Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers W Parts

Category: Fuel System / Air Intake

[Categories]   [All W Parts]   [All Allis Chalmers Models]  


Allis Chalmers W Carburetor
Carburetor
- Aftermarket replacement for 12522 outperforms the original Marvel carburetors: TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832, 9706. Linkage is reversible. This carburetor comes with studs which attach to the carburetor and will not work with those applications that the studs need to attach to the manifold. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. 1 year warranty. For models using the above listed carburetor numbers on models B, B-15, C, D10, D12, CA, IB, R, W, WC, WD. (Item #: 185128, Ref: 12522B) $332.00

Allis Chalmers W Carburetor
Carburetor
- With reversible linkage. This Zenith carburetor outperforms the original carbs used on: B, B-15, C, D10, D12, CA 1952-56, IB, R, W, WC, WD Crawler. Replaces TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832, 9706. This carburetor comes with studs that attach to carburetor. THIS WILL NOT WORK IN THOSE APPLICATIONS THAT STUDS MUST BE USED IN THE MANIFOLD. 2 5/16 InchES CENTER TO CENTER ON MOUNTING BOLTS. Made in USA, 1 year warranty. (Item #: 100747, Ref: 12522) $460.00

Allis Chalmers W Carburetor Fuel Needle
Carburetor Fuel Needle
- Main Jet Adjusting Needle Assembly for Zenith carburetor series 61 and 62, model numbers: 9707, 10981, 12401, 12749, 13876, 225621. For D10, D12, W, WC, WD, WF. (Item #: 108462, Ref: 71-28) $13.30

Allis Chalmers W Carburetor Kit, Basic
Carburetor Kit, Basic
- FOR MARVEL SCHEBLER CARBS TSX159, TSX422 OR ALLIS CHALMERS CARBS 222088, 224750 For W, WC, WD, WF (Item #: 112446, Ref: BK27V) $30.60

Allis Chalmers W Carburetor Kit, Basic
Carburetor Kit, Basic
- Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For tractor models B, B15, C, D10, D12, CA, IB, R, W, WC, WD. (Item #: 186565, Ref: K2119) $47.50

Allis Chalmers W Carburetor Kit, Complete
Carburetor Kit, Complete
- For W, WC, WD, WF with Marvel-Schebler TSX159, TSX422, or Allis Chalmers carburetors 222088, 224750, 70222088, 70224750. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. (Item #: 113809, Ref: C527V) $37.40

No
Picture
Carburetor, Rebuilt
- This rebuilt Zenith carburetor is a replacement for 12522. Replaces Marvel numbers TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. Linkage is reversible. The Mounting Bolts spacing measures 2 5/16 inches center-to-center. For models using the above listed carburetor numbers on models B, B-15, C, D10, D12, CA, IB, R, W, WC, WD. A $50.00 core charge will be added to the price and is refundable when you send your core to us and it is verified to be a rebuildable core. You will receive instructions for returning your core for a refund if you have one available. (Item #: 203219, Ref: 12522R) $465.01



Allis Chalmers W Carburetor Elbow and Strainer
Carburetor Elbow and Strainer
- Fits some Allis Chalmers models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Allis Chalmers W Choke Cable
Choke Cable
- Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Item #: 178125, Ref: CC72) $19.00

No
Picture
Choke Cable Swivel
- Choke cable swivel attaches the choke inner cable to the choke lever. Used on tractors with a choke cable. (Item #: 184016, Ref: CT28-49) $15.76

Allis Chalmers W Engine Heater, Tank Type
Engine Heater, Tank Type
- 1500 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 30-40 quart capacity liquid cooled engines. (Item #: 107378, Ref: GE1500) $111.00

Allis Chalmers W Fuel Filter Kit, In-Line, 5\16 inch
Fuel Filter Kit, In-Line, 5/16 inch
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. Contains: Filter, 2 - hoses, 4 - clamps. (Item #: 119295, Ref: BF840) $6.30

Allis Chalmers W Fuel Filter, In-Line, 1\4 inch
Fuel Filter, In-Line, 1/4 inch
- Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Item #: 119294, Ref: 6511393) $7.60

Allis Chalmers W Fuel Filter, In-Line, 3\8 inch
Fuel Filter, In-Line, 3/8 inch
- Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Item #: 120082, Ref: BF836) $6.70

Allis Chalmers W Fuel Filter, In-Line, 5\16 inch, Clear
Fuel Filter, In-Line, 5/16 inch, Clear
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Item #: 110863, Ref: BF7736) $4.80

Allis Chalmers W Fuel Tank Liner
Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Item #: 107976, Ref: R2043) $72.00

Allis Chalmers W Fuel Tank Liner Kit
Fuel Tank Liner Kit
- Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Item #: 112528, Ref: NR1259) $114.00

Allis Chalmers W Fuel Tank Screen
Fuel Tank Screen
- This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter (7/32)- 2.53 inch Overall Length. Outside diameter of screen is 0.375 of an inch. If the Insert (7/32) is too large, you can use a 7/32 drill bit to enlarge the hole in the fuel filter assembly. If the insert is to small, use foil to shim. (Item #: 114940, Ref: R7949) $9.92

Allis Chalmers W Fuel Tank Webbing, 3 Ft
Fuel Tank Webbing, 3 Ft
- Black woven nylon type material measures .042 inches thick, 15/16 inches wide and 3 foot section. (Item #: 178009, Ref: FTW494) $5.60

Allis Chalmers W Lucas Fuel Treatment (quart)
Lucas Fuel Treatment (quart)
- Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Item #: 180786, Ref: LU10003) $13.30

Allis Chalmers W Main Load Adjusting Needle Assembly
Main Load Adjusting Needle Assembly
- Used on Marvel Schebler carburetors TSX181, TSX221, TSX245, TSX332, TSX360, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX633, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX797, TSX97, this part replaces OEM numbers 10P70, 43-613, 43-622, 43-678, 43-699, RE9051. Verify your carburetor is among those listed before ordering. (Item #: 111767, Ref: CT43-622) $49.80

Allis Chalmers W Pre Cleaner Assembly with Pipe
Pre Cleaner Assembly with Pipe
- By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2 inch pipe inside diameter, 6 inch bowl and is 11-1/2 inches tall. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185438, Ref: S66397) $20.60

Allis Chalmers W Pre Cleaner Assembly with Pipe
Pre Cleaner Assembly with Pipe
- By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2.25 inch pipe inside diameter, 7 inch bowl and is 9-1/2 pipe. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185439, Ref: C0NN9A660A) $32.90

Allis Chalmers W Pre Cleaner Assembly, Turbo 2-3 Inch
Pre Cleaner Assembly, Turbo 2-3 Inch
- By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 51, 57, 64, 71, 76mm (2-3 inch) with multiple adapters. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC23) $94.68

Allis Chalmers W Pre Cleaner Assembly, Turbo 5 Inch
Pre Cleaner Assembly, Turbo 5 Inch
- By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 5 inch pipe. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC5) $137.82

Allis Chalmers W Pre Cleaner Assembly, Turbo 6 Inch
Pre Cleaner Assembly, Turbo 6 Inch
- By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 6 inch. Suitable for engines up to 450 HP. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering. (Item #: TPC6) $194.39

Allis Chalmers W Sediment Bowl Gasket, 2-1\8 inch
Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.00

Allis Chalmers W Stop Cable
Stop Cable
- This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Item #: 109399, Ref: PTSTOP) $11.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Fuel System / Air Intake

[Categories]   [All W Parts]   [All Allis Chalmers Models]  







PayPal


Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2024 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy