FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

• Support

Case Tractor Hub

Click here to see parts by model

Case Front Wheel Hub - For tractor models 770, 870, 970, 1070, 1175, 730, 830, 930-DOM, 1030, 2090, 3390, 2094, 2294, 1896, 2096, 480B, 430, 530, 480CK. Casting number 57332 (Item #: 100327, Ref. A57336) $118.00

Case Front Wheel Hub - For 970 and 1070 SN# 8675001-Up. 1175, 2090, 2290, 2094, 2294, 1896 and 2096 With STD Wheel Base, 580B, 580CK. (Item #: 100328, Ref. A51157) $117.00

Case Front Wheel Hub - For tractor models 1270, 1370, 1570, 1896, 2096, 2390, 2394, 2590, 2394, 2594, 1896, 2096, 480C, 480D, 480E, 580C, 580D, 580E, 580F, 580K, 580L, 580M, 580SD, 580SK, 580SL, 580SM, 584C, 584D, 584E, 585C, 585D, 585E, 586C, 586D, 586E, 590, 590SL, 680E, 680G, 680H, 780B, 780B, 780C. This hub uses WBKCA3 bearing kit (not included). Replaces A63799, A66759 (Item #: 100329, Ref. A66759) $125.00

$photo of Bare Hub (no bearings etc). 8 bolt - 5\8 . Fits 970, 1170, 1175, 1896, 2094, 2096, 2290, 2294, 580CK (SN# 8673410 and above), 580B. Replaces A51157, A39144.$
Case Wheel Hub, Front - Bare Hub (no bearings etc). 8 bolt - 5\8 . Fits 970, 1170, 1175, 1896, 2094, 2096, 2290, 2294, 580CK (SN# 8673410 and above), 580B. Replaces A51157, A39144. (Item #: 100328, Ref. S.57829) $117.00

Case Water Pump, with Hub - For tractor models S, SC, SO. This water pump with hub, side gasket and backplate is completely new, from the seal to the housing. It fits the Case-IH Tractor S, SC, and SO. (NOTE: replaces A48361, A48361-R). Casting number 110166. (Item #: 122790, Ref. 2540AA) $114.00

$photo of Early parallel spindles. Contains OEM part numbers for the bearings of 255802552 and 19150. Contains seal measuring 2.75 inches inside diameter, 3.75 inches outside diameter and 1\2 inch width. For tractor models 880, 885, 950, 990, 995, 996, 1190, 1290, 1390, (1194 up to SN# 11480679), (1294 up to SN# 11491145), (1394 up to SN# 11504411), 1190, 1290, 1390, 1194, 1294, 1394.$
Case Hub Bearing Kit, Front - Early parallel spindles. Contains OEM part numbers for the bearings of 255802552 and 19150. Contains seal measuring 2.75 inches inside diameter, 3.75 inches outside diameter and 1\2 inch width. For tractor models 880, 885, 950, 990, 995, 996, 1190, 1290, 1390, (1194 up to SN# 11480679), (1294 up to SN# 11491145), (1394 up to SN# 11504411), 1190, 1290, 1390, 1194, 1294, 1394. (Item #: 104394, Ref. K962986) $153.00

Case Hub Bearing Kit, Front - For tractor models (1194 SN# 11480680 and up), (1294 SN# 11491146 and up), (1394 SN# 11504412 and up). (Item #: 104395, Ref. K262214) $23.70

Case Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Item #: 108599, Ref. LU10088) $10.70

$photo of Hub with bushings (3\4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1\4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel.$
Case Hub Assembly - Hub with bushings (3\4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1\4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref. 63813BH) $39.00

$photo of 4-bolt, 5 inch bolt circle and 3-5\8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36.$
Case Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5\8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref. BH1311) $56.00

Case Hub Seal, MFWD - Extensively used on Carraro mechanical four wheel drive front axles, this hub seal measures 149mm (5.86614 inches) x 176mm (5.86614 inches) x 16mm (0.629921 inches). Replaces OEM numbers 9968085, K395102, 47108806, 83996064, 82920209, 294169A1, 247877A1, 130182A1, 1349265C1, CAR126324, CAR47705, 3225110, 0003225110, 82920209, 3996064, 83996064, 83957862, 9968085, 153326219, 153326621, 1349265C1, 153326301, 09968085, 83952509, 83952530, CAR118556, CAR126324, CAR47705, CAR126390, 3501510M1, 3475598M1, 3475533M1, 3523062M1, 3541510M1 (Item #: 157753, Ref. 247877A1) $40.00

$photo of Used on Mechanical Four Wheel Drive Case\ David Brown models: 1394 up to serial number 11503000, 1494 up to serial number 11518000, 2094, 3294. Measures 145mm inside diameter x 170mm outside diameter x 16mm wide.$
Case Hub Seal - Used on Mechanical Four Wheel Drive Case\ David Brown models: 1394 up to serial number 11503000, 1494 up to serial number 11518000, 2094, 3294. Measures 145mm inside diameter x 170mm outside diameter x 16mm wide. (Item #: 179424, Ref. N8898) $66.00

Case Front Wheel Hub - Used on Case models 300, 300B, 400B, 430, 470, 530, 570, this 6 bolt hub replaces OEM numbers A39251, G13065. Order wheel bearing kit WBKCA1 separately if needed. (Item #: 114576, Ref. A39251) $187.00

Case Hub Inner Seal - The measurements on this seal are 1.575 inches inside diameter, 2.169 inches outside diameter, and 0.315 inches thick. It is used in the hub of Carraro 4WD front axles. This part replaces 6190246M1, 118675, 1967605C1, CAR118675, 82848086, 3946626, 83946626, 83937304, 85807964, 83930043, 96839, 47110069, N8897, K260142, K205152, K965236, 1-33-741-636, 3541488M1, 3426192M1, 3019957X1 (Item #: 104714, Ref. CAR118675) $10.50

$photo of <UL> <li>For Case tractor models 1470, 1570, 2090, 2290, 2294, 2390, 2394, 2590, 2594, 3294, 4490, 4494, 4690<\li> <li>Compatible with Case Construction and industrial models W14, W14FL, W14H, W18, W20, W20B, W24B, W24C, W26B, W30, 300C, 400C, 600, 680G, 680H, 780, 780B, 800, 850B, 850C, 880, 880B, 880C, 980, 980B, 1080, 1080B, 1150B, 1150C, 1150D, 1155D, 1280, 1280B, 1450, 1450B, 1455B <li>Replaces Case OEM number 199352A1, A152153, A62974, A155180<\li> <\li> <li>Compatible with Case IH tractor models 2294, 2394, 2594, 3294, 3394, 3594, 4494<\li> <li>Replaces Case IH OEM number A157145<\li> <li>Replaces Casting number A58642<\li> <li>Includes Mounting Gasket<\li> <li>4-1\2 Impeller<\li> <li>Tapped Shaft<\li> <li>For a Remanufactured version of this sku use Item #: 124643<\li> <\UL>$
Case Water Pump less Hub - For Case tractor models 1470, 1570, 2090, 2290, 2294, 2390, 2394, 2590, 2594, 3294, 4490, 4494, 4690 Compatible with Case Construction and industrial models W14, W14FL, W14H, W18, W20, W20B, W24B, W24C, W26B, W30, 300C, 400C, 600, 680G, 680H, 780, 780B, 800, 850B, 850C, 880, 880B, 880C, 980, 980B, 1080, 1080B, 1150B, 1150C, 1150D, 1155D, 1280, 1280B, 1450, 1450B, 1455B Replaces Case OEM number 199352A1, A152153, A62974, A155180 Compatible with Case IH tractor models 2294, 2394, 2594, 3294, 3394, 3594, 4494 Replaces Case IH OEM number A157145 Replaces Casting number A58642 Includes Mounting Gasket 4-1\2 Impeller Tapped Shaft For a Remanufactured version of this sku use Item #: 124643 (Item #: 100260) $128.00

$photo of <UL> <li>For Case tractor models 1470, 1570, 2090, 2290, 2294, 2390, 2394, 2590, 2594, 3294, 4490, 4494, 4690<\li> <li>Compatible with Case Construction & industrial models W14, W14FL, W14H, W18, W20, W20B, W24B, W24C, W26B, W30, 300C, 400C, 600, 680G, 680H, 780, 780B, 800, 850B, 850C, 880, 880B, 880C, 980, 980B, 1080, 1080B, 1150B, 1150C, 1150D, 1155D, 1280, 1280B, 1450, 1450B, 1455B <li>Replaces Case OEM number 199352A1, A152153, A62974, A155180<\li> <\li> <li>Compatible with Case IH tractor models 2294, 2394, 2594, 3294, 3394, 3594, 4494<\li> <li>Replaces Case IH OEM number A157145<\li> <li>Replaces Casting number A58642<\li> <li>Includes Mounting Gasket<\li> <li>4-1\2 Impeller<\li> <li>Tapped Shaft<\li> <li>For a Remanufactured version of this sku use Item #: 124643<\li> <\UL>$
Case Water Pump less Hub - For Case tractor models 1470, 1570, 2090, 2290, 2294, 2390, 2394, 2590, 2594, 3294, 4490, 4494, 4690 Compatible with Case Construction & industrial models W14, W14FL, W14H, W18, W20, W20B, W24B, W24C, W26B, W30, 300C, 400C, 600, 680G, 680H, 780, 780B, 800, 850B, 850C, 880, 880B, 880C, 980, 980B, 1080, 1080B, 1150B, 1150C, 1150D, 1155D, 1280, 1280B, 1450, 1450B, 1455B Replaces Case OEM number 199352A1, A152153, A62974, A155180 Compatible with Case IH tractor models 2294, 2394, 2594, 3294, 3394, 3594, 4494 Replaces Case IH OEM number A157145 Replaces Casting number A58642 Includes Mounting Gasket 4-1\2 Impeller Tapped Shaft For a Remanufactured version of this sku use Item #: 124643 (Item #: 100260) $128.00

$photo of <UL> <li>For Case tractor models 730, 770, 830, 870, 930, 970, 1030, 1070, 1175, 1896, 2090, 2094, 2096, 2290, 2294<\li> <li>Replaces Case OEM number A27139<\li> <\UL>$
Case Wheel Hub Seal - For Case tractor models 730, 770, 830, 870, 930, 970, 1030, 1070, 1175, 1896, 2090, 2094, 2096, 2290, 2294 Replaces Case OEM number A27139 (Item #: 140552) $92.00

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy