Welcome! Please use the navigational links to explore our website.

Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers Tractor PTO


Click here to see parts by model


photo of With coupling. 6 spline, 41.00 inches long. Includes coupling 70218386. For tractor models WD, WD45, WD45D.
Allis Chalmers PTO Shaft
- With coupling. 6 spline, 41.00 inches long. Includes coupling 70218386. For tractor models WD, WD45, WD45D. (Item #: 151041, Ref. 70222663) $221.00

photo of Rear 540 RPM PTO shaft. Length is 41.375 inches. 6 spline on both ends. 1 3\8 inch Diameter Replaces 70229312. For tractor models D-17, 170, 185, 180, 185.
Allis Chalmers PTO Shaft
- Rear 540 RPM PTO shaft. Length is 41.375 inches. 6 spline on both ends. 1 3\8 inch Diameter Replaces 70229312. For tractor models D-17, 170, 185, 180, 185. (Item #: 172874, Ref. 70231938) $318.50

photo of 540\1000 RPM. NOTE: Center mounting ring is 5.750 inches in diameter, with 4 bolt holes inner and outer. For tractor models 170, 175, 180, 185 serial number to 12525, 190, 190XT, 200. Replaces 255802.
Allis Chalmers PTO Shaft
- 540\1000 RPM. NOTE: Center mounting ring is 5.750 inches in diameter, with 4 bolt holes inner and outer. For tractor models 170, 175, 180, 185 serial number to 12525, 190, 190XT, 200. Replaces 255802. (Item #: 108800, Ref. 70255802) $179.00

photo of NOTE: Center mounting ring is 5.750 inches in diameter, with 6 bolt holes inner and outer. 7.875 inches long. For tractor models 175, 180, 7000, 185 serial number 12525>. (8# AI)
Allis Chalmers PTO Shaft
- NOTE: Center mounting ring is 5.750 inches in diameter, with 6 bolt holes inner and outer. 7.875 inches long. For tractor models 175, 180, 7000, 185 serial number 12525>. (8# AI) (Item #: 109341, Ref. 70260704) $229.00

No
Picture
Allis Chalmers PTO Clutch Separator Plate
- This PTO Clutch Separator Plate is for tractor models (180, 185 all use 6), (190, 190XT, 190XT III, 200 all use 8), (4W-220, 7045, 7060, 7080, 7580, 8050, 8070 all use 5), (4W-305, 8550 both use 7), (7000 use 3), (7010, 7020, 7030, 7040, 7050, 8010, 8030 all use 4). (Item #: 172652, Ref. 70265486) $26.80

No
Picture
Allis Chalmers PTO Brake Friction Plate
- For tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, 8550. PTO Brake Friction Plate. (Item #: 70270199) $38.05

No
Picture
Allis Chalmers PTO Shaft
- 540 & 1000 RPM with 6 Mtg. Bolts For 7010, 7020, 7030, 7040, 7045, 7050, 7060, 8010, 8030, 8050 (Item #: 108963, Ref. R2839) $174.00

photo of I.D. 1.125 inch 6 spline Female to O.D. 1.375 inch 6 spline Male, ExtendsL 1.125 inches, Length: 3 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided  for any device intended for installation between the tractor PTO shaft and the implement input driveline .
Allis Chalmers PTO Adapter
- I.D. 1.125 inch 6 spline Female to O.D. 1.375 inch 6 spline Male, ExtendsL 1.125 inches, Length: 3 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline . (Item #: 103190, Ref. PA01) $14.42

photo of Inside diameter 1.375 inch 21 spline female to outside diameter 1.375 inch 6 spline male. Extends: 4.125 inch, length: 6.375 inch. Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided  for any device intended for installation between the tractor PTO shaft and the implement input driveline .
Allis Chalmers PTO Adapter
- Inside diameter 1.375 inch 21 spline female to outside diameter 1.375 inch 6 spline male. Extends: 4.125 inch, length: 6.375 inch. Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline . (Item #: 103188, Ref. PA08) $63.00

photo of I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends: 4.125 inches, Length: 6.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided  for any device intended for installation between the tractor PTO shaft and the implement input driveline .
Allis Chalmers PTO Adapter
- I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends: 4.125 inches, Length: 6.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline . (Item #: 152729, Ref. PA09) $33.76

