FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

• Support

Hub for John Deere Tractors

Click here to see parts by model

$photo of For tractor models 300, 301, 400, 401, 1020, 1120, 1520, 1530, 2010, 2020, 2030, 2040, 2120, 2240, 2630, 2640, 302, 820, 830, 920, 2440 serial number under 340999. Hub, 6 Bolt. Uses wheel bolt # WB916 9\16-18 x 1.69 inch.$
Hub - For tractor models 300, 301, 400, 401, 1020, 1120, 1520, 1530, 2010, 2020, 2030, 2040, 2120, 2240, 2630, 2640, 302, 820, 830, 920, 2440 serial number under 340999. Hub, 6 Bolt. Uses wheel bolt # WB916 9\16-18 x 1.69 inch. (Item #: 104768, Ref. T25809) $50.00

Wheel Hub - 6 Bolt For 1520 HD, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, 4430. This is a hub only. Uses wheel bearing kit WBKJD6 or WBKJD7 (depending on spindle), WB916 Bolts and hub cab A1555R. (Item #: 102237, Ref. R48763) $59.14

No
Picture
Wheel Hub - 8 Bolt For 2355, 2555, 2750, 2755, 2855, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030 (Item #: 102239, Ref. R0268) $134.00

Wheel Hub - 8 Bolt For 210C, 210LE, 2955, 300D, 3050, 3055, 310, 310A, 310B 310C, 310D, 310E, 310G, 310SE, 310SG, 315C, 315CH, 315D, 315SE, 315SG, 3255, 3350, 401D, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 480C Forklift, 482C Forklift, 485E Forklift, 486E Forklift, 488E Forklift, 6010, 6020, 6100, 6100D, 6110, 6110D, 6110E, 6110L, 6115D, 6120, 6120L, 6130, 6140J, 6200, 6200L, 6205, 6210, 6210L, 6215, 6220, 6220L, 6225, 6230, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6325, 6330, 6400, 6400L, 6400SP, 6405, 6410, 6410L, 6410S, 6415, 6415 Classic, 6420, 6420L, 6425, 6430, 6430 Premium, 6500, 6500 Sprayer, 6500L, 6505, 6510, 6510L, 6510S, 6515, 6520L, 6525, 6530, 6534, 6600 Sprayer, 6603, 6605, 6610, 6615, 6630, 6700 Sprayer, 6715, 7130, 7230, 7405, 7445, 7500, 9920 Cotton Picker, 9930 Cotton Picker, SE6010, SE6020, SE6100, SE6110, SE6120, SE6200, SE6210, SE6220, SE6300, SE6310, SE6320, SE6400, SE6410, SE6420, SE6510, SE6520 Replaces John Deere R49841 (Item #: 102240, Ref. R0267) $99.35

$photo of 6 Bolt Hub uses p\n WBKJD3 wheel bearing kit and p\n WB916 Bolt set (available separately). Fits 1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 1950, 2020, 2040, 2120, 2155, 2240, 2255, 2350 (Low profile), 2355 (Mid-Hi axle), 2355N, 2550, 2555 (Mid-Hi axle), 2755 (Mid-Hi axle), 820, 830, 840.$
Hub, Front Wheel, 6 Bolt - 6 Bolt Hub uses p\n WBKJD3 wheel bearing kit and p\n WB916 Bolt set (available separately). Fits 1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 1950, 2020, 2040, 2120, 2155, 2240, 2255, 2350 (Low profile), 2355 (Mid-Hi axle), 2355N, 2550, 2555 (Mid-Hi axle), 2755 (Mid-Hi axle), 820, 830, 840. (Item #: 102233, Ref. R47076) $58.00

Hub, Front Wheel, 6 bolt - Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Item #: 102236, Ref. R49839) $68.00

Hub, Front Wheel, 6 bolt - Fits the following tractors that use tire size 5.50-16 to 6.00-16 : 1020, 1520, 2020, 2030 (Item #: 104769, Ref. T21543) $47.00

Water Pump, with Hub ang Gaskets - For tractor models 310A, 310B, (410 serial number 169346 and up), (440, 440A, 440B serial number 169405 and up). With casting number R55130. (Item #: 108436, Ref. AR65261) $175.00

$photo of Hub with bushings (3\4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1\4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel.$
Hub Assembly - Hub with bushings (3\4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1\4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref. 63813BH) $39.00

$photo of 4-bolt, 5 inch bolt circle and 3-5\8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36.$
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5\8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref. BH1311) $56.00

No
Picture
Front Wheel Hub - 8 bolts on 8 inch bolt circle. Pilot 6 inches, 6.660 inch hub length, 4.592 inch inner bearing diameter, 3 inch outer bearing diameter. Uses 5\8 inch bolts. Includes Bearing Cups (not bearings). Uses Wheel Bearing Kit # WBKJD10 and Wheel Bolt # WB58. For tractor models 2555, 2750, 2755, 2855, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030. Industrial models: 410, 415, 500, 510, 610, 700, 710, 2355. (Item #: 102239, Ref. R63556) $134.00

Wheel Hub - This wheel hub fits the following John Deere tractor models: 210C, 300, 300B, 300D, 301, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 1020, 1520, and 1640. Replaces the part number T21545. Uses wheel bolt WB916 and hub cap A1555R. (Item #: 102234, Ref. T21545) $77.00

Wheel Hub Cap - This wheel hub cap fits the following tractor models: 210C, 300, 300B, 300D, 301, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 1020, 1030, 1120, 1130, 1520, 1520 HD, 1630, 1640, 1830, 2020, 2030, 2040, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, and 4430. Replaces part number A1555R. Fits hubs: T21545 and R48763. (Item #: 102235, Ref. A1555R) $15.20

$photo of This is a press in hub cap. It is used With R47076, T25809 and T21543 Front Wheel Hubs. Fits John Deere Models 820 (After Serial Number 042925), 830 (Non-Utility), 920 (After Serial Number 042925), 940, 1020 (After Serial Number 042925), 1030 (w\Standard Front Axle), 1040, 1120 (After Serial Number 042925), 1130 (w\Standard Front Axle), 1140, 1630 (w\Standard Front Axle), 1640 (Low Type), 2020 (After Serial Number 042925), 2040 (After Serial Number 350000), 2120 (After Serial Number 042925), 2150 (Non-General Purpose), 2155, 2255, 2355N, 2240, 2350 (Low Type), 2355 (w\Standard Front Axle), 2550 (Low Type), 2555 (w\Standard Front Axle), 2755 (w\Standard Front Axle), 2855N (w\Standard Front Axle) Replaces N52048$
Hub Cap - This is a press in hub cap. It is used With R47076, T25809 and T21543 Front Wheel Hubs. Fits John Deere Models 820 (After Serial Number 042925), 830 (Non-Utility), 920 (After Serial Number 042925), 940, 1020 (After Serial Number 042925), 1030 (w\Standard Front Axle), 1040, 1120 (After Serial Number 042925), 1130 (w\Standard Front Axle), 1140, 1630 (w\Standard Front Axle), 1640 (Low Type), 2020 (After Serial Number 042925), 2040 (After Serial Number 350000), 2120 (After Serial Number 042925), 2150 (Non-General Purpose), 2155, 2255, 2355N, 2240, 2350 (Low Type), 2355 (w\Standard Front Axle), 2550 (Low Type), 2555 (w\Standard Front Axle), 2755 (w\Standard Front Axle), 2855N (w\Standard Front Axle) Replaces N52048 (Item #: 100685, Ref. T12688) $7.90

Clutch Release Bearing and Hub - This Clutch Release Bearing and Hub is used on 820, 920, 1020, 1120, 2020, 2120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 2040, 2240, 2840 Replaces AL27231 (Item #: 121895, Ref. AL27231) $123.00

PTO Clutch Hub - Made to OEM Specifications, this New PTO Clutch Hub replaces John Deere part numbers R50123 and R56854. 35 internal teeth, 48 external teeth. It is used on John Deere models; 4030, 4040 (Quad and Syncro Range Transmission), 4040S, 4050 (Quad Range Transmission), 4055 (Quad Range Transmission), 4230 (Quad and Syncro Range Transmission), 4240 (Quad and Syncro Range Transmission), 4240S, 4250 (Quad Range Transmission), 4255 (Quad Range Transmission), 4350, 4430, 4440 (Quad and Syncro Range Transmission), 4450 (Quad Range Transmission), 4455 (Mexico), 4455 (Quad Range Transmission) (Item #: 173221, Ref. R56854) $328.00

Traction Clutch Hub - Used on John Deere models; 4030, 4040 (Quad and Syncro Range Transmission), 4040S, 4050 (Quad Range Transmission), 4055 (Quad Range Transmission), 4230 (Quad and Syncro Range Transmission), 4240 (Quad and Syncro Range Transmission), 4240S, 4250 (Quad Range Transmission), 4255 (Quad Range Transmission), 4350, 4430 (Quad and Syncro Range Transmission), 4440 (Quad and Syncro Range Transmission), 4450 (Quad Range Transmission), 4455 (Mexico), 4455 (Quad Range Transmission), this hub has 19 splines and 48 Teeth. (Item #: 173339, Ref. R50346) $294.00

Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref. ZP0750110147) $70.00

Hub Seal, Outer - Used on many MFWD (mechanical four wheel drive) front ends, this seal has an Inside Diameter of 1.814 inches, Outside Diameter of 2.568 inches, and Width of 0.671 inches. It replaces OEM numbers 1429645, 81288C1, 81288C3, 83959483, ZP0750110134, AL61448, AL39338, 31372000, V31372000 (Item #: 104716, Ref. ZP0750110134) $22.00

Hub Seal - Used on ZF Mechanical For Wheel Drive hubs, this seal measures 5.374 inches inside diameter, 6.516 inches outside diameter and 0.507 inches wide. Replaces AL68616, ZP0750110156, 1964236C1, 81867542, 83946555. (Item #: 104717, Ref. AL68616) $46.00

Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL325 Mechanical Four Wheel Drive front ends. This part replaces L40036, ZP4472351239, 81428C1, 83946561, E1NN3B626AA. Verify your axle before ordering. Some of the models listed used more than one 4 wheel drive front end. Used on John Deere 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N serial number 430000 and up, 2550, 2555, 2650, 2855N (Item #: 124687, Ref. E1NN3B626AA) $97.00

Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL345, APL350, APL1351, APL1551 Mechanical Four Wheel Drive front ends. This part replaces E2NN3B626CA, 87759380, 87772879, L40004, 81670C1, ZP4472353195, ZP4472353682. Some of the models listed used more than one 4 wheel drive front end. Used on John Deere 2140 serial number 430000 and up, 2750, 2950, 2955, 3040 serial number 430000 and up, 3055, 3140 serial number 430000 and up, 3150, 3155, 3255 (Item #: 156197, Ref. L40004) $100.00

Wheel Hub Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL1351 Mechanical Four Wheel Drive front ends. This part replaces, L35606, ZP1927576, 3216588R1, 81927576. Some of the models listed used more than one 4 wheel drive front end. Verify part number or axle number before ordering. Used on John Deere: 2040 serial number 350000 and up, 2150, 2240 serial number 350000 and up. (Item #: 124686, Ref. L35606) $36.00

Hub Cap - Used on John Deere 2030, 2510, 2630, 4030, 4230, 4320, 4430, 7520, 7520, 2150, 2440, 2640, 2755, 2840, 4040, 4040, 4050, 4250, 4240, 4240, 4450, 4455, 4440 with one of the following hubs: R49839, R49841, P58400, R112915. This part is also used as an oil pump end cap for oil pump RE591837. This cap is not threaded. It taps into place. 2.688 inch outside diameter of base where it fits into the hub, 1.750 inches tall. (Item #: 179597, Ref. R50992) $15.10

$photo of <UL> <li>For John Deere tractor models 4055 (late s\n), 4255 (late s\n), 4455 (late s\n), 7210, 7410, 7510, 7600, 7610, 7710, 7810<\li> <li>Compatible with John Deere Harvester (s) 7200, 7400, 7800<\li> <li>Replaces John Deere OEM number R112915<\li> <li>8 bolt hub<\li> <\UL>$
Wheel Hub - For John Deere tractor models 4055 (late s\n), 4255 (late s\n), 4455 (late s\n), 7210, 7410, 7510, 7600, 7610, 7710, 7810 Compatible with John Deere Harvester (s) 7200, 7400, 7800 Replaces John Deere OEM number R112915 8 bolt hub (Item #: 102241) $141.00

$photo of <UL> <li>For John Deere tractor models 2440, 2640<\li> <li>Replaces John Deere OEM number R62436<\li> <li>6 Bolt Front Hub<\li> <\UL>$
Front Wheel Hub - 6 Bolt - For John Deere tractor models 2440, 2640 Replaces John Deere OEM number R62436 6 Bolt Front Hub (Item #: 104767) $198.87

$photo of <UL> <li>For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960<\li> <li>Replaces John Deere OEM number RE40456<\li> <\UL>$
Power Shift Pack - Planetary Clutch Hub - For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960 Replaces John Deere OEM number RE40456 (Item #: 109711) $93.98

$photo of <UL> <li>For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960<\li> <li>Replaces John Deere OEM number RE16825<\li> <\UL>$
Power Shift Pack - High Range Clutch Hub - For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960 Replaces John Deere OEM number RE16825 (Item #: 109714) $340.00

No
Picture
Power Shaft Clutch Hub - For John Deere tractor models 4000 (s\n 201000-later), 4020 (s\n 201000-later), 4230 Replaces John Deere OEM number R41043 Transmission Clutch Pack, Rear, Power Shift (Item #: 116835) $485.00

$photo of <UL> <li>For John Deere tractor models 4055 (late s\n), 4255 (late s\n), 4455 (late s\n), 7210, 7410, 7510, 7600, 7610, 7710, 7810<\li> <li>Compatible with John Deere Harvester(s) 7200, 7400, 7800<\li> <li>Replaces John Deere OEM number R112915<\li> <li>8 bolt hub<\li> <\UL>$
Wheel Hub - For John Deere tractor models 4055 (late s\n), 4255 (late s\n), 4455 (late s\n), 7210, 7410, 7510, 7600, 7610, 7710, 7810 Compatible with John Deere Harvester(s) 7200, 7400, 7800 Replaces John Deere OEM number R112915 8 bolt hub (Item #: 102241) $141.00

$photo of <UL> <li>For John Deere tractor models 5105, 5205, 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5520, 5525<\li> <li>Replaces John Deere OEM number R125548<\li> <li>Replaces Carraro manufacturer number 129952<\li> <li>Manufactured by Carraro to exact OEM specifications<\li> <\UL>$
Wheel Hub - Carraro - For John Deere tractor models 5105, 5205, 5310, 5320, 5325, 5400, 5415, 5420, 5425, 5500, 5520, 5525 Replaces John Deere OEM number R125548 Replaces Carraro manufacturer number 129952 Manufactured by Carraro to exact OEM specifications (Item #: 154459) $240.00

$photo of <UL> <li>For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5203, 5204, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5725<\li> <li>Replaces John Deere OEM number RE271425<\li> <\UL>$
Wheel Hub - For John Deere tractor models 5065M, 5070M, 5075M, 5080M, 5085M, 5090M, 5095M, 5100M, 5103, 5105M, 5203, 5204, 5225, 5303, 5310, 5325, 5403, 5410, 5415, 5425, 5503, 5525, 5603, 5605, 5610, 5615, 5625, 5705, 5715, 5725 Replaces John Deere OEM number RE271425 (Item #: 156220) $272.00

$photo of <UL> <li>For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 6170R, 6190R, 7200R (s\n 080000-earlier), 7630, 7720, 7730, 7820, 7830, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R (s\n 000101-053099), 8235R (s\n 016001-090000), 8260R (s\n 016001-090000), 8285R (s\n 016001-090000), 8300, 8310R (s\n 016001-090000), 8335R (s\n 016001-090000), 8400<\li> <li>Compatible with John Deere Harvester(s) 7450, 7455, 7460, 9935, 9965, 9970, 9976, 9986<\li> <li>Compatible with John Deere Drill(s) 1890, 1900, 1910<\li> <li>Replaces John Deere OEM number R113716<\li> <li>8 Bolt<\li> <li>9.252 Bolt Circle<\li> <li>5.998 Pilot Diameter<\li> <li>6.660 Hub Length<\li> <li>4.592 Inner Bearing Diameter<\li> <li>2.998 Outer Bearing Diameter<\li> <\UL>$
Wheel Hub - 8 Bolt - For John Deere tractor models 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 6170R, 6190R, 7200R (s\n 080000-earlier), 7630, 7720, 7730, 7820, 7830, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R (s\n 000101-053099), 8235R (s\n 016001-090000), 8260R (s\n 016001-090000), 8285R (s\n 016001-090000), 8300, 8310R (s\n 016001-090000), 8335R (s\n 016001-090000), 8400 Compatible with John Deere Harvester(s) 7450, 7455, 7460, 9935, 9965, 9970, 9976, 9986 Compatible with John Deere Drill(s) 1890, 1900, 1910 Replaces John Deere OEM number R113716 8 Bolt 9.252 Bolt Circle 5.998 Pilot Diameter 6.660 Hub Length 4.592 Inner Bearing Diameter 2.998 Outer Bearing Diameter (Item #: 160886) $326.00

$photo of <UL> <li>For John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5415, 5420, 5500, 5510, 5520, 5615, 5715<\li> <li>Replaces John Deere OEM number R109453<\li> <li>For a Carraro version use Item #: 154458<\li> <\UL>$
Front Wheel Hub - 6 Bolt - Economy - For John Deere tractor models 5200, 5210, 5220, 5300, 5310, 5320, 5400, 5410, 5415, 5420, 5500, 5510, 5520, 5615, 5715 Replaces John Deere OEM number R109453 For a Carraro version use Item #: 154458 (Item #: 160887) $207.00

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy