Re: Powermatic wood/metal bandsaw
[ View Follow Ups ] [ Post Followup ] [ Return to Tool Talk ]
Posted by john d. on June 12, 1998 at 14:34:58:
In Reply to: Powermatic wood/metal bandsaw posted by Jeff T on June 10, 1998 at 19:53:45:
: I just purchased a Powermatic model 143 bandsaw. It is a 14 inch saw, with 8 speeds, allowing cutting of both wood and metal. This acived with moving the v belt for 4 speeds, and then ther is a high/low transmission. Does anyone know what wt gear oil this is designed for? I also have found an oilcup near the end of the shaft controlling the gear-but it is partially under the ring on the far end of the shaft and cannot be opened far enough to put in any oil. Any ideas about this?. The motor is not original, and someone has added a pipe to make adding gear oil easier, so the oil cup may not be original. : It was built in 1963, so there has been lots of time for modifications We have a Powermatic 143 here at school. The instruction manual says to use SAE 40 oil in the gearbox. Capacity is 1.5 pints. This is a very tough machine.
Follow Ups:
Post a Followup
|