(800) 853-2651   Cart  View Cart    
Low Prices, Fast Shipping

 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

Minneapolis Moline
[ Turn Off Pictures ]
 
Brakes
Brake Actuating Assembly
- For models Jet Star, M5, M504, M602, M604, M670, M670 Super, 5 Star. (Part No: 10P850)
$164.98 [Enlarge Picture]

Brake Actuating Spring
- Used with disc brakes. For models GB, GTB, GVI, M5, M602, M670, 5 Star, G705, 2 Star. Replaces A30897, A41816. Sold in Qty's of 2, Priced each. (Part No: A155624)
$8.62 [Enlarge Picture]

Brake Actuator Disc
- For model G750 SN# 147569 and up. (Part No: 10P3140)
$83.62 [Enlarge Picture]

Brake Adjuster Disc, Primary
- For models G1355, G955. (Part No: 303073246)
$86.35 [Enlarge Picture]

Brake Disc, Bonded
- 7.00" O.D., 3.00" I.D., 24 spline. For models M5, M504, M602, M604, M670, M670 Super. (Part No: 70277355)
$36.13 [Enlarge Picture]

Brake Disc, Bonded
- 8.00" O.D., 5.00" I.D., 21 spline hub, fits 2.750" shaft dia. For models G955, G1355. (Part No: 303135241)
$24.72 [Enlarge Picture]

Brake Piston
- 7.2450" dis. For models G955, G1355. (Part No: 303062864)
$81.50 [Enlarge Picture]

Brake Rivet Tool
- Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1 4" throat, 1 8" dia. rivet punch. (Part No: RIVET_TOOL)
$35.25 [Enlarge Picture]

Brake Rivet Tool, Large
- Larger version of our Brake rivet tool. 3-3 8" deep throat x 2-1 8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$89.00 [Enlarge Picture]

Brake Separator Plate
- For models G1355, G955. (Part No: 168487A)
$51.76 [Enlarge Picture]

 
Clutch
Clutch Bearing Carrier
- Non greasable. For model G750 SN# 147569 and up. (Part No: 303057364)
$106.30 [Enlarge Picture]

Clutch Housing Tube
- For model G750. (Part No: K585)
$22.83 [Enlarge Picture]

Clutch Release Bearing - For models UTL, 445, BigMo 400, BigMo 500, BigMo 600, Jetstar 3, Super Jetstar 3, Jetstar 4, Super Jetstar 4, U302, M602, M604, M670, Super M670, G900, G950, G1000, G1000 Vista, G1050, G1350. (Part No: 10A21384)$41.01

Clutch Shaft
- 24.06" long, 27 spline. For models G1355, G955. (Part No: 303081990)
$309.11 [Enlarge Picture]

Clutch Shaft - 12.25" long, 19 spline. For model G750 SN# 147569 and up without hydra power or creeper drive. (Part No: 155067A)$283.18

Release Bearing Fork
- Fork for Models: G1355, (G750 SN# 147569 and up), G955. Replaces 101510A. (Part No: 72160045)
$104.64 [Enlarge Picture]

Transmission Plate, Driving
- Used with over under hyd. shift, 5.900" O.D., 4.63" I.D., 34 teeth. For models G1355, G955. Replaces 303061809, 303368483, 303088200. (Part No: 303309487)
$13.47 [Enlarge Picture]

 
Cooling System
Fan & Alt. Belt
- For model G1000. (Part No: TP-A4287R)
$24.56 [Enlarge Picture]

Fan Belt
- For models 5 Star, M5, M602, M604. (Part No: 147849)
$21.06 [Enlarge Picture]

Fan, 4 Blade
- 20" dia., 1-1 8" pilot hole, mounting holes on 1-3 4" centers. For models (G900, G950, G955 all gas), (Super Jet Star 5), M5, M504, M602, M604, M670, M670 Super. (Part No: 10A20426)
$63.64 [Enlarge Picture]

Fan, 6 Blade
- 20" dia., 1-5 8" pilot hole, mounting holes on 1-3 4" centers. For models G1000, G1050, G1350, (G1355 SN# 236440 to 252217), (G900, G950 diesel), G955. (Part No: 10A21815)
$62.88 [Enlarge Picture]

Magnetic Block Heater - Universal. 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3 4 inches x 3-3 4 inches, delivers 300-400 degrees surface temperature. (Part No: MBH1153)$56.70

Radiator
- 2" inlet, 2-1 8" outlet may need to make hose adaptations for some tractors. For model G750. (Part No: R5089)
$548.10 [Enlarge Picture]

Radiator Core
- Core only. 16-1 2" in height, 16-1 2" in width, 2-1 8" in depth. Top and bottom headers 4-1 8"x 19" with 1-3 8" overhang, 20 bolt holes per header plate. For models AZE, ZA, ZAN, ZAS, ZAU, ZB. (Part No: NRTB6339)
$435.71 [Enlarge Picture]

Radiator Hose, Lower
- 1.625" I.D.. For models 445, Jet Star 4, Jet Star 4 Super all gas or diesel engines. (Part No: 10A7815)
$22.85 [Enlarge Picture]

Radiator Hose, Lower
- A= 2.0", B= 1.625", overall length 7.00". For models M5, M504, M602, M604, (G900 gas or diesel), (M670, M670 Super gas LP SN# 29901892 and up, dsl SN# 300008200 and up). (Part No: 10A9932)
$16.94 [Enlarge Picture]

Radiator Hose, Lower
- A= 2.00", overall length 13".. For models: (M670 Super gas lp SN# up to 29901891, diesel SN# up to 30000819). (Part No: 10A27664)
$11.52 [Enlarge Picture]

Radiator Hose, Lower
- 1.625" I.D.. For models Jet Star 3, Jet Star 3 Super. (Part No: 10A20054)
$21.80 [Enlarge Picture]

Radiator Hose, Upper
- 1.687" I.D.. For models Super Jet Star 5, M5, M504, M602, M604. (Part No: 10A9584)
$17.90 [Enlarge Picture]

Radiator Hose, Upper
- 1.625" I.D.. For models (M670, M670 Super SN# up to 29901891, dsl SN# up to 30000819). (Part No: 10A22503)
$10.42 [Enlarge Picture]

Radiator Hose, Upper
- 1.625" I.D.. For models (335 gas), (445, Jet Star 4, Jet Star 4 Super gas or diesel). (Part No: 10A7294)
$8.28 [Enlarge Picture]

Radiator Hose, Upper
- A= 1.625". For models (M670, M670 Super gas lp SN# 29901892 and up, dsl SN# 30000820 and up). (Part No: 10A23896)
$15.42 [Enlarge Picture]

Radiator Hose, Upper
- A= 1.750", B= 1.375". For models Jet Star 3, Jet Star 3 Super. (Part No: 10A21032)
$11.46 [Enlarge Picture]

Thermostat, 180 Degree - For models BF, BG, G, GB, GBT, M5, R, U, Z. (Part No: R2224)$16.50

Water Pump
- For models G1050, G1350, (G955 with 425 gas & 451 diesel engine), (G1355, G950 all with 504 engine). (Part No: 10B30457)
$185.85 [Enlarge Picture]

Water Pump without pulley
- Casting # 10A7667. For models (335 with 165A engine), (445 with 206H & D206-4 engine), (Jet Star, Jet Star 3, Jet Star 4 all with 206L-4 & D206L-4 engines). (Part No: 10R1076)
$111.80 [Enlarge Picture]

 
Decals and Emblems
Decal Set
- Decal Set - For GVI, Red. Decal Set. Printed on Vinyl. (Part No: MMGVIR)
$29.99 [Enlarge Picture]

Decal Set - Red Letter Die cut. Complete set. (Part No: R1387V)$87.48

Decal Set - Complete set for Avery V Small Gold tractor. Printed on Vinyl. (Part No: R3951)$71.82

Decal Set - For 445. Complete Decal Set. Printed on Vinyl. (Part No: R2586)$56.50

Decal Set - For 4 Star. Complete Decal Set - BLACK Printed on Vinyl. (Part No: R1925)$39.53

Decal Set - For 4 Star. Complete Decal Set - RED. Printed on Vinyl. (Part No: R1924)$39.53

Decal Set - For 5 Star. Complete Decal Set - Black. Printed on Vinyl. (Part No: MMS5S)$29.99

Decal Set - For 5 Star. Complete Decal Set - RED. Printed on Vinyl. (Part No: R1391)$36.00

Decal Set - For BG. COMPLETE Decal Set. Printed on Vinyl. (Part No: R3957)$83.16

Decal Set
- For model G, Gas. COMPLETE Decal Set. Printed on Vinyl. (Part No: MMG)
$29.99 [Enlarge Picture]

Decal Set - For G Diesel. Decal Set - HOOD ONLY. Printed on Vinyl. (Part No: R4326)$60.68

Decal Set - For U. Complete Decal Set, 8 Pieces. Printed on Vinyl. (Part No: MMU)$29.99

Decal Set - Complete set for U302. Printed on Vinyl. (Part No: R3500)$83.16

Decal Set - For UB. Decal Set. Printed on Vinyl. (Part No: MMUB)$29.99

Decal Set - Complete set for UB Diesel. Printed on Vinyl. (Part No: R1392)$43.94

Decal Set - Complete set for UB Special. Printed on Vinyl. (Part No: R1393)$43.94

Decal Set - Complete set for UBU. Printed on Vinyl. (Part No: R3953)$58.59

Decal Set
- For UTS. Decal Set. Printed on Vinyl. (Part No: R3954)
$58.59 [Enlarge Picture]

Decal Set - Complete set for UTU. Printed on Vinyl. (Part No: R2581)$58.59

Decal Set
- For Z. Decal Set. Printed on Vinyl. (Part No: MMZ)
$29.99 [Enlarge Picture]

Decal Set - Complete set for ZA. Printed on Vinyl. (Part No: R4328)$58.59

Decal Set - Complete set for ZAI. Printed on Vinyl. (Part No: R3955)$58.59

Decal Set - Complete set for ZAS. Printed on vinyl. (Part No: R3956)$58.59

Decal Set - For ZB. Decal Set. Printed on Vinyl. (Part No: MMZB)$39.17

Decal Set - Complete set for ZTU. Printed on Vinyl. (Part No: R2582)$58.59

Decal Set - Complete for GB. Printed on Vinyl. (Part No: R1383)$42.00

Decal Set - Complete for GB with Wide Fenders. Printed on Vinyl. (Part No: R2583)$54.41

Decal Set - Complete for GB Diesel. Printed on Vinyl. (Part No: R1384)$48.13

Decal Set - Complete for GB Diesel With Wide Fenders. Printed on Vinyl. (Part No: R2584)$69.05

Decal Set - Complete for GTS. Printed on Vinyl. (Part No: R3952)$58.59

Decal Set - For GVI, Black. Decal Set. Printed on Vinyl. (Part No: MMGVIB)$29.99

Decal Set - Complete for GVI, Red. Made of Vinyl. (Part No: R1385V)$87.48

Decal Set - Complete for G704 gas, Red. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3507)$83.16

Decal Set - Complete for G705 gas, Slanted Lettering. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3508)$75.60

Decal Set - Complete for G705 gas, Straight Lettering. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3509)$85.05

Decal Set - Complete for G706 gas, Slanted Lettering. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3510)$75.60

Decal Set - Complete for G706 gas, Straight Lettering. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3511)$85.05

Decal Set - Complete for G707 gas. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3512)$109.62

Decal Set - Complete for G708 gas. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3513)$109.62

Decal Set - Complete for G900 gas. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3514)$75.41

Decal Set - Complete for G950 gas. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3518)$79.38

Decal Set - Complete for G955 gas. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3521)$69.93

Decal Set - Complete for G1000 gas. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3515)$75.41

Decal Set - Complete for G1000 Vista. Decal Set. Printed on Vinyl. GAS. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3517)$116.71

Decal Set - Complete for G1000 Wheatland Gas. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3516)$75.41

Decal Set - Complete for G1050 Gas. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3519)$79.38

Decal Set - Complete for G1350 gas. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3520)$79.38

Decal Set - Complete for G1355 gas. Decal Set. Printed on Vinyl. If you have a DIESEL, you need to order this set and the 3 Piece Diesel Set, Part #R3958. (Part No: R3522)$69.93

Decal Set - Complete for Jetstar. Gold Decal Set. Printed on Vinyl. (Part No: R2587)$90.72

Decal Set - Complete for Jetstar 3, Early with Lines. Decal Set. Printed on Vinyl. (Part No: R3497)$81.27

Decal Set - Complete for Jetstar 2, Black. Decal Set. Printed on Vinyl. (Part No: R2588)$90.72

Decal Set
- For M5, Black. Decal Set. Printed on Vinyl. (Part No: MMM5B)
$29.99 [Enlarge Picture]

Decal Set - For M5, Red. Decal Set. Printed on Vinyl. (Part No: MMM5R)$36.00

Decal Set - Complete for M602, 46 inch Hood Decal. Printed on Vinyl. (Part No: R3503)$83.16

Decal Set - Complete set for M602, 50 inch Hood Decal. Printed on Vinyl. (Part No: R3502)$95.16

Decal Set - Complete for M604. Printed on Vinyl. (Part No: R3504)$83.16

Decal Set - Complete for M670. Printed on Vinyl. (Part No: R3505)$86.94

Decal Set
- For R. Decal Set. Printed on Vinyl. (Part No: MMR)
$29.99 [Enlarge Picture]

Decal Set - For RTU. Decal Set. This is a vinyl-cut set (Part No: R4327)$120.96

Decal Set - For Super 4 Star, Black Decal Set. Printed on Vinyl. (Part No: MMS4S)$29.99

Decal Set - For Super 4 Star, Red Decal Set. Printed on Vinyl. (Part No: MMS4SR)$29.99

Decal Set - Complete for Super Jetstar 3. Printed on Vinyl. (Part No: R3499)$81.27

Decal Set - Complete for Super M670. Printed on Vinyl. (Part No: R3506)$79.38

Decal Set - Complete for Super U302. Printed on Vinyl. (Part No: R3501)$71.82

Decal Set, Complete - For model BF. (Part No: R2339)$35.34

Decal Set, Complete - Black vinyl. For model G704 with diesel engine. (Part No: R2345)$82.59

Decal Set. - For 335. Complete Decal Set. Printed on Vinyl. (Part No: R2585)$56.50

Diesel Decal Set - This is a supplement set which only includes the 3 Diesel specific decals for this model. The main set is listed in this section. (Part No: R3958)$15.50

MM Logo Decal - "Power Implement Company", 4" x 7", printed on vinyl. (Part No: R5193)$26.60

MM Logo Decal
- 1 2" x 1", printed on vinyl. (Part No: R5238)
$4.66 [Enlarge Picture]

 
Drive Train
Ampli Torc Driven Plate
- 6.00" dia. For models Jet Star 3, Jet Star 4, M5, M504, M602, M604, M670, M670 Super, Jet Star Orchard, 335. (Part No: 207000653)
$35.63 [Enlarge Picture]

Gear Shift Boot
- For models 3 Star, Jet Star 3, M670, G900, G1000, G1050, G1350. (Part No: 10A19825)
$21.00 [Enlarge Picture]

Gear, Transmission Input Shaft, Front
- 19 teeth, 25 spline. For model G750 SN# 147569 and up. (Part No: 107303A)
$263.44 [Enlarge Picture]

Lucas Hub Oil (quart)
- Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$9.06 [Enlarge Picture]

Thrust Washer
- Transmission input shaft. For model G750 SN# 147569 and up. (Part No: 155100A)
$25.90 [Enlarge Picture]

Transmission Input Shaft
- 12.50" long, 30 spline, 18 teeth. For models G1355, G955. (Part No: 303084876)
$150.64 [Enlarge Picture]

Transmission Input Shaft, Drive Collar
- 25 teeth, 25 spline. For model G750 SN# 147569 and up. (Part No: 107266A)
$165.38 [Enlarge Picture]

 
Electrical System
(Starters, Generators, Coils, Wiring, etc.)
Alternator
- 12 volt, 55 amp. For models (G900 1966-68 with 425 gas or 451 dsl), (G1000 1965-69 with 504 gas, LPG or dsl), (Jetstar 3 1967-69 with 206 dsl or 220 gas LPG), (M670, M670 Super 1965-68 with 336 gas, LPG or dsl), (U302 1965-69 with 220 gas LPG. Replaces 1100805, 1100771. (Part No: ADR0231)
$112.33 [Enlarge Picture]

Alternator
- 12 volt, 63 amp.3 pin. Will replace a 2 pin as the 3rd pin is an accessory. For models (G955 1972-74 with 451 gas dsl), (G1055 1972-74 with 504 dsl), (G1355 1972-74 with 585 dsl). Replaces 110581. (Part No: ADR0239)
$79.33 [Enlarge Picture]

Alternator Base Bracket Kit - Universal
- Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258)
$39.25 [Enlarge Picture]

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)$87.73

Coil Bracket
- Universal Coil Bracket (Part No: R1940)
$6.61 [Enlarge Picture]

Coil, High Performance (Black), 12 Volt, Oil Filled
- Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511)
$35.99 [Enlarge Picture]

Coil, High Performance (Black), 6 Volt, Epoxy Filled
- Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111)
$39.21 [Enlarge Picture]

Coil, High Performance (Black), 6 Volt, Oil Filled
- Pertronix 'Flame Thrower' high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011)
$32.82 [Enlarge Picture]

Coil, High Performance (Chrome), 12 Volt, Oil Filled
- 12-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501)
$35.99 [Enlarge Picture]

Coil, Ultra High Performance (Black), Oil Filled
- Pertronix 'Flame Thrower II' Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$35.25 [Enlarge Picture]

Coil, Ultra High Performance (Chrome), Oil Filled
- Pertronix 'Flame Thrower II' Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001)
$39.68 [Enlarge Picture]

Combo Switch Lever
- Used with switches AM1866T, 10A971, 1K7654A, AR20430, AA5397R, 168089A, 30-3365891. For models G1355, U, UB, UTS, R, RT, RTI, RTU, Z, ZA, ZAE, ZAI, ZAS, ZAU, ZB, ZT, ZU, G750, G850, G955. (Part No: A4653R)
$8.50 [Enlarge Picture]

Condenser
- For model G750. (Part No: 159770A)
$10.36 [Enlarge Picture]

Distributor Cap
- 4 Cylinder Clip Type Cap For Delco Distributors:For models BF, RTU, Z, (GB, GTB, Jet Star, Jet Star 3 all with dist. 1112606), 4 Star, 5 Star, UB, UTU, M5, M602, M604. (Part No: 1750411M91)
$12.32 [Enlarge Picture]

Distributor Cap
- For models G1000, G1050, G1350, G1355, G900, G950. (Part No: 21A445)
$10.07 [Enlarge Picture]

Distributor Cap
- Replaces Delco 824735. For models (G706, G707, G708, G750, GVI all SN# up to 124395). (Part No: 21A443)
$13.00 [Enlarge Picture]

Distributor Cap
- For models M670, U302. (Part No: 10P3022)
$9.18 [Enlarge Picture]

Distributor Cap
- Fits Models: G900, G1000 with Delco-Remy Distributor. (Part No: R1953)
$10.50 [Enlarge Picture]

Distributor Cap
- Fits models: Jetstar 3 (Dist # 1112642 or 112674), M670, U302 with Delco Remy Distributor. (Part No: R1954)
$10.50 [Enlarge Picture]

Distributor Cap
- Fits models: GVI, G705, G706, G707, G708 with DELCO-REMY DISTRIBUTOR. (Part No: R1957)
$13.00 [Enlarge Picture]

Distributor Dust Cover
- Fits early Delco distributor with clip held cap. For models V, VTS, VB, VTV, G, GB, GTB, R, RTV, GVI, G705, G706, G707, G708. (Part No: 1900119)
$9.90 [Enlarge Picture]

Electronic Ignition Conversion Kit, 12 Volt Negative Ground
- For models M670, U-302 both with Delco distributor 1112660 or 1112661. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system. (Part No: 1146A)
$72.89 [Enlarge Picture]

Electronic Ignition Conversion Kit, 12 volt negative ground
- For Tractor Models Jet Star 3, 4 Star, 4 Star Super, 5 Star using Delco Distributor #1112642, U-302 (With 206B-4, 220A4, 220-4 engines), M670 with Delco 1112642 distributor. G900, 1000 using Delco 1112684 distributor. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system. (Part No: 1145A)
$72.89 [Enlarge Picture]

Electronic Ignition Conversion Kit, 12 volt negative ground
- For M5 using Autolite IBT-40001G Distributor. Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system. (Part No: 1542)
$72.88 [Enlarge Picture]

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground
- The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p n S.66442. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For model M5 using Autolite IBT-40001G Distributor. MUST ALSO REPLACE CAP (Part # AL165) and ROTOR (Part # AL150) both available from an auto parts store. (Part No: 91542)
$103.57 [Enlarge Picture]

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground
- The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p n S.66442. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For models Jet Star 3, 4 Star, 4 Star Super, 5 Star using Delco Distributor #1112642, U-302 (with 206B-4, 220A4, 220-4 engines), M670 with Delco 1112642 distributor, G900, 1000 using Delco 1112684 distributor. (Part No: 91145A)
$103.57 [Enlarge Picture]

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground
- The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p n S.66442. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For models M670, U-302 both with Delco 1112660 distributor. (Part No: 91146A)
$103.57 [Enlarge Picture]

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground
- The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p n S.66442. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For models 2890, 3490, 3496, 4290, 4292, 4293, 4296, 5297 all using Autolite IAD-4040-1 distributor. (Part No: 91561)
$103.57 [Enlarge Picture]

Generator Belt
- For models R, Z, ZA, ZB, U. (Part No: 49341D)
$12.86 [Enlarge Picture]

Generator, DR/GEN
- 6 volt, 35 amps. For model 335. Replaces 10A7938. Refundable $25.00 core charge will be added to orders. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TG-72)
$266.48 [Enlarge Picture]

Ignition Tune-up Kit
- For Delco Clip-Held Cap Distributor. Includes points, rotor and condenser. For models BF, RTU, Z, GB, GTB, Jet Star, Jet Star 3, 4 Star, 5 Star, UB, UTU, GVI, G705, G706, G707, G708, M5, M602, M604. (Part No: ATK1DCR)
$11.98 [Enlarge Picture]

Ignition/Light Switch
- 5 terminal, uses A4653R lever. For models R, (U, UB some gas), RT, RTI, UTS, RTU, Z, ZA, ZAE, ZAI, ZAS, ZAU, ZB, ZT, ZTU. Replaces 10A2071, 10A3749. (Part No: 10A971)
$33.31 [Enlarge Picture]

Ignition/Light Switch - 4 position, uses A4653R lever. For models G1355, G750, G850, G955. (Part No: 168089A)$34.35

Key Switch
- 5 terminal, with keys & jam nut. For models G1355, G955. (Part No: R5349)
$43.13 [Enlarge Picture]

Key Switch, 3 Position - 3 terminal. For models G1000, Super Jetstar 3, Super M670, G900, U302, Super U302. (Part No: 10A22293)$26.78

Key Switch, 5 Position - 3 terminal. For models 2 Star, U, 445, Jetstar 3, 5 Star, GVI, 4 Star, Super 4 Star, Big Mo 400, M5, M504, Big Mo 500, Big Mo 600, G705, G706, M602, M604, (M670 Gas LP up to SN# 29901891 & Diesel up to SN# 30000819. Replaces 10A23929. (Part No: 10A7473)$60.68

Magneto, Wico XH & XHD, Service & Parts Manual
- Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25 [Enlarge Picture]

STARTER DRIVE - Services starter 1107025. For models RT, G4, Z, ZA, ZAE, ZAI, ZAN, ZAS, ZAU, ZB, ZT, ZTU. Replaces 1868804. (Part No: 565549)$36.52

Spark Plug - Extended tip, 14mm thread, 3 4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)$3.64

Spark Plug - Extended tip, 14mm thread, 3 8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)$3.64

Spark Plug Wire Set - Like Original. For models GB, GT, GTA, GTB. (Part No: R6744)$34.09

Spark Plug Wire Set - Like Original with Distributor. For models R and Z series. (Part No: R6745)$43.00

Spark Plug Wire Set - Like original. For models U, UT, UTL, UTS, UTU. (Part No: R6746)$43.00

Spark Plug Wire Set - Like original. For models UB, 5 Star, M670. (Part No: R6747)$43.00

Spark Plug Wire Set - Like original. For models Jet Star, 335, 445, M5, U302. (Part No: R6748)$34.09

Spark Plug Wire Set - Like original. For models G705, G706. (Part No: R6749)$65.68

Spark Plug Wire Set, 4 Cylinder, Universal
- For use with Ignitor II high performance electronic ignition conversion kits. (Part No: S.66442)
$14.48 [Enlarge Picture]

Spark Plug Wire Set, Universal, 4 Cyl.
- Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)
$18.12 [Enlarge Picture]

Spark Plug Wire Set, Universal, 6 Cyl.
- Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$20.02 [Enlarge Picture]

Spark Plug Wires - For models BF, BG. Original Style Spark Plug Wire Set. (Part No: R6743)$34.09

Starter Drive
- For models ZA, U, U302, UB, UBED, UBD, UBG, UBN, UBU, UT, UTL, UTS, UTU. All using starter 1107905 (Part No: 1850844)
$29.19 [Enlarge Picture]

Starter Solenoid
- 12 volt. For models G1000, (G1350, G1355 diesels). (Part No: 1119879)
$49.90 [Enlarge Picture]

Starter Switch
- Manual, saddle mount. For models 445, Jetstar, 4 Star, Super 4 Star using 1108162 starter. Replaces 1932131. (Part No: 1925781)
$10.08 [Enlarge Picture]

Starter Switch
- Saddle mount, used with 1108162 starter. For models Jet Star, 5 Star, 4 Star. (Part No: 1932131)
$11.65 [Enlarge Picture]

Starter Switch
- 4-position: LEFT=accessories, CENTER=off, RIGHeight accessories and ignition, FAR RIGHeight start. 4 stud terminals. 7 16 inch long mounting stem with 3 4 inch dia. 2 brass keys. 1 1 8 inch mounting nut. This does not fit all models.(HA) (Part No: 782979)
$15.52 [Enlarge Picture]

Starter, Generator Tag, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.40 [Enlarge Picture]

Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.40 [Enlarge Picture]

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)$25.95

Voltage Reducer with Bracket
- 12 volt to 6 volt. (Part No: S.52671)
$11.82 [Enlarge Picture]

Voltage Regulator - 6 volt, replaces Delco 1118790. For models U, U302, UB, UBD, UBED, UBG, UBN, UBU, UT, UTL, UTS, UTU, Z, ZA, ZAE, ZAI, ZAN, ZAS, ZAU, ZB, ZT, ZTU, R, RT, RTI, RTU, GTA, GTB. All using generator 1100505. (Part No: 10A20736)$36.35

Voltage Regulator - 12 volt, replaces Delco 1119507. For models Jet Star 3, U302, M670, G900, G1000. Using alternator 1100720. (Part No: 10P3009)$27.88

Voltage Regulator - 12 volt, replaces Delco 1110000, 35A5137. For models G704, G705, G706, G707, G708, G900, Jetstar 3, U302. Using 1100430 or 1100432 generators. (Part No: 121579C1)$65.16

Voltage Regulator - 12V
- For models BIG MO 400, BIG MO 500, BIG MO 600, GTB, JET STAR 3, JET STAR 4, Super JET STAR 4, JET STAR 5, M5, M504, M602, M604, SB, UB, UTI, ZAS, ZB. 12V Voltage Regulator replaces Delco #1118791, MA588, 1009723M91. For Delco Generators: 1100335, 1100314, 1100350, 1100322, 1100349, 1100954, 1100328, 1100379, 1100315, 1100953. (Part No: K7786D)
$42.29 [Enlarge Picture]

Voltage Regulator, 6 Volt
- 6 volt. For models GTB, Jet Star, R, U, Z. (Part No: 1118790)
$42.73 [Enlarge Picture]

Wiring Harnes - Like Original. For models BF, BG. (Part No: R6760)$226.80

Wiring Harnes - Like Original. For models R, RT, RTI, RTU, RTV all with cut-out. (Part No: R6761)$234.90

Wiring Harnes - Like Original. For models R, RT, RTI, RTU, RTV all with voltage Regulator. (Part No: R6762)$243.00

Wiring Harnes - Like Original. For models U, UB, UT, UTL, UTS, UTU all with Cut-out. (Part No: R6763)$251.10

Wiring Harnes - Like Original. For models U, UB, UT, UTL, UTS, UTU all with Voltage Regulator. (Part No: R6764)$267.30

Wiring Harnes - Like Original. For models Z, ZA, ZAE, ZAI, ZAN, ZAS, ZAU all with Cut-out. (Part No: R6765)$251.10

Wiring Harnes - Like Original. For models Z, ZA, ZAE, ZAI, ZAN, ZAS, ZAU all with Voltage Regulator. (Part No: R6766)$267.30

Wiring Harnes - Like Original. For models 335, 445. (Part No: R6767)$283.50

Wiring Harnes - Like Original. For models M602, M604. (Part No: R6768)$299.70

Wiring Harnes - Like Original. For models M670 Diesel. (Part No: R6769)$526.50

Wiring Harnes - Like Original. For models G705, G706. (Part No: R6770)$542.70

Wiring Harnes - Like Original. For models G707, G708. (Part No: R6771)$542.70

 
Engine Bearings
Main Bearing Set - Available in .010 (only) For Jetstar, Jetstar 3, 3 Star, 4 Star, Super 4 Star, 445 with 206 Gas Engine. (Part No: MS-900P-010)$81.55

Main Bearing Set - Available in STD, .010, .020 For G705, G706, G707, G708, G1000 with 504 Gas Engine. Specify size in Comments box when ordering. (Part No: MS-532P)$258.98

Main Bearing Set - Available in STD, .010, .020 For G705, G706, G1000, G1050 with 504 Diesel Engine. Specify size in Comments box when ordering. (Part No: MS-532P)$258.98

Main Bearing Set - .010 - For 5 Star, M5, M504, M602, M604, M670, Super M670 with 336 Gas Engine. (Part No: MS-531P-010)$198.02

Main Bearing Set - .020 - For M5, M504, M602, M604, M670, Super M670 with 336 Gas Engine. (Part No: MS-531P-020)$198.02

Main Bearing Set - .STD - For M5, M504, M602, M604, M670, Super M670 with 336 Gas Engine. (Part No: MS-531P-STD)$198.02

Rod Bearing - Sold individually 4 required. For models Jetstar 3, Jetstar, 3 Star, 4 Star, Super 4 Star, 445 all with 206 engine. Available in std., .010, .020, .030. (Part No: CB-594P)$19.12

Rod Bearing (4 Required) - Available in STD, .010, .020, .030 For M5, M504, M602, M604, M670, Super M670 with 336 Gas Engine. Specify size in Comments box when ordering. (Part No: CB-591P)$43.80

Rod Bearing (4 Required) - Available in STD, .010, .020, .030 For 5 Star, M5, M504, M602, M604, M670, Super M670 with 336 Diesel Engine. Specify size in Comments box when ordering. (Part No: CB-591P)$43.80

Rod Bearing (6 Required) - Available in STD, .010, .020, .030 For G705, G706, G707, G708, G1000 with 504 Gas Engine. Specify size in Comments box when ordering. (Part No: CB-591P)$43.80

Rod Bearing (6 Required) - Available in STD, .010, .020, .030 For G705, G706, G1000, G1050 with 504 Diesel Engine. Specify size in Comments box when ordering. (Part No: CB-591P)$43.80

 
Engine Gaskets
Full Gasket Set - Full Gasket Set Less Seals For R, Z with 206 Gas Engine (Part No: FS18329)$112.02

Head Gasket Set - For Models: Jetstar, Jetstar 3, 3 Star, 4 Star, Super 4 Star, 445 with 206 Gas Engine. (Part No: HS3114)$194.40

Head Gasket Set - For models R, Z with 206 Gas Engine. (Part No: HS18329)$142.39

Head Gasket Set - For models 5 Star, M5, M504, M602, M604, M670, Super M670 with 336 Diesel Engine. (Part No: HS8323B-1)$140.67

Overhaul Gasket Set - Less Head Gasket - For GB with 403 Gas Engine. (Part No: CS7550-1)$191.43

Overhaul Gasket Set - Less Head Gasket - For GB with 403 Gas Engine. (Part No: CS7550-1)$191.43

Silicone Black RTV
- Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$7.14 [Enlarge Picture]

Silicone Blue RTV
- Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 F to +500 F, 3.35 oz. tube. (Part No: PRM77BR)
$7.86 [Enlarge Picture]

Silicone Copper RTV
- Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75 F to +700 F, 3 oz. tube. (Part No: PRM101BR)
$11.78 [Enlarge Picture]

 
Engine Overhaul Kits
Lucas Assembly Lube
- Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. Its useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)
$6.71 [Enlarge Picture]

Rebore Kit, .030 - .030 Oversize. For models G705, G706, G707, G708, G1000 with 504 Gas Engine. (Part No: R3459)$1269.44

Rebore Kit, Std. - 4 5 8 Standard Bore. For models G705, G706, G707, G708, G1000 with 504 Gas Engine (Part No: R3458)$1269.44

 
Engine Parts
Crankshaft
- Splined nose, lip seal. For model 7600 combine. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: 3637424M91)
$688.62 [Enlarge Picture]

Crankshaft Retainer, Rear
- For model G750. Replaces 162508AS, 155717AS, 303142574. (Part No: 168150AS)
$94.61 [Enlarge Picture]

Exhaust Valve - For models Jetstar, Jetstar 3, 3 Star, 4 Star, Super 4 Star, 445 all with 206 gas engine. (Part No: 211-1871)$22.50

Flywheel Hub
- For model U302. (Part No: 10A20744)
$186.77 [Enlarge Picture]

Flywheel Hub - For models Jetstar 3, Jetstar 4, Big Mo 400 Industrial Wheeler, 335 Power lined. Flywheel Hub comes with bushing. (Part No: 10A7188)$186.77

Intake Valve - For models Jetstar, Jetstar 3, 3 Star, 4 Star, Super 4 Star, 445 all with 206 gas engine. (Part No: 211-1279)$27.00

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). (Part No: Valve-Kit)$0.00

Valve guides - For models Jetstar, Jetstar 3, 3 Star, 4 Star, Super 4 Star, 445 all with 206 gas engine. Must be ordered in quantities of 8 priced individually. (Part No: 217-3891)$8.00

 
Engine Pistons and Sleeves
Cylinder Hone
- For bores from 1 1 2 to 3 inches. Easily adjusts. Length of 7 3 4 inches. Comes with stones. Call for replacement stones. (Part No: B1SB1704)
$28.83 [Enlarge Picture]

Piston Groove Cleaner
- For pistons up to 5 1 2 inches. Cleans grooves of 5 64, 3 32, 1 8, 5 32 and 3 16. (Part No: B1SB9055)
$24.95 [Enlarge Picture]

Piston Ring Compressor
- Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1 2 inches. Range 3 1 2 to 7 inches. (Part No: 900521)
$35.67 [Enlarge Picture]

Ridge Reamer
- Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560)
$63.87 [Enlarge Picture]

 
Engine Rings
Piston Ring Set - For 194 CID 6 cylinder gas or diesel engines overbored to 3-9 16". Complete for 1 engine. (Part No: PRS307)$145.84

Piston Ring Set - 3-5 8" bore, 12 compression rings 3 32", 4 oil rings 3 16". For models Jet Star 3, Big Mo 400, Big Mo 500, diesel, gas or LP. (Part No: 2C7581)$95.66

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3 32"), 4. Number and size of oil rings for each piston (Ex: (1) 5 32"). (Part No: RING-SETS)$0.00

 
Exhaust System
Chrome Exhaust Stacks
- Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 (Part No: CHROMEEXHAUST)
$0.00 [Enlarge Picture]

Elbow
- For models 4 Star, Big Mo 500, JetStar, JetStar 2, JetStar 3, U302, 335, 445 (with 206 & 220 CID engines). (Part No: 10A9363)
$34.95 [Enlarge Picture]

Extension Pipe
- With Clamp Inlet I.D. - 4 Outlet O.D. - 4 Overall Length - 24 For G705, G706, G1000 Use with R1727 Muffler. OEM# Use R1759 Clamp, Use R1807 Rain Cap (Part No: R1676)
$37.79 [Enlarge Picture]

Heat Riser Valve
- Use with R0743 Manifold For U, UB (Part No: R0744)
$73.71 [Enlarge Picture]

Intake Manifold
- For models U, UB. Gaskets NOT included but are available as p n R0337G. (Part No: KE822A)
$163.50 [Enlarge Picture]

Manifold - Comes with elbow. For models 335, 4 Star, Jetstar 3, 445, U302. Replaces 10B8158, 10A20952, 10A9363, 10A7695. (Part No: 10A7931)$228.26

Manifold - For MM model V or Avery model V woth with Hercules ZXB3 65 engine. is 8 5 8 c.c. outside holes and 12 1 4 O A. Made from ductile iron. (Part No: AVS001)$199.50

Manifold
- Includes elbow and plates. For models 4 Star, Big Mo 500, JetStar, JetStar 2, JetStar 3, 335, 445 (with 206 & 220 CID engines. (Part No: 10A7695)
$124.95 [Enlarge Picture]

Manifold
- For models U, UB, UTS all with gas engines, will fit G gas if also ordering KE822A intake manifold. Gasket set NOT included but is available as p n R0337G. (Part No: KE821G)
$248.00 [Enlarge Picture]

Manifold - Intake & Exhaust with elbow. For models 5 Star, M5, M602, Super M670, (U late), UB. (Part No: 10A9465)$216.22

Manifold Gasket Set
- Manifold Gasket Set. For models 5 Star, M5, M602, M670, Super M670, U, UB. (Part No: R0337G)
$24.50 [Enlarge Picture]

Manifold Gasket Set
- For model BG with Hercules engine. (Part No: R0949G)
$14.50 [Enlarge Picture]

Muffler
- For models GB, GTB, UB, UT, 5 Star, GVI. Replaces 10A12633. (Part No: KE846)
$51.94 [Enlarge Picture]

Muffler
- For models G705, G706, G707, G708, G1000, G1000 Vista, G900, G950, G1050. (Part No: 10A29916)
$49.19 [Enlarge Picture]

Muffler
- Horizontal or vertical exhaust, inlet I.D 2-1 4", outlet O.D 1-3 4", overall length 17". For model 335 gas. (Part No: 10A8693)
$31.50 [Enlarge Picture]

Muffler
- Horizontal Exhaust Inlet I.D. - 2 1 2 Outlet O.D. - 2 1 2 Overall Length - 20 For R, ZA, ZAE, ZAS, ZAU. OEM# 10A759B, Use R1753 Clamp (Part No: R1721)
$43.28 [Enlarge Picture]

Muffler
- Vertical Exhaust Inlet I.D. - 2 5 8" Outlet O.D. - 2 3 4" Overall Length - 32" For M5, M602, M604, M670. Replaces OEM# 10A16033, 10A23891, 10A15416. Use R1754 Clamp, Use R1804 Rain Cap. (Part No: R1727)
$42.09 [Enlarge Picture]

Muffler, Vertical
- Round body, A= 4-1 2" inlet length, B= 2-3 4" inlet I.D., C= 15" shell length, D= 6" outlet length, E= 2-3 4" outlet O.D., F= 26" overall length. For models G, GVI, U, (Z early model). (Part No: 10A12633)
$38.27 [Enlarge Picture]

Muffler, Vertical
- Round body 6" diameter, A= 1-1 2" inlet length, B= 3-15 16" inlet I.D., C= 19" shell length, D= 3-1 2" outlet length, E= 4" outlet O.D., F= 24" overall length. For models G705, G706. (Part No: 10A17881)
$57.32 [Enlarge Picture]

Muffler, Vertical
- Oval body 5-1 2" X 9-1 2" shell dimension, A= 5-1 4" inlet length, B= 3-15 16" inlet I.D., C= 23" shell length, D= 3-1 2" outlet length, E= 2-3 4" outlet O.D., F= 32" overall length. For models G1000, G1350 both late model. (Part No: 10A31300)
$156.50 [Enlarge Picture]

Muffler, Vertical
- Round body 3-1 4" shell diameter, A= 10-1 2" inlet length, B= 1-7 8" inlet I.D., C= 12-1 2" shell length, D= 2-3 4" outlet length, E= 2" outlet O.D., F= 26" overall length. For model Jet Star early. (Part No: 10A14337)
$40.09 [Enlarge Picture]

Muffler, Vertical
- Round body 4-1 4" shell diameter, A= 9" inlet length, B= 1-7 8" inlet I.D., C= 15" shell length, D= 2-1 4" outlet length, E= 2" outlet O.D., F= 26" overall length. For models Super 4 Star, Jet Star 3 with gas or diesel engine. (Part No: 10A14444)
$42.06 [Enlarge Picture]

Muffler, Vertical
- Exhaust Inlet I.D. - 3 15 16 Outlet O.D. - 4 Overall Length - 24 For G705, G706, G1000. Replaces OEM# 10A17881. Use R1759 Clamp, Use R1807 Rain Cap (Part No: R1728)
$56.62 [Enlarge Picture]

 
Fuel System / Air Intake
Air Cleaner Filler
- Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1 2" x 3-1 4". (Part No: S.43231)
$9.90 [Enlarge Picture]

Carburetor Float
- Fits Marvel TSX374, TSX610, TSX633, TSX713, TSX755, TSX775, TSX811 large bowl carbs. For model 445. (Part No: KS7605)
$29.36 [Enlarge Picture]

Carburetor Float
- Replaces EE9512, TO7074, 10P920, 135493, small bowl carbs. For models BF, GTB, R, RC60, RTI, 20, 30, 60, 70, 335. (Part No: HS7605)
$11.52 [Enlarge Picture]

Carburetor Float
- Use with Marvel Schebler Carbs: TSX67, TSX68, TSX624, TSX625, TSX693, TSX740, TSX795, TSX901 For MODELS: GB, GTB, GVI, U, UB, UT, UTS, 5 Star, M5, M504, M602, M604, M670 (Part No: R4012)
$30.00 [Enlarge Picture]

Carburetor Kit, Basic
- Kit for Marvel TSX650, TSX714, TSX885, TSX231, TSX497, TSX30, TSX36 carbs used on 335, R, RT, RTI. (Part No: MS101)
$22.94 [Enlarge Picture]

Carburetor Kit, Basic
- Kit for Marvel TSX713, TSX797, TSX633, TSX878, TSX97 carbs used on 4 Star, 445, Big Mo 400, Big Mo 500, Big Mo 600, Jet Star, Jet Star 3, M4, Super 4 Star, U302, Z, ZA, ZB. (Part No: MS102)
$23.26 [Enlarge Picture]

Carburetor Kit, Basic
- Kit for Marvel TSX693, TSX740, TSX625, TSX68, TSX795, TSX901, TSX67, TSX624 carbs used on 5 Star, GVI, GB, GTB, M5, M504, M602, M604, M670, U, UB, UT, UTS. (Part No: MS103)
$22.00 [Enlarge Picture]

Carburetor Kit, Basic
- Kit for Zenith 7310, 7116 carbs used on 70. (Part No: Z109)
$28.00 [Enlarge Picture]

Carburetor Kit, Basic
- Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For models BF, BFH, BG, RT. (Part No: K2119)
$25.86 [Enlarge Picture]

Carburetor, New
- With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 1953 & up R, RT tractor using Marvel Schrebler TSX338, TSX497, TSXU830, TSXU833 carburetors. Also replaces TSX862 on M40 Lift truck. Center to center on the 2 mounting bolts is 2 5 16 inches. Made in USA, 1 year warranty. (Part No: 14544)
$278.00 [Enlarge Picture]

Carburetor, New
- New Carburetor with reversible linkage. For G to 1955, G6, GB 1955 up, GTA & GTB to 1955, M-670, 550 (5-Star), Replaces TSX394, TSX68, TSX625, TSX693, TSX740, TSX777, TSX901, TSXU839, TSXU995. Center to center on the 2 mounting bolts is 2 11 16 inches. (Part No: 14997)
$305.00 [Enlarge Picture]

Carburetor, New
- With reversible linkage. This Zenith carburetor outperforms the original carbs used on: G-4, KT, MT, Z, ZA, ZT, 445, Jetstar, 4 Star, Unitract, Motract, New Tractor, Unitractor, Replaces TSX97, TSX360, TSX633, TSX713, TSX797, TSXU835, TSXU836. Center to center on the 2 mounting bolts is 2 3 8 inches. Made in USA, 1 year warranty. (Part No: 14991)
$289.33 [Enlarge Picture]

Carburetor, New
- With reversible linkage. This Zenith carburetor outperforms the original carbs used on: BF, BFH, BG, 1949-52 R-RT, 11939-48 RT, Replaces TSC-30, 36, 231, 400, 421, TSXU828, TSXU829, TSXU831, TSXU832. Center to center on the 2 mounting studs is 2 5 16 inches. Made in USA, 1 year warranty. (Part No: 12522)
$269.50 [Enlarge Picture]

Carburetor, Rebuilt - Fits GTA, GTB - replacement for OEM TSX68. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1802-CARB)$147.39

Carburetor, Rebuilt - Fits M4 - replacement for OEM TSX878. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1804-CARB)$147.39

Carburetor, Rebuilt
- Fits U - replacement for OEM TSX67. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1806-CARB)
$147.39 [Enlarge Picture]

Carburetor, Rebuilt - Fits UB - replacement for OEM TSX624. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1807-CARB)$147.39

Carburetor, Rebuilt - Fits R - replacement for OEM TSX36, TSX231, TSX497. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1808-CARB)$147.39

Carburetor, Rebuilt - Fits ZA, ZB, Z, G4 - replacement for OEM TSX97. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1810-CARB)$147.39

Carburetor, Rebuilt - Fits U-302 - replacement for OEM TSX878. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1811-CARB)$147.39

Carburetor, Rebuilt - Fits 335 - replacement for OEM TSX650, TSX714. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1812-CARB)$147.39

Carburetor, Rebuilt - Fits 335, M5 - replacement for OEM TSX795. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1814-CARB)$147.39

Carburetor, Rebuilt - Fits 445 - replacement for OEM TSX633. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1816-CARB)$147.39

Carburetor, Rebuilt - Fits 5 STAR, GVI, 670 - replacement for OEM TSX693, TSX901. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1818-CARB)$147.39

Carburetor, Rebuilt - Fits JET STAR, 4 STAR - replacement for OEM TSX713. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1820-CARB)$147.39

Choke Cable
- Universal choke cable 72 inches long, 7 16 inch thread dia. (Part No: CC72)
$15.22 [Enlarge Picture]

Fuel Filter, In-Line, 1/4 inch
- Inlet 1 4, outlet 1 4, O.D. 1-29 32, length 4-1 16. (Part No: 6511393)
$6.92 [Enlarge Picture]

Fuel Filter, In-Line, 3/8 inch
- Inlet 3 8, outlet 3 8, O.D. 1-29 32, length 3-7 8. (Part No: BF836)
$6.28 [Enlarge Picture]

Fuel Filter, In-Line, 5/16 inch
- Inlet 5 16, outlet 5 16, O.D. 1-29 32, length 4-5 32. (Part No: BF840)
$6.22 [Enlarge Picture]

Fuel Filter, In-Line, 5/16 inch, Clear
- Inlet 5 16, outlet 5 16, O.D. 2-1 8, length 3-21 32. (Part No: BF7736)
$5.94 [Enlarge Picture]

Fuel Injector
- For models G1350, G1355. Refundable $15 core charge will be added to your order. (Part No: 200000085-R)
$49.83 [Enlarge Picture]

Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$29.99 [Enlarge Picture]

Fuel Tank Liner Kit
- Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$65.00 [Enlarge Picture]

Fuel Tank Repair Kit
- Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3 8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180)
$27.62 [Enlarge Picture]

Fuel Tank Webbing, 3 Ft
- Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494)
$8.38 [Enlarge Picture]

Injection Line, Nbr 1 Cylinder
- For model G750 SN# 147569 to 187585. (Part No: 163471AS)
$23.51 [Enlarge Picture]

Injection Line, Nbr 1 Cylinder
- For model G750 SN# 187856 and up. Replaces 164480AS. (Part No: 165859A)
$23.90 [Enlarge Picture]

Injection Line, Nbr 2 Cylinder
- For model G750 SN# 147569 to 187585. (Part No: 163472AS)
$23.65 [Enlarge Picture]

Injection Line, Nbr 2 Cylinder - For model G750 SN# 187586 and up. Replaces 164481AS. (Part No: 165860A)$26.15

Injection Line, Nbr 3 Cylinder
- For model G750 SN# 147569 to 187585. (Part No: 163473AS)
$23.65 [Enlarge Picture]

Injection Line, Nbr 3 Cylinder
- For model G750 SN# 187586 and up. Replaces 164482AS. (Part No: 165861A)
$24.10 [Enlarge Picture]

Injection Line, Nbr 4 Cylinder
- For model G750 SN# 147569 to 187585. (Part No: 163474AS)
$23.65 [Enlarge Picture]

Injection Line, Nbr 4 Cylinder
- For model G750 SN# 187586 and up. (Part No: 165862A)
$17.86 [Enlarge Picture]

Injection Line, Nbr 5 Cylinder
- For model G750 SN# 147569 to 187585. (Part No: 163475AS)
$25.67 [Enlarge Picture]

Injection Line, Nbr 5 Cylinder
- For model G750 SN# 187586 and up. Replaces 164484AS. (Part No: 165863A)
$28.70 [Enlarge Picture]

Injection Line, Nbr 6 Cylinder
- For model G750 SN# 147569 to 187585. (Part No: 163476AS)
$23.41 [Enlarge Picture]

Injection Line, Nbr 6 Cylinder
- For model G750 SN# 187586 and up. (Part No: 165864A)
$17.86 [Enlarge Picture]

Lucas Fuel Treatment (quart)
- Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$9.97 [Enlarge Picture]

Pre-Cleaner Bowl
- Small bowl for 2" to 3" inlet. Clear plastic. A=7-1 4" bowl O.D at top, B=3-1 2" cone I.D at top, C=3" bowl side height, D=4" overall height. For models M5, M605. Can replace Donaldson bowl #P02-0227. (Part No: 101965A)
$11.98 [Enlarge Picture]

Pre-Cleaner Bowl
- Large bowl. Clear plastic. A=10-1 2" O.D at top, B=5-9 16" cone I.D at top, C=3" side height, D=4" overall height. For models G1000, 1050. Can replace Donaldson bowl #p01-6330. (Part No: 10P2754)
$17.16 [Enlarge Picture]

 
Gaskets
Gasket Material, Cork Rubber
- 3 32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR332)
$10.95 [Enlarge Picture]

Gasket Material, Cork Rubber
- 1 16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116)
$13.75 [Enlarge Picture]

Gasket Material, Exhaust Manifold
- 1 16" thick x 12" wide x 28-1 2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$19.95 [Enlarge Picture]

Gasket Paper, .0160
- .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$14.90 [Enlarge Picture]

Gasket Paper, .0275
- .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$22.90 [Enlarge Picture]

 
Gauges
Ammeter Gauge
- For model G750. Replaces 158583A (Part No: S.53141)
$23.03 [Enlarge Picture]

Amp Gauge, Black Bezel
- For models G, G700, G705, G706, G707, G708, GVI, M5, M602, M604, M670, M670 Super, R, U, ZA, ZB, ZT, 335, 445, JET STAR (1938-1965). Replaces BE455A, 10A8171. This gauge has 30-0-30 range, Original Style with MM log. Fits 2 inch hole. (Part No: 30-3485560)
$35.00 [Enlarge Picture]

Amp Gauge, Chrome Bezel - For models G, G700, G705, G706, G707, G708, GVI, M5, M602, M604, M670, M670 Super, R, U, ZA, ZB, ZT, 335, 445, JET STAR (1938-1965). Replaces BE455A, 10A8171. This gauge has 30-0-30 range, Original Style with MM log. Fits 2 inch hole. (Part No: 10A8171)$29.90

Fuel Gauge
- 12 volt negative ground. For model G750. Replaces 155558A. (Part No: S.53143)
$24.68 [Enlarge Picture]

Hour Meter
- DC voltages from 12V thru 36V nominal. Heavy duty glass-reinforced polyester body. Internal shock shields & grommets protect movement from shock & vibration damage. Fits 2-1 4" opening, three(3) mounting screws with nuts and two(2) blade terminals included. (Part No: HM771)
$43.69 [Enlarge Picture]

Hourmeter, Analog
- 2", black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40 [Enlarge Picture]

Oil Gauge Copper Line Kit
- Universal, for tractors using 1 8 x 6 ft. copper oil line. Includes 6 Ft 1 8 Line, 2 x 5 16 -24 UNF Nuts, 2x Compression sleeves, and a 1 8-27 NPTF Female to 5 16-24 UNF male adapter. (Part No: UNI523)
$22.75 [Enlarge Picture]

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1 8" pipe thread to 1 8" tube. Brass. (Part No: 919095)$14.35

Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1 8" pipe thread to 1 4" tube. Brass. (Part No: IHS626)
$14.35 [Enlarge Picture]

Oil Pressure Gauge
- Universal Complete assembly with oil tube and mounting hardware, Lighted. 80 psi. Line uses 1 4 inch connection with adapters for 3 8 and 1 2 inch. (Part No: SSW0002)
$15.95 [Enlarge Picture]

Oil Pressure Gauge - Black Bezel
- For models G, GB, 700, R, U, ZA, ZB, ZT, 335, 445, Jetstar (1938-1965). Replaces JT854, 10A7986. This gauge is original style with MM logo. Fits 2" hole. (Part No: 30-3485471)
$38.30 [Enlarge Picture]

Temperature Gauge
- With 60 inch Capillary tube, 2 inch Face Diameter, Illuminated, Chrome Ring with Bulb Fits. 180 degree normal temperature setting, 220 degree pegs top end. 5 8" UNF connector. For models Big Mo 400, G705, G706, G707, G708, GTB, GTC, GVI, Jet Star 3, Jet Star 3 Super, Jet Star, M5, M504, M602, M604, M670, R, RTI, U, UTS, ZA, ZAS, ZB. Longer Capillary Tube (72 inch) available upon request for an additional charge. (Part No: 180727M91)
$18.26 [Enlarge Picture]

Temperature Gauge
- 12 volt negative ground. For model G750. Replaces 155557A, 30-3031659. (Part No: S.53142)
$24.68 [Enlarge Picture]

Temperature Gauge
- Universal water Temperature gauge(0-280 degree scale). Fits model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1 2 inch or 3 4 male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.85 [Enlarge Picture]

Temperature Gauge, Universal
- For 2" mounting hole. Complete assembly with bracket and adapters for block. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77" capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$25.30 [Enlarge Picture]

Water Temperature Gauge - Black Bezel
- For models G, GB, G700, R, U, ZA, ZB, ZT, 335, 445, STAR, JET STAR (1938-1965). Replaces 10A2229, 10A2794. This gauge is Original Style with MM logo. Fits 2 inch hole with 40 inch capillary line. (Part No: 30-3485587)
$40.66 [Enlarge Picture]

Water Temperature Sending Unit
- For models G1355, G750. (Part No: 303485544)
$11.11 [Enlarge Picture]

 
Hitch / Drawbar
Center tube, Stablizer
- Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)
$17.62 [Enlarge Picture]

Check Chain & Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A)$7.96

Drawbar - 42.375" long, 2.50" wide, 1.50" high. For models G1355, G955. (Part No: 163581A)$320.67

Drawbar Roller End Plate
- For models G1355, G955. (Part No: 104629A)
$19.28 [Enlarge Picture]

Drawbar Roller Pin
- For models G1355, G955. (Part No: 104628A)
$36.79 [Enlarge Picture]

HAIR PIN ASSORTMENT
- 15-piece assortment. Includes four(4) of HP-3 (wire dia 3 16, length 3.75), four(4) of HP-4 (wire dia 5 32, length 2 15 16), four(4) of HP-5 (wire dia 1 8, length 2 9 16), and three(3) of HP-6 (wire dia 3 32, length 1 5 8). (Part No: HPA15X)
$46.86 [Enlarge Picture]

HITCH BALL 10000LB 2-5/16
- 2-5 16 BALL SIZE, 1-1 4STUD THREAD, 2-1 2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85 [Enlarge Picture]

HITCH BALL 15000LB 2-5/16
- 2-5 16 BALL SIZE, 1-3 8STUD THREAD, 2-5 8 STUD LENGTH, 15000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)
$23.40 [Enlarge Picture]

HITCH BALL 2000LB
- 1-7 8 BALL SIZE, 3 4 STUD THREAD, 1-3 4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)
$12.30 [Enlarge Picture]

HITCH BALL 3500LB
- Hitch ball. 2" ball size, 3 4" stud thread, 1-7 8" stud length, 3500 lb. max load capacity, one two chrome hitch ball class. (Part No: CHB234)
$12.64 [Enlarge Picture]

HITCH BALL 5000LB
- Hitch ball. 2" ball size, 1" stud thread, 2-1 8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$14.44 [Enlarge Picture]

HITCH BALL 5000LB 2-5/16
- Hitch Ball, 2-5 16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$20.52 [Enlarge Picture]

LINCH PIN
- Package of 10 linch pins. Pin diameter 1 4 inch, useable length 1 1 4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$4.90 [Enlarge Picture]

LINCH PIN
- Package of 10 linch pins. Pin diameter 5 16 inch, useable length 1 1 4 inch, Ring diameter 1 5 8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516)
$4.00 [Enlarge Picture]

LINCH PIN
- Package of 10 linch pins. 7 16" dia. pin x 1-3 4" useable length, 1-5 8" dia. ring. Enter 1 for package of 10. (Part No: DKLP91)
$3.90 [Enlarge Picture]

LINCH PIN
- LINCH PIN Package of 10 linch pins. 3 16" O.D. pin x 1-1 4" Long.***Enter 1 for package of 10** (Part No: DKP316)
$3.90 [Enlarge Picture]

Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7 8" mounting pins and adapter bushings, 27-1 4" width, 3-1 2"x 3-1 2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$284.34 [Enlarge Picture]

Universal Drawbar Lock
- For CAT I drawbars only (drawbars that are 1" thick x 2-1 2" width) . Prevents drawbar from rotating. (Part No: 49A29)
$26.72 [Enlarge Picture]

Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1 2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$27.98 [Enlarge Picture]

Universal Stabilizer Chain Kit
- Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch - usually used on larger tractors - VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. (Part No: SK102CH)
$47.67 [Enlarge Picture]

 
Hydraulic System
Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Parts)$00.00

Hydraulic Pump
- For models A4T1400, A4T1600, G1050, G1350, G900, G950, (M670 gas & LP SN# 29901892 and up, diesel SN# 30000820 and up). Replaces 10A23836, 10A23978. (Part No: 207130065)
$977.40 [Enlarge Picture]

Hydraulic Pump
- For models (Jet Star 3, Jet Star 4 all with power steering. Replaces 10A23673, 10A23681, 10A23682, 10A16977. (Part No: 207001354)
$905.36 [Enlarge Picture]

Hydraulic Pump
- Closed center. For models G1355, G955. Refundable $330 core charge will be added to your order. (Part No: 303141764-R)
$1280.71 [Enlarge Picture]

 
Implements
AXLE BOLT
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$18.22 [Enlarge Picture]

AXLE NUTS (5)
- 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.58 [Enlarge Picture]

BLADE BOLT KIT
- For rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1 8-12 inch, B = 3 1 2 inch, C = 1 3 8 inch, D = 1 inch, E = 9 16 inch, F = 1 2 inch, G = 2 1 2 inch, H = 1.492 (for 1 1 2 Blade Hole), I = 1.12 inches. Contains (BH2500) hardware for 2 blades. (Part No: 63607)
$16.66 [Enlarge Picture]

Bearing Cup
- This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$2.50 [Enlarge Picture]

Bearing cone (L44643)
- For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$8.28 [Enlarge Picture]

Bush Hog Axle Spacer Bushing
- Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40)
$6.44 [Enlarge Picture]

Caster Assembly
- Tail wheel & hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1 2" diameter, 8" overall length, 7-1 4" to pin hole. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$172.49 [Enlarge Picture]

Caster Assembly, Old Style
- Tail wheel & hub assembly with grease fitting (4 x 8). Includes Wheel, Hub, Axle Bearing, and Bolt Assembly OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215)
$103.86 [Enlarge Picture]

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)$27.92

HUB with BRG CUPS
- 4-bolt, 5" bolt circle & 3-5 8" wheel pivot hub with bearing cups (1" axel)(Ref #5). This part fits Caster Assembly (Part Number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$44.15 [Enlarge Picture]

Hub Assembly
- Hub with bushings (3 4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 with new style 1-1 4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$34.53 [Enlarge Picture]

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)$40.23

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)$75.38

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)$95.34

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)$98.19

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163)$107.04

Seal, Caster
- Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.20 [Enlarge Picture]

Tail Wheel Assembly
- 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1 2" bolt circle. 5-1 4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$125.98 [Enlarge Picture]

Tail Wheel Assembly
- 4" x 8" tail wheel assembly with laminated tire. 3-5 8" pilot, 4 bolt holes, 5" bolt circle, 3-3 4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH)
$42.90 [Enlarge Picture]

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)$21.27

 
Lights
Bullet Tail Light - For Jetstar, 4 Star, 5 Star, 445, Big Mo 400, Big Mo 500, Big Mo 600. Bullet Tail Light, 6 Volt, with glass lens. (Part No: R4384)$48.60

Halogen Work Light-Double Bulb
- 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$48.63 [Enlarge Picture]

Headlight - 6 Volt-5 3 4 inch diameter. For R, U, Z. Headlight, 6 Volt, 5 3 4" dia. Replaces KT1360. (Part No: R2025)$77.76

Headlight - 12-Volt, 5 3 4 dia. Fits models R Series, U Series, Z Series. Replaces part # 10A3750. (Part No: R2024)$77.76

Light Switch with Knob
- Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$19.56 [Enlarge Picture]

Magnetic worklight Universal Mounting.
- Can be placed anywhere there is a metal surface. 3-1 2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG)
$41.70 [Enlarge Picture]

Portable Halogen Work Lamp
- 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH)
$72.05 [Enlarge Picture]

Portable Halogen Work Lamp
- 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH)
$72.05 [Enlarge Picture]

Safety Light Amber
- 12 volt Amber Safety Light, 4 and a 1 4 dia., 3 8Dia by 5 8 mounting Stud.Does not include Flasher. (Part No: S.61357)
$13.98 [Enlarge Picture]

Tail Light, Bullet
- 12 Volt with Glass Lens. Replaces part # 10A7579. Fits models: Jet star, 4 Star, 5 Star, 445, Big Mo 400, Big Mo 500, Big Mo 600. (Part No: R4383)
$48.60 [Enlarge Picture]

Tail Light, Bullet
- 6 Volts with Glass Lens. Replaces part # 10A7580. Fits model 335. (Part No: R4384)
$48.60 [Enlarge Picture]

Universal 9 Inch Headlight - 12 Volt off-road 100w Q. Halogen large headlight. Black. Single bolt mount. (Part No: B1585)$61.13

Work Lamp, HID, Flood Light
- Universal high intensity discharge flood light, 35W Xenon H3 lamp, size 4.725" W X 4.330" H X 5.512" L, internal ballast, hardened glass lens, far longer life span than halogen 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$120.44 [Enlarge Picture]

Work Light 12V With Switch
- Work light, 12 volt, 3000 candle power, trapezoidal light pattern. On-off switch on back of light housing. Uses 4-1 2" diameter sealed beam lamp, L4411. (Part No: L408-12V)
$28.08 [Enlarge Picture]

Worklight 12 Volt
- Red 12 Volt worklight with handle, on off switch, swivels and rotates. (Part No: S.42792)
$29.93 [Enlarge Picture]

Worklight 12 Volt Black
- 12 Volt worklight with handle, on off switch, swivels and rotates. Mounting Holes measure 4 3.8 center to center. (Part No: S.67771)
$31.65 [Enlarge Picture]

 
Miscellaneous
CabCAM Camera Observation System
- When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof Extension Cables. (Part No: CC7M1C)
$335.61 [Enlarge Picture]

Canopy
- 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$402.16 [Enlarge Picture]

Canopy Mounting Kit, 2 Post
- Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603)
$70.84 [Enlarge Picture]

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604)$61.16

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602)$103.07

Canopy, Small Tractors
- 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$292.51 [Enlarge Picture]

Deluxe Canopy, 3 Bow
- Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R)
$220.12 [Enlarge Picture]

Deluxe Tractor Umbrella
- Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X)
$145.07 [Enlarge Picture]

HAND CLEANER GALLON
- Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$24.48 [Enlarge Picture]

Heater Cab, Custom Tailored
- Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For models G950, G1050, G1350 with regular or tank fenders. (Part No: 1733235)
$306.02 [Enlarge Picture]

Heater Cab, Custom Tailored
- Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For models G350, G450 diesel utility with shell fenders. (Part No: 1213008)
$306.02 [Enlarge Picture]

 
Oil System
Lucas Heavy Duty Oil Stabilizer (quart)
- A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001)
$12.93 [Enlarge Picture]

Oil Filter - For models BF, BFG, Jetstar 3, SP168 Harvester, V. (Part No: APN6731B)$11.54

Oil Filter Element - For models 5 Star, G900, G950, G1000 Vista, G1050, G1350, M5, M602, M604, M607, M670. (Part No: 10A10423)$20.46

 
PTO / Driveline
Driveline Assembly
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3 8 inch 6 spline Q.D. tractor and implement yokes. 1333mm (52-1 2 inch) overall length, end of yoke to end of yoke. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit is 27mm 1.063 (1-1 16) bearing diameter x 74.6mm 2.940 (2-15 16). 1333mm (52-1 2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$164.92 [Enlarge Picture]

Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor & implement yokes. 1-3 8 6 spline Q.D. tractor yoke. 1-3 8 round bore with 1 2 pin hole implement yoke. 1300mm - (51 inch) overall length end of yoke to end of yoke. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit, 27mm - 1.063 (1-1 16) bearing dia. x 74.6mm - 2.940 (2-15 16) overall length (43-3 4) . Verify length before ordering. (Part No: AB4111WY)
$183.74 [Enlarge Picture]

Driveline Assembly with Yokes
- AB4 series. Complete drive shaft assembly with shielding and tractor & implement yokes. 1-3 8 inch 6 spline Q.D. tractor yoke. 1-1 4 round bore with pin hole implement yoke. 1350mm (53) overall compressed length end of yoke to end of yoke. Cross and bearing kit, 27mm - 1.063 (1-1 16) bearing dia. x 74.6mm - 2.940 (2-15 16). Overall length 1350mm (53) ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY125R)
$181.20 [Enlarge Picture]

Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3 8 - 6 spline Q.D. tractor yoke, 1-3 8 - 6 spline ratcheting torque limiter iwth quick disconnect on implement end. 1372mm (54 inch) overall length end of yoke to end of clutch. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit 27mm -1.063 (1-1 16) earing dia. x 74.6mm - 2.940 (2-15 16). 1372mm (54) overall length ***VERIFY LENGTH BEFORE (Part No: AB4111K33)
$278.82 [Enlarge Picture]

PTO Adapter - PTO adapters are located under the PTO category in the Accessories & Universal Parts section. (Part No: MISC)$0.00

PTO Clutch Plate, Driven
- For model G750. (Part No: 159097A)
$24.82 [Enlarge Picture]

PTO Clutch Plate, Driven
- 6-9 16" O.D.. For models Big Mo 400, G1000, G1050, G1350, G950, Jet Star Orchard, Jet Star 3, Jet Star 4, Jet Star 5 Super, M5, M504, M602, M604, (M670 gas & LP SN# up to 29901891, diesel SN# up to 30000819). (Part No: 10P1459)
$32.50 [Enlarge Picture]

PTO Clutch Plate, Driven
- 6.00" O.D.. For models G1000, G1050, G1350, G950, Jet Star 3, (M670 gas & LP SN# up to 29901891, diesel SN# up to 30000819). (Part No: 10P2664)
$20.49 [Enlarge Picture]

PTO Clutch Plate, Driven
- 6.00" O.D., 4.255" I.D.. For model G750. (Part No: 105650A)
$27.65 [Enlarge Picture]

PTO Clutch Spider
- For model G750 SN# 147569 and up. (Part No: 163297A)
$368.09 [Enlarge Picture]

PTO Drive Hub
- That bolts to flywheel, 17 internal spline, 5.375" dia., 6 bolt holes. For models G1355, G955. (Part No: 303083330)
$152.43 [Enlarge Picture]

PTO Safety Clutch, 40 HP
- 1-3 8" 6 spline male and female ends, 6" dia., 40 HP capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$210.57 [Enlarge Picture]

PTO Shaft
- 17 splines, 68.375" long. For models G1355, G955. (Part No: 303075338)
$368.63 [Enlarge Picture]

PTO Shaft, 540 RPM
- 23 spline. For model G750 SN# 147569 and up. (Part No: 158287A)
$159.49 [Enlarge Picture]

PTO, Floating Plate Lever
- For models 335, 445, A4T1400, A4T1600, Big Mo 400, Big Mo 500, Big Mo 600, G1000, G1000 Vista, G1050, G1350, G750, G900, G950, Jet Star 3, Jet Star 3 Super, Jet Star 4, Jet Star 4 Super, Jet Star 5 Super, Jet Star Orchard, M5, M504, M602, 604, M670, M670 Super. (Part No: E1659)
$29.79 [Enlarge Picture]

 
Paint
44 Minute DVD - How to Paint a Tractor
- This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$24.00 [Enlarge Picture]

Acrylic Hardener, 16oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 1 to 2 gallons of unