Posted by NCWayne on November 14, 2012 at 08:25:39 from (69.40.232.132):
In Reply to: Good slide hammer posted by Tequila on November 14, 2012 at 08:12:41:
If you look at the expensive ones and the Chinese junk you'll see that the slide part on all of them is all but identical, that being a slide bar and a weight. Personally the one I've got was home made probably 30 years, or more, ago. It's not fancy but it has never let me down. The main thing with any slide hammer is the attachments. The way mine is made it uses a 5/8 fine thread, which is fairly standard, for the attachments to hook to it. With a standard hook up like that I can use off the shelf things like the hooks, etc which is good. Even better is the fact that when I am in the field and need something special I can simply take a 5/8 fine thread nut and use it as an attaching point for whatever I need. This works great when I need something special, like I did the other week, where I had to make one with a metric bolt long enough to get down in a hole and pull a coller out.
Like I said, the slide parts are all going to be pretty close to the same other than the slide might be a bit sloppier on the China ones, etc. Other than that just make sure that the attaching point is standard. From there you can get the name brand attachments from places like OTC, etc.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.