Tool Talk Discussion Board |
Re: How to put a ceiling in pole barn?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Scott Green on December 15, 2002 at 06:55:53 from (66.133.135.135):
In Reply to: How to put a ceiling in pole barn? posted by Mike on December 15, 2002 at 03:15:09:
This is something no one thinks about when building a pole barn. "Putting up a ceiling". I know! I did it myself. Put my trusses 5' apart. Afterwards I thought about putting a ceiling in. That's when it hit me. I should have put the trusses 4' apart. Then I would be able to use conventional size building material. I put a drop ceiling in mine , useing 3" insulated ceiling tiles. I went with drop ceiling because of weight. And also because it was free. I got my ceiling panels from a Topps grocery store , which was being remodeled. If I were you , I would put one more truss inbetween the others. Then use drop ceiling panels as I did. It worked out good for me. With one more truss inbetween your existing ones , you should be great. I had to be a little more creative with 5' between my trusses. Here is what you do: Put the "L" chanel all around the perimeter of the building , and also on each side of each truss. Put your "T" bars inbetween your trusses. Drop your panels in. My "T" bars are not even fastened. They just set on the "L" chanel. Everything is pushed tight togather. NOTE: if you use thin ceiling panels , you might also want to add some insulation batts over the top of them. The wind may lift the panels out other wise. I have a couple that try to lift on a windy day , but can't.
Follow Ups:
Home
| Forums
Today's Featured Article -
Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
Super WD9.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|