Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Allis Chalmers Tractor Axle


Click here to see parts by model


photo of Fits G. Replaces: 70800667, 70800902, 800667, 800902. 24-3\8 inches overall length.
Allis Chalmers Rear Axle
- Fits G. Replaces: 70800667, 70800902, 800667, 800902. 24-3\8 inches overall length. (Part No: 70800902)
$193.00

photo of For tractor models B, B125, C, CA, IB. Outside diameter 3.5 inches. Inside diameter 2.5 inches. 7\16 inches thick.
Allis Chalmers Rear Axle Oil Seal
- For tractor models B, B125, C, CA, IB. Outside diameter 3.5 inches. Inside diameter 2.5 inches. 7\16 inches thick. (Part No: 70206450)
$18.27

photo of Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11).
Allis Chalmers Bush Hog Axle Spacer Bushing
- Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: SPB40)
$4.91

photo of Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36
Allis Chalmers Axle Bolt
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

photo of 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36
Allis Chalmers Axle Nuts (5)
- 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

photo of A= 130mm, B= 104mm, C= 49.2mm. For tractor models 8010, 8030, 8050, 8070 all with 4WD.
Allis Chalmers Front Axle Bearing Assembly
- A= 130mm, B= 104mm, C= 49.2mm. For tractor models 8010, 8030, 8050, 8070 all with 4WD. (Part No: 4315375)
$286.07

photo of This rear axle seal measures 3.881 inches outside diameter, sealing a 2.75 inch diameter shaft and is .468 inches wide. For tractor models D10, D12, D14, D15.
Allis Chalmers Rear Axle Seal
- This rear axle seal measures 3.881 inches outside diameter, sealing a 2.75 inch diameter shaft and is .468 inches wide. For tractor models D10, D12, D14, D15. (Part No: 70218284)
$9.48

No
Picture
Allis Chalmers Front Axle Bushing
- For tractor models 160, 170, 185, 9130, 9150, 9170, 9190. (Part No: 72160032)
$22.71

photo of This Outer Axle Seal has a 1.750 inch inside diameter, a 2.690 inch outside diameter and is .500 inch wide. It replaces original part numbers 800166 and 70800166. Two used per tractor. Sold individually.
Allis Chalmers Rear Outer Axle Seal
- This Outer Axle Seal has a 1.750 inch inside diameter, a 2.690 inch outside diameter and is .500 inch wide. It replaces original part numbers 800166 and 70800166. Two used per tractor. Sold individually. (Part No: 70800166)
$12.75

photo of This Rear Axle Bearing has a 1.5748 inch inside diameter a 2.6772 inch outside diameter and is 0.591 inch thick. It is sealed on one side. Fits Allis Chalmers G and replaces original part numbers 800164, 70800164, 70928929.
Allis Chalmers Rear Axle Bearing
- This Rear Axle Bearing has a 1.5748 inch inside diameter a 2.6772 inch outside diameter and is 0.591 inch thick. It is sealed on one side. Fits Allis Chalmers G and replaces original part numbers 800164, 70800164, 70928929. (Part No: 70928929)
$51.50

photo of This inner axle seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: G. Replaces: 206538, 230851, 232186, 261733, 261958, 800351, 70206538, 70230851, 70232186, 70261958, 70800351
Allis Chalmers Inner Axle Seal
- This inner axle seal has a 1.187 inch Inside Diameter, a 2.004 inch Outside Diameter and is 0.25 inch wide. It Fits: G. Replaces: 206538, 230851, 232186, 261733, 261958, 800351, 70206538, 70230851, 70232186, 70261958, 70800351 (Part No: 471765)
$9.50


Click here to see parts by model







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2019 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy