Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
Classified Ads
Photo Ads
Tractor Parts

Discussion Forums
Project Journals
Your Stories
Show & Pull Guide
Events Calendar
Hauling Schedule

Tractor Photos
Implement Photos
Vintage Photos
Help Identify
Parts & Pieces
Stuck & Troubled
Vintage Ads
Community Album
Photo Ad Archives

Research & Info
Tractor Registry
Tip of the Day
Safety Cartoons
Tractor Values
Serial Numbers
Tune-Up Guide
Paint Codes
List Prices
Production Nbrs
Tune-Up Specs
Torque Values
3-Point Specs

Tractor Games
Just For Kids
Virtual Show
Museum Guide
Memorial Page
Feedback Form

Yesterday's Tractors Facebook Page

Contributed Article

Talk of the Town:
Tips for the First-Time Welder

This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!

The discussion started out with the following post:

" Just inherited a Lincon arc welder. Bringing it home tommorow. Have never tried to weld before. Any tips for a first-timer? Will buy a hood, and new rods on the way home. "

What followed are some interesting replies:

" Assuming it's a A.C buzz box your limited to a few rods. I'd start with all 1/8-diam. 6011-75-120 amps, rough bead good on rusty or dirty metal,good fo vert. down,flat,v-up use a slight whip motion [back and forth] motion to flatten bead.

6013 or 7014 - 90 to150 amps Both are similar for flat welding,vert-down with practice.Easy straight drag motion.Steel has to be clean,have to stay ahead of slag to avoid wormholes in bead, produces nice bead low splatter.

7018-[AC version only !!!!] 90-140 amps Nice bead Flat,v-up,overhead.Very strong and ductile weld the best of the bunch.Tends to be hard to restart the rod but this is normal.Drag this rod with slight weave to wash bead up against the weld joint. Uphill will come much later.

Keep all rods dry warm place, this should get you started. "

" Check your local school system for an Adult Education welding course. Wonderful resource, usually very inexpensive, good way to pick up on the basics. I'd never welded before either, took a course one night a week for 6 weeks, got the basics of gas welding, arc welding and MIG welding. Deal of a lifetime for me, at about $25 for the course. "

" I might add that the one thing that improved my welding the most was one of the auto-darkening helmets. They are fairly high-dollar but worth it in my opinion, as you never have a blind moment such as when pulling the hood down. You line the stinger up with the work, strike an arc and weld without even blinking your eyes. The lens darkens when the arc is struck, but before the arc light reaches your eyes! "

" I too have never welded w/ a stick, but I do have a Lincoln SP170 MIG welder. It's great for the smaller jobs, but have been thinking about getting a stick welder too. Are these Lincoln AC-225 (225A@20%duty cycle) "Buzz boxes" any good? I saw 1 at Home Depot for $209.00 What do you guys think, should I get this one or hold out for something else. I need to repair 3pt stuff that has 3/8" - 1/2" thickness.... "

" Enroll in a welding class at your local technical college. It doesn't cost much and you get a lot of hands on training. "

" The most important thing is to take the time to clean your materials before you start to weld. "

" Here's a tip for you. Always think safety first. There will come a time when you've got a small weld to do, perhaps when you are in a hurry, and you'll grab your equipment to get the job done quickly. NEVER weld without gloves on!! It's surprising how easily we forget what not to touch once we've welded. You cannot explain to anyone how hot that metal becomes... it takes a "first hand" experience! (Also, a welding cap is a necessity. Those of us who are follicly challenged do not like to sport burn marks on our dome) "

" (Also, a welding cap is a necessity. Those of us who are follicly challenged do not like to sport burn marks on our dome) . This also applies to those who are not follicly-challenged, unless they like the smell of burning hair! "

" Do yourself a favor and buy the companion tool for the welder...an angle grinder. Cleans up the metal prior to welding and cleans up the mess after.(I'm fairly new at it, too) Have Fun !!!! "

" Think about an autodarkening helmet. Greatest thing since sliced bread! "

" Get ear plugs so sparks won't go in your ears and you won't go deaf from that %$#!% 4 1/2 inch grinder you're going to buy. Use 1/8" 6011 rod to start. Its messy but easiest to start an arc and penetrates well. With it you can weld vertical from top down with practice. Next get 7014 the beginners perfect weld rod. For flat welds it sure looks good. 7018 rod needs DC and that cracker box don't do that. "

This information was gathered at the Tool Talk Discussion Board.

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Today's Featured Article - Product Review: Storm Covers - by Staff. We recently had a chance to try out the new Storm Cover for the Ford 9N, 2N and 8N tractor that is now being re-introduced to a new generation of Ford N-Series tractor owners. Originally produced more than 40 years ago, it is now enjoying a reproduction run that has been licensed by the Ford Motor Company. An original storm cover was used for the pattern, and this reproduction cover is indeed exactly as the original (of which we had previously only seen pictures of in miscellaneous old sale ... [Read Article]

Latest Ad: Oliver Hart Parr 28-44 or 90 fuel tank in good condition.... Make offer [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy