| |
Return to List
WD 45 - Thanks Grandpa | In 2005 my grandpa drove down a state road and saw an Allis-Chalmers wd45 and thought I would like it so he pulled over and bought it just for me! He told me that when he bought it he drove it home, but we couldn't get it running at his place so we brought it to my house so I could work on it and hopefully get it running. Well the tractor sat until last week then I pushed it into the shop and started to work on it. I started out by putting a sedimite bowl on the tractor, because it had none, then I replaced the fuel line. Now I had gas to the carb. then I turned the motor then discovered that I had gas to the motor but the spark plugs were wet and not igniting the fuel so then I decided to go ahead and put new points and sparkplugs in but still no luck so I got out my test light and trased the problem. A hot wire was not connected so I stripped the wires and rebinded them. Finaly it worked!!!! I did it all by myself! Then I filled the POWER STERING, then the hydraulic reservoir, started my tractor and paraded around the yard just like a king on his greasy throne. Recently I bought a A-C loader and cultivators and I plan to put the loader on. My name is Charles Riddle from Rochester In. I am 15 yrs old and taught myself everything I know, but my teachers taught me to spell ha ha. If you want to talk to me about tracors or advise please call me plus I am looking hard for a two row mounted corn picker for the 45 and would appreciate any information on one (I don't have alot of money to spend) dont be afraid to email me or call 574 223 4830 or ac_roto@hotmail.com carl, IN, entered 2006-04-04 My Email Address: Not Displayed |
Return to List
Home
| Forums
Today's Featured Article -
The Engine Rebuild Kit - by Curtis Von Fange. I always liked engine rebuild kits. They have all the replacement parts for overhauling an engine without going to the store to get gaskets, special measuring tools, or miscellaneous parts. They come neatly packaged, clean and tidy. But it's important not to let that packaging lull you into a false sense of security. The appearance of matching sleeves, pistons, rings, and bearings can cause frustration and agony if not properly measured and installed in a workshop environment. Following c
... [Read Article]
Latest Ad:
444 diesel Massey Harris
[More Ads]
Copyright © 1997-2023 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|