Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers 190XT Parts

[ Turn Off Pictures ]

[Categories]   [All Allis Chalmers Models]   [Print]  


Brakes
Allis Chalmers 190XT Brake Band
Brake Band
- Sold individually, 4 required per tractor. For tractor models 170, 175, 180, 185, 190, 190XT, 190XT III, (200 serial number less than 4000), (D17 serial number 42001 and above), D19, D21. Also replaces 70276940, 70235610, 70277438. (Part No: 70277379)
$36.00

Allis Chalmers 190XT Brake Drum
Brake Drum
- Also replaces 70235603. For tractor models 880 Cotton Picker, D19, 190 serial number before 21700, 190XT before serial number 21700. (Part No: 70277329)
$117.80

Allis Chalmers 190XT Brake Lining
Brake Lining
- Lining kit for disc brakes. Includes lining and rivets for one disc and one drum. Prior to serial number 21699. For 190, 190XT, D19, F, F2, L. 70252562, 70277200. (Part No: 70235628)
$33.75

Clutch
Allis Chalmers 190XT Clutch Kit
Clutch Kit
- This Tru-Power single clutch kit contains a re-manufactured, 12 inch pressure plate assembly, a re-manufactured, 12 inch, heavy duty, 10 spline, 6 pad, 1 inch hub clutch disc, new release bearing and new pilot bearing. For Tractors 190XT, 200. NO CORE CHARGE. (Part No: 70255689NC)
$418.61

No
Picture
PTO Clutch Separator Plate
- This PTO Clutch Separator Plate is for tractor models (180, 185 all use 6), (190, 190XT, 190XT III, 200 all use 8), (4W-220, 7045, 7060, 7080, 7580, 8050, 8070 all use 5), (4W-305, 8550 both use 7), (7000 use 3), (7010, 7020, 7030, 7040, 7050, 8010, 8030 all use 4). (Part No: 70265486)
$21.75

Allis Chalmers 190XT Power Director Clutch Plate
Power Director Clutch Plate
- Used on Allis Chalmers D15, D17, D19, D21, 170, 175 below serial number 5461, 180 below serial number 12800, 185 below serial number 12800, 190, 190XT, 190XT Series III, 200, and 7000. Replaces OEM numbers 70257672, 70261212 (Part No: 70261212)
$51.31

Allis Chalmers 190XT Release bearing
Release bearing
- For tractor models 180, 185, 190, 190XT, 200, C, CA, D10 (serial number 3501 and below), D12 (serial number 3001 and below), D14, D15, D17 (serial number 75000 and below), D19, H3 (with 149 engine). Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Replaces: 211273, 235079, 70211273, 70235079. (Part No: N1087)
$17.93

Cooling System
No
Picture
Engine Block Heater
- For tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010. (Part No: S.70745)
$64.85

Allis Chalmers 190XT Fan Blade, 5 Blade
Fan Blade, 5 Blade
- 18-1/2 inches in diameter, 1-1/2 inch pilot hole, mounting holes on 2 inch centers. For tractor models 180, 185, 190, 190XT. (Part No: 70255751)
$159.65

Allis Chalmers 190XT Oil Cooler
Oil Cooler
- Core size 6 inches high, 19.75 inches wide. For tractor models (185 up to serial number 14553), 190, 190XT, 200, 210, 220. (Part No: 70272180)
$295.86

Allis Chalmers 190XT Radiator
Radiator
- Fits 190, 190XT, 190XT III. Core size: 23.00 inches wide, 18.25 inches high, 5 rows of tubes 7 Fins per Inch. (Part No: 70250729)
$491.70

Allis Chalmers 190XT Radiator Cap, Pressurized
Radiator Cap, Pressurized
- This 4 pound pressurized cap is for tractor models using a pressurized cap: Late B, C, CA, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 70228545, 70228722, 70228817, 70254891. (Part No: 70254891)
$6.75

Allis Chalmers 190XT Radiator Hose Lower
Radiator Hose Lower
- This lower radiator hose has an inside diameter at one end of 2 1/8 inches and an inside diameter at 1 3/4 inches. For 180, 185, 190, 190XT (Part No: 70248233)
$11.99

Allis Chalmers 190XT Radiator Hose Upper
Radiator Hose Upper
- Our new upper radiator hose has an an inside diameter of 1.75 inches on the smaller side and 2.12 inches on the larger side. For tractor models 180, 185, 190, 190XT, (Part No: 70243014)
$14.69

Allis Chalmers 190XT Radiator Hose, Lower
Radiator Hose, Lower
- A = 1.690 inches, B = 2.125 inches. For tractor models (190 serial number up to 14449), 190XT, (190XT III serial number up to 14450). (Part No: 70243015)
$13.49

Allis Chalmers 190XT Thermostat
Thermostat
- For tractor models 180, 185, 190, 190XT, 190XT III, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 860, 880, (D17 serial number 119938 and up), (D19 diesel), D21. Replaces 74025103. (Part No: EAF8575BWG)
$9.14

Allis Chalmers 190XT Water Pump
Water Pump
- Water Pump for gas or diesel engines, with hub and inlet and outlet gaskets, (o-ring for early models not included). This pump is for tractors with a steel line that screws into pump housing with 7/8 inch 18 thread. For 180, 185, 190, 190XT, D21. (Part No: 74007554)
$96.46

Decals and Emblems
No
Picture
Crop Hustler Decals
- One pair. For tractor models 170, 175, 180, 185, 190, 190XT, 200. (Part No: R0672)
$24.74

Allis Chalmers 190XT Decal Set
Decal Set
- HOOD Decal Set for Allis Chalmers Model 190XT. (Part No: R4034)
$37.01

No
Picture
Decal Set
- COMPLETE Decal Set for Allis Chalmers Model "One-Ninety XT" only. Creme background with Black lettering. If you are ordering for a Diesel, you need to add 2 pieces of R0670. (Part No: R2624)
$194.48

No
Picture
Diesel Decal
- Individual decal, black lettering on creme. For tractor models 160, 170, 180, 190, 190XT, 210, 220. (Part No: R0670)
$13.02

No
Picture
Diesel Decal
- Individual, creme lettering on black. For Models: 160, 170, 175, 180, 185, 190, 190XT, 200. (Part No: R0671)
$13.02

No
Picture
Landhandler Decals
- One pair. For tractor models 170, 180, 190, 190XT, 210, 220. (Part No: R0673)
$24.74

Drive Train
No
Picture
Bearing Cone
- Rear axle outer cone, Timken number 29685. For tractor models 190, 190XT, D17. (Part No: 70057006)
$41.17

Allis Chalmers 190XT Bearing Cup
Bearing Cup
- Rear axle outer cup, Timken number 29620. For tractor models 190, 190XT, D17. (Part No: 70057005)
$23.62

Allis Chalmers 190XT Bearing Cup
Bearing Cup
- Rear axle inner cup, Timken number 3920. For tractor models 190, 190XT, D17. (Part No: 70202584)
$14.89

Allis Chalmers 190XT Coupling
Coupling
- For 180, 185, 190, 190XT, 200. Coupling can be used with 70246529 Gear. (Part No: 70261442)
$91.18

Allis Chalmers 190XT Gear Collar, 3rd & 4th
Gear Collar, 3rd & 4th
- 15 outer teeth, 12 inner teeth, .838 inch wide. For tractor models 190XT, 190XT III, (200 serial number 4001 and up). (Part No: 70257033)
$98.12

Allis Chalmers 190XT Gear Shift Lever Pins
Gear Shift Lever Pins
- These Standard Gear Shift Lever Pins are 0.325 inches wide on the square end and 0.250 inch round pin diameter. Fits B, C, CA, G, WD, WD45, 190XT, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070; Replaces: 203465, 70203465. Price is for two. (Part No: 70203465)
$13.26

Allis Chalmers 190XT REVERSE GEAR
REVERSE GEAR
- For D17, 180, 185, 190, 190XT, 200, (170, 175 without shutle clutch). Reverse Gear. (Part No: 70232529)
$151.57

Allis Chalmers 190XT Second Gear
Second Gear
- For tractor models 180, 185, 190, 190XT, 200. Second Gear. (Part No: 70246531)
$174.21

Allis Chalmers 190XT Shift Fork, 3rd And 4th
Shift Fork, 3rd And 4th
- This new 3rd And 4th Shift Fork fits Allis Chalmers 180, 185, (190 and 190XT (serial number 9001 & up), 200; Replaces: 246556, 261385, 70261385 (Part No: 70261385)
$62.10

Allis Chalmers 190XT Sliding Gear Transmission Mainshaft
Sliding Gear Transmission Mainshaft
- For tractor models 180, 185, 190, 190XT, 200. Sliding Gear Transmission Mainshaft. (Part No: 70246535)
$178.88

Allis Chalmers 190XT Third Gear
Third Gear
- For tractor models 180, 185, 190, 190XT, 200. Third Gear. (Part No: 70246529)
$132.44

Allis Chalmers 190XT Third Gear Transmission Countershaft
Third Gear Transmission Countershaft
- For tractor models 180, 185, 200, (190, 190XT serial number above 9001). (Part No: 70246543)
$134.00

Allis Chalmers 190XT Transmission Input Shaft
Transmission Input Shaft
- For tractor models 180, 185, 200, 190XT, (190 serial number 9001 and up). Transmission Input Shaft. (Part No: 70256571)
$138.00

No
Picture
Transmission Main Splined Collar
- For 180, 185, 200, (190, 190XT serial number 9001 and up). Transmission Main Splined Collar. (Part No: 70246532)
$99.11

Electrical System
Allis Chalmers 190XT Alternator
Alternator
- Remanufactured external regulator, 12 volt, 61 Amp. Use repair kit ARK-1. For 160, 190, 190XT, D21 (Part No: 1100883)
$136.72

Allis Chalmers 190XT Alternator with Tach Drive
Alternator with Tach Drive
- This is a 12 volt 63 amp alternator. It is internally regulated and comes with fan and pulley. This alternator can be used to replace original generator. Additional brackets and hardware may be needed. NOTE, for Allis Chalmers application, the tach drive needs to be replaced with part number 720046764 to have the correct gear ratio. Use part number ADR9209 to make this a single wire self exciting alternator (not included). Replaces 02453306, 90048463 (Part No: ADR0382)
$106.24

Allis Chalmers 190XT Distributor Dust Cap
Distributor Dust Cap
- Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Part No: 1960325)
$24.81

No
Picture
Distributor, Rebuilt
- Complete remanufactured distributor for 190 and 190 XT tractors with Delco Distributor 1111311, 74022922. A refundable $80.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Also NOTE: Note that if the core is not a complete and good core, part or all of the core charge will not be refunded. Typically, most cores need a shaft replacement and the cost of the shaft will be deducted from the core charge. This is usually $30. (Part No: 1111311)
$151.71

No
Picture
Distributor, Rebuilt
- Complete remanufactured distributor for Allis Chalmers 180, 190 and 190XT Delco distributor 1112668. Allis Chalmers original part number 74022922. A refundable $80.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Also NOTE: Note that if the core is not a complete and good core, part or all of the core charge will not be refunded. Typically, most cores need a shaft replacement and the cost of the shaft will be deducted from the core charge. This is usually $30 (Part No: 1112668)
$157.71

Allis Chalmers 190XT Electronic Ignition Conversion Kit, 12 Volt Negative Ground
Electronic Ignition Conversion Kit, 12 Volt Negative Ground
- Replaces points & condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fule economy. For 12 Volt Negative Ground systems only. For Delco 1112624, 1112466, 1112682, 1112687. Tractor models D19, 180, 185, 190 and 190XT. (Part No: 1163A)
$88.51

No
Picture
Flasher Unit
- 12 volt, round, 2 terminal, 4 light max. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5045, 5050, 6040, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8550, D21. (Part No: 70248109)
$3.96

Allis Chalmers 190XT Fuse Holder
Fuse Holder
- Mounts on 5/8 inch diameter hole. 2 spade connectors. Replaces 230246, 70230246 (Part No: 376852R91)
$6.83

Allis Chalmers 190XT Key Switch
Key Switch
- 5 terminal, 3 position, with keys. For tractor models 170, (D15 from serial number 9001 and up with Indak switch), (D17 from serial number 75001 and up), 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces 241965. (Part No: 233759)
$29.31

Allis Chalmers 190XT Light Switch
Light Switch
- For tractor models 160, 170, 175, 180, 185, 190, (190XT from serial number 19001 and up), 200, 210, 220, 6040. Replaces 70249142, 70249142V, 249142 (Part No: 249142)
$17.73

Allis Chalmers 190XT Light Switch Plate
Light Switch Plate
- For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6040. (Part No: 249141)
$18.60

Allis Chalmers 190XT Neutral Starting Switch
Neutral Starting Switch
- This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on Allis Chalmers models: 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 4W220, 4W305, 616, 5040, 5045, 5050, 6040, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Part No: AH98872)
$31.99

Allis Chalmers 190XT Solenoid, 12 Volt
Solenoid, 12 Volt
- Starter solenoid, diesel, 12-volt. For tractor models 180, 185, 190, 200, 7000, 7020, (D17 diesel using Delco 1113082). Exception: NOT for use on Delco Starter 1107859. Replaces Delco number 1115510 or OEM numbers 1028587M91, 159711AS, 65479C2 and R11292, 231264, 243828, 231835, 70243828, 79017977. (Part No: 1115510)
$15.84

Allis Chalmers 190XT Solenoid, 12 Volt
Solenoid, 12 Volt
- Starter solenoid, 12-volt. Services Allis starter 273902/Lucas starter 26363, Allis starter 256898/Lucas starter 26435. For 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, 7010, 7020, 8010 (Part No: 70272330)
$20.00

No
Picture
Starter
- This new starter for Diesel models 180, 190, 190XT, 7000, 7010, 7020, 8010, and Gleaner models F, G, L, M. (Part No: 1113657NEW)
$513.02

No
Picture
Starter
- For tractor models TL 545 Gas Loader 1965, D21 Gas 1967-68, 180 1964-72, 190 and 190XT both with Gas 1965. REBUILT Starter. 12 Volt. No exchange. Replaces 1108416. (Part No: 1107356)
$287.04

Allis Chalmers 190XT Starter Assembly, Diesel Engine
Starter Assembly, Diesel Engine
- New Lucas style 12V starter assembly with solenoid (Replaces 273902), for tractors: 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, 7010, 7020, 8010. With diesel engines. (Part No: 70273901)
$335.80

Allis Chalmers 190XT Starter Drive
Starter Drive
- Starter drive, gas, remanufactured. Used on Allis starter number 0242136. To serial number 17000. For tractor models 180, 190, 190XT, G. (Part No: 70243856)
$41.12

Allis Chalmers 190XT Starter Drive
Starter Drive
- Remanufactured Starter Drive - D17 (to serial number 38963 with diesel engine). Models: 170, 180, 185, 190, 190XT, 200, 7000. (Part No: 70252044)
$38.80

Allis Chalmers 190XT Starter Drive
Starter Drive
- For D17 with Diesel Engine serial number up to 38964, (F, G, L all combine with Diesel Engine), (180, 185, 190, 190XT all with Diesel Engine. Starter Drive. 10 Teeth. (Part No: 1941157)
$32.69

No
Picture
Starter, Rebuilt
- For tractor models 180, 185, 190, 190XT all with diesel engines and Delco starter.``Add $90.00 core charge to price (will be added after order is placed when ordering online) - you will receive instructions for returning your core for a refund if you have one available. (Part No: 1113657)
$332.44

Allis Chalmers 190XT Switch, Push Button
Switch, Push Button
- This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch, number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch and manifold heater switch. Replaces: 227029, 240962, 242988, 245866, 245936, 253322, 70253322, 71191589, 72160068. (Part No: R7994)
$11.25

Allis Chalmers 190XT Voltage Regulator
Voltage Regulator
- Voltage regulator, 12-volt. For Allis Chalmers tractors using Delco alternators Following Delco Alternators: 1100553, 1100557, 1100558, 1100566, 1100567, 1100568, 1100569, 1100570, 1100572, 1100590, 1100591, 1100662, 1100742, 1100750, 1100751, 1100778, 1100780, 1100787, 1100790, 1100791, 1100796, 1100797, 1100804, 1100810, 1100816, 1100817, 1100818, 1100834, 1100836, 1100837, 1100838, 1100839, 1100842, 1100843, 1100845, 1100846, 1100847, 1100849, 1100851, 1100856, 1100860, 1100870, 1100871, 1100875, 1100879, 1100883, 1100885, 1100886, 1100888, 1100889, 1100891, 1100892, 1100893, 1100895, 1100896, 1100905, 1100907, 1100908, 1100910, 1100916, 1100917, 1100921, 1100931, 1100932, 1100933, 1100939, 1100943, 1100944, 1100951, 1102943, 1102944, 1102945, 1119507. Replaces: 243986, 70243986, 72072955 (Part No: 1031060M91)
$11.88

No
Picture
Voltage Regulator, 12 Volt
- For tractor models D21, 190XT, 160, 170, 175, 180, 185, 190, 200. Replaces 1100822, 1100710. (Part No: 581710)
$23.24

Engine Bearings
No
Picture
Cam Bushing Set
- For tractor models (6060, 6080 with D2200 diesel), (801 Cotton Picker, 860, 180, 185, 190, with 301 CID diesel 2800 series engine), (TL-345B, TL-545, 545, 190, 190XT, 190XT III, 200, 7000, with 301 CID diesel 2900 series engine), 7010, 7020, 8010. Replaces 74025025, 74025238. (Part No: CB2800)
$38.21

No
Picture
Main Bearing Set
- For tractor models 180, 185, 190, all with 2800 Series Engine. For tractor models 190XT, 200, 7000 with 2900 Series Diesel Engine. All with 301 CID 6 cylinder. Available in standard and .010. (Part No: MBK190XT)
$153.64

Allis Chalmers 190XT Rod Bearing Set
Rod Bearing Set
- For tractor models 180, 185, 190, all with 2800 series engine. For 190XT, 200, 7000 with 2900 series diesel engine. For 7010, 7020, 8010, all with 649I-649T series engine. All with 301 CID 6 cylinder. Connecting Rod Bearing Set (3). Available in standard, .010 and .020. (Part No: CRK190XT)
$74.35

Engine Gaskets
Allis Chalmers 190XT Front Crankshaft Seal
Front Crankshaft Seal
- This Front Crankshaft / Timing Cover Seal, is used on Allis Chalmers D2200, 2800 and 2900 Series Diesel Engines. It has a 3.005 inch outside diameter, 0.312 inch width and is for a 1.875 inch shaft size. It replaces Chicago Rawhide CR18823; National 473239 Allis Chalmers 74024561, 74024561V (Part No: 74024561)
$27.78

Allis Chalmers 190XT Head Gasket
Head Gasket
- For Allis Chalmers G2500, G2800, D2800, D2900 Engines. Tractor models 180, 190, 190XT, 185, 200, 7000, 7010, 7020 and 8010. (Part No: 74007790)
$72.80

No
Picture
Head Gasket Set
- For tractor models 180, 185, 190, all with 2800 Series Engine. For 190XT, 200, 7000 with 2900 Series Diesel Engine. For 7010, 7020, 8010, all with 649I-649T Series Engine. All with 301 CID 6 cylinder. (Upper gasket set with head gasket). (Part No: VGK6894D)
$145.19

Allis Chalmers 190XT Lower Gasket Set
Lower Gasket Set
- No front or rear seal included For 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010 All with D301 6-Cylinder Diesel and D301T 6-Cylinder Turbo Diesel Engine (Part No: 51-5056)
$110.40

No
Picture
Rear Crank Seal
- Rear Crankshaft Seal. For 301 CID 6 cylinder 6491-649T series diesel engines. 3-7/8 inch standard bore, 30 degree exhaust valve face angle. For tractors: 7010, 7020, 8010. For 170, 180, 185, 190, D17, D19, D21. (Part No: BS219)
$42.37

No
Picture
Rear Main Seal
- For tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020 with 301 Diesel Engine. (Part No: SS64550)
$51.75

Allis Chalmers 190XT Valve Cover Gasket
Valve Cover Gasket
- For tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020 with 301 Diesel Engine. Replaces original part numbers 74008074, 4008074. (Part No: 74008074)
$16.93

Engine Rebuild Kits
No
Picture
Basic Overhaul Kit
- Basic Engine Kit with Standard Bearings. For 301 CID 6 cylinder, 3-7/8 inch standard bore, 30 degree exhaust valve face angle. 2800 series engine, 2900 series diesel engine. Kit contains: sleeves, pistons and rings, pins and retainers, pin bushings, rod bearings, main bearings and gasket set. For tractor models 180, 185, 190, 190XT. (Part No: BEKA1190XT)
$1338.02

No
Picture
Basic Overhaul Kit
- Basic Engine Kit. For 301 CID 6 cylinder, 3-7/8 inch standard bore, 30 degree exhaust valve face angle. 2800 series engine, 2900 series diesel engine. Kit contains: sleeves, pistons and rings, pins and retainers, pin bushings and gasket set. For tractor models 180, 185, 190, 190XT. (Part No: BEKA1190XT-LCB)
$1135.52

Allis Chalmers 190XT Engine Overhaul Kit
Engine Overhaul Kit
- For AC 180, 185, 190, with 2800 series engine. 190XT with 2900 series diesel engine (301 CID 6-cylinder). Contains Sleeve and Piston Kit (sleeves, pistons, pins, retainers, top chrome and oil control ring set, standard bore from 3-7/8 inch). Piston Pin Bushings. Valve Grinding Gasket Set. Lower Gasket Set. Rear Crankshaft Seal (Deos not include front seal). Main Bearing Kit. Connecting Rod Bearing Kit. Valve Parts (intake and exhaust valves, springs, guides and keys). Available with standard, .010 or .020 bearings. Valves are 30 Degree face angle. Replaces 4023379 older 45 degree exhaust valves. Requires replacement of seats. (Part No: EOK1190XT)
$1689.09

No
Picture
Overhaul Kit
- Engine Overhaul Kit. For 301 CID 6 cylinder, 3-7/8 inch standard bore, 30 degree exhaust valve face angle. 2800 series engine, 2900 series diesel engine. Kit contains: sleeve and piston kit, bushings, rear crankshaft seal (does not include the front), and valves. For tractors: 180, 185, 190, 190XT. (Part No: EOK1190XT-LCB)
$1354.44

No
Picture
Overhaul Kit
- 3 7/8 inch bore. For tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020 with 301 Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R3316-OHK)
$1374.19

Engine Parts
No
Picture
Flywheel Ring Gear
- This Flywheel Ring Gear has 114 Teeth. It is used on Allis-Chalmers Diesel Models: 185, 190, 190XT, 200, 7000, 7010, 7020, 8010. Also used on the following Gleaner Models: F, F2 with 649 (D2800/D2900) Diesel Engine, G Diesel, L with 649 (D2800/D2900) Diesel Engine, L2 with 649 (D2800/D2900) Diesel Engine, L3 with 649 (D2800/D2900) Diesel Engine, M, M2, M3, MH with 649 (D2800/D2900) Diesel Engine, MH2 with 649 (D2800/D2900) Diesel Engine, MH3 with 649 (D2800/D2900) Diesel Engine. Replaces 74023904. (Part No: 74023904)
$136.62

Allis Chalmers 190XT Lifter, New
Lifter, New
- For tractor models 180, 185, (190, 190XT, 190XT III gas or diesel), 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7060, 7080, 7045, (7050 diesel). Replaces 74026699, 4026699, HC474026699 (Part No: 74026699_)
$21.26

Allis Chalmers 190XT Rocker Arm
Rocker Arm
- For tractor models (180, 185, 190, 190XT all diesel), 200, 210, 220, 4W220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 860, 880, D21. (Part No: 70277421)
$52.92

No
Picture
Valve Service Kit
- For tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 8010. Contains: springs, guides, locks, (no valves). (Part No: VSKA301)
$131.21

No
Picture
Valve, Exhaust Set of 2
- This pair of exhaust valves is for models 180, 185, 190, all with 2800 Series Engine. For 190XT, 200, 7000 with 2900 Series Diesel Engine. For 7010, 7020, 8010, all with 649I-649T Series engine. All with 301 CID 6 cylinder. Exhaust Valves Set of 2. 30 Degree face angle. Replaces 4023379 older 45 degree valves. Requires replacement of seats. (Part No: 74009936)
$29.77

No
Picture
Valve, Intake
- Intake valve for tractor models (180, 185, 190, all with 2800 Series Engine), (190XT, 200, 7000 with 2900 Series Diesel Engine), (7010, 7020, 8010, all with 649I-649T Series engine or 301 CID 6 cylinder). (Part No: 74023378)
$26.64

Engine Pistons and Sleeves
Allis Chalmers 190XT Pin Bushing
Pin Bushing
- Piston Pin Bushing. For 301 CID 6 cylinder 6491-649T series diesel engines. 3-7/8 inch standard bore, 30 degree exhaust valve face angle. For tractor models 7010, 7020, 8010. For 180, 185, 190, 190XT, D21. (Part No: 74020049)
$9.93

Allis Chalmers 190XT Piston and Sleeve Kit
Piston and Sleeve Kit
- This is a set of 6. For 200, 7000, both with 2900 series diesel engine. For 7010, 7020, 8010, all with 649I-649T series engine. All with 301 CID 6 cylinder. Piston and Sleeve Kit contains: sleeves, pistons, rings, pins and retainers for 3 7/8 inch standard bore. (Part No: PKA3010)
$866.67

No
Picture
Sleeve & Piston Kit
- For AC 180, 185, 190, with 2800 series engine. 190XT with 2900 series diesel engine (301 CID 6-cylinder). Sleeve and Piston kit includes sleeves, pistons, rings, pins and retainers for 3 7/8 inch standard bore. (Part No: PK190XT)
$937.71

Engine Rings
No
Picture
Piston Rings
- 3-7/8 inch bore, 18 compression rings at 3/32 inch, 6 oil rings at 3/16 inch. For Models: 180, 190, 190XT, 7000 Turbo. (Part No: 2C7174)
$236.24

Exhaust System
Allis Chalmers 190XT Exhaust Elbow
Exhaust Elbow
- For 190, 190XT, 200, Gleaners G, L2, M, M2. (Part No: R3207)
$93.83

No
Picture
Exhaust Manifold Gasket Set
- Manifold Gasket Set for Diesel engine on models G, L, L2, L3, M, M2, M3, 190XT, 200, 7000, 7010, 7020, 8010. Used for the R0280 manifold (OEM 74007652). (Part No: R0280G)
$27.00

No
Picture
Exhaust Manifold, Diesel
- For Diesels only on: G, L, L2, L3, M, M2, M3, 190XT, 200, 7000, 7010, 7020, 8010. Does not come with Gaskets. `` Gasket Set can be ordered separately as part number R0280G. Replaces OEM 74007652. (Part No: R0280)
$152.27

Allis Chalmers 190XT Extension Pipe
Extension Pipe
- Muffler, vertical exhaust stack and aluminized. 42 inches long, inlet inside diameter 3 inches, outlet outside diameter 3 inches. For tractor models 190, 190XT. (Part No: 70244555)
$40.56

Allis Chalmers 190XT Manifold
Manifold
- For diesel models: 190, 190XT, 200, 7000, 7010, 7020, 8010. Gaskets NOT included. (Part No: 74007652)
$118.23

Allis Chalmers 190XT Muffler
Muffler
- Muffler, vertical, gas and non-turbo diesel. Serial number 19001 and up. For 190, 190XT. (Part No: 70250632)
$70.89

Allis Chalmers 190XT Muffler
Muffler
- Vertical Exhaust Inlet. Inside diameter of the inlet is 3 inches, outside diameter of the outlet is also 3 inches. Overall length is 40 inches. For 190XT, Early 200, 210, 220 Diesel. OEM number, use R1756 clamp, use R1805 rain cap (Part No: R1571)
$52.59

Allis Chalmers 190XT Straight Pipe
Straight Pipe
- Vertical Exhaust Inlet inside diameter 3 inches, outlet outside diameter 3 inches, overall length 40 inches. For D21 Diesel, 190 Gas (use with R1569 muffler), 190XT Diesel. OEM number use R1756 clamp, use R1805 rain cap. (Part No: R1564)
$42.39

Fuel System / Air Intake
No
Picture
Carburetor, Rebuilt
- This rebuilt carburetor is a direct replacement for OEM numbers matching:13327. For the following tractor models: 190XT. Add $50.00 core charge to price (will be added after order is placed when ordering online) - you will receive instructions for returning your core for a refund if you have one available. (Part No: 1136-CARB)
$207.50

Allis Chalmers 190XT Fuel Cap
Fuel Cap
- For models D21, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces: 241174, 243025, 254013, 262788, 70254013, 70262788. Includes gasket, 3.475 inch outside diameter, 2.505 inch tang to tang. (Part No: 70262788)
$16.88

Allis Chalmers 190XT Fuel Filter
Fuel Filter
- Spin-on, outside diameter 3.81 inch, inside diameter 15/16 inch-16 thread, height 5.53 inch. For Models: 180, 185, 190, 190XT, 190XT III, 210, 220, 6060, 6070, 8550, D21. (Part No: 74028945)
$8.99

Allis Chalmers 190XT Fuel Sending Unit
Fuel Sending Unit
- For tractor models 190, 190XT, 190XT III, D21. Replaces 70239788. (Part No: 70276224)
$47.42

Allis Chalmers 190XT Precleaner Bowl
Precleaner Bowl
- Clear plastic pre-cleaner bowl, for air intake on diesel models D2900, 649T prior to serial number 12201. (A) Bowl outside diameter at top: 10-1/2 inches. (B) Cone inside diameter at top: 5-9/16 inches. (C) Bowl side height: 3 inches. (D) Overall height: 4 inches. Large bowl 10-1/2 inch diameter, for 3 to 4 inch. For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, D21, G, L, L2, M, M2. (Part No: 70651270)
$15.15

Allis Chalmers 190XT Sediment Bowl Assembly
Sediment Bowl Assembly
- Large bowl, single inlet type. Used on; (D15 Gas serial number 9001 and up and All Diesel using 2.315 Long Glass Bowl), (D17 Gas serial number 42001 and up and all Diesel using 2.315 Long Glass Bowl), (D19 Gas serial number 12001 and up and all Diesel using 2.315 Long Glass Bowl), (D21, WD45, 170, 175, 180, 185 all 2.315 Long Glass Bowl), (U Gas only using 2.315 Long Glass Bowl and single outlet ), (UC Gas only using 2.315 Long Glass Bowl and single outlet), (190, 190XT Gas, Diesel. Using 2.315 Long Glass Bowl). Fittings are 3/8 inch pipe inlet, 1/8 inch pipe outlet, 2.315 inch tall glass bowl. Replaces: 237946 and 70237946. (Part No: S.61581)
$18.23

Allis Chalmers 190XT Sediment Bowl Gasket and Screen
Sediment Bowl Gasket and Screen
- This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 208325, 208363, 70208325, 70208363 (Part No: 49923D)
$3.11

Allis Chalmers 190XT Throttle Lever Knob
Throttle Lever Knob
- For tractor models CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. (Part No: 220901)
$7.35

Allis Chalmers 190XT Throttle, Traction Booster, Hydraulic and PTO Levers Knob
Throttle, Traction Booster, Hydraulic and PTO Levers Knob
- Plastic Knob, 3/8 inch fine thread. For tractor models 190, 190XT, 200, 210, 220. Diameter of knob may vary. (Part No: R4572)
$5.39

Allis Chalmers 190XT Turbocharger
Turbocharger
- For tractor models 190XT, 200, 7010, 8010 all TO4B80 turbo models. (Part No: 74009171)
$506.28

Gauges
Allis Chalmers 190XT Amp Gauge
Amp Gauge
- This amp gauge has the "Allis-Chalmers" logo printed on the face. It fits the following tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, 160, 170, 175, 180, 190, 190XT, 200, 210, 220. It is meant to be used on systems that have been converted to 12 volts. It has a white face, chrome bezel, and it reads 60-0-60. (Part No: ACS1833)
$29.25

Allis Chalmers 190XT Dash Light with 12V Bulb
Dash Light with 12V Bulb
- Used on the following Allis Chamlers modles: D10, D12, D14, D15, D17, D19, D21, I40, I400, I60, I600, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, this Dash Light replaces OEM part numbers 229203, 230247, 234404, 70229203, 70230247, 70234404. This part has a 0.658 inch socket diameter, 1 inch center to center on mounting holes and a Chrome finish. (Part No: 70234404)
$38.96

Allis Chalmers 190XT Dash Warning Light
Dash Warning Light
- Know when you oil pressure is low with this Dash Warning Light. This is a 12 - volt light with red dome. It is 2.191 inches over all length, with 0.675 inch outside diameter threads. 2 Spade Terminals. Used on Allis Chalmers D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces part numbers 240837, 240838, 240869, 276390, 70240837, 70240838, 70240869, 70276390 (Part No: 240837)
$28.79

Allis Chalmers 190XT Oil Pressure Switch
Oil Pressure Switch
- Know if you lose oil pressure when it happens. This switch is used with 240837 Dash Warning Light. This switch is used on Allis Chalmers models: D21, 180, 185, 190, 190XT, 200, 210, 220, 4W305, 7000, 7030, 7040, 7050, 7060, 7080. Replaces Allis Chalmers part numbers 74020666, 74021445 (Part No: 74021445)
$27.49

Allis Chalmers 190XT Proofmeter Drive Assembly
Proofmeter Drive Assembly
- With Cover, 2 gears, 2 gaskets. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, D21 Has 12 and 45 teeth. Replaces original part numbers 246764, 70246764. (Part No: 720046764)
$39.41

Allis Chalmers 190XT Sending Unit Gasket
Sending Unit Gasket
- The dimensions of this rubberized cork gasket are:1.715 inch inner diameter, 2.850 inch outside diameter, 0.091 inch thick, and there are five (5) inch screw holes. Replaces 1015335M1, 101611A, 10A29269, 10A7362, 10A9818, 158046A, 189605M1, 189605M2, 189605M3, 239789, 241522, 29-12, 30-3048772, 369154R1, 70140C1, 70239789, 70241522, A11822, A61161, F2418R, R27181 (Part No: 189605M1)
$2.07

No
Picture
Tachometer
- Tach drive runs off the alternator. For tractor models (190 from serial number 20600 and up), 190XT, 200. Replaces 70255036. (Part No: 70252409)
$162.90

Allis Chalmers 190XT Tachometer Cable
Tachometer Cable
- 56 inch total length. For tractor models (D15 diesel), (D17 gas), (D21, 190, 190XT diesel with camshaft driven tachometer). Replaces 229751, 233639, 244107, 261607, 261609, 70229751, 70233639, 70244107, 70261607, 70261608. (Part No: AM3131T)
$37.49

Hitch / Drawbar
Allis Chalmers 190XT Drawbar
Drawbar
- 52.25 inches long, 2.50 inches wide, 1.250 inches high with holes at 1.720 inches, 4.331 inches, 5.692 inches, 8.332 inches from front. For tractor models 190, 190XT, 200, 7000, D19. Additional $30 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 70239813)
$228.60

Allis Chalmers 190XT Lift Link Clevis
Lift Link Clevis
- Part is 7 3/4 inch overall length, 3/4 inch pin holes, 1 inch space in stirrup, and 1 1/8 inch threaded female end. For tractor models D17, 170, 175, 180, 185, 190, 190XT. (Part No: 70257726)
$73.83

Allis Chalmers 190XT Lift Link Screw
Lift Link Screw
- Thread length 12.875 inch, thread diameter 1.2 inch. For tractor models 190, 190XT, 200. (Part No: 70254111)
$50.00

Hydraulic System
Allis Chalmers 190XT Hydraulic Filter
Hydraulic Filter
- Oil filter element, spin on type. For 180, 185, 190, 190XT, D15, D17, D19, D21 (Part No: 70239930)
$8.80

Allis Chalmers 190XT Hydraulic Pump
Hydraulic Pump
- (Single). Replaces 70255101. For tractor models 190, 190XT, 190XT III, 200. (Part No: 70257213)
$1379.99

Allis Chalmers 190XT Hydraulic Pump, Dual
Hydraulic Pump, Dual
- For tractor models (190XT diesel serial number up to 26612), 190 gas serial number up to 26855, diesel serial number up to 26857). (Part No: 70248736)
$2362.49

Allis Chalmers 190XT Hydraulic Pump, Dual
Hydraulic Pump, Dual
- For tractor models 200, 210, 220, (190XT, 190XT III diesel SN# 26612 and up), (190 gas SN# 26855 and up, diesel SN# 26857 and up). (Part No: 70257005)
$2087.00

No
Picture
Hydraulic Pump, Triple
- For tractor models 190 gas serial number less than 26855, diesel serial number less than 26857, 190XT diesel serial number less than 26612. (Part No: 70248735)
$2659.32

Lights
Allis Chalmers 190XT Bulb, Sealed Beam, Flood
Bulb, Sealed Beam, Flood
- 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces 239804, 1164605, 70239804, 71164605 (Part No: 28A116)
$12.03

Allis Chalmers 190XT Dash Light, Chrome, 12 Volt
Dash Light, Chrome, 12 Volt
- For tractor models 170, D10, D12, D14, D15, D17, D19, D21, 175, 180, 185, 190, 190XT, 200, 210, 220, I-40, I-400, I-60, I-600. Replaces 230247, 234404, 70230247, 70234404. (Part No: 229203)
$29.14

Allis Chalmers 190XT Headlight Washer
Headlight Washer
- Used with light part number 164089AS. For the following tractors: (170, 175, 180, 185, 190, 190XT all with flat top fenders), 200, 7000, 7030, 7040, 7050, 7060, 7080. (Part No: 504781M1)
$1.77

Allis Chalmers 190XT LED Lamp, 12 Volt
LED Lamp, 12 Volt
- This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Used on Allis Chalmers Combines: A, C, E, EIII, F, K, L, L2, M, M2. Tractors : D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 5040, 5050, 6040, 6060, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: L4411LED)
$51.51

Allis Chalmers 190XT Light Bulb, Sealed Beam, 12 Volt
Light Bulb, Sealed Beam, 12 Volt
- This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 230232, 70232232, 70276858. (Part No: 373662R91)
$8.48

Allis Chalmers 190XT Light Switch
Light Switch
- For tractor models (190, 190XT, 190XT III all serial number up to serial number 19000), D10, D12, D14, D15, D17. (Part No: 70234409)
$7.50

Allis Chalmers 190XT Light ring
Light ring
- The dimensions of this light ring with screw are 4.5 inches in height and 0.885 inches in width. For the following tractors D14 with serial number 19001 and up, D15, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7030, 7050. Replaces 10P1552, 230233, 371445R91, 371449R91, 371451R91, 70230233, AF3891R, B50255, B50258, JDS676. Verify measurements before ordering. Most models used more than one headlight style in production. (Part No: 371449R91)
$28.50

Allis Chalmers 190XT Safety Light Amber
Safety Light Amber
- 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Part No: S.61357)
$18.75

Allis Chalmers 190XT Sealed Beam Bulb
Sealed Beam Bulb
- Red backed, work/tail light, 4-1/2 inch diameter. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 6040, 7030, 7050, D10, D12, D15, D17, D19, D21. (Part No: 70250301)
$20.23

Allis Chalmers 190XT Tail Light \ Dash Light Bulb - 12-Volt
Tail Light / Dash Light Bulb - 12-Volt
- This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Part No: TLBULB12V)
$1.14

Allis Chalmers 190XT Work Tail Light Assembly
Work Tail Light Assembly
- 12 VOLT WOK LIGHT. For AC models: D10, D12, D14, D15, D17, D19, D21, 190, 190XT, 190XT III. (Part No: 70243313)
$76.07

Oil System
Allis Chalmers 190XT Oil Fill Breather Cap, With Clip
Oil Fill Breather Cap, With Clip
- 3-1/4 inches tall (says "OIL"). Fits B, C, CA, WD, WD45, D10, D12, D14, D15, 190XT, D17, D19, HD3, 200, 300, 310, 420, 430, 500B, W3, W5, VAC, VAI, VAH, VA, VAO, VAS. Replaces OEM numbers 203196, 205298, 200267. (Part No: R4458)
$41.25

No
Picture
Oil Filter
- For tractor models 180, 185, 190, 190XT, 210, 220. (Part No: 74027979)
$12.90

Allis Chalmers 190XT Oil Pan Drain Plug
Oil Pan Drain Plug
- White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Uses EBU6734A washer, sold separately. Replaces 205060, 224994, 225585, 225657, 226408, 4026437, 74026437. (Part No: C5NE6730B)
$3.00

Allis Chalmers 190XT Oil Pan Drain Plug Washer
Oil Pan Drain Plug Washer
- This washer is used with C5NE6730B Oil Drain Plug. (Part No: EBU6734A)
$1.25

PTO / Driveline
No
Picture
PTO Clutch Drive Plate
- 6 inch outside diameter, 3.625 inch inside diameter, 28 teeth. For tractor models (quantity used): 180 (6), 185 (6), 190 (8), 190XT (8), 190XT III (8), 200 (8), 4W220 (5), 4W305 (7), 7000 (3), 7010 (4), 7020 (4), 7030 (4), 7040 (4), 7045 (5), 7050 (4), 7060 (5), 7080 (5), 7580 (5), 8010 (4), 8030 (4). (Part No: 70256524)
$25.43

Allis Chalmers 190XT PTO and Lift Shaft Housing Seal
PTO and Lift Shaft Housing Seal
- PTO Outer Seal for 1 speed, 1 3/8 inch output shaft. This oil seal measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide For tractor models B, C, CA, D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 190XT III, 200. Replaces: 224810, 230608, 241779, 70224810, 70230608, 70241779 (Part No: 70241779)
$6.89

Paint
No
Picture
Paint, Cream, 1 Gallon
- This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP270GAL)
$48.37

No
Picture
Paint, Cream, 1 Quart
- This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP270QT)
$20.40

No
Picture
Paint, Cream, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP270SP)
$58.95

No
Picture
Paint, Persian Orange #2, 1 Gallon
- This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP285GAL)
$44.00

No
Picture
Paint, Persian Orange #2, 1 Quart
- This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP285QT)
$17.55

No
Picture
Paint, Persian Orange #2, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP285SP)
$49.60

Seats
Allis Chalmers 190XT Back Cushion, Wood Backing
Back Cushion, Wood Backing
- This High Quality Back Cushion is on a wood backing. It is not exactly like the original. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces: 236460, 70236460 (Part No: 70236460W)
$52.91

Allis Chalmers 190XT Back Rest Cushion on Steel
Back Rest Cushion on Steel
- This Back Rest Cushion is restoration quality with powder coated steel backing. Cushions are embossed like original. High quality stitching. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces: 236460, 70236460 (Part No: 70236460-OE)
$122.48

Allis Chalmers 190XT Seat Back
Seat Back
- Black & White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Part No: R4357)
$100.36

Allis Chalmers 190XT Seat Back
Seat Back
- Black & White Vinyl on Wood For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Part No: R0853)
$44.66

Allis Chalmers 190XT Seat Back
Seat Back
- Black Vinyl on Steel For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080. Replaces 70255581, 70255581-1 (Part No: 70255581)
$178.52

Allis Chalmers 190XT Seat Back
Seat Back
- Black & White Vinyl on Steel For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat (Part No: R4360)
$204.38

Allis Chalmers 190XT Seat Back
Seat Back
- White Vinyl on Wood For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat (Part No: R0858)
$57.41

Allis Chalmers 190XT Seat Back Cushion on Steel
Seat Back Cushion on Steel
- White Vinyl on Steel For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat. Replaces 70243517, 243517 (Part No: R0855)
$204.80

Allis Chalmers 190XT Seat Back Cushion on Wood
Seat Back Cushion on Wood
- Lower (wrap-around) arm rest cushion. On Wood. Used on Allis Chalmers 180, 190, 190XT, 200, 210, 220 using deluxe three cushion seat. Replaces 70243517, 243517 (Part No: 70243517)
$96.64

Allis Chalmers 190XT Seat Back Cushion on Wood
Seat Back Cushion on Wood
- This is the upper back cushion on a three cushion Seat. White Vinyl on Wood. Used on Used on Allis Chalmers 180, 190, 190XT, 200, 210, 220 using deluxe three cushion seat. Replaces 70243516, 243516, 70256765, 256765, 70256766, 256766 (Part No: 70256765)
$21.87

Allis Chalmers 190XT Seat Bottom
Seat Bottom
- Black & White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Part No: R4356)
$138.83

Allis Chalmers 190XT Seat Bottom
Seat Bottom
- Black & White Vinyl on Wood. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Part No: R0852)
$68.75

Allis Chalmers 190XT Seat Bottom
Seat Bottom
- Black Vinyl on Steel For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030. Replaces 70256350, 70256350-1 (Part No: 70256350)
$126.48

Allis Chalmers 190XT Seat Bottom
Seat Bottom
- Black & White Vinyl on Steel For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat (Part No: R4359)
$146.36

Allis Chalmers 190XT Seat Bottom
Seat Bottom
- White Vinyl on Steel For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat. Replaces 70243515 (Part No: R0854)
$141.73

Allis Chalmers 190XT Seat Bottom
Seat Bottom
- White Vinyl on Wood. For tractor models 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat. (Part No: R0857)
$66.34

Allis Chalmers 190XT Seat Bottom Cushion
Seat Bottom Cushion
- This Seat Bottom Cushion Restoration quality with powder coated steel backing. Cushions are embossed like original. High quality stitching. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces 236461, 70236461 (Part No: 70236461-OE)
$157.32

Allis Chalmers 190XT Seat Bottom Cushion, Wood Base
Seat Bottom Cushion, Wood Base
- This is a high quality replacement for Allis Chalmers D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). It has a wood base. Not exactly like the original. Replaces 236461, 70236461 (Part No: 70236461W)
$73.89

Allis Chalmers 190XT Seat Cushion Set
Seat Cushion Set
- This Black & white vinyl two piece cushion set is steel backed. Consists of R4356, R4357 plus the Seat Frame. Original style pleated covering. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. Replaces: 236318 (Part No: R4358)
$373.25

Allis Chalmers 190XT Seat Frame
Seat Frame
- Used with two cushions on Allis Chalmers models: 170, 175, 180, 185, 190, 190XT, 200, 220, 7030, 7050, D10, D12, D14, D15, D17, D19 (Part No: 70243740PAN)
$172.91

Allis Chalmers 190XT Seat Shock Bushing Pair
Seat Shock Bushing Pair
- This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Part No: 72696R1)
$2.25

Allis Chalmers 190XT Seat Upper Back
Seat Upper Back
- Black & White Vinyl on Steel For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat. (Part No: R4361)
$77.36

Allis Chalmers 190XT Seat Upper Back
Seat Upper Back
- White Vinyl on Steel For 180, 185, 190, 190XT, 200, 210, 220 with Three-Piece Seat (Part No: R0856)
$61.89

Allis Chalmers 190XT Seat, Upper Back
Seat, Upper Back
- White vinyl on wood. For tractor models 180, 185, 190, 190XT, 200, 210, 220. (Part No: R0859)
$27.56

Allis Chalmers 190XT Small Backrest
Small Backrest
- Small backrest custion complete. For 180, 190, 190XT using deluxe seat. For 180, 190, 190XT Replaces 243516, 70243516, A-70243516-4 (Part No: 243516)
$21.87

Sheet Metal / Body Parts
Allis Chalmers 190XT Toolbox
Toolbox
- Measures 21-3/8 Inches long, 6-3/16 Inches high, 4 Inches wide. For tractor models D15, D17, D19, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces: 236661, 242323, 249750, 70249750 (Part No: 70249750)
$53.13

Steering
Allis Chalmers 190XT Pivot Pin Assembly
Pivot Pin Assembly
- Includes: 70916896 (7/8 inch NF slotted nut) and 70925721 (5/32 inch X 2 inch cotter pin). For tractor models (170, 175 gas with roll shift front axle), (180, 185, 190, 190XT, 200, D19 all with roll shift front axle), (D17 serial number 38136 and up with roll shift front axle). (Part No: 70235154)
$45.31

Allis Chalmers 190XT Seal
Seal
- Seal with wear sleeve for tractors with dual front wheels, except HD axle, serial number 42001 and up. For tractor models 160, 170, 175, 180, 190, 190XT, 200, 6060, 6070, 6080, 7000, D10, D12, D15, D17. (Part No: 70235120)
$13.59

Allis Chalmers 190XT Spindle Bushing
Spindle Bushing
- Used on spindle 70237434, on tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Part No: 70211743)
$13.44

Allis Chalmers 190XT Spindle Support Knee, LH
Spindle Support Knee, LH
- With the spindle with 12 inch vertical shafton the following models: (180, 185 Hi clearance), (190, 190XT, 190XT III, 200 all std.). (Part No: 70257604)
$329.85

No
Picture
Spindle Support Knee, RH
- For tractor models (180, 185 Hi clearance), (190, 190XT, 190XT III, 200 all std.). (Part No: 70257605)
$317.40

Allis Chalmers 190XT Spindle Thrust Washer
Spindle Thrust Washer
- For tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Part No: 70218762)
$5.67

Allis Chalmers 190XT Steering Arm, LH
Steering Arm, LH
- Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Part No: 70245867)
$136.74

Allis Chalmers 190XT Steering Arm, RH
Steering Arm, RH
- Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Part No: 70245868)
$136.74

No
Picture
Steering Motor, Hydraulic
- For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, D21. (Part No: 70271316)
$488.30

No
Picture
Steering Wheel
- 15-3/4 inches in diameter, 36 spline, 7 inches deep. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7030, 7040, 7050, 7060, 7080, 7580. Replaces 256852, 1142487. (Part No: 242933)
$131.83

No
Picture
Steering Wheel
- 16 inch diameter, 7 inch dish. Splined hub for tractor models: 170, 173, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050. Uses cap part number 70246722. (Part No: 70256852)
$40.56

No
Picture
Steering Wheel Cap
- Use with 242933 steering wheel. For tractor models 170, 180, 185, (190 from serial number 2485), 190XT, 200, 210, 220, 440, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7045, 7060, 7080, 7580. (Part No: 71362581)
$30.71

No
Picture
Steering Wheel Cap
- Clear cap with the AC Allis Chamers logo. Fits steering wheel part number 70256852. For tractor models 170, 173, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050. (Part No: 70246722)
$17.94

Allis Chalmers 190XT Steering Wheel Nut
Steering Wheel Nut
- This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Part No: 35P51)
$6.15

Allis Chalmers 190XT Tie Rod Assembly
Tie Rod Assembly
- Consists of OEM part numbers 70250140 and 70250141. Replaces: 249418, 225280, 225279, 254662, 254661. For (D14, D15, D17, D19, WD, WD45 Fits these models if cut to length), (170, 175, 180, 185, 190XT, 200 fits these models with standard front end). (Part No: 70254660)
$49.60

Allis Chalmers 190XT Tie Rod End, Female
Tie Rod End, Female
- 17.500 inches long. For tractor models 180, 185, 190, 190XT, 200. Will also fit 170, D14, D15, D17, D19 if cut to proper length. Can also replace 250142 used on WD, WD45 if cut to length. (Part No: 70254661)
$31.05

Allis Chalmers 190XT Tie Rod Male
Tie Rod Male
- Tie rod end with tube, outer. For adjustable front axles. 16-1/2 inches to center of post. 0.812 inch diameter. 50 inch minimum thread, not for Hi-Clear. For 180, 185, 190, 190XT, 200, D17, D19. (Part No: 70254662)
$30.11

Wheels
Allis Chalmers 190XT Bar Clamp
Bar Clamp
- Wheel clamp, disc to rim. For power shift rear wheels. Serial number 42001 and up. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 5045, 5050, 6060, 6070, 6080, 6140, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550, D15, D17. Replaces 70235676 (Part No: 898021M1)
$18.18

No
Picture
Bearing Cone
- Rear axle inner cone, Timken number 3982. For tractor models 190, 190XT, D17. (Part No: 70209905)
$28.37

Allis Chalmers 190XT Front Rim
Front Rim
- This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces: 235727, 237405, 70235727, 70237405 (Part No: FW60166)
$87.64

Allis Chalmers 190XT Front Rim, 6 x 15
Front Rim, 6 x 15
- Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FW60156)
$52.37

Allis Chalmers 190XT Front Rim-Heavy Duty
Front Rim-Heavy Duty
- Front Rim with weight holes. 4.5 inch x 16 inch, 2500 lb. capacity. 6 bolt, 6 inch circle, 4.62 inch pilot for 5.50 inch x 6.00 inch x 16 inch tires. Also replaces OEM # 70235086, 70248460. Fits Models: (D15 with serial number below 9001), (D17 with serial number below 75001), D19, ED40, 160, 170, 175, 180, 185, 190, 190XT, 6060, 6070. Additional $15 shipping due to weight. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: 8N1015D)
$63.05

Allis Chalmers 190XT Front Wheel Bearing Kit
Front Wheel Bearing Kit
- This is a complete Front Wheel Bearing Kit for 1 wheel, with a 6 bolt hub. Verify individual part numbers to ensure you are ordering the correct kit. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 500, 600, 6060, 6070, 6080, 615, 7000, (D15 serial number 9001 and up with 6 bolt hub), (D17 serial number 42001 with 6 bolt hub), D19, I60, I600. Kit contains one of the following 15250B, 15118, 26823, 26882, 70235120. (Part No: WBKAC2)
$48.88

Allis Chalmers 190XT Front Wheel Lug Bolt
Front Wheel Lug Bolt
- Used in many applications, this wheel stud has 1/2 inch - 20 NF thread, 1 inch thread length and 13/16 inch hex head. Used on Allis Chalmers 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, B, C, CA, D10, D12, D14, D15, D17, D19, G as rear rim lug bolt, WC, WD, WD45, WF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863. (Part No: 512581M1)
$10.43

Allis Chalmers 190XT Stop Body Screw, Single
Stop Body Screw, Single
- This stop body screw for the rear wheel rim is used with power adjust rims 535453M91, 535452M91, PAR10X28, C5NN1050J and C5NN1050H. Replaces: 218662, 225190, 70218662, 70225190, 70273627. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Part No: C0NN1058A)
$3.66

Allis Chalmers 190XT Wheel Hub
Wheel Hub
- For use with threaded hub cap, 4.620 inch diameter pilot hole, 6.00 inch wheel bolt circle, replaces OEM number 236706. For tractor models 170, 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060 with 96 inch tread), 6070, 6080, 615, (7000 early), D15, D17, D19, 160, 1600. (Part No: 70261418)
$74.52



Accessories / Supplies
Allis Chalmers 190XT Auxiliary Heater, Universal
Auxiliary Heater, Universal
- This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Allis Chalmers 190XT Brake Rivet Tool
Brake Rivet Tool
- Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Part No: RIVET_TOOL)
$40.58

Cooling System
Allis Chalmers 190XT Magnetic Block Heater
Magnetic Block Heater
- Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)
$70.77

Decals and Emblems
Allis Chalmers 190XT AC Diamond Decal
AC Diamond Decal
- Black and White, Milwaukee, 6 inches x 6 inches. Vinyl Cut. (Part No: R4634)
$16.28

Allis Chalmers 190XT AC Diamond Decal
AC Diamond Decal
- Orange Background, 5 1/2 inches x 5 1/2 inches. (Part No: R4633)
$10.10

Allis Chalmers 190XT AC Diamond Decal
AC Diamond Decal
- Black and White, 4 inches x 4 inches, Vinyl Cut. (Part No: R4632)
$13.02

Allis Chalmers 190XT AC Diamond Decal
AC Diamond Decal
- 1 inches x 1 inches orange, blue and gold printed on vinyl. (Part No: R5234)
$3.26

Allis Chalmers 190XT AC Logo Decal
AC Logo Decal
- 1-1/2 inches x 8 inches, Black and Orange on White. (Part No: R0675)
$5.56

Allis Chalmers 190XT AC Logo Decal
AC Logo Decal
- 3 inches x 18 inches, Black and Orange on White. (Part No: R0676)
$15.46

Allis Chalmers 190XT AC Logo Decal
AC Logo Decal
- 24 inches long, Black and Orange. (Part No: R0677)
$30.72

Allis Chalmers 190XT AC Logo Decal, New Style
AC Logo Decal, New Style
- 3-1/2 inches x 3-1/2 inches Black and Orange on White. (Part No: R5168)
$5.65

Allis Chalmers 190XT AC Logo Decal, New Style
AC Logo Decal, New Style
- 4-1/2 inches x 4-1/2 inches Black and Orange on White. (Part No: R5169)
$5.82

Allis Chalmers 190XT AC Logo Decal, New Style
AC Logo Decal, New Style
- 8 inches x 8 inches Black and Orange on White, printed on vinyl. (Part No: R5233)
$30.93

No
Picture
Power Shift Decals
- One pair, white. For the cab on some Allis models. (Part No: R0674)
$25.14

Electrical System

NOTE
Alternator
- Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 & newer). Just call us at 800-853-2651.
NOTE

Allis Chalmers 190XT Alternator Base Bracket Kit - Universal
Alternator Base Bracket Kit - Universal
- Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)
$33.75

Allis Chalmers 190XT Alternator Conversion Plug
Alternator Conversion Plug
- Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Part No: ADR9209)
$13.67

Allis Chalmers 190XT Alternator Conversion Plug
Alternator Conversion Plug
- Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$13.67

Allis Chalmers 190XT Alternator Top Adjusting Bracket, Universal
Alternator Top Adjusting Bracket, Universal
- Universal Top Adjusting Bracket For Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$12.29

No
Picture
Battery Thermal Wrap
- This thermal battery wrap is used to keep your battery warm. It is 60 Watts and measures 28 inches long. (Part No: BTW28)
$22.50

No
Picture
Battery Thermal Wrap
- 80 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW36)
$37.48

No
Picture
Battery Thermal Wrap
- 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

No
Picture
Coil
- This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$31.47

Allis Chalmers 190XT Coil - Universal 12V
Coil - Universal 12V
- Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt system without the resistor. Replaces: 74061737, 74514967. (Part No: D5TE12029AB)
$9.65

Allis Chalmers 190XT Magneto, Wico XH & XHD, Service & Parts Manual
Magneto, Wico XH & XHD, Service & Parts Manual
- Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25


NOTE
STARTER
- Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$3.12

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$3.12

Allis Chalmers 190XT Spark Plug Wire Set, Universal, 4 Cyl.
Spark Plug Wire Set, Universal, 4 Cyl.
- Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Part No: CPN12259)
$12.02

Allis Chalmers 190XT Starter Armature
Starter Armature
- Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Verify OEM part before ordering. (Part No: 1871662)
$67.02

Allis Chalmers 190XT Starter, Generator, Distributor Tag, 6 Volt, Blank
Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.55

Allis Chalmers 190XT Tag for Starter\Generator, 12 Volt, Blank
Tag for Starter/Generator, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.45

Allis Chalmers 190XT Terminal Kit
Terminal Kit
- Deluxe solderless terminal and connector assortment. 175 pieces. Includes female slip ons, oval butt connectors, ring connectors, male slip ons, spade terminals, and wire splice. (Part No: B1SB22)
$34.19

Engine Gaskets
Allis Chalmers 190XT Silicone Blue RTV
Silicone Blue RTV
- Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: PRM77BR)
$8.45

Allis Chalmers 190XT Silicone Copper RTV
Silicone Copper RTV
- Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicone. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$11.10

Engine Parts

NOTE
Valve Overhaul Kits
- Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE

Engine Pistons and Sleeves
Allis Chalmers 190XT Cylinder Hone
Cylinder Hone
- For bores from 1 1/2 to 3 inches. Easily adjusts. Length of 7 3/4 inches. Comes with stones. Call for replacement stones. (Part No: B1SB1704)
$25.88

Engine Rings

NOTE
Piston Ring Sets
- Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE

Exhaust System
Allis Chalmers 190XT Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89020C)
$78.88

Allis Chalmers 190XT Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89025C)
$92.67

Allis Chalmers 190XT Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89027C)
$99.58

Allis Chalmers 190XT Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89051C)
$117.23

Allis Chalmers 190XT Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 146520CHR)
$112.10

Allis Chalmers 190XT Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89054C)
$115.52

Allis Chalmers 190XT Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.75 inch inside diameter inlet. It is 4 inches outside diameter beyond the inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89375C)
$152.21

Allis Chalmers 190XT Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 146490CHR)
$131.51

Allis Chalmers 190XT Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89057C)
$129.84

Allis Chalmers 190XT Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89485C)
$159.35

Allis Chalmers 190XT Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: L102236CHR)
$85.96

Allis Chalmers 190XT Muffler Clamp, 1-1\2
Muffler Clamp, 1-1/2
- New Clamp for 1-1/2 inch outside diameter muffler inlet. (Part No: MC112)
$2.22

Allis Chalmers 190XT Muffler Clamp, 1-1\4
Muffler Clamp, 1-1/4
- New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: MC114)
$3.98

Allis Chalmers 190XT Muffler Clamp, 1-1\8
Muffler Clamp, 1-1/8
- New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$4.17

Allis Chalmers 190XT Muffler Clamp, 1-3\4
Muffler Clamp, 1-3/4
- New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: MC134)
$2.99

Allis Chalmers 190XT Muffler Clamp, 1-3\8
Muffler Clamp, 1-3/8
- New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: MC138)
$2.50

Allis Chalmers 190XT Muffler Clamp, 2-1\4
Muffler Clamp, 2-1/4
- New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: MC214)
$3.18

Allis Chalmers 190XT Muffler Clamp, 2-3\4
Muffler Clamp, 2-3/4
- New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: MC234)
$4.50

Allis Chalmers 190XT Muffler Clamp, 3
Muffler Clamp, 3
- New Clamp for 3 inch outside diameter muffler inlet. (Part No: MC300)
$4.50

Allis Chalmers 190XT Muffler Clamp, 3-1\2
Muffler Clamp, 3-1/2
- New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: MC312)
$4.75

Allis Chalmers 190XT Muffler Clamp, 3-1\4
Muffler Clamp, 3-1/4
- New Clamp for 3-1/4 inch outside diameter muffler inlet. (Part No: MC314)
$6.50

Allis Chalmers 190XT Muffler Clamp, 4
Muffler Clamp, 4
- New Clamp for 4 inch outside diameter muffler inlet. (Part No: MC400)
$7.50

Allis Chalmers 190XT Muffler Clamp, 4-1\2
Muffler Clamp, 4-1/2
- New Clamp for 4-1/2 inch outside diameter muffler inlet. (Part No: MC412)
$7.98

Allis Chalmers 190XT Muffler Clamp, 5
Muffler Clamp, 5
- New Clamp for 5 inch outside diameter muffler inlet. (Part No: MC500)
$7.98

Allis Chalmers 190XT Rain Cap
Rain Cap
- This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$6.51

Allis Chalmers 190XT Rain Cap
Rain Cap
- This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$7.25

Allis Chalmers 190XT Rain Cap
Rain Cap
- This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$7.10

Allis Chalmers 190XT Rain Cap
Rain Cap
- This rain cap is for a 2.75 inch pipe. (Part No: R1804)
$10.02

Allis Chalmers 190XT Rain Cap
Rain Cap
- This rain cap is for a 3.5 inch pipe. (Part No: R1806)
$10.34

Allis Chalmers 190XT Rain Cap
Rain Cap
- This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$9.80

Allis Chalmers 190XT Stainless Steel Clamp, 2.5 Inch
Stainless Steel Clamp, 2.5 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90871A)
$5.54

Allis Chalmers 190XT Stainless Steel Clamp, 2.75 Inch
Stainless Steel Clamp, 2.75 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90872A)
$5.94

Allis Chalmers 190XT Stainless Steel Clamp, 3.5 Inch
Stainless Steel Clamp, 3.5 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90874A)
$5.81

Allis Chalmers 190XT Stainless Steel Clamp, 4 Inch
Stainless Steel Clamp, 4 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90875A)
$6.42

Fuel System / Air Intake
Allis Chalmers 190XT Carburetor Elbow & Strainer
Carburetor Elbow & Strainer
- Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$5.13

Allis Chalmers 190XT Choke Cable
Choke Cable
- Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Allis Chalmers 190XT Fuel Filter, In-Line, 5\16 inch, Clear
Fuel Filter, In-Line, 5/16 inch, Clear
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.45

Allis Chalmers 190XT Fuel Tank Liner
Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$37.65

Allis Chalmers 190XT Fuel Tank Screen
Fuel Tank Screen
- This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Part No: R7949)
$9.90

Allis Chalmers 190XT Marvel-Schebler Service Manual
Marvel-Schebler Service Manual
- This Service manual is a complete manual for all DLTX and TSX model carburetors. Comes with tractor carburetor principle of operation and overhaul step-by-step instructions. 21 Pages. (Part No: MAR_CARB_SV)
$9.95

Allis Chalmers 190XT Sediment Bowl Gasket, 2-1\8 inch
Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.95

Gaskets
Allis Chalmers 190XT Gasket Material, Cork Rubber
Gasket Material, Cork Rubber
- 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR116)
$8.93

Gauges
Allis Chalmers 190XT Ammeter Gauge
Ammeter Gauge
- 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$3.08

Allis Chalmers 190XT Hourmeter
Hourmeter
- DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

Allis Chalmers 190XT Hourmeter, Analog
Hourmeter, Analog
- 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Allis Chalmers 190XT Oil Gauge Copper Line Kit
Oil Gauge Copper Line Kit
- Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch -24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

Allis Chalmers 190XT Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.96

Allis Chalmers 190XT Oil Pressure Gauge
Oil Pressure Gauge
- Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.88

Allis Chalmers 190XT Temperature Gauge, Universal
Temperature Gauge, Universal
- For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.68

Allis Chalmers 190XT Temperature Gauge, Universal
Temperature Gauge, Universal
- Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.02

Hitch / Drawbar
Allis Chalmers 190XT HAIR PIN ASSORTMENT
HAIR PIN ASSORTMENT
- 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16) inch, four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$7.04

Allis Chalmers 190XT Hair Pin Cotter Assortment
Hair Pin Cotter Assortment
- Hair Clips sizes from 1/16 x 1 3/8 to 3/16 x 3 1/4. Total of 141 pieces in 6 sizes. (Part No: B1SB16)
$30.35

Allis Chalmers 190XT Hitch Ball 10000LB 2-5\16
Hitch Ball 10000LB 2-5/16
- 2-5/16 ball size, 1-1/4 stud thread, 2-1/2 stud length, 10, 000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516114)
$23.85

Allis Chalmers 190XT Hitch Ball 15000LB 2-5\16
Hitch Ball 15000LB 2-5/16
- 2-5/16 inch ball size, 1-3/8 inch stud thread, 2-5/8 inch stud length, 15, 000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516138_)
$25.04

Allis Chalmers 190XT Hitch Ball 2000LB
Hitch Ball 2000LB
- 1-7/8 ball size, 3/4 stud thread, 1-3/4 stud length, 2000 LB MAX LOAD CAPACIRY, ONE CHROME hitch ball class. (Part No: CHB17834)
$13.37

Allis Chalmers 190XT Hitch Ball 3500LB
Hitch Ball 3500LB
- Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.74

Allis Chalmers 190XT Hitch Ball 5000LB
Hitch Ball 5000LB
- Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

Allis Chalmers 190XT Hitch Ball 5000LB 2-5\16
Hitch Ball 5000LB 2-5/16
- Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

Allis Chalmers 190XT Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$2.55

Allis Chalmers 190XT Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Package of 10 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 10. (Part No: DKLP91)
$3.15

Allis Chalmers 190XT Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long.***Enter 1 for package of 10*** (Part No: DKP316)
$1.95

Allis Chalmers 190XT Quick Hitch, Category I
Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$247.02

Allis Chalmers 190XT Universal Drawbar Lock
Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$21.81

Allis Chalmers 190XT Universal Stabilizer Chain Kit
Universal Stabilizer Chain Kit
- Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$63.65

Hydraulic System
Allis Chalmers 190XT Hydraulic Hose Assembly-NPT, 180 inch
Hydraulic Hose Assembly-NPT, 180 inch
- Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Part No: H42-2M-180)
$51.75

Allis Chalmers 190XT Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 200 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Part No: GG200)
$10.62

Implements
Allis Chalmers 190XT Axle Bolt
Axle Bolt
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Allis Chalmers 190XT Axle Nuts (5)
Axle Nuts (5)
- 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

Allis Chalmers 190XT Bearing Cup
Bearing Cup
- This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94

Allis Chalmers 190XT Bearing cone (L44643)
Bearing cone (L44643)
- For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$6.30

Allis Chalmers 190XT Caster Assembly
Caster Assembly
- Tail wheel and hub assembly with grease fitting and fork assembly. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

Allis Chalmers 190XT Caster Assembly, Old Style
Caster Assembly, Old Style
- Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

Allis Chalmers 190XT Caster Fork Assembly
Caster Fork Assembly
- New Style Fork style assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). Vertical shaft is 1.5 inches O.D., 8 inches in length. Fork spread is 6 inches. (Part No: 12528)
$92.76

No
Picture
Graphite Lubricant
- Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)
$19.95

Allis Chalmers 190XT HUB with BRG CUPS
HUB with BRG CUPS
- 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$24.90

Allis Chalmers 190XT Hub Assembly
Hub Assembly
- Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

No
Picture
Round Bale Tine 31.5 Inches
- Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

No
Picture
Round Bale Tine 38.5 Inches
- Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)
$77.06

No
Picture
Round Bale Tine 43 Inches
- Fully Hardened. (Part No: 241166)
$97.46

No
Picture
Round Bale Tine 43 Inches
- Fully Hardened. (Part No: 241166)
$97.46

No
Picture
Round Bale Tine 49 Inches
- Fully Hardened. (Part No: 241162)
$100.37

No
Picture
Round Bale Tine 49 Inches
- Fully Hardened. (Part No: 241162)
$100.37

No
Picture
Round Bale Tine 49 Inches
- Fully Hardened. (Part No: 241162)
$100.37

No
Picture
Round Bale Tine 55 Inches
- Fully Hardened. (Part No: 241163)
$109.42

Allis Chalmers 190XT Seal, Caster
Seal, Caster
- Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.56

Allis Chalmers 190XT Tail Wheel Assembly
Tail Wheel Assembly
- 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

No
Picture
Talc Powder Lubricant
- Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)
$21.75

Lights
Allis Chalmers 190XT Halogen Work Light-Double Bulb
Halogen Work Light-Double Bulb
- 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$51.42

Allis Chalmers 190XT Light Switch with Knob
Light Switch with Knob
- Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$27.74

Allis Chalmers 190XT Magnetic worklight Universal Mounting.
Magnetic worklight Universal Mounting.
- Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Allis Chalmers 190XT Portable Halogen Work Lamp
Portable Halogen Work Lamp
- 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

Allis Chalmers 190XT Work Lamp, HID, Flood Light
Work Lamp, HID, Flood Light
- Universal high intensity discharge flood light, 35 watt Xenon H3 lamp, size 4.725 inch width X 4.330 inch height X 5.512 inch length, internal ballast, hardened glass lens, far longer life span than halogen. 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$127.64

Allis Chalmers 190XT Work Light 12V
Work Light 12V
- Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Miscellaneous
Allis Chalmers 190XT Canopy
Canopy
- 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$430.31

No
Picture
Canopy Mounting Kit, 4 Post
- Mounts the canopy to any 4 post ROP frame. (Part No: B6604)
$65.44

No
Picture
Canopy Mounting Kit, Hoop Type
- Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)
$110.28

Allis Chalmers 190XT Canopy, Small Tractors
Canopy, Small Tractors
- 45 inches wide x 60 inches long. Molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through molding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$374.50

Allis Chalmers 190XT Deluxe Canopy, 3 Bow
Deluxe Canopy, 3 Bow
- Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100R)
$235.53

Allis Chalmers 190XT Deluxe Canopy, 3 Bow
Deluxe Canopy, 3 Bow
- This UNIVERSAL Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100B)
$192.01

Allis Chalmers 190XT HAND CLEANER GALLON
HAND CLEANER GALLON
- Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$28.72

PTO / Driveline
Allis Chalmers 190XT Driveline Assembly
Driveline Assembly
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$201.19

Allis Chalmers 190XT Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Part No: AB4111WY)
$187.82

Allis Chalmers 190XT Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111K33)
$288.01

Allis Chalmers 190XT PTO Safety Clutch, 40 HP
PTO Safety Clutch, 40 HP
- 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$235.29

Paint
Allis Chalmers 190XT 44 Minute DVD - How to Paint a Tractor
44 Minute DVD - How to Paint a Tractor
- This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$25.68

No
Picture
Acrylic Hardener, 16oz
- This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12P)
$42.20

No
Picture
Acrylic Hardener, 8oz
- This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12HP)
$19.46

No
Picture
Aluminum High Heat Paint
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP402HHSP_)
$34.83

No
Picture
Black Hi-Heat Spray Paint
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP411HHSP_)
$49.02

No
Picture
Paint, Allis Orange, 1 Quart
- This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP280QT)
$17.55

No
Picture
Paint, Allis Orange, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP280SP)
$44.19

No
Picture
Paint, Aluminum, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312GAL)
$44.00

No
Picture
Paint, Aluminum, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312QT)
$17.55

No
Picture
Paint, Aluminum, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312SP)
$44.19

No
Picture
Paint, Clear Coat, 1 Gallon
- From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL)
$58.92

No
Picture
Paint, Clear Coat, 1 Quart
- From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447QT)
$21.99

No
Picture
Paint, Clear Coat, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447SP)
$44.19

No
Picture
Paint, Gray Primer, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700GAL)
$44.00

No
Picture
Paint, Gray Primer, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700QT)
$17.55

No
Picture
Paint, Gray Primer, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700SP)
$44.19

No
Picture
Paint, Red Primer, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987GAL)
$44.00

No
Picture
Paint, Red Primer, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987SP)
$44.19

No
Picture
Paint, Satin Black, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225GAL)
$44.00

No
Picture
Paint, Satin Black, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225QT)
$17.55

No
Picture
Paint, Satin Black, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225SP)
$44.19

No
Picture
Paint, Yellow Primer, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2720GAL)
$44.00

No
Picture
Slip Resistant Coating
- Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)
$68.39

No
Picture
Slip Resistant Coating
- Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)
$29.64

No
Picture
Slip Resistant Coating Kit
- Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. (Part No: BL116KIT)
$99.22

Allis Chalmers 190XT Tire Paint, Black
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

Seats
Allis Chalmers 190XT Seat, Air Suspension, Black Leatherette, Universal
Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt –up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1518.86

Allis Chalmers 190XT Seat, Air Suspension, Cloth, Universal
Seat, Air Suspension, Cloth, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056)
$1437.23

Allis Chalmers 190XT Seat, Air Suspension, Universal
Seat, Air Suspension, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1518.86

No
Picture
Seat, Industrial
- Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18 inches wide, 19 inches high, 21 inches deep. (Mounting holes 9 inches wide x 9-3/4 inches deep). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)
$102.91

Allis Chalmers 190XT Seat, Universal
Seat, Universal
- **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1040ATSP)
$82.25

Allis Chalmers 190XT Seat, Universal
Seat, Universal
- BLUE Universal application leatherette suspension seat. For most compact, agricultural and industrial tractors. Adjustable base for 5 different mounting angles, internal suspension weight adjustment, special slotted base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, adjustable slide track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Add $30 additional shipping per seat due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Color is BLUE. (Part No: TS1060ATSP)
$80.04

Allis Chalmers 190XT Seat, Universal
Seat, Universal
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$82.25

Allis Chalmers 190XT Seat, Universal
Seat, Universal
- Seat assembly, black leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before purchasing. Weight 33 pounds. (Part No: TS1110BK)
$146.35

No
Picture
Seat, Universal
- Seat assembly, blue leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BL)
$113.74

No
Picture
Seat, Universal
- Seat assembly, yellow leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110YL)
$110.68

Allis Chalmers 190XT Tie-On Seat Cover
Tie-On Seat Cover
- Orange and White, 21 inches wide. Deluxe with 2 inches of foam. (Part No: R1012)
$36.00

Allis Chalmers 190XT Universal Seat
Universal Seat
- Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15 inches wide, 17 inches long, 19 inches high to the back of the seat. (Part No: TS1015)
$182.49

Allis Chalmers 190XT Universal Seat
Universal Seat
- Universal Vinyl seat has Multiple mounting holes, ranging from 4 inch to 11 inch center to center (front to back) and 6-1/2 to 13 inch center to center (side to side). Customer needs to verify it will work for their tractor. Seat cushion width is 18 inches. An adapter plate may need to be made for some models. Slide track for forward/rear adjustment. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. (Part No: TS1100)
$113.34

Sheet Metal / Body Parts
Allis Chalmers 190XT 2 Hour DVD - The How To of Sheetmetal Repair
2 Hour DVD - The How To of Sheetmetal Repair
- This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$25.68

Allis Chalmers 190XT Cab Foam Kit Spray Adhesive
Cab Foam Kit Spray Adhesive
- 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140)
$31.59

Allis Chalmers 190XT Pilot Punch Set
Pilot Punch Set
- Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Part No: RPD112K)
$146.93

Allis Chalmers 190XT SAFETY STEP KIT
SAFETY STEP KIT
- Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011)
$53.12

Allis Chalmers 190XT Toolbox, RED
Toolbox, RED
- This RED universal toolbox fits various tractor models. It measures 11 inches long, 4 inches wide, and 4 1/2 inches tall. The mounting holes must be drilled to match your tractor. (Part No: ABC308)
$41.99

Steering
Allis Chalmers 190XT Eaton Power Steering Pump Replacement
Eaton Power Steering Pump Replacement
- This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Part No: S03-1003)
$384.33

Allis Chalmers 190XT Filter, Power Steering
Filter, Power Steering
- Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Part No: AE33538A)
$11.19

Allis Chalmers 190XT Power Steering Pump Pulley
Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Part No: ABC1417)
$44.46

Tools
No
Picture
Blade Fuse Assortment
- With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)
$15.23

Allis Chalmers 190XT Chain Binder
Chain Binder
- 1/4 inch chain binder, 2600 pound load limit. (Part No: LL104)
$36.73

Allis Chalmers 190XT Chain Binder
Chain Binder
- 3/8 inch chain binder, 5400 pound load limit. Use with either 5/16 inch or 3/8 inch chain. (Part No: LL105)
$42.63

Allis Chalmers 190XT Chain Binder
Chain Binder
- 1/2 inch chain binder, 9200 pound load limit. Use with either 3/8 inch or 1/2 inch chain. (Part No: LL106)
$79.85

Allis Chalmers 190XT Digital Calipers, Stainless
Digital Calipers, Stainless
- High quality hardened stainless steel digital caliper. Calculates measurements up to 6 inhces with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$33.05

Allis Chalmers 190XT Grease Gun
Grease Gun
- Grease Gun. Pistol handle grease gun uses standard 11 inch grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)
$29.17

Allis Chalmers 190XT Grease Gun
Grease Gun
- Spring fed 11 inch barrel grease gun. Uses standard 11 inch grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080)
$20.66

Allis Chalmers 190XT Grease Gun
Grease Gun
- HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142)
$36.00

Allis Chalmers 190XT Grease Gun CLAMP
Grease Gun CLAMP
- Clamp holds all 2-1/4 inch diameter barrel hand guns. Bolts or screws anywhere through hole in bracket base. (Part No: GC102)
$11.21

Allis Chalmers 190XT Grease Gun PowerLuber 14.4V BATTERY
Grease Gun PowerLuber 14.4V BATTERY
- Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$134.19

Allis Chalmers 190XT Grease Gun PowerLuber 14.4V with CASE 1 BAT
Grease Gun PowerLuber 14.4V with CASE 1 BAT
- Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)
$288.95

Allis Chalmers 190XT Grease Gun PowerLuber 14.4V with CASE 2 BAT
Grease Gun PowerLuber 14.4V with CASE 2 BAT
- Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)
$403.25

Allis Chalmers 190XT Grease Hose 12 Inch
Grease Hose 12 Inch
- 12 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G115)
$11.62

Allis Chalmers 190XT Grease Hose 18 Inch
Grease Hose 18 Inch
- 18 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G118)
$10.59

No
Picture
Hay Moisture Tester
- Self Calibrating Electronic Moisture Tester. (Part No: S.58474)
$267.39

Allis Chalmers 190XT O-Ring Assortment
O-Ring Assortment
- Neoprene o-rings from sizes 1/8 x 1/4 to 3/4 x 1 inch. Total of 225 pieces in 11 sizes. (Part No: B1SB12)
$24.30

Allis Chalmers 190XT Winch Remote, Wireless
Winch Remote, Wireless
- Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003)
$22.48

Allis Chalmers 190XT Winch Set, 2500 Lb
Winch Set, 2500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002)
$110.33

Allis Chalmers 190XT Winch Set, 2500 Lb
Winch Set, 2500 Lb
- Universal 12 volt with Hand held remote. (Part No: 3013-0004)
$110.33

Allis Chalmers 190XT Winch Set, 3500 Lb
Winch Set, 3500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001)
$124.13

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
Allis Chalmers 190XT Front Rim
Front Rim
- This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Part No: FW55166)
$65.55

Allis Chalmers 190XT Rear Rim Carriage Head Bolt and Nut
Rear Rim Carriage Head Bolt and Nut
- 2.5 length, 5/8 diameter FF Carriage Head Bolt with nut. PRICED EACH. (Part No: HB250)
$3.75

Allis Chalmers 190XT Stop Body
Stop Body
- Fits various tractors models with power adjust rims. Replaces part numbers: 219456 and 70219456. (Part No: C0NN1057A)
$15.24

Allis Chalmers 190XT TIRE GAUGE
TIRE GAUGE
- Gauge has special oiling and pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350)
$11.79

Allis Chalmers 190XT TIRE GAUGE DIAL
TIRE GAUGE DIAL
- Precision Bourdon Tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG)
$13.07

Allis Chalmers 190XT Tire Bead Buster
Tire Bead Buster
- Handy for breaking the bead when removing tires. No electricity, pneumatics or hydraulics needed. (Part No: S.29300)
$429.75

No
Picture
Tire Gauge, Heavy Duty
- Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Brass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599)
$40.14

Allis Chalmers 190XT Tire Inner Tube
Tire Inner Tube
- This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Part No: 500X15TB)
$19.04

Allis Chalmers 190XT Tire Paint, Black
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

Allis Chalmers 190XT Tire Tube
Tire Tube
- For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Part No: WHS050)
$17.58

No
Picture
Tire Tube 24 Inch
- This 24 inch tire tube is used for all tractors with the following tires: 7.5 x 24, 8.3 x 24, and 9.5 x 24. (Part No: WHS060)
$42.21

No
Picture
Tire Tube 24 Inch
- This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Part No: WHS059)
$51.89

No
Picture
Tire Tube 28 Inch
- This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Part No: WHS058)
$44.71

No
Picture
Tire Tube 28 Inch
- This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Part No: WHS061)
$60.00

No
Picture
Tire Tube 32 Inch
- This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Part No: WHS062)
$48.74

No
Picture
Tire Tube 38 Inch
- This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for radial tires. (Part No: WHS064)
$53.48

No
Picture
Tire and Tube
- This 4.00 inch x 12 inch 3 rib tire comes with a tube and fit various tractor models. (Part No: 400x12-3)
$55.57

Allis Chalmers 190XT Tire, Three Rib
Tire, Three Rib
- Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 550X16)
$95.15

Allis Chalmers 190XT Tire, Three Rib
Tire, Three Rib
- Front Tire, 3 Rib, 6.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 650X16)
$89.70

Allis Chalmers 190XT Tire, Three Rib
Tire, Three Rib
- Front Tire, 3 Rib, 5.00 inches x 15 inches. Designed to be used with tube (part number 500X15TB). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 500X15)
$62.10

CategoriesAll 190XT Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
Allis Chalmers 190XT Manuals
190XT I&T Aftermarket Shop Manual 296 Pages (Part No: AC-202) $32.95

190XT Dsl, Covers the Dsl Pump and Fuel System ONLY Service Manual 120 Pages (Part No: AC_FUELINJ_SV) $29.95

190XT Dsl Series III, Covers the Dsl Pump and Fuel System ONLY Service Manual 120 Pages (Part No: AC_FUELINJ_SV) $29.95

190XT Gas and Diesel (Includes Series III) Service Manual 342 Pages (Part No: AC-S-1-90) $50.95

190XT Gas and Diesel (Includes Series III) Parts Manual 368 Pages (Part No: AC-P-190XT) $52.95

190XT G,D,LP Operators Manual 62 Pages (Part No: AC-O-190,190XT) $22.95

Miscellaneous Related Items
Hat
Allis Chalmers 190XT New Allis-Chalmers mesh
New Allis-Chalmers mesh
- Solid black hat with mesh back and plastic snap size adjuster featuring the new Allis-Chalmers logo. (Part No: NACM)
$13.95

Allis Chalmers 190XT New Allis-Chalmers flame
New Allis-Chalmers flame
- 100% cotton, 6 panel hat black with orange flames and new style Allis-Chalmers logo. (Part No: NAFL)
$19.95

Allis Chalmers 190XT Allis Chalmers solid black with sandwich brim
Allis Chalmers solid black with sandwich brim
- Black hat with white accents and sandwich brim, 65% polyester, 35% cotton. (Part No: ACSBS)
$13.95

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

[Categories]   [All Allis Chalmers Models]   [Print]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy