Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers 185 Parts

Category: Steering

[Categories]   [All 185 Parts]   [All Allis Chalmers Models]  


No
Picture
Front Axle Bushing
- For tractor models 160, 170, 185, 9130, 9150, 9170, 9190. (Part No: 72160032)
$22.71

Allis Chalmers 185 Pivot Pin Assembly
Pivot Pin Assembly
- Includes: 70916896 (7/8 inch NF slotted nut) and 70925721 (5/32 inch X 2 inch cotter pin). For tractor models (170, 175 gas with roll shift front axle), (180, 185, 190, 190XT, 200, D19 all with roll shift front axle), (D17 serial number 38136 and up with roll shift front axle). (Part No: 70235154)
$32.32

Allis Chalmers 185 Spindle Bushing
Spindle Bushing
- Used on spindle 70237434, on tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Part No: 70211743)
$15.98

Allis Chalmers 185 Spindle Support Knee, LH
Spindle Support Knee, LH
- With the spindle with 12 inch vertical shafton the following models: (180, 185 Hi clearance), (190, 190XT, 190XT III, 200 all std.). (Part No: 70257604)
$329.85

No
Picture
Spindle Support Knee, RH
- For tractor models (180, 185 Hi clearance), (190, 190XT, 190XT III, 200 all std.). (Part No: 70257605)
$317.40

Allis Chalmers 185 Spindle Thrust Washer
Spindle Thrust Washer
- For tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Part No: 70218762)
$5.36

Allis Chalmers 185 Spindle, LH\RH
Spindle, LH/RH
- This spindle measures A=14 inch, B=1.610 inch, C=1.625 inch, D=1.187 inch. For tractor models 180, 185, 190, 190XT, 200, D19. Uses wheel bearing kit part number WBKAC2. (Part No: 70262782)
$193.68

Allis Chalmers 185 Spindle, LH\RH
Spindle, LH/RH
- This spindle measures A=12 inches, B=1.610 inches, C=1.625 inches, D=1.187 inches. For tractor models 170 Late, 175, 180, 185, D15, D17. Uses wheel bearing kit part number SBKAC2. (Part No: 70270038)
$171.42

Allis Chalmers 185 Steering Arm, LH
Steering Arm, LH
- Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Part No: 70245867)
$136.74

Allis Chalmers 185 Steering Arm, RH
Steering Arm, RH
- Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Part No: 70245868)
$136.74

No
Picture
Steering Motor, Hydraulic
- For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, D21. (Part No: 70271316)
$488.30

No
Picture
Steering Wheel
- 15-3/4 inches in diameter, 36 spline, 7 inches deep. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7030, 7040, 7050, 7060, 7080, 7580. Replaces 256852, 1142487. (Part No: 242933)
$131.83

No
Picture
Steering Wheel
- 16 inch diameter, 7 inch dish. Splined hub for tractor models: 170, 173, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050. Uses cap part number 70246722. (Part No: 70256852)
$40.56

No
Picture
Steering Wheel Cap
- Use with 242933 steering wheel. For tractor models 170, 180, 185, (190 from serial number 2485), 190XT, 200, 210, 220, 440, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7045, 7060, 7080, 7580. (Part No: 71362581)
$30.71

No
Picture
Steering Wheel Cap
- Clear cap with the AC Allis Chamers logo. Fits steering wheel part number 70256852. For tractor models 170, 173, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050. (Part No: 70246722)
$17.94

Allis Chalmers 185 Tie Rod Assembly
Tie Rod Assembly
- Consists of OEM part numbers 70250140 and 70250141. Replaces: 249418, 225280, 225279, 254662, 254661. For D14, D15, D17, D19, WD, WD45, 170, 175, 180, 185, 190XT, 200. Will fit if cut to proper length. (Part No: 70254660)
$50.67

Allis Chalmers 185 Tie Rod End, Female
Tie Rod End, Female
- 17.500 inches long. For tractor models 180, 185, 190, 190XT, 200. Will also fit 170, D14, D15, D17, D19 if cut to proper length. Can also replace 250142 used on WD, WD45 if cut to length. (Part No: 70254661)
$31.05

Allis Chalmers 185 Tie Rod Male
Tie Rod Male
- Tie rod end with tube, outer. For adjustable front axles. 16-1/2 inches to center of post. 0.812 inch diameter. 50 inch minimum thread, not for Hi-Clear. For 180, 185, 190, 190XT, 200, D17, D19. (Part No: 70254662)
$30.11



Allis Chalmers 185 Eaton Power Steering Pump Replacement
Eaton Power Steering Pump Replacement
- This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Part No: S03-1003)
$384.33

Allis Chalmers 185 Filter, Power Steering
Filter, Power Steering
- Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Part No: AE33538A)
$10.32

Allis Chalmers 185 Power Steering Pump Pulley
Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Part No: ABC1417)
$40.50

Allis Chalmers 185 Steering Wheel Spinner, Bare Aluminum
Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$7.13

Allis Chalmers 185 Steering Wheel Spinner, Black
Steering Wheel Spinner, Black
- Comes with mounting hardware. (Part No: R3276)
$7.26

Allis Chalmers 185 Steering Wheel Spinner, Blue
Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$7.20

Allis Chalmers 185 Steering Wheel Spinner, Green
Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$7.20

Allis Chalmers 185 Steering Wheel Spinner, Orange
Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$7.79

Allis Chalmers 185 Steering Wheel Spinner, Red
Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$8.75

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories]   [All 185 Parts]   [All Allis Chalmers Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2019 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy