Posted by JML755 on April 14, 2014 at 09:06:54 from (97.78.165.194):
Had some leftover 12x12 ceramic tile from a 2nd house I bought and remodeled. Figured I'd use it to redo the floors in our master bath and main bath at home since there were some cracks in the 4x4 tile (27 yrs old) in both rooms and the material was "BASICALLY FREE" (or at least paid for). Used leftover mortar and grout but had to buy the matching wall trim tile (well that's $100, not bad for 2 new floors).
Got the master bath done, tore out the main bath floor. Tub had some chips in it so decided to replace the tub ($$). That meant ripping the tile off the walls in the tub area. Didn't have enough leftover tile for the walls, so need to get more to match ($$)Well, the shower doors were old, so we might as well replace those ($$$). Need to get durock for the walls($). Oh, oh. Removing the mud base on the walls means the old faucet valve is too long. Need a new valve($$). Need to get a faucet to fit the new valve($$). Plus, the new valve needs to have the copper pipe rerouted. Did you know that 45 deg 1/2" Street elbows are over $2 apiece!? Oh, look, they've got these wall insets you tile over for the soap and shampoo($$). Gonna need new wallpaper or paint to match the new tub tile ($). The counter top is looking kind of shabby now against the new tile, you know granite is the new thing ($$).
You get the picture. That "FREE TILE FLOOR" in the main bath is creeping up over $ 1000. Really have no one to blame but myself but my checkbook kind of wishes I just replaced the cracked floor tiles and patched up the chips in the tub. :(
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.