, 47724311, 5133737, 83952531, K395101, H1482196, CAR118370, 9967690, CAR045180, CAR142088, K395101, ZP0735370150, 83952531, 47724311, 5133737, 84592016, 6914441, 9967690, 83985020, 89967690, CAR118370, 81676C1, 05133737, 47724311, H1482196, K395101, 81676C1 (Item #: 156047, Ref: JD10249) $83.00

Shaft - For Case Construction and industrial models 480E (CK), 480ELL (CK), 480F (CK, 9/89-later), 480FLL (CK, 9/89-later), 580K (CK), 580K (CK, s/n: JJG020000-later), 580SE (CK), 584E (CK, 5/90-later), 585E (CK, 5/90-later), 586E (CK, 5/90-later), 760 (Trencher), 860 (Turbo Trencher, 2/92-later), Replaces Case OEM number N13517, 137700420859, 3475620M1, (Item #: 157692) $65.00

Spacer - For Case Construction and industrial models 480D, 480E (s/n 17003108-later), 480LL (s/n 17003108-earlier), 580C, 580D, 580K, 580SD, 580SE, 580SK, 584D, 584E, 585D, 585E, 586D, 586E, 590 (Turbo), Replaces Case OEM number D72371, (Item #: 160537) $4.50

Spindle Bushing - For Case Construction and industrial models 580, 580K, 580SK, 590 (Turbo), Replaces Case OEM number D127507, For 2 Wheel Drive Only, (Item #: 152100) $16.31

No
Picture
Steering Cylinder - For Case Construction and industrial models 580K, 580SK, 590, 590 Super L, 590 Super M, Replaces Case IH OEM number D149729, Manufactured to exact OEM specifications, Additional Handling and Oversize Fees Apply To This Item, (Item #: 158186) $495.00

Steering Link - For tractor models 570LXT, 580SK, 580SL, 580K, 580L, 590SL, 590 Turbo. (Item #: 104477, Ref: D123806) $39.00

No
Picture
Stub Axle Seal - For Case Construction and industrial models 580K, 580SK, Replaces Case OEM number 5122548, K395039, (Item #: 157675) $7.26

Thrust Washer - For Case Construction and industrial models 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 570LXT, 580C, 580D, 580K, 580L, 580SD, 580SE, 580SK, 580 Super L, 584D, 584E, 585D, 585E, 586D, 586E, 590 Super L, Replaces Case OEM number D72372, 2.012" I.D., 2.730" O.D., (Item #: 160535) $9.80

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: A22279, A30834, A42242, G45307, K964615, O10582AB, K902187, K960750 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 580K Parts] [All Case Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy