Tool Talk Discussion Board |
cronacast 211
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ken Hortman on January 23, 2005 at 18:02:20 from (12.215.76.101):
In Reply to: 1928 compresser ,cast part broke. posted by oliverdave on January 14, 2005 at 06:25:19:
“THE CAST IRON PROBLEM SOLVER” Unquestionably the final answer to the most difficult cast iron repair welding. This highly sophisticated alloy allows repairs that were previously impossible. IDENTIFICATION: Printed Electrode, TIG Flagged One End APPLICATION: AC or DC Reverse Polarity CRONACAST 211 SUPERIOR ADVANTAGES: • HIGH TENSILE WELDS IN EVERY TYPE OF CAST IRON, INCLUDING GREY AND MEEHANITE; ALSO PRODUCES EXCELLENT STEEL TO CAST IRON WELDS • CRONAMIG 211 IS FULLY MACHINABLE AND HAS A HIGH ELONGATION FACTOR WHICH POSITIVELY PREVENTS CRACKING • PASS OVER PASS WELDING WITHOUT SLAG REMOVAL BETWEEN PASSES • ALL POSITION WELDING CAN BE DONE WITH CRONAMIG 211 WITH NO DISMANTLING OF EQUIPMENT PARTS TECHNICAL INFORMATION: TENSILE STRENGTH: 70,000 PSI (483 MPa) BRINELL HARDNESS: 185-240 OPERATING PROCEDURES: Use AC or DC reverse polarity. Generally, where a narrow, thin bead is desired a straight polarity application is suggested. APPLICATIONS: • GEAR TEETH • PUMP IMPELLERS • SPROCKETS • CAST IRON TO STEEL • PUMP HOUSINGS • CYLINDER BLOCKS AND HEADS • BEARING HOUSINGS • TRANSMISSION CASES • TURBINES • HYDRAULIC PRESS RAMS CONFIDENTIAL MATERIAL, REPRODUCTION, IN WHOLE OR IN PART, PROHIBITED Printed in U. S. A. (Rev. 7/ 02) PART NO. CW1035 CW1034 CW1033 CW1032 ELECTRODE SIZE 3/32 1/8 5/32 3/16 AMPERAGE 55-95 75-110 120-150 140-175 COMBO PAC . . . . . . . . CW1725 PART NO. CW1901 CW1902 CW1903 SIZES CRONATIG™ 211T 1/16 x 36 3/32 x 36 1/8 x 36 TECHNICAL INFORMATION CRONATRON WELDING SYSTEMS, INC. CRONACAST ™ 211 CRONAMIG 211M-FC CRONATIG ™ 211T PART NO. CW2065 CW2066 CW2057 CW2058 CW2059 SIZES CRONAMIG™ 211M-FC .035 x 10 lbs. .035 x 33 lbs. .045 x 10 lbs. .045 x 33 lbs. .062 x 33 lbs. WE 14 Corporate, Research & Distribution Hdqrs: 6510 Northpark Blvd. Charlotte, NC 28216-2367/ 800-843-0763/ www.cronatronwelding.com
Follow Ups:
Home
| Forums
Today's Featured Article -
Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
Latest Ad:
Super WD9.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|