Things have realy got out of hand on what should have been a simple question. I was around stick welders since about 1957. In 1990 I took a small welding course at the vocational school because it was part of the corse I wanted. Seen the wire welder the first time there, was a mamouth outfit that was only good in a factory setting, not in a home shop but liked the fact it would weld sheat steel. Do not know if it used any gas or not. Only was called a wire welder. I tried to in that class to get the information on how a welder works or what you needed for certain welding jobs, the answer was we cannot give you that information, all we can do is have you run a stick bead. About 93 I found this little welder that I bought, thought it would be good for repair of sheat metal shields and the like on machinery, Could not get it to work so has sat unpluged for close to the 20 years. Do not know if it was that I just did not know how to operate it or if it was a defective unit. Did not know of anybody that knew anything about them that could help me. Never considered it for anything heavier than the sheat metal. In about 97 got first computor and after being on here was hearing talk about wire welders and stick welders, later talk became mig and later tig, Never knew what they were. My orignal question was is mig just a new name for wire or something different and same with tig. If different then what is the differences. One poster said mig and wire are same, onouther said different, a third asked what make and model to be able to tell if could be used either way. I was replying to his question when I posted the welder information. Notice I said it has not been used in years and everybody here saying to get rid of it and buy a new one that I do not need. Have done all my welding with the stick and that welder only runs a rod 5-7 hours per year at most and if that wire welder I have would work it might only get 3-4 hours max per year and for that little time and just the sheat metal like shields on a combine that would crack it makes no sence to spend big money for a different welder. If it would work and the generator would run the welder might be nice to be able to do a tempory field fix to get the piece to the shop for the stick welder that cannot be moved around. So what is mig and what is tig and what do you use on aluminm? Just wanting to know terms.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.