Tool Talk Discussion Board |
Re: Re: Re: Oxy-Acetylene tank sizes
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Rod (NH) on January 05, 2003 at 09:53:34 from (12.148.160.138):
In Reply to: Re: Re: Oxy-Acetylene tank sizes posted by Don on January 05, 2003 at 06:46:07:
Hi Don, I don't have any listing of a C or C25 cylinder size designation. Are you talking about Carbon Dioxide and 75/25 Argon/Carbon Dioxide mix commonly used in MIG welding? That would be a gas designation rather than a cylinder size designation. These gases would both be in the high pressure cylinder category. They would commonly be supplied in T size high pressure cylinders, as is oxygen. That would be 9-1/4" O.D. x 60" high. This info is from an old (early '80s) Linde (Union Carbide) catalog. Other suppliers may provide these gases in any of the cylinder sizes listed under my post on oxygen cylinders. The cylinder of 75/25 that I have is a T, however the growth of relatively small MIG welders in recent years may have led to supply of these gases in cylinders smaller than the T. Check with a local supplier for availability. The standard full pressure for any of the high pressure gases in a T size cylinder is 2,640 psig. For all the other HP cylinder sizes, the full pressure is 2,200 psig for any gas...with the exception of hydrogen and hydrogen mixtures which is 2,000 psig. These pressures are at a temperature of 70 deg F. That pressure will increase over 70 deg and decrease under 70 deg for the same quantity of contents. By contrast, all the acetylene cylinders have a full pressure of 250 psig, also at 70 deg F. Hope this answers your question, Rod
Follow Ups:
Home
| Forums
Today's Featured Article -
Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
Latest Ad:
Super WD9.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|