Posted by The tractor vet on February 16, 2012 at 07:11:52 from (76.212.231.208):
In Reply to: Grain drill hauling posted by mkirsch on February 16, 2012 at 06:35:09:
Hauling one can be a challenge . And towing it that far is almost out of the question. Myself i have hauled many grain drills . The way i use to haul them was standing up , if it had a walk board on the back i would remove it and the brackets and place a couple old tires under the box with the tongue pointing to the sky. , If it had press wheels i would either remove or block it up so the press wheels were not touching and chain to the axles and chain the tongue up. Hauling a grain drill with out doing any damage is a feet in rigging and creative thinking . Loading was not and issue along with unloading as at both ends there were loaders with boom poles . So if your buying one off a farm and they do not have a loader that can reach high enough to lift it by the tongue you have your work cut out.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.