Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers D12 Parts

Category: Fuel System / Air Intake

[Categories]   [All D12 Parts]   [All Allis Chalmers Models]  


Allis Chalmers D12 Air Cleaner Cap
Air Cleaner Cap
- Inlet diameter 1-5/8 inch, outside diameter of cap 4 inches, overall height 1-3/8 inches. For tractor models B, C, (CA Used on Eng. No. CE-13732 & up), D10, D12. Replaces 225860, 242072. (Part No: 70242072)
$17.82

Allis Chalmers D12 Air Cleaner Hose Clamp
Air Cleaner Hose Clamp
- This clamp is used on B, C, CA, D10, D12, D14, RC, WC, WD as an air cleaner hose clamp. Works for hose outside diameter from 1 3/4 inches to 2 inches. It Replaces: 921913, 910144. (Part No: 608287)
$3.75

Allis Chalmers D12 Carburetor Float
Carburetor Float
- This carburetor float is 2.25 inches wide and is used for the following Zenith carburetor models: 8691, 9636, 9635, 9804, 9805, 10697, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 8561, 8691, 11141, 11142, 12401, 12749, 12401, 12749, 8781, 8979, 9707, S1203, 10981 and for tractor models: B, C, CA, D10, D12, WC, and WD. (Part No: CTP28)
$16.50

Allis Chalmers D12 Carburetor Fuel Needle
Carburetor Fuel Needle
- Main Jet Adjusting Needle Assembly for Zenith carburetor series 61 and 62, model numbers: 9707, 10981, 12401, 12749, 13876. For D10, D12, W, WC, WD, WF. (Part No: 71-28)
$9.68

Allis Chalmers D12 Carburetor Kit, Basic
Carburetor Kit, Basic
- Kit for Zenith 8561, 8691, 9636, 9635, 9804, 9805, 106977, 9706, 9705, 10699, S906, 10698, S1204, 10903, 10902, 11142, 12401, 12749, 8781, 8979, 9707, S1203, 10981 carbs used on B, C, CA, D10, D12, WC, WD. (Part No: Z101)
$19.50

Allis Chalmers D12 Carburetor Kit, Basic
Carburetor Kit, Basic
- Kit for Marvel TSX863 or TSX848 carbs used on D10, D12, D15, D17, D19, D21. (Part No: MS103)
$16.80

Allis Chalmers D12 Carburetor Kit, Basic
Carburetor Kit, Basic
- Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For tractor models B, B15, C, D10, D12, CA, IB, R, W, WC, WD. (Part No: K2119)
$24.00

Allis Chalmers D12 Carburetor Kit, Basic
Carburetor Kit, Basic
- Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 13876, 12522, 12522B. (Part No: BK44V)
$26.25

Allis Chalmers D12 Carburetor, New
Carburetor, New
- Aftermarket replacement for 12522 outperforms the original Marvel carburetors: TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. Linkage is reversible. This carburetor comes with studs which attach to the carburetor and will not work with those applications that the studs need to attach to the manifold. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. 1 year warranty. For models using the above listed carburetor numbers on models B, B-15, C, D10, D12, CA, IB, R, W, WC, WD. (Part No: 12522B)
$220.73

Allis Chalmers D12 Carburetor, New
Carburetor, New
- With reversible linkage. This Zenith carburetor outperforms the original carbs used on: B, B-15, C, D10, D12, CA 1952-56, IB, R, W, WC, WD Crawler. Replaces TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. This carburetor comes with studs that attach to carburetor. THIS WILL NOT WORK IN THOSE APPLICATIONS THAT STUDS MUST BE USED IN THE MANIFOLD. 2 5/16 INCHES CENTER TO CENTER ON MOUNTING BOLTS. Made in USA, 1 year warranty. (Part No: 12522)
$372.60

No
Picture
Carburetor, Rebuilt
- Fits D10, D12 (1961-68) - replacement for OEM 12749, 12401. Add $50.00 core charge to price (will be added after order is placed when ordering online) - this charge is refundable if you send your core to us. (Part No: 1122-CARB)
$157.70

No
Picture
Carburetor, Rebuilt
- This Zenith style aftermarket replacement for 12522. Replaces Marvel numbers TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. Linkage is reversible. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. For models using the above listed carburetor numbers on models B, B-15, C, D10, D12, CA, IB, R, W, WC, WD. A $50.00 core charge will be added to the price and is refundable when you send your core to us and it is verified to be a rebuildable core. (Part No: 12522R)
$157.71

Allis Chalmers D12 Fuel Line
Fuel Line
- This steel fuel line fits the following tractor models: B, C, CA, D10, and D12. It also fits the D14 auxiliary engine only, not the tractor. It replaces the OEM part numbers 70215478 and 70207278. You may need to trim to fit your tractor. (Part No: 70243108)
$31.80

Allis Chalmers D12 Fuel Sediment Bowl Gasket
Fuel Sediment Bowl Gasket
- Gasket, Sediment Bowl. 2 inch outside diameter. Used on Allis Chalmers B, C, CA, D10, D12, D14, (D15 Gas To Serial Number 9001), (D17 Gas to serial Number 42000), (D19 Gas To serial Number 12000), G, I40, I400, I60, I600, 170, 175, 180, IB, RC, WC, WD, WD45, WF. Replaces original part numbers 208362, 70208362. Gasket may be rubber or cork, depending on availability. (Part No: NAA9160A)
$1.95

Allis Chalmers D12 Fuel Tank Cap
Fuel Tank Cap
- For Tractor Models B, C, CA, G, IB, RC, WD, D10, D12, D14, D15, D17, D19, I40, I400, I60, WC, WF, WD45, 170, 175, 180, 185, Backhoe: I600. Replaces: 253690, 70253690. This is a Non-Vented Cap. 7/8 inch outside diameter, 2 11/16 inch inside diameter, 1/4 inch high. Zinc Finish. 1.850 inches edge of tang to edge of tang. (Part No: D5NN9030A)
$5.81

Allis Chalmers D12 Sediment Bowl
Sediment Bowl
- Small Bowl, 2 outlet type. A 1/8 Inch Pipe Plug will be needed if only one outlet is used. For Models: D10, D12, WC, WD, WD45, D15D, D17, D19, D21, 180, 170 diesel. (Part No: 70239167)
$19.71

Allis Chalmers D12 Sediment Bowl Gasket and Screen
Sediment Bowl Gasket and Screen
- This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 208325, 208363, 70208325, 70208363 (Part No: 49923D)
$3.09

Allis Chalmers D12 Throttle Lever Knob
Throttle Lever Knob
- For tractor models CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. (Part No: 220901)
$7.35

Allis Chalmers D12 Carburetor Elbow & Strainer
Carburetor Elbow & Strainer
- Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$4.83



Allis Chalmers D12 Choke Cable
Choke Cable
- Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Allis Chalmers D12 Fuel Filter, In-Line, 1\4 inch
Fuel Filter, In-Line, 1/4 inch
- Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Part No: 6511393)
$4.86

Allis Chalmers D12 Fuel Filter, In-Line, 3\8 inch
Fuel Filter, In-Line, 3/8 inch
- Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Part No: BF836)
$4.79

Allis Chalmers D12 Fuel Filter, In-Line, 5\16 inch
Fuel Filter, In-Line, 5/16 inch
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. (Part No: BF840)
$4.14

Allis Chalmers D12 Fuel Filter, In-Line, 5\16 inch, Clear
Fuel Filter, In-Line, 5/16 inch, Clear
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.36

Allis Chalmers D12 Fuel Tank Liner
Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$33.23

Allis Chalmers D12 Fuel Tank Liner Kit
Fuel Tank Liner Kit
- Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$56.83

Allis Chalmers D12 Fuel Tank Repair Kit
Fuel Tank Repair Kit
- Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4 inches long and holes up to 3/8 inches in diameter. NOT for plastic fuel tanks. (Part No: FTR180)
$21.14

Allis Chalmers D12 Fuel Tank Screen
Fuel Tank Screen
- This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Part No: R7949)
$9.00

Allis Chalmers D12 Fuel Tank Webbing, 3 Ft
Fuel Tank Webbing, 3 Ft
- Black woven nylon type material, .042 inches thick, 3 foot section. (Part No: FTW494)
$4.13

Allis Chalmers D12 Lucas Fuel Treatment (quart)
Lucas Fuel Treatment (quart)
- Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$12.80

Allis Chalmers D12 Marvel-Schebler Service Manual
Marvel-Schebler Service Manual
- This Service manual is a complete manual for all DLTX and TSX model carburetors. Comes with tractor carburetor principle of operation and overhaul step-by-step instructions. 21 Pages. (Part No: MAR_CARB_SV)
$9.95

Allis Chalmers D12 Sediment Bowl Gasket, 2-1\8 inch
Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.20

Allis Chalmers D12 Stop Cable
Stop Cable
- This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Part No: PTSTOP)
$7.79

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Fuel System / Air Intake

[Categories]   [All D12 Parts]   [All Allis Chalmers Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2019 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy