FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers H3 Parts

Category: Clutch

[Categories] [All H3 Parts] [All Allis Chalmers Models]

Clutch Disc, 9 inch Organic - Clutch disc is 9 inches in diameter with 10 splines on a 1 1/8 inch hub. Replaces 207784 and 70207784. For models B, C, CA, D10, D12, D14, D15, H3, HD3, I400, I600 and IB. This part is not interchangeable with 70232239 as the hubs are different. (Item #: 119397, Ref: A44512) $59.00

Clutch Pilot Bushing - Inside diameter .883 inch, outside diameter 1.125 inch, thickness .995 inch. For the following models: B, IB, C, CA, D10 (up to serial number 3501), D12 (up to serial number 3001), D14, D15, and H3. Replaces 206968, 228188, 228255, 70206968, 70228188, 70228255. (Item #: 122000, Ref: 364527R91) $9.30

Pressure Plate - 9 inch diameter. For tractor models D10 and D12 serial number 3502 and up, D14, D15, (H3 with 149 engine), HD3. (Item #: 118719, Ref: 70247745) $88.00

Release bearing - For tractor models 180, 185, 190, 190XT, 200, C, CA, D10 (serial number 3501 and below), D12 (serial number 3001 and below), D14, D15, D17 (serial number 75000 and below), D19, H3 (with 149 engine). Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces: 211273, 235079, 70211273, 70235079. (Item #: 107007, Ref: N1087) $20.20

Universal Parts and Accessories
Category: Clutch

Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $2039.01

Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1084.94

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories] [All H3 Parts] [All Allis Chalmers Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy