(800) 853-2651   Cart  View Cart    
Low Prices, Fast Shipping

 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford NAA (Golden Jubilee) Tractor Parts

[ Show Pictures ]

[Show Categories]   [Show all Ford Models]   [Printer Friendly]  


Brakes
Brake Adjusting Hole Cover - For models 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder) all from 1948 to 1964. (Part No: H2092) $7.50

Brake Backing Plate - For 8N, NAA, Jubilee. Brake Backing Plate Restoration Quality, with felt seal. (Part No: 8N2255) $74.28

Brake Backing Plate Felt Seal - For models 8N, NAA, Jubilee. (Part No: 8N2217) $4.70

Brake Backing Plate Support - For 8N and NAA. (Part No: 8N2212B) $77.95

Brake Camshaft Hole Cover Spring - Tractors: 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Part No: 8N2322) $6.48

Brake Cover - Cover, Brake camshaft hole. This is an EXACT reproduction of the ORIGINAL brake cover. For tractors: 8N, NAA (1948 TO 1954). (Part No: 8N2224) $8.44

Brake Cross Shaft Bushing - Measures about 1 inch I.D., 1 1/6 O.D. and 1/2 inch wide. Bushing is a little less than 1/16 thick. Presses into transmission housing. For tractors: LATE 8N, NAA, Jubilee {1949-1954}. (Part No: C0NN2477) $13.28

Brake Drum - For models 8N, NAA, Jubilee. An additional $10.00 will be added to shipping per drum (heavy item). IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 8N1126) $139.40

Brake Drum Repair Kit - For models 8N, NAA Jubilee. Replaces: 8N2027B Contains: Anchor (2), H2041 Adjuster Screw, 8N2217 Felt Backing Plate Seal, 8N2048 Adjuster Socket, 8N2223 Adjuster Nut, 8N2049 Adjuster Spring, 8N2297B Return Spring, 8N2299 Secondary Spring LH only. Brake Hardware Kit for 1 wheel. (Part No: 8NAA2250) $27.95

Brake Shoe Return Spring, RH Brake - For models 8N, NAA, 501, 600, 700, 800, 900, 2000, 4000 series (1948 to 1964). ** Sold in quantities of 2, priced individually. (Part No: NCA2204A) $10.36

Brake Shoes - Complete set of 4. For 8N, NAA, Jubilee. (Part No: 8N2200B) $49.90

Brake Support Plate Stud - This is an EXACT reproduction of the ORIGINAL brake support plate stud. For tractors: 8N, NAA (1948 TO 1953). ** MUST BE ORDERED IN LOTS OF 2, PRICED EACH.** (Part No: 350920S8) $7.36

Parking Brake Lever - For models NAA, Jubilee, 600, 700, 800, 900 all from 1953-1957. (Part No: NAA2782A) $19.90

Clutch
Clutch Alignment Tool - 1-3/8" 10 spline, .67" pilot. For models with single clutch: 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 1112-5996) $8.49

Clutch Disc - 10" Clutch Disc NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900 (4 speed to serial # 14257) - 10 Spline x 1 3/8" Hub - This Is A Retrofit For 9" Clutch, Must Use 10" Pressure Plate. (Part No: NCA7550A) $64.90

Clutch Disc 10 Inch - Clutch Disc, 10 inch Organic, 10 spline on 1.375 inch hub, Spring Loaded. For 1801, 1821, 1841, 2130, NAA, Jubilee, NAA, NAB, 2110, 2120, 2131, 4120, 4121, 4130, 4131, 4140, 541, 601, 620, 621, 630, 631 (Part No: 313299) $94.28

Clutch Disc, New - 9" Clutch Disc, Hub-1 3/8 inch, Splines-10, 6 springs. Fits: 8N, 9N, 2N, NAA (4 speed), NAB, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900 (to serial # 14257), 1800, 2130. Improved from original by added springs. Also replaces NAA7550A. (Part No: 91A7550WHD) $37.93

Clutch Kit, 9 Inch, Single Clutch - Fits 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900. Kit contains 9 inch 10-spline spring drive disc, 9 inch single pressure plate, pilot and release bearings, includes pilot tool. (Part No: 8N7563K) $103.90

Clutch Pedal Arm Bushing - For models 8N, Jubilee, NAA, (1948-1954). This bushing is 1.002" I.D. x 1-1/2" long. Minimum Order Qty is 2. (Part No: 8N7508B) $9.88

Clutch Pedal Shaft Bushing - 7/8 Inch inside diameter. For models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Trans Only). Min order qty is 2. (Part No: 407508A) $8.20

Clutch Release Arm Kit - For 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm Kit contains: eyebolt #355584S8, pin #8N7533, and clutch release arm #8N7511B. (Part No: S.66657) $49.23

Clutch Release Bearing Spring - Two used per tractor, sold individually, .627" O.D., 4.875" overall length and .095" wire diameter. For models 8N, 9N, 2N, NAA, Jubilee, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 900, 901, 940, 941, 1801, 1821, 1841, (2000, 4000 4-cyl), 2030, 2031, 2110, 2111, 2130, 2131, 4030, 4040, 4031, 4110, 4121, 4130, 4131, 4140. (Part No: 9N7562) $6.10

Pilot Bearing - For models 8N, 9N, 2N, NAA, NAB, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: C5NN7600A) $8.90

Pressure Plate - 9" single, flat flywheel. For models 1800, 2130, 8N, 9N, 2N, NAA, NAB, Jubilee, 600, 700, 800, 900 with single clutch. (Part No: 8N7563) $86.78

Pressure Plate, 10 Inch, Single Clutch, New - For models 1800 series, (2000, 4000 4 cyl 1962-64), 2120, 2130, 4120, 4130, 4140, 501, 600, 601, 611, 621, 631, 641, 651, 661, 671, 681, 650, 700, 701, 741, 771, 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, NAA, Jubilee. (Part No: B8NN7563A) $75.00

Release Bearing - For Ford Tractors with 9" and 10" Single Clutch 1939-1964. 2.0625 Inch inside diameter. (Part No: 78-7580A) $23.07

Release Bearing Hub - For models 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 850, 851, 8N, 900, 901, 950, 951, 9N, NAA, Jubilee, NAB. (Part No: 9N7561) $27.58

Cooling System
Fan Belt - Belt is 41 3/8 inches long. For models 8N late (with side mount distributor), NAA (1952-1954, Jubilee. This belt also works with # 8NL10300ALT Alternator conversion kit.) (Part No: 8N8620) $13.20

Fan Blade - 4 Blade - For models 9N, 8N, NAA, Jubilee. Has 4 mounting holes on 3.125" Centers. Diameter is 15.75". (Part No: 8N8600A) $44.00

Fan Blade, 6 Blade - For 9N, 8N, 2N, NAA, Jubilee. 6 Blade Fan for extra cooling in those hotter climates. (Part No: 9N8600D) $102.07

Fan Shroud - For models NAA, Jubilee, 501, 541, 600, 700, 800, 900, 601, 611, 621, 701, 801, 901, 2000, 2110, 2111, 2120, 4000, 4110, 4120, 4121 all before 1965. Fan Shroud, Metal. (Part No: NCA8146A) $60.32

Gasket, Water Pump Mounting - Gasket, Water pump rear to cylinder block. Tractors: all 4-cyl, 1953-1964.NAA, Jubilee, 600, 700, 800, 900. (Part No: EAF8513A) $1.22

Gasket, pump cover plate - FOR: Tractors: all 4-cyl, 1953-1964. Price is for each. (Part No: EAF8507B) $1.62

Radiator - Radiator assembly, 3 rows of tubes, stamped steel inlets & outlets with no cap. Tractors: NAA, 500, 501, 600, 700, 800, 900, 2000, 4000 thru 1964, except HD ind. & fork lift. Also 172", 192" power units. Replaces NCA8005B, C and NDA8005B. Height: 17" Width: 15-1/4" (Part No: C5NN8005ABECON) $216.00

Radiator - Radiator assembly. 3 rows of tubes, cast inlets & outlets with no cap. Tractors: NAA, Jubilee, 500, 501, 600, 601, 641, 700, , 701, 800, 801, 841, 900, 2000, 4000 thru 1964, except HD ind. & fork lift. Also 172", 192" power units. Replaces NCA8005B, C and NDA8005B. Core Height: 17" Core Width: 15-1/4" (Part No: C5NN8005AB) $289.60

Radiator Cap - Cap, radiator, 4 psi. For tractors NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, series with/4cyl gas & diesel (1953 to 1964 except Majors. (Part No: 1T8100A2) $11.40

Radiator Drain Tap - Drain Tap-For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. This is also the same tap for the engine block in the 8N, 9N, 2N, NAA engines. (Part No: C9NN8115A) $3.72

Radiator Hose Clamp, Upper & Lower - EXACT reproduction of the ORIGINAL hose clamp. For models 8N, 9N, 2N (1939-1954), NAA, Jubilee (2 per tractor, 1953-1954). (Part No: 608287) $6.30

Radiator Hose Set - Used with 4 cylinder 134-172 GAS engine. Includes Upper and Lower hose. 312588 Lower & NAA8260B Upper for: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 MANUAL steering only). (Part No: 134-172HOSESET) $10.54

Radiator Hose, Lower - Hose, water pump to radiator lower. Hose is 1 1/2 inch inside diameter. For models 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, Early 8N, 900, 901, 9N, NAA. (Part No: 312588) $6.80

Radiator Hose, Upper - Hose for NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, Series. Can replace 310048. (Part No: NAA8260B) $4.66

Radiator Mounting Pads - Price is for a package of 2 pieces. For models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. (Part No: 180705M1) $5.90

Radiator to Front Support Bolt Kit - For Models: 2000 4 cylinder, 2N, 4000 4 Cylinder, 8N, 9N, Golden Jubilee, Jubilee, NAA, NAB, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 2030, 2031, 2120, 2130, 2131, 4030, 4031, 4120, 4121, 4130, 4131 4 cylinder. Replaces nut 34670, 34090S, Flat Washer 44732, Lock Washer 34808, Carriage Bolt 351655S8. (Part No: 351641S8) $4.95

Thermostat - 160 degree lo-temp, with gasket. For gas engines 1953 to 1964. (Part No: EAF8575BWG) $12.36

Thermostat Housing - For models NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. Gasket available as part # EAF8255A, request in comments section of order form. (Part No: 310031) $44.15

Water Pump - For NAA, Jubilee. Comes with Rear Cover Plate and Gasket. Replaces Part number CDPN8501B. (Part No: S.60663) $43.95

Water Pump Kit - Repair kit. For 8N, 9N, 2N, NAA, Jubilee (Part No: CPN8591B) $49.19

Water Pump Pulley, Single Groove - For models NAA, Jubilee. Single Groove Water Pump Pulley. (Part No: EAF8509A) $27.30

Water Pump Sealant - RTV Blue 3.35 oz. tube. (Part No: PRM77BR) $7.86

Decals and Emblems
Decal Set, Complete - For models NAA, Jubilee. (Part No: R4665) $30.00

Ford Script Painting Mask - Includes 1 smaller 7-1/4" x 1-3/4" and 1 large 9" x 3" painting masks. For models (NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 1953-1957). Application instructions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Part No: S.67163) $18.86

Hood Emblem - For NAA. Just like original Hood Emblem. (Part No: C0NN16600) $47.44

Hood Emblem - Restoration quality with studs and retaining clips. For models NAA (not Jubilee), 501, 601, 701, 801, 861, 901, 1801, 2031, 4030, 4031, 4040, 4140. Chrome, Gold and red. (Part No: 311231) $69.78

Hood Emblem for Jubilee - For Golden Jubilee Model. Just like original (Part No: NAA16600A) $48.18

Drive Train
Axle - Rear Axle 8N, NAA, Jubilee. Total length is 32.25 inches. **$15 ADDED TO SHIPPING DUE TO WEIGHT** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 8N4235C) $156.91

Axle Bearing Assembly - For models 8N, 9N, 2N, NAA, Jubilee. This includes rear axle bearing(2N4221) and cup(9N4222). (Part No: S.18516) $55.52

Axle Kit, Rear - Kit contains 2 rear axle shaft bearings, 2 Rear axle washers, 2 rear axle housing gaskets, 2 rear axle shaft bearing cup, 2 rear axle nut and lock rings, 2 rear axle shaft gaskets, 2 rear axle seals, 2 rear axle outer oil seals, 2 axle housing to center housing gaskets. For models NAA, Jubilee. (Part No: AXLEKIT-NAA) $159.95

Axle Nut - 1.25", 18 hex. For models (8N 1948-1953), (NAA, Jubilee 1953-1955), NAB. (Part No: 8N4179) $9.90

Axle Nut & Snap Ring - Kit, nut & snap ring. For models 8N, NAA. (Part No: CBPN4179A) $10.86

Axle Nut Lock Ring - For 8N 1948-1953, Jubilee & NAA. Snap Ring. Minimum order quantity is 10. Sold In Lots Of 10, priced each. (Part No: 8N4187) $1.92

Axle Nut, Clamp Lock Type - Clamp lock nut, rear axle, 1-1/4". For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Part No: LN10-21) $37.70

Axle Seal, Inner Pair - Seal, Oil For 8N, Jubilee, NAA. Enter QTY 1 For PKG of 2. (Part No: 8N4233A) $9.34

Axle Seal, Outer Pair - For models 8N SN# 486753 UP, NAA, Jubilee. Comes in pairs. 3-3/4" O.D., 2-7/8" I.D. (Part No: D5NN4115A) $13.33

Axle Shaft Bearing - Rear Axle Shaft Bearing, Tapered Cone. (Part No: 2N4221) $46.62

Axle Shaft Gasket - For models 600, 700, 800, 900, 8N, NAA, Jubilee. I.D. 2 inch, O.D. 2 1/4 inch. (Part No: 8N4284) $3.06

Bolt, Differential Ring Gear - 1/2"-20. For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 series all 1953 to 1964. Sold in multiples of 4, priced individually. There are 12 required for ring gear CEPN4210B and 16 required for ring gear CEPN4210C. (Part No: NAA44215A) $7.24

Countershaft - For NAA, Jubilee. Countershaft. (Part No: NAA7111C) $163.03

Differential Gasket Kit - Diff. gasket and o-ring kit. Contains: NAA502A, NAA4036A(2), C5NN747A, NAA4662B, 8N6734, 8N7011, 12-OR(3), 17-OR(3). For Jubilee, NAA. (Part No: DGKNAA) $16.12

Differential Pinion Bearing Cone - For models 2000 1965>, 2N 1939-52, 3000 1965>, 4110 1965>, 600 with 4 SP. TRANS. SN<54165 - 1958, 5 SP. SN<196155 - 1959, 601 with 4 SP. TRANS. SN54166> -1958-62, 5 SP. SN106116> - 1960-64, 8N 1939-52, 9N 1939-52, Dexta 1957-1964, NAA 1953-54. (Part No: BB4221B) $19.33

Differential Pinion Bearing Cup - Bearing cup, differential bearing For 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA (Part No: BB4222) $19.28

Differential Pinion Bearing Cup, Front - For models 2N 1939-52, 8N 1939-52, 9N 1939-52, Dexta 1957-4/1962, NAA, Jubilee 1953-54. (Part No: BB4616B) $37.85

Differential Pinion Cone, Front - Bearing, Tapered Cone. For models 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, Dexta 1957-4/1962, NAA, Jubilee 1953-1954. (Part No: BB4621B) $32.87

Differential Pinion Pilot Bearing - For models 2120 with 4 SP.TRANS. SN54166> -1958-62, 5 SP. SN106116> - 1960-64, 600 with 4 SP.TRANS. SN<54165 - 1958, with 5 SP. SN# <196155 -1959, 601 with 4 SP.TRANS. SN# 54166> -1958-62, 5 SP. SN# 106116> - 1960-64, NAA, Jubilee 1953-1954. (Part No: 81T4625MA2) $121.77

Gasket, Axle housing to center - Gasket center housing to rear axle hsg. Tractors: NAA, 600, 2120, LCG (1953 & up). (Part No: NAA4036A) $1.07

Gasket, Main Drive Gear Bearing Retainer - For models 8N, 9N, 2N, NAA, Jubilee, NAB. SOLD IN QUANTITIES OF 5, PRICE IS FOR 1. (Part No: 9N7086) $1.14

Gear Shift Lever Spring - Fits the tractors with 3 or 4 speed transmission or 4 speed torque converter transmission, 2.210 tall, 1.768 tapers to 1.003 O.D., 0.140 wire diameter. For models NAA, Jubilee, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 900, 901, 940, 941, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 4000, 4030, 4031, 4040, 4110, 4121, 4130, 4131, (4140 4-cyl), 4140. (Part No: 9N7227B) $9.95

Gear Shift Lever, with Knob, 4-Speed Transmission - Replaces NAA7209A and 8N7209C shift levers. This newer version has 5/16" UNF thread for the shift knob (knob included) The early series 3/8 shaft is no longer available. Note: uses gear shift knob BB7213A. Fits: 8N, NAA, Jubilee, 600, 700, 800, 900, 620, 621, 630, 631, 640, 641, 740, 741, 840, 841. (Part No: C5NN7202B) $75.33

Gear Shift Pin - Fits 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000(>1965 (with 3 & 4 Speed transmission). (Part No: 9N7221B) $5.28

Gear, 1st, 4 Speed Transmission - 60/28 tooth. For models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7100) $218.71

Gear, 2nd Transmission Countershaft - Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-64), 8N (1948-52). 17 teeth. (Part No: B9NN7114A) $106.26

Gear, 3rd, 4 Speed Transmission - 52 tooth. For models 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, NAA, NAB. All with 4 speed transmissions. (Part No: 8N7102) $199.64

Gear, 4th, 4 Speed Transmission - Has 28 & 36 teeth. For models 1801, 2000, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7112) $215.15

Gear, Mainshaft 2nd - Transmission mainshaft 2nd gear. 56 teeth. For NAA, Jubilee, all 4-speed Ford transmissions (1955-64), 8N, 4-speed transmission, 1948-52. (Part No: B9NN7A381B) $110.92

Gears, 2nd Mainshaft & Countershaft, 4 Speed Transmission - For 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 cyl engines & 4 speed transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Part No: B9NN7A381B-set) $162.08

Hub - Rear Axle Hub 8N, NAA, Jubilee. With Studs. (Part No: 8N1171) $69.06

Main Shaft Connecting Coupling - For models 2000, 3000, 8N, NAA, Jubilee all with 4 Speed Transmission. Main Shaft Connecting Coupling has 21 teeth, 16 spline. (Part No: E6NN7106AA) $57.91

Oil Seal, Main Drive Gear - Oil Seal For 3 & 4 Speed transmission Main Drive Gear on: 8N, 9N, 2N, 600, 700, 800, 900, NAA, NAB, Jubilee. **Minimum order qty is 2** (Part No: 8N7052A) $7.60

Shift Cover Plate Gasket - For 4-SPEED transmissions. For models 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Sold in lots of 5, priced each. (Part No: 8N7223) $2.10

Shift Knob - Knob, transmission gear-shift lever. For all 4- & 5- speed transmission models (1950-1964 SN# 252844 & up). (Part No: BB7213A) $6.50

Shifter Boot - Transmission gear shift lever boot. For tractors: 8N, 9N, 2N, NAA. Bottom hole is 1-1/2" diameter. (Part No: 8N7277) $12.22

Transmission Bearing Cone - Main drive shaft & countershaft bearing cone for 3 & 4 speed transmissions. For models 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7066) $8.53

Transmission Bearing Cup - Main drive shaft & countershaft bearing cup for 3 & 4 speed transmissions. For models 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7067) $13.32

Transmission Drain Plug - Has 2.5" outside diameter. For tractors: 8N, 9N, 2N, NAA, {1939-1954}. Also filler plug for tractor:NAA {1953-1954}. Gasket available, order part number 8N7011. (Part No: 9N7010) $15.42

Transmission Rebuild Kit - For NAA (Golden Jubilee) 1953-54. This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. (Part No: TSBK5354) $110.46

Electrical System
12 Volt Conversion Kit - 12 Volt Conversion Kit - NAA, Jubilee. Includes rebuilt unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness, resistor and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not contain coil. (Part No: NAA10300ALT) $133.65

Alternator Adjustable Arm - Alternator adjusting arm. For alternator conversion on the following tractors (1953-1964): NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. (Part No: NAA10303) $19.99

Alternator Base Bracket Kit - Universal - Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. Can be used with our 8NE10305SE Alternator. (Part No: 2348258) $39.25

Alternator Bracket, Base - Base alternator bracket. For NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 2000, 4000. (Part No: NAA10302) $27.99

Alternator Pulley - For 8N, 9N, 2N, NAA, 600, 700, 800, 900, all using 12 Volt conversion kits with a Delco single wire alternator. Pullery, single groove 5/8" wide and 2 1/4 Diameter. (Part No: 98NAA5825) $28.50

Battery Cable - Switch to starter cable, 14-1/2 inches long. For 600, 700, 800, 900, NAA. Replaces FAA14431B. (Part No: 9N14431B) $13.24

Battery Cable - For 8N 1948-52, Jubilee, (NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, all 1953 and later. Ground Strap. 6 volt, 11" long. (Part No: FAE14301B) $14.66

Battery Cable - For NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, all 1953 and up. Cable. 9" long. (Part No: D1NN14300G) $11.76

Battery Cable Cover - Rubber cover, battery cable to starter solenoid. For tractors: 8N, Jubilee, NAA {1948-1953}. (Part No: 86H14321A) $23.90

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix 'Flame Thrower' heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $33.48

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Not for 9N, 2N early 8N using front mount distributors) (Part No: 40011) $33.48

Condenser - For NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964). (Part No: FET12300A) $4.74

Distributor - With Slotted Drive Shaft. For models NAA, Jubilee. Comes with cap, rotor, dust cover, points, condenser, etc, and ready to drop in. (Part No: FAC1212D) $199.00

Distributor Cap, Clip Held - Fits Tractors: 8N SN# 263844(Side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 Series (4 Cylinder) (Part No: NCA12106A) $10.44

Distributor Driven Gear - For models NAA, Jubilee, 600, 800, 900, 2000, 4000. All 4 Cylinder. (Part No: FAD12390A) $42.75

Distributor Dust Cap - Fits 4-cylinder gas engines on (1950-1964): 8N Side mount distributor, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 (Part No: FAA12239A) $5.90

Distributor Point Set, 4-Cylinder - For FDN12127A & 311185 distributor used on NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964). (Part No: D8NN12171AA) $5.76

Distributor, Breaker Plate - 4 Cylinder. Breaker plate with points & condensor. For NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964). (Part No: FAD12152A) $34.20

Electronic Ignition Conversion Kit - 6V Negative Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series) 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt negative ground only. (Part No: 1244AN6) $91.28

Electronic Ignition Conversion Kit, 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor), NAA, Jubilee, (501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1244A) $82.73

Electronic Ignition Conversion Kit, 12V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt positive ground only. (Part No: 1244AP12) $91.28

Electronic Ignition Conversion Kit, 6V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6) $91.28

Generator Brush - For 6 volt generators on models: 600, 700, 800, 900, NAA. (Part No: FAA10069A) $16.94

Generator, 6 Volt without Pulley - For models NAA, Jubilee, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 500, 600, 700, 800, 900. Add additional core charge of $40.00. If ordering on line, this charge will be added to your order after it is received. (Part No: C4NN10002A) $256.92

Ignition Kit - 4 Cylinder - Ignition kit, less rotor. Contains points, gauge, and condenser. For models 1950 to 1964. For 2000, 4000, 600, 6000, 6100, 700, 800, 8N (late), 900, NAA (Part No: ATK7FA) $9.72

Ignition Kit With Rotor - 4 Cylinder - Ignition kit contains: points, rotor, condensor. For 8N (LATE - with side mounted distributor), NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. For models from 1950 to 1964 (4 Cylinder). Also for TISCO 8N12127-WCR distribution. (Part No: ATK7FAR) $11.86

Ignition Tune Up Kit, Basic, 4-Cylinder Gas - For models NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL <1964). Tune Up Kit, Autolite. Kit contains: D8NN12171AA Point Set, FET12300A Condenser, CONN12200A Rotor & Spark Plugs. (Part No: 309787) $15.54

Ignition Tune Up Kit, Comprehensive - For 8N (SN# 263844 & up), NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000, 1950 thru 1964. (4 Cylinder Gas Engines). Comprehensive Tune-Up Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, and spark plugs. (For use with original equipment distributors). (Part No: TUNEKIT) $40.09

Ignition Tune-Up Kit And Maintenance Kit - For 8N (SN# 263844 & up), NAA, Jubilee (4 Cylinder Gas Engine). Comprehensive Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, Spark plugs, Oil Filter APN6731B, Fuel Sediment Bowl Assembly, and Fuel Filter, In-Line, 5/16 inch . (Part No: TUNEMAINT8N) $70.81

Key Switch - For all Fords 1939 through 1964 except Dexta and Fordson Major with 3/4 inch hole. Keyed Ignition Switch comes with 2 keys (Part No: 8N3679C) $8.84

Rotor Clip - For models (8N SN# 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with side mounted distributor. (Part No: 8N12213) $4.84

Rotor, Side Mount Distributor - 4-Cylinder. Fits the following gas tractors up to 1964: 8N with side mount distributor, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: C0NN12200A) $3.88

Rubber Grommet - Rubber grommet, starter switch wire {goes on lower left side of instrument panel}. Tractors: 8N, NAA {1948-1952}. (Part No: 11A14605) $4.86

Spark Plug - For 8N, 9N, 2N, NAA, NAB, Jubilee, and 134 & 172 gas engines used on: 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981), (2000, 4000 ALL before 1964). SPARK PLUG. Price is for EACH. Minimum Order is 4. (Part No: AL437) $3.10

Spark Plug Wire Set, Custom, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259CUSTOM) $18.00

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259) $17.22

Starter - Starter, less drive, special Delco option- DOES NOT LOOK LIKE ORIGINAL. For Jubilee, 2000, 4000, 501, 600, 700, 800, 900, NAA (Part No: C3NF11002RXLD) $155.47

Starter - Starter, less drive. For models 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: C3NF11002RXL) $138.06

Starter - 6 volt, WITHOUT drive, clockwise rotation. For models (NAA 1952-54 with 134 4 cyl. gas), (501, 601 series 1957-62 with 134 4 cyl. gas), (640, 660, 740 1954-57 with 134 4 cyl. gas), (641, 651, 681 1957-62 with 134 4 cyl. gas), (701 series 1962-68 with 134 4 cyl. gas), (801, 901 series 1962-68 172 4 cyl. gas), (841, 851, 881 1957-62 with 172 4 cyl. gas), (850, 860, 960 1954-57 with 172 4 cyl. gas), (4000LCG, 4030, 4040 1961-64 with 3-201 diesel). Replaces FAC11002, C3NF1100D. (Part No: SFD0047) $102.53

Starter Boot - Rubber cover, starter control wire terminal {goes on wire to solenoid}. For tractors: 8N, Jubilee, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N11115) $15.80

Starter Boot - Rubber cover, starter switch terminal cover. Tractors {1948-1958}. (Part No: 8N11113) $6.95

Starter Drive - Drive assembly. For models 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: C1AF11350A) $30.98

Starter Relay Assembly 6-Volt - For NAA, Jubilee, 600, 700, 800, 900, all 1953-1957. Relay Assembly, 6 Volt, 3 Terminal. (Part No: NCA11450A) $8.85

Starter Repair Kit - For OEM Starter FAC-1102N on NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 6000, Major, Super Major, Dexta, all 4 cylinder gas or diesel 1953-1964. (Part No: SRK403) $21.74

Starter Solenoid, 12-Volt - Relay Assembly, 12 Volt, 4 Terminal. For most 12 Volt GAS Models 1958-1964 including: Jubilee, 501, 541, 600, 601, 611, 620, 621, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB, 2000, 2030, 2031, 2110, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4140. Replaces 311007FR. (Part No: 311006) $12.72

Starter Switch - With mounting gasket. Fits: 8N (1948-1952);all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. (Part No: 8N11500WG) $20.95

Starter w/ Drive - 12 Volt - For NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 all pre 1965 and Gas only. Starter with Drive replaces D8NN11350CA. (Part No: S.66630) $129.90

Starter with Drive, 6 Volt - For NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 all pre 1965 and Gas only. Starter with Drive replaces D8NN11350CA. (Part No: S.66619) $146.64

Terminal Block - For models 8N 1950-52, Jubilee, NAA, (2000, 4000 up to 1964), 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 8NNN14448A) $11.90

Voltage Regulator - Voltage regulator, 12-volt. For models NAA, Jubilee. (Part No: 8NE10307) $44.85

Voltage Regulator, 12 Volt - For models (NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 901, 2000, 4000 Jubilee all 1958-1964. (Part No: C0NF10505A) $57.98

Voltage Regulator, 6 Volt - 6 volt positive ground for 1953-1964 GAS engine tractors: NAA, Jubilee, 1800, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981 (Part No: FAG10505A) $24.95

Wiring Harness - Fits NAA & Jubilee (1953 to 1954). Ignition harness only. (Part No: FAF14401B) $23.90

Wiring Harness, 12 Volt Conversion - For models NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, all 1953-64. (Part No: NAA10301) $26.13

Wiring Harness, Restoration Quality - Complete wiring harness including light wires and a diagram, 6 Volt. Original style braiding with soldered terminals. Made in the USA. For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 gas 1953-1957. NOTE: if you have a fuel gauge you will need to reuse gauge and sending unit wires. Replaces FDN14401B & FAF14401B. (Part No: FDN14401B-OE) $182.50

Engine Bearings
Main Bearing Set, 134, 144, 172 Engines, .010 - For 134 144 & 172 4-cylinder GAS or Diesel engines.(.010 Size). 1 kit used per engine. Contains center, front, and rear bearings. For models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-010) $50.61

Main Bearing Set, 134, 144, 172 Engines, .020 - For 134, 144 & 172 4-cylinder GAS or Diesel engines(.020 Size). 1 kit used per engine. Contains center, front, and rear bearings. For models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-020) $52.91

Main Bearing Set, 134, 144, 172 Engines, .030 - For 134, 144 & 172 4-cylinder GAS or Diesel engines.(.030 Size). 1 kit used per engine. Contains center, front, and rear bearings. For models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-030) $48.67

Main Bearing Set, 134, 144, 172 Engines, .040 - For 134, 144 & 172 4-cylinder GAS or Diesel engines. (.040 Size). 1 kit used per engine. Contains center, front, and rear bearings. For models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-040) $55.26

Main Bearing Set, 134, 144, 172 Engines, STD - For 134, 144 & 172 4-cylinder GAS or Diesel engines. (STD Size). 1 kit used per engine. Contains center, front, and rear bearings. For models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: MBK134172-STD) $50.61

Rod Bearing Pair, .001 - Four required per engine. For 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. ROD Bearing Pair. Must be ordered in multiples of 4. Price is each. (Part No: 312101-PAIR) $17.52

Rod Bearing Pair, .002 - For models 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. ROD Bearing Pair. Must be ordered in multiples of 4. Price is each. (Part No: 312102-PAIR) $13.83

Rod Bearing Pair, .010 - For models 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Must be ordered in multiples of 4. Price is each. (Part No: 312103-PAIR) $12.76

Rod Bearing Pair, .020 - For models 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Must be ordered in multiples of 4. Price is each. (Part No: 312104-PAIR) $11.28

Rod Bearing Pair, .030 - For models 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Minimum order is 4. Priced each. (Part No: C0NN6211B-PAIR) $13.54

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .010 - For 134 & 172 4-cylinder GAS or Diesel and 144 diesel engines, (.010 size). 1 kit used per engine. For models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312103-010) $38.24

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .020 - For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.020 size). 1 kit used per engine. For models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312104-020) $37.16

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .030 - For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.030 size). 1 kit used per engine. For models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312026-030) $38.24

Rod Bearing Set, 134, 144 and 172 Gas or Diesel, STD - With journals measuring 2.298 inches. For 134 & 172 4-cylinder GAS or Diesel and 144 diesel engines, (STD size). 1 kit used per engine. For models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312026-STD) $33.68

Engine Gaskets
Crankshaft Seal, Front - For models 2000 before 1964, 500, 600, 700, NAA (Part No: EAA6700B) $6.57

Crankshaft Seal, Rear - Comes in Halves. 2 needed for complete seal. Min order qty is 2. Fits 134 CID, 172 CID gas & 175 CID diesel engines. For models 2000 up to 1964, 4000 1962 - 1964, 500, 600 Series, 700 Series, 800 Series 1955 - 1957, 801 Series 1958 - 1962, 900 Series 1955 - 1957, 901 Series 1958 - 1962, NAA, Jubilee. ***Minimum order = 2*** (Part No: C0NN6701A) $7.92

Head Gasket 134/172 Gas - Head gasket, non-metallic with 1/2" head bolt holes. For models NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Part No: E9JL6051AA) $31.40

Head Gasket, 134CID Gas Engines - Head gasket, metal clad with 7/16 head bolt holes. For 600, 620, 630, 640, 650, 660, 700, 740, 750, NAA, Jubilee, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 2000, 4000 with 134 gas engines. (Part No: EAE6051DM) $19.86

Main Bearing Cap Packing Material, V-Style - For 134 CID Gas in NAA, Jubilee. Price is for each. **MINIMUM ORDER QTY IS 2. Must be ordered in quantities of 2. (Part No: B3NN6336A) $3.72

Oil Pan Gasket - Fits 134 gas and 172 gas/diesel engines in : NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Part No: EAF6710B) $6.64

Overhaul Gasket Set - Full Overhaul Gasket Set witch Crankshaft Seals for NAA, Jubilee, 600, 700 - 134" Gas Engine (Head gasket for 7/16 head bolts)(1953-1957) (Part No: CPN6008HM) $43.01

Overhaul Gasket Set Less Head Gasket 134/172 Gas - Comes with rear main seal. For models NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. Does NOT include Head Gasket. (Part No: CPN-FPN) $40.49

Seal - Hydraulic pump shaft oil seal. I.D. 0.9350, O.D. 2.004, W. 0.5315. For 2000, 4000, 600, 700, 800, 900, NAA (Part No: C5NN851A) $3.66

Timing Gear Front Cover Gasket - For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. All gas or diesel 1953 to 1964. (Part No: EAF6020B) $2.90

Upper Engine Gasket Set - Metal head gasket with 7/16" bolt holes. For tractors: NAA, Jubilee, 600, 700; 134 CID engine (1953-1957). (Part No: VGCPNM) $24.95

Engine Rebuild Kits
Basic Engine Overhaul Kit, 134 CID Gas, Overbore - Made by TISCO. Super power 3.5 overbore Kit, Kit includes sleeve & piston set, pin bushings, rings, retainers, head gasket. Bearings must be ordered separately. For the following tractors using 134 CID 4 cylinder gas engine (1953-1957): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 2000. (Part No: BEKF110M-LCB) $404.45

Basic Engine Overhaul Kit, 134 Gas - Made by TISCO. 134 CID 4 cylinder gas 3 7/16 kit with metal head gasket. Contains, sleeves, pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings are available, must be ordered separately. For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700. (Part No: BEKF114AM-LCB) $314.18

Engine Overhaul Kit with New Crankshaft - Comprehensive Kit For the 134 cu. inch Gas Engine with 3.4375" bore, 7/16" Head Studs.Tractors 1953 to 1957. Includes - Pistons, Wrist Pin Bushes, Piston Rings, Liners, Con Rod Bearings, Top & Bottom Gasket Sets PLUS - Main Bearings, Thrust Washers, Front & Rear Seals. kit INCLUDES NEW CRANKSHAFT. For models NAA, 600, 700. (Part No: EKMC123) $806.49

Engine Overhaul Kit, 134 Gas - Made by TISCO. Overhaul Kit less bearings for 134 gas engine in NAA, Jubilee, 501, 600, 700, 701, . Also fits 134 engines in 2000 (1953 thru 1964) that were sleeveless (provided block is bored). 134" Gas Engine with 3-ring Pistons, 3-7/16" standard bore. Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set), Gasket Set, Connecting Rod Bushings. Intake & Exhaust Valves (plus guides, locks and springs). Order Engine Bearings separately. (Part No: EOK114-LCB) $449.79

Engine Overhaul Kit, 134 Gas - Made by TISCO. 134 CID 4 cylinder gas 3-7/16" standard bore with slotted drive. Complete Overhaul Kit For NAA, Jubilee, Contains complete gasket set, standard camshaft timing gear, intake and exhaust valves with guides, locks and springs, oil filter, upper radiator hose, lower radiator hose, air cleaner-to-carb hose, sleeve & piston kit, oil pump kit, fan belt, carburetor repair kit, spark plug set, point set and condenser. Bearings are available, must be ordered separately. (Part No: NAAK-LCB) $532.93

In Frame Overhaul Kit, 134 GAS - Made by TISCO. For NAA, Jublee, 600, 700, all with 134 CID 4 cylinder gas engine 1953-57. Includes: Super power set 3 1/2" overbore PK110 sleeve and piston kit with rings, pins, and retainers, VGCPNM upper gasket set with head gasket, EAF6710B crankcase oil pan gasket. (Part No: BIFF110M) $409.73

In-Frame Engine Kit, 134 Gas - Made by TISCO. For NAA, Jubilee, 600, 700, all with 134 CID 4 cylinder gas engine 1953-57, 3-7/16" standard bore. Includes: CPN6055A sleeve and piston kit with rings, pins, and retainers, VGCPNM upper gasket set with head gasket, EAF6710B crankcase oil pan gasket. (Part No: BIFF114AM) $312.70

Overhaul Kit, 134 Gas - Made by TISCO. Complete Overhaul Kit for 134 gas engine in NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 701, . Also fits 134 engines in 2000 (1953 thru 1964) that were sleeveless (provided block is bored). 134" Gas Engine with 3-ring Pistons, 3-7/16" standard bore. Contains Sleeve & Piston Kit (sleeves, pistons, pins, retainers, top chrome & oil control ring set), Gasket Set, Connecting Rod Bushings, Main & Rod Bearings. Intake & Exhaust Valves (plus guides, locks and springs). Available with Std, .010, .020 or.030 Engine bearings. (Part No: EOK114) $456.24

Valve Service Kit - Made by TISCO. For Servicing one engine with valve related parts when only valve refacing is required. Kit contains: Springs, Key and Guides. (Gasket set VGCPNM must be ordered separately) For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 TO 1964) (Part No: VSKF134G) $57.58

Valve Train Kit, 134 CID Gas - For Servicing one engine when valve replacement is necessary. Kit contains: Valves, springs, keys and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, (1953 TO 1964) (Part No: VOKF134G) $118.52

Engine Parts
Camshaft Hydraulic Pump Drive Gear - For models 2000, 4000, 600, 700, 800, 900, NAA, Jubilee, all with 134 gas or 172 diesel engines. Camshaft Hydraulic Pump Drive Gear. Has 33 Teeth. Also replaces 500010. This is NOT a Camshaft Timing Gear (See P/N S.61044). (Part No: EAF907B) $56.60

Camshaft Kit, Refaced Camshaft and Lifters - Fits the following tractors up to 1965 using 134 or 172 gas 4 cylinder engines that Use a pressed on cam gear.: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000. Order S.61044 press on cam gear if needed. CALL FOR AVAILABILITY. You may receive a New camshaft if remanufactured is not available. (Part No: 734145) $259.74

Camshaft, New - Lock Ring Gear Type and uses press on timing gear. For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900, 2000, 4000 all with 4 cyl. gas engines. (Part No: C0NN6251A) $175.02

Camshaft, Reground - Bolt on gear type. For models NAA, 600, 700, 800, 900, 2000, 4000 all with 4 cyl. gas engines and casting C0NN6251. (Part No: R1188903) $151.47

Connecting Rod, Reconditioned, with Bushing - Must match casting number EAA6205. Fits all gas Tractors with GASOLINE 134 or 172CID Engines. NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 all. Reconditioned Piston Rod with Bushing. No core charge. (Part No: 1201599) $103.54

Crankshaft - For NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all with 4 cylinder Gas engines prior 1965. Crankshaft, New, Not Reground. (Part No: D1NL6303D) $482.49

Crankshaft, 4cyl Gas - Fits 4 cylinder GAS 134 CID & 172 CID engines on: NAA, Jubilee, 600, 620, 630, 640, 641, 650, 660, 601, 611, 621, 631, 641, 651, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: D1NL6303D) $482.49

Cylinder Head, NEW - For 134 and 172 CID engine, Cylinder head has 1/2" dia. head bolt holes. Bushings are included for use with 7/16" dia. head bolts. When block has 1/2" dia. head bolt threads, do not use the bushings. For models 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, Jubilee. Does not include valves, springs or guides. (Part No: D3JL6049B) $839.58

Govenor Compensating Spring and End Assembly - 3 Pieces. Replaces NCA 99810A. For Jubilee, NAA thru 960 1953-1958 4 cylinder gas and used with our part # FDS1278 spring and end assembly. For 501 thru 4140 4 cylinder gas and LP 1958-64 with engine SN# 26402 and up. (Part No: FDS1278) $19.95

Governor Compensating Spring - Mounts between bellcrank and underneath battery tray. For models NAA, Jubilee. (Part No: NAA9827B) $5.75

Governor Shaft Oil Seal - Governor shaft oil seal, for 134 & 172 CID gas engines. Tractors: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 (1953 to 1964). (Part No: EAF18183B) $8.76

Lifter - Valve lifter fits 134, 144, & 172 Gas & Diesel Engines. For Models: NAA, Jubilee, 1801, 2000, 2100, 4000, 501, 600, 620, 630, 640, 650, 660, 601, 611. 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: F3JL6500AA) $16.00

Piston Pin Bushing - Sold in multiples of 4, priced individually. For models NAA, Jubilee, (2000 prior to 1964), 500, 600, 700, (4000 gas from 1962-64), (800, 900 1955-57), (801, 901 gas 1958-62). (Part No: EAA6207A) $4.42

Push Rod, 5/16" Diameter - If replacing 1/4" O.D. pushrod, must also order #87801302 rocker adjusting screw (not available from YT). For model s:[2000 4 cylinder, 4000 4 Cylinder (gas, LP & diesel)], [Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 6000, 6100 (gas, LP & diesel; 4-cylinder)]; Replaces: 500356, C0AE6565C, EBP6565B, EAA6565C. (Part No: 500356) $7.88

Starter Flywheel Ring Gear - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. (Part No: 9N6384) $35.48

Timing Gear Set - Standard Press on Cam timing gear set also includes (EAF6306B) crankshaft gear fits, 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-64, 4000 <1964, 500, 600, 700, 800, 800 1955-57, 801 DIESEL 1964, 801 GAS 1958-62, 900, 900 1955-57, 901 DIESEL 1964, 901 GAS 1958-62, NAA, 500, Jubilee. (Part No: EAF6256MSTD) $85.35

Timing Gear, STD - Standard steel camshaft gear. For models 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-64, 4000 <1964, 500, 600, 700, 800, 800 1955-57, 801 DIESEL 1964, 801 GAS 1958-62, 900, 900 1955-57, 901 DIESEL 1964, 901 GAS 1958-62, NAA, 500, Jubilee. (Part No: EAF6256M) $65.68

Valve, Exhaust, 172 CID Gas - Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. Sold in quantities of 4, price is for 1. (Part No: EAF6505D) $15.22

Valve, Intake, 172 CID Gas - Intake valve for 172 CID Gas engine. Uses 7HA6518 lock. NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. Must order in quantities of 4, price is for 1. (Part No: EBU6507A) $11.02

Engine Pistons and Sleeves
Piston, .020 Overbore, 134 CID Gas Engine - Overbore.020 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108H) $45.68

Piston, .030 Overbore, 134 CID Gas Engine - Overbore.030 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108J) $47.20

Piston, .040 Overbore, 134 CID Gas Engine - Overbore.040 3-ring piston (Rings NOT included) with pin & locks. Note: Bore sleeveless engines when installing oversize pistons & rings. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108K) $44.25

Piston, Standard, 134 CID Gas Engine - Standard 3-ring piston (Rings NOT included) with pin & locks. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 4000. (Part No: EAE6108F) $32.79

Sleeve - Standard sleeve for 134 CID gas engine. For models 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, NAA, Jubilee, 2000. (Part No: EAE6055E) $28.53

Sleeve - Prefinished standard sleeve, hand pressure installed. Used in sleeve & piston kit CPN6055B. For 2000 SERIES, 501, 600, 700, NAA, Jubilee. (Part No: B3NN6055A) $27.72

Sleeve & Piston Kit - 134 Gas - Super Power Set - For 134 CID Gas engine. 3-1/2" overbore for increased power, authothermic pistons, chrome top rings, chrome steel segment oil rings. For 2000, 501, 600, 601, 700, 701, NAA, Jubilee. (Part No: PK110) $383.62

Sleeve and Piston Kit, 134 Gas, STD - For NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 2000 all with 134 CID Gas, 4 Cylinder 1953-1964, Standard bore. Also for 2000 using 134 CID Gas, 4 Cylinder 1962-1964, that were sleeveless (provided block is bored). Sleeve and Piston Kit contains pistons, sleeves, piston rings, piston pins & retainers. (Part No: PK14G1) $220.09

Engine Rings
Piston Ring Set - For 2000, 501, 600, 700, NAA. 3.5 inch bore, 2 Compression @ 3/32, 1 Oil @ 3/16. Set for 1 engine. (Part No: PRS110) $32.54

Piston Ring Set, 134 Gas, .020 - Overbore 3-ring set cast iron. Complete set for 1 engine. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7/16 inch bore 134 gas engine. .020 oversize set has 2 compression rings at 3/32" and oil ring at 3/16" (Part No: CPN6149H) $44.75

Piston Ring Set, 134 Gas, .030 - Complete Overbore 3-ring set cast iron. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7/16 inch bore 134 gas engine. .030 oversize set has 2 compression rings at 3/32" and oil ring at 3/16" (Part No: EAE6149B) $40.76

Piston Ring Set, 134 Gas, STD - Standard 3-ring set cast iron. Complete set for 1 engine. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7/16 inch bore 134 gas engine. 2 compression rings at 3/32 and oil ring at 3/16. (Part No: CPN6149B) $37.68

Piston Ring Set, 134 Gas, STD, Chrome Top Ring - Standard 3-ring set with Chrome Top Ring. Complete set for 1 engine. For 2000, 600, 601, 700, 701, NAA, Jubilee, all with 3 7/16 inch bore 134 gas engine. 2 compression rings at 3/32 and oil ring at 3/16. (Part No: EAE6149A) $43.92

Exhaust System
Elbow to Exhaust Manifold Gasket - Fits 134 CID gas engines 1953-1964 on Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771 and 172 CID gas engines 1955-57 on Models: 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Use with elbow NAA55250B & muffler NAA5230E. **Price per each. (Part No: NAA55232A) $2.00

Exhaust Elbow With Gasket - Outlet is 1 5/8" O.D. For 2000, 501, 600, 700, 800, 900, NAA, Jubilee, all with 134 or 172 CID engine. (Part No: NAA55250BWG) $28.10

Exhaust Pipe, Horizontal - Outlet pipe extension, rear straight section. For: NAA, Jubilee, 2000 (1963-1964), 501, 600, 601 (1958-1962 with 134 gas engine), 700, 701 (1958-1962 with 134 gas engine), 800 (1955-1957 with 172 gas engine). Dimensions: Inlet I.D. 1-1/2", Length 54", Outlet O.D. 1-1/2" (Part No: NCA5263B) $24.96

Exhaust Pipe, Horizontal, 2 Piece - Fits NAA, Jubilee, 1953-1954 with 4 speed trans. Used from muffler to tailpipe, Contains NCA5255B and NCA5263B. (Part No: NAA5255D) $33.40

Extension Pipe - Vertical two-piece exhaust pipe with clamps, less muffler. Use without muffler for straight through design for maximum exhaust flow and more power. Pipe inlet 1-5/8" I.D., outlet 1-3/4" O.D. For 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: M105) $27.33

Intake & Exhaust Manifold Gasket - For gas engine Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. All from 1953-1964. Price is for each, 2 needed per tractor (Part No: C0NN9448C) $3.40

Manifold, Gas - Intake - Exhaust Manifold For 4 cylinder gas engines in NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 801, 900, 901, 2000, 4000. Replaces EAE9425C, 312556, B9NN9425A. Carburetor mounting holes are slotted to accomodate different carburetors. Comes with mounting gasket and 2 elbow gaskets. (Part No: TFM9425WG) $90.92

Muffler & Pipe Assembly, Vertical - For the following 134ci gas tractors: (NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 4-cylinder 2000 series, ALL 1953-64). For the following 172ci gas tractors: (800, 900, ALL1955-57), and the 4-cylinder 4000 series (1958-64). This is a vertical two-piece muffler and pipe, includes clamp. Custom design ready for assembly. Pipe inlet 1-5/8" I.D., outlet 1-3/4" O.D.. (Part No: M103) $44.97

Muffler, Horizontal - For models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 4-Cyl 2000(1953-1964), 800, 820, 840, 900, 950, 960, (1955-1957), 4-CYL 4000 Series(1958-1964). All with 134 or 172 CID gas engines. Dimensions: Inlet tube length 2-1/4", Inlet tube I.D. 1-5/8", Shell length 13", Shell diameter = 3-1/4", Outlet tube length 2-1/4", Outlet tube O.D. 1-5/8" , Muffler overall length 17-1/2" (Part No: NAA5230E) $35.46

Vertical Exhaust Assembly - For models Jubilee, NAA, 600, 700, 800, 900, 2000 (1964 and earlier), 4000 (1964 and earlier) all with gas engines. Two Piece Assembly. NO MUFFLER INCLUDED. THIS ASSEMBLY GIVES MAXIMUM EXHAUST FLOW FOR MORE POWER. 1 3/4 IN. OUTLET DIAMETER, 1 5/8 IN. INLET DIAMETER. (Part No: FDE170) $26.17

Vertical Exhaust Pipe(Less Muffler) - For models NAA, Jubilee501, 600, 700, 4-Cyl 2000(1953-1964), 800, 900(1955-1957), 4-CYL 4000 Series(1958-1964).All with 134 and 172 CID gas engines.Kit includes exhaust pipe with clamp.Does not include muffler. (Part No: NAA55237A) $31.70

Vertical Muffler & Pipe Assembly - For models 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. Vertical Muffler and Pipe assembly has 1 11/16 inch inlet and 1 3/4 inch outlet. This is one piece welded construction. (Part No: FD2110) $62.35

Vertical Muffler & Pipe Assembly - For models 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee all with gas engines. Vertical Muffler & Pipe 2 piece Assembly has 1 3/4 inch inlet and 1 3/4 inch outlet. Comes with clamp to fasten muffler to pipe. (Part No: FD1210) $45.50

Fuel System / Air Intake
Air Cleaner Assembly - For NAA, Jubilee, 600. Restoration Quality Air Cleaner Assembly. Includes cup. Also replaces EAE9600D. (Part No: 312917) $102.60

Air Cleaner Clip - For models NAA, Jubilee, 600, 700, 800, 900. Not exactly like original, works the same. (Part No: 9N9678) $6.20

Air Cleaner Cup Gasket - For air cleaners with toggle clamps on side of air cleaner (14-3/4long).Use with Air Cleaner Cup S.61648 and S.60583. For models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 9N9623B) $6.44

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2" x 3-1/4". (Part No: S.43231) $9.90

Air Cleaner Hose Clamp - Clamp, air cleaner to carburetor pipe. Tractors: 8N, 9N, 2N, NAA (1939-1954). (Part No: 9N9653) $5.60

Air Cleaner Tube - Has 1 5/8 inch O.D. For models NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681 gas & LP 1953 & Up. (Part No: EAE9620B) $29.95

Air Funnel - For models NAA, Jubilee, 600, 700, 800, 900 (2000, 4000 ALL < 1964) (Part No: NAA9684A) $27.07

Air Hose to Carburetor - 1.5 Inches - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900 1939-57 gas tractors. Rubber Air Hose is 2 3/8 inches long, 1 1/2 inch inside diameter. (Part No: 9N9652) $2.72

Carburetor Butterfly - Fits Marvel Schebler TSX33, TSX241, TSX241A, TSX241B, TSX241C, TSX420. For models NAA, NAB, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: 9N9585A) $4.24

Carburetor Elbow & Strainer - For models 8N, 9N, 2N, NAA, NAB, Jubilee. (Part No: 9N9553) $6.44

Carburetor Float - For Carburetor Models: 10850, 13876, 13877, 12493, 13879. For Tractor Models: 8N, 900, NAA, Jubilee. (Part No: CTP28) $22.00

Carburetor Float, Small Bowl - Small bowl carburetor Float for Marvel Schebler carbs (2 3/8 inches at widest point of outside edge of floats) used on 9N, 2N and 8N tractors AND used only on the following engines (yr): 134 CID (1953-1954) or 172 CID(1955-1957) gas engines on tractors: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000. (Part No: 9N9550A) $11.80

Carburetor Gasket Set - For all Models 1953-1957, using Marvel Schebler carburetor. Used on the following Marvell carbs: TSX692, TSX765, TSX976, TSX580, TSX500, TSX577, TSX241A, TSX241B, TSX241C, TSX420, TSX33, TSX771, TSX593, TSX706, TSX551 (Part No: EAF9502) $5.32

Carburetor Kit, Basic - Basic Carburetor kit with Viton Needle and Seat. For models 2000, 501, 600, 601, 700, 701, NAA, Jubilee. For Marvel-Schebler TSX428, TSX580, EAE9510C, EAE9510D. (Part No: BK47V) $19.18

Carburetor Kit, Basic - Kit for Zenith 12493, 13879 and 13880 carb used on NAA, Jubilee. (Part No: Z103) $26.36

Carburetor Kit, Comprehensive - For models NAA, Jubilee 1953-64 with 134 CID gas engine, 600 & 700 1955-1957 with 134 CID gas engine, all with a Marvel-Schebler TSX428 or TSX580. Complete Carburetor Rebuild Kit.Rebuilds OEM Carb #'s: EAE9510C, EAE9510D, B2NN9510A, B4NN9510A. (Part No: C547V) $44.21

Carburetor, New - Carburetor For NAA, Jubilee. Replaces TSX428, Zenith 13879 and Ford B2NN9510A. (Part No: EAE9510C-OE) $326.36

Carburetor, New - Carburetor For NAA, Jubilee. Replaces TSX428, Zenith 13879 and Ford B2NN9510A. (Part No: EAE9510C) $199.95

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: NAA, Golden Jubilee replaces TSX428. Center to center on the 2 mounting bolts is 2 1/4 inches. Made in USA, 1 year warranty. (Part No: 13879) $250.00

Carburetor, Rebuilt - Fits NAA, Jubilee - replacement for OEM TSX 428. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1304-CARB) $147.39

Choke Fly Assembly - Choke fly assy. 1-5/16 dia. For 2N, 600, 700, 8N, 9N, NAA, Jubilee. (Part No: 9N9549) $25.38

Cyclone Air Cleaner Glass Jar - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. Cylone Air Cleaner Glass Jar (Jar Only) Screw on type. Exactly Like Original for tractors that used the 'Cyclone' Air Cleaner only. (Part No: 230056) $30.60

Cyclone Cup and Spring Assembly - Only for those tractors (1939-1964)that used the CYCLONE air cleaner assy which MAY include: 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. Verifiy the type of air cleaner you have before ordering. (Part No: 230053) $29.60

Fuel Cap - For 8N, 9N, 2N, 600, 620, 630, 640, 650, 660, 800, 820, 840, NAA Fuel Cap. This is a non-vented cap. (Part No: D5NN9030A) $9.98

Fuel Cap, Vented - 2-5/8" O.D, chrome Finish, 1-3/4" edge of tang to edge of tang, vented, includes gasket. For models 8N, 9N, 2N, Jubilee, Golden Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2100, 2110. (Part No: C5NN9030D) $9.90

Fuel Line - Metal Line with fittings, high quality steel fuel lines are coated inside and out with Algal (95% zinc & 5% aluminum). This will prevent oxidization and will keep your fuel clean. For models NAA, Jubilee. (Part No: NCA9282C) $30.95

Fuel Sediment (SHORT) Bowl Assembly - Universal assembly does not come with fittings. For tractors 8N, 9N, 2N, NAA, Jubilee. Replaces 2N99155B & NAA9155B with short bowl. (Part No: 2NAA9155B) $20.50

Fuel Sediment Bowl Bail assembly - For tractors 8N, 9N, 2N, NAA, Jubilee. (Part No: 2N9166) $1.92

Fuel Sediment Bowl GASKET - Gasket, sediment bowl. 2" O.D. Tractors: 8N, 9N, 2N (1939-1952), NAA, 600, 700, 800, 900 (1953-1957). (Part No: NAA9160A) $1.50

Fuel Sediment Glass Bowl With Gasket - 2" Glass Bowl/W gasket fits NAA9155B and 2N9155B sediment bowls. Includes gasket. Fits 8N, 9N, 2N, NAA, Jubilee. (Part No: 9N9162) $4.99

Fuel Tank - For Gasoline engines (not for Diesel)11 gallon, No opening for sending unit. Tank has two threaded openings in bottom for fuel outlet, center and outer edge. (fuel line must be modified) fits: NAA, Jubilee 1953-54; 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NAA600800G) $203.84

Main Adjustable Needle - Main adjusting needle. For models 501, 600, 700, 800, 900, NAA. (Part No: EAE9565A) $8.46

Needle Valve - Viton float valve needle, seat & gasket assembly. For models (501, 601, 701, 600, 700, NAA, Jubilee, 2000, 800, 900, 801, 901, 4000 all with 134 or 172 CID gas engines from 1958-1964). (Part No: C3NN9D532A) $5.16

Quadrant Stop Kit - For models 2000 4 cylinder, 2N, 4000 4 Cylinder, 8N, 9N, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031 all with 4 cylinder from 1939 - 1964. (Part No: 9N521) $9.99

Screen - Air cleaner funnel screen. For tractors: NAA, Jubilee, 600, 601, 701, 800, 801, 900, 901, 2000, 4000. (1953-1964)TIS (Part No: NAA9669A) $15.16

Sediment Bowl Valve Stem - Sediment Bowl Valve Stem with wheel complete. For models 8N, 9N, 2N, NAA. (Part No: APN9194) $6.48

Throttle Bellcrank Friction Disc Spring Washer - 2-7/16" diameter, 7/16" center hole. For models NAA, NAB, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2111, 2120, 4000, 4030, 4040, 4121, 4130, 4140 (4 cyl, 1953 thru 1964). (Part No: NAA99778B) $14.90

Throttle Control Rod - 4-1/2" overall length, includes one spring steel clip at each end of the rod. For models NAA, NAB, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 701, 801, 900, 950, 960, 901, 941, 951, 961, 971, 981 1953 thru 1964 gas only. Replaces C0NN9A790A. (Part No: NAA9815F) $19.90

Throttle Control Rod - Governor to carburetor, clevis end is not included. For Models: 2000 4 cylinder, 4000 4 Cylinder, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 4-cylinder gas 1953 thru 1964). Replaces 86552618. (Part No: EAF9818C) $14.90

Throttle Rod Grommet - For models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000 4 cyl), (4000 4 cyl). (Part No: 353873S) $4.00

Gauges
Dash Light - For Models: Jubilee, NAA, NAB, 600, 620, 630, 640, 650, 660, 700, 740, 800, 820, 840, 850, 860, 900, 950, 960. Replaces 78-13466, C3NN14662A, NCA13771A. (Part No: 8NN14662A) $27.03

Instrument Panel Light - 12 Volt for models NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901, 2000, 4000. Includes bulb, light fixture and wire leads. (Part No: S.66854) $25.30

Instrument Panel Light Assembly - 6 Volt Light Assembly. For Model: 8N. (Part No: 8NN14662A) $27.03

Instrument and Gauge Kit 4 Speed - For NAA, Jubilee, 600, 700 with 4 Speed Transmission, 800, 900 - ALL 1953-57. Instrument and Gauge Kit contains: Proofmeter, Oil Gauge - 80 lb., Ammeter - 30 Amp, Temperature Gauge and Instrument Lamp Assembly - 6V. (Part No: FDGAUGEKIT_4SP) $93.56

Instrument and Gauge Kit 5 Speed - For NAA, Jubilee, 600, 700 with 5 Speed Transmission, 800, 900 - ALL 1953-57. Instrument and Gauge Kit contains: Proofmeter, Oil Gauge - 80 lb., Ammeter - 30 Amp, Temperature Gauge and Instrument Lamp Assembly - 6V. (Part No: FDGAUGEKIT_5SP) $93.56

Oil Pressure Gauge - For models 8N, 9N, 2N, 600, 700, 800, 2000, 4000, NAA, Jubilee. all before 1964. Oil Pressure Gauge, 40 lbs., 2" Body Diameter. Replaces OEM#'s Ford: FAD9273A and Massey Ferguson:506902M92. (Part No: S.61171) $16.96

Oil Pressure Gauge, 80 lb - For the following tractors (before 1965): 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000, NAA, Jubilee. Oil Pressure Gauge, 80 lbs., 2" Body Diameter. (Part No: FAD9273A) $15.52

Oil Pressure Gauge, 80LB, Black - For models 8N, 9N, 2N, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 4 cylinder), NAA, Jubilee, 1801. Black raised bezel, measures to 80 LB, dash or bracket mounted gauge with a bracket and studs 1/8" NPT thread. Repalces FAD9273A. (Part No: FAD9273A_Black) $16.95

Tachometer (Proofmeter) - For NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900, 2000, 4000 - all with 4-cylinder engines and 4-speed transmissions (1953-1964) (Part No: C3NN17360N) $39.83

Tachometer Cable - Ford Proof Meter/Tach Cable 30 1/2", Fits the following tractors (before 1965): NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: B9NN17365B) $12.00

Tachometer Cable, Steel - Ford Steel Jacketed Proof Meter/Tach Cable 30 1/2", Fits the following tractors (before 1965): NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: B9NN17365BSTEEL) $13.95

Temperature Gauge, Black Rim - For NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000, all 4-cyl before 1964 (except Majors). Temperature Gauge, 2" Diameter, 34" Capillary Tube Length. Replaces FAD10883A. (Part No: C3NN18287A-Blac) $22.22

Temperature Gauge, Chrome Rim - For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000, all 4-cyl before 1964 (except Majors). Temperature Gauge, 2 inch Face Diameter, 34 inch Capillary Tube Length. Replaces FAD10883A, and C3NN18287A.. (Part No: C3NN18287A-Chro) $29.50

Hitch / Drawbar
Chain - CHAIN, Fixed drawbar safety chain assy, EXACT reproduction of ORIGINAL drawbar chain. FOR tractors: 8N, 9N, 2N, Jubilee, NAA (1939-1954). (Part No: 9N5370) $83.34

Crank Arm, Leveling Box - For models 2000, 2100, 2600, 2610, 2N, 3000, 3100, 340, 3400, 3550, 3600, 3610, 4000, 4110, 420, 4600, 600, 700, 800, 8N, 900, 9N, NAA. (Part No: C5NN594E) $17.51

Drawbar Link Check Chain Anchor - Anchor, Drawbar link check chain (pair- one right and one left). For 2000, 2600, 2610, 2N, 3000, 3600, 3610, 4000, 4600, 4610, 600, 700, 800, 8N, 900, 9N, Dexta, NAA, Super Dexta, Jubilee. (Part No: 957E5967) $22.06

Eyelet Assembly, Check Chain - Fits 9N, 8N, NAA, Jubilee, 900, (2000 4-cyl RowCrop 1/1953 & newer), (4000 RowCrop 1/1953 & newer). (Part No: EC0N660A) $6.99

HITCH BALL 10000LB 2-5/16 - 2-5/16 BALL SIZE, 1-1/4STUD THREAD, 2-1/2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114) $23.85

HITCH BALL 15000LB 2-5/16 - 2-5/16 BALL SIZE, 1-3/8STUD THREAD, 2-5/8 STUD LENGTH, 15000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_) $23.40

HITCH BALL 2000LB - 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834) $12.30

HITCH BALL 3500LB - Hitch ball. 2" ball size, 3/4" stud thread, 1-7/8" stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234) $12.64

HITCH BALL 5000LB - Hitch ball. 2" ball size, 1" stud thread, 2-1/8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21) $14.44

HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5/16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161) $20.52

Level Box Fork - Right - Fork, hydraulic lift leveling rod, Right Hand. Length 10-1/4". For 8N, 9N, 2N, Jubilee, NAA. (Part No: 9N585A) $25.68

Level Box Handle - Lever handle. For 2000, 2N, 4000, 501, 600, 700, 800, 8N, 900, 9N, Jubilee, NAA (Part No: 9N594) $10.60

Leveling Box - Economy - For models 8N, 9N, 2N, NAA, Jubilee, Dexta, Super Dexta. Working length of 19.5 to 27 inches. Pin holes are 3/4 inch. (Part No: ECON577AB) $24.95

Leveling Box Assembly, Left - Left Hand Rod and fork assembly, hydraulic lift, left hand. For 8N, 9N, 2N, NAA, Jubilee, tractors. 1939 - 1954. 18 to 22 Inches Center to Center adjustablility. (Part No: 8N564B) $45.09

Leveling Box Assembly, Right - Right Hand Leveling Box Assembly with fork. Adjusts 21.5 inches. For 8N, 9N, 2N, NAA, Jubilee. (Part No: 8N577A) $68.80

Leveling Box Gear - Gear, leveling box pinion. For 2000, 2N, 3000, 4000, 501, 600, 700, 800, 8N, 900, 9N, Jubilee, NAA (Part No: B9NN568A) $13.40

Leveling Box Knuckle Pin - MUST ORDER IN QTY 2 PRICED EACH. For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 701, 801, 900, 950, 960, 901, 941, 951, 961, 971, 981, 8N, 9N, 2N all built 1939 to 1964, (2000, 3000, 4000 1965 and up), (3600, 4600 1975 and up). 5/8 Pin Diameter 2 7/8 usable length. Takes our 3/16 Linch pin (P/N DKP316). MUST ORDER IN QTY 2, PRICED EACH. (Part No: 9N595) $3.00

Leveling Box Knuckle, Right - Knuckle, Right Hand leveling assembly. Pin Holes are 5/8 of an inch. The shape of the one pictured may vary slightly from different manufacturer's. For models 2000, 2N, 3000, 3600, 4000, 4600, 501, 600, 700, 800, 8N, 900, 9N, Jubilee, NAA. Uses 2 pins P/N 9N595. (Part No: 957E566) $11.74

Leveling Box Yoke Rod, LH - Left Hand side. Rod dia is .750". For models 2000, 2100, 2600, 2610, 2N, 3000, 3100, 340, 3400, 3550, 3600, 3610, 4110, 420, 600, 620, 30, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 8N, 9N, NAA, Jubilee. (Part No: C5NNB863A) $34.89

Lift Arm - For 8N, 9N, 2N, NAA, Jubilee. Lower 3-Point lift Arm. Center to Center measurement 32 inches. (Part No: 9N555B) $44.56

Lift Arm - 32 Inch - Cat 1 - Lift Arm - Red. Category 1. 32 inch length, 7/8" holes in end sockets (swivel type). Replaces 180846M91 and 30543E91. (Part No: JSA1002R) $51.31

Lower Link Support Pin - Lower link support pin. For 1801, 2000, 3000, 3600, 4000, 4600, 600, 601, 700, 701, 800, 801, 8N, 900, 901, NAA, Jubilee. (Part No: NCA563C) $21.76

Pin, Hydraulic Lift Yoke - For models 8N, NAA, Jubilee, (1950-1954). (Part No: 8N486B) $17.24

Shaft Level Box - Shaft and gear, length 14; thread length 4. For 2000, 2N, 4000, 600, 700, 800, 8N, 900, 9N, Dexta, Jubilee, NAA, Super Dexta (Part No: NCA579B) $20.98

Stabilizer Arm Red - Arm only, red. Length 31-1/2 center to center. For models 2N, 600, 800, 8N, 9N, Jubilee, NAA. (Part No: 230042R) $14.30

Stabilizer Kit, Extra Heavy Duty - Universal Stabilizer Kit For 8N, 9N, 2N, NAA, Jubilee, 600, 800. Contains (2) stabilizer bars, universal brackets with pins & hardware. 31.5 inches center to center. ** $15 ADDED TO SHIPPING DUE TO WEIGHT ** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 231253XHD) $62.19

Stay Strap, Lower Red - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (Part No: 9N5375) $12.34

Stay Strap, Upper Red - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. Stay Strap - Upper. (Part No: 9N5374) $12.50

Swinging Drawbar - Drawbar is replacement drawbar for the swinging drawbar kit. 600, 800, 840, 841, 851, 860, 8N, NAA, Jubilee. Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. (Part No: C0NN805F) $43.35

Swinging Drawbar Clevis Assembly - Clevis assembly with pins for SDA6 or SDA8 kits. For models 8N, 8N, 2N, Jubilee, NAA, NAB, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, 2120, 2121, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4120, 4130, 4131, 4140. (Part No: NCA803B) $29.64

Swinging Drawbar Hanger - Drawbar hanger. For 600, 8N, NAA (Part No: NCA809A) $42.51

Swinging Drawbar Kit - For NAA, 600, 8N. Swinging Drawbar Kit. Painted Red. Contains Drawbar: 29.375" long, 2.00" wide, 1.00" thick, Rear Drawbar Hanger, Drawbar Clevis Assembly and Drawbar Clevis Pin. (Part No: 49A34R) $113.25

Thrust Bearing - Leveling Box Assembly Bearing. For 2000, 2N, 3000, 3600, 4000, 4600, 501, 600, 700, 800, 8N, 900, 9N, Dexta, Jubilee, NAA, Super Dexta (Part No: 9N554) $11.99

Top Link Rocker - For 8N, 9N, 2N, NAA, Jubilee, 600, 800 Hi Clearance, 601, 801, 2000 4 cyl Hi-Clearance, 4000 4 cyl Hi-Clearanc. (Part No: NCA535A) $55.46

Hydraulic System
Bearing - Needle bearing assembly for pump housing. For 2000, 4000, 501, 600, 700, 800, 900, Jubilee, NAA (Part No: NCA881A) $12.54

Coupler Hub, Hydraulic Pump - For use with Loader-Backhoe Hydraulic pumps. Hub is 4" overall diameter, 4 mounting holes at 7/16" diameter, smooth type, 2-3/4" spacing. 1-3/8" relief diameter, 9/16" depth, 10 spline, 1" center bore. (Note: Non-spline coupler hubs (splined) are available in 5/8, 3/4, and 7/8" -CALL). For models 2000, 4000, 501, 600, 700, 701, 800, 900, Jubilee, NAA. (Part No: 290421) $44.20

Draft Control Plunger - For models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, Dexta, Super Dexta. (Part No: 8N541B) $34.95

Draft Control Plunger Spring - Fits between Hydraulic plunger & yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000 (except rowcrop), Dexta, Super Dexta. (Part No: 9N547B) $38.79

Draft Control Spring Plate, with Pin - For models 8N, NAA (1948-1954). (Part No: 8N527) $22.55

Felt, Spring Seat - Hydraulic lift draft control spring seat. For models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Part No: 9N529) $5.12

Friction Disk - Hydraulic Control Lever. 3" dia. 1/2" hole. For models 2N, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, (2000 & 4000 4 cyl.). Price is for each. (Part No: C5NN518B) $2.00

Gasket Kit - Piston type hydraulic pump gasket & O ring kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA. (Part No: FPN910B) $10.70

Hydraulic Lift Control Quadrant - For models 8N, 9N, 2N. Hydraulic lift control lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 800, 900, 700, all 1939-1964 4 cylinder. Replaces 2N516A, 2n516A2. (Part No: 9N515) $25.00

Hydraulic Lift Cover Repair Kit - For NAA 1953-64, Jubilee. Lift Cover Repair Gasket Kit. (Part No: LCRK5354) $5.98

Hydraulic Lift Level Indicator (Dip Stick) - 8N, 9N, 2N, NAA. Hydraulic Lift Level Indicator. (Part No: NAA927C) $6.08

Hydraulic Lift Lever - For models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 cyl.). (Part No: S.66598) $26.70

Hydraulic Lift Piston - Single groove piston 2-1/2" dia., groove is centered 1 1/4 inch from bottom of piston. O-Ring available as NAA533A and Back Up Washer as NAA473A. For models NAA, NAB, 8N, 9N, 2N. (Part No: NAA530B) $26.20

Hydraulic Lift Piston Connecting Rod - For Dexta, NAA, 2N, 2000, 3000, 4000, 600, 700, 8N, 800, 9N, 900. Replaces NCA526A and 957E526. (Part No: 86563314) $35.53

Hydraulic Lift Ram Arm - For NAA, Jubilee. (Part No: NAA545A) $104.11

Hydraulic Lift Shaft Arm - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 gas. (Part No: 9N543B) $60.68

Hydraulic Lift Shaft Bushing - 2 used. I.D. 2.000, O.D. 2-3/8, L. 3.00. For models 8N, 9N, 2N, NAA, 600, 800, 2000, 3000, 4114. (Part No: 9N531C) $22.60

Hydraulic Lift lever Assembly - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 PRIOR TO 1965. Assembly contains: Lift Control Lever with Ball End 2N512, Lift Control Plate (Cast Aluminum as original) 2N-516A2 and Friction Disc C5NN518B. (Part No: 2N512) $41.94

Hydraulic Lines - Fits tractors with piston type pump (round body). For Models: Jubilee, NAA. (Part No: NAA876A) $275.00

Hydraulic Pump Drive Shaft - Hydraulic pump shaft. 3/4" diameter, 9-1/4" overall length. End A type: key, 3/4" size, End B type: 6 spline, 3/4" size. Associated components end A flex. cplr: L601-14 (3/4" bore drive flanges both sides), end B hub: 1". Fits: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 194355) $25.90

Hydraulic Pump Drive Shaft - Shaft is 3/4" diameter, 9-3/8" overall length. End A type: key, 3/4" size. End B type: 10 spline, 1" size. Associated components: end A mates to flex coupler#: L601-14 (3/4" bore drive flanges both sides) and end B mates to hub#: 290421. Pump Drive For 1953-64 tractors: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, Jubilee, NAA, 2000, 4000. (Part No: 195454) $38.55

Hydraulic Pump Gear - Main gear for piston pump. Center of ger is 6 spline. Replaces NCA908A For models 2000, 4000, 600, 700, 800, 900, NAA. (Part No: C3NN908A) $38.66

Hydraulic Pump Gear Housing - For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NCA905C) $184.95

Hydraulic Pump Hub - Hydraulic Pump Hub for Sherman 54 Series Loader. Hydraulic Pump Hub 3 7/8 O.D., 2 3/4 Center to center on holes. 6 spline center bore, 3/4 I.D. (Part No: 54C2055) $41.75

Hydraulic Pump Repair Kit - Hydraulic Piston Type Pump Repair Kit. Services 1953-1964 four cylinder gas and diesel tractors. For models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 901, 2000, 4000. Will service NCA600C and NCA600F pumps. Replaces CCPN600A and CCPN600B. (Part No: CCPN600AB) $35.93

Hydraulic Pump Safety Valve Assembly - For models NAA, Jubilee. (Part No: NAA638E) $86.97

Hydraulic Pump Shaft - Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies. For Models: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681 (Part No: NCA966E) $54.39

Hydraulic Pump Shaft Bearing Cone - Use with pump shaft NCA966E. For models NAA, 600, 700, 800, 900, (2000, 4000 1964 and prior). (Part No: D5NN1201A) $5.70

Hydraulic Pump Shaft Bearing Cup - Use with pump shaft NCA966E. For models NAA, 600, 700, 800, 900, (2000, 4000 1964 and prior). (Part No: D5NN1202A) $4.30

Hydraulic Pump Shaft Oil Seal - For piston type pump. Measures I.D. 0.9350, O.D. 2.004, W 0.5315. For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. (Part No: NCA851A) $5.00

Hydraulic Spring Seat - For models 8N, 9N, 2N, NAA, 600, 900 (1948-1954). (Part No: 9N525B) $16.98

Lock Washer, Special - Hydraulic lift shaft to arm. For models 9N, 8N, NAA (1939-1954). (Part No: 9N550) $8.94

Seat, Hydraulic Lift Draft Control Spring - Exact of original. Fits all models (1939-1964). (Part No: 2N624) $11.92

Swivel - Draft Control - For models NAA, Jubilee, 600, 800, 601, 801, 2000, 4000 (except rowcrop), Dexta, Super Dexta. (Part No: 957E692) $24.21

Wobble Shaft Plate - For models 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. Replaces 81813626. (Part No: NCA859A) $68.00

Implements
Bush Hog Axle Spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40) $6.44

Caster Assembly, Old Style - Tail wheel & hub assembly with grease fitting. 4 x 8 inch rim, 15 inch O.D. of wheel. Includes Wheel, Hub, Axle Bearing, and Bolt Assembly.OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215) $103.86

Hub Assembly - Hub with bushings (3/4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 with new style 1-1/4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH) $34.53

Tail Wheel Assembly - 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1/2" bolt circle. 5-1/4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294) $125.98

Tail Wheel Assembly - 4" x 8" tail wheel assembly with laminated tire. 3-5/8" pilot, 4 bolt holes, 5" bolt circle, 3-3/4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH) $42.90

Lights
Bracket - Headlight bracket reinforcement, clear zinc plated for ROUND headlight bracket. For tractors: 8N, NAA {1949-1954}. (Part No: 8N13102) $12.50

Clip - Clip, {rear lamp wire to brake actuating shaft} 2 required. For tractors: 8N, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N14565) $14.58

HEADLIGHT SET - 12 VOLT - For models 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 8N, 9N, 2N, NAA 1939-1964. This is a pair of headlight assemblies Complete with sealed beam bulb. EXACTLY like the original with TRACT-O-LITE stamped into housing. (Part No: 2N13005-12V) $195.36

HEADLIGHT SET - 6V - EXACTLY like the factory original with TRACT-O-LITE stamped into housing for models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For models 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 8N, 9N, 2N, NAA 1939-1964. This is a pair of headlight assemblies Complete with sealed beam bulb. Spare sealed beam bulbs available as p/n L4019. (Part No: 2N13005-6V) $195.36

Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V) $48.63

Headlamp Assembly, 12 Volt, Blue - (Single) 12-volt, metal body & bezel, blue enamel finish, 5-3/4" diameter for the following tractors: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 801, 901 (1958-1962), 2000, 3000, 4000, 5000, 7000 (1965-75). Does not match original. (Part No: 310068) $61.36

Headlamp Assembly, 6 Volt, Grey - (Single) Lamp Assembly, 6-volt, metal body & bezel, grey enamel finish.For models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 2000, 4000 (1939 to 1964). Does not match original. (Part No: 310066F) $54.90

Headlight Bracket - ROUND right or left side. For models 8N, NAA, Jubilee {1949-1954}. (Part No: 8N13472) $16.06

Headlight Rim - Headlight rim, grey finish. Ring with Bolt For 310066 (6 Volt) & 310068 (12 Volt) 5 7/8" Diameter Light Units. For 2000, 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 501, 5600, 5700, 600, 601, 6600, 6700, 700, 701, 7600, 7700, 800, 801, 900, 901, NAA (Part No: C0NN13045B) $24.40

Knob, Light Switch - Aluminum. For models 8N, 9N, 2N, NAA, Jubilee. (Part No: 9N9703) $14.94

Light Rim - Head light door assembly {rim}. For tractors with TRACT-O-LIGHT stamped lights only. For tractors: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900 {1939-1956}. (Part No: 2N13043) $25.02

Light Rim - Rim, worklight bulb retainer, O.D. 5-1/4", I.D. 4". For models 8N, NAA, {1949-1954}. (Part No: 8N15513) $25.34

Light Switch - For models 8N, 9N, 2N, NAA, Jubilee. Light Switch with fuse. (Part No: 8N11654B) $13.30

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG) $41.70

Portable Halogen Work Lamp - 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH) $72.05

Retainer 3 Per PGK - Clips, worklight bulb to rim retainer. Set of 3 {special clip to hold bulb assembly in rim}. For tractors: 8N, NAA {1949-1954}. (Part No: 8N15534) $13.08

Switch, Light - Switch, Worklight. For models 8N, NAA (1949-1954). (Part No: 8N13740) $24.90

Tail Light Assembly, 6 Volt - Light assembly has FOMOCO lens (plastic). For 6 volt tractors made between 1953 to 1954 including NAA & Jubilee, also fits the following models: (Caution; may not fit later models of these tractors): 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: FAA13402A) $41.01

Tail Light Wire Clip - For 8N, 9N, 2N, NAA and Jubilee to 1954. Rear Lamp Wire Clip - 6 required per tractor. (Part No: 9N17668) $2.50

Tail Lite, License Light, Lens Gasket - For models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 all 1939-1953. (Part No: FAA13447A) $4.90

Taillight Mounting Bracket - Exact of original. Mfg in USA. (Goes between tailight and fender bracket - mounting on top of 9N13470 or 9N13471.)For DUOLAMP tractors 8N, 9N, 2N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 1811, (2000, 4000 4-cyl), 1801 series. (1949-1954) (Part No: 8N13423) $21.70

Winged Headlight Bracket - Right Side. For Tractors: 8N, 9N, 2N, NAA. (Part No: 9N13472) $29.16

Winged Headlight Bracket - Left Side. For Tractors: 8N, 9N, 2N, NAA. (Part No: 9N13473) $29.16

Work Light Assembly - 12 Volt - Worklight assembly, 12-volt seal beam with on/off switch. Includes 8N15532 fender bracket spacer. DOES NOT COME WITH BRACKET. Like OEM quality except for the lense. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947-1964}. (Part No: 8N15500-12V) $112.70

Work Light Assembly - 6 Volt - Worklight assembly, 6-volt seal beam with on/off switch. Includes 8N15532 fender bracket spacer. DOES NOT COME WITH BRACKET. Like OEM quality except for the lense. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947-1964}. (Part No: 8N15500-6V) $112.70

Worklight Bulb, 6 Volt - Worklight bulb assembly, FROSTED lens with rings. M.F.G. in U.S.A. For tractors: Late 8N, NAA, {1951-1954}. (Part No: 8N15514L) $57.79

Worklight Kit, 6 Volt, Chrome - Kit includes, 6" steel body, chrome ring, sealed beam bulb, bulb retaining clips, steel worklight mount(socket), and switch. Assembly required. For models 8N, 9N, 2N, NAA, 600, 800. (Part No: S.43377) $67.34

Worklight Mounting Socket - Fender bracket round spacer, worklight to fender bracket {included with work-light assemblies}. For Ford tractors: thru 1958 (Part No: 8N15532) $16.50

Miscellaneous
Pin Clip Kit - Kit, pin & spring clip. For 2000, 3000, 4000, 501, 600, 700, 800, 900, Jubilee, NAA (Part No: CBPN804A) $5.14

Oil System
Filter Breather - Rocker Arm Cover Vent Element. Tractors: NAA, 600, 700, 800, 900, 2000, 4000. (Part No: EAF6866A) $9.48

Oil Dipstick - Engine oil level. For models 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: C0NN6750B) $8.52

Oil Filler Breather Element - Fits caps 310030 and 8N6766B. For models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. (Part No: 8N6782A) $4.76

Oil Filler Cap with Element - For models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Overall length is 3 5/8, 1 1/2 diameter tube and tube is 1 3/8 long. Also replaces OEM 8N6766B. (Part No: 310030) $12.46

Oil Filter - Cartridge Type. For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 thru 1965, 1800, 223, 240, 289, 300, 320, 332, 352, 391. Comes with gasket. Measures 4 3/4 inches long, 4 inch diameter with holes in each end of 3/4 inch. (Part No: CPN6731B) $8.88

Oil Filter - Spin-On Type. For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 3000, 4000, 5000, 2600, 3600, 4600, 5600, 6600, 2610, 3610, 4610, 5610, 6610. Also replaces, 86546614 and D9NN6714EA. (Part No: E7NN6714AA) $6.82

Oil Filter Adapter Kit, Spin On - Converts tractor from element style filter to spin on oil filter. Comes with one filter. For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981 all from 1953 to 1964 with 4 cylinder gas engine. Can use replacement spin-on filter E7NN6714AA. (Part No: CPN6882A) $31.13

Oil Filter Mounting Gasket - This gasket fits behind the mounting plate that the filter screws on to. For spin on type oil filters only. For models 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Part No: EAA6838A) $2.95

Oil Filters, Tri Pack - Three pack of cartridge Type oil filters. For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 thru 1965. Measures 4 3/4 inches long, 4 inch diameter with holes in each end of 3/4 inch. Comes with gasket. (Part No: CPN6731BTRIPACK) $23.84

Oil Pan Plug Kit - Gasket, oil pan plug & screen assembly. For all gas models 1939-1964. Fits 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981 (Part No: 9N6730WG) $23.49

Oil Pump Gear - Gear, oil pump driven. For models 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: EAA6614B) $26.88

Oil Pump Gear & Shaft - Gear and shaft assy. For models NAA, Jubilee. (Part No: EAA6608C) $54.55

Oil Pump Repair Kit - Oil pump repair kit for gear type pump. For models NAA, Jubilee with 134 CID engine. (Part No: CPN6600A) $59.81

Oil Pump, Slotted Drive - Slotted Drive type for 134 CID gas engine in: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 2000 (<1964). Can also replace EAF6621B. (Part No: EAF6621D) $76.21

Pump Gear/Shaft Assembly - Gear & shaft assembly, oil pump drive. For 2000, 230A, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 5000, 5030, 515, 531A, 532, 535, 5600, 5610, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 8000, 8700, 9000, 9700, NAA (Part No: E9NN6A820AA) $42.20

PTO / Driveline
Bearing, PTO Shaft - Front PTO shaft bearing, 2 3/8 inches O.D. 1 3/16 I.D. 5/8 width. For 8N, 9N, 2N, NAA (1953-54), Jubilee, NAB, 600 thru 1956. Replaces 9N715C. (Part No: 9N715BC) $4.18

PTO CAP - For models 9N, 8N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. NOT LIKE ORIGINAL. (Part No: 310088) $7.56

PTO CAP - CAP WITH 1 1/8" PTO SHAFT ONLY. FITS 8N, 9N, 2N, NAA, 600, 700, 800, 900. (Part No: 2N726) $8.04

PTO Cap - Cap for all Ford Models 1939-64. Like original. 3 1/2 inches in length. Inside usable length is 2 7/8 inches. (Part No: 310088-OEM) $22.40

PTO Collar with Pin - Collar with tapered pin fits models: 9N, NAA, Jubilee, 600, 800, 900 (Part No: NAA70038C) $7.59

PTO Housing Gasket - PTO Housing Gasket. For 8N, 9N, 2N, NAA, all through 1954. (Part No: C5NN747A) $.99

PTO Shaft - PTO shaft, 1-3/8". Converts standard NAA710B shaft to 1-3/8". For models NAA, Jubilee. (Part No: NAA710-38) $65.75

PTO Shaft - PTO Conversion Assembly For NAA, Jubilee, (converts 1 1/8" shaft to 1 3/8"). Complete assembly includes: Shaft housing, cover, retaining collar seal, collar with tapered pin, 2 snap rings, front bearing, shaft seal sleeve, seal, and shaft. Assembly ready to bolt on. Length measures about 30 5/16". (Part No: NAA700-38) $115.72

PTO Shaft Housing - For 8N, 9N, 2N, (NAA 1953-54), Jubilee, NAB. (Part No: 9N733B) $29.28

PTO Shaft Seal - Fits 1-1/8" shaft. For models 8N, 9N, 2N, NAA 1953-1954, Jubilee, NAB. (Part No: D8NN703AA) $7.06

PTO Shaft Seal, Double Lip - For All Models: 1939 thru 1964 with 1-1/8" or 1-3/8" PTO shaft. 2.45 O.D., 1 5/8 I.D., 5/8 wide. Replaces OEM#s : D8NN703AA & D9NN703BA, and 9N703B. (Part No: D9NN703BB) $7.06

PTO Shaft Sleeve Bushing, 1-1/8 - For 1-1/8" PTO shafts (NOT 1-3/8")1.113" I.D, 1.620" O.D, 1" thick. For models 9N, NAA (1953-54), 2N, 8N, NAB, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: 9N735B) $9.95

PTO Shaft Sleeve Bushing, 1-3/8 - For 1-3/8" PTO Shafts, 1.185" I.D., 1.620" O.D.. For models 9N, NAA (1953-54), 2N, 8N, NAB, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 all with 1-3/8" PTO shaft. (Part No: 9N73538) $4.80

PTO Shaft Thrust Bushing - .930"long, 1.634" I.D . For models 2000, 4000, 600, 700, 800, 900, NAA. All with 1.125 or 1.375 PTO shaft. (Part No: NAA798A) $19.87

PTO, Snap Ring - For models 8N, 9N, 2N, NAA all 1943-54. 2.58 inches O.D., 2.26 inches I.D. Must be ordered in quantities of 2, Priced indvidually. (Part No: 9N754) $2.40

Paint
Paint, Vermillion Red, 1 Gallon - For models (1948-1957). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822GAL) $45.50

Paint, Vermillion Red, 1 Quart - For models (1948-1957). From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822QT) $25.92

Paint, Vermillion Red, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** For models (1948-1957). Vermillion Red. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2822SP) $43.56

Seats
Flip-Over Seat Spring, Hinge & Bolt Assembly - For flip-over seats on 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 900, 2000, 4000. All 4-cylinder gas. Seat not included. Equivalent to NCA404B and NCA436A. (Part No: R0642R0643) $55.19

Pan Seat - 19 inch wide fixed seat For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 2000, 4000, all with 4 cylinder engine. This is not a flip-over seat. (Part No: 8N400) $43.04

Pan Seat - 19 inch wide flip-over style. Replaces OEM# C5NN400AE. Seat only - does not include spring or bracket. For NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 2000, 4000, 8N, 9N, 2N(4-cylinder). May come with a darker blue paint than pictured. (Part No: C5NN400AE) $42.09

Rubber Bumper - Drivers seat to spring. For models 8N, NAA, NAB. All 1948-1954. Bumper has a 1 Inch Diameter. (Part No: 8N434B) $7.24

Seat Assembly, Black & White - For models 8N, 9N, 2N, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Seat Assembly has a square bottom cushion with slightly curved backrest. This seat is designed to bolt to a U-Shaped spring (Part # 9N404) for a Non-Flip style pan seat. (Part No: CSA888-5) $125.45

Seat Assembly, Blue - For models 8N, 9N, 2N, 600, 601, 700, 701, 800, 801, 900, 901, NAA. Seat Assembly has a square bottom cushion with slightly curved backrest. Complete seat. This seat is designed to bolt to a U-Shaped spring for a Non-Flip style pan seat. (Part No: CSA887-8) $125.45

Seat Clip - For models 8N, NAA (1948-1954). This clip is for drivers seat to spring. This clip will only work with original 3 inch wide spring. Many of the replacement springs are 2 3/8 inches wide. (Part No: 8N433) $14.38

Seat Cushion (Blue and White) - For all ford tractors with 21 inch wide steel pan seat. This seat cushion is blue and white with a FORD script logo. (Part No: R4120) $33.00

Seat Cushion (Red and White) - Seat Cushion - Deluxe with 2" of foam padding. For all ford tractors with 21 inch wide steel pan seat. This seat cushion is Red and white with a FORD script logo. (Part No: R4118) $33.00

Seat Cushion (Red) - For all ford tractors with 19 inch wide steel pan seat. This seat cushion is red with a FORD script logo. (Part No: 8N401R) $46.68

Seat Cushion, Blue - For all ford tractors with 19 inch wide steel pan seat. This seat cushion is blue with a FORD script logo. (Part No: 9N401B) $50.17

Seat Hinge - Fits Models:2000, 4000, 600, 800, 8N, 900, NAA. Can replace OEM 86531095. This hinge is made for the 2 3/8 inch wide spring. Will work on the 3 inch spring with modification of bolt holes. (Part No: R0643) $18.88

Seat Hinge Pin - Exact of original. For models 8N, NAA, Jubilee all from 1948 to 1954. (Part No: 352664S) $7.64

Seat Spring - For Flip-Over Style Seat For 8N, NAA, 600, 800, 900, 2000, 4000 with 4 Cylinder Engine. 2 3/8 inches wide. May require modification of bolt holes for an original hinge. (Part No: NCA404B) $41.49

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3/4" D). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY) $98.77

Sheet Metal / Body Parts
Air Cleaner Door - Air Cleaner Louvered Door Restoration Quality For 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, 701, 801, 901, 2000, 4000 units before 1965. Replaces NAA-9661-B. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: NAA9661B) $23.25

Battery Box - For NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 800, 900, 1801, 2000, 4000 - 1953 to 1964. Replaces NCA 10432A. Comes Primed. Use with (SOLD SEPERATELY) battery hold down NCA10718A and hold down Bolts 8N10728WN & NCA10728WN. Note additional parts numbers in "comments" section of order form if required. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: C0NN10732T) $52.04

Battery Cover, Restoration Quality - Battery cover with access door, also with round cable opening. Exact of original (powder coated red). Replaces NAA5162A Fits: NAA, Jubilee. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: NAA5162) $70.04

Battery Hold Down Bolt - Bolt with nut. For models 8N, NAA (1948-1954). (Part No: 8N10728WN) $9.54

Battery Hold Down Kit - For models 8N, 9N, 2N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000-4000 series (1953-1964). Dimensions of hold down, Width 9-1/4", length 7-1/4", center-to-center mounting holes 10-1/8". The short bolt included with this kit is not used on the 8N, 9N, 2N, NAA. A simple bolt is used but not supplied with this kit. (Part No: NCA10718A-KIT) $29.99

Bolt Kit 8 Per PKG - Bolts for running board to running board bracket. Kit includes 8 running board bracket bolts, nuts and washers. For tractors:: 8N, NAA (1948-1954). (Part No: 355471-KIT) $23.79

Bracket Set For Lights - Fits rounded fenders. For models 8N, 9N, 2N, NAA, Jubilee. (Part No: 1750673M1) $39.98

Bumper - For NAA, Jubilee, 600 & 800 Series (thru 1964), 2000 & 3000 (1965 & up), 2600, 3600, 4600 (1975 & up), 8N, 9N, 2N - has 3 front vertical bars to protect tractor grill plus heavy duty horizontal bumper. Painted red, axle mount with mounting brackets. This is an aftermarket item. Add an additional $20.00 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: BU1021) $267.76

Bumper Bolt Kit 4 Pieces - Bumper Bolt kit, front axle bolt kit, contains 2-3.40 bolts, 2-4 bolts, 4-351505s8 washers & hex nuts. For tractors: 8N, 9N, 2N, NAA, 600, 800 {1939-1957}. For 600, 700, 800, 900, NAA (Part No: 350790-KIT) $21.84

Bumpers 6 Per PKG - Bumper, hood tip center panel rubber bumper kit {6 per pkg}. For tractors: NAA, 600, 700, 800, 900 {1953-1957}. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 354177S6) $13.24

Fender - Fender with Bracket For NAA, Jubilee - Fits RH & LH. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: C0NN1623A) $127.54

Fender - Fender panel (no longer supplied by OEM). Panel comes primed. To install, remove fasteners from old panel, drill new holes and bolt new panel in place. Panel can be shipped UPS. Panel, less mounting brackets. For 8N, 9N, 2N (1939 to 1952) and row crop high clearance models 700 and 900 (1957-1962), fits right side or left side. (Part No: FF101) $88.70

Fender - Fender Skin, Bracket not included- Fits RH or LH. For models 2000, 2600, 2610, 3000, 340A, 3600, 3610, 4000SU, 420, 445A, 4500, 4600SU, 535, 540A, 540B, 545, 600, 800, Jubilee, NAA. Add $20.00 per fender in addition to regular shipping charges. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: E1NN16315DA) $89.96

Fender Bolt Kit 4 Per PKG - Bolt kit, rear fender bracket to axle housing, bolts 6 1/4 x 5/8, nut & washer kit {set of 4}. Verify your bolt size. For tractors: 8N, NAA {1948-1954}. For 600, 700, 800, 900, some early 2000 and 4000. (Part No: 355310-KIT) $41.16

Fender Skin, No Script - Fender skin, without script. For Models 2N, 8N, 9N, Jubilee, NAA. Replaces: C0NN16312A (Part No: C0NN16312A) $73.78

Fender With FORD Script - Fender panel, steel. Has raised 'FORD' script. Panel comes primed. To install, remove fasteners from old panel and bolt new panel in place. Panel can be shipped UPS. Panel, less mounting brackets. For 8N, 9N, 2N, 700, 900, NAA, Jubilee(1939 to 1954), fits right side or left side. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: FF101S) $185.99

Front Bumper - Heavy Duty - For 8N, 9N, 2N, NAA, Jubilee, 600, 800, 2000, 3000, (4000SU with I-Beam Front Bumper). Add an additional $15 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Welded, not riveted. Slightly different than original. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 311541HD) $110.63

Front Grill - Fiberglass. For models NAA, 600, 800. Replaces NCA8200A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 713477) $191.40

Front Grill, Restoration Quality - Metal. For models NAA, Jubilee, 600, 800. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: NCA8200A) $252.87

Grill Mounting Stud - For NAA, Jubilee. 2 Used per tractor. (Part No: NAA88219A) $7.50

Hood Emblem Housing - For Models: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981. Housing holds emblem and connects side pieces of hood. **WARNING** Fit to tractor before painting. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 311319) $103.10

Hood Kit - Include left, right and center hood pieces. For Models: 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, NAA, Jubilee. Replaces 16625, 16626, 16617. (Part No: 16625KIT) $399.95

Hood Latch Spring - For models Jubilee, NAA, 501, 600, 700, 800, 900, (2000, 4000 with 4 cylinder gas engines). (Part No: NAA16925B) $14.85

ROP Frame Assemply - Roll Over Protections - Cross Bar Type. Fits 8N, 9N, 2N, Dexta, 2000, 2100, 3000, 600, 700, NAA, Jubilee, 501, 601, 701. Due to truck freight of this 100 lb item, additional shipping above the regular shipping cost has already been added to the price. (Part No: MF1) $833.00

Running Boad Bracket, Right Rear - Fits 8N (above SN# 263843), NAA. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 8N16486) $43.13

Running Board Bracket - Front - For models 8N, NAA, 600, 700, 800, 900, 601, 801, 2000, 4000, all WITHOUT SELECT-O-SPEED TRANSMISSIONS 1948 to 1964. Front Running Board Bracket Right OR Left side. Price is for EACH bracket. EXACTLY like the ORIGINAL running board bracket. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 8N16470) $25.80

Running Board Bracket - Rear/Right - For model NAA 1953-1954. Rear Running Board Bracket - Right Side. Bracket Only. Exactly Like Original. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: NAA16486A) $42.74

Side Panel - RH - Front right hand lower side panel assembly for NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 (1953 thru 1964). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: C3NN16652B) $117.87

Side Panel, Left - Front left hand lower side panel assembly for NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900, 2000, 4000 (1953 thru 1964). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: C3NN16653B) $117.87

Toolbox - For Models: NAA, Jubilee. (Part No: NAA16451) $74.00

Steering
Axle Pin Support Bushing - Brass Bushing For 2N, 2000, 4000, 8N, 9N, 600, 700, 800, 900, NAA, Jubilee. Front axle bushing 1939-1964 with standard front axle. Bushing, front axles, 1.778" I.D., 1.913" O.D., 1.5" L (not for heavy, industrial, or grove axles). (Part No: 2N3039) $9.52

Bearing Retainer - Steering Shaft Gear Thrust - For models 1801, 2130, 3500, NAA, NAB, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 230A, 2300, 231, 2310, 233, 2600, 2610, (3000 from 1-1965 to 12/1974), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4130, 4140, 501, 530A, 531, 541, 600, 601, 611, 620, 621, 630. Sold in quantities of 2 price is for 1. (Part No: 8N33581) $2.08

Bolt, Radius Rod to Front Axle - MINIMUM ORDER IS 2 (order in multiples of 2). Length is 5-1/2", 5/8 -18 thread. Head O.D. is 7/8" Fits the following tractors: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 (up to 1964), 4000 (up to 1964). Price shown is for 1 bolt. (Part No: NAA3415B) $13.04

Drag Link Dust Cover - Steering drag link rear ball joint cover. For tractors: 8N, 9N, 2N, NAA, 600, 800 (1939-1957). Center is black rubber. Small hole end is 5/8 inch hole, Large end is 1 7/16 inch inside diamter. (Part No: 9N3324) $14.46

Drag Link End, Front, Greasable - A= 3.875", B= .687", 18 Left Hand Thread, Manual Steering. For models 8N, 9N, 2N, NAA, Jubilee, NAB, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881 2000(4 CYL. 1/62 to 12/64), 4000(1/62 to 12/64), . Sold in qty of 2, PRICE IS FOR EACH. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Part No: NAA3270A) $13.40

Drag Link End, Front, Non-Greasable - Sealed, A= 3.875", B= .687", 18 Left Hand Thread, Manual Steering. For models 8N, 9N, 2N, NAA, Jubilee, NAB, 600, 601, 611, 620, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881 2000(4 CYL. 1/62 to 12/64), 4000(1/62 to 12/64), . Sold in qty of 2, PRICE IS FOR EACH. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Part No: NAA3270A-N) $13.40

Drag Link End, Rear - Length 4.250", Diam .687", 18 RH thread. For models 8N, 9N, 2N, 2000 4Cyl 1962-64, 2031, 2120 1963-64, 2131, 4000 1962-63, 4031, 4120, 4131, 600, 601, 611, 620, 630, 631, 640, 650, 651, 660, 661, 671, 681, 800, 801, 811, 820, 821, 840, 850, 860, 861, 871, 881, NAA, NAB. (Part No: NAA33271A) $13.79

Drag Link Tube - LH - Left Hand. 38.5 long, 1 RH thread and 1 LH thread. For NAA, Jubilee, 600, 800, 601, 801, 2000, 4000 (Part No: NAA33315A) $31.52

Drag Link Tube - RH - Right Hand. 36.125 long, 1 RH thread and 1 LH thread. For NAA, Jubilee, 600, 800, 601, 801, 2000, 4000 (Part No: NAA3314B) $26.26

Front Axle Assembly with Bushing - For models 8N, 9N, 2N, NAA, Jubilee, 600, 800, 2000(with Manual 7-57/PS 55), 4000(with Manual 7-57/PS 55). This axle is for models that have a standard front end (NOT for adjustable axle). Replaces NAA3010B2. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: D9NN3010EA) $176.09

Front Axle Support Pin Spacer - 1.783" I.D., 2.023" O.D., .758" L. For models 8N, NAA, Jubilee (1948-1954). (Part No: 8N3024) $6.95

Grommet - Steering column, fits around column at dash. For tractors: NAA, Jubilee {1953-1954}. (Part No: NAA3578B) $13.64

Pin Front Axle - Pin, front axle unthreaded. O.D. 1.743", I.D. 1.310", L 4". For NAA, Jubilee. (Part No: NAA3126B) $29.22

Pitman Arm (LH/RH) - Steering Gear Pitman Arm for models 8N (SN# 216989 and up 1949-1952), NAA, 600, 700, 800, 900, 2000, 4000. Replaces NCA3590A. (Part No: 86542743) $96.53

Power Steering Conversion Kit - For Ford 4 cylinder gas and diesel: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 2000, 4000. Cannot be used with Front End Loaders. Not for RowCrop models. Kit includes all parts necessary for conversion (items shown in picture) including power steering pump, belt & pulley, hydraulic control arm etc. Made in U.S.A. (Part No: S.60305) $1312.91

Power Steering Hose - Single wire braid hose with fittings; 35" long. For 600, 800, NAA (Part No: FPH34) $35.75

Seal, Steering Column - Felt Dust for top of steering column. Tractors: 8N, NAA (1948-1954). (Part No: 8N3570) $3.98

Seal, Steering Gear, Sector Shaft - This is a replacement for the original Packing 8N3581 and the packing retainer 8N3591 on the 8N and NAA. For models 8N SN# above 2616989 1948-1952, (NAA, Jubilee 600, 620, 630, 640, 650, 660, 800, 820, 840, 860, 2000, 4000, all 1953 -1964). (Part No: D5UZ3591B) $11.20

Spindle / King Pin Repair Kit - For 8N, 9N, 2N, NAA, Jubilee. Spindle Repair Kit includes 2 each of: Upper Spindle Seal C5NN3125A, Spindle Top Bushing 2N3109, Spindle Bottom Bushing 2N3109, and Thrust Bearing C0NN3123B. (Part No: S.65986) $35.56

Spindle Bushing - FORD Spindle Bushing - 1.250" I.D., 1.370" O.D., 1.500" Long Fits Models 2N 39-47, 8N 48-52, 9N, NAA 53-54, Jubilee. Sold in MINIMUM QTY of 4, PRICED EACH. (Part No: 2N3109) $5.14

Spindle Nut - Fits on front spindles. Castle Nut 3/4" x 16UNF. Fits: 8N, 9N, 2N, Dexta, Super Dexta, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Part No: 387930S36) $1.60

Spindle Thrust Bearing - For models 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, Dexta, NAA, Jubilee, Super Dexta. (Part No: C0NN3123B) $7.55

Spindle, Front - Right Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3/4 inches with notch on outside and 1/4 inch keyway on inside. Used with Steering Arm #310799, Bushing #2N3109, Wheel Hub #86511582, Thrust Bearing #C0NN3123B, Wheel Bearing Kit #WBKFD1. (Part No: 8N3105B) $86.18

Spindle, Front - Left Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3/4 inches with notch on outside and 1/4 inch keyway on inside. Used with Steering Arm #310799, Bushing #2N3109, Wheel Hub #86511582, Thrust Bearing #C0NN3123B, Wheel Bearing Kit #WBKFD1. (Part No: 8N3106B) $86.18

Spring, steering column bearing. - Spring, steering column bearing. Tractors: without power steering 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Part No: 8N3520) $7.18

Steering Arm - For 4100, 2100, 2600, 3100, 3600, 600, 700, 800, 8N, 900, Dexta, Super Dexta NAA, Jubilee. Steering Arm also replaces 957E3130. (Part No: 310799) $65.79

Steering Arm Dust Seal - For models 2000, 3000, 4000, 600, 800, 8N, 900, NAA. Replaces C5NN3125A. (Part No: 8N3528) $3.00

Steering Column Shim Kit - 2"x .005", 2"x .010", 2"x .020". For models 8N with 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. (Part No: S.61623) $21.08

Steering Gear Assembly - Complete manual steering gear assembly fits: NAA, Jubilee. (Part No: S.67078) $631.31

Steering Gear, Ball Bearing - 3/8" ball, used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For models 8N, NAA, Jubilee. 22 balls required per box, 11 for each bearing, price is per ball. (Part No: S.10903) $0.44

Steering Gear, Double Sector - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For models 8N, NAA, Jubilee. (Part No: S.67671) $63.78

Steering Gear, Inner Race - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For models 8N, NAA, Jubilee. (Part No: S.67672) $9.98

Steering Gear, Outer Race - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For models 8N, NAA, Jubilee. (Part No: S.67673) $20.50

Steering Gear, Pitman Shaft Bushing - For models 8N, NAA 1949-1954. (Part No: 8N3553) $9.50

Steering Gear, Shaft - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For models 8N, NAA, Jubilee. (Part No: S.67668) $127.18

Steering Gear, Single Sector - Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For models 8N, NAA, Jubilee. (Part No: S.67670) $63.78

Steering Sector Kit - 2 Kits used per tractor. Kit conatains Adjuster bolt, nut, washer, o-Rings, shims, felt seal. (Adjuster bolt is allen head type, not slotted like original). For models (8N 50-52), jubilee, NAA, 600, 800, 601, 801, 2000, 4000 all before 1965. (Part No: S.67109) $18.55

Steering Sector Shaft Seal - Felt seal comes in package of 2.Price is for pair. For models NAA, 8N 1948-1954. (Part No: 8N3586) $6.44

Steering Sector, Left Hand - Left Hand steering sector shaft (single gear) 5 tooth. For 8n s/n 216989 and up, NAA, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. Shaft cover must be late style. Replaces OEM #s 251293 and C3NN3526A (Part No: 251293) $153.04

Steering Sector, Right Hand - Sector (Double Gear) 7 tooth. Replaces OEM #s 251294, C3NN3527A (Part No: 251294) $153.04

Steering Shaft & Nut Assembly - For models NAA & Jubilee with Manual Steering. 22 1/2" long. (Part No: NAA3575C) $114.06

Steering Shaft Bearing - For models up to 1964 including: 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000. (Part No: 8N3571-OE) $12.12

Steering Shaft Bearing And Cup Assembly - Replacement for Bearing Type. For models 1948-1964, 8N, NAA, 600, 800. For steering shaft on tractors with manual steering. This is a one piece neoprene bearing that replaces 1 of 8N3552 and 1 of 8N3571. Price is for One (1) assembly - Two (2) assemblies required per steering shaft/top and bottom. (Part No: 8N3571-52) $21.88

Steering Shaft Bearing Cup - For models up to 1964 including: 8N late, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000. (Part No: 8N3552) $9.78

Steering Shaft Bearing and Cup Assembly - QTY 2 - 1-3/4" O.D.. For models 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 3000, 4000. Price is for 2 Sets (2 Bearings and 2 races. 2 sets are required per steering shaft/top and bottom. Replaces 8N3571 and 8N3552. (Part No: 8N3505) $37.95

Steering Shaft Seat & Seal Kit - Upper - For 8N, NAA. This kit contains: 8N3570 Seal (Item 3), 8N3520 Spring (Item 4), 8N3518 Seat (Item 5), 8N3517 Bearing (upper) (Item 6). (Part No: 8N_STRKIT) $29.99

Steering Wheel - 17 5/8" Diameter, 11/16" x 36 Spline Hub - New Style with Covered Spokes. For 8N 1948-1952, NAA, 600, 620, 630, 640, 650, 660, 700, 800, 900, 2000, 4000 (all 4 cylinder engines). NOT LIKE ORIGINAL - Modern version features covered spokes. (Part No: 8N3600PL) $40.00

Steering Wheel Dome Nut Washer - With Beveled edge. For models 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000 (4CYL), 2030, 2111, 2120, 2130. (Part No: 356515S) $3.95

Steering Wheel Nut, Black - Nut, steering wheel ACORN style. 11/16 -20, black. For tractors: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CCBlack) $7.06

Steering Wheel Nut, Chrome - Nut, steering wheel ACORN style. 11/16 -20. CHROME PLATED. For models 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CC) $22.70

Steering Wheel Nut, Unfinished - Steering Wheel Nut - Unfinished - Acorn style nut, 11/16". Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Part No: 351114S) $8.60

Steering Wheel, Splined Hub - Steering wheel OEM style, 17-1/2" diameter, 11/16 inch 36-SPLINE hub. Metal spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA.(R2091) (Part No: 8N3600-OE) $40.00

Tools
Chain Binder - 1/4" chain binder, 2600 pound load limit. (Part No: LL104) $36.74

Chain Binder - 3/8" chain binder, 5400 pound load limt. Use with either 5/16" or 3/8" chain. (Part No: LL105) $41.70

Chain Binder - 1/2" chain binder, 9200 pound load limit. Use with either 3/8" or 1/2" chain. (Part No: LL106) $78.11

Wheels
Bearing Cup, Rear Axle - Bearing, Tapered Cup For 4120, 600, 800, 8N, 9N, 2N, Jubilee, NAA. (Part No: 9N4222) $10.52

Disc - Disc, rear wheel 28" & 32", 8-bolt hub, 6-bolt rim. For 2000, 230A, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 420, 4600, 4610, 515, 530A, 531, 532, 535, 5600, 5700, 600, 6600, 6700, 700, 7600, 7700, 800, 8N, 900, NAA. (Part No: D9NN1036CA) $213.37

Front Rim - Front rim 4.00" x 19", 6-Lug, 4 5/8 inch Pilot Hole, 6 inch bolt circle. For models 8N, NAA, Jubilee, 600, 800. (Part No: C5NN1015A) $72.79

Front Wheel Bearing Kit - For model 9N, 2N 1939-1947, 8N 1948-1952, NAA, Jubilee thru 1954. Kit includes inner Cone(86609936), Inner Cup(86609935), outer Cone(86576860), Outer Cup(86577043), seal(NCA1190A). (Part No: CBPN1200A) $27.95

Front Wheel Cap - For 8N, 9N, 2N, NAA, 501, 600, 700, 800, 900, all 1939 to 1957. Front Wheel Cap. (Part No: 2N1139B) $11.64

Front Wheel Hub - For 8N, NAA. Front Wheel Hub. Uses CBPN1200A Wheel Bearing Kit and stud bolt C5NN1107F. (Part No: 86511582) $52.65

Front Wheel Nut Set, Set of 10 - Sold in quantities of 10, enter 1 for complete set. 1/2"-20 wheel nuts. Fits 8N(late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: C5NN1012B) $11.50

Front Wheel Stud Bolt - Set of 10 - Front wheel stud bolt measures 1/2" X 2".- WITHOUT nuts. Note: Nuts are available by ordering p/n C5NN1012B. Fits 8N(late), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. ** Enter QTY 1, Price is for package of 10. (Part No: C5NN1107F) $16.77

Lug Nut, Rear Wheel - **Must order in quantities of 8, price shown is for 1. 5/8 inch, uses a 1 1/16 inch wrench. Fits the following Models built from 1948 to 1964: 8N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 771, 740, 750, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000, Dexta, Super Dexta. (Part No: 8N1134) $2.16

Rear Rim - 9x28 inch wide base demountable rim with 6 loop clamps. Fits tire size 11.2 x 28. Add $25.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: NCA1020C) $111.04

Rear Rim - Six loop, 10" x 28". For 8N, 9N, 2N, NAA, Jubilee, 600, 800, 900. Replaces NCA1020B. Add additional $25.00 to shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: NCA1020B) $148.75

Rear Rim - Six loop, 11" x 28". For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 900. Add additional $25.00 per rim to shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C5NN1050E) $160.66

Rear Rim - Six loop, 12" x 28". For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 900, 2000, 3000, 4000. Add additional $25.00 to shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R2068) $167

Rear Rim Carriage Head Bolt and Nut - 2.5 length, 5/8 diameter FF Carriage Head Bolt with nuts. UNIVERSAL - verify length. PRICED EACH. **Minimum order is quantity of 6. (Part No: HB250) $3.25

Rear Wheel Center - For 28" & 32" Wheels, 8N, Dexta, NAA, Jubilee, 501, 600, 800, 700, 2000 EARLY, 4000 EARLY. Center has a 4.25 inch pilot hole and mounting bolts are 6 inches across center-to-center. Add additional $10.00 for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C5NN1036D) $240.08

Rear Wheel Rim Bolt - Qty of 1 for a Package of 12. Rear rim center disc to rim bolt, 5/8"-18 x 2-3/4", CGH head. For models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 1801. Order in Qty 1 for a package of 12. (Part No: 370938S36) $27.36

Seal, Front Wheel Hub - Front Wheel Hub Dust Seal. 2 11/16 O.D., 2 inches I.D. Fits, 2000 55-64 USA BUILT, 2N 39-47, 4000 55-64 USA BUILT, 600 55-64 USA BUILT, 700 55-64 USA BUILT, 800 55-64 USA BUILT, 8N 48-52, 900 55-64 USA BUILT, 9N, NAA 53-54.Sold in qty of 2, PRICE IS FOR EACH. Must be ordered in quantities of 2. Can replace 9N1190B. (Part No: NCA1190A) $8.16

Seal, Front Wheel Hub, OEM - Dust seal to original spec. 2.00" I.D., 2-11/16" O.D.. For models 8N, 9N, 2N, NAA, Jubilee all from 1939-53. (Part No: 9N1190B) $8.16

Tire Tube 24 Inch - For 7.5, 8.3, 9.5 x 24 inch tires. (Part No: WHS060) $37.60

Tire Tube 24 Inch - For 11.2, 12.4 x 24 inch tires. (Part No: WHS059) $51.30

Tire Tube 28 Inch - For 11.2, 12.4 x 28 Inch Tires. (Part No: WHS058) $56.55

Tire Tube 28 Inch - For 13.6, 14.9 x 28 Inch Tires. (Part No: WHS061) $79.45

Wheel Hub, Front - Fits 8N, NAA, Jubilee (600, 700, 800, 900 up to SN# 137818 - 1955 to 1956) (Part No: D5NN1104A) $38.99

Wheel Stud, Rear - 5/8 inch -18 thread .690" O.D. on serration, lengh (without head) is 1 15/16 inches. For models 8N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, (4000 1958-1964). Must be ordered in quantities of 8, priced individually. (Part No: 312696) $2.46



Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4" throat, 1/8" dia. rivet punch. (Part No: RIVET_TOOL) $35.25

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8" deep throat x 2-1/8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET) $89.00

Cooling System
Magnetic Block Heater - Universal. 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3/4 inches x 3-3/4 inches, delivers 300-400 degrees surface temperature. (Part No: MBH1153) $56.70

Thermostat Housing to Block Gasket - Tractors: all 4-cyl, 1953-1964, gas and diesel. Sold and Priced as Each. (Part No: EAF8255A) $0.50

ZIP LEAK - INDUSTRIAL RADIATOR STOP LEAK - A PROFESSIONAL STRENGTH STOP LEAK FOR TRUCKS, TRACTORS, CONSTRUCTION EQUIPMENT DESIGNED FOR LARGE HEAVY DUTY COOLING SYSTEMS. 5 oz. Bottle. (Part No: Z14012) $9.99

Decals and Emblems
Decal, Fear This Ford - 12-1/2 x 3. For all Ford tractors. (Part No: S.67825) $18.80

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Part No: SHERMAN) $14.95

Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088) $9.06

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964.***Must be ordered in multiples of 5.*** Priced Each. Not for tractors made overseas, such as Major, Dexta, etc. (Part No: NDA7223A) $5.46

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258) $39.25

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE) $106.29

Battery Thermal Wrap - 60 Watt, 28 inch long wrap to keep your battery warm. (Part No: BTW28) $32.39

Battery Thermal Wrap - 80 Watt, 36 inch long wrap to keep your battery warm. (Part No: BTW36) $34.99

Battery Thermal Wrap - 160 Watt, 36 inch long wrap to keep your battery warm. (Part No: BTW72) $52.64

Coil - Ignition 12V - Universal coil fits many models. Coil is designed to be used on a 12 volt tractor system. (Part No: D5TE12029AB) $23.02

Coil Bracket - Universal Coil Bracket (Part No: R1940) $6.61

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix 'Flame Thrower' heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $33.48

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Not for 9N, 2N early 8N using front mount distributors) (Part No: 40011) $33.48

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Chrome 'Flame Thrower' high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501) $37.62

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001) $37.62

Coil, Ignition 6V - Standard 6 volt coil. Fits many models. (Part No: D4PE12029AA) $19.95

Coil, Ultra High Performance (Black), Oil Filled - Pertronix 'Flame Thrower II' Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011) $36.86

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix 'Flame Thrower II' Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001) $41.48

Generator Repair Kit - For 2 brush generators 8N10001, FAC10002A. (Part No: GRK401) $17.34

Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65) $3.64

Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85) $3.64

Spark Plug Wire Set, 4 Cylinder, Universal - For use with Ignitor high performance electronic ignition conversion kits. (Part No: S.66442) $14.48

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260) $20.02

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. NOTE

Starter, 12 Volt - FOR 3&4-cyl gas tractors (1965 & up, except 5000 5-1971 & up);Gas combines 620, 622, w.5000 tractor engine (1968 to 5-1971). CW rotation, 10-tooth. (Part No: D7NN11001ARXL) $116.37

Engine Gaskets
Push Rod Side Cover Gasket - For all 4 cylinder gas or diesel models built between 1953-1964. (Part No: EAF6521D) $8.38

Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR) $7.14

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 F to +500 F, 3.35 oz. tube. (Part No: PRM77BR) $7.86

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75 F to +700 F, 3 oz. tube. (Part No: PRM101BR) $11.78

Engine Rebuild Kits
Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. Its useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152) $6.71

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Pistons and Sleeves
Piston Groove Cleaner - For pistons up to 5 1/2 inches. Cleans grooves of 5/64, 3/32, 1/8, 5/32 and 3/16. (Part No: B1SB9055) $24.95

Piston Ring Compressor - Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1/2 inches. Range 3 1/2 to 7 inches. (Part No: 900521) $35.67

Ridge Reamer - Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560) $63.87

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stacks - Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 NOTE

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799) $8.94

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800) $9.30

Rain Cap - This rain cap is for a 2.250 inch pipe. (Part No: R1801) $9.64

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802) $9.80

Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: R1804) $10.10

Rain Cap - This rain cap is for a 3.0 inch pipe. (Part No: R1805) $10.56

Rain Cap - This rain cap is for a 3.50 inch pipe. (Part No: R1806) $11.42

Rain Cap - This rain cap is for a 4.00 inch pipe. (Part No: R1807) $13.06

Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2" x 3-1/4". (Part No: S.43231) $9.90

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread dia. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72) $15.22

Filter Screen and Gasket for Sediment Bowl - 1-9/16" O.D.. For models (1958-1964 All with 134" engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172" engines up to 126524), 801, 901, 1801. (Part No: ABC346) $4.99

Fuel Filter, In-Line, 1/4 inch - Inlet 1/4, outlet 1/4, O.D. 1-29/32, length 4-1/16. (Part No: 6511393) $6.92

Fuel Filter, In-Line, 3/8 inch - Inlet 3/8, outlet 3/8, O.D. 1-29/32, length 3-7/8. (Part No: BF836) $6.28

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16, outlet 5/16, O.D. 1-29/32, length 4-5/32. (Part No: BF840) $6.22

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043) $29.99

Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259) $65.00

Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3/8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180) $27.62

Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494) $8.38

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003) $9.97

Sediment Bowl Gasket - 1-9/16" O.D.. For models (1958-1964 All with 134" engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172" engines up to 126524), 801, 901, 1801. (Part No: 311275) $1.99

Gaskets
Gasket Material, Cork Rubber - 3/32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR332) $10.95

Gasket Material, Cork Rubber - 1/16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116) $13.75

Gasket Material, Exhaust Manifold - 1/16" thick x 12" wide x 28-1/2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228) $19.95

Gasket Paper, .0160 - .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844) $14.90

Gasket Paper, .0275 - .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898) $22.90

Gauges
Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type Ammeter. 30 - 30. Black Ring. Replaces FAD10850A. (Part No: A0NN10670A-BLAC) $10.38

Hour Meter - DC voltages from 12V thru 36V nominal. Heavy duty glass-reinforced polyester body. Internal shock shields & grommets protect movement from shock & vibration damage. Fits 2-1/4" opening, three(3) mounting screws with nuts and two(2) blade terminals included. (Part No: HM771) $43.69

Hourmeter, Analog - 2", black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672) $38.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 x 6 ft. copper oil line. Includes 6 Ft 1/8 Line, 2 x 5/16 -24 UNF Nuts, 2x Compression sleeves, and a 1/8-27 NPTF Female to 5/16-24 UNF male adapter. (Part No: UNI523) $22.75

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/8" tube. Brass. (Part No: 919095) $14.35

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/4" tube. Brass. (Part No: IHS626) $14.35

Oil Pressure Gauge Kit, Universal - Universal Complete assembly with oil tube and mounting hardware, Lighted. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002) $15.95

Temperature Gauge - Universal water Temperature gauge(0-280 degree scale). Fits model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 male adapter, engine block or radiator threaded hole. (Part No: 1042944) $23.85

Temperature Gauge, Universal - For 2" mounting hole. Complete assembly with bracket and adapters for block. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77" capillary line. Fits all liquid cooled engines. (Part No: UTG50) $25.30

Voltmeter, 12 Volt, Lighted Dial - Voltmeter-Gauge has 8V to 16V range, lighted dial, fits 2" diameter hole. For tractors that use 12V electrical system. Chrome bezel with black background, white letters and white pointer. (Part No: VOLT12LT) $23.18

Hitch / Drawbar
Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT) $17.62

Check Chain & Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A) $7.96

Drawbar Check Chain Kit - Kit includes: RH / LH anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits Golden Jubilee, Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 8N, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [ 4030, 4130, 4140 (4 cylinder) ], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 531, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B (Part No: NCA596B) $45.09

Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1/2" L Hole Center To Hole Center, 2 1/2" Wide, 1 1/8" Thick (drawbar fits lift between lift arms). (Part No: 9N5182) $40.38

Drawbar, Standard, Red - Drawbar is 1" x 2-1/2" x 26", with 7/8" pins, (Category I). (Part No: 9N5182A) $40.56

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3/16, length 3.75), four(4) of HP-4 (wire dia 5/32, length 2 15/16), four(4) of HP-5 (wire dia 1/8, length 2 9/16), and three(3) of HP-6 (wire dia 3/32, length 1 5/8). (Part No: HPA15X) $6.94

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3/16, length 3.75), four(4) of HP-4 (wire dia 5/32, length 2 15/16), four(4) of HP-5 (wire dia 1/8, length 2 9/16), and three(3) of HP-6 (wire dia 3/32, length 1 5/8). (Part No: HPA15X) $6.94

HITCH BALL 10000LB 2-5/16 - 2-5/16 BALL SIZE, 1-1/4STUD THREAD, 2-1/2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114) $23.85

HITCH BALL 15000LB 2-5/16 - 2-5/16 BALL SIZE, 1-3/8STUD THREAD, 2-5/8 STUD LENGTH, 15000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_) $23.40

HITCH BALL 2000LB - 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834) $12.30

HITCH BALL 3500LB - Hitch ball. 2" ball size, 3/4" stud thread, 1-7/8" stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234) $12.64

HITCH BALL 5000LB - Hitch ball. 2" ball size, 1" stud thread, 2-1/8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21) $14.44

HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5/16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161) $20.52

LINCH PIN - Package of 10 linch pins. Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14) $4.90

LINCH PIN - Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516) $4.00

LINCH PIN - Package of 10 linch pins. 7/16" dia. pin x 1-3/4" useable length, 1-5/8" dia. ring. Enter 1 for package of 10. (Part No: DKLP91) $3.90

LINCH PIN - LINCH PIN Package of 10 linch pins. 3/16" O.D. pin x 1-1/4" Long.***Enter 1 for package of 10** (Part No: DKP316) $3.90

Link End - Plated, forged, 1-1/4" thread, left hand, 1" hole. (Part No: RE1717L) $27.11

Link End - Plated, forged, 1-1/4" thread, right hand, 1" hole. (Part No: RE1718R) $27.11

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8" mounting pins and adapter bushings, 27-1/4" width, 3-1/2"x 3-1/2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101) $284.34

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8" hole dia. (Part No: 230042XHD) $23.80

Stabilizer Pin with nut & lockwasher - Category I. Must order in quantity of two price shown is for one. (Part No: SBP75-WNL) $2.04

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 16 to 24 inches overall. Dichromate plated. (Part No: JSA1012C) $28.34

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1" thick x 2-1/2" width) . Prevents drawbar from rotating. (Part No: 49A29) $26.72

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2) $27.98

Universal Stabilizer Chain Kit - Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch - usually used on larger tractors - VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. (Part No: SK102CH) $47.67

Hydraulic System
Coupler Flange - FORD: Drive flange; 5/8" round bore with set screw 1/4" x 3/8" #SSH4-6. Hydraulics: Drive flange; 5/8" round bore with set screw 1/4" x 3/8" #SSH4-6. 2-1/4" b-b (Part No: L36-6) $75.51

Cylinder Seal Kit, For 2 in. cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2" cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Part No: HSK2002) $18.90

Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Parts) $00.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Part No: HV4030) $719.69

Moreflex Drive Kit - Morflex Series 352 coupler complete with 2 drive flanges(3/4" with key), set screws, 4 bolts & lock nuts. Mounting is four 5/16" holes spaced 2-1/4" apart. (Part No: L601-9) $83.59

Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 dia. shaft. 5/16 dia. bolt holes 2-1/4 on center. For 352 (Part No: L78-13) $39.09

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16-18 O-ring boss with two adapters 9/16-18 ORBM x 1/4 NPTM 90 degree swivel. 3 cylinder bore, 8 stroke length, 26 closed length, 12-7/16 barrel length, 1 rod end diameter, 1-3/4 rod end width, 1 diameter base end. (Part No: HTL3103) $262.85

Implements
AXLE BOLT - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317) $18.22

AXLE NUTS (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH) $1.58

BLADE BOLT KIT - For rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1/8-12 inch, B = 3 1/2 inch, C = 1 3/8 inch, D = 1 inch, E = 9/16 inch, F = 1/2 inch, G = 2 1/2 inch, H = 1.492 (for 1 1/2 Blade Hole), I = 1.12 inches. Contains (BH2500) hardware for 2 blades. (Part No: 63607) $16.66

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH) $2.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22) $8.28

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22) $8.28

Bush Hog Axle Spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40) $6.44

Caster Assembly - Tail wheel & hub assembly with grease fitting and fork assembly uses 1 1/2 Diameter shaft. Shaft on Yoke is 1-1/2" diameter, 8" overall length, 7-1/4" to pin hole. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269) $172.49

Caster Assembly, Old Style - Tail wheel & hub assembly with grease fitting. 4 x 8 inch rim, 15 inch O.D. of wheel. Includes Wheel, Hub, Axle Bearing, and Bolt Assembly.OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215) $103.86

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP) $27.92

HUB with BRG CUPS - 4-bolt, 5" bolt circle & 3-5/8" wheel pivot hub with bearing cups (1" axel)(Ref #5). This part fits Caster Assembly (Part Number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1311) $44.15

Hub Assembly - Hub with bushings (3/4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 with new style 1-1/4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH) $34.53

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129) $40.23

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100) $75.38

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166) $95.34

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162) $98.19

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163) $107.04

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH) $5.20

Tail Wheel Assembly - 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1/2" bolt circle. 5-1/4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294) $125.98

Tail Wheel Assembly - 4" x 8" tail wheel assembly with laminated tire. 3-5/8" pilot, 4 bolt holes, 5" bolt circle, 3-3/4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH) $42.90

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP) $21.27

Lights
Flashing Warning Light - Double Sided Flashing Warning Light with Flasher, with Switch. (Part No: D3NN13R300E11M) $57.48

Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V) $48.63

Headlamp Assembly, 12 Volt - (Single) Head Light Assembly 12-volt, gray - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Part No: L525HG-12V) $30.71

Headlamp Assembly, 12 Volt - (Single) Head Light Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Part No: L525HB-12V) $38.46

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R) $19.56

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG) $41.70

Portable Halogen Work Lamp - 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH) $72.05

Safety Light Amber - 12 volt Amber Safety Light, 4 and a 1/4 dia., 3/8Dia by 5/8 mounting Stud.Does not include Flasher. (Part No: S.61357) $23.90

Sealed Beam Bulb - 12 Volt, 3 Lug Terminal Type. 4-1/2" dia. bulb. (Part No: D6NN13N007A) $26.31

Sealed Beam Bulb, 4-1/2 - Red/white combination work/tail light, 4-1/2" diameter. (Part No: S.52670) $26.98

Tail Light Lens - Plastic 4 in. lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3" apart). Fits tractors 1953 & newer. (Part No: FDV13450A) $16.06

Work Lamp, HID, Flood Light - Universal high intensity discharge flood light, 35W Xenon H3 lamp, size 4.725" W X 4.330" H X 5.512" L, internal ballast, hardened glass lens, far longer life span than halogen 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E) $120.44

Worklight 12 Volt - Red 12 Volt worklight with handle, on/off switch, swivels and rotates. (Part No: S.42792) $29.93

Worklight 12 Volt Black - 12 Volt worklight with handle, on/off switch, swivels and rotates. Mounting Holes measure 4 3.8 center to center. (Part No: S.67771) $31.65

Miscellaneous
An Interview with Harold Brock - Chief designer of the 9N tractor. Hear stories from Brock's earliest days in the Ford Trade School, first encounters with Henry Ford, meeting Thomas Edison and Harry Ferguson, and hear what it was like to be a key member of the team that created the most important tractor in mechanized farming. (Part No: OIC-NN-111) $24.95

CabCAM Camera Observation System - When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD/VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof xtension Cables. (Part No: CC7M1C) $339.62

Canopy - 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X) $402.16

Canopy Mounting Kit, 2 Post - Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603) $70.84

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604) $61.16

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602) $103.07

Canopy, Small Tractors - 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD) $350.00

Deluxe Canopy, 3 Bow - Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R) $220.12

Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X) $145.07

Grease Gun - 3-way fill cartridge gun. (Part No: C3NN17125A) $26.74

HAND CLEANER GALLON - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218) $24.48

Oil System
Lucas Heavy Duty Oil Stabilizer (quart) - A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001) $12.93

PTO / Driveline
Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit is 27mm 1.063 (1-1/16) bearing diameter x 74.6mm 2.940 (2-15/16). 1333mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138) $164.92

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor & implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 round bore with 1/2 pin hole implement yoke. 1300mm - (51 inch) overall length end of yoke to end of yoke. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit, 27mm - 1.063 (1-1/16) bearing dia. x 74.6mm - 2.940 (2-15/16) overall length (43-3/4) . Verify length before ordering. (Part No: AB4111WY) $183.74

Driveline Assembly with Yokes - AB4 series. Complete drive shaft assembly with shielding and tractor & implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-1/4 round bore with pin hole implement yoke. 1350mm (53) overall compressed length end of yoke to end of yoke. Cross and bearing kit, 27mm - 1.063 (1-1/16) bearing dia. x 74.6mm - 2.940 (2-15/16). Overall length 1350mm (53) ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY125R) $181.20

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 - 6 spline Q.D. tractor yoke, 1-3/8 - 6 spline ratcheting torque limiter iwth quick disconnect on implement end. 1372mm (54 inch) overall length end of yoke to end of clutch. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit 27mm -1.063 (1-1/16) earing dia. x 74.6mm - 2.940 (2-15/16). 1372mm (54) overall length ***VERIFY LENGTH BEFORE (Part No: AB4111K33) $278.82

PTO Adapter - PTO adapters are located under the PTO category in the Accessories & Universal Parts section. NOTE

PTO Overide Clutch - Overide Coupler For 1 3/8" Female To 1 3/8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C660F) $44.94

PTO Overide Clutch - Overide Coupler For converting 1 1/8" Male To 1 3/8" Male, (Has 1 1/8" female at one end and 1 3/8" Male at the other)6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C670F) $44.94

PTO Overide Clutch - Overide Coupler For 1 3/8" Female To 1 1/8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C680F) $56.86

PTO Overide Clutch - Overide Coupler For 1 1/8" Female To 1 1/8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C690F) $56.86

PTO Safety Clutch, 40 HP - 1-3/8" 6 spline male and female ends, 6" dia., 40 HP capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164) $210.57

Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250) $24.00

Acrylic Hardener, 16oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 1 to 2 gallons of unreduced paint. (Part No: TP12P) $44.60

Acrylic Hardener, 8oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 2 quarts to 1 gallon of unreduced paint. (Part No: TP12HP) $27.96

Aluminum Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. (Part No: TP402HHSP) $54.68

Black Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. (Part No: TP411HHSP) $54.68

Dakota Prep & Shine, Twin Pack - Kit inlcudes (1) 16.oz bottle Dakota Prep with spray nozzle, (1) 16 oz. aerosol can Dakota Shine, (2) scrub pads (1) light, (1) aggresive. (Part No: DS2PK) $38.48

Dakota Prep, 1 Gallon - Dakota Prep is a water-based and biodegradable cleaner that will remove wax buildup, grease, oxidation and grime from a variety of surfaces to renew paint to its previous luster. It is safe on many surfaces including painted surfaces, decals/vinyl lettering, plastics, fiberglass, clear coat finishes, aluminum, glass and rubber. (Part No: DP1G) $83.37

Dakota Shine, 1 Gallon - Dakota Shine is a unique and patented product that will restore the color, lustre and value to faded and oxidized surfaces like paint, decals, plastics, fiberglass, engine compartments and more. The ingredients are designed to penetrate the surface to rejuvinate the pigments to their original, lime-new appearance. No mixing required, quick dry time and no overspray lines to buff out. Used in conjunction with Dakota prep for best results. (Part No: DS1G) $138.26

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL) $42.53

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT) $24.74

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP) $42.52

Paint, Brownish Medium Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245GAL) $59.24

Paint, Brownish Medium Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245QT) $26.54

Paint, Brownish Medium Gray, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245SP) $51.68

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL) $71.91

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447QT) $29.91

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447SP) $51.68

Paint, Empire Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1963 and up. (Part No: TP360GAL) $42.24

Paint, Empire Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1963 and up. (Part No: TP360QT) $24.74

Paint, Empire Blue, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1963 and up. (Part No: TP360SP) $42.52

Paint, Ford White, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470GAL) $82.43

Paint, Ford White, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470SP) $51.68

Paint, Gloss Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550GAL) $42.24

Paint, Gloss Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550SP) $42.52

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700GAL) $42.24

Paint, Gray Primer, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700QT) $18.69

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700SP) $42.61

Paint, Industrial Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP760GAL) $109.15

Paint, Industrial Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP760LF-QT) $36.65

Paint, Light Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330GAL) $42.53

Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330QT) $24.74

Paint, Light Gray, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330SP) $42.52

Paint, Medium Gray, 1 Gallon - Medium Grey. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240GAL) $42.61

Paint, Medium Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240QT) $24.78

Paint, Medium Gray, Aerosol, 6 Cans - ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability, heat resistant. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240SP) $43.56

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL) $45.50

Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225QT) $25.92

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225SP) $42.52

Paint, Soft Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200GAL) $53.93

Paint, Soft Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200SP) $42.52

Paint, Vibrant Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365GAL) $86.56

Paint, Vibrant Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365QT) $30.83

Paint, Vibrant Blue, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365SP) $51.68

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL) $65.92

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT) $27.81

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT) $95.63

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q) $21.00

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R) $39.95

Seats
Pan Seat, Universal - 17 inch wide Gold zinc plated, 3-1/2" center to center on mounting holes, 1/2" by 1/2" center square. (Part No: B1865) $37.24

Seat Belt, Adjustable - Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22) $36.67

Seat Belt, Universal - Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT) $23.10

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 steel seat pans. (Part No: 8N401BLK) $38.67

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V) $1294.75

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056) $1405.98

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056) $1405.98

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3/4" D). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY) $98.77

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. (Part No: TS1050ATSP) $101.46

Seat, Universal - BLUE Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. (Part No: TS1060ATSP) $93.40

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP) $93.40

Seat, Universal - Seat assembly, Black leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before purchasing. Weight 33 lbs. (Part No: TS1110BK) $106.23

Seat, Universal - Seat assembly, Blue leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BL) $109.62

Seat, Universal - Seat assembly, Yellow leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110YL) $106.23

Seat, Universal INDUSTRIAL with SLIDES - Seat, universal, non-suspension style seat assembly with slide track for forward/rear adjustment. Slotted base for adjusting slide tracks side to side 4" to 10-1/4". Black leatherette upholstery, vacuum formed and watertight for use in all weather conditions. (Part No: TS1036IND) $70.15

Tie-On Seat Cover - Blue & White, 19" wide. Deluxe with 2 inches of foam. (Part No: R1013) $30.00

Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015) $172.58

Universal Seat - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Part No: TS1040ATSP) $97.65

Sheet Metal / Body Parts
2 Hour DVD - The How To's of Sheetmetal Repair - This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD) $24.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140) $30.09

DZUS Fasteners Kit - Universal Set of 5 fasteners. 1/4 Turn Fasteners. For 13/32 inch holes, Head Diameter is 11/16, springs are 1 7/8 inch in length. Verify size before ordering. (Part No: DZUS2) $16.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, and 1/2. (Part No: RPD112K) $138.96

Toolbox - Universal Toolbox 15 1/2" X 4 3/4" X 4 1/4". Comes Primed ready to prep and paint. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R2685) $29.40

Toolbox, Fender Mount - This is an aftermarket toolbox designed to mount easily on the fender of most agricultural and industrial tractors. This is an aftermarket item, unlike any original toolboxes, and is meant for working tractors in need of a good toolbox. 18 inches long, 3-5/8" wide and 4-1/2" deep. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: TB100FM) $43.86

Weather Brake - By Femco, Inc. We have Custom and Universal for hundreds of models. Helps fight cold wind. Installs Easily and Quickly. Heavy Vinyl Cover, Adjustable window flaps, Heavy Gauge Steel Frame, Big 3-Section Window. Custom Fit are $449. Universal are $299. Shipping is $35. 2 Month limited warranty. 30 day return policy. CALL TO ORDER 800-853-2651. (Part No: WEATHERBRAKE) $0.00

Steering
Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Part No: WSV125A) $85.71

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Part No: R3275) $10.00

Steering Wheel Spinner, Black - Comes with mounting hardware. (Part No: R3276) $11.70

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Part No: R3279) $11.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Part No: R3278) $11.70

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Part No: R6323) $11.70

Steering Wheel Spinner, Red - Comes with mounting hardware. (Part No: R3277) $11.70

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Part No: R3280) $11.70

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16" x 5/8" x 5/8", 1 15/16" x 3/4", 3/4", and 1 3/8" x 1" x 1/2". (Part No: TIERODBOOTS) $15.30

Tools
*Combination Wrench Set - 22 pieces SAE/Metric. Polished chrome vanadium steel. Metric: 9, thru 19 mm. SAE: 1/4 thru 7/8. Comes with a durable plastic rack for handy storage. LIFE TIME UNLIMITED WARRANTY. (Part No: W1069) $29.99

Adjustable Cylinder Hone Replacement Stones, Coarse - Set of three 4" coarse textured stones with cotter pins for 900542 cylinder hone. (Part No: 900563) $17.48

Adjustable Cylinder Hone Replacement Stones, Fine - Set of three 4" fine textured stones with cotter pins for 900542 cylinder hone. (Part No: 900556) $17.48

Adjustable Cylinder Hone Replacement Stones, Medium - Set of three 4" medium textured stones with cotter pins for 900542 cylinder hone. (Part No: 900549) $17.48

Adjustable Engine Cylinder Hone - Resurfaces cylinder walls so new rings will seat and eliminate minor cylinder wall imperfections. 2" to 7" diameter range with adjustable tension settings to control the cutting action. Features flexible shaft that will fit any variable speed drill and replaceable 4" stones. Medium texture stones included. Stone replacement part numbers are (900556)Fine textured stones, (900549) medium textured stones and (900563) coarse stones. (Part No: 900542) $38.37

Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891) $19.95

Chain Binder - 1/4" chain binder, 2600 pound load limit. (Part No: LL104) $36.74

Chain Binder - 3/8" chain binder, 5400 pound load limt. Use with either 5/16" or 3/8" chain. (Part No: LL105) $41.70

Chain Binder - 1/2" chain binder, 9200 pound load limit. Use with either 3/8" or 1/2" chain. (Part No: LL106) $78.11

Combination Wrench Set - 11 pieces. Sae sizes 1/4 to 7/8. Chrome vanadium steel construction. Handy storage rack. LIFETIME UNCONDITIONAL WARRANTY. (Part No: W1061) $21.00

Compression Tester - Checks cylinder compression up to 300 PSI. Fits 14 and 18mm spark plug threads. Equipped with air-hold valve and gauge reset button. 11 inch flexible rubber hose. Complete with instructions. (Part No: W80579) $32.48

Cotter Pin Assortment - 150 Pieces. Contains sizes of 1/8x2, 5/32x2 1/2, 3/16 x 3, 1/4 x 2, 1/4 x 3, 5/16 x 2 1/2. All in a convenient re-sealable plastic case. (Part No: W5206) $12.48

Cotter Pin Assortment, Small - 560 piece assortment of 1/16" x 1", 3/32" x 1", 3/32" x 1-1/2", 1/8" x 1-1/4", 1/8" x 2", 5/32" x 2-1/2" all in convenient re-sealable plastic case. (Part No: W5205) $9.40

Diesel Compression Test Kit - Complete kit with case. 0 to 1000 PSI Gauge (0-700kPA). Includes 9 adapters for popular Domestic, Asian and European vehicles. Will fit the following thread sizes: 24 x 2.00, 12 x 1.25, 10 x 1.25, 10 x 1. Tests compresssion through both flow plug and injector holes. Gauge accuracy +/- 2 percent. (Part No: W89731) $59.95

Digital Calipers, Stainless - High quality hardened stainless steel digital caliper. calculates measurements up to 6" with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6) $36.11

GREASE GUN - GREASE GUN-Pistol handle grease gun uses standard 11" grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121) $28.88

GREASE GUN - Spring fed 11" barrel grease gun. Uses standard 11" grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080) $26.74

GREASE GUN - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142) $35.16

GREASE GUN CLAMP - Clamp holds all 2-1/4" diameter barrel hand guns. Bolts or screws anywhere thru hole in bracket base. (Part No: GC102) $12.44

GREASE GUN POWERLUBER 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401) $109.95

GREASE GUN POWERLUBER 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B) $270.05

GREASE GUN POWERLUBER 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B) $376.87

GREASE HOSE 12 INCH - 12 flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G115) $10.86

GREASE HOSE 18 INCH - 18" flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G118) $9.90

Hair Pin Assortment - 150 pieces. Includes 6 different sizes from 1 3/16 Length to 2 15/16. All in a convenient re-sealable plastic case. (Part No: W5210) $8.32

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S.58474) $249.90

Hobby Tool Kit - With Carrying Case. Complete Knife kit with two handle styles. Also comes with 3 inch caliper, tweezers, precision screwdriver and 28 blades. (Part No: W1709) $23.74

Hose Clamps Assortment - 26 pieces. Includes sizes of: 5/8, 7/8, 1, 1 1/16, 1 1/4, 1 1/2 inch. All in a convenient re-sealable plastic case. (Part No: W5348) $8.06

MULTI TESTER - Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420) $24.76

Main Seal Installer/Remover - Removes and installs upper rear main seals on many engines without removing engine or crankshaft. Contains corkscrew removal tool, T-handle and wire with clip for pulling new seals into place, 2 extra clips. (Part No: W84019) $7.10

O-Ring Assortment - 407 pieces. Includes 32 sizes from 1/4 O.D to 2 1/4 O.D. All in a convenient re-sealable plastic case. (Part No: W5202) $16.36

Piston Ring Compressor - Use to install pistons. Positive compression and adjustable friction brake. Includes instructions. Band diameter from 3.5 to 7 inches (88 to 177mm). (Part No: W80573) $18.12

Piston Ring Groove Cleaner - Cleans carbon and deposits from ring grooves. Includes two 5 cutter wheels for a total of 10 groove cleaning sizes: SAE: 1/16, 5/64, 3/32, 3/16 and 1/4. Metric: 1.5, 1.75 and 2 mm. (Part No: W80576) $18.26

Rotary Tool Kit - 80 Pieces. Hand held rotary tool. Turns at 1600 rpm. Contains cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone and drill bits. Great for cutting, grinding, polishing, sharpening and drilling. (Part No: W50083) $19.00

Rubber Grommet Assortment - 125 pieces in 18 various sizes from 1/8 x 9/32 to 1 inch. All in a convenient re-sealable plastic case. (Part No: W5214) $9.38

Screwdriver Set - 30 pieces. Contains 7 screwdrivers 1/4 to 6 inch, a magnetic bit driver, 6 precision screwdrivers, 14 power bits. All contained in a Plastic Rack (Part No: W1718) $23.08

Spring Assortment - 200 pieces. Includes compression type sizes from 9/32 x 1/2 to 7/32 x 1 1/2, extension type from 13/64 x 13/16 to 11/32 x 1 7/16. (Part No: W5200) $7.98

Step Drill Bit Set - 3 Pieces. Titanium Nitride Coated high speed steel. 1/4 inch shank. Drills holes up to 1 inch. For use with metal, wood or plastic. Starts on contact, no center punch required. Automatically deburrs holes as you drill. (Part No: W9003) $17.20

T-Handle Hex Key Set - 10 Pieces (SAE). High quality carbon steel shafts. Black oxide finish resists corrosion. PVC T-handle grips for added torque and comfort. Sizes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8 inch. Comes with hand storage rack (mountable). (Part No: W80274) $19.94

Torque Wrench - Micrometer 1/2 inch drive adjustable torque wrench. Chrome plated alloy steel. Reversible ratchet head. SAE and Metric Scale. 10 to 150 lb torque range. 1 lb graduations. (Part No: M200DB) $34.40

Valve Spring Tool - Compresses springs without removing head. Adjustable cam handle keeps tool correctly adjusted for entire job. Remove lever and turn with socket in confined areas. (Part No: W80567) $31.24

WIRE STRIPPER 4-WAY - 4-way wire stripper/crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223) $9.88

Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003) $37.50

Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002) $129.95

Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004) $119.95

Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001) $149.95

Winch Set, 3500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0005) $129.95

Wire Terminal Assortment - 160 piece set. Contains 19 popular sizes and types of wire terminals. All in a convenient re-sealable plastic case. (Part No: W5213) $15.48

Woodruff Key Assortment - 80 pieces. Includes 10 each of: 3x5x13 mm, 3x6.5x16 mm, 4x5x13 mm, 4x6.5x16 mm, 4x7.5x19 mm, 5x7.5x19 mm, 5x9x22 mm, 6x9x22 mm. All in a convenient re-sealable plastic case. (Part No: W5341) $11.26

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
Front Tractor Tires - We are now offering Front Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. NOTE

Power Adjust Rim - 11x28, 4-rail type. For double ramp clamp. Holes in rail for stop body screw are drilled parallel to axle (not at angle). Use with stop body C0NN1057A, stop body screw C0NN1058A, clamp E5NN1043AA. Fits tire size 12.4 x 28, 13.6 x 28. Add additional $25.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Verify OEM Part # before ordering. (Part No: C5NN1050H) $370.47

Rear Tractor Tires - We are now offering Rear Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. NOTE

Stop Body - For the Power Adjust Rim on tractors 2000, 3000, 4140, (10-1968 ot 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 TO -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 503676M1. Must be ordered in multiples of 2, priced each. (Part No: C0NN1057A) $28.70

TIRE GAUGE - Gauge has special oiling & pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350) $15.48

TIRE GAUGE DIAL - Precision bourdon tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG) $17.16

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Brass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599) $42.82

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R) $39.95

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q) $21.00

Tire Tube 32 Inch - For 9.5 x 32 Inch Tires. (Part No: WHS062) $56.95

Tire Tube 38 Inch - For 11.2, 12.4 x 38 Inch Tires. (Part No: WHS064) $65.25

Tire Valve Fluid Adapter - For ballast. (Part No: S.61167) $27.90

Tire and Tube - 400x12 3 Rib Tire with tube. (Part No: 400x12-3) $74.22

Wheel Clamp - Disc to rim. Double ramp type for power adjustable rims. For 28" rim on tractors 2000, 3000, 4140, (10-1968 ot 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 TO -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241. (Part No: E5NN1043AA) $23.82

Wheel Rim Stop Body Screw - Use with power adjust rims PAR10X28 and C5NN1050J and C5NN1050H. For tractors 2000, 3000, 4140, (10-1968 ot 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 TO -). MUST be ordered in multiples of 2, price is for 1. (Part No: C0NN1058A) $13.00

Show CategoriesShow all NAA Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
Ford NAA Manuals
NAA, Golden Jubilee - This manual covers (in depth) Engine, Transmission, & Hydraulics ONLY - Service Manual 42 Pages (Part No: 53-NAASM) $17.95

NAA, Golden Jubilee I&T Aftermarket Shop Manual 48 Pages (Part No: FO-19) $26.95

NAA - For Year 1952, SN# 1 to 2379 Parts Manual 228 Pages (Part No: 39-FTMPC) $29.95

NAA, Golden Jubilee Operators Manual 98 Pages (Part No: FO-O-NAA) $16.95

NAA, Golden Jubilee, Accessories Only - Hyd Outlets, Auxilary Lights, Live PTO, Etc Parts Manual 58 Pages (Part No: FO_ACCESS_PT) $14.95

NAA, Golden Jubilee Sherman 1400 Loader Parts Manual 22 Pages (Part No: FO-P-1400 SHER) $20.95

NAA, Golden Jubilee Sherman 54F Backhoe Parts Manual 38 Pages (Part No: FO-P-SHER 54F+) $20.95

NAA, Golden Jubilee Sherman C-8 Backhoe Parts Manual 60 Pages (Part No: FO-P-C8 BKHOE) $20.95

NAA, Golden Jubilee Sherman F-8 Backhoe Parts Manual 38 Pages (Part No: FO-P-SHER 54F+) $20.95

NAA, Golden Jubilee Sherman F-9 Backhoe Parts Manual 78 Pages (Part No: FO_SHERF9 BH_PT) $19.95

NAA, Golden Jubilee Sherman Transmission - Over-Under Tran, Forward-Reversing Tran, Live PTO Kit Service Manual 42 Pages (Part No: FO_SHERTRAN_SV) $14.95

Wagner Loader - Mounts on 2N, 8N, 9N, NAA, Golden Jubilee, 600, 800, Fordson Major Parts Manual 476 Pages (Part No: IH-P-WAGNER) $68.95

NAA - Works for Years 1953 thru 1959 Parts Manual 303 Pages (Part No: 53-FTMPC) $23.95

Miscellaneous Related Items
Literature
Ford Jubilee Tractor NAA Color Sales Brochure - Covers new improvements for the Golden Jubilee / NAA tractor. (Part No: BR-8) $7.00

Tune-up DVD
Ford NAA, Jubilee, 600, 700, 800 & 900 Series, and the 2000 & 4000 (4-cyl) - Includes rebuilding the carburetor and distributor, oil and filter change, brake adjustment, troubleshooting and more. Step-by-step instructions. (Part No: JDV-01450) $24.00

Rebuild DVD
Ford NAA, Jubilee, 600, 700, 800 & 900 Series, and the 2000 & 4000 (4-cyl) - Shows how to completely rebuild the tractor's engine. You'll see the engine disassembled down to the bare block and then rebuilt step-by-step in an easy-to-follow format. (Part No: JDV-01350) $24.00

Misc Repair DVD
Ford Hydraulic Repair DVD - Features the Ford Golden Jubilee (NAA), 600, 700, 800 and 900 Series with information pertaining to the 2000 & 4000 with 4-cylinder engines. If your tractor's hydraulics shake, operate slowly or perhaps don't work at all, this video will show you how to make the necessary repairs or adjustments or rebuild the hydraulic pump. (Part No: JDV-01550) $24.00

Hat
Ford 8N hat - Tractor is embroidered on the hat with words 'Ford 8N' (Part No: FD8N) $19.95

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

[Show Categories]   [Show all Ford Models]   [Printer Friendly]  





PayPal


Customer Service
Monday - Friday
10:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure

  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2014 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.