FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Allis Chalmers Tractor Rim

Click here to see parts by model

Power Adjust Rim - Here is an 11 inch x 28 inch, 4-rail type Power Adjust Rim. For double ramp clamp. Holes for stop adjustment are drilled 90 degrees perpendicular to side of rim not 90 degrees to rail. Stop holes are angled. Uses differen1 stop bodies, screws and clamps, depending on the application. Fits tire size 12.4 inches x 28 inches, 13.6 inches x 28 inches. Verify OEM Part number before ordering. (Item #: 103777, Ref. C5NN1050H) $450.00

$photo of 15 inch x 3 inch. 5-Lug, For model B, C and CA. 2-3\4 Inch Pilot, 2 5\8 Inch Bolt center to center and 3 1\2 Inch Backspacing Replaces: 231520, 70231520$
Allis Chalmers Front Rim - 15 inch x 3 inch. 5-Lug, For model B, C and CA. 2-3\4 Inch Pilot, 2 5\8 Inch Bolt center to center and 3 1\2 Inch Backspacing Replaces: 231520, 70231520 (Item #: 103753, Ref. R0089) $146.00

No
Picture
Allis Chalmers Paint, Gray Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100122, Ref. TP2700GAL) $59.00

No
Picture
Allis Chalmers Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref. TP2700QT) $22.40

No
Picture
Allis Chalmers Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref. TP2700SP) $8.30

No
Picture
Allis Chalmers Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref. TP3987GAL) $59.00

Allis Chalmers Rear Rim, Power Adjust - 10 inches x 24 inches, 4 rail, double ramp clamp, holes in rail for stop body screw are parallel to axle not at angle. For tractor models CA, D10, D12. Additional $20 shipping due to the weight and size. (Item #: 103775, Ref. 70225184) $664.00

No
Picture
Allis Chalmers Front Rim - 4.5 x 16, uses 6.0 x 16 tires. For model 5040. (Item #: 154598, Ref. 72089060) $124.00

$photo of New and Improved ~ 1\2 inch swirl, machine turned design on stainless steel. For tractor models (D15 serial number 9001 and up), (D17 serial number 32001 to 75000), D19. Replaces 234433, 70234433.$
Allis Chalmers Instrument Panel Trim - New and Improved ~ 1\2 inch swirl, machine turned design on stainless steel. For tractor models (D15 serial number 9001 and up), (D17 serial number 32001 to 75000), D19. Replaces 234433, 70234433. (Item #: 179245, Ref. 234433) $95.00

Allis Chalmers Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 235727, 237405, 70235727, 70237405 (Item #: 103768, Ref. FW60166) $92.00

Allis Chalmers Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref. FW55166) $78.00

$photo of This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5\8 inches-18 x 2.82 inches long. Verify length before ordering.$
Allis Chalmers Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5\8 inches-18 x 2.82 inches long. Verify length before ordering. (Item #: 184824, Ref. 350719KIT) $23.00

Allis Chalmers Wheel Rim Lug - Welded onto blank rear rims. Used on Tractors with Standard Rims. (Item #: 178744, Ref. NPN1050A) $18.40

Allis Chalmers Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref. FW60156) $104.00

Allis Chalmers Front Rim-Heavy Duty - Front Rim with weight holes. 4.5 inch x 16 inch, 2500 lb. capacity. 6 bolt, 6 inch circle, 4.62 inch pilot for 5.50 inch x 6.00 inch x 16 inch tires. Also replaces OEM # 70235086, 70248460. Fits Models: (D15 with serial number below 9001), (D17 with serial number below 75001), D19, ED40, 160, 170, 175, 180, 185, 190, 190XT, 6060, 6070. Additional $15 shipping due to weight. (Item #: 103756, Ref. 8N1015D) $70.00

$photo of This rim is 12 inch x 28 inch with 6 loop clamps. Loops are designed for 5\8 inch bolts.$
Allis Chalmers Rim 12X28 6 Clamp - This rim is 12 inch x 28 inch with 6 loop clamps. Loops are designed for 5\8 inch bolts. (Item #: 103720, Ref. R2068) $160.00

$photo of Kit contains (1) 2.88 inch x 5\8 inch UNF bolt (bolts have a small key at end) with (1) nut.$
Allis Chalmers Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5\8 inch UNF bolt (bolts have a small key at end) with (1) nut. (Item #: 182520, Ref. S.04352) $3.00

$photo of <UL> <li>For Allis Chalmers tractor model D17<\li> <li>Width: 5.5 <\li> <li>Diameter: 16 <\li> <li>Holes: 5<\li> <li>Back Side: 4.750 <\li> <\UL>$
Allis Chalmers 5.5 inch x 16 inch 5 Bolt, Front Rim - For Allis Chalmers tractor model D17 Width: 5.5 Diameter: 16 Holes: 5 Back Side: 4.750 (Item #: 103757) $141.00

$photo of <UL> <li>For Allis Chalmers tractor models B, C<\li> <li>Replaces Allis Chalmers OEM number 70211201<\li> <li>Width: 9 <\li> <li>Diameter: 24 <\li> <li>Type: Bump<\li> <li>Bumps: 4<\li> <li>Rim Color: Off-White<\li> <\UL>$
Allis Chalmers 9 inch x 24 inch 4 Bump Rear Rim, Off-White - For Allis Chalmers tractor models B, C Replaces Allis Chalmers OEM number 70211201 Width: 9 Diameter: 24 Type: Bump Bumps: 4 Rim Color: Off-White (Item #: 103774) $254.00

No
Picture
Allis Chalmers 10 inch x 28 inch 6 Bump, Rear Rim - For Allis Chalmers tractor models RC, WC (s\n 81757-later), WD (early), WF (s\n 1904-later) Replaces Allis Chalmers OEM number 209464 Width: 10 Diameter: 28 Type: Bump Bumps: 6 Rim Color: Off-White (Item #: 103776) $390.00

No
Picture
Allis Chalmers 9 inch x 28 inch 6 Bump Rear Rim - For Allis Chalmers tractor model WC Width: 9 Diameter: 28 6 Bump Rim Color: Off-White (Item #: 111017) $235.40

$photo of <UL> <li>For Allis Chalmers tractor models D15, D17 (s\n 42001 - later), 160, 170 (with 28 rims), 175 (with 28 rims), 180 (with 28 and 30 Rims), 185 (with 28 and 30 Rims), 190, 190XT, 200, 220, 5040, 5045, 5050, 6060 (with 28 and 34 Rims), 6070 (with 28 and 34 Rims), 6080 (with 28 and 34 Rims), 6140 (with 28 rims), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050<\li> <li>Replaces Allis Chalmers OEM number 70235676<\li> <\UL>$
Allis Chalmers Power Adjust Rim Clamp - For Allis Chalmers tractor models D15, D17 (s\n 42001 - later), 160, 170 (with 28 rims), 175 (with 28 rims), 180 (with 28 and 30 Rims), 185 (with 28 and 30 Rims), 190, 190XT, 200, 220, 5040, 5045, 5050, 6060 (with 28 and 34 Rims), 6070 (with 28 and 34 Rims), 6080 (with 28 and 34 Rims), 6140 (with 28 rims), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050 Replaces Allis Chalmers OEM number 70235676 (Item #: 118628) $15.70

$photo of <UL><li>For Allis Chalmers tractor models D15, D17 (s\n 42001 - later), 160, 170 (with 28 rims), 175 (with 28 rims), 180 (with 28 and 30 Rims), 185 (with 28 and 30 Rims), 190, 190XT, 200, 220, 5040, 5045, 5050, 6060 (with 28 and 34 Rims), 6070 (with 28 and 34 Rims), 6080 (with 28 and 34 Rims), 6140 (with 28 rims), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050<\li><li>Replaces Allis Chalmers OEM number 70235676<\li><li>For a new version of this item use Item #: 118628<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Allis Chalmers Power Adjust Rim Clamp, Used - For Allis Chalmers tractor models D15, D17 (s\n 42001 - later), 160, 170 (with 28 rims), 175 (with 28 rims), 180 (with 28 and 30 Rims), 185 (with 28 and 30 Rims), 190, 190XT, 200, 220, 5040, 5045, 5050, 6060 (with 28 and 34 Rims), 6070 (with 28 and 34 Rims), 6080 (with 28 and 34 Rims), 6140 (with 28 rims), 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050Replaces Allis Chalmers OEM number 70235676For a new version of this item use Item #: 118628Used items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 418628) $10.01

$photo of <UL><li>For Allis Chalmers tractor models D21, 4W-220, 4W-305, 170, 175, 190, 200, 210, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550, 8785<li>Replaces Allis Chalmers OEM nos 70235525<\li><\li><li>Compatible with Massey Ferguson tractor models 1100, 1105, 1130, 1135, 1150, 1155, 1505 (1805), 1805, 2675, 2705, 2745, 2775, 2805, 3090, 3525, 3545, 3630, 3645, 3650, 3655, 3660, 3670, 3680, 3690, 4800, 4840, 4880, 4900, 6190, 8120, 8140, 8150, 8160<\li><li>Replaces Massey Ferguson OEM nos 507773M1<\li><li>Replaces Casting nos 507773<\li><li>For Non Power Adjust Rims<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Allis Chalmers Rim Clamp, Used - For Allis Chalmers tractor models D21, 4W-220, 4W-305, 170, 175, 190, 200, 210, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550, 8785Replaces Allis Chalmers OEM nos 70235525Compatible with Massey Ferguson tractor models 1100, 1105, 1130, 1135, 1150, 1155, 1505 (1805), 1805, 2675, 2705, 2745, 2775, 2805, 3090, 3525, 3545, 3630, 3645, 3650, 3655, 3660, 3670, 3680, 3690, 4800, 4840, 4880, 4900, 6190, 8120, 8140, 8150, 8160Replaces Massey Ferguson OEM nos 507773M1Replaces Casting nos 507773For Non Power Adjust RimsUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 497035) $15.01

$photo of <UL><li>For Allis Chalmers tractor models 9130, 9150, 9170, 9190, 9435, 9455, 9630, 9635, 9650, 9655, 9670, 9675, 9690, 9695, 9755 (s\n prior to K prefix), 9765 (s\n prior to K prefix), 9775 (s\n prior to K prefix), 9785 (s\n prior to K prefix), 9815<\li><li>Compatible with Massey Ferguson tractor models 8245, 8260 (s\n CG198001-CH271003), 8270, 8280, 9240<\li><li>Compatible with Minneapolis Moline tractor models G750, G955, G1350, G1355<\li><li>Compatible with Oliver tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2150, 2155, 2255<\li><li>Compatible with White tractor models 2-62, 2-70, 2-78, 2-85, 2-88, 2-105, 2-110, 2-135, 2-150, 2-155, 2-180, 4-150, 4-175, 4-180, 4-210, 4-225, 4-270, 60 American, 80 American, 100, 120, 125, 140, 145, 160, 185, 195, 6124, 6125, 6144, 6145, 6175, 6195, 6215, 8510, 8610, 8710, 8810<\li><li>Replaces AGCO OEM nos 72160170<\li><li>Replaces OEM nos 160294A, 167985A<\li><li>Used items are not always in stock. If we are unable to ship this part we will contact you within one business day.<\li><\UL>$
Allis Chalmers Rim Clamp, Used - For Allis Chalmers tractor models 9130, 9150, 9170, 9190, 9435, 9455, 9630, 9635, 9650, 9655, 9670, 9675, 9690, 9695, 9755 (s\n prior to K prefix), 9765 (s\n prior to K prefix), 9775 (s\n prior to K prefix), 9785 (s\n prior to K prefix), 9815Compatible with Massey Ferguson tractor models 8245, 8260 (s\n CG198001-CH271003), 8270, 8280, 9240Compatible with Minneapolis Moline tractor models G750, G955, G1350, G1355Compatible with Oliver tractor models 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2150, 2155, 2255Compatible with White tractor models 2-62, 2-70, 2-78, 2-85, 2-88, 2-105, 2-110, 2-135, 2-150, 2-155, 2-180, 4-150, 4-175, 4-180, 4-210, 4-225, 4-270, 60 American, 80 American, 100, 120, 125, 140, 145, 160, 185, 195, 6124, 6125, 6144, 6145, 6175, 6195, 6215, 8510, 8610, 8710, 8810Replaces AGCO OEM nos 72160170Replaces OEM nos 160294A, 167985AUsed items are not always in stock. If we are unable to ship this part we will contact you within one business day. (Item #: 497475) $10.01

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy