As I see it, there is no such thing as a "standard" chain. There are just many options for what will fit your saw. Chisel, semi-chisel, round chipper, skip-tooth, ripper chain, pro-aggressive, homeowner-almost-safe safety chain, etc. The only factors that involve fitting are the chain pitch, width of groove in bar, and number of drive links. Your saw ought to be .325" pitch and have 78 drive links. Same as many other brand saws use.
If your saw takes .325" chain with 78 links on a 20" bar - I know Lowes and Home Depot have Oregon chains that fit and work fine. May not be exactly whatever sub-type as original but fine just the same. Now - if you're saying your saw has some odd-ball bar that takes an odd number of drive-links - that's a different issue.
I kind of see it like tires on a new car. When they need replacement I suspect most people have no problem replacing with a different brand and tread design - but must use the same size.
I buy most of my chains in the pro-series from Baileys on-line. That being said, I've picked up chains many times at Lowes and Home Depot for my "el-cheapo" saws like my Husqvarna 455 Rancher and Poulan Pros. The plastic Husqvarnas are the cheap homeowner line and often come with weird super-safety chain types which I personally can't stand to use. Murder to sharpen once worn a bit unless the safety bars get ground down.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fire in the Field A hay fire is no laughing matter-well, maybe one was! And a good life-lesson, too. Following World War II many farm boys returned home both older and wiser. One such man was my employer the summer I was sixteen. He was a farmer by birth and a farmer by choice, and like many returning soldiers, he was our silent hero: without medals or decorations, but with a certain ability to survive. It was on his farm that I learned to use the combination hand clutch and brake on a John D
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.