FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers D19 Parts

[Categories] [All Allis Chalmers Models] [Print]

Brakes

No
Picture
Actuating Drum Assembly, Used - For Allis Chalmers tractor models D19, 190, 190XT, Compatible with Allis Chalmers Harvester(s) 880 Replaces Allis Chalmers OEM number 70235603, , Compatible with Gleaner Combine(s) C, F2 (s/n 588-36201), F3 (s/n 588-36201), G (s/n 17001-earlier), Replaces Gleaner OEM nos 70235603, For a new version of this item use Item #: 173470, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437600) $84.01

No
Picture
Brake Backing Plate, Used - For Allis Chalmers tractor models D19, 190, 190XT, Replaces Allis Chalmers OEM nos 70235607, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454139) $151.01

Brake Band - Sold individually, 4 required per tractor. For tractor models 170, 175, 180, 185, 190, 190XT, 190XT III, (200 serial number less than 4000), (D17 serial number 42001 and above), D19, D21. Also replaces 70276940, 70235610, 70277438. (Item #: 105398, Ref: 70277379) $32.20

Brake Band Return Spring - For Allis Chalmers tractor models D19, 190, 190XT, 200, Replaces Allis Chalmers OEM number 70250446, 0.063" Wire Diameter, 0.369" to 0.497" O.D., 1.293" O/A Length, (Item #: 164313) $6.40

Brake Drum - Also replaces 70235603. For tractor models 880 Cotton Picker, D19, 190 serial number before 21700, 190XT before serial number 21700. (Item #: 173470, Ref: 70277329) $159.00

Brake Lining - Lining kit for disc brakes. Includes lining and rivets for one disc and one drum. Prior to serial number 21699. For 190, 190XT, D19, F, F2, L. 70252562, 70277200. (Item #: 105400, Ref: 70235628) $28.60

Brake Shoe Linings with Rivets - Set of 2 brake shoe linings with rivets for one wheel. For 170, 180, 185, 190, D17 after serial number 42000, D19, D21. (Item #: 105404, Ref: BLKAD17) $28.70

Brake Shoe Spring - Diameter of wire is 0.088 of an inch, outside diameter is 0.525-0.666 of an inch, and has an overall length of 1.389 inches. 4 used per tractor, sold individually. For the following models: D17 (serial number 42001 and up), D19, D21, 170, 175, 180, 185, 190, 190XT, 200 (up to serial number 4000). Replaces 235609, 250435, and 70250435. (Item #: 162368, Ref: G48508) $7.40

Front Brake Spring - Fits tractor models D17 (up to serial number 42000), D19 (also used as a hydraulic oil control spring on D19 up to serial number 12850.), WD, WD45; Replaces: 70232564, 70222500, 232564, 222500. 3.1354 inch overall length, .595 inch outside diameter, .081 inch wire diameter. Two used per tractor. Sold individually. (Item #: 126497, Ref: 70232564) $6.10

Clutch

Clutch Disc - This Remanufactured 11 inch diameter, woven, 1-1/4 inch hub, 10 spline. For tractor models D17, D19, 170, 175. (Item #: 70241255) $184.96

Clutch Disc, Remanufactured, 70232241 - For Allis Chalmers tractor models D17 (Series IV s/n 75000-later), D19, 170, 175, Replaces Allis Chalmers OEM number 70232241, 70232870, 70232912, 70247859, Clutch Size: 11", Clutch Hub: 1-1/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, (Item #: 203372) $105.00

Clutch Disc, Remanufactured, 70232241 - For Allis Chalmers tractor models D17 (Series IV s/n 75000-later), D19, 170, 175, Replaces Allis Chalmers OEM number 70232241, 70232870, 70232912, 70247859, Clutch Size: 11", Clutch Hub: 1-1/4", Clutch Splines: 10, Clutch Center: Spring, Clutch Type: 4 Pads, For a New version of this sku use Item #: 172938, (Item #: 203377) $112.50

Clutch Disc, Remanufactured, 70232241 - For Allis Chalmers tractor models D17 (s/n 75000 - earlier), D19, 170, 175, Replaces Allis Chalmers OEM number 70232241, 70232870, 70232912, 70247859, Clutch Size: 11", Clutch Hub: 1-1/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 206309) $175.50

No
Picture
Clutch Hub, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70235678, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442347) $140.01

Clutch Inspection Plate - Fits B, C, CA, IB, D10, D12, D17, D19, WC, WF, 160, 170, 175. (Item #: 126139, Ref: 208465) $24.40

Clutch Plate - For Allis Chalmers tractor models D14, D15, D17 (Prior to Series IV), D17 (Series IV), D19, D21, 170, 175, 180 (s/n 12800-earlier), 185 (s/n 12800-earlier), 185 (s/n 12800-later), 190, 190XT, 200, Replaces Allis Chalmers OEM number 70257913, Plate / Circular, (Item #: 169710) $172.00

Clutch Release Throw Out Bearing - Greaseable - Compatible with Allis Chalmers Construction & Industrial(s) HD3, HD4. Compatible with Allis Chalmers Tractor(s) B, C, CA, D10, D12, D14, D15, D17, D19, 180, 185, 190, 190XT, 200. Replaces Allis Chalmers OEM nos 70235079 (Item #: 113482) $18.10

No
Picture
Cover Assembly - For Allis Chalmers tractor models D19, 170, 175, Replaces Allis Chalmers OEM number 70247860, (Item #: 166217) $238.00

Pilot Bearing - Clutch pilot bearing. For tractor models 170, 180, 190, D17, D19, D21, WD45. (Item #: 100023, Ref: 70527813) $5.80

Power Director Clutch Plate - For tractor models D14, D15, D17, D19, 170, 175. (Item #: 168848, Ref: 70230015) $168.00

Power Director Clutch Plate - Used on Allis Chalmers D15, D17, D19, D21, 170, 175 below serial number 5461, 180 below serial number 12800, 185 below serial number 12800, 190, 190XT, 190XT Series III, 200, and 7000. Replaces OEM numbers 70257672, 70261212 (Item #: 151816, Ref: 70261212) $42.40

Pressure Plate Assembly, Remanufactured, 70241253 - For Allis Chalmers tractor models D19, 170, 175, Replaces Allis Chalmers OEM number 70241253, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 173131, (Item #: 204580) $219.26

No
Picture
Pressure Plate, 11 inch without Hub - For tractor models 170, 175, D19. (Item #: 173131, Ref: 70241253) $366.00

Release Bearing - For tractors: B, IB, WC, WF, WD, WD45, WD45D, D10 (serial number 3501 and up), D12 (serial number 3001 and up), D17 (prior to serial number 75000), D19. Measures inside Diameter 2.062 inches and Outside Diameter 3.375 inches.Replaces 70204829 (Item #: 100022, Ref: 361292R91) $26.20

Release bearing - For tractor models 180, 185, 190, 190XT, 200, C, CA, D10 (serial number 3501 and below), D12 (serial number 3001 and below), D14, D15, D17 (serial number 75000 and below), D19, H3 (with 149 engine). Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces: 211273, 235079, 70211273, 70235079. (Item #: 107007, Ref: N1087) $20.20

Cooling System

Belt - This Fan Belt measures 1/2 inch wide and 48 5/8 inches long. For Diesel models 170, A, A2, C, D19, WD45. Verify measurements before ordering. (Item #: 123127, Ref: 378113R2) $7.20

Cooling Fan - 4 Blade, Used - For Allis Chalmers tractor models D17, D19, WC, WD, WD45, Replaces Allis Chalmers OEM number 70235753, 70240973, 227308, 240973, 4 metal blades, 16-7/8" O.D., 3-7/8" blade width, 1-1/8" pilot hole, 1-3/4" bolt holes center to center, 5/16" bolt hole diameter, For a new version of this item use Item #: 100767, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435276) $14.91

Fan Blade - Fan Blade For WC, WD, WD45, D17, D19. Four Blade. (0566R) (Item #: 100767, Ref: 70235753) $29.60

Fan Blade, 5 Blade - 17-1/2 inch diameter, 1-1/16 inch pilot hole, mounting holes on 1-1/4 inch centers. For tractor models (170, 175 gas), (D17, D19, WD45 gas or diesel), WC, WF. (Item #: 173464, Ref: 70240973) $93.00

Radiator Cap - Allis Chalmers, 228545, 228722, A39359, A45176, G45179 - For Allis Chalmers tractor models B (s/n 61221-later), C (s/n 18580-later), CA, D10, D12, D14, D15, D17, D19, D21, G, WC (s/n 74430-later), WD, WD45, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, Compatible with Allis Chalmers Construction and industrial models H3, HD3, I40, I60, I400, I600 Replaces Allis Chalmers OEM number 70228545, 70228722, 70228817, 70254891, , Compatible with Case Construction and industrial models W3, 210B, 310, 320, 430, 430CK, 480, 480B, 480C, 480CK, 530, 530CK, 545, 580, 580B, 580BCK, 580C, 580CK, 584, 584C, 585, 585C, 586, 586C, Replaces Case OEM number A39359, A45176, G45179, Chrome Plated, 2.239" Inner cap I.D, 2.895" Outer cap shell O.D., 0.582" Tang width, 1.485" I.D. sealing area, 4 PSI (for pressurized systems), (Item #: 113099) $26.30

Radiator Cap, Pressurized - This 4 pound pressurized cap is for tractor models using a pressurized cap: Late B, C, CA, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 70228545, 70228722, 70228817, 70254891. (Item #: 110011, Ref: 70254891) $7.20

Radiator Hose, Lower - A = 1.50 inch, B = 1.750 inch. For model s: (D17 diesel serial number 38964 and up), (D19 gas). (Item #: 159541, Ref: 70235356) $16.80

Radiator Hose, Lower - A = 1.562 inches, B = 1.812 inches. For model D19 diesel. (Item #: 159545, Ref: 70236836) $23.30

Radiator Hose, Upper - Our new upper radiator hose has an inside diameter of 1.750 inches. For tractor models (D17 diesel serial number 38964 and up), (D19 diesel with 4-15/16 inch filler neck). (Item #: 159542, Ref: 70235361) $17.40

Radiator Hose, Upper - Our new upper radiator hose has an inside diameter of 1.750 inches. For model D19 with gas engine. (Item #: 159544, Ref: 70236594) $14.50

Thermostat - For tractor models 180, 185, 190, 190XT, 190XT III, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 860, 880, (D17 serial number 119938 and up), (D19 diesel), D21. Replaces 74025103. (Item #: 113939, Ref: EAF8575BWG) $14.00

Water Pump - Water Pump less Hub and Pulley. Fits water pumps with casting number L126627. Casting number for gas 134445) For models A Combine, D19 (diesel and late gas). Replaces 134445, 74512213, 74516962, 74517363 (Item #: 122787, Ref: 74517363) $126.00

Water Pump - 4.938 inch filler neck. For tractor models (D17 series III diesel), (D19 gas and LP). Replaces 4516959, 74516959, 74517362, 134680, 7451729 (Item #: 104191, Ref: 74517362) $158.00

Water Pump Gasket - For Allis Chalmers tractor models D19, D21, 210, 220, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 74029327, For water pump use 100040, (Item #: 153396) $3.20

Water Pump Gasket - Pump to Block - For Allis Chalmers tractor models D17 (Series 3 Diesel), D19 (Gas and LP), Replaces Allis Chalmers OEM number 74512212, (Item #: 162541) $7.20

Water Pump Gasket - Pump to Plate - For Allis Chalmers tractor models D17 (Diesel, Series III), D19 (Gas and LP), Replaces Allis Chalmers OEM number 74512144, Pump to Plate, For Pump to Block Gasket use Item #: 104191, (Item #: 163702) $3.90

Water Pump Gasket, Outlet - For Allis Chalmers tractor models D19, D21, 170, 175, 180, 185, 190, 200, 210, 220, 7000, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 740251062, For water pump use 100039, (Item #: 153403) $2.30

Water Pump Gasket, Pump to Plate - For Allis Chalmers tractor models D19, D21, 170, 175, 180, 185, 190, 200, 210, 220, 7000, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 74026887, Pump to Plate, For water pump use 100039, (Item #: 153402) $9.80

Water Pump O-Ring - For Allis Chalmers tractor models D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70923971, For water pump use 100040, (Item #: 153397) $1.90

Water Pump Pulley - This pulley is for tractor models (D17 series III with diesel engine), D19. (Item #: 172965, Ref: 74513381) $67.00

Decals and Emblems

No
Picture
Decal Set - Vinyl Cut, Complete - Vinyl Cut, Complete. For Model: D19D (Diesel Engine) (Item #: 100192, Ref: R2432V) $470.00

Decal Set, Vinyl Cut - Decal Set for Allis Chalmers Model D19. (Item #: 100192, Ref: R1873) $470.00

$Allis Chalmers D19 Decal, 2-1\2 inch Diamond, Blue Background, Mylar$
Decal, 2-1/2" Diamond, Blue Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 2-1/2" Blue Background, Mylar decal, (Item #: 100149) $3.50

$Allis Chalmers D19 Decal, 2-1\2 inch Diamond, Orange Background, Mylar$
Decal, 2-1/2" Diamond, Orange Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 2-1/2" with Orange Background, Mylar decal, (Item #: 100148) $3.50

Decal, 6" Diamond, Blue Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Blue Background, Mylar decal, (Item #: 100147) $5.30

Decal, 6" Diamond, Orange Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Orange Background, Mylar decal, (Item #: 100146) $5.30

Decal, Black with Long A&S, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, Black lettering with long A and S, 22-1/4" Long, Mylar decal, (Item #: 100142) $8.80

No
Picture
Decal, Blue with Border, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers w/Border, Blue, Mylar decal, (Item #: 100145) $8.80

Decal, Blue with Long A&S, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, W/O Border, Long A&S, Blue, Mylar decal, (Item #: 100143) $8.80

$Allis Chalmers D19 Decal, Triangle, Black and Orange with White Background, 1-1\2 inch x 1-1\2 inch, Mylar$
Decal, Triangle, Black and Orange with White Background, 1-1/2" x 1-1/2", Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, 1 1/2" x 1 1/2", Black and orange on white background, Mylar decal, (Item #: 100162) $2.70

Diamond Decal, 6" Clear, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Clear Background, Mylar decal, (Item #: 100173) $5.30

Emblem, Cream on Chrome Diamond - For Allis Chalmers tractor models D10, D12 (1951-later), D14 (s/n 19001-later), D15, D17 (s/n 24001-later), D19, D21 (1965-earlier), ED40 (Grille emblem only) Replaces Allis Chalmers OEM number 70233852, 233852, , Compatible with Gleaner Combine (s) C, E, E3, F, K, Fits steering wheels or grilles, Chromed emblem with cream enameled background using AC starburst, Cream Steering Wheel use Item #: 101408, (Item #: 101409) $35.00

Emblem, Orange on Chrome Diamond - For Allis Chalmers tractor models D10, D12, D14, D15, D17, D19, D21, ED40 Replaces Allis Chalmers OEM number 70228474, , Compatible with Gleaner Combine (s) A2, C, E, E3, F, Chromed emblem with orange enameled background using AC starburst, Fits steering wheels or grilles, A/C Orange Steering Wheel Spinner use Item #: 101409, (Item #: 101408) $31.50

Drive Train

Control Lever Knob - Three knobs used per tractor. Fits D10, D12, D14, D15, D17, D19. Also Replaces 70228215. (Item #: 115352, Ref: 228215) $5.30

Gear Shift Boot - For tractor models D17, D19, 170, 175, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Item #: 115401, Ref: 233767) $9.70

Gear Shift Knob - This Gear Shift Knob has a 0.400 inch inside diameter hole. Fits B, C, WD, WD45, D10, D12, D14, D15, D17, D19, D21. Replaces: 226023, 70226023 (Item #: 121931, Ref: 226023) $6.80

No
Picture
Idler Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70231942, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454696) $100.01

No
Picture
Idler Shaft, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70231939, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453931) $50.01

Input Shaft - This Input Shaft is for tractor models D17, D19, 170, 175. Transmission Input Shaft is 21 - 20 - 8 Tooth. 9.92 inches in total length. (Item #: 174273, Ref: 70239530) $219.00

No
Picture
Reverse Idler Shaft, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70232836, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453945) $83.01

Third Gear - For tractor models D17 serial number 24001 to 71326, D19 up to serial number 15151, 170, 175. Third Gear has 27/8 Teeth. VERIFY TOOTH COUNT. (Item #: 172763, Ref: 70240940) $285.00

Third and Fourth Gear Coupling - For D17, D19, 170, 175, (WD, WD45 both serial number 127007 and up). Third and Fourth Gear Coupling (Item #: 172618, Ref: 70232452) $140.00

Electrical System

Distributor Cap - Distributor cap. For D19. Also fits (Combines A, C, CII, F With Delco 1112461, 1112601, 1112655), (Industrials TL14, TL14A) (Cotton Pickers 622, 801, 802) Replaces: 4042704, 9001153, 74042704, 79001153, 812627, 824735, 825409, 1867722, 1889361, 1911597, 12338674, D301, D301A, D320 (Item #: 104557, Ref: 21A443) $10.50

No
Picture
Distributor Dust Cover - Cover includes gasket, felt, and washer. For CA, D10, D12, D14, D15, D17, D19, WD, WD45. (Item #: 103153, Ref: 70225734) $9.70

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models B, IB, C, G, CA, WD, WD45, WC, WF, D10, D12, D14, D15, D17, D19, RC. Replaces 225734 and 70225734. (Item #: 103153, Ref: 1900119) $9.70

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits tractor models B, C, IB, RC, WC, WD, WF, CA, D10, D12, D14, D17, D19, G, WD45, D15, H3, I40, I400, I500, I60, I600. With 1112461, 1112601, 1112655 1111411 or 1112607 Delco Distributor and Clip Held Cap. Replaces: bushing: 225773, 70225773, 0.005 inch shim washer: 225797, 70225797, 0.034 inch washer: 250977, 70250977, 0.010 inch shim washer: 4050123, 74050123. (Item #: 178103, Ref: ABC3007) $29.30

Distributor Terminal Insulator Assembly, Delco - This Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Fits Allis Chalmers with Delco 1112461, 1112601, 1112655, 1111411, 1112607, 1112609. Replaces: 225791, 225792, 225793, 225794, 225795, 70225791, 70225792, 70225793, 70225794, 70225795 (Item #: 111468, Ref: 1904376) $14.80

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - Replaces points and condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fuel economy. For 12 Volt Negative Ground systems only. For Delco 1112624, 1112466, 1112682, 1112687. Tractor models D19, 180, 185, 190 and 190XT. (Item #: 105074, Ref: 1163A) $134.00

No
Picture
Electronic Ignition Conversion Kit, 12 volt negative ground - 12 VOLT NEGATIVE Ground. For Tractor Model D19. For the following Delco Distributors: 1111702, 1111750, 1112579, 1111731, 1112561, 1112588, 1112587, 1112603, 1112632, 1112615. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on 12 VOLT NEGATIVE ground system. (Item #: 105076, Ref: 1168LS) $155.00

Fuse Holder - Mounts on 5/8 inch diameter hole. 2 spade connectors. Replaces 230246, 70230246 (Item #: 112273, Ref: 376852R91) $10.40

No
Picture
Generator, Delco Type, 12 Volt - For tractor models D, D10, D12, D14, D15, D17, D19, DD, H3, HD3, RT40. Replaces Delco part number 1100305. Remanufactured. Refundable $25.00 core charge will be added to your order. (Item #: 203181, Ref: TG-59) $370.72

Ignition Kit, Delco Clip-Held Cap Distributor - Ignition kit for a Delco distributor with CLIP held cap. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. Contains points, condenser, and rotor. For: A, B, CA, G, WD, WD45, D10, D12, D14, D15, D17, D19, C, E, F, 60, 66, 72, 90, WF, I40, I400, I500, I60, I600, H3. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1112593, 1111708. (Item #: 103151, Ref: ATK1DCR) $10.30

Key Switch - 5 terminal, with keys and jam nut. For tractor models D10, D12, (D14 from serial number 9500 and up), (D15 up to serial number 9000), (D17 up to serial number 75000), D19, D21. Replaces 235785, 231705, 233320, 229201, 234356 70235785, 70231705, 70233320, 70229201, 70234356. (Item #: 115836, Ref: 230163) $38.50

Rotor - Used with Delco distributors 1111411 1112607, and 1112609 with a clip held cap. For tractor models: B, IB, C, CA, G, D10, D12, D14, D15, D17, D19, H3, RC, WC, WD, WD45, I400, WF, I500, I600. Replaces 1921285, 225736, and 70225736. (Item #: 110177, Ref: 1750498M1) $3.80

Solenoid, 12 Volt - This is a 3 Post 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. For tractor models D10, D12, D14, D15, (D17, D19, 170, 180 with 1107695 starter) D21 all with gas engines and Delco starters. Replaces Delco DR1467, OEM 237136, 233296, 70237136, 910687. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.20

Spark Plug Wire Set - 6 Cylinder - Carbon Core - 90 Degree Boots - For Allis Chalmers tractor models D19, 180, 185, 190, 190XT, Compatible with Ford tractor models 6000, Compatible with International tractor models 460, 560, 606, 656, 660, 706, 756, 806, 826, 856, 2606, 2656, 2706, 2806, 2856, Compatible with John Deere tractor models 4010, 4020, Compatible with Massey Ferguson tractor models 1100, Compatible with Minneapolis Moline tractor models G705, G706, G707, G708, G900, G1000, GVI, Compatible with Oliver tractor models 70, 77, 88, 770, 880, 950, 1600, 1800, 2055, 2155, 2655, Fits 6 cylinder tractors, Made with carbon impregnated core to suppress radio static and designed to handle the high voltage of electronic ignition systems, For use with agricultural and off-road vehicles, (Item #: 108071) $19.30

Starter - Delco Style DD (3727), Remanufactured, Delco Remy, 1113152 - For Allis Chalmers tractor models D17, D19, Replaces Delco Remy manufacturer number 1113152, Replaces manufacturer number 3727, 140-060, 91-01-3947, Delco Style: Direct Drive, Voltage: 12, Rotation: Clockwise, Teeth: 10, (Item #: 203409) $705.58

Starter Drive - New Starter Drive - (This is not a complete starter, just the drive gear assembly) D17, D19 (models 1959 and later using 1107235 or 1107695). Replaces SPL5000, 1922266, YTO 70231310, 231310 (Item #: 113968, Ref: 70231310) $33.90

No
Picture
Starter, Rebuilt - For model D19 from 1961 to 1965 with gas engine. Additional $150.00 core charge will be added to your order. (Item #: 203461, Ref: 1107235) $400.18

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch, number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch and manifold heater switch. Replaces: 227029, 240962, 242988, 245866, 245936, 253322, 70253322, 71191589, 72160068. (Item #: 121141, Ref: R7994) $13.40

Voltage Regulator - 12-volt, using Delco generator 1100305 (VR1817). Also gas or diesel using Delco generators 1100345, 1100426. For D10, D12, D14, D15, D17, D19. The Three Post side of this regulator may be parallel or slightly splayed. Replaces Allis Chalmers Numbers; 229484, 236680, 70229484, 70236680 Delco Numbers; 1118381, 1118779, 1118977, 1118981, 1118987, 1118993, 1118997, 1118999, 1119191, 1119576 (Item #: 105581, Ref: 182548M92) $25.00

Voltage Regulator, 12 Volt - 12 Volt - 4 Terminal - Flat Mount. For model D19 with gas engine SN# up to 14698. (Item #: 105287, Ref: 220484) $30.10

No
Picture
Wiring Harness Kit - This is a complete Wiring Harness Kit for Allis Chalmers; D17 diesel serial number 75001 and up, and D19 Diesel. This is an original style harness. (Item #: R6431) $281.52

Engine Bearings

No
Picture
Bearing Retainer, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70235252, Replaces Allis Chalmers Casting nos AM4984, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454138) $40.01

No
Picture
Cam Bearing, Set - For tractors: D15 Diesel, D17 Diesel, WD45 Diesel, D19 gas and diesel. (Item #: 172498, Ref: 74514023) $47.00

Connecting Rod Bearing - .030" Oversize - Journal - For Allis Chalmers tractor models D15 (Diesel), D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel), Compatible with Allis Chalmers Construction and industrial models AT40, AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F30, F40, F50, F50 (Diesel), F60, F70, F80, F100, F120, FD30, FD40, FD50, FD60, FD70, FD80, FD100, FD120, FDX30 (Diesel), FDX40 (Diesel), FDX50 (Diesel), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP40 (Gas), FP50 (Gas), FP60 (Gas), FP70 (Gas), FP80 (Gas), HD3, TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel), Compatible with Allis Chalmers Engine (s) 153 (Gas), 175 (Diesel), 230 (Diesel), 230 (Gas), 262 (Diesel), 262 (Gas), Replaces Allis Chalmers OEM number 74517335, D4517335, Bearing size: .030" oversize, Sold per journal, For Standard connecting rod bearing use Item #: 105919, (Item #: 105918) $27.10

Connecting Rod Bearing - .040" Oversize - Journal - For Allis Chalmers tractor models D15 (Diesel), D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel), Compatible with Allis Chalmers Construction and industrial models AT40, AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F30, F40, F50, F50 (Diesel), F60, F70, F80, F100, F120, FD30, FD40, FD50, FD60, FD70, FD80, FD100, FD120, FDX30 (Diesel), FDX40 (Diesel), FDX50 (Diesel), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP40 (Gas), FP50 (Gas), FP60 (Gas), FP70 (Gas), FP80 (Gas), HD3, TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel), Compatible with Allis Chalmers Engine (s) 153 (Gas), 175 (Diesel), 230 (Diesel), 230 (Gas), 262 (Diesel), 262 (Gas), Bearing size: .040" oversize, Sold per journal, For Standard connecting rod bearing use Item #: 105918, (Item #: 105919) $28.90

No
Picture
Main Bearing Set - For diesels WD45, D17, D19 with 6BD23 and DA262 6-cylinder engines. Available in standard, .010 or .020. Specify size when ordering. (Item #: 105931, Ref: MBK-D17D7) $216.00

No
Picture
Main Bearings - .020" Oversize - Set - For Allis Chalmers tractor models D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel), Compatible with Allis Chalmers Construction and industrial models AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F60 (Diesel or Gas), F70 (Diesel or Gas), F80 (Diesel or Gas), F100 (Diesel or Gas), F120 (Diesel or Gas), FD60 (Diesel or Gas), FD70 (Diesel or Gas), FD80 (Diesel or Gas), FD100 (Diesel or Gas), FD120 (Diesel or Gas), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP60 (Gas), FP70 (Gas), FP80 (Gas), TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel), Compatible with Allis Chalmers Engine (s) 230 (Gas or Diesel), 262 (Gas or Diesel), Bearing size: .020" oversize, Sold in complete sets, For Standard main bearing use Item #: 105935, (Item #: 105933) $289.00

Main Bearings - .030" Oversize - Set - For Allis Chalmers tractor models D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel), Compatible with Allis Chalmers Construction and industrial models AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F60 (Diesel or Gas), F70 (Diesel or Gas), F80 (Diesel or Gas), F100 (Diesel or Gas), F120 (Diesel or Gas), FD60 (Diesel or Gas), FD70 (Diesel or Gas), FD80 (Diesel or Gas), FD100 (Diesel or Gas), FD120 (Diesel or Gas), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP60 (Gas), FP70 (Gas), FP80 (Gas), TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel), Compatible with Allis Chalmers Engine (s) 230 (Gas or Diesel), 262 (Gas or Diesel), Bearing size: .030" oversize, Sold in complete sets, For Standard main bearing use Item #: 105935, (Item #: 105934) $289.00

Main Bearings - .040" Oversize - Set - For Allis Chalmers tractor models D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel), Compatible with Allis Chalmers Construction and industrial models AT60 (Gas), AT70 (Gas), AT80 (Gas), AT100 (Gas), AT120 (Gas), F60 (Diesel or Gas), F70 (Diesel or Gas), F80 (Diesel or Gas), F100 (Diesel or Gas), F120 (Diesel or Gas), FD60 (Diesel or Gas), FD70 (Diesel or Gas), FD80 (Diesel or Gas), FD100 (Diesel or Gas), FD120 (Diesel or Gas), FL60 (Diesel), FL70 (Diesel), FL80 (Diesel), FL100 (Diesel), FL120 (Diesel), FP60 (Gas), FP70 (Gas), FP80 (Gas), TL10 (Diesel), TL11 (Diesel), TL12 (Diesel), TL14 (Diesel), Compatible with Allis Chalmers Engine (s) 230 (Gas or Diesel), 262 (Gas or Diesel), Bearing size: .040" oversize, Sold in complete sets, For Standard main bearing use Item #: 105934, (Item #: 105935) $295.00

Power Director Clutch Plate, Used - For Allis Chalmers tractor models D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 7000, Replaces Allis Chalmers OEM number 70257672, 70261212, 7" O.D., 3.89" I.D., 32 Tooth, For a new version of this item use Item #: 151816, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436045) $30.01

No
Picture
Rod Bearing Set, .010 - Connecting rod bearing set. .010 inch. For tractor models CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder engine. (Item #: 184349, Ref: CRK-D17D6-010) $122.00

Rod Bearing, .010 - Single rod bearing. For model D15 (Diesel), D17 (Diesel), D19 (Diesel), D19 (Gas), WD45 (Diesel) (Item #: 105916, Ref: 74517333) $15.00

No
Picture
Rod Bearing, .020 - Connecting rod bearing for one rod. 0.020 inch over. For tractors: CA, WD45D, D17D, D19D with 6BD23, DA262, 6 cylinder Diesel engine. Replaces 74517334, 4517334 (Item #: 105917, Ref: CRK-D17D6-020) $18.70

Engine Gaskets

No
Picture
Crankshaft Rear Main Seal - With Press-on Oil Seal Retainer For D19 with 262 Gas Engine. YTO-SS48048 (Item #: 105926, Ref: SS48048) $95.00

Front Crankshaft Seal - For Allis Chalmers tractor models D15, D17, D19, WD45, Compatible with Allis Chalmers Construction and industrial models AT40, AT60, AT70, AT80, AT100, AT120, F30, F40, F50, F60, F70, F80, F100, F120, FD30, FD40, FD50, FD100, FD120, FDX30, FDX40, FDX50, FL60, FL70, FL80, FL100, FL120, FP40, FP50, FP60, FP70, FP80, HD3, TL10, TL11, TL12, TL14, Compatible with Allis Chalmers Engine (s) 153, 175, 230, 262, Replaces Allis Chalmers OEM number 74513621, (Item #: 105925) $14.60

No
Picture
Full Gasket Set - With Press-on Oil Seal Retainer. For D19 with 262 Gas Engine. (Item #: 105939, Ref: FS3300VC) $418.00

No
Picture
Head Gasket Set - For model D19 with 262 Gas Engine. (Item #: 105940, Ref: HS3300VC) $149.00

Oil Pan Gasket - For Allis Chalmers tractor models D17, D19, WD45, Compatible with Allis Chalmers Construction and industrial models AT60, AT70, AT80, AT100, AT120, F60, F70, F80, F100, F120, FD60, FD70, FD80, FD100, FD120, FL60, FL70, FL80, FL100, FL120, FP60, FP70, FP80, TL10, TL11, TL12, TL14, Compatible with Allis Chalmers Engine (s) 230 (gas and diesel), 262 (gas and diesel), 262 (turbo diesel), Compatible with Gleaner Combine (s) F, Oil Pan Gasket Only, (Item #: 105938) $17.80

Engine Rebuild Kits

Valve Train Kit - For Allis Chalmers tractor model D19 (With G262 Engine), Replaces manufacturer number 474512120, 474513115, 474512172, 474513700, 474512121, 742026D, (Item #: 120232) $290.40

Engine Parts

No
Picture
Bare Block, Remanufactured, 74514963 - For Allis Chalmers tractor model D19 (diesel), Replaces Allis Chalmers OEM number 74514963, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 207257) $1225.01

No
Picture
Clutch Center Plate, Used - For Allis Chalmers tractor models D14, D15, D17, D19, D21, 170, 175, Replaces Allis Chalmers OEM nos 70228040, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 448392) $48.01

No
Picture
Countershaft Gear 3rd, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 190, 190XT, Replaces Allis Chalmers OEM nos 70247728, 70240939, Teeth: 23, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437484) $256.01

Crankshaft, Remanufactured, 4507700, 4515127 - For Allis Chalmers tractor models D17 (Diesel), D19 (Gas or Diesel), Replaces Casting number 4507700, 4515127, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., 262CI, 4.375 Stroke, (Item #: 200008) $550.01

No
Picture
Cylinder Head, Remanufactured, 4512116 - For Allis Chalmers tractor model D19, Replaces Allis Chalmers Casting number 4512116, Engine 262, Cylinders: 6, Casting No. 4512116, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200035) $730.01

Cylinder Head, Used - For Allis Chalmers tractor model D19, Replaces Allis Chalmers Casting number 4512116, Engine(s): 262, Cylinders: 6, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200035, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400035) $184.01

Input Clutch Shaft, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM number 70239530, For a new version of this item use Item #: 174273, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454695) $124.01

No
Picture
Intermediate Drive Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70231941, Teeth: 27, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454691) $134.01

No
Picture
Main Shaft Bushing, Used - For Allis Chalmers tractor models D19, 170, 175, Replaces Allis Chalmers OEM nos 70235255, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453869) $50.01

No
Picture
Main Shaft Collar - Splined, Used - For Allis Chalmers tractor models D17, D19, WD (s/n 127007-later), WD45 (s/n 127007-later), 170, 175, Replaces Allis Chalmers OEM nos 70230514, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453867) $118.01

No
Picture
Main Shaft Collar, Used - For Allis Chalmers tractor models D17, D19, WD (s/n 127007-later), WD45 (s/n 127007-later), 170, 175, Replaces Allis Chalmers OEM nos 70225944, Splined, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453862) $161.01

No
Picture
Main Shaft Coupler, Used - For Allis Chalmers tractor models D17, D19, WD (s/n 127007-later), WD45, 170, 175, Replaces Allis Chalmers OEM number 70232452, Spline Count: 8, For a new version of this item use Item #: 172618, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453868) $73.01

No
Picture
Main Shaft Gear, Used - For Allis Chalmers tractor models D17, D19, WD (s/n 127007-later), WD45 (s/n 127007-later), 170, 175, Replaces Allis Chalmers OEM nos 70226718, Teeth: 40, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453861) $480.01

No
Picture
Main Shaft Gear, Used - For Allis Chalmers tractor models D17, D19 (s/n 15151-earlier), 170, 175, Replaces Allis Chalmers OEM number 70240940, Teeth: 27, For a new version of this item use Item #: 172763, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453866) $173.01

No
Picture
Pinion Gear, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 180 (s/n 12800-earlier), 185 (s/n 12800-earlier), 190, 190XT, Replaces Allis Chalmers OEM nos 70227644, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437608) $89.01

No
Picture
Pressure Plate, Used - For Allis Chalmers tractor models D14, D15, D17, D19, D21, 170, 175, Replaces Allis Chalmers OEM nos 70228067, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453984) $110.01

No
Picture
Pressure Washer, Used - For Allis Chalmers tractor models D14, D15, D17, D19, D21, 170, 175, Replaces Allis Chalmers OEM nos 70228037, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454903) $37.01

No
Picture
Reverse Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 190 (s/n 9001-earlier), 190XT (s/n 9001-earlier), Replaces Allis Chalmers OEM nos 70232530, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437485) $189.01

Engine Pistons and Sleeves

Piston Pin Bushing - For tractor models D15D, D17D, D19 used in 175 and 262 cid diesel engines. Priced Each. If you order 1, you will receive 1 bushing. (Item #: 167306, Ref: 74507127) $15.40

Engine Rings

No
Picture
Piston Ring Set - Standard - 6 Cylinder Set - For Allis Chalmers tractor models D15, D17, D19, Compatible with Allis Chalmers Construction and industrial models AT40, F30, F40, F50, F60, F70, F80, F100, F120, FD30, FD40, FD50, FD60, FD70, FD80, FD100, FD120, FDX30, FDX40, FDX50, FL60, FL70, FL80, FL100, FL120, HD3, TL10, TL11, TL12, TL14, Compatible with Allis Chalmers Engine (s) 175 (diesel), 262 (diesel), 262 (turbo diesel), Bore: 3.5625", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold as complete 6 cylinder set, For Single Cylinder Piston Ring Set use Item #: 120682, (Item #: 174183) $308.00

No
Picture
Piston Ring Set - Standard - 6 Cylinder Set - For Allis Chalmers tractor model D19, Compatible with Allis Chalmers Construction and industrial model AT60, AT70, AT80, AT100, AT120, Compatible with Allis Chalmers Engine (s) 262 (gas), Compatible with Gleaner Combine (s) F, Bore: 3.5625", Ring Size: Standard, Compression Rings per Piston: (3) @ .125", Oil Rings per Piston: (1) @ .188", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as complete 6 cylinder set, (Item #: 174184) $182.00

Piston Ring Set - Standard - Single Cylinder - For Allis Chalmers tractor models D15, D17, D19, Compatible with Allis Chalmers Construction and industrial models AT40, F30, F40, F50, F60, F70, F80, F100, F120, FD30, FD40, FD50, FD60, FD70, FD80, FD100, FD120, FDX30, FDX40, FDX50, FL60, FL70, FL80, FL100, FL120, HD3, TL10, TL11, TL12, TL14, Compatible with Allis Chalmers Engine (s) 175 (diesel), 262 (diesel), 262 (turbo diesel), Bore: 3.5625", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold per cylinder, For 6 Cylinder Piston Ring Set use Item #: 174183, (Item #: 120682) $61.00

Piston Ring Set - Standard - Single Cylinder - For Allis Chalmers tractor model D19, Compatible with Allis Chalmers Construction and industrial model AT60, AT70, AT80, AT100, AT120, Compatible with Allis Chalmers Engine (s) 262 (gas), Compatible with Gleaner Combine (s) F, Bore: 3.5625", Ring Size: Standard, Compression Rings per Piston: (3) @ .125", Oil Rings per Piston: (1) @ .188", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For 6 Cylinder Piston Ring Set use Item #: 174184, (Item #: 120686) $33.90

Exhaust System

Exhaust Elbow, Turbo - For model D19, D21, 210, 220, 7000, 7010, 7020 (Item #: 107931, Ref: 70253661) $80.00

No
Picture
Exhaust Manifold Gasket Set - For gas model: D19 (Item #: 101485, Ref: R4013G) $19.20

No
Picture
Exhaust Stack - 2-3/8 - For Allis Chalmers tractor models D15 (diesel), D17 (diesel), D19, 170, 175 (diesel), 180 (gas/diesel), 185 (diesel), 190 (gas s/n 19001-later), Inlet I.D.: 2-3/8", Body: 3-1/2", Length: 29", Notched Inlet For Easy Application, Double Wall Liner, Chrome, (Item #: 114788) $135.00

$Allis Chalmers D19 Exhaust Stack - 2-3\8$
Exhaust Stack - 2-3/8 - For Allis Chalmers tractor models D15 (Diesel), D17 (Diesel), D19, 170, 175 (diesel), 180 (Gas and Diesel), 185 (Diesel), 190 (Gas SN 19001 and up), Inlet I.D.: 2-3/8", Body: 3-1/2", Length: 29", Notched Inlet For Easy Instaltion, Double Wall Liner, Chrome, (Item #: 114789) $161.00

Manifold - For D19 Gas. Manifold, Intake and Exhaust. Gasket Available as Part #4013G. Replaces 4512715, 4513468, 4516769, 74513468, 74516769 (Item #: 101484, Ref: R4013) $274.21

Manifold Pipe - Can be used with the following manifolds 362437R21, 161158A, 161818A, 761615M91, 4512715, R0947, L415. For model D19. (Item #: 101547, Ref: R0055P) $18.40

No
Picture
Muffler - Muffler, gas. For D19 (Item #: 100048, Ref: 79015993V) $96.97

Muffler - Vertical Exhaust Inlet inside diameter 2 3/8 inch, outlet outside diameter 2 inch, overall length 27 inches. For D19 Gas. OEM number 70246130, use MC212 clamp, use R1800 rain cap. (Item #: 100048, Ref: R1563) $96.97

Fuel System / Air Intake

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Allis Chalmers it is used on Industrial: 60 (For choke cable bracket with Marvel Schebler carb # TSX591, TSX783, TSX815, TSX848, TSX853, TSX869, TSX871, TSX928), D15 (For choke cable bracket; SN: 9001 and up; with Marvel Schebler carburetor), D17 (For choke cable bracket; SN: 42001 and up; with Marvel Schebler carburetor), [ D19, 170, 175 (For choke cable bracket with Marvel Schebler carburetor) ], [ 7000, 7010, 7020, 7045, 7060, 7080, 7580 (For diesel fuel shut off cable brackets) ], [ Industrial: 500, 510, 512, 600, 612, 614, 621 (For choke cable bracket with Marvel Schebler carb number TSX591, TSX783, TSX815, TSX848, TSX853, TSX869, TSX871, TSX928) ]; Replaces: 70237169, 74047137, 29-81, B110-10 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carburetors used on: D19. Replaces Marvel-Schebler numbers TSX394, TSX777, TSX848, TSX268, TSXU839, TSXU995. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA. 1 year warranty. (Item #: 100750, Ref: 14997) $533.00

Carburetor Kit, Basic - Kit for Marvel TSX863 or TSX848 carbs used on D10, D12, D15, D17, D19, D21. (Item #: 100735, Ref: MS103) $23.50

Carburetor Mounting Gasket - For Allis Chalmers tractor models D15, D17, D19, WD45, 170, 175, 180, 185, Replaces Allis Chalmers OEM number 70233209, Fits Marvel Schebler Carburetors TSX464, TSX561, TSX648, TSX773, TSX848, TSX863, TSX869, TSX871, TSX928, Fits Zenith Carburetors 11588, 12217, 12232, 12590, 13294, 13416, (Item #: 149795) $1.70

No
Picture
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX848. For the following tractor models: D19. Add $100.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203225, Ref: 1130-CARB) $475.01

Fuel Injection Pump, Remanufactured, 74514756, Roosa Master, DBGFC637-30AJ - For Allis Chalmers tractor model D19, Replaces Allis Chalmers OEM number 74514756, Replaces Roosa Master OEM number DBGFC637-30AJ, (Item #: 210779) $1310.01

Fuel Lift Transfer Pump - For Allis Chalmers tractor model D19 (gas), Replaces Allis Chalmers OEM number 74055406, Mounting holes: 2, Inlet Position: 11 o'clock (with cam lever pointing at you), Outlet Position: 3 o'clock (with cam lever pointing at you), (Item #: 155875) $74.00

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $5.95

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor.Used on Allis Chalmers B, C, CA, D10, D12, D14, (D15 Gas To Serial Number 9001), (D17 Gas to serial Number 42000), (D19 Gas To serial Number 12000), G, I40, I400, I60, I600, 170, 175, 180, IB, RC, WC, WD, WD45, WF. Replaces original part numbers 208362, 70208362. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.70

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces 70237945 and 237945. Will fit the following models: B, IB, C, CA, G, D10, D12, D14, D15 (Gas To Sn#9001), D17 (Gas to Sn#42000), D19 (Gas To Sn#12000), RC, WC, WD, WD45, I400, WF, I600 (Gas), 170 (Gas), 175 (Gas), 180 (Gas). (Item #: 105382, Ref: 9N9162) $3.20

Fuel Tank Cap - For Tractor Models B, C, CA, G, IB, RC, WD, D10, D12, D14, D15, D17, D19, I40, I400, I60, WC, WF, WD45, 170, 175, 180, 185, Backhoe: I600. Replaces: 253690, 70253690. This is a Non-Vented Cap. 7/8 inch outside diameter, 2 11/16 inch inside diameter, 1/4 inch high. Zinc Finish. 1.850 inches edge of tang to edge of tang. (Item #: 185782, Ref: D5NN9030A) $9.00

Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: D15 (serial number 9001 and up), D17, D19, H3 (serial number 6960 and up), WD45, I600, 170, 175. Replaces 226458, 233-543, and 70226458. (Item #: 179751, Ref: C3NN9D532A) $7.00

No
Picture
Oil Breather Cap, Used - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, WC, WD, WD45, WF, 170, 175, 190, Compatible with Allis Chalmers Construction and industrial models I40, I60, I400, I600 Replaces Allis Chalmers OEM number 70200267, 70203196, 70205298, , Compatible with Case tractor models V, 200, 210B, 211B, 300, 311, 400, 410B, 411, 420, 430, 440, 441, 470, 500, 510B, 511B, 530, 531, 540, 541, 570, 580, 600, 610B, 611B, 630, 640, 641, Compatible with Case Combine(s) 660, Compatible with Case Construction and industrial models W3, W5, 310, Compatible with Case Hay Cutting(s) 1150 Replaces Case OEM nos A36608, VT3545, , Compatible with CockShutt / CO OP tractor models E3, 30, 40, 50, Compatible with International tractor models 354, 424, 2300A Replaces International OEM nos 364899R91, , Compatible with John Deere tractor models L, M, 40, 320, 330, 420, 430, 440 Replaces John Deere OEM nos AM1586T, AM494T, AM669T, , Compatible with Minneapolis Moline tractor models BF, BG, Jet Star, Jet Star 2, Jet Star 3, Super 4 Star, 4 Star, 335, 445, Replaces Minneapolis Moline OEM nos 1010278, 10A10401, Replaces Avery OEM nos AT576, VT106, Height: 3 1/4", "OIL" Is Stamped On Top Of Cap, Includes Copper Filter Element, For a new version of this item use Item #: 110064, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435465) $20.01

Sediment Bowl Assembly - Large bowl, single inlet type. Used on; (D15 Gas serial number 9001 and up and All Diesel using 2.315 Long Glass Bowl), (D17 Gas serial number 42001 and up and all Diesel using 2.315 Long Glass Bowl), (D19 Gas serial number 12001 and up and all Diesel using 2.315 Long Glass Bowl), (D21, WD45, 170, 175, 180, 185 all 2.315 Long Glass Bowl), (U Gas only using 2.315 Long Glass Bowl and single outlet ), (UC Gas only using 2.315 Long Glass Bowl and single outlet), (190, 190XT Gas, Diesel. Using 2.315 Long Glass Bowl). Fittings are 3/8 inch pipe inlet, 1/8 inch pipe outlet, 2.315 inch tall glass bowl. Replacement bowl available as part S.65504. Replaces: 237946 and 70237946. (Item #: 105393, Ref: S.61581) $22.00

Sediment Bowl Assembly - Sediment bowl. Fits Model B, C, CA, R, D14, D17, D19. Replaces 70237944. Might look slightly different than picture. (Item #: 105362, Ref: 910513) $19.00

Sediment Bowl Assembly - Small Bowl, 2 outlet type. A 1/8 Inch Pipe Plug will be needed if only one outlet is used. For Models: D10, D12, WC, WD, WD45, D15D, D17, D19, D21, 180, 170 diesel. (Item #: 105369, Ref: 70239167) $22.60

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: D15 Gas (SN: 9001 and up), and all diesel, D17 Gas (SN: 42001 and up) and all diesel, D19 Gas (SN: 12001 and up) and all diesel, D21, U, UC, WD45, 170, 175, 180, 185, 190, 190XT. Replaces 70237947V, 237947. (Item #: 105365, Ref: S.65504) $5.50

Sediment Bowl Bail with Brass Nut - For Allis Chalmers tractor models D15 (gas, s/n 9001-later), D17 (gas, s/n 42001-later), D19 (gas, s/n 12001-later), D21, U, UC, WD45, 170, 175, 180, 185, 190, 190XT Replaces Allis Chalmers OEM number 70223248, 223248, , Compatible with Case tractor models C, L (gas, 1939-earlier), LA (gas, s/n 4600027-earlier), LI (gas, 1939-earlier), 400, 410, 411, 412, 700, 730CK, 800, 840, Compatible with Case Construction and industrial models W5, W5A, W7, W8, W9, W10, 500, 680CK Replaces Case OEM number A11206, A11207, , Compatible with CockShutt / CO OP tractor models E3, E4, 20, 30, 40, 50, 540, 550 Replaces CockShutt / CO OP OEM number T07088, 12084G, , Compatible with International tractor models A, B, C, F12, F14, F20, F30, H, HV, Hydro 70, I4, I6, I9, OS4, OS6, Super C, Super M, Super MTA, Super W4, Super W6, Super W9, TD6 (s/n 29964-earlier), W12, W30, W40, 10-20, 15-30 (s/n 45513-later), 22-36, 100, 130, 140, 200, 230, 300, 340, 350, 400, 450, 460, 504, 560, 606, 656, 660, 666, 766, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 500 Replaces International OEM number 17564D, , Compatible with John Deere tractor models A (Styled and Unstyled), AI, AI (Styled and Unstyled), ANH (Styled and Unstyled), AO (Styled and Unstyled), AR, AR (Styled and Unstyled), AW, AW (Styled and Unstyled), B, B (Styled and Unstyled), BN (Styled and Unstyled), BNH (Styled and Unstyled), BO (Styled and Unstyled), BR (Styled and Unstyled), BWH (Styled and Unstyled), D (Styled and Unstyled), G, G (Styled and Unstyled), GH, GH (Styled and Unstyled), GM, GM (Styled and Unstyled), GN, GN (Styled and Unstyled), GW, GW (Styled and Unstyled), H, HNH, HWH, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2010, 4030, 4230, Compatible with John Deere Combine (s) 45, 55, 95, 105, 3300, 4400, 6600, 6602, 7700 Replaces John Deere OEM number AA517R, , Compatible with Massey Ferguson tractor models Super 90 (s/n 888673-earlier), 50 (s/n 536843-later), 65, 85 (s/n 807752-later), 135, 150, 165, 175, 180, Compatible with Massey Ferguson Construction and industrial models 20, 30, 50, 202, 204, 302 (s/n 119701046-later), 304 (s/n 119751024-later), 356, 2135, 3165 Replaces Massey Ferguson OEM number 505472M91, 1018079M91, , Compatible with Massey Harris tractor models Colt, Mustang, 20, 22, 30, 44, 55, 81, 82, 101, 102, 303, 333, 555 Replaces Massey Harris OEM number 12084G, , Compatible with Minneapolis Moline tractor models G, G707, G708, GB, GTA, GTB, GTC, R (s/n 404800-earlier), RTN (s/n 404800-earlier), RTU (s/n 404800-earlier), U (s/n 544001-later), U, UB, UB (Special), UDLX, UT (s/n 317400), UT, UTS (s/n 317400), UTS, Z (s/n 571686-earlier), ZAS (late, s/n 701911-later), ZB (late), ZBE (late), ZBN (late), ZBU (late), ZTU (s/n 611511-earlier), Compatible with Oliver tractor models Super 66, Super 99, 60, 66, 70, 80, 90, 99, 660, 950, Compatible with Oliver Construction and industrial models HG, OC3, Replaces Oliver OEM number BS5305A, CS5305A, Replaces White OEM number 1BS-5305A, O.D. 2-1/8", Length 2.970", (Item #: 126520) $10.60

Sediment Bowl Gasket - 2" - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15 (gas, s/n 9001-earlier), D17 (gas, s/n 42000-earlier), D19 (gas, s/n 12000-earlier), G, IB, RC, WC, WD, WD45, WF, 170 (gas), 175 (gas), 180 (gas) Replaces Allis Chalmers OEM number 70208362, 208362, , (Item #: 105372) $1.30

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 208325, 208363, 70208325, 70208363 (Item #: 105364, Ref: 49923D) $3.50

Sediment Bowl Screen - For Allis Chalmers tractor models D15 (gas s/n 9001 and up), D17 (s/n 42001-earlier), D19 (s/n 12000-earlier), D21, WC, WD45 (diesel), WF, 170 (gas s/n 7500-earlier), 180 (diesel), 185 (diesel), 190 (gas) Replaces Allis Chalmers OEM number 70208325, 208325, , Compatible with Gleaner Combine (s) F2, K2, L2 (Engine: D2900 or D3500), Compatible with International tractor models A, B, C, H, M, Super A, Super C, Super H, Super M, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 560, 656, 660, 706, 756, 766, 806, 826, 856, 2706, 2756, 2806, 2826, 2856 Replaces International OEM number 13194D, , Compatible with John Deere tractor models A, B, 60, 70, 80, 620, 630, 720, 730, 820, 830 Replaces John Deere OEM number AA519R, , Compatible with Massey Ferguson tractor models 30, 50, 135, 150, 165, 175, 180 (diesel), 2135, Compatible with Massey Ferguson Construction and industrial models 20, 202, 204, 302, 304, 356, Replaces Massey Ferguson OEM number 1037982M1, 2-1/8" OD, 7/16" Center Hole, (Item #: 112253) $4.10

Sediment Bowl, Large - For tractor models WD45D, D15D, D17, D19, D21, 170, 180. All with diesel engines. (Item #: 105393, Ref: 581355) $22.00

Gauges

Ammeter - Ammeter for tractor models 170, 190, D10, D12, D14, D15, D17, D19, D21. (Item #: 110403, Ref: 70254407) $20.90

Amp Gauge - This amp gauge has the "Allis-Chalmers" logo printed on the face. It fits the following tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, 160, 170, 175, 180, 190, 190XT, 200, 210, 220. It is meant to be used on systems that have been converted to 12 volts. It has a white face, chrome bezel, and it reads 60-0-60. Replaces 70254407, 254407 (Item #: 187035, Ref: ACS1833) $32.14

Amp Meter - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, RC, WC, WD, WD45, WF, Replaces Allis Chalmers OEM number 70254407, (Item #: 162433) $10.00

No
Picture
Amp Meter Gauge - For Allis Chalmers tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180 (s/n 12799 - earlier), 185, 190, 190XT, 200, 210, 220, Replaces Allis Chalmers OEM number 70254407, 70240987, 60-0-60, Voltage: 12, Diameter: 2", (Item #: 173678) $14.80

Dash Light with 12V Bulb - Used on the following Allis Chamlers models: D10, D12, D14, D15, D17, D19, D21, I40, I400, I60, I600, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, this Dash Light replaces OEM part numbers 229203, 230247, 234404, 70229203, 70230247, 70234404. This part has a 0.658 inch socket diameter, 1 inch center to center on mounting holes and a Chrome finish. (Item #: 105311, Ref: 70234404) $29.50

Dash Warning Light - Know when you oil pressure is low with this Dash Warning Light. This is a 12 - volt light with red dome. It is 2.191 inches over all length, with 0.675 inch outside diameter threads. 2 Spade Terminals. Used on Allis Chalmers D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces part numbers 240837, 240838, 240869, 276390, 70240837, 70240838, 70240869, 70276390 (Item #: 182846, Ref: 240837) $27.00

Instrument Panel Trim - New and Improved ~ 1/2 inch swirl, machine turned design on stainless steel. For tractor models (D15 serial number 9001 and up), (D17 serial number 32001 to 75000), D19. Replaces 234433, 70234433. (Item #: 179245, Ref: 234433) $95.00

Oil Pressure Gauge - For Allis Chalmers tractor models D15, D17, D19, WD45, Replaces Allis Chalmers OEM number 70226967, 70200197, 70206959, 70232546, 0-80 PSI, Dash/Bracket Mounted, 1/8" NPT Thread, (Item #: 121646) $32.00

No
Picture
Proofmeter Cable - This Proofmeter Cable is 56-3/4 inches long. It is used on Allis-Chalmers D19 gas. Replaces original part numbers 237076, 261605, 70237076, 70261605. (Item #: 108039, Ref: E8NN17365AA) $35.00

Tachometer - For model D19. Replaces 236655. (Item #: 110418, Ref: 70236655) $60.00

Tachometer Gauge, Remanufactured, 70236655 - For Allis Chalmers tractor model D19, Replaces Allis Chalmers OEM number 70236655, For a New version of this sku use Item #: 110418, (Item #: 204002) $158.01

Temperature Gauge - For Allis Chalmers tractor models D10, D12, D14, D15, D17, D19, WD45, Compatible with Case tractor models C, D, L, S, V, 200, 200B, 210B, 211B, 400, 410, 411, 412, 420, Compatible with Case Construction and industrial models 310, 420, Compatible with CockShutt / CO OP tractor models E3, E4, 20, 30, 40 (Blackhawk), 50 (Blackhawk), 550, 560, 570, Compatible with International tractor models C, Super C, TD5, TD6, TD9, 200, 230, 240, 300, 330, 340, 350, 400, 444, 450, 460, 560, 660, 2444, 3444, 3514, 3616, Compatible with John Deere tractor models A, B, D, G, H, M, R, 40 (Blackhawk), 50 (Blackhawk), 60, 70, 80, 320, 330, 420, 430, 520, 530, 620, 630, 720, 730, 820, 830, 840, Compatible with Massey Ferguson tractor models Super 90, TO35, 35 (Blackhawk), 40 (Blackhawk), 50 (Blackhawk), 65, 85, 88, 135, 150, 165, 175, 180, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40 (Blackhawk), 50 (Blackhawk), 60, 70, 80, 202, 203, 204, 205, 302, 304, 356, 406, 1001, 2135, 2200, 2500, 3165, Compatible with Massey Harris tractor models Colt, Mustang, Pacer, Pony, 20, 22, 30, 33, 44 (Special), 50 (Blackhawk), 55, 81, 82, 101 (Jr), 102 (Jr), 201, 202, 203, 303, 333, 444, 555 Replaces Massey Harris OEM number 21475A, , Compatible with Minneapolis Moline tractor models BG, Big Mo, G, GB, GTA, GTB, GTC, Jet Star, Jet Star 2, Jet Star 3, M5, M504, M602, M604, M670 (Super), M670 Super, R, RT, RTI, RTU, U, U302, UB (Special), UDLX, Z, 4 Star, Compatible with Oliver tractor models Super 44, Super 55, Super 66, Super 77, Super 88, Super 99, 60, 66, 70, 77, 80, 88, 90, 99, 440, 660, 900, 950, 990, 995, Chrome Bezel, Dash Mounted, No Logo, 90 Degree Pointer Sweep, Capillary Tube: 72" Long, Heavy Duty, Thread: 5/8"-18 UF, Pipe Bushing: 1/2" NPT, 110-230 Degrees, (Item #: 150686) $33.40

Traction Booster Gauge, Fully Functioning - WORKING booster gauge. For tractor models CA, WD, WD45, (D10 up to serial number 9199), (D12 up to serial number 9167), D14, (D15 up to serial number 9000), (D17 up to serial number 75000), D19. Replaces 228977, 226631, 70226631, 235598, 70235598, 70228977. (Item #: 103880, Ref: 70228977) $108.00

Hitch / Drawbar

Drawbar - 52.25 inches long, 2.50 inches wide, 1.250 inches high with holes at 1.720 inches, 4.331 inches, 5.692 inches, 8.332 inches from front. For tractor models 190, 190XT, 200, 7000, D19. Additional $30 shipping due to weight. (Item #: 110133, Ref: 70239813) $311.00

Lift Arm Latch Coupler Spring - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, WD, WD45, 190, 190XT, Replaces Allis Chalmers OEM number 70235881, 70327360, 235881, 327360, Overall Length 3-1/4", (Item #: 126680) $6.70

Hydraulic System

Hydraulic Filter - Oil filter element, spin on type. For 180, 185, 190, 190XT, D15, D17, D19, D21 (Item #: 119292, Ref: 70239930) $15.60

Lights

Dash Light, Chrome, 12 Volt - For tractor models 170, D10, D12, D14, D15, D17, D19, D21, 175, 180, 185, 190, 190XT, 200, 210, 220, I-40, I-400, I-60, I-600. Replaces 230247, 234404, 70230247, 70234404. (Item #: 105311, Ref: 229203) $29.50

Light Switch - Comes with knob. For tractor models D10, D12, D15, D17, D19, D21, 190, 190XT, 190XT III. Replaces 70235977, 70235976. (Item #: 114720, Ref: AA4667R) $16.60

Light Visor - This Light Visor is used on Allis Chalmers (D10, D12, D15 all Serial Number 9001 and up), D17 Serial Number 42001 and up, D19. Replaces: 236352, 70236352 (Item #: 126565, Ref: 534347M1) $20.20

Sealed Beam Bulb - Red backed, work/tail light, 4-1/2 inch diameter. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 6040, 7030, 7050, D10, D12, D15, D17, D19, D21. (Item #: 116014, Ref: 70250301) $23.50

$Allis Chalmers D19 Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Item #: 150699, Ref: TLBULB12V) $1.70

Work Tail Light Assembly - 12 VOLT WOK LIGHT. For AC models: D10, D12, D14, D15, D17, D19, D21, 190, 190XT, 190XT III. (Item #: 124573, Ref: 70243313) $125.65

Miscellaneous

No
Picture
Belt Pulley Cover, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70227672, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453971) $39.01

Oil System

Oil Fill Breather Cap, NO Clip - 3-1/4 inches tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Fits over 1-1/2 inch pipe. Replaces OEM numbers 203196, 205298, 200267. (Item #: 110064, Ref: R4459) $21.90

Oil Fill Breather Cap, With Clip - 3-1/4 inches tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Replaces OEM numbers 203196, 205298, 200267. (Item #: 107000, Ref: R4458) $44.60

Oil Filter, Spin On - Spin on style oil filter measures with dimensions of 5 13/32 inches in length, 3 11/16 inches O.D. Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Item #: 118399, Ref: E7NN6714AA) $14.50

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Uses EBU6734A washer, sold separately. Replaces 205060, 224994, 225585, 225657, 226408, 4026437, 74026437. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.70

PTO / Driveline

No
Picture
PTO Coupling-Shaft, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70229310, 70227579, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437456) $104.01

No
Picture
PTO Drive Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70231944, Teeth: 55, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453932) $125.01

No
Picture
PTO Drive Shaft, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70231943, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453933) $161.01

No
Picture
PTO Gear Cover, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70229299, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453972) $35.01

PTO and Lift Shaft Housing Seal - PTO Outer Seal for 1 speed, 1 3/8 inch output shaft. This oil seal measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide For tractor models B, C, CA, D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 190XT III, 200. Replaces: 224810, 230608, 241779, 70224810, 70230608, 70241779 (Item #: 128541, Ref: 70241779) $7.30

Paint

No
Picture
Paint, Cream, 1 Gallon - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108324, Ref: TP270GAL) $66.00

No
Picture
Paint, Cream, 1 Quart - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108323, Ref: TP270QT) $32.80

No
Picture
Paint, Cream, Spray Can - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108322, Ref: TP270SP) $10.20

No
Picture
Paint, Persian Orange #2, 1 Gallon - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108317, Ref: TP285GAL) $54.00

No
Picture
Paint, Persian Orange #2, 1 Quart - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108316, Ref: TP285QT) $23.40

No
Picture
Paint, Persian Orange #2, Spray Can - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108315, Ref: TP285SP) $8.30

Seats

Back Cushion, Wood Backing - This High Quality Back Cushion is on a wood backing. It is not exactly like the original. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces: 236460, 70236460 (Item #: 70236460W) $52.91

Back Rest Cushion on Steel - This Back Rest Cushion is restoration quality with powder coated steel backing. Cushions are embossed like original. High quality stitching. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces: 236460, 70236460 (Item #: 101195, Ref: 70236460-OE) $76.00

Seat Back - Black and White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178464, Ref: R4357) $246.00

Seat Back - Black and White Vinyl on Wood For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Item #: 178469, Ref: R0853) $95.00

Seat Back-MADE IN USA - Black and White Vinyl on Steel For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178461, Ref: R0851) $325.00

Seat Bottom - Black and White Vinyl on Steel For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178463, Ref: R0850) $331.00

Seat Bottom - Black and White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178465, Ref: R4356) $362.00

Seat Bottom - Black and White Vinyl on Wood. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Item #: 178471, Ref: R0852) $144.00

Seat Bottom Cushion - This Seat Bottom Cushion Restoration quality with powder coated steel backing. Cushions are embossed like original. High quality stitching. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces 236461, 70236461 (Item #: 178946, Ref: 70236461-OE) $285.01

Seat Bottom Cushion, Wood Base - This is a high quality replacement for Allis Chalmers D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). It has a wood base. Not exactly like the original. Replaces 236461, 70236461 (Item #: 179372, Ref: 70236461W) $103.00

Seat Cushion Set - This Black and white vinyl two piece cushion set is steel backed. Consists of R4356, R4357 plus the Seat Frame. Original style pleated covering. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. Replaces: 236318 (Item #: 178950, Ref: R4358) $557.00

Seat Frame - Used with two cushions on Allis Chalmers models: 170, 175, 180, 185, 190, 190XT, 200, 220, 7030, 7050, D10, D12, D14, D15, D17, D19 (Item #: 70243740PAN) $172.91

Seat Shock Absorber - Compatible with Allis Chalmers Tractors: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580. Replaces Allis Chalmers OEM nos 70227917, 227916, 227917, 70227916. Includes Shock, Spring, Retainers, Collar and Bushings. 11-3/4 iches center to center when extended, 8-1/8 inches center to center when compressed. (Item #: 105315) $114.30

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Sheet Metal / Body Parts

No
Picture
Fender - Left Hand - For Allis Chalmers tractor models D17, D19, Replaces Allis Chalmers OEM number 70237344, Fits left hand side, Not restoration quality, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 105557) $427.15

Fender, LH - For tractor models: D17, D19. Mounting bracket not included. FIT TO TRACTOR BEFORE PAINTING, This fender is primer painted, color may vary, it will need to be sanded and filler primer to fill in any spots from spot welding. This fender is handmade overseas and is somewhat crude. Currently, this is the only fender that we are able to offer for these models. They are not perfect. 15 gauge (.064 thick). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 70237342, 237342 (Item #: 105556, Ref: 720192) $427.15

Fender, RH - For tractor models: D17, D19. Mounting bracket not included. FIT TO TRACTOR BEFORE PAINTING, This fender is primer painted, color may vary, it will need to be sanded and filler primer to fill in any spots from spot welding. This fender is handmade overseas and is somewhat crude. Currently, this is the only fender that we are able to offer for these models. They are not perfect. 15 gauge (.064 thick). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 105556, Ref: 720193) $427.15

Side Panel, LH - Left Hand. For tractor models D17 Gas, D19. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104041, Ref: 70232149) $65.00

Side Panel, RH - Right Hand For D17 Series III and IV Gas, D19. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104040, Ref: 70235512) $76.00

Toolbox - Measures 21-3/8 Inches long, 6-3/16 Inches high, 4 Inches wide. For tractor models D15, D17, D19, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces: 236661, 242323, 249750, 70249750 (Item #: 103876, Ref: 70249750) $65.00

Weight Bracket Kit - For Allis Chalmers tractor models D15, D17, D19, Replaces Allis Chalmers OEM number 236049, 70236049, 70239528, 70239529, 239528, 239529, LH, RH and Front Brackets, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 125685) $240.00

Steering

Pivot Pin Assembly - Includes: 70916896 (7/8 inch NF slotted nut) and 70925721 (5/32 inch X 2 inch cotter pin). For tractor models (170, 175 gas with roll shift front axle), (180, 185, 190, 190XT, 200, D19 all with roll shift front axle), (D17 serial number 38136 and up with roll shift front axle). (Item #: 104301, Ref: 70235154) $65.00

Spindle Bushing - Used on spindle 70237434, on tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 110538, Ref: 70211743) $13.00

Spindle Thrust Washer - For tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 111696, Ref: 70218762) $6.40

$Allis Chalmers D19 Spindle, LH\RH$
Spindle, LH/RH - This spindle measures A=14 inch, B=1.610 inch, C=1.625 inch, D=1.187 inch. For tractor models 180, 185, 190, 190XT, 200, D19. Uses wheel bearing kit part number WBKAC2. (Item #: 100094, Ref: 70262782) $166.00

No
Picture
Steering Arm - Left Hand For D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200 (Item #: 100105, Ref: R2824) $117.00

Steering Arm - Left Hand, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM number 70245867, 1.610 inches inside diameter, Left Hand, For a new version of this item use Item #: 100105, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497088) $75.01

Steering Arm - Right Hand, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM number 70245868, (1.610 inches inside diameter), Right Hand, For a new version of this item use Item #: 100106, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497155) $83.01

Steering Arm, LH - Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Item #: 100105, Ref: 70245867) $117.00

Steering Arm, RH - Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Item #: 100106, Ref: 70245868) $141.00

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Used on Allis Chalmers D14, D15, D17, D19, RC when using later style steering joint # 224825, WC when using later style steering joint # 224825, WD, WD45 Diesel, WF when using later style steering joint # 224825. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.00

Steering Wheel - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2 inch diameter, splined hub. Black Plastic with Covered Spokes. Diamond Center AC Logo available as part number R3996. Also replaces 232033. (Item #: 101405, Ref: 70232033) $62.15

Steering Wheel - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2" Diameter, Splined Hub. Creme Plastic with Covered Spokes. Diamond Center AC Logo Available as Part#R3996. Replaces 70233857, 70233851, 233851 (Item #: 101406, Ref: R3993) $56.00

Steering Wheel Center Logo - For D10, D12, D14, D15, D17, D19, D21. CHROME Steering Wheel Center Logo used on 70232033 and 70233851 steering wheels. Replaces 70228474, 70233852, 70246724 (Item #: 101407, Ref: R3996) $20.70

Steering Wheel Emblem Decal - 1-1/2 inches x 1-1/2 inches Black and Orange on White decal. Used as a steering wheel emblem on later model that did not use the metal emblem. (Item #: R5167) $3.50

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

No
Picture
Steering Wheel, Black - 17-1/2" diameter, splined, covered steel spokes. For tractor models D10, D12, D14, D15, D17, D19, D21. (Item #: 101405, Ref: 70232033V) $62.15

Steering Wheel, Cream - For D10, D12, D14, D15, D17, D19, D21. Steering Wheel. 17 1/2 inch diameter, splined hub. Creme Plastic with Covered Spokes. Diamond Center AC Logo available as part number R3996. (Item #: 101406, Ref: 70233851) $56.00

Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 1.197 inch inside diameter, a 1.700 inch outside diameter and is 455 inch wide. It fits (D14, D15, D17 Rear wormshaft bearing, manual steering only), D19 (rear wormshaft bearing, manual steering only - 1 used per tractor) Replaces original part numbers: 228150, 70228150. (Item #: 126732, Ref: 70228150) $16.00

Tie Rod Assembly - Consists of OEM part numbers 70250140 and 70250141. Replaces: 249418, 225280, 225279, 254662, 254661. For (D14, D15, D17, D19, WD, WD45 Fits these models if cut to length), (170, 175, 180, 185, 190XT, 200 fits these models with standard front end). (Item #: 100082, Ref: 70254660) $52.00

Tie Rod Clamp - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 180, 185, Compatible with Massey Ferguson tractor models 50 (s/n 528163-533422), 65 (Gas s/n 671680-692932 or Diesel s/n 667918-692932), 150, Compatible with Massey Ferguson Combine (s) 32, Compatible with Massey Ferguson Construction and industrial models 304, Replaces OEM number CLP12, (Item #: 104281) $4.20

Tie Rod End, Female - 17.500 inches long. For tractor models 180, 185, 190, 190XT, 200. Will also fit 170, D14, D15, D17, D19 if cut to proper length. Can also replace 250142 used on WD, WD45 if cut to length. (Item #: 100083, Ref: 70254661) $23.60

Tie Rod Male - Tie rod end with tube, outer. For adjustable front axles. 16-1/2 inches to center of post. 0.812 inch diameter. 50 inch minimum thread, not for Hi-Clear. For 180, 185, 190, 190XT, 200, D17, D19. (Item #: 100084, Ref: 70254662) $25.50

Upper Steering Wheel Shaft Bushing - Inside diameter .883 inch, outside diameter 1.125 inch, thickness .995 inch. For the following models: D14, D15 (2 used), D17 (2 used), D19 (2 used), D21, I600 (2 used), 180, 185, 190, 190XT, 200, 210, 220, 600. Replaces 206968, 228188, 228255, 70206968, 70228188, 70228255. (Item #: 122000, Ref: 364527R91) $9.30

Wheels

Bearing Cone - Inner cone for front wheel bearings. For tractor models 170, 180, 190, D17, D19. (Item #: 112217, Ref: 70209899) $7.01

Bearing Cup - Inner cup for front wheel bearings. For 170, 180, 190, D17, D19 (Item #: 111704, Ref: 70235089) $13.90

Bearing Cup - Outer cup for front wheel bearings. For 170, 180, 190, D14, D15, D17, D19, WC, WD, WD45 (Item #: 180095, Ref: 70209983) $6.20

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 235727, 237405, 70235727, 70237405 (Item #: 103768, Ref: FW60166) $92.00

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $104.00

Front Rim-Heavy Duty - Front Rim with weight holes. 4.5 inch x 16 inch, 2500 lb. capacity. 6 bolt, 6 inch circle, 4.62 inch pilot for 5.50 inch x 6.00 inch x 16 inch tires. Also replaces OEM # 70235086, 70248460. Fits Models: (D15 with serial number below 9001), (D17 with serial number below 75001), D19, ED40, 160, 170, 175, 180, 185, 190, 190XT, 6060, 6070. Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $70.00

Front Wheel Bearing Kit - This is a complete Front Wheel Bearing Kit for 1 wheel, with a 6 bolt hub. Verify individual part numbers to ensure you are ordering the correct kit. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 500, 600, 6060, 6070, 6080, 615, 7000, (D15 serial number 9001 and up with 6 bolt hub), (D17 serial number 42001 with 6 bolt hub), D19, I60, I600. Kit contains one of the following 15250B, 15118, 26823, 26882, 70235120. (Item #: 100099, Ref: WBKAC2) $45.50

Front Wheel Lug Bolt - Used in many applications, this wheel stud has 1/2 inch - 20 NF thread, 1 inch thread length and 13/16 inch hex head. Used on Allis Chalmers 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, B, C, CA, D10, D12, D14, D15, D17, D19, G as rear rim lug bolt, WC, WD, WD45, WF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863. (Item #: 111560, Ref: 512581M1) $1.60

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims 535453M91, 535452M91, PAR10X28, C5NN1050J and C5NN1050H. Replaces: 218662, 225190, 70218662, 70225190, 70273627. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.60

Wheel Hub - For use with threaded hub cap, 4.620 inch diameter pilot hole, 6.00 inch wheel bolt circle, replaces OEM number 236706. For tractor models 170, 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060 with 96 inch tread), 6070, 6080, 615, (7000 early), D15, D17, D19, 160, 1600. (Item #: 100102, Ref: 70261418) $57.00

Wheel Hub Cap - This is a threaded type front wheel hub cap for tractor models 170, 175, 180, 185, 190, 190XT, 200, 6070, 6080, (7000 early), D15, D17, D19. (Item #: 104560, Ref: 70220403) $16.10

No
Picture
Wheel Hub, Used - For Allis Chalmers tractor models D15 (s/n 9001-later), D17 (s/n 42001-later), D19, 160, 170, 175, 180, 185, 190, 190XT, 210, 220, 6060, 6070, 6080, 7000, Compatible with Allis Chalmers Construction and industrial models I60, I600, 615, Replaces Allis Chalmers OEM nos 70236706, 70261418, 70242599, Replaces Casting nos 261416, 33106-R, Pilot diameter: 4.620", Wheel bolt circle: 6", Wheel bolt holes: 6, Use with pressed in hub cap, Stud bolts not included, For a used version that uses threaded on cap see Item # 400102, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., " (Item #: 496579) $55.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

AC Diamond Decal - Black and White, Milwaukee, 6 inches x 6 inches. Vinyl Cut. (Item #: 183055, Ref: R4634) $14.20

AC Diamond Decal - Orange Background, 5 1/2 inches x 5 1/2 inches. (Item #: 183122, Ref: R4633) $12.00

AC Diamond Decal - Black and White, 4 inches x 4 inches, Vinyl Cut. (Item #: 183053, Ref: R4632) $9.90

AC Diamond Decal - 1 inches x 1 inches orange, blue and gold printed on vinyl. (Item #: 183049, Ref: R5234) $2.60

AC Logo Decal - 1-1/2 inches x 8 inches, Black and Orange on White. (Item #: 100153, Ref: R0675) $3.50

AC Logo Decal - 3 inches x 18 inches, Black and Orange on White. (Item #: 100154, Ref: R0676) $8.80

AC Logo Decal - 24 inches long, Black and Orange. (Item #: 183479, Ref: R0677) $27.50

AC Logo Decal, New Style - 3-1/2 inches x 3-1/2 inches Black and Orange on White. (Item #: 100163, Ref: R5168) $3.50

AC Logo Decal, New Style - 4-1/2 inches x 4-1/2 inches Black and Orange on White. (Item #: 100152, Ref: R5169) $5.30

AC Logo Decal, New Style - 8 inches x 8 inches Black and Orange on White, printed on vinyl. (Item #: 183047, Ref: R5233) $23.60

No
Picture
Power Shift Decals - One pair, white. For the cab on some Allis models. (Item #: 183474, Ref: R0674) $27.50

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 and newer). Just call us at 800-853-2651.

NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket For Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - This thermal battery wrap is used to keep your battery warm. It is 60 Watts and measures 28 inches long. (Item #: BTW28) $22.50

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models (Item #: 105281, Ref: D4PE12029AA) $16.30

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $19.20

NOTE

STARTER - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Spark Plug - Fits all models 1953 thru 1975 using 1/2" reach, 7/8" heck size. (Item #: 113918, Ref: AL3116) $5.00

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

$Allis Chalmers D19 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Allis Chalmers D19 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Allis Chalmers D19 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Allis Chalmers D19 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Allis Chalmers D19 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Allis Chalmers D19 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Allis Chalmers D19 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.75 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Item #: 114940, Ref: R7949) $9.92

$Allis Chalmers D19 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16) inch, four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H. Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Orange - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161192) $123.00

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Allis Orange, 1 Quart - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100109, Ref: TP280QT) $24.00

No
Picture
Paint, Allis Orange, Spray Can - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100108, Ref: TP280SP) $8.50

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat, Air Suspension, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Universal - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Tie-On Seat Cover - Orange and White, 21 inches wide. Fits 19 or 21 inch wide pan seats. Deluxe with 2 inches of foam. (Item #: 179007, Ref: R1012) $63.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Item #: 164438, Ref: ABC1417) $47.60

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Item #: 182520, Ref: S.04352) $3.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for radial tires. (Item #: 183819, Ref: WHS064) $82.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00