photo of Extends and increases: 1 1\8  female 6 spline to 1 3\8  male 6 spline. 5 1\2  length. Extends PTO 3 9\16 . Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided  for any device intended for installation between the tractor PTO shaft and the implement input driveline . Also Replaces T353F.
Allis Chalmers PTO Adapter
- Extends and increases: 1 1\8 female 6 spline to 1 3\8 male 6 spline. 5 1\2 length. Extends PTO 3 9\16 . Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline . Also Replaces T353F. (Item #: 103191, Ref. PA04) $19.00

photo of I.D. 1.375 inch 6 spline female to O.D. 1.125 inch 6 spline male, Extends: 2.750 inches, Length: 5.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided  for any device intended for installation between the tractor PTO shaft and the implement input driveline .
Allis Chalmers PTO Adapter
- I.D. 1.375 inch 6 spline female to O.D. 1.125 inch 6 spline male, Extends: 2.750 inches, Length: 5.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline . (Item #: 103192, Ref. PA05) $22.26

photo of I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends PTO Shaft 4.00 inches, Length: 5.75 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided  for any device intended for installation between the tractor PTO shaft and the implement input driveline .
Allis Chalmers PTO Adapter
- I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends PTO Shaft 4.00 inches, Length: 5.75 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline . (Item #: 121311, Ref. PA06) $23.40

photo of I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.125 inches, Length: 5.875 inches, Max HP: 70 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided  for any device intended for installation between the tractor PTO shaft and the implement input driveline .
Allis Chalmers PTO Adapter
- I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.125 inches, Length: 5.875 inches, Max HP: 70 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline . (Item #: PA11) $33.00

photo of I.D. 1.750  20 spline female to O.D. 1.375  6 spline inch male, Extends: 4.625 , Length: 7.50 , Max HP: 100. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided  for any device intended for installation between the tractor PTO shaft and the implement input driveline .
Allis Chalmers PTO Adapter
- I.D. 1.750 20 spline female to O.D. 1.375 6 spline inch male, Extends: 4.625 , Length: 7.50 , Max HP: 100. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline . (Item #: PA12) $64.58

photo of I.D. 1.750 inch 20 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.625 inches, Length: 7.00 inches, Max HP: 100 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided  for any device intended for installation between the tractor PTO shaft and the implement input driveline .
Allis Chalmers PTO Adapter
- I.D. 1.750 inch 20 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.625 inches, Length: 7.00 inches, Max HP: 100 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline . (Item #: 103195, Ref. PA14) $29.26

photo of Override coupler for 1 1\8 inch female to 1 1\8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided  for any device intended for installation between the tractor PTO shaft and the implement input driveline .
Allis Chalmers PTO Overide Clutch
- Override coupler for 1 1\8 inch female to 1 1\8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline . (Item #: 103167, Ref. C690F) $71.00

photo of Override coupler for 1 3\8 inch female to 1 1\8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided  for any device intended for installation between the tractor PTO shaft and the implement input driveline .
Allis Chalmers PTO Overide Clutch
- Override coupler for 1 3\8 inch female to 1 1\8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline . (Item #: 191020, Ref. C680F) $71.01

photo of Override coupler for 1 3\8 inch female to 1 3\8 inch male, 6-Spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided  for any device intended for installation between the tractor PTO shaft and the implement input driveline .
Allis Chalmers PTO Overide Clutch
- Override coupler for 1 3\8 inch female to 1 3\8 inch male, 6-Spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline . (Item #: 103168, Ref. C660F) $39.00

photo of For tractor models WD, WD45. PTO Stub shaft is 6.56 inches long, 6 spline.
Allis Chalmers PTO Stub Shaft
- For tractor models WD, WD45. PTO Stub shaft is 6.56 inches long, 6 spline. (Item #: 172785, Ref. 70224528) $157.50

photo of For tractor models WD, WD45.
Allis Chalmers PTO Shifter Seal
- For tractor models WD, WD45. (Item #: 172783, Ref. 70224642) $7.30

photo of Seal for D10, D12, D14, D15, early WC before serial number 74330, early WF before serial number 1336. 1.375 inch inside diameter x 2.378 inch outside diameter x .312 inch width.
Allis Chalmers PTO Seal
- Seal for D10, D12, D14, D15, early WC before serial number 74330, early WF before serial number 1336. 1.375 inch inside diameter x 2.378 inch outside diameter x .312 inch width. (Item #: 116834, Ref. 359051R91) $8.20

photo of Plastic Knob, 3\8 inch fine thread. For tractor models WC, WF, WD, WD45. Diameter of knob may vary.
Allis Chalmers PTO and Belt Pulley Lever Knob
- Plastic Knob, 3\8 inch fine thread. For tractor models WC, WF, WD, WD45. Diameter of knob may vary. (Item #: 126604, Ref. R4572) $6.06

photo of Plastic Knob, 3\8 inch fine thread. For tractor models 190, 190XT, 200, 210, 220. Diameter of knob may vary.
Allis Chalmers Throttle, Traction Booster, Hydraulic and PTO Levers Knob
- Plastic Knob, 3\8 inch fine thread. For tractor models 190, 190XT, 200, 210, 220. Diameter of knob may vary. (Item #: 126604, Ref. R4572) $6.06

photo of PTO Outer Seal for 1 speed, 1 3\8 inch output shaft. This oil seal measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide For tractor models B, C, CA, D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 190XT III, 200. Replaces: 224810, 230608, 241779, 70224810, 70230608, 70241779
Allis Chalmers PTO and Lift Shaft Housing Seal
- PTO Outer Seal for 1 speed, 1 3\8 inch output shaft. This oil seal measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide For tractor models B, C, CA, D10, D12, D14, D15, D17, D19, 170, 175, 180, 185, 190, 190XT, 190XT III, 200. Replaces: 224810, 230608, 241779, 70224810, 70230608, 70241779 (Item #: 128541, Ref. 70241779) $6.40

photo of This PTO clutch finger kit has 90 degree fingers. (11 inch, 6 Finger). Fits most Fiat built tractors. Models 5040, 5045, 5050, 5060, 6060, 6070. Replaces OEM part number 9959899.
Allis Chalmers PTO Clutch Finger Kit
- This PTO clutch finger kit has 90 degree fingers. (11 inch, 6 Finger). Fits most Fiat built tractors. Models 5040, 5045, 5050, 5060, 6060, 6070. Replaces OEM part number 9959899. (Item #: 179365, Ref. S.62178) $76.00

photo of 1-3\8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run.
Allis Chalmers PTO Safety Clutch, 40 HP
- 1-3\8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref. B9164) $280.00

No
Picture
Allis Chalmers PTO Clutch Drive Plate
- 6 inch outside diameter, 3.625 inch inside diameter, 28 teeth. For tractor models (quantity used): 180 (6), 185 (6), 190 (8), 190XT (8), 190XT III (8), 200 (8), 4W220 (5), 4W305 (7), 7000 (3), 7010 (4), 7020 (4), 7030 (4), 7040 (4), 7045 (5), 7050 (4), 7060 (5), 7080 (5), 7580 (5), 8010 (4), 8030 (4). (Item #: 164440, Ref. 70256524) $28.76

photo of For 540 RPM 6 spline 1 3\8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5\16 - 12 ORB. Outlets 1 1\16 - 12 ORB. Recommended hose sizes 1 1\4 inlet, 3\4 outlet.
Allis Chalmers PTO Mounted Hydraulic Pump
- For 540 RPM 6 spline 1 3\8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5\16 - 12 ORB. Outlets 1 1\16 - 12 ORB. Recommended hose sizes 1 1\4 inlet, 3\4 outlet. (Item #: 120040, Ref. HC-PTO-1A) $1050.00

photo of This PTO shaft Seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: B, C, IB. Replaces: 206538, 230851, 232186, 261733, 261958, 800351, 70206538, 70230851, 70232186, 70261958, 70800351
Allis Chalmers PTO Shaft Seal
- This PTO shaft Seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: B, C, IB. Replaces: 206538, 230851, 232186, 261733, 261958, 800351, 70206538, 70230851, 70232186, 70261958, 70800351 (Item #: 169955, Ref. 471765) $8.96

photo of Part number TX14989 is a new PTO clutch disc. It is used in in dual clutch configurations The rigid disc measures 11 inches with a 1 inch, 10 spline hub. Used on Allis Chalmers models 5040, 5045, 5050, 6060, 6070. This disc also has applications for Long and Fiat tractors. Replaces OEM numbers: TX14989, 128281, 328018616, 3280186161, 5106854, 5145715, 5152710, 5154703, 5154703, 72091671, 5101585, 5085404, 1LUA20.
Allis Chalmers Clutch PTO Disc
- Part number TX14989 is a new PTO clutch disc. It is used in in dual clutch configurations The rigid disc measures 11 inches with a 1 inch, 10 spline hub. Used on Allis Chalmers models 5040, 5045, 5050, 6060, 6070. This disc also has applications for Long and Fiat tractors. Replaces OEM numbers: TX14989, 128281, 328018616, 3280186161, 5106854, 5145715, 5152710, 5154703, 5154703, 72091671, 5101585, 5085404, 1LUA20. (Item #: 122055, Ref. TX14989) $64.00

photo of Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3\8 inch 6 spline (standard 540 RPM PTO) to 5\8 inch round bore with keyway.
Allis Chalmers PTO to Pump Coupling
- Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3\8 inch 6 spline (standard 540 RPM PTO) to 5\8 inch round bore with keyway. (Item #: 183772, Ref. B6691) $46.00

photo of Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3\8 inch 6 spline (standard 540 RPM PTO) to 3\4 inch round bore with 1\4 inch keyway.
Allis Chalmers PTO to Pump Coupling
- Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3\8 inch 6 spline (standard 540 RPM PTO) to 3\4 inch round bore with 1\4 inch keyway. (Item #: 183766, Ref. B2711) $43.50

photo of Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3\8 inch 6 spline (standard 540 RPM PTO) to 7\8 inch round bore with keyway.
Allis Chalmers PTO to Pump Coupling
- Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3\8 inch 6 spline (standard 540 RPM PTO) to 7\8 inch round bore with keyway. (Item #: 183768, Ref. B2712) $43.50

photo of Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3\8 inch 21 spline (standard 1000 RPM PTO) to 3\4 inch round bore with keyway.
Allis Chalmers PTO to Pump Coupling
- Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3\8 inch 21 spline (standard 1000 RPM PTO) to 3\4 inch round bore with keyway. (Item #: 183763, Ref. B2902) $49.00

photo of Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3\8 inch 21 spline (standard 1000 RPM PTO) to 7\8 inch round bore with keyway.
Allis Chalmers PTO to Pump Coupling
- Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3\8 inch 21 spline (standard 1000 RPM PTO) to 7\8 inch round bore with keyway. (Item #: 183764, Ref. B2903) $49.00

photo of The measurements on the bearing are 1-17\32 inches inside diameter, 3-9\64 inches outside diameter. Used on 9130, 9150, 9630, 9635, 9650, 9655. Replaces OEM numbers JD8524, 158363A, 662519R1, 71131910, 88128R, 88128RA, 72161731
Allis Chalmers PTO Output Shaft Bearing
- The measurements on the bearing are 1-17\32 inches inside diameter, 3-9\64 inches outside diameter. Used on 9130, 9150, 9630, 9635, 9650, 9655. Replaces OEM numbers JD8524, 158363A, 662519R1, 71131910, 88128R, 88128RA, 72161731 (Item #: 114890, Ref. 88128R) $14.76

photo of <UL> <li>For Allis Chalmers tractor models WD, WD45<\li> <li>Replaces Allis Chalmers OEM number 70227323, 227323<\li> <li>33 \ 19 Teeth<\li> <\UL>
Allis Chalmers Intermediate PTO Drive Gear
- For Allis Chalmers tractor models WD, WD45 Replaces Allis Chalmers OEM number 70227323, 227323 33 \ 19 Teeth (Item #: 111284) $160.00

photo of <UL> <li>For Allis Chalmers tractor models 6060, 6070<\li> <li>Replaces Allis Chalmers OEM number 500028400, VLD3314<\li> <\UL>
Allis Chalmers PTO Release Bearing
- For Allis Chalmers tractor models 6060, 6070 Replaces Allis Chalmers OEM number 500028400, VLD3314 (Item #: 113753) $48.50

photo of <UL> <li>For Allis Chalmers tractor models WC, WD<\li> <li>Replaces Allis Chalmers OEM number 70203236<\li> <\UL>
Allis Chalmers PTO Idler Gear
- For Allis Chalmers tractor models WC, WD Replaces Allis Chalmers OEM number 70203236 (Item #: 120107) $205.00

photo of <UL> <li>For Allis Chalmers tractor models 5670, 5680, 6680, 6690<\li> <li>Replaces Allis Chalmers OEM number 72221857<\li> <\UL>
Allis Chalmers PTO Shaft, 1000 RPM
- For Allis Chalmers tractor models 5670, 5680, 6680, 6690 Replaces Allis Chalmers OEM number 72221857 (Item #: 155073) $221.00

No
Picture
Allis Chalmers PTO Plate
- For Allis Chalmers tractor model 5040 Replaces Allis Chalmers OEM number 72094507, 72089813 Compatible with Long tractor model 260, 310, 350, 360, 445, 460 Replaces Long OEM number 677249AS Compatible with Oliver tractor model 1250, 1255, 1265, 1270 Replaces Oliver OEM number 30-3052249 Clutch Size: 10 Clutch Hub: 15\16 Clutch Spline: 10 Clutch Center: Solid Clutch Type: Woven For a Remanufactured version of this sku use Item #: 206343 (Item #: 163863) $109.00

photo of <UL> <li>For Allis Chalmers tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070<\li> <li>Replaces Allis Chalmers OEM number 70269732<\li> <li>Inside Diameter: 7.25 <\li> <li>Outside Diameter: 12.74 <\li> <\UL>
Allis Chalmers PTO Plate
- For Allis Chalmers tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070 Replaces Allis Chalmers OEM number 70269732 Inside Diameter: 7.25 Outside Diameter: 12.74 (Item #: 164205) $159.00

photo of <UL> <li>For Allis Chalmers tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 8010, 8030, 8050<\li> <li>Replaces Allis Chalmers OEM number 70269141<\li> <li>Splines: 27<\li> <li>Length: 11.540 <\li> <\UL>
Allis Chalmers PTO Shaft - 1000 RPM
- For Allis Chalmers tractor models 7010, 7020, 7030, 7040, 7045, 7050, 7060, 8010, 8030, 8050 Replaces Allis Chalmers OEM number 70269141 Splines: 27 Length: 11.540 (Item #: 164848) $540.00

photo of <UL> <li>For Allis Chalmers tractor models 9435, 9455 <li>Replaces Allis Chalmers OEM number 3321750M8, 3321750M6<\li> <\li> <li>Compatible with Massey Ferguson tractor models 2640 (s\n K234205-later), 3505, 3525, 3545, 3630, 3645, 3650, 3655, 3660, 3670, 3680, 3690, 8120, 8140, 8150, 8160 <li>Replaces Massey Ferguson OEM number 3321750M6, 3321750M8<\li> <\li> <li>Compatible with White tractor models 6124, 6144<\li> <li>Replaces White OEM number 3321750M8, 3321750M6<\li> <li>Length: 11.543 <\li> <li>Splines: 21 and 24<\li> <\UL>
Allis Chalmers PTO Shaft - 1000RPM
- For Allis Chalmers tractor models 9435, 9455 Replaces Allis Chalmers OEM number 3321750M8, 3321750M6 Compatible with Massey Ferguson tractor models 2640 (s\n K234205-later), 3505, 3525, 3545, 3630, 3645, 3650, 3655, 3660, 3670, 3680, 3690, 8120, 8140, 8150, 8160 Replaces Massey Ferguson OEM number 3321750M6, 3321750M8 Compatible with White tractor models 6124, 6144 Replaces White OEM number 3321750M8, 3321750M6 Length: 11.543 Splines: 21 and 24 (Item #: 167301) $275.00

photo of <UL> <li>For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, 8550<\li> <\UL>
Allis Chalmers PTO Clutch Spring Washer
- For Allis Chalmers tractor models 180, 185, 190, 190XT, 200, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8030, 8050, 8070, 8550 (Item #: 168155) $10.86

No
Picture
Allis Chalmers PTO Housing Seal
- For Allis Chalmers tractor models 8745, 8765 Compatible with Massey Ferguson tractor models 135 (UK), 165 (UK), 240, 253, 263, 265 (s\n 9A349239-later), 270, 275 (s\n 9A349239-later), 290, 298, 360, 362, 365 (s\n B180009-earlier), 375, 383, 390, 390T, 393, 396, 398, 399, 451, 461, 471, 481, 491, 492, 543, 583, 596, 670, 690, 698, 699, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370 Compatible with Massey Ferguson Construction & industrial models 20E, 24, 25, 30E, 30H, 40E, 50E, 50H, 50HX, 60H, 6500H, 6800H Replaces Massey Ferguson OEM number 1870859M1 Compatible with White tractor models 6410, 6510 Replaces manufacturer number VPH5202 O.D.: 5.276 Width: .106 (Item #: 173695) $16.76


Click here to see parts by model







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2022 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy