Tool Talk Discussion Board |
Re: Red Face Lincoln SA200 Welder
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by driftin_tumblweed on October 18, 2005 at 22:57:44 from (64.13.48.178):
In Reply to: Red Face Lincoln SA200 Welder posted by Oilfield welder on November 21, 2004 at 20:53:23:
In response to this, if any of you other so called pipey's had even been around, the aluminum face sa 200's were the early one... from 45 to 61. The black face first showed up in 60, to 62, then the red-ies came out in late 62 and ran until 73. the blacks then came back out on the sa 200's, 250's and sae 400 biguns..... then lincoln went to the light aluminum with light grey lincoln color face plates up until 97. all are good machines, but if possible try to stay away from the 81 thru 85 machines... alot of them had copper and aluminum windings in them and they tend to be tempermental, and arent as rebuildable as the full copper models.... I have four of the sa200's and 1 SA 300 classic II diesel... all are good machines. the SA 200's are a '48, a 67, a 72, and a 92... the sa 300 classic is a 90. and as far as leaking oil, all of them do that. if it is burning oil, lap the vavles, you can get all parts from the continental engines web page..... if it is a pre 69 model it will have a continental "L head" F-162, with a FM Magneto... most of these parts can be found at a Massey Fergusson Dealer, as they used the same engines in the MF 35, and MF 77 model tractors. If the model is a post 69 model it will haVE A CONTINENTAL F-163 L SERIES, WHICH IS BASICALL the same, yet it uses a high mount starter , and it uses a breaKERLESS DISTRIBUTOR.... clean the motor and faceplate, get the model #, class #, and serial number and contact B & R welding in NY. they are on ebay... they will have almost evey part for the sa 200's, no matter what year. also check with WELDMART.com in dallas tx. they also have most parts, and a few upgrades.... hope this will help ya out...... Old pipefitters never die... their rods just get shorter and the gaps get wider.... be seein ya Tre'
Follow Ups:
Home
| Forums
Today's Featured Article -
Fire in the Field A hay fire is no laughing matter-well, maybe one was! And a good life-lesson, too. Following World War II many farm boys returned home both older and wiser. One such man was my employer the summer I was sixteen. He was a farmer by birth and a farmer by choice, and like many returning soldiers, he was our silent hero: without medals or decorations, but with a certain ability to survive. It was on his farm that I learned to use the combination hand clutch and brake on a John D
... [Read Article]
Latest Ad:
Super WD9.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|