Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers C Parts

Category: Lights

[Categories]   [All C Parts]   [All Allis Chalmers Models]  


Allis Chalmers C Bullet Tail Light
Bullet Tail Light
- This Bullet style Tail Light is for models B, C, CA, G, WD, WD45, D10, D12, D14, D15. Bullet Tail Light. 6 Volt with Glass Lense. Also available in 12 Volt, order PART R4383 Instead. (Part No: R4384)
$44.63

Allis Chalmers C Bullet Tail Light - 12 Volt
Bullet Tail Light - 12 Volt
- For B, C, CA, G, WD, WD45, D10, D12, D15. Bullet Tail Light. 12 volt with glass lens. Also available in 6 volt, order part number R4384 instead. (Part No: R4383)
$49.68

Allis Chalmers C Headlight Gasket
Headlight Gasket
- This Headlight Gasket is used on original Tear Drop headlights. It is rubber and comes with staple, like the original. Replaces 53527D, AA3239R (Part No: 53527D)
$3.53

Allis Chalmers C Headlight, 6 Volt
Headlight, 6 Volt
- This 6 Volt headlight measures 4 3/4 inch diameter and has a 1/2 inch diameter stud for mounting. Single wire light. May come black or gray. For B, C, CA, G, D10, D12, D14. Headlight. This is a radiator mount for the D10, D12 and D14. For 12 Volt, order R4003 bulb. Replaces OEM numbers 210921, 210922, 70210921, 70210922. (Part No: R3997)
$48.30

Allis Chalmers C LED Lamp, 12 Volt
LED Lamp, 12 Volt
- This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Used on Allis Chalmers Combines: A, C, E, EIII, F, K, L, L2, M, M2. Tractors : D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 5040, 5050, 6040, 6060, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: L4411LED)
$48.10

Allis Chalmers C Light Switch - 3 Position
Light Switch - 3 Position
- Fits B, C, CA, G, IB, RC, WC, WD, WD45, WF. Can be used to replace OEM number 70227233. (Part No: 70208197)
$29.91



Allis Chalmers C Bulb, 12V, 5W, BAY15D Base
Bulb, 12V, 5W, BAY15D Base
- This Stop/Tail light Bulb is 12 Volts, 5 Watts with a BAY15D Base. It replaces: (Allis Chalmers 70928348, 72010038), (Ford / New Holland 81AG13464AA, 839336590), (Massey Ferguson 908543D1, 908543M1), International 14144690, Lucas 380, Neglin 11437, Osram 7528, Phillips 12499, Splendor 8510, Tifra 3351, Toplamp 265. (Part No: S.5074)
$0.77

Allis Chalmers C Bulb, Side \ Indicator 12V, 21W, BA15S Base
Bulb, Side / Indicator 12V, 21W, BA15S Base
- This Side / Indicator Bulb is 12 Volt, 21 Watts with a BA15S Base. It replaces 81781C1, A41264, A42295, B50218, L32258, 1-9065, 22-667, 3025210R91, 7797137, 9417866, A40855, 376902A1, 87720314, 80529068, 9970121, BN300874, SBA385120280, SFD019065, C3DB13465A, 81AG13466AA, 83BG13466AA, 83948319, 83918332, 1271735C1, AF1638, B1SB1156, LF522, LF522J, VLC0382, W164178A, 1018729M1, 14148190, 2300969, 529068, 621235D1, 621235M1, 72010005, 72097583, 81AG13466AA, 83933658, SW01855, 70251859, 71164984, Lucas 382, Neglin 13092, Osram 7506, Philips 12498, Philips 12498LLB2, Splendor 9042, Tifra 381, Toplamp 264. (Part No: S.5079)
$0.72

Allis Chalmers C Fender and Cab Warning Light
Fender and Cab Warning Light
- Super bright, this 4-1/4 inch diameter warning light has 48 LED x 1 W (48 Watts) diodes (24 per side). This is a double sided light and works with 12-30 volts. Features water dust resistance rating ip67. It has an aluminium body with mounting stud that is 1/2 inch diameter x 1-7/8 inches long. Includes washers and nut. Polycarbonate Lens. This light requires a flasher unit. If you need a flasher, order part number LED90. (Part No: 28A43)
$50.37

Allis Chalmers C Halogen Work Light-Double Bulb
Halogen Work Light-Double Bulb
- 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$51.42

Allis Chalmers C Implement Lights Socket, 7 Pin
Implement Lights Socket, 7 Pin
- Used across many brands of North American produced equipment, this 7 pin light socket features a metal housing. It replaces manufacturer part numbers 70269642, 30-3130576, 3715923M91, 73764, AR75695, A145795, A177539, A67470, E4NN13N426BA, V60345, 121645C1, 22-789, 30-3130576, 3121645C1, 3666764M1, 3713127M1, 3715923M91, 402431A2, 70269642, 737641, 82001021, 84117C1, 87451540 (Part No: 5407S)
$18.08

Allis Chalmers C LED Combination Flash and Turn Lamp
LED Combination Flash and Turn Lamp
- With many applications, this light is a replacement for OEM numbers 92185C1, 216044C91, 216044C92, 92260C1, 130882C91, 107324C91, V93104, V77050, 9706415, 86014019, 86023276, 86016518, 86012669, 87053368, 83977683. It can also be used as a universal warning / turn signal light. The lamp measures in inches 3 1/8 inches tall and 6 3/4 wide. The mounting holes are 5 3/4 inches center to center. Works for 12-24 volts. This is a 2 wire unit. Black wire is ground, Red wire is power. This light does not flash without an external flasher unit. If needed, order LED90. (Part No: WL3630)
$45.47

Allis Chalmers C LED Flasher
LED Flasher
- Only needed when typical flasher will not operate LED warning lights due to the lack of power draw and low resistance which is required to make lights flash. Unit flashes 50 time per minute. Voltage 12V. Amperage 0.05A -10A. Used with LED Warning lights: WL3630, WL6025, 28A43, 28A44. (Part No: LED90)
$12.87

Allis Chalmers C LED Warning \ Turn Signal Light
LED Warning / Turn Signal Light
- While this part replaces many Original Equipment Manufacture's part numbers, including 20-1950T91, 22-665, 22-665T1, 586743M91, 586743M92, 592544, 60-6246T1, 70577137, 72160876, 72160876, 72160876, A187626, AR60250, this LED lamp can also be used as a universal light. Using e LED lights, it measures 7-3/4 inches in length, 2 inches high, with 7 inch center-to-center mounting holes. It is 1-1/2 inches deep. It operates in a 10-30 Volt range. Used in Negative ground systems (black wire is the ground), this lamp features an ABS housing and is IP67 waterproof and shock proof rated. This light will outlast conventional incandescent lamps with a 50000 hours expected lifetime. The operating temperature is -40 to 140 degrees Fahrenheit. No bulbs or ballast to replace. Requires LED90 Flasher Unit to make it flash (sold separately). (Part No: WL6025)
$47.61

Allis Chalmers C Light Switch with Knob
Light Switch with Knob
- Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$14.67

Allis Chalmers C Magnetic worklight Universal Mounting.
Magnetic worklight Universal Mounting.
- Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Allis Chalmers C Portable Halogen Work Lamp
Portable Halogen Work Lamp
- 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

Allis Chalmers C Red Lens Tail Lamp
Red Lens Tail Lamp
- Lamp complete with bulb. Tail light assembly, 4-1/2 inch diameter red lens, body includes license lamp window. 12 volt. 1-7/8 inch mounting bolt spacing. This is a universal part and not listed for specific applications. Verify measurements before ordering. Serviceable replacement for the following OEM numbers 10A24895, 121846C91, 155005A, 162009AS, 30-3393747, 35A3316, 370306R91, 370716R91, 376850R91, 379789R91, 404418R1, 45645HA, 602603AS, 967696R92, A36831 (Part No: L428-12V)
$15.74

Allis Chalmers C Safety Light Amber
Safety Light Amber
- 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. (Part No: S.61357)
$12.56

Allis Chalmers C Tail Lamp
Tail Lamp
- There is no reason that this can't be used for your tractor if you need tail lights. This Round tail light is 4 inches around, with 2 1/2 inch center to center mounting holes. It is 1 1/2 inces deep and has 2 wire. If you need this light as a warning light or turn signal, order LED90 to go with it. This part is for 12 volt systems. (Part No: 131183C91)
$38.75

Allis Chalmers C Warning Light, Red LED
Warning Light, Red LED
- Be seen with this universal Red LED Warning light! This is a Super Bright LED featuring 25 diodes per side. It is for 12 Volt Systems. The 3 Wires are White-Ground, Black-Low Brightness and Red-High Brightness. The Lens Size is 4.000 inches. The lens is Acrylic and the body is metal. Nuts and Washers are included. This lamp can blink by using part number LED90 (not included). (Part No: 28A44)
$52.87

Allis Chalmers C Work Lamp, HID, Flood Light
Work Lamp, HID, Flood Light
- Universal high intensity discharge flood light, 35 watt Xenon H3 lamp, size 4.725 inch width X 4.330 inch height X 5.512 inch length, internal ballast, hardened glass lens, far longer life span than halogen. 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$127.64

Allis Chalmers C Work Light 12V
Work Light 12V
- Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Allis Chalmers C Worklight 12 Volt
Worklight 12 Volt
- Red 12 Volt worklight with handle, on/off switch, swivels and rotates. (Part No: S.42792)
$32.03

Allis Chalmers C Worklight 12 Volt Black
Worklight 12 Volt Black
- 12 Volt worklight with handle, on/off switch, swivels and rotates. Mounting holes measure 4 3/8 inch center to center. (Part No: S.67771)
$33.56

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Lights

[Categories]   [All C Parts]   [All Allis Chalmers Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2019 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy