Posted by Rod (NH) on April 26, 2013 at 06:59:13 from (184.61.123.146):
In Reply to: air compressor posted by Steve in VA on April 26, 2013 at 05:37:17:
Two stage and 3000 psig discharge pressure doesn't compute as far as I'm concerned. Are you sure of that? Two stage compressors would generally be limited to discharge pressures of less than a couple of hundred psig to keep the compression ratios per stage down and limit temperatures to avoid damaging materials used. In fact, most two stage units max out at 175 psig rated because of that. Typically, such a high discharge pressure would require several stages - e.g. four or five and the capacity would be in cfh not cfm for any reasonable horsepower input. Very low flow and very high pressure capability would have no use around a farm shop. Best to limit it to the service it was designed for - filling dive tanks.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.