FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers U Parts

Category: Fuel System / Air Intake

[Categories] [All U Parts] [All Allis Chalmers Models]

Carburetor Kit, Comprehensive - For 6496, 6699, 6817 ZENITH Carburetor NUMBERS U1750, 2043, 2212 ALLIS CHALMERS CARB NUMBERS. For tractor models U, UC. (Item #: 112101, Ref: C520) $55.00

No
Picture
Carburetor Repair Kit, basic - 6496, 6699, 6817 ZENITH Carburetor NUMBERS U1750, 2043, 2212 ALLIS CHALMERS CARB NUMBERS For U, UC tisco complete kit is cheaper (Item #: 112101, Ref: BK20V) $55.00

Sediment Bowl Assembly - Large bowl, single inlet type. Used on; (D15 Gas serial number 9001 and up and All Diesel using 2.315 Long Glass Bowl), (D17 Gas serial number 42001 and up and all Diesel using 2.315 Long Glass Bowl), (D19 Gas serial number 12001 and up and all Diesel using 2.315 Long Glass Bowl), (D21, WD45, 170, 175, 180, 185 all 2.315 Long Glass Bowl), (U Gas only using 2.315 Long Glass Bowl and single outlet ), (UC Gas only using 2.315 Long Glass Bowl and single outlet), (190, 190XT Gas, Diesel. Using 2.315 Long Glass Bowl). Fittings are 3/8 inch pipe inlet, 1/8 inch pipe outlet, 2.315 inch tall glass bowl. Replacement bowl available as part S.65504. Replaces: 237946 and 70237946. (Item #: 105393, Ref: S.61581) $22.00

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: D15 Gas (SN: 9001 and up), and all diesel, D17 Gas (SN: 42001 and up) and all diesel, D19 Gas (SN: 12001 and up) and all diesel, D21, U, UC, WD45, 170, 175, 180, 185, 190, 190XT. Replaces 70237947V, 237947. (Item #: 105365, Ref: S.65504) $5.50

Sediment Bowl Bail with Brass Nut - For Allis Chalmers tractor models D15 (gas, s/n 9001-later), D17 (gas, s/n 42001-later), D19 (gas, s/n 12001-later), D21, U, UC, WD45, 170, 175, 180, 185, 190, 190XT Replaces Allis Chalmers OEM number 70223248, 223248, , Compatible with Case tractor models C, L (gas, 1939-earlier), LA (gas, s/n 4600027-earlier), LI (gas, 1939-earlier), 400, 410, 411, 412, 700, 730CK, 800, 840, Compatible with Case Construction and industrial models W5, W5A, W7, W8, W9, W10, 500, 680CK Replaces Case OEM number A11206, A11207, , Compatible with CockShutt / CO OP tractor models E3, E4, 20, 30, 40, 50, 540, 550 Replaces CockShutt / CO OP OEM number T07088, 12084G, , Compatible with International tractor models A, B, C, F12, F14, F20, F30, H, HV, Hydro 70, I4, I6, I9, OS4, OS6, Super C, Super M, Super MTA, Super W4, Super W6, Super W9, TD6 (s/n 29964-earlier), W12, W30, W40, 10-20, 15-30 (s/n 45513-later), 22-36, 100, 130, 140, 200, 230, 300, 340, 350, 400, 450, 460, 504, 560, 606, 656, 660, 666, 766, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 500 Replaces International OEM number 17564D, , Compatible with John Deere tractor models A (Styled and Unstyled), AI, AI (Styled and Unstyled), ANH (Styled and Unstyled), AO (Styled and Unstyled), AR, AR (Styled and Unstyled), AW, AW (Styled and Unstyled), B, B (Styled and Unstyled), BN (Styled and Unstyled), BNH (Styled and Unstyled), BO (Styled and Unstyled), BR (Styled and Unstyled), BWH (Styled and Unstyled), D (Styled and Unstyled), G, G (Styled and Unstyled), GH, GH (Styled and Unstyled), GM, GM (Styled and Unstyled), GN, GN (Styled and Unstyled), GW, GW (Styled and Unstyled), H, HNH, HWH, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2010, 4030, 4230, Compatible with John Deere Combine (s) 45, 55, 95, 105, 3300, 4400, 6600, 6602, 7700 Replaces John Deere OEM number AA517R, , Compatible with Massey Ferguson tractor models Super 90 (s/n 888673-earlier), 50 (s/n 536843-later), 65, 85 (s/n 807752-later), 135, 150, 165, 175, 180, Compatible with Massey Ferguson Construction and industrial models 20, 30, 50, 202, 204, 302 (s/n 119701046-later), 304 (s/n 119751024-later), 356, 2135, 3165 Replaces Massey Ferguson OEM number 505472M91, 1018079M91, , Compatible with Massey Harris tractor models Colt, Mustang, 20, 22, 30, 44, 55, 81, 82, 101, 102, 303, 333, 555 Replaces Massey Harris OEM number 12084G, , Compatible with Minneapolis Moline tractor models G, G707, G708, GB, GTA, GTB, GTC, R (s/n 404800-earlier), RTN (s/n 404800-earlier), RTU (s/n 404800-earlier), U (s/n 544001-later), U, UB, UB (Special), UDLX, UT (s/n 317400), UT, UTS (s/n 317400), UTS, Z (s/n 571686-earlier), ZAS (late, s/n 701911-later), ZB (late), ZBE (late), ZBN (late), ZBU (late), ZTU (s/n 611511-earlier), Compatible with Oliver tractor models Super 66, Super 99, 60, 66, 70, 80, 90, 99, 660, 950, Compatible with Oliver Construction and industrial models HG, OC3, Replaces Oliver OEM number BS5305A, CS5305A, Replaces White OEM number 1BS-5305A, O.D. 2-1/8", Length 2.970", (Item #: 126520) $10.60

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 208325, 208363, 70208325, 70208363 (Item #: 105364, Ref: 49923D) $3.50

Universal Parts and Accessories
Category: Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Item #: 178125, Ref: CC72) $19.50

No
Picture
Choke Cable Swivel - Choke cable swivel attaches the choke inner cable to the choke lever. Used on tractors with a choke cable. (Item #: 184016, Ref: CT28-49) $15.76

Engine Heater, Tank Type - 1500 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 30-40 quart capacity liquid cooled engines. (Item #: 107378, Ref: GE1500) $109.00

$Allis Chalmers U Fuel Filter Kit, In-Line, 5\16 inch$
Fuel Filter Kit, In-Line, 5/16 inch - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. Contains: Filter, 2 - hoses, 4 - clamps. (Item #: 119295, Ref: BF840) $6.30

$Allis Chalmers U Fuel Filter, In-Line, 1\4 inch$
Fuel Filter, In-Line, 1/4 inch - Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Item #: 119294, Ref: 6511393) $7.60

$Allis Chalmers U Fuel Filter, In-Line, 3\8 inch$
Fuel Filter, In-Line, 3/8 inch - Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Item #: 120082, Ref: BF836) $6.80

$Allis Chalmers U Fuel Filter, In-Line, 5\16 inch, Clear$
Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Item #: 110863, Ref: BF7736) $4.80

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Item #: 107976, Ref: R2043) $71.00

Fuel Tank Liner Kit - Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Item #: 112528, Ref: NR1259) $109.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Item #: 114940, Ref: R7949) $9.92

Fuel Tank Webbing, 3 Ft - Black woven nylon type material measures .042 inches thick, 15/16 inches wide and 3 foot section. (Item #: 178009, Ref: FTW494) $5.40

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Item #: 180786, Ref: LU10003) $13.30

Main Load Adjusting Needle Assembly - Used on Marvel Schebler carburetors TSX181, TSX221, TSX245, TSX332, TSX360, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX633, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX797, TSX97, this part replaces OEM numbers 10P70, 43-613, 43-622, 43-678, 43-699, RE9051. Verify your carburetor is among those listed before ordering. (Item #: 111767, Ref: CT43-622) $52.00

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2 inch pipe inside diameter, 6 inch bowl and is 11-1/2 inches tall. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185438, Ref: S66397) $20.20

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2.25 inch pipe inside diameter, 7 inch bowl and is 9-1/2 pipe. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185439, Ref: C0NN9A660A) $33.30

Pre Cleaner Assembly, Turbo 2-3 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 51, 57, 64, 71, 76mm (2-3 inch) with multiple adapters. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC23) $94.68

Pre Cleaner Assembly, Turbo 5 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 5 inch pipe. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC5) $137.82

$Allis Chalmers U Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Item #: 109399, Ref: PTSTOP) $10.80

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Fuel System / Air Intake

[Categories] [All U Parts] [All Allis Chalmers Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy