Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers 200 Parts

Category: Gauges

[Categories]   [All 200 Parts]   [All Allis Chalmers Models]  


Allis Chalmers 200 Amp Gauge
Amp Gauge
- This amp gauge has the "Allis-Chalmers" logo printed on the face. It fits the following tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, 160, 170, 175, 180, 190, 190XT, 200, 210, 220. It is meant to be used on systems that have been converted to 12 volts. It has a white face, chrome bezel, and it reads 60-0-60. (Part No: ACS1833)
$29.25

Allis Chalmers 200 Dash Light with 12V Bulb
Dash Light with 12V Bulb
- Used on the following Allis Chamlers modles: D10, D12, D14, D15, D17, D19, D21, I40, I400, I60, I600, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, this Dash Light replaces OEM part numbers 229203, 230247, 234404, 70229203, 70230247, 70234404. This part has a 0.658 inch socket diameter, 1 inch center to center on mounting holes and a Chrome finish. (Part No: 70234404)
$38.96

Allis Chalmers 200 Dash Warning Light
Dash Warning Light
- Know when you oil pressure is low with this Dash Warning Light. This is a 12 - volt light with red dome. It is 2.191 inches over all length, with 0.675 inch outside diameter threads. 2 Spade Terminals. Used on Allis Chalmers D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces part numbers 240837, 240838, 240869, 276390, 70240837, 70240838, 70240869, 70276390 (Part No: 240837)
$28.79

Allis Chalmers 200 Oil Pressure Switch
Oil Pressure Switch
- Know if you lose oil pressure when it happens. This switch is used with 240837 Dash Warning Light. This switch is used on Allis Chalmers models: D21, 180, 185, 190, 190XT, 200, 210, 220, 4W305, 7000, 7030, 7040, 7050, 7060, 7080. Replaces Allis Chalmers part numbers 74020666, 74021445 (Part No: 74021445)
$27.49

Allis Chalmers 200 Proofmeter Drive Assembly
Proofmeter Drive Assembly
- With Cover, 2 gears, 2 gaskets. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, D21 Has 12 and 45 teeth. Replaces original part numbers 246764, 70246764. (Part No: 720046764)
$39.41

No
Picture
Tachometer
- Tach drive runs off the alternator. For tractor models (190 from serial number 20600 and up), 190XT, 200. Replaces 70255036. (Part No: 70252409)
$162.90



Allis Chalmers 200 Ammeter Gauge
Ammeter Gauge
- 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$3.08

Allis Chalmers 200 Hourmeter
Hourmeter
- DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

Allis Chalmers 200 Hourmeter, Analog
Hourmeter, Analog
- 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Allis Chalmers 200 Oil Gauge Copper Line Kit
Oil Gauge Copper Line Kit
- Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch -24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

Allis Chalmers 200 Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.96

Allis Chalmers 200 Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Part No: IHS626)
$15.38

Allis Chalmers 200 Oil Pressure Gauge
Oil Pressure Gauge
- Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.88

Allis Chalmers 200 Temperature Gauge
Temperature Gauge
- Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.27

Allis Chalmers 200 Temperature Gauge, Universal
Temperature Gauge, Universal
- For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.68

Allis Chalmers 200 Temperature Gauge, Universal
Temperature Gauge, Universal
- Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.37

Allis Chalmers 200 Voltmeter, 12 Volt, Lighted Dial
Voltmeter, 12 Volt, Lighted Dial
- Voltmeter-Gauge has 8 volt to 16 volt range, lighted dial, fits 2 inch diameter hole. For tractors that use 12 volt electrical system. Chrome bezel with black background, white letters and white pointer. (Part No: VOLT12LT)
$10.74

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Gauges

[Categories]   [All 200 Parts]   [All Allis Chalmers Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy