(800) 853-2651 View Cart

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books

• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

Ford 8N, 9N, 2N Tractor Seal

Click here to see parts by model

Ford Steering Sector Retainer Seal
- This Steering Sector Retainer Seal is used on Ford Tractors 1949 to 1964. It replaces 8N3585, 8N3591, 8N3591A, 8N3591B, D5UZ3591A, D5UZ3591B (Part No: 8N3591B)

Ford Steering Column Felt Dust Seal Retainer
- This Steering Column Felt Dust Seal Retainer is used on Ford 9N and 2N 1939-1947. It replaces original part number 9N3661. (Part No: 9N3661)

Ford Felt Brake Dust Seal
- This Felt Brake Dust Seal is used on Ford 9N and 2N Tractors 1939 to 1947. It replaces original part number 9N2217. Two used per tractor. Sold individually. (Part No: 9N2217)

Ford Brake Backing Plate Felt Seal
- For tractor models 8N, NAA, Jubilee. This part repairs 1 wheel, 2 required per tractor. (Part No: 8N2217)

Ford Rear Axle Outer Seal
- Oil Seal, outer, rear axle shaft. Inside diameter 2 3\8 inches. For tractors 9N, 2N, (1939-1947). 2.437 inch inside diameter, 3.485 inch outside diameter. For 9N, 2N. (Part No: D6NN4251A)

Ford Axle Oil Seal-Outer, Pack of 2
- For tractor models 8N to serial number 486753. inside diameter 2 3\4 inch. Rear Axle Oil Seals. Also comes as part of A8NN4248A Assembly. (Part No: A8NN4251A)

Ford Axle Seal, Outer Pair
- For tractor models 8N serial number 486753 and up, NAA, Jubilee. Comes in pairs. 3-3\4 inch outside diameter, 2-7\8 inch inside diameter. (Part No: D5NN4115A)

Ford R Seal Retainer
- Retainer, for Rear Crankshaft Oil Seal. For tractor models 8N, 9N, 2N. (Part No: 91A6335)

Ford Rear Axle Sure-Seals
- Fits 9N, 2N. 1 pair. No need to split collar and replace old outer axle seal. Sure-Seal fits over top of sweat collar. (Part No: SS92)

Ford Oil Seal, Main Drive Gear
- This main drive oil seal is for 3 and 4 speed transmissions on tractor models: 8N, 9N, 2N, 600, 700, 800, 900, NAA, NAB, Jubilee. Replaces part number: 8N7052A, 8N7052A2, C0NN7C248A. (Part No: 8N7052A)

Ford Axle Seal, Inner Pair, Pack of 2
- This is a pair of seals. These seals measure 2.000 inches inside diameter, 2.754 inches outside diameter, and are 0.510 inches wide. The seal replaces OEM numbers: 8N4233A, C4NN4233A, NCA4233A, NDA7048A, 8N4233A1, 1014202M1, 103682A, 103682A, 10A12051, 10A2500, 12A2500, 30-3084914, 1E3377, E3377, 103682A, 10A12051, 157166A (Part No: 8N4233A)

Ford Governor Dust Seal
- Replacement Governor Dust Seal. For tractor models 8N, 9N, 2N. (Part No: 9N18183)

Ford Steering Shaft Seat & Seal Kit - Upper
- For 8N, NAA. This kit contains: 8N3570 seal (item 3), 8N3520 spring (item 4), 8N3518 seat (item 5), 8N3517 bearing (upper) (item 6). (Part No: 8N_STRKIT)

Ford Seal, Front Wheel Hub
- Front Wheel Hub Dust Seal. 2 11\16 inch outside diameter, 2 inches inside diameter. Fits: 2000 1955-1964 USA BUILT, 2N 1939-1947, 4000 1955-1964 USA BUILT, 600 1955-1964 USA BUILT, 700 1955-1964 USA BUILT, 800 1955-1964 USA BUILT, 8N 1948-1952, 900 1955-1964 USA BUILT, 9N, NAA 1953-1954. Price shown is for each, sold only in multiples of 2 items. Can replace 9N1190B. (Part No: NCA1190A)

Ford Valve Stem Seal
- Valve Stem Seal for valve guide in 120 CID 4 cylinder gas engine. For 8N, 9N, 2N. Priced each. If you order 1, you will receive 1 seal. 4 used per tractor. (Part No: 8BA6571)

Ford Steering Arm Dust Seal
- For tractor models 2000, 3000, 4000, 600, 800, 8N, 900, NAA. Replaces C5NN3125A. (Part No: 8N3528)

Ford Axle Oil Seal Gasket, Inner
- For 8N 1948-1950. Used between A8NN4251A Seal & Retainer in Oil seal assembly. Price is for each. (Part No: 8N4290)

Ford Cyclone Air Cleaner Rubber Seal
- Rubber Seal, For CYCLONE Air cleaner only. Exact of original. Price shown is for each, sold only in multiples of 2 items. (Part No: 230055)

Ford PTO Shaft Seal, Double Lip
- For All Models: 1939 thru 1964 with 1-1\8 inch or 1-3\8 inch PTO shaft. 2.45 inch outside diameter, 1 5\8 inch inside diameter, 5\8 inches wide. Replaces OEM numbers : D8NN703AA & D9NN703BA, and 9N703B. (Part No: D9NN703BB)

Ford Steering Column Dust Seal
- For tractor models 9N, 2N. 1939-1957. (Part No: 9N3660)

Ford Crankshaft Seal, Rear Pair, Pack of 2
- Rope Seal, REAR. Upper and lower is the same part. For tractor models 8N, 9N, 2N. Replaces 8N6701 and 8N6702. (Part No: 8N6701)

Ford Steering Column Seal
- This Felt Dust Seal is for the top of steering column. Tractors: 8N, through 4000 4 cylinder. (1948-1964). (Part No: 8N3570)

Ford Crankshaft Seal, Front Pair
- Rope Seal, FRONT. Upper and lower is the same part. For tractor models 8N, 9N, 2N. Price is for 2 pieces. Order quantity 1 for 1 engine. Replaces 8N6700 and 8N6707. (Part No: 8N6700)

Ford Water Pump Sealant
- RTV Blue 3.35 oz. tube. (Part No: PRM77BR)

Ford Sealed Beam Bulb, 6 Inch
- The Sealed Beam Bulb is 6 Volt, 5.625 inches in diameter and has two contacts. Fits models: NAA, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. It replaces Ford part number 310061. (Part No: 1002802M91)

Ford Steering Sector Shaft Seal
- Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Part No: 8N3586)

Ford Spindle Dust Seal
- This Spindle Dust Seal is used on Ford 9N and 2N Tractors. It replaces original part number 9N3528. (Part No: 9N3528)

Ford Cyclone Air Cleaner Glass Jar Seal
- Cyclone Air Cleaner Glass Pint Jar Seal (Part No: ACP1248)

Ford Sealed Beam Bulb 12V
- Sealed beam bulb, 12 volt, 5-3\4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Part No: 70230252)

Click here to see parts by model


Customer Service
Monday - Friday

Order online

Your Shopping
is Secure


YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2018 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.