I see that now. I thought over the course of working on this thing I had probed it every which way with an ohm meter. There is nothing between 97 and 98.
I think the code people have moved on. I don't see a problem interrupting L2 at the pressure switch also if that is what you mean. Anyway this is Texas and just about any electrical work goes here. I recently remodeled a house where the homeowner hired an electrician to run a wire for a new kitchen stove some years before. While I was there one leg of the wire went dead and they had me look at it. I found the guy had pulled an aluminum wire tighter than a banjo string through the attic and down in the wall and wired it without a breaker directly to the electric meter. Then someone later on had the bright idea of using wood shavings for insulation in the attic and the wire was buried in it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.