FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers 170 Parts

[Categories] [All Allis Chalmers Models] [Print]

Brakes

Brake Band - Sold individually, 4 required per tractor. For tractor models 170, 175, 180, 185, 190, 190XT, 190XT III, (200 serial number less than 4000), (D17 serial number 42001 and above), D19, D21. Also replaces 70276940, 70235610, 70277438. (Item #: 105398, Ref: 70277379) $32.20

Brake Band Return Spring - For Allis Chalmers tractor models D17, 170, 175, 180, 185, Replaces Allis Chalmers OEM number 70250447, 70237220, 0.062" Wire Diameter, 0.510" O.D., 2.663" Overall Length, (Item #: 164314) $4.20

Brake Drum Assembly - For D17 serial number 42001 and up, 170, 175, 180, 185. Brake Drum Assembly with lining. Replaces 237418, 70237418, 70277325, 70277325SV (Item #: 105408, Ref: 70237418) $121.00

Brake Friction Plate - For tractor models 170, 175, 180, 185, D17. (Item #: 112222, Ref: 70237215) $112.00

Brake Lining - Lining kit for disc brakes. Includes lining and rivets for one disc and one drum. Non-Asbestos. Serial number 42001 and up, D17 Series IV. For tractor models 170, 175, 180, 185, D17. (Item #: 105399, Ref: 70237421) $39.40

Brake Plate Assembly, with Lining - 20 spline, 6.50 inch diameter. For tractor models 170, (D17 serial number 42001 and up). Also Replaces 70237208. (Item #: 105410, Ref: 70277327) $229.00

Brake Shoe Linings with Rivets - Set of 2 brake shoe linings with rivets for one wheel. For 170, 180, 185, 190, D17 after serial number 42000, D19, D21. (Item #: 105404, Ref: BLKAD17) $28.70

Brake Shoe Spring - Diameter of wire is 0.088 of an inch, outside diameter is 0.525-0.666 of an inch, and has an overall length of 1.389 inches. 4 used per tractor, sold individually. For the following models: D17 (serial number 42001 and up), D19, D21, 170, 175, 180, 185, 190, 190XT, 200 (up to serial number 4000). Replaces 235609, 250435, and 70250435. (Item #: 162368, Ref: G48508) $7.40

Clutch

Clutch Disc - This 11 inch clutch disc is 4 button, spring loaded, 10 spline, 1.250 inch spline diameter. For tractor models 170, 175, (D17 serial number 75001 and up). (Item #: 172938, Ref: 70247859) $217.00

Clutch Disc - This Remanufactured 11 inch diameter, woven, 1-1/4 inch hub, 10 spline. For tractor models D17, D19, 170, 175. (Item #: 70241255) $184.96

Clutch Disc, Remanufactured, 70232241 - For Allis Chalmers tractor models D17 (Series IV s/n 75000-later), D19, 170, 175, Replaces Allis Chalmers OEM number 70232241, 70232870, 70232912, 70247859, Clutch Size: 11", Clutch Hub: 1-1/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, (Item #: 203372) $105.00

Clutch Disc, Remanufactured, 70232241 - For Allis Chalmers tractor models D17 (Series IV s/n 75000-later), D19, 170, 175, Replaces Allis Chalmers OEM number 70232241, 70232870, 70232912, 70247859, Clutch Size: 11", Clutch Hub: 1-1/4", Clutch Splines: 10, Clutch Center: Spring, Clutch Type: 4 Pads, For a New version of this sku use Item #: 172938, (Item #: 203377) $112.50

Clutch Disc, Remanufactured, 70232241 - For Allis Chalmers tractor models D17 (s/n 75000 - earlier), D19, 170, 175, Replaces Allis Chalmers OEM number 70232241, 70232870, 70232912, 70247859, Clutch Size: 11", Clutch Hub: 1-1/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 206309) $175.50

No
Picture
Clutch Hub, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70235678, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442347) $140.01

Clutch Inspection Plate - Fits B, C, CA, IB, D10, D12, D17, D19, WC, WF, 160, 170, 175. (Item #: 126139, Ref: 208465) $24.40

Clutch Kit - This single clutch kit contains a remanufactured, 11 inch, 30 spline, 2 inch hub pressure plate assembly, a remanufactured 11 inch, 10 spline, 1 � inch hub, woven clutch disc, new release bearing and new pilot bearing. For Tractors D17 Series IV serial number 75001 and up, 170, 175. Also replaces D242572K. (Item #: 202032, Ref: 70242572NC) $391.40

Clutch Plate - For Allis Chalmers tractor models D14, D15, D17 (Prior to Series IV), D17 (Series IV), D19, D21, 170, 175, 180 (s/n 12800-earlier), 185 (s/n 12800-earlier), 185 (s/n 12800-later), 190, 190XT, 200, Replaces Allis Chalmers OEM number 70257913, Plate / Circular, (Item #: 169710) $172.00

No
Picture
Cover Assembly - For Allis Chalmers tractor models D19, 170, 175, Replaces Allis Chalmers OEM number 70247860, (Item #: 166217) $238.00

Pilot Bearing - Clutch pilot bearing. For tractor models 170, 180, 190, D17, D19, D21, WD45. (Item #: 100023, Ref: 70527813) $5.80

Power Director Clutch Plate - For tractor models D14, D15, D17, D19, 170, 175. (Item #: 168848, Ref: 70230015) $168.00

Power Director Clutch Plate - Used on Allis Chalmers D15, D17, D19, D21, 170, 175 below serial number 5461, 180 below serial number 12800, 185 below serial number 12800, 190, 190XT, 190XT Series III, 200, and 7000. Replaces OEM numbers 70257672, 70261212 (Item #: 151816, Ref: 70261212) $42.40

Pressure Plate Assembly, Remanufactured, 70241253 - For Allis Chalmers tractor models D19, 170, 175, Replaces Allis Chalmers OEM number 70241253, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 173131, (Item #: 204580) $219.26

Pressure Plate Assembly, Remanufactured, 70242572 - For Allis Chalmers tractor models D17 (Series IV s/n 75000-later), 170, 175, Replaces Allis Chalmers OEM number 70242572, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 2", Pressure Plate Spline: 30, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 203378) $186.76

Pressure Plate, 11 - 30 splines, 1.9875 inch spline diameter, 1.437 inch flywheel step. For tractor models 170, 175, (D17 serial number 75001 and up). (Item #: 172442, Ref: 70242572) $439.00

No
Picture
Pressure Plate, 11 inch without Hub - For tractor models 170, 175, D19. (Item #: 173131, Ref: 70241253) $366.00

Release Bearing - Clutch Release Bearing. For tractor models 170, 175, 210, 220, 7000, D17, D21. 2.50 inch inside diameter, 4.125 inch outside diameter, 0.870 inch width. Replaces: 260803, 70260803. (Item #: 112189, Ref: N1585) $23.20

Cooling System

Belt - This Fan Belt measures 1/2 inch wide and 48 5/8 inches long. For Diesel models 170, A, A2, C, D19, WD45. Verify measurements before ordering. (Item #: 123127, Ref: 378113R2) $7.20

No
Picture
Fan Belt - This fan belt measures 47.27 inches, Width .531 inch, fits 170, 175 both with gas engines. Please verify measurements before ordering (Item #: 118451, Ref: 70248316) $8.60

Fan Blade, 5 Blade - 17-1/2 inch diameter, 1-1/16 inch pilot hole, mounting holes on 1-1/4 inch centers. For tractor models (170, 175 gas), (D17, D19, WD45 gas or diesel), WC, WF. (Item #: 173464, Ref: 70240973) $93.00

No
Picture
Gasket - Thermostat - For Allis Chalmers tractor models D17, WC, WD, WD45, WF, 170, 175, Compatible with Allis Chalmers Lawn and Garden (s) 616, Replaces Allis Chalmers OEM number 70210158, (Item #: 164294) $8.00

Radiator Cap - Allis Chalmers, 228545, 228722, A39359, A45176, G45179 - For Allis Chalmers tractor models B (s/n 61221-later), C (s/n 18580-later), CA, D10, D12, D14, D15, D17, D19, D21, G, WC (s/n 74430-later), WD, WD45, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, Compatible with Allis Chalmers Construction and industrial models H3, HD3, I40, I60, I400, I600 Replaces Allis Chalmers OEM number 70228545, 70228722, 70228817, 70254891, , Compatible with Case Construction and industrial models W3, 210B, 310, 320, 430, 430CK, 480, 480B, 480C, 480CK, 530, 530CK, 545, 580, 580B, 580BCK, 580C, 580CK, 584, 584C, 585, 585C, 586, 586C, Replaces Case OEM number A39359, A45176, G45179, Chrome Plated, 2.239" Inner cap I.D, 2.895" Outer cap shell O.D., 0.582" Tang width, 1.485" I.D. sealing area, 4 PSI (for pressurized systems), (Item #: 113099) $26.30

Radiator Cap, Pressurized - This 4 pound pressurized cap is for tractor models using a pressurized cap: Late B, C, CA, WC, WD, WD45, WF, D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 70228545, 70228722, 70228817, 70254891. (Item #: 110011, Ref: 70254891) $7.20

Radiator Hose, Lower, Diesel - 1.5" I.D.. For tractor models (170, 175 with diesel engine). (Item #: 159547, Ref: 70249756) $21.40

Radiator Hose, Lower, Gas - 1.50 inch inside diameter. For tractor models (170, 175 with gas engines). (Item #: 159549, Ref: 70249760) $9.40

Radiator Hose, Upper, Diesel - 1.875 inch inside diameter. For tractor models (170, 175 with diesel engine). (Item #: 159546, Ref: 70249755) $8.80

Radiator Hose, Upper, Gas - 1.50 inch inside diameter. For tractor models (170, 175 with gas engine). (Item #: 159548, Ref: 70249759) $14.80

Thermostat - 180 degree. For tractor models 170, 175, B, C, CA, D14, D17, WD, WD45. All with gas engines. (Item #: 110455, Ref: 70229927) $18.60

Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: B with engine serial number 126210 and up, when equipped with water manifold bypass. Models: C and CA with engine serial number 195136 and up, when equipped with water manifold bypass. Models: D10, D12, D14, D15, D17, I40, I400, I60, I600, WD45, 170, and 175 gas or LP. This thermostat does not come with a gasket. Replaces part numbers 226505, 229927 70229927. (Item #: 110010, Ref: R1852) $40.00

No
Picture
Thermostat Cover, Used - For Allis Chalmers tractor models D17, WD45, 170, 175, Replaces Allis Chalmers OEM number 70231440, 226319, 227017, 231440, 262804, 70226319, 70227017, 70262804, For a new version of this item use Item #: 179330, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 455164) $39.01

No
Picture
Thermostat Gasket - For tractor models 170, 175. Replaces 36834147, 745106V1. (Item #: 155330, Ref: 70254490) $10.10

Thermostat Housing Bypass Cover - This new Thermostat Housing Bypass Cover fits Allis Chalmers D17, WD45, 170, 175 all with Gas. Uses Gasket 70210158, not included. It Replaces: 226319, 227017, 231440, 262804, 70226319, 70227017, 70231440, Housing: 70262804 (Item #: 179330, Ref: 70262804) $75.00

Thermostat, 160 Degrees - This is a 160-degree thermostat. Used on Allis Chalmers B with engine serial number 126210 and up, using 4 bolt thermostat housing, C with engine serial number 60157 and up, using 4 bolt thermostat housing, CA with engine serial number 195136 and up, using 4 bolt thermostat housing, D10 Gas, D12 Gas, D14 Gas, D15 Gas, D17 Gas, WD45 Gas, I400 Gas, I60 Gas, I600 Gas, 170 Gas, 175 Gas, H3 Gas. Replaces 1002521M91, 185201M2, 226372, 228543, 70226372, 70228543, 830873M93, A11493, A28114, TG10608 (Item #: 150677, Ref: 226372) $23.40

Water Bypass Hose - Used on Allis Chalmers D17, 170, 175, this hose has a 3/4 inch inside diameter on both ends. Used on Gas and LP tractors. Replaces OEM part number 229341, 70229341 (Item #: 164306, Ref: 70229341) $14.70

Water Pump - For 170, 175 diesels using Perkins engines. Water pump assembly, less pulley. (Item #: 101973, Ref: 79003714LBH) $42.60

Water Pump Gasket, Outlet - For Allis Chalmers tractor models D19, D21, 170, 175, 180, 185, 190, 200, 210, 220, 7000, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 740251062, For water pump use 100039, (Item #: 153403) $2.30

Water Pump Gasket, Pump to Plate - For Allis Chalmers tractor models D19, D21, 170, 175, 180, 185, 190, 200, 210, 220, 7000, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 74026887, Pump to Plate, For water pump use 100039, (Item #: 153402) $9.80

Water Pump O-Ring - For Allis Chalmers tractor models D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, Replaces Allis Chalmers OEM number 70923971, For water pump use 100040, (Item #: 153397) $1.90

Water Pump with Single Pulley - Replaces 129433 casting number 229465. For tractor models 170, 175, D17 all with gas engines. Replaces 79003710, 129433, 70229465 (Item #: 100037, Ref: 79003710) $118.00

Water Pump, Less Pulley - Has a 3/4 diameter shaft. For tractor models 170, 175. Replaces 41312575, 3640565M91, 41312911, 739184M91, 41312292, D9003714N, 740430M91, 41313201, 3637411M91, 41312908, 41313225, 41312554, 41312915, 41312296, U5MW0104, 4131A013, 3641219M91, 4131A029, 3641832M91, 41312551, 743064M1, 740564M91, 739532M91, 737439M91, 6631515, 6005005033, 41313232, 41313231, 41313225, 41313201, 41312915, 41312913, 41312911, 41312756, 41312564, 41312562, SW00454, 41312554, 41312552, 41312489, 41312366, 41312323, 743064M91, 41313232, 41312251, 9003714, 4131A021, 41312689, 41312551, 41312246, 41312161, 4131A021, 37711630N, 3641219M1, 3637411R91, 02100066, 4131A034, 41312552, 41312561, 4131225, 3118125R91, 41312351, 41312563, 736055M92, 79003714, U5MW0104, 748073M91, 37711630, 4131A013, 37711630, 3637411M1, 3641832M1, 02101786, 4131A032. (Item #: 101973, Ref: 3637411M91) $42.60

Decals and Emblems

No
Picture
Crop Hustler Decals - One pair. For tractor models 170, 175, 180, 185, 190, 190XT, 200. (Item #: 183306, Ref: R0672) $23.60

No
Picture
Decal Set - Hood Only Decal Set for Allis Chalmers Model "170" with Black Stripe. (Item #: 183432, Ref: R2619) $61.00

No
Picture
Decal Set - Complete set for Allis Chalmers Model "One-Seventy". Black Letters on a White Background (Item #: 183085, Ref: R2620) $179.00

$Allis Chalmers 170 Decal, 2-1\2 inch Diamond, Blue Background, Mylar$
Decal, 2-1/2" Diamond, Blue Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 2-1/2" Blue Background, Mylar decal, (Item #: 100149) $3.50

$Allis Chalmers 170 Decal, 2-1\2 inch Diamond, Orange Background, Mylar$
Decal, 2-1/2" Diamond, Orange Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 2-1/2" with Orange Background, Mylar decal, (Item #: 100148) $3.50

Decal, 6" Diamond, Blue Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Blue Background, Mylar decal, (Item #: 100147) $5.30

Decal, 6" Diamond, Orange Background, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Orange Background, Mylar decal, (Item #: 100146) $5.30

No
Picture
Decal, Blue with Border, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers w/Border, Blue, Mylar decal, (Item #: 100145) $8.80

Decal, Blue with Long A&S, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, W/O Border, Long A&S, Blue, Mylar decal, (Item #: 100143) $8.80

$Allis Chalmers 170 Decal, Triangle, Black and Orange with White Background, 1-1\2 inch x 1-1\2 inch, Mylar$
Decal, Triangle, Black and Orange with White Background, 1-1/2" x 1-1/2", Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, 1 1/2" x 1 1/2", Black and orange on white background, Mylar decal, (Item #: 100162) $2.70

Diamond Decal, 6" Clear, Mylar - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, IB, RC, WC, WD, WD45, WF, 160, 170, 175, 180, 185, 190, 200, 210, 220, 5030, 5040, 5050, 7010, 7020, 7045, 7050, Allis Chalmers Diamond, 6" Clear Background, Mylar decal, (Item #: 100173) $5.30

No
Picture
Diesel Decal - Individual, creme lettering on black. For Models: 160, 170, 175, 180, 185, 190, 190XT, 200. (Item #: 183254, Ref: R0671) $9.90

No
Picture
Landhandler Decals - One pair. For tractor models 170, 180, 190, 190XT, 210, 220. (Item #: 183309, Ref: R0673) $23.60

Drive Train

First and Second Mainshaft Gear - For tractor models D17, 170, 175. First and Second Mainshaft Gear. (Item #: 172764, Ref: 70232532) $176.00

Gear Shift Boot - For tractor models D17, D19, 170, 175, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070. (Item #: 115401, Ref: 233767) $9.70

Idler Gear, Used - For Allis Chalmers tractor models 170, 175 Replaces Allis Chalmers OEM number 70251060, 734738M91, , Compatible with Massey Ferguson tractor models 30, 31, 165, 174-4, 175, 180, 184-4, 194-4, 255, 261, 265, 265S, 270, 274-4, 275, 282, 283, 285S, 290, 294-4 (s/n 223000321-earlier), 374S (s/n D03066-earlier), 384S (s/n D03066-earlier), 394S (s/n D03066-earlier), 670, 690, 3050, 3060, 4225, 4235, 4240, Compatible with Massey Ferguson Construction and industrial models 50C, 50D, 50E, 50F, 50H, 50HX, 60, 60H, 220, 6500, Compatible with Massey Ferguson Hay Cutting(s) 885, Replaces Massey Ferguson OEM nos 734738M91, Replaces Casting nos 31171500, Teeth: 63, For a new version of this item use Item #: 167783, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446639) $58.01

No
Picture
Idler Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70231942, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454696) $100.01

No
Picture
Idler Shaft, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70231939, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453931) $50.01

Inner Upper Final Drive Shaft Seal - This�inner upper final drive shaft seal has a 1.5 inch Inside Diameter, a 2.38 inch Outside Diameter and is 0.315 inch wide. It Fits: 616, 622, 801, 802, D17, WD, WD45, 170, 175, 180, 185. Replaces: 218450, 227850, 229726, 229967, 70218450, 70227850, 70229726, 70229967 (Item #: 121742, Ref: AT344T) $12.00

Input Shaft - This Input Shaft is for tractor models D17, D19, 170, 175. Transmission Input Shaft is 21 - 20 - 8 Tooth. 9.92 inches in total length. (Item #: 174273, Ref: 70239530) $219.00

Reverse Gear - For D17, 180, 185, 190, 190XT, 200, (170, 175 without shutle clutch). Reverse Gear. (Item #: 167877, Ref: 70232529) $187.00

No
Picture
Reverse Idler Shaft, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70232836, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453945) $83.01

Second Mainshaft Gear - For tractor models D17, 170. Second Mainshaft Gear. (Item #: 172765, Ref: 70232408) $224.00

Third Gear - For tractor models D17 serial number 24001 to 71326, D19 up to serial number 15151, 170, 175. Third Gear has 27/8 Teeth. VERIFY TOOTH COUNT. (Item #: 172763, Ref: 70240940) $285.00

Third and Fourth Gear Coupling - For D17, D19, 170, 175, (WD, WD45 both serial number 127007 and up). Third and Fourth Gear Coupling (Item #: 172618, Ref: 70232452) $140.00

Electrical System

Alternator with Tach Drive - This is a 12 volt 63 amp alternator. It is internally regulated and comes with fan and pulley. This alternator can be used to replace original generator. Additional brackets and hardware may be needed. NOTE, for Allis Chalmers application, the tach drive needs to be replaced with part number 720046764 to have the correct gear ratio. Use part number ADR9209 to make this a single wire self exciting alternator (not included). Replaces 02453306, 90048463 (Item #: 164228, Ref: ADR0382) $140.00

No
Picture
Condenser - For Allis Chalmers tractor models 170, 175, 180, 185, 190, 190XT, Compatible with International tractor models 454, 464, 544, 574, 674, Compatible with John Deere tractor models 1010, 2010, 2020, 2510, 3010, 3020, 4000, 4010, 4020, 4230, Compatible with Massey Ferguson tractor models 35, 50, 65, 135, 150, 165, 175, 180, 205, 255, 265, 285, 1100, 2135, 2200, 3165, Compatible with Massey Ferguson Construction and industrial models 20, 40, 202, 203, 204, 302, 304, 2200, 2220, 3165 Replaces Massey Ferguson OEM number 1024924M91, , Compatible with Minneapolis Moline tractor models G900, G950, G1000, G1050, G1350, G1355, Jet Star 3, M670, U302, Compatible with Oliver tractor models 1600, 1800, 1900, Replaces Case IH OEM number 702325R91, All models listed with Delco distributors with screw held cap, (Item #: 173747) $3.90

Distributor Dust Cap - Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Item #: 125927, Ref: 1960325) $13.60

Distributor, Remanufactured, Delco Remy, 1112688 - For Allis Chalmers tractor models 170, 175, Replaces Delco Remy manufacturer number 1112688, Includes; New distributor cap, points, condenser, and all other parts needed for a thorough rebuilt unit, For Tune-Up Kit use Item #: 125927, (Item #: 205622) $331.01

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - Fits 170 and 175 with 4-cylinder 226 CID engines using Delco Distributor number 1112688. 12 Volt Negative ground. Replaces points and condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increase horsepower, improve fuel economy. Replaces points and condenser with an electronic module. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. (Item #: 185536, Ref: 1146A) $143.00

Flasher Unit - 12 volt, round, 2 terminal, 4 light max. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5045, 5050, 6040, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8550, D21. (Item #: 114128, Ref: 70248109) $4.94

Key Switch - 5 terminal, 3 position, with keys. For tractor models 170, (D15 from serial number 9001 and up with Indak switch), (D17 from serial number 75001 and up), 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces 241965. (Item #: 128485, Ref: 233759) $15.70

Light Switch - For tractor models 160, 170, 175, 180, 185, 190, (190XT from serial number 19001 and up), 200, 210, 220, 6040. Replaces 70249142, 70249142V, 249142 (Item #: 113760, Ref: 249142) $17.35

Light Switch Plate - For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6040. (Item #: 113759, Ref: 249141) $17.90

Neutral Starting Switch - This neutral starting switch has an overall length of 2.575 in, with 2 spades, and 5/8-32 thread. It is used on Allis Chalmers models: 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 4W220, 4W305, 616, 5040, 5045, 5050, 6040, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550. Replaces 10A25817, 12169C1, 16169C2, 12169C3, 2122233SM, 22-228, 22-642, 248659, 30-318739, 35A12407, 382728R91, 5021522YP, 532682R1, 70248659, 72161934, 83954C91, AH98872 (Item #: 164031, Ref: AH98872) $30.00

No
Picture
Point Set - For Allis Chalmers tractor models 170, 190 Replaces Allis Chalmers OEM number 74056705, , Compatible with Gleaner Combine (s) F, K, Compatible with John Deere tractor models 1010, 2010, 3010, 3020, 4000, 4010, 4020, Compatible with John Deere Construction and industrial models 500, 500A, 500B, 600 Replaces John Deere OEM number AR31814, AR44864, , Compatible with Massey Ferguson tractor models 35, 50, 65, 135, 150, 165, 175, 180, 255, 265, 1100, Compatible with Massey Ferguson Combine (s) 410, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 50, 2135, 3165, Replaces Massey Ferguson OEM number 1024923M91, 1750877M91, Services Delco distributor with screw held cap, (Item #: 173565) $5.30

Solenoid, 12 Volt - This is a 3 Post 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. For tractor models D10, D12, D14, D15, (D17, D19, 170, 180 with 1107695 starter) D21 all with gas engines and Delco starters. Replaces Delco DR1467, OEM 237136, 233296, 70237136, 910687. May come in a silver metal casing versus black plastic. (Item #: 150223, Ref: DR1467) $19.20

Starter - This is a new Delco 10MT style starter and is 12 volt, 9 teeth with clockwise rotation. It fits Allis-Chalmers models D17, k 170, 175 and the Gleaner Combine E, E3. replaces Delco 1107695. OEM 79004823, 70229492, 10461668, 10464668, 229492 (Item #: 160370, Ref: 1107695) $279.11

No
Picture
Starter - For tractor models 170 Diesel Combines 1967 to 1972, 248 Diesel 1975 to 1978, 170 Diesel 1967 to 1974, 175 Diesel 1967 to 1980. (Item #: 203608, Ref: 1107859) $353.00

No
Picture
Starter - Delco Style DD (4157), Remanufactured, Delco Remy, 1107695 - For Allis Chalmers tractor models D17, 170, 175, Compatible with Allis Chalmers Engine (s) 226, Compatible with Gleaner Combine (s) E, E3, Replaces Delco Remy manufacturer number 1107695, 1109384, Replaces manufacturer number 4157, 140-0921, 91-01-3659, 140-0921A, Delco Style: Direct Drive, Voltage: 12, Rotation: Clockwise, Teeth: 9, For a New version of this sku use Item #: 160370, (Item #: 203152) $411.90

Starter - Delco Style DD (4267) - For Allis Chalmers tractor models 170, 175, Replaces Allis Chalmers OEM number 70249694, 79004848, Replaces manufacturer number 1107859, 1108696, 1998341, 1998349, 2200073-64, 3004558, 3004558R, Delco Remy Direct Drive, Volts: 12V, Family: 27MT, Power (kW): 1, Rotation: Clockwise, Tooth Count: 10, (Item #: 168693) $358.70

Starter Nose Cone - Used on Delco starters 1107695 or 1109384 with two bolt mounts, these starters were original equipment on Allis Chalmers D17, 170 and 175 gas and LP. (Item #: 111665, Ref: 1940960) $107.14

Switch Plate - For Allis Chalmers tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220 (Diesel Only), Replaces Allis Chalmers OEM number 70242398, (Item #: 126739) $17.30

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch, number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch and manifold heater switch. Replaces: 227029, 240962, 242988, 245866, 245936, 253322, 70253322, 71191589, 72160068. (Item #: 121141, Ref: R7994) $13.40

Tune-up Kit - Kit, with preassembled points, for Delco distributor with screw held cap. For 170, 190, F, K (Item #: 105278, Ref: ATK10DSR) $11.30

No
Picture
Voltage Regulator - Voltage regulator, 12-volt. For 170, 180, 190, D21 (Item #: 105289, Ref: 70243986) $20.50

Voltage Regulator - Voltage regulator, 12-volt. For Allis Chalmers tractors using Delco alternators Following Delco Alternators: 1100553, 1100557, 1100558, 1100566, 1100567, 1100568, 1100569, 1100570, 1100572, 1100590, 1100591, 1100662, 1100742, 1100750, 1100751, 1100778, 1100780, 1100787, 1100790, 1100791, 1100796, 1100797, 1100804, 1100810, 1100816, 1100817, 1100818, 1100834, 1100836, 1100837, 1100838, 1100839, 1100842, 1100843, 1100845, 1100846, 1100847, 1100849, 1100851, 1100856, 1100860, 1100870, 1100871, 1100875, 1100879, 1100883, 1100885, 1100886, 1100888, 1100889, 1100891, 1100892, 1100893, 1100895, 1100896, 1100905, 1100907, 1100908, 1100910, 1100916, 1100917, 1100921, 1100931, 1100932, 1100933, 1100939, 1100943, 1100944, 1100951, 1102943, 1102944, 1102945, 1119507. Replaces: 243986, 70243986, 72072955 (Item #: 105289, Ref: 1031060M91) $20.50

No
Picture
Voltage Regulator, 12 Volt - For tractor models D21, 190XT, 160, 170, 175, 180, 185, 190, 200. Replaces 1100822, 1100710. (Item #: 105289, Ref: 581710) $20.50

Engine Bearings

No
Picture
Bearing Retainer, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70235252, Replaces Allis Chalmers Casting nos AM4984, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454138) $40.01

Connecting Rod Bearing - .002" Oversize - Journal - For Allis Chalmers tractor models D17, WC, WD, WD45, 170, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201, 226, Bearing size: .002" oversize, Sold per journal, For Standard connecting rod bearing use Item #: 105946, (Item #: 105942) $23.60

Connecting Rod Bearing - .030" Oversize - Journal - For Allis Chalmers tractor models D17, WC, WD, WD45, 170, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201, 226, Bearing size: .030" oversize, Sold per journal, For Standard connecting rod bearing use Item #: 105946, (Item #: 105945) $15.90

Connecting Rod Bearing - .040" Oversize - Journal - For Allis Chalmers tractor models D17, WC, WD, WD45, 170, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201, 226, Bearing size: .040" oversize, Sold per journal, For Standard connecting rod bearing use Item #: 105945, (Item #: 105946) $23.60

Main Bearing Set, 226 Gas, .010 - .010 inch. For tractor models D17, 170 with G226 gas engine. (Item #: 105953, Ref: MBK-D17-010) $143.00

Main Bearing Set, 226 Gas, .020 - .020 inch. For tractor models D17, 170 with G226 gas engine. (Item #: 105954, Ref: MBK-D17-020) $151.00

Main Bearing Set, 226 Gas, STD - Standard size with flanged thrust bearing. For tractor models D17, 170 with G226 gas engine. (Item #: 105952, Ref: MBK-D17) $121.44

Main Bearings - .030" Oversize - Set - For Allis Chalmers tractor models D17, 170, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 226 (Gas), Bearing size: .030" oversize, Sold in complete sets, For Standard main bearing use Item #: 105954, (Item #: 105955) $63.00

Power Director Clutch Plate, Used - For Allis Chalmers tractor models D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 7000, Replaces Allis Chalmers OEM number 70257672, 70261212, 7" O.D., 3.89" I.D., 32 Tooth, For a new version of this item use Item #: 151816, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436045) $30.01

No
Picture
Rod Bearing Set - For W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). Available in standard, .010 or .020. Specify size when ordering. (Item #: 183874, Ref: CRK-AW) $56.00

No
Picture
Rod Bearing Set, .020 - .020 inch. For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Item #: 184565, Ref: CRK-AW-020) $100.00

Rod Bearing Set, Standard - For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). (Item #: 183874, Ref: CRK-AW) $56.00

Rod Bearing, .010 - .010 inch. For tractor models W, WC, WF, W25 (with 201 gas engine) and WD, WD45 (with 226 gas engine), D17 and 170 (with G226 gas engine). Single bearing. 4 required per engine. Replaces 70231126 (Item #: 105943, Ref: CRK-AW-010) $16.30

Rod Bearing, 201 Gas, .010 - Individual connecting rod bearings. .010 inch. For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Item #: 105943, Ref: 231125-010) $16.30

Rod Bearing, 201 Gas, .020 - Individual connecting rod bearings. .020 inch. For tractors: W, WC, WF, WD, WD45G, D17G, 170G. (Item #: 105944, Ref: 231125-020) $12.00

Rod Bearing, 201 Gas, STD - Individual Connecting Rod Bearings. Standard. For tractors: W, WC, WF, WD, WD45G, D17G, 170G, B, C, CA, RC. (Item #: 105941, Ref: 231125) $14.70

No
Picture
Rod Bearings, Early - For the early models with 2 inch journals. Only available in Standard. For tractor models W, W25, WC, WD, WD45, WF. Engine: 201 CID Gas This is 1 pair for 1 rod. Order 4 for complete engine. Oversize of .005 may be available.... call for availability. (Item #: 70223619) $25.73

Engine Gaskets

Crankshaft Seal, Front - For tractor models 170, 175, D17 with 226 CID gas engines. (Item #: 105961, Ref: 70229229) $9.50

Full Gasket Set - For WD45, D17, 170, 175 all with 226 CID gas engine. Comes with crank seals. (Item #: 105958, Ref: FS3162) $108.00

Head Gasket - Cylinder Head Gasket. For tractors: W, WC, WF, WD, WD45, D17, 170. All with gas engines. (Item #: 172517, Ref: 70229406) $45.50

Head Gasket Set - For GAS engine in: D17, W, W25, WC, WD, WD45, WF, 170, 175. Includes Upper gasket set with head gasket. (Item #: 105959, Ref: 70277286) $57.00

Oil Pan Gasket - 6 piece pan gasket set. For 201 and 226 CID 4 cylinder gas engines on: W, WC, WF, W25, WD, WD45, D17, 170. (Item #: 105960, Ref: 70229860) $13.50

Oil Pan Gasket Clips - For Allis Chalmers tractor models D17, WC, WD, WD45, 170, 175, Replaces Allis Chalmers OEM number 70229177, Set of 6, (Item #: 164311) $34.80

Rear Crankshaft Seal - For Allis Chalmers tractor models D17, 170, 175, Compatible with Allis Chalmers Construction and industrial models D (s/n 5424-later), M65 (s/n 200-later), TL10 (s/n 1800-later), TL11 (s/n 73-later), TL12 (s/n 1281-later), Compatible with Allis Chalmers Engine (s) 226 Replaces Allis Chalmers OEM number 70241294, , Compatible with Gleaner Combine (s) E, E3, (Item #: 105963) $11.00

Timing Cover Gasket - Used on Allis Chalmers Gas and LP models: D17, WC engine serial number above 72459 with 15 stud head, WD, WD45, WF engine serial number above 72459 with 15 stud head, 170, 175. Replaces 70277291, 70233214, 233214 (Item #: 187405, Ref: 70233214) $13.00

Engine Rebuild Kits

Cylinder Kit - For Allis Chalmers tractor model 170, Compatible with Massey Ferguson tractor model 174, 175, 180, 184, 255, 265, 274, 362, 374, 375, 384, 670, 3050, Compatible with Massey Ferguson Construction and industrial model 50, 50C, 6500, Replaces OEM number U5MK0123, Contains flanged sleeves with 4.065" o.d., (Item #: 128725) $77.00

Engine Parts

Camshaft Timing Gear - 54 teeth. 1.623 inch inside diameter press on style. For tractor models 170, 175, D17, W201 all with gas engines, and (W226, WD45 gas engine serial number 45-48556 and up). Replaces 70203923, 227038, 70227038, casting number: AM4175-1. (Item #: 113935, Ref: 70227038) $218.00

No
Picture
Camshaft Timing Gear, Used - For Allis Chalmers tractor models D17, WD45 (Gas engine s/n 45-48556-later), 170 (Gas), 175 (Gas), Replaces Allis Chalmers OEM number 70203923, 70227038, AM4175, 54 Teeth, For a new version of this item use Item #: 113935, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435633) $114.01

No
Picture
Clutch Center Plate, Used - For Allis Chalmers tractor models D14, D15, D17, D19, D21, 170, 175, Replaces Allis Chalmers OEM nos 70228040, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 448392) $48.01

No
Picture
Connecting Rod, Used - For Allis Chalmers tractor models D17, WC, WD, WD45, WF, 170, 175, Replaces Allis Chalmers OEM nos 70232569, Replaces Allis Chalmers Casting nos 232441, U3988, 232569, 229861, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454760) $50.01

Connecting Rod, Used - For Allis Chalmers tractor models 170, 175 Replaces Allis Chalmers OEM nos 71005060, 70251352, , Compatible with Massey Ferguson tractor models 175, 180, 184-4, 255, 265, 274, 275, 282, 294-4, 1100, 1130, 2675, Compatible with Massey Ferguson Combine(s) 510, 750, 850, Replaces Massey Ferguson OEM nos 738713M91, Replaces Casting nos 31337180, Diesel, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498694) $25.01

No
Picture
Countershaft Gear 3rd, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 190, 190XT, Replaces Allis Chalmers OEM nos 70247728, 70240939, Teeth: 23, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437484) $256.01

No
Picture
Crankshaft, Premium Used - For Allis Chalmers tractor models 170, 175 (Diesel), Replaces Casting nos 31315881, 31315981, 31315982, 31315991, 31315870, With Splined Nose, Lip Rear Seal, (Item #: 310248) $252.01

No
Picture
Crankshaft, Remanufactured, 229022 - For Allis Chalmers tractor models D17, 170 (Gas), Replaces Casting number 229022, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200009) $690.01

Crankshaft, Timing Gear - 27 teeth, For tractor models (D17, 170, 175, all gas), (W226, WD45 all gas engine serial number 45-11050. Inside diameter is 1.625 inches. (Item #: 172456, Ref: 70230217) $147.00

No
Picture
Cylinder Head with Valves, Remanufactured, 37116440 - For Allis Chalmers tractor models 170, 175, Compatible with Massey Ferguson tractor models 175, 180, 255, 265, 275, 290, 375, 383, 398, 3545, Replaces Casting number 37116440, 3711681A/2, 3711685A/2, 37116900, 3711694A/1, 3711694A/5, 3711696A/1, 37116990/1, 3711804A/1, Cylinders: 4, Casting No. 37116440, 3711681A/2, 3711685A/2, 37116900, 37116990/1, 3711694A/1, 3711694A/5, 3711696A/1, 3711804A/1, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 205180) $1175.01

No
Picture
Cylinder Head, Remanufactured, 3711604A - For Allis Chalmers tractor models 170, 175, Compatible with Massey Ferguson tractor models 175, 180, 255, 265, 275, 290, 375, 383, 398, Replaces Casting number 3711604A, 37116440, 3711681A/2, 3711685A/2, 3711694A/1, 3711694A/5, 3711696A/1, 37116990/1, 3711804A/1, Cylinders: 4, Casting No. 3711604A, 37116440, 3711681A/2, 3711685A/2, 37116990/1, 3711694A/1, 3711694A/5, 3711696A/1, 3711804A/1, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200511) $830.01

Cylinder Head, Used - For Allis Chalmers tractor models 170, 175, Compatible with Massey Ferguson tractor models 175, 180, 255, 265, 275, 290, 375, 383, 398, Replaces Casting number 3711604A, 37116440, 3711681A/2, 3711685A/2, 3711694A/1, 3711694A/5, 3711696A/1, 37116990/1, 3711804A/1, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200511, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400511) $315.01

No
Picture
Cylinder Kit - For Allis Chalmers tractor models D17, WD45, 170, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Replaces Allis Chalmers OEM number 70283605, 4.00" bore, (Item #: 166811) $113.00

No
Picture
Driven Gear, Used - For Allis Chalmers tractor models D17, WD, WD45, 170, 175, 190, 190XT, Replaces Allis Chalmers OEM nos 70232409, Teeth: 37, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437606) $165.01

Governor Gear - This new Governor Gear fits tractor models D17, 170 and 175 tractors with 226 cubic inch 4 cylinder gas with engines. Replaces: 229510, 70229510, Casting Number: AM4479 (Item #: 178939, Ref: 70229510) $141.00

Governor Weight - This Governor Weight D17, WC, WD, WD45, WF, 170, 175 with 201 or 226 cubic inch 4 cylinder gas with engines. Replaces: 229980, 70229980 (Item #: 164568, Ref: 70229980) $30.00

Governor Weight Pin and Clips - This Pin with Clips is used to secure part number 70229980. Two used per tractor. Sold individually. Replaces part numbers 70211368, 70207719, 211368, 207719 (Item #: 164569, Ref: 70211368) $10.00

Input Clutch Shaft, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM number 70239530, For a new version of this item use Item #: 174273, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454695) $124.01

Intake Valve - For Allis Chalmers tractor models D17, 170, 175, Replaces Allis Chalmers OEM number 70241535, (Item #: 166648) $9.40

No
Picture
Intermediate Drive Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70231941, Teeth: 27, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454691) $134.01

No
Picture
Lifter, Used - For Allis Chalmers tractor models D17, WC, WD, WD45, WF, 170, 175, Replaces Allis Chalmers OEM nos 70203017, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454263) $5.01

No
Picture
Lifter, Used - For Allis Chalmers tractor models 170, 175 Replaces Allis Chalmers OEM nos 70257402, , Compatible with Massey Ferguson tractor models 283, 290, 2680, 5425, 5435, 5445, 5455, Replaces Massey Ferguson OEM nos 4226515M1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454267) $6.01

No
Picture
Main Shaft Bushing, Used - For Allis Chalmers tractor models D19, 170, 175, Replaces Allis Chalmers OEM nos 70235255, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453869) $50.01

No
Picture
Main Shaft Collar - Splined, Used - For Allis Chalmers tractor models D17, D19, WD (s/n 127007-later), WD45 (s/n 127007-later), 170, 175, Replaces Allis Chalmers OEM nos 70230514, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453867) $118.01

No
Picture
Main Shaft Collar, Used - For Allis Chalmers tractor models D17, D19, WD (s/n 127007-later), WD45 (s/n 127007-later), 170, 175, Replaces Allis Chalmers OEM nos 70225944, Splined, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453862) $161.01

No
Picture
Main Shaft Coupler, Used - For Allis Chalmers tractor models D17, D19, WD (s/n 127007-later), WD45, 170, 175, Replaces Allis Chalmers OEM number 70232452, Spline Count: 8, For a new version of this item use Item #: 172618, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453868) $73.01

No
Picture
Main Shaft Gear - 1st and 2nd, Used - For Allis Chalmers tractor models D17, WD (s/n 127007-later), WD45 (s/n 127007-later), 170, 175, Replaces Allis Chalmers OEM number 70232532, Teeth: 34, For a new version of this item use Item #: 172764, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453863) $103.01

No
Picture
Main Shaft Gear, Used - For Allis Chalmers tractor models D17, D19, WD (s/n 127007-later), WD45 (s/n 127007-later), 170, 175, Replaces Allis Chalmers OEM nos 70226718, Teeth: 40, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453861) $480.01

No
Picture
Main Shaft Gear, Used - For Allis Chalmers tractor models D17, D19 (s/n 15151-earlier), 170, 175, Replaces Allis Chalmers OEM number 70240940, Teeth: 27, For a new version of this item use Item #: 172763, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453866) $173.01

Manifold Stud - 7/16" - 14NC x 7/16" - 20NF x 4-3/4" long. 6 used per engine, sold individually. For gas or LP Models: D17, 170, 175, (E, E3, K with 226 gas engines), 616, 622, 802, 802. (Item #: 178401, Ref: 70229339) $7.00

No
Picture
Pressure Plate, Used - For Allis Chalmers tractor models D14, D15, D17, D19, D21, 170, 175, Replaces Allis Chalmers OEM nos 70228067, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453984) $110.01

No
Picture
Pressure Washer, Used - For Allis Chalmers tractor models D14, D15, D17, D19, D21, 170, 175, Replaces Allis Chalmers OEM nos 70228037, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454903) $37.01

Pushrod - Pushrod, new. Sold individually. 11.017 inch overall length, 0.314 inch outside diameter. D17, WC, WD, WD45, WF, 170, 175 (with 201 CI, 226 CI gas/LP engines). Replaces: 70203018, 203018. (Item #: 178869, Ref: 70203018) $38.00

No
Picture
Reverse Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175, 190 (s/n 9001-earlier), 190XT (s/n 9001-earlier), Replaces Allis Chalmers OEM nos 70232530, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437485) $189.01

Ring Gear, Flywheel - Has 139 teeth, 14.0625 inch outside diameter. For D17, 170, 175 all with gas engine, W225 serial number PU96714 and up with gas engine. Flywheel Ring Gear. (Item #: 113676, Ref: 70226830) $37.40

Rocker Arm Support Stand - This new Cast Rocker Arm Support Stand fits D17, WD45, 170, 175 (WD, WF (engine serial number 253200 - 253489). Fits models above with 201 and 226 cubic inch gas engines; 4 used per tractor. Sold individually. Measures 1.945 inches tall with a 0.865 inch hole diameter. Please measure before ordering. Replaces Replaces: 224727, 225019, 70224727, 70225019. (Item #: 126110, Ref: 70225019) $40.00

No
Picture
Rocker Arm Support Stand, Used - For Allis Chalmers tractor models D17, WD, WD45, WF, 170, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL11, TL12, Compatible with Allis Chalmers Engine(s) 201 (Gas), 226 (Gas), Replaces Allis Chalmers OEM number 70225019, 1.945" Tall, 0.865" Hold Diameter, For a new version of this item use Item #: 126110, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435872) $20.51

No
Picture
Shift Rail - Reverse, Used - For Allis Chalmers tractor models D17, 170, 175, Replaces Allis Chalmers OEM nos 70229257, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454397) $83.01

Thrust Washer Set - For Allis Chalmers tractor models 170, 175, Compatible with Allis Chalmers Construction and industrial models 816, 816B, 840 Replaces Allis Chalmers OEM number 70251027, 70251026, , Compatible with Massey Ferguson tractor models 165, 174, 175, 180, 184, 194, 255, 265, 274, 275, 283, 285, 290, 294, 298, 362, 374, 375, 383, 384, 390, 390T, 393, 394, 398, 399, 670, 690, 698, 699, 1080, 1085, 1100, 1105, 1130, 1135, 2640, 2675, 2705, 3050, 3060, 3070, 3090, 3120, 3140, 3505, 3525, 3545, 3630, 3650, 3660, 4225, 4235, 4243, 4245, 4253, 4255, 4263, 4270, 6150, 6170, 6180, 8120, Compatible with Massey Ferguson Construction and industrial models 11, 31, 33, 50, 50B, 50C, 50E, 50H, 50HX, 60H, 70, 80, 300, 350, 470, 6500 Replaces Massey Ferguson OEM number 735337M1, 735338M1, , Compatible with Oliver tractor models 1850, Compatible with White tractor models 2-85, 2-88, 2-105, 2-110, Engines: Perkins Diesel 236, 248, 354, 2152, 236, G236, 318, 354.4 Turbo, 1006.6, 1004.4, For TH and TU Build Codes, (Item #: 107188) $6.70

Valve Guide - Exhaust - For Allis Chalmers tractor models D17, WC, WD, WD45, 170, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201 (gas), 226 (gas), Replaces Allis Chalmers OEM number 70229911, (Item #: 128625) $4.50

Valve Guide Intake - For Allis Chalmers tractor models D17, WC, WD, WD45, 170, Compatible with Allis Chalmers Engine (s) 201, 226, Replaces Allis Chalmers OEM number 70241536, (Item #: 128643) $5.90

Valve Rotator, Exhaust - Used on the following engines when equipped with Exhaust Valve Rotators: B116, B125, G138, G149, G160, W201, G201, G226, W226. Replaces OEM numbers 70224926V, 70224926, 224926. (Item #: 184379, Ref: 70224926) $31.80

Valve Spring - This valve spring is used on 125, 149, 201, 226 engines, on Allis Chalmers B, C, CA, D10 (series II), D12 (series II), D14, D15 (series II), D17, WC, WD, 170. Replaces 70206879, 206879 (Item #: 128606) $3.10

Valve Tappet - This Valve Tappet (Lifter) is used on Perkins: 1103A-33, 1103A-33T, 1103B-33, 1103B-33T, 1103C-33, 1103C-33T, 1103C-33TA, 1103D-33, 1103D-33TA, 1104A-44, 1104A-44T, 1104A-44TA, 1104C-44, 1104C-44T, 1104C-44TA, 1104C-E44, 1104C-E44T, 1104C-E44TA, 1106C-E60TA, A4.212, A4.236, A4.248, A6.354, AT4.236, AT6.354, T4.236, T6.354. Replaces 291962A1, 1481642, 4222069V1, 31434163, 4222069M1, 4226515M1, 740671M1, 3142U031, 31434163, 30-3181677, 70257402, 257402 (Item #: 165600, Ref: 740671M1) $6.90

Engine Pistons and Sleeves

Piston - 4.125" Overbore - Single Cylinder - For Allis Chalmers tractor models D17, WD45, 170, 175, Compatible with Allis Chalmers Construction and industrial models D (s/n 5424-later), TL10 (s/n 1800-later), TL11 (s/n 73-later), TL12 (s/n 1281-later), Compatible with Allis Chalmers Engine (s) 226 Replaces Allis Chalmers OEM number 70229718, , Compatible with Gleaner Combine (s) E, E3, Overbore: 4.125", Sold per cylinder, (Item #: 191123) $88.00

No
Picture
Piston Sleeve - For 4 1/8 inch bore piston. For tractor models (170, 175, D17 gas), W25, WC, WD, WD45, WF. (Item #: 173058, Ref: SW32) $77.00

No
Picture
Piston and Sleeve, Single Cylinder, Dished Piston - Overbore from 4 inches to 4-1/8 inches. For 226 CID Gas engine on: 170, 175, D17, WD45. Includes: "Dished" Piston, rings, pin, retainers, liner. FOR 1 CYLINDER. (Item #: 128701, Ref: SK155) $96.00

No
Picture
Piston and Sleeve, Single Cylinder, Flat Piston - Overbore from 4 inches to 4-1/8 inches. For 226 CID Gas engine on: 170, 175, D17, WD45. Includes: "Flat" Piston, rings, pin, retainers, liner. FOR 1 CYLINDER. (Item #: 128668, Ref: SK156) $145.00

Engine Rings

Piston Ring Set - For one piston. 4 inch standard bore. Comes with 3 compression rings 1/8 inch and 1 oil ring 3/16 inch. For tractor models (W, W25, WC, WD, WF all with 201 CID gas engines), (WD45, 170, D17 all with 226 CID gas engines). (Item #: 120692, Ref: 70230091) $33.40

Piston Ring Set - 4.125" Overbore - Single Cylinder - For Allis Chalmers tractor models D17, WC, WD, WD45, WF, 170, 175, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201 (gas), 226 (gas), Compatible with Gleaner Combine (s) E, E3, Compatible with International tractor models Super M, Super W6, W400, 400, Compatible with International Engine (s) C264 (gas), Overbore: 4.125", Compression Rings per Piston: (1) @ .094" and (2) @ .125", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .125", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - 4.125" Overbore - 4 Cylinder use Item #: 174370, (Item #: 120693) $47.30

Piston Ring Set - 4.125" Overbore - Single Cylinder - For Allis Chalmers tractor models D17, WC, WD, WD45, WF, 170, 175, Compatible with Allis Chalmers Construction and industrial models D, DG, M65, TL10, TL11, TL12, Compatible with Allis Chalmers Engine (s) 201 (gas), 226 (gas), Compatible with Gleaner Combine (s) E, E3, Compatible with International tractor models Super M, Super W6, W400, 400, Compatible with International Engine (s) C264 (gas), Overbore: 4.125", Compression Rings per Piston: (2) @ .094" and (1) @ .125", Oil Rings per Piston: (1) @ .250", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .125", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .250", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - 4.125" Overbore - 4 Cylinder use Item #: 174375, (Item #: 120694) $46.50

Exhaust System

Exhaust Pipe - This new bare metal Exhaust Pipe has 1-1/2 inch pipe thread and is 4 inches in length. It Fits D17 (Gas/LP serial number 32001 and up), 170 Gas, 175 Gas. It replaces original part numbers 234541 and 70234541. (Item #: 179318, Ref: 70234541) $15.60

$Allis Chalmers 170 Exhaust Stack - 1-15\16$
Exhaust Stack - 1-15/16 - For Allis Chalmers tractor models D17 (Gas), 170, 175 (Gas), Inlet I.D.: 1-15/16", Body: 3", Length: 29", Notched Inlet For Easy Installation, Double Wall Liner, Chrome, (Item #: 114791) $148.50

$Allis Chalmers 170 Exhaust Stack - 1-15\16 inch x 29 inch, Straight Chrome$
Exhaust Stack - 1-15/16" x 29", Straight Chrome - For Allis Chalmers tractor models D17 (Gas), 170, 175 (Gas), Inlet I.D.: 1-15/16", Body: 3", Length: 29", Notched Inlet For Easy Installation, Double Wall Liner, Chrome, (Item #: 114790) $93.50

No
Picture
Exhaust Stack - 2-3/8 - For Allis Chalmers tractor models D15 (diesel), D17 (diesel), D19, 170, 175 (diesel), 180 (gas/diesel), 185 (diesel), 190 (gas s/n 19001-later), Inlet I.D.: 2-3/8", Body: 3-1/2", Length: 29", Notched Inlet For Easy Application, Double Wall Liner, Chrome, (Item #: 114788) $135.00

$Allis Chalmers 170 Exhaust Stack - 2-3\8$
Exhaust Stack - 2-3/8 - For Allis Chalmers tractor models D15 (Diesel), D17 (Diesel), D19, 170, 175 (diesel), 180 (Gas and Diesel), 185 (Diesel), 190 (Gas SN 19001 and up), Inlet I.D.: 2-3/8", Body: 3-1/2", Length: 29", Notched Inlet For Easy Instaltion, Double Wall Liner, Chrome, (Item #: 114789) $161.00

Intake and Exhaust Manifold - For D17 series III, WC, WD, WD45, all with gas engine. Intake and Exhaust Manifold, non threaded outlet. Manifold has improved larger throat. Uses Muffler part number 70234494. Also replaces OEM number 70224782. Gasket set part number 70229958, included in this set. (Item #: 101479, Ref: 70229416) $160.00

Manifold - For gas models: D17 series IV, 170, 175. Has 1-1/2 inch pipe thread exhaust outlet. Gaskets NOT included. (Item #: 101483, Ref: 70257485) $188.00

Muffler - Gas, oval. For model 170. (Item #: 100051, Ref: 70249324) $82.00

Muffler - muffler, oval - diesel. For 170 (Item #: 100053, Ref: 79015994V) $71.00

Muffler - Vertical Exhaust Inlet inside diameter 1 15/16, outlet outside diameter 2 inches, overall length 34 inches. For 170, 175 Gas. OEM part number use R1751 clamp, use R1800 rain cap. (Item #: 100051, Ref: R1566) $82.00

Fuel System / Air Intake

Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Allis Chalmers it is used on Industrial: 60 (For choke cable bracket with Marvel Schebler carb # TSX591, TSX783, TSX815, TSX848, TSX853, TSX869, TSX871, TSX928), D15 (For choke cable bracket; SN: 9001 and up; with Marvel Schebler carburetor), D17 (For choke cable bracket; SN: 42001 and up; with Marvel Schebler carburetor), [ D19, 170, 175 (For choke cable bracket with Marvel Schebler carburetor) ], [ 7000, 7010, 7020, 7045, 7060, 7080, 7580 (For diesel fuel shut off cable brackets) ], [ Industrial: 500, 510, 512, 600, 612, 614, 621 (For choke cable bracket with Marvel Schebler carb number TSX591, TSX783, TSX815, TSX848, TSX853, TSX869, TSX871, TSX928) ]; Replaces: 70237169, 74047137, 29-81, B110-10 (Item #: 126116, Ref: CT29-81) $5.10

Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: Fits D17 (1956-63), 170, 100 Harvester, WD45 Crawler, 2 row cotton pickers, D-Graders, Replaces Marvel Schebler TSX464, TSX561, TSX773, TSX853, TSX869, TSX871, TSXU835, TSXU836, Replaces Zenith # 11588, 11973, 12032, 12217, 13153, 13154, 13294, 13795. Center to center on the 2 mounting bolts is 2 3/8 inches. Made in USA, 1 year warranty. (Item #: 100749, Ref: 14991) $560.00

Carburetor Float - This carburetor float is used in Allis Chalmers 170 and 175 with Zenith 13294 replacement, 180 with Zenith 13416 replacement, D17 with Zenith 11588 replacement, WD45 with Zenith 14991 replacement. This is float is for Zenith replacement carburetors, not original Marvel Schebler carburetors. (Item #: 108448, Ref: R4531) $24.40

Carburetor Kit, Basic - Kit for Zenith 13294, 11588, 12217, 12590, 12232, 13416 carbs used on 170, 180, D17, WD45. (Item #: 100741, Ref: Z104) $26.00

Carburetor Kit, Basic - Kit for Marvel TSX464, TSX561, TSX773, TSX871, TSX869, TSX928 used on 170, 180, 185, D15, D17, WD45. (Item #: 100734, Ref: MS102) $18.00

Carburetor Mounting Gasket - For Allis Chalmers tractor models D15, D17, D19, WD45, 170, 175, 180, 185, Replaces Allis Chalmers OEM number 70233209, Fits Marvel Schebler Carburetors TSX464, TSX561, TSX648, TSX773, TSX848, TSX863, TSX869, TSX871, TSX928, Fits Zenith Carburetors 11588, 12217, 12232, 12590, 13294, 13416, (Item #: 149795) $1.70

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 13294. For the following tractor models: 170, 175. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203231, Ref: 1132-CARB) $594.01

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. Includes bleeder port and screw. Replaces original part numbers 70251307, 70251315, 72089560. Replacement filter for this unit is CAV7111296. (Item #: 153129, Ref: 1446017M91) $34.00

Fuel Filter, CAV type - Fuel filter for tractor models 160, 170, 175, 4660, 5040, 5045, 5050, 5670, 5680, 6040, 6140, 6670, 6680, 6690, 4650. Replaces 70251397, 70252050, 72091264, 72099490 . NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $9.30

Fuel Injector Banjo Bolt - This Banjo Bolt is used on Perkins Engines with CAV type Injection Systems. It replaces original part numbers 731567M1, 95315, 067 - 6312, 70251292, 71011878. Uses 2 gaskets order part #921176. (Item #: 168628, Ref: 0095315) $1.60

Fuel Pump - This is a new 2 Bolt Mount Fuel Lift Pump used on Allis Chalmers; 170 up to engine serial number 236U93188, and 175 up to engine serial number 248U8332. Uses S40569 Repair Kit. It replaces original part numbers 251278, 276831, 70251278, 70276831. (Item #: 106200, Ref: D8NN9350AB) $22.50

Fuel Pump - This fuel lift pump is used on Allis Chalmers 170 and 175 tractors with 4.236 and 4.248 Perkins Engines. It replaces original part numbers 035 - 8006, 17400400, 17401000, 26411728, 2641709, 2641711, 2641713, 2641725, 2641728, 2641A053, 2641A071, 4222091V91, 4555699, 505508, 6005014391, 6668035, 70257232, 70272993, 7701031881, ULPK0001, ULPK0003. Uses S40567 Repair kit (Item #: 117603, Ref: 3637300M91) $22.80

Fuel Pump Repair Kit - For tractor models 170, 175. (Item #: 172699, Ref: 1883344M92) $20.60

Fuel Pump Repair Kit - This kit repairs 72080392, 70257232, 70272993 two and 4 bolt mount pumps. Replaces 17400401, 26410056, 26410096, 6668035, 70257231, 70272935, 71014735 (Item #: 165257, Ref: S40567) $17.90

Fuel Pump Repair Kit - This Fuel Pump Repair Kit is used to repair fuel pump part numbers: D8NN9350AB, 251278, 276831, 70251278, 70276831. Replaces original part number 70251393. (Item #: 172699, Ref: S40569) $20.60

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $5.95

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor.Used on Allis Chalmers B, C, CA, D10, D12, D14, (D15 Gas To Serial Number 9001), (D17 Gas to serial Number 42000), (D19 Gas To serial Number 12000), G, I40, I400, I60, I600, 170, 175, 180, IB, RC, WC, WD, WD45, WF. Replaces original part numbers 208362, 70208362. Gasket may be rubber or cork, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.70

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces 70237945 and 237945. Will fit the following models: B, IB, C, CA, G, D10, D12, D14, D15 (Gas To Sn#9001), D17 (Gas to Sn#42000), D19 (Gas To Sn#12000), RC, WC, WD, WD45, I400, WF, I600 (Gas), 170 (Gas), 175 (Gas), 180 (Gas). (Item #: 105382, Ref: 9N9162) $3.20

No
Picture
Fuel Sending Unit - For tractor models 170, 175. (Item #: 119770, Ref: 70249218) $47.10

Fuel Tank Cap - For Tractor Models B, C, CA, G, IB, RC, WD, D10, D12, D14, D15, D17, D19, I40, I400, I60, WC, WF, WD45, 170, 175, 180, 185, Backhoe: I600. Replaces: 253690, 70253690. This is a Non-Vented Cap. 7/8 inch outside diameter, 2 11/16 inch inside diameter, 1/4 inch high. Zinc Finish. 1.850 inches edge of tang to edge of tang. (Item #: 185782, Ref: D5NN9030A) $9.00

No
Picture
Fuel Tank Strap, Used - For Allis Chalmers tractor models 170, 175, Replaces Allis Chalmers OEM nos 70249214, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 454956) $50.01

Injector Line Leak Off - This Injector Line Leak Off Pipe is used on 4 cylinder Perkins Engines with CAV type fuel systems. It replaces 35587344, 734723M91, 035 - 8008, 70257263 (Item #: 165870, Ref: 35587344) $35.10

Injector Line Set - This kit contains Allis Chalmers Part Numbers: 70251295 No. 1 Cylinder Line Assembly (Perkins No. 35343025), 70251298 No. 2 Cylinder Line Assembly (Perkins No. 35343026), 70251299 No. 3 Cylinder Line Assembly (Perkins No. 35343027), and 71007687 No. 4 Cylinder Line Assembly (Perkins No. 35343028). It is used on 4 cylinder Perkins Engines with CAV type fuel systems on Allis Chalmers 170 and 175. Verify your parts number with parts manual. For Fuel Line Seal Kit order 187517 (Item #: 178167, Ref: S41522) $43.57

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $38.20

Injector Pump Repair Kit - Fits CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $19.00

Intake Manifold Heater - This Intake Manifold Heater (Thermostart, Glow Plug) is used in Diesel manifolds on Allis Chalmers 160, 170, 175, 5040, 5045, 5050, 6040, 8745, 8765; Replaces: 72080137, 72089442, 74910312 (Item #: 129233, Ref: 893501M1) $15.60

Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: D15 (serial number 9001 and up), D17, D19, H3 (serial number 6960 and up), WD45, I600, 170, 175. Replaces 226458, 233-543, and 70226458. (Item #: 179751, Ref: C3NN9D532A) $7.00

No
Picture
Oil Breather Cap, Used - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15, D17, D19, WC, WD, WD45, WF, 170, 175, 190, Compatible with Allis Chalmers Construction and industrial models I40, I60, I400, I600 Replaces Allis Chalmers OEM number 70200267, 70203196, 70205298, , Compatible with Case tractor models V, 200, 210B, 211B, 300, 311, 400, 410B, 411, 420, 430, 440, 441, 470, 500, 510B, 511B, 530, 531, 540, 541, 570, 580, 600, 610B, 611B, 630, 640, 641, Compatible with Case Combine(s) 660, Compatible with Case Construction and industrial models W3, W5, 310, Compatible with Case Hay Cutting(s) 1150 Replaces Case OEM nos A36608, VT3545, , Compatible with CockShutt / CO OP tractor models E3, 30, 40, 50, Compatible with International tractor models 354, 424, 2300A Replaces International OEM nos 364899R91, , Compatible with John Deere tractor models L, M, 40, 320, 330, 420, 430, 440 Replaces John Deere OEM nos AM1586T, AM494T, AM669T, , Compatible with Minneapolis Moline tractor models BF, BG, Jet Star, Jet Star 2, Jet Star 3, Super 4 Star, 4 Star, 335, 445, Replaces Minneapolis Moline OEM nos 1010278, 10A10401, Replaces Avery OEM nos AT576, VT106, Height: 3 1/4", "OIL" Is Stamped On Top Of Cap, Includes Copper Filter Element, For a new version of this item use Item #: 110064, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435465) $20.01

Precleaner Bowl - Clear plastic pre-cleaner bowl, for air intake on diesel models D2900, 649T prior to serial number 12201. (A) Bowl outside diameter at top: 10-1/2 inches. (B) Cone inside diameter at top: 5-9/16 inches. (C) Bowl side height: 3 inches. (D) Overall height: 4 inches. Large bowl 10-1/2 inch diameter, for 3 to 4 inch. For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, D21, G, L, L2, M, M2. (Item #: 107972, Ref: 70651270) $11.30

Sediment Bowl Assembly - Large bowl, single inlet type. Used on; (D15 Gas serial number 9001 and up and All Diesel using 2.315 Long Glass Bowl), (D17 Gas serial number 42001 and up and all Diesel using 2.315 Long Glass Bowl), (D19 Gas serial number 12001 and up and all Diesel using 2.315 Long Glass Bowl), (D21, WD45, 170, 175, 180, 185 all 2.315 Long Glass Bowl), (U Gas only using 2.315 Long Glass Bowl and single outlet ), (UC Gas only using 2.315 Long Glass Bowl and single outlet), (190, 190XT Gas, Diesel. Using 2.315 Long Glass Bowl). Fittings are 3/8 inch pipe inlet, 1/8 inch pipe outlet, 2.315 inch tall glass bowl. Replacement bowl available as part S.65504. Replaces: 237946 and 70237946. (Item #: 105393, Ref: S.61581) $22.00

Sediment Bowl Assembly - Fuel Strainer without valve. This sediment bowl assembly is used on Allis Chalmers G, 170 Gas serial number 7500 and Up, 175 Gas, 180 Gas. Replaces: 253122, 800069, 70253122, 70800069 (Item #: 112592, Ref: 614421R91) $30.50

Sediment Bowl Assembly - Small Bowl, 2 outlet type. A 1/8 Inch Pipe Plug will be needed if only one outlet is used. For Models: D10, D12, WC, WD, WD45, D15D, D17, D19, D21, 180, 170 diesel. (Item #: 105369, Ref: 70239167) $22.60

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: D15 Gas (SN: 9001 and up), and all diesel, D17 Gas (SN: 42001 and up) and all diesel, D19 Gas (SN: 12001 and up) and all diesel, D21, U, UC, WD45, 170, 175, 180, 185, 190, 190XT. Replaces 70237947V, 237947. (Item #: 105365, Ref: S.65504) $5.50

Sediment Bowl Bail with Brass Nut - For Allis Chalmers tractor models D15 (gas, s/n 9001-later), D17 (gas, s/n 42001-later), D19 (gas, s/n 12001-later), D21, U, UC, WD45, 170, 175, 180, 185, 190, 190XT Replaces Allis Chalmers OEM number 70223248, 223248, , Compatible with Case tractor models C, L (gas, 1939-earlier), LA (gas, s/n 4600027-earlier), LI (gas, 1939-earlier), 400, 410, 411, 412, 700, 730CK, 800, 840, Compatible with Case Construction and industrial models W5, W5A, W7, W8, W9, W10, 500, 680CK Replaces Case OEM number A11206, A11207, , Compatible with CockShutt / CO OP tractor models E3, E4, 20, 30, 40, 50, 540, 550 Replaces CockShutt / CO OP OEM number T07088, 12084G, , Compatible with International tractor models A, B, C, F12, F14, F20, F30, H, HV, Hydro 70, I4, I6, I9, OS4, OS6, Super C, Super M, Super MTA, Super W4, Super W6, Super W9, TD6 (s/n 29964-earlier), W12, W30, W40, 10-20, 15-30 (s/n 45513-later), 22-36, 100, 130, 140, 200, 230, 300, 340, 350, 400, 450, 460, 504, 560, 606, 656, 660, 666, 766, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Construction and industrial models 500 Replaces International OEM number 17564D, , Compatible with John Deere tractor models A (Styled and Unstyled), AI, AI (Styled and Unstyled), ANH (Styled and Unstyled), AO (Styled and Unstyled), AR, AR (Styled and Unstyled), AW, AW (Styled and Unstyled), B, B (Styled and Unstyled), BN (Styled and Unstyled), BNH (Styled and Unstyled), BO (Styled and Unstyled), BR (Styled and Unstyled), BWH (Styled and Unstyled), D (Styled and Unstyled), G, G (Styled and Unstyled), GH, GH (Styled and Unstyled), GM, GM (Styled and Unstyled), GN, GN (Styled and Unstyled), GW, GW (Styled and Unstyled), H, HNH, HWH, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2010, 4030, 4230, Compatible with John Deere Combine (s) 45, 55, 95, 105, 3300, 4400, 6600, 6602, 7700 Replaces John Deere OEM number AA517R, , Compatible with Massey Ferguson tractor models Super 90 (s/n 888673-earlier), 50 (s/n 536843-later), 65, 85 (s/n 807752-later), 135, 150, 165, 175, 180, Compatible with Massey Ferguson Construction and industrial models 20, 30, 50, 202, 204, 302 (s/n 119701046-later), 304 (s/n 119751024-later), 356, 2135, 3165 Replaces Massey Ferguson OEM number 505472M91, 1018079M91, , Compatible with Massey Harris tractor models Colt, Mustang, 20, 22, 30, 44, 55, 81, 82, 101, 102, 303, 333, 555 Replaces Massey Harris OEM number 12084G, , Compatible with Minneapolis Moline tractor models G, G707, G708, GB, GTA, GTB, GTC, R (s/n 404800-earlier), RTN (s/n 404800-earlier), RTU (s/n 404800-earlier), U (s/n 544001-later), U, UB, UB (Special), UDLX, UT (s/n 317400), UT, UTS (s/n 317400), UTS, Z (s/n 571686-earlier), ZAS (late, s/n 701911-later), ZB (late), ZBE (late), ZBN (late), ZBU (late), ZTU (s/n 611511-earlier), Compatible with Oliver tractor models Super 66, Super 99, 60, 66, 70, 80, 90, 99, 660, 950, Compatible with Oliver Construction and industrial models HG, OC3, Replaces Oliver OEM number BS5305A, CS5305A, Replaces White OEM number 1BS-5305A, O.D. 2-1/8", Length 2.970", (Item #: 126520) $10.60

Sediment Bowl Gasket - 2" - For Allis Chalmers tractor models B, C, CA, D10, D12, D14, D15 (gas, s/n 9001-earlier), D17 (gas, s/n 42000-earlier), D19 (gas, s/n 12000-earlier), G, IB, RC, WC, WD, WD45, WF, 170 (gas), 175 (gas), 180 (gas) Replaces Allis Chalmers OEM number 70208362, 208362, , (Item #: 105372) $1.30

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: Replaces: 208325, 208363, 70208325, 70208363 (Item #: 105364, Ref: 49923D) $3.50

Sediment Bowl Screen - For Allis Chalmers tractor models D15 (gas s/n 9001 and up), D17 (s/n 42001-earlier), D19 (s/n 12000-earlier), D21, WC, WD45 (diesel), WF, 170 (gas s/n 7500-earlier), 180 (diesel), 185 (diesel), 190 (gas) Replaces Allis Chalmers OEM number 70208325, 208325, , Compatible with Gleaner Combine (s) F2, K2, L2 (Engine: D2900 or D3500), Compatible with International tractor models A, B, C, H, M, Super A, Super C, Super H, Super M, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 460, 560, 656, 660, 706, 756, 766, 806, 826, 856, 2706, 2756, 2806, 2826, 2856 Replaces International OEM number 13194D, , Compatible with John Deere tractor models A, B, 60, 70, 80, 620, 630, 720, 730, 820, 830 Replaces John Deere OEM number AA519R, , Compatible with Massey Ferguson tractor models 30, 50, 135, 150, 165, 175, 180 (diesel), 2135, Compatible with Massey Ferguson Construction and industrial models 20, 202, 204, 302, 304, 356, Replaces Massey Ferguson OEM number 1037982M1, 2-1/8" OD, 7/16" Center Hole, (Item #: 112253) $4.10

Sediment Bowl, Large - For tractor models WD45D, D15D, D17, D19, D21, 170, 180. All with diesel engines. (Item #: 105393, Ref: 581355) $22.00

Throttle Lever Knob - For tractor models CA, D10, D12, D14, D15, D17, WC, WD, WD45, WF, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. (Item #: 112466, Ref: 220901) $7.20

Gauges

Ammeter - Ammeter for tractor models 170, 190, D10, D12, D14, D15, D17, D19, D21. (Item #: 110403, Ref: 70254407) $20.90

Amp Gauge - This amp gauge has the "Allis-Chalmers" logo printed on the face. It fits the following tractor models B, C, CA, D10, D12, D14, D15, D17, D19, D21, 160, 170, 175, 180, 190, 190XT, 200, 210, 220. It is meant to be used on systems that have been converted to 12 volts. It has a white face, chrome bezel, and it reads 60-0-60. Replaces 70254407, 254407 (Item #: 187035, Ref: ACS1833) $32.14

No
Picture
Amp Meter Gauge - For Allis Chalmers tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180 (s/n 12799 - earlier), 185, 190, 190XT, 200, 210, 220, Replaces Allis Chalmers OEM number 70254407, 70240987, 60-0-60, Voltage: 12, Diameter: 2", (Item #: 173678) $14.80

Dash Light with 12V Bulb - Used on the following Allis Chamlers models: D10, D12, D14, D15, D17, D19, D21, I40, I400, I60, I600, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, this Dash Light replaces OEM part numbers 229203, 230247, 234404, 70229203, 70230247, 70234404. This part has a 0.658 inch socket diameter, 1 inch center to center on mounting holes and a Chrome finish. (Item #: 105311, Ref: 70234404) $29.50

Dash Warning Light - Know when you oil pressure is low with this Dash Warning Light. This is a 12 - volt light with red dome. It is 2.191 inches over all length, with 0.675 inch outside diameter threads. 2 Spade Terminals. Used on Allis Chalmers D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces part numbers 240837, 240838, 240869, 276390, 70240837, 70240838, 70240869, 70276390 (Item #: 182846, Ref: 240837) $27.00

Fuel Gauge - For Allis Chalmers tractor models D21, 170, 175, 180, 185, 190, 190XT, Replaces Allis Chalmers OEM number 70240988, (Item #: 162432) $54.00

Proofmeter Drive Assembly - With Cover, 2 gears, 2 gaskets. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, D21 Has 12 and 45 teeth. Replaces original part numbers 246764, 70246764. (Item #: 128421, Ref: 720046764) $41.70

Sending Unit Gasket - The dimensions of this rubberized cork gasket are:1.715 inch inner diameter, 2.850 inch outside diameter, 0.191 inch thick, and there are five (5) � inch screw holes. Replaces 1015335M1, 101611A, 10A29269, 10A7362, 10A9818, 158046A, 189605M1, 189605M2, 189605M3, 239789, 241522, 29-12, 30-3048772, 369154R1, 70140C1, 70239789, 70241522, A11822, A61161, F2418R, R27181 (Item #: 165414, Ref: 189605M1) $2.90

Tachometer Cable - Measuring 64.5 inches long with square ends. One end measures 5/8 with 18 threads, and one end measures 7/8 with 18 threads. For the following models: D21, 170, 175, 190, 190XT, 210, and 220. Used with 70252409 tachometer. Replaces 251791, 251792, and 256526, 70256526. (Item #: 167223, Ref: 70256526) $43.50

Tachometer Drive Gear and Shaft - For Allis Chalmers tractor models D21, 170, 175, 180, 185, 190, 200, 210, 220, Replaces Allis Chalmers OEM number 70250487, 250487, (Item #: 154691) $17.50

Tachometer Gear and Shaft - For Allis Chalmers tractor models D21, 170, 175, 180, 185, 190, 200, 210, 220, Replaces Allis Chalmers OEM number 250488, 70250488, (Item #: 154690) $22.20

Temperature Sensor - Water - For Allis Chalmers tractor models D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, Replaces Allis Chalmers OEM number 70241249, (Item #: 162434) $11.30

Hitch / Drawbar

Drawbar, Standard - 2.50 inches wide, 1.250 inches thick, 50.50 inches long. For tractor models 170, 175, 180, 185, (D17 series IV). (Item #: 110437, Ref: 70254452) $179.00

Lift Link Clevis - Part is 7 3/4 inch overall length, 3/4 inch pin holes, 1 inch space in stirrup, and 1 1/8 inch threaded female end. For tractor models D17, 170, 175, 180, 185, 190, 190XT. (Item #: 108892, Ref: 70257726) $93.00

Lift Link Screw - Measurements for this Lift Link Screw are 13.625 inches length, 1.200 inches Diameter, and 1.125-7 Thread. For tractor models D17, 170, 180, (185 serial number up to 5707). THIS IS NOT FINE THREAD LIKE THE PICTURE SUGGESTS. (Item #: 174279, Ref: 70254112) $82.00

Sway Block - Left - For 170, 175, 180, 185. Sway Block - Left Hand, Cat II. (Item #: 121769, Ref: 70242319) $64.00

Sway Block - Right - For 170, 175, 180, 185. Sway Block - Right Hand, Cat II. (Item #: 121770, Ref: 70242320) $58.00

Hydraulic System

Hydraulic Pump Repair Kit - Repairs triple pumps 70249828, 70256067, 7029437. For tractor models 170, 175, 180, 185. (Item #: 172881, Ref: 24D002) $246.00

Hydraulic Pump Seal Kit - For Allis Chalmers tractor models D17, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6080, 7000, 7580, 8550, Replaces Allis Chalmers OEM number 70255947, For single stage pumps, (Item #: 167583) $167.00

Pump Control Knob - Plastic Knob, 3/8 inch fine thread. For tractor models 170, 175, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070. (Item #: 126604, Ref: R4572) $5.50

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces 239804, 1164605, 70239804, 71164605 (Item #: 111242, Ref: 28A116) $12.90

Dash Light, Chrome, 12 Volt - For tractor models 170, D10, D12, D14, D15, D17, D19, D21, 175, 180, 185, 190, 190XT, 200, 210, 220, I-40, I-400, I-60, I-600. Replaces 230247, 234404, 70230247, 70234404. (Item #: 105311, Ref: 229203) $29.50

Headlight Washer - Used with light part number 164089AS. For the following tractors: (170, 175, 180, 185, 190, 190XT all with flat top fenders), 200, 7000, 7030, 7040, 7050, 7060, 7080. (Item #: 154899, Ref: 504781M1) $5.30

Headlight, Less Glare Guard - Fender mounted, wires come through rear stud. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6040, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080. (Item #: 105301, Ref: 70267185) $29.00

Headlight, with Glare Guard - Fender mounted, wires come through rear stud. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 6040, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080. (Item #: 160751, Ref: 70249146) $113.00

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Used on Allis Chalmers Combines: A, C, E, EIII, F, K, L, L2, M, M2. Tractors : D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 5040, 5050, 6040, 6060, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8550. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $35.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 230232, 70232232, 70276858, 70230232. (Item #: 111241, Ref: 373662R91) $9.10

Light ring - The dimensions of this light ring with screw are 4.5 inches in height and 0.885 inches in width. For the following tractors D14 with serial number 19001 and up, D15, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7030, 7050. Replaces 10P1552, 230233, 371445R91, 371449R91, 371451R91, 70230233, AF3891R, B50255, B50258, JDS676. Verify measurements before ordering. Most models used more than one headlight style in production. (Item #: 154743, Ref: 371449R91) $25.70

Rubber Light Bezel - Rubber light bezel for �Hobbs� style light (without glare guard) has 3 outer tabs to attach rubber ring to the light housing, and there are 4 inner tabs to secure to the sealed beam. The bezel has an outer diameter of 5.250 in., inner diameter of 3.625 in. and measures 1.125 in. in width. The bezel slides over the outside of the light housing. You can use this bezel for front, rear or both (light bezels). Verify if you have Hobbs or Guide style before ordering. Replaces Hobbs part 4023. Also replaces 1019386M1, 10P1702, 164494A, 22-364, 269431, 676078R1, 70269431, A25213, B52085, D31441, R16888, R30182 (Item #: 163971, Ref: A25213) $13.70

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $18.50

Sealed Beam Bulb - Red backed, work/tail light, 4-1/2 inch diameter. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 6040, 7030, 7050, D10, D12, D15, D17, D19, D21. (Item #: 116014, Ref: 70250301) $23.50

$Allis Chalmers 170 Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Item #: 150699, Ref: TLBULB12V) $1.70

Oil System

Oil Fill Cap with Gasket - For Allis Chalmers tractor models WD45, 170, 175, Replaces Allis Chalmers OEM number 223676, 226240, 26374, 70226376, (Item #: 126589) $21.60

Oil Filter, Spin On - Spin on style oil filter measures with dimensions of 5 13/32 inches in length, 3 11/16 inches O.D. Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Item #: 118399, Ref: E7NN6714AA) $14.50

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Uses EBU6734A washer, sold separately. Replaces 205060, 224994, 225585, 225657, 226408, 4026437, 74026437. (Item #: 126591, Ref: C5NE6730B) $8.10

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.70

PTO / Driveline

No
Picture
PTO Coupling-Shaft, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM nos 70229310, 70227579, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437456) $104.01

No
Picture
PTO Drive Gear, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70231944, Teeth: 55, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453932) $125.01

No
Picture
PTO Drive Shaft, Used - For Allis Chalmers tractor models D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70231943, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453933) $161.01

No
Picture
PTO Gear Cover, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 175, Replaces Allis Chalmers OEM nos 70229299, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453972) $35.01

PTO Shaft - Rear 540 RPM PTO shaft. Length is 41.375 inches. 6 spline on both ends. 1 3/8 inch Diameter Replaces 70229312. For tractor models D-17, 170, 185, 180, 185. (Item #: 172874, Ref: 70231938) $341.00

PTO Shaft - 540/1000 RPM. NOTE: Center mounting ring is 5.750 inches in diameter, with 4 bolt holes inner and outer. For tractor models 170, 175, 180, 185 serial number to 12525, 190, 190XT, 200. Replaces 255802. (Item #: 108800, Ref: 70255802) $239.00

$Allis Chalmers 170 PTO Shaft - 540\1000 RPM, Used$
PTO Shaft - 540/1000 RPM, Used - For Allis Chalmers tractor models 170, 175, 180, 185 (to SN12800), 190, 190XT, 200, Replaces Allis Chalmers OEM number 70255802, Center mounting ring is 5.750" dia., with 4 bolt holes inner and outer, 7.875" Long, For a new version of this item use Item #: 108800, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408800) $110.01

PTO and Lift Shaft Housing Seal - PTO Outer Seal for 1 speed, 1 3/8 inch output shaft. This oil seal measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide For tractor models B, C, CA, D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 190XT III, 200. Replaces: 224810, 230608, 241779, 70224810, 70230608, 70241779 (Item #: 128541, Ref: 70241779) $7.30

Paint

No
Picture
Paint, Cream, 1 Gallon - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108324, Ref: TP270GAL) $66.00

No
Picture
Paint, Cream, 1 Quart - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108323, Ref: TP270QT) $32.80

No
Picture
Paint, Cream, Spray Can - This Allis Chalmers Cream paint is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used from 1961 through 1967 for the wheels and roofs on models D10, D12, D15, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040, 5040, 7000, 7030, 7040, 7050, 7060, 7080, and 7580. Some of these models used TP312 Aluminum on the wheels at times. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108322, Ref: TP270SP) $10.20

No
Picture
Paint, Persian Orange #2, 1 Gallon - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108317, Ref: TP285GAL) $54.00

No
Picture
Paint, Persian Orange #2, 1 Quart - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108316, Ref: TP285QT) $23.40

No
Picture
Paint, Persian Orange #2, Spray Can - This Allis Chalmers Persian Orange #2 was used from 1961 through 1967 on sheet metal for models D10, D12, D15, D17, D19, D21, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 440, 6040*, 5040*, 7000*, 7030*, 7040*, 7050*, 7060*, 7080*, 7580*. (* These models had a Maroon chassis) High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108315, Ref: TP285SP) $8.30

Seats

Back Cushion, Wood Backing - This High Quality Back Cushion is on a wood backing. It is not exactly like the original. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces: 236460, 70236460 (Item #: 70236460W) $52.91

Back Rest Cushion on Steel - This Back Rest Cushion is restoration quality with powder coated steel backing. Cushions are embossed like original. High quality stitching. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces: 236460, 70236460 (Item #: 101195, Ref: 70236460-OE) $76.00

Seat Back - Black and White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178464, Ref: R4357) $246.00

Seat Back - Black and White Vinyl on Wood For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Item #: 178469, Ref: R0853) $95.00

Seat Back - Black Vinyl on Steel For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080. Replaces 70255581, 70255581-1 (Item #: 101203, Ref: 70255581) $216.00

Seat Back-MADE IN USA - Black and White Vinyl on Steel For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178461, Ref: R0851) $325.00

Seat Bottom - Black and White Vinyl on Steel For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178463, Ref: R0850) $331.00

Seat Bottom - Black and White Vinyl on Steel with Original Style Pleated Covering For D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220 (Item #: 178465, Ref: R4356) $362.00

Seat Bottom - Black and White Vinyl on Wood. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. (Item #: 178471, Ref: R0852) $144.00

Seat Bottom - Black Vinyl on Steel For 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030. Replaces 70256350, 70256350-1 (Item #: 101202, Ref: 70256350) $159.00

Seat Bottom Cushion - This Seat Bottom Cushion Restoration quality with powder coated steel backing. Cushions are embossed like original. High quality stitching. Used on D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). Replaces 236461, 70236461 (Item #: 178946, Ref: 70236461-OE) $285.01

Seat Bottom Cushion, Wood Base - This is a high quality replacement for Allis Chalmers D10, D12, D14, D15, D17, D19, D21, (170, 175, 180, 185, 190, 190XT, 210, 220 using 2 piece seat without arm rests). It has a wood base. Not exactly like the original. Replaces 236461, 70236461 (Item #: 179372, Ref: 70236461W) $103.00

Seat Cushion Set - This Black and white vinyl two piece cushion set is steel backed. Consists of R4356, R4357 plus the Seat Frame. Original style pleated covering. For tractor models D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 220. Replaces: 236318 (Item #: 178950, Ref: R4358) $557.00

Seat Frame - Used with two cushions on Allis Chalmers models: 170, 175, 180, 185, 190, 190XT, 200, 220, 7030, 7050, D10, D12, D14, D15, D17, D19 (Item #: 70243740PAN) $172.91

Seat Shock Absorber - Compatible with Allis Chalmers Tractors: D10, D12, D14, D15, D17, D19, D21, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580. Replaces Allis Chalmers OEM nos 70227917, 227916, 227917, 70227916. Includes Shock, Spring, Retainers, Collar and Bushings. 11-3/4 iches center to center when extended, 8-1/8 inches center to center when compressed. (Item #: 105315) $114.30

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Sheet Metal / Body Parts

Toolbox - Measures 21-3/8 Inches long, 6-3/16 Inches high, 4 Inches wide. For tractor models D15, D17, D19, 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220. Replaces: 236661, 242323, 249750, 70249750 (Item #: 103876, Ref: 70249750) $65.00

Steering

No
Picture
Front Axle Bushing - For tractor models 160, 170, 185, 9130, 9150, 9170, 9190. (Item #: 172694, Ref: 72160032) $32.30

Pivot Pin Assembly - Includes: 70916896 (7/8 inch NF slotted nut) and 70925721 (5/32 inch X 2 inch cotter pin). For tractor models (170, 175 gas with roll shift front axle), (180, 185, 190, 190XT, 200, D19 all with roll shift front axle), (D17 serial number 38136 and up with roll shift front axle). (Item #: 104301, Ref: 70235154) $65.00

Seal - Seal with wear sleeve for tractors with dual front wheels, except HD axle, serial number 42001 and up. For tractor models 160, 170, 175, 180, 190, 190XT, 200, 6060, 6070, 6080, 7000, D10, D12, D15, D17. (Item #: 164159, Ref: 70235120) $15.30

Seal Kit - For Allis Chalmers tractor models D21, 170, 175, 180 (s/n 12800-earlier), 185 (s/n 12800-earlier), 190, 190XT, 200, 440, 7020, 7030, 7040, 7045, 7050, 7060, 7080 Replaces Allis Chalmers OEM number 70239229, 70239192, , Compatible with Gleaner Combine (s) E3 (s/n 25001-later), F (s/n 12201-earlier), G (s/n 17001-earlier), K (s/n 24200-earlier), (Item #: 168995) $12.10

Sliding Rod - 14.750 inches long, 1.125 inch outside diameter. For tractor models 170, 175 with roll shift front axle. (Item #: 104286, Ref: 70256148) $94.00

Spindle Bushing - Used on spindle 70237434, on tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 110538, Ref: 70211743) $13.00

Spindle Thrust Washer - For tractor models (170 late), 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060, 6070 with standard tread, 96 inch tread), 6080, 615, (7000 early), D10, D12, D14, D15, (D17 early with 5 bolt wheel), D19, 160, 1600. (Item #: 111696, Ref: 70218762) $6.40

$Allis Chalmers 170 Spindle, LH\RH$
Spindle, LH/RH - This spindle measures A=12 inches, B=1.610 inches, C=1.625 inches, D=1.187 inches. For tractor models 170 Late, 175, 180, 185, D15, D17. Uses wheel bearing kit part number SBKAC2. (Item #: 100091, Ref: 70270038) $166.00

No
Picture
Steering Arm - Left Hand For D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200 (Item #: 100105, Ref: R2824) $117.00

Steering Arm - Left Hand, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM number 70245867, 1.610 inches inside diameter, Left Hand, For a new version of this item use Item #: 100105, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497088) $75.01

Steering Arm - Right Hand, Used - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 200, Replaces Allis Chalmers OEM number 70245868, (1.610 inches inside diameter), Right Hand, For a new version of this item use Item #: 100106, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497155) $83.01

Steering Arm, LH - Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Item #: 100105, Ref: 70245867) $117.00

Steering Arm, LH - 6.750 inch hole center to hole center. For tractor models (170 serial number 7500 and up with roll shift front axle), (175 serial number 2035 and up with roll shift front axle), 6060, 6070. (Item #: 104295, Ref: 70256031) $148.00

Steering Arm, RH - Fits 1.610 inch diameter hole, keyed spindle, ball joint hole taper is .625 inch to .725 inch. For tractor models 170, 175, 180, 185, 190, 190XT, 200, D14, D15, D17, D19. (Item #: 100106, Ref: 70245868) $141.00

Steering Arm, RH - 6.750 inch hole center to hole center. For tractor models (170 serial number 7500 and up with roll shift front axle), (175 serial number 2035 and up with roll shift front axle), 6060, 6070. (Item #: 104296, Ref: 70256034) $149.00

No
Picture
Steering Motor, Hydraulic - For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, D21. (Item #: 124645, Ref: 70271316) $708.61

No
Picture
Steering Wheel - 15-3/4 inches in diameter, 36 spline, 7 inches deep. For tractor models 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 7000, 7030, 7040, 7050, 7060, 7080, 7580. Replaces 256852, 1142487. (Item #: 113315, Ref: 242933) $65.00

No
Picture
Steering Wheel - 16 inch diameter, 7 inch dish. Fits 36 Splined 7/8 inch shaft for tractor models: 170, 173, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050. Uses cap part number 70246722. (Item #: 113315, Ref: 70256852) $65.00

Steering Wheel Cap - Use with 242933 steering wheel. For tractor models 170, 180, 185, (190 from serial number 2485), 190XT, 200, 210, 220, 440, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7045, 7060, 7080, 7580. (Item #: 71362581) $31.13

No
Picture
Steering Wheel Cap - Clear cap with the AC Allis Chamers logo. Fits steering wheel part number 70256852. For tractor models 170, 173, 180, 185, 190, 190XT, 200, 210, 220, 6060, 6070, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050. (Item #: 104210, Ref: 70246722) $21.44

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

Tie Rod - Tie rod end, threaded, .813 inch diameter with 12 Right Hand threads per inch, and 3-3/4 inches to center of post. For tractor models 170, 175, 6060, 6070. (Item #: 100323, Ref: 70256151) $23.00

Tie Rod - 15.720 inches long from zerk to end, 1.125 inch diameter. For tractor models 170, 175 with roll shift front axle. (Item #: 104283, Ref: 70256144) $110.00

Tie Rod Assembly - Consists of OEM part numbers 70250140 and 70250141. Replaces: 249418, 225280, 225279, 254662, 254661. For (D14, D15, D17, D19, WD, WD45 Fits these models if cut to length), (170, 175, 180, 185, 190XT, 200 fits these models with standard front end). (Item #: 100082, Ref: 70254660) $52.00

Tie Rod Assembly, Complete - Kit includes tie rod, wedge, sliding rod, tube assembly, inner tie rod and hardware. For tractor models 170, 175 both with roll shift front axle. (Item #: 104282, Ref: 70256019) $462.00

Tie Rod Clamp - For Allis Chalmers tractor models D14, D15, D17, D19, 170, 180, 185, Compatible with Massey Ferguson tractor models 50 (s/n 528163-533422), 65 (Gas s/n 671680-692932 or Diesel s/n 667918-692932), 150, Compatible with Massey Ferguson Combine (s) 32, Compatible with Massey Ferguson Construction and industrial models 304, Replaces OEM number CLP12, (Item #: 104281) $4.20

Tie Rod End, Female - 17.500 inches long. For tractor models 180, 185, 190, 190XT, 200. Will also fit 170, D14, D15, D17, D19 if cut to proper length. Can also replace 250142 used on WD, WD45 if cut to length. (Item #: 100083, Ref: 70254661) $23.60

Tie Rod Nut - For Allis Chalmers tractor models 170, 175, Replaces Allis Chalmers OEM number 70256145, (Item #: 104284) $5.80

Tie Rod Tube Assembly - 36.00 inches long, 1.140 inch inside diameter. For tractor models 170, 175 with roll shift front axle. (Item #: 104287, Ref: 70256149) $352.00

Tie Rod Wedge - For Allis Chalmers tractor models 170, 175, Replaces Allis Chalmers OEM number 70256146, (Item #: 104285) $1.80

Wheels

Bar Clamp - Wheel clamp, disc to rim. For power shift rear wheels. Serial number 42001 and up. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 210, 220, 5040, 5045, 5050, 6060, 6070, 6080, 6140, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550, D15, D17. Replaces 70235676 (Item #: 124526, Ref: 898021M1) $18.20

Bearing Cone - Inner cone for front wheel bearings. For tractor models 170, 180, 190, D17, D19. (Item #: 112217, Ref: 70209899) $7.01

Bearing Cup - Inner cup for front wheel bearings. For 170, 180, 190, D17, D19 (Item #: 111704, Ref: 70235089) $13.90

Bearing Cup - Outer cup for front wheel bearings. For 170, 180, 190, D14, D15, D17, D19, WC, WD, WD45 (Item #: 180095, Ref: 70209983) $6.20

Eccentric Pin Block, Used - For Allis Chalmers tractor models CA, D10, D12, D14, D15, D17, WD, WD45, 160, 170, 175, 180, 185, 190, 190XT, 6040, 6060, 6070, 6080, 6140, Replaces Allis Chalmers OEM nos 70220032, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430928) $13.26

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 235727, 237405, 70235727, 70237405 (Item #: 103768, Ref: FW60166) $92.00

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $104.00

Front Rim-Heavy Duty - Front Rim with weight holes. 4.5 inch x 16 inch, 2500 lb. capacity. 6 bolt, 6 inch circle, 4.62 inch pilot for 5.50 inch x 6.00 inch x 16 inch tires. Also replaces OEM # 70235086, 70248460. Fits Models: (D15 with serial number below 9001), (D17 with serial number below 75001), D19, ED40, 160, 170, 175, 180, 185, 190, 190XT, 6060, 6070. Additional $15 shipping due to weight. (Item #: 103756, Ref: 8N1015D) $70.00

Front Wheel Bearing Kit - This is a complete Front Wheel Bearing Kit for 1 wheel, with a 6 bolt hub. Verify individual part numbers to ensure you are ordering the correct kit. For tractor models 160, 170, 175, 180, 185, 190, 190XT, 200, 500, 600, 6060, 6070, 6080, 615, 7000, (D15 serial number 9001 and up with 6 bolt hub), (D17 serial number 42001 with 6 bolt hub), D19, I60, I600. Kit contains one of the following 15250B, 15118, 26823, 26882, 70235120. (Item #: 100099, Ref: WBKAC2) $45.50

Front Wheel Lug Bolt - Used in many applications, this wheel stud has 1/2 inch - 20 NF thread, 1 inch thread length and 13/16 inch hex head. Used on Allis Chalmers 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, B, C, CA, D10, D12, D14, D15, D17, D19, G as rear rim lug bolt, WC, WD, WD45, WF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863. (Item #: 111560, Ref: 512581M1) $1.60

Power Adjust Rim Clamp - For Allis Chalmers tractor models D15, D17 (s/n 42001 - later), 160, 170 (with 28" rims), 175 (with 28" rims), 180 (with 28" and 30" Rims), 185 (with 28" and 30" Rims), 190, 190XT, 200, 220, 5040, 5045, 5050, 6060 (with 28" and 34" Rims), 6070 (with 28" and 34" Rims), 6080 (with 28" and 34" Rims), 6140 (with 28" rims), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, Replaces Allis Chalmers OEM number 70235676, (Item #: 118628) $15.70

Power Adjust Rim Clamp, Used - For Allis Chalmers tractor models D15, D17 (s/n 42001 - later), 160, 170 (with 28" rims), 175 (with 28" rims), 180 (with 28" and 30" Rims), 185 (with 28" and 30" Rims), 190, 190XT, 200, 220, 5040, 5045, 5050, 6060 (with 28" and 34" Rims), 6070 (with 28" and 34" Rims), 6080 (with 28" and 34" Rims), 6140 (with 28" rims), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, Replaces Allis Chalmers OEM number 70235676, For a new version of this item use Item #: 118628, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 418628) $10.01

Rim Clamp, Used - For Allis Chalmers tractor models D21, 4W-220, 4W-305, 170, 175, 190, 200, 210, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550, 8785 Replaces Allis Chalmers OEM nos 70235525, , Compatible with Massey Ferguson tractor models 1100, 1105, 1130, 1135, 1150, 1155, 1505 (1805), 1805, 2675, 2705, 2745, 2775, 2805, 3090, 3525, 3545, 3630, 3645, 3650, 3655, 3660, 3670, 3680, 3690, 4800, 4840, 4880, 4900, 6190, 8120, 8140, 8150, 8160, Replaces Massey Ferguson OEM nos 507773M1, Replaces Casting nos 507773, For Non Power Adjust Rims, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497035) $15.01

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims 535453M91, 535452M91, PAR10X28, C5NN1050J and C5NN1050H. Replaces: 218662, 225190, 70218662, 70225190, 70273627. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.60

Wheel Bolt - This wheel bolt fits the following tractor models: D10, D12, D14, D15, D17, I40, I400, I60, WD, WD45, 170, 175, 180, 185, and I600. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part numbers: 225191, 251815, 70225191, and 70251815. (Item #: 108605, Ref: WB916) $2.20

Wheel Hub - For use with threaded hub cap, 4.620 inch diameter pilot hole, 6.00 inch wheel bolt circle, replaces OEM number 236706. For tractor models 170, 175, 180, 185, 190, 190XT, 200, (500, 600 forklift), (6060 with 96 inch tread), 6070, 6080, 615, (7000 early), D15, D17, D19, 160, 1600. (Item #: 100102, Ref: 70261418) $57.00

Wheel Hub Cap - This is a threaded type front wheel hub cap for tractor models 170, 175, 180, 185, 190, 190XT, 200, 6070, 6080, (7000 early), D15, D17, D19. (Item #: 104560, Ref: 70220403) $16.10

No
Picture
Wheel Hub, Used - For Allis Chalmers tractor models D15 (s/n 9001-later), D17 (s/n 42001-later), D19, 160, 170, 175, 180, 185, 190, 190XT, 210, 220, 6060, 6070, 6080, 7000, Compatible with Allis Chalmers Construction and industrial models I60, I600, 615, Replaces Allis Chalmers OEM nos 70236706, 70261418, 70242599, Replaces Casting nos 261416, 33106-R, Pilot diameter: 4.620", Wheel bolt circle: 6", Wheel bolt holes: 6, Use with pressed in hub cap, Stud bolts not included, For a used version that uses threaded on cap see Item # 400102, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., " (Item #: 496579) $55.01

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

AC Diamond Decal - Black and White, Milwaukee, 6 inches x 6 inches. Vinyl Cut. (Item #: 183055, Ref: R4634) $14.20

AC Diamond Decal - Orange Background, 5 1/2 inches x 5 1/2 inches. (Item #: 183122, Ref: R4633) $12.00

AC Diamond Decal - Black and White, 4 inches x 4 inches, Vinyl Cut. (Item #: 183053, Ref: R4632) $9.90

AC Diamond Decal - 1 inches x 1 inches orange, blue and gold printed on vinyl. (Item #: 183049, Ref: R5234) $2.60

AC Logo Decal - 1-1/2 inches x 8 inches, Black and Orange on White. (Item #: 100153, Ref: R0675) $3.50

AC Logo Decal - 3 inches x 18 inches, Black and Orange on White. (Item #: 100154, Ref: R0676) $8.80

AC Logo Decal - 24 inches long, Black and Orange. (Item #: 183479, Ref: R0677) $27.50

AC Logo Decal, New Style - 3-1/2 inches x 3-1/2 inches Black and Orange on White. (Item #: 100163, Ref: R5168) $3.50

AC Logo Decal, New Style - 4-1/2 inches x 4-1/2 inches Black and Orange on White. (Item #: 100152, Ref: R5169) $5.30

AC Logo Decal, New Style - 8 inches x 8 inches Black and Orange on White, printed on vinyl. (Item #: 183047, Ref: R5233) $23.60

No
Picture
Power Shift Decals - One pair, white. For the cab on some Allis models. (Item #: 183474, Ref: R0674) $27.50

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1952 and newer). Just call us at 800-853-2651.

NOTE

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style.. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket For Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - This thermal battery wrap is used to keep your battery warm. It is 60 Watts and measures 28 inches long. (Item #: BTW28) $22.50

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models (Item #: 105281, Ref: D4PE12029AA) $16.30

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $19.20

NOTE

STARTER - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Spark Plug - Fits all models 1953 thru 1975 using 1/2" reach, 7/8" heck size. (Item #: 113918, Ref: AL3116) $5.00

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

$Allis Chalmers 170 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Allis Chalmers 170 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Allis Chalmers 170 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Allis Chalmers 170 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Allis Chalmers 170 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Allis Chalmers 170 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Allis Chalmers 170 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.75 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Item #: 114940, Ref: R7949) $9.92

$Allis Chalmers 170 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16) inch, four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H. Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Orange - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161192) $123.00

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Allis Orange, 1 Quart - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100109, Ref: TP280QT) $24.00

No
Picture
Paint, Allis Orange, Spray Can - This Allis Chalmers Corporate Orange was used from 1970 through 1985 on the sheet metal for models 5010, 5020, 5030, 5040, 5045, 5050, 6140, 6060, 6070, 200, 210, 220, 6080, 7000, 7010, 7020, 7045, 7060, 7080, 7580, 8550, 8010, 8030, 8050, 8070, 4W220, 4W305 High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100108, Ref: TP280SP) $8.50

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat, Air Suspension, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Universal - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Tie-On Seat Cover - Orange and White, 21 inches wide. Fits 19 or 21 inch wide pan seats. Deluxe with 2 inches of foam. (Item #: 179007, Ref: R1012) $63.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt (Item #: 164438, Ref: ABC1417) $47.60

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Item #: 182520, Ref: S.04352) $3.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for radial tires. (Item #: 183819, Ref: WHS064) $82.00

Tire, Three Rib - Front tire, 3 Rib, 5.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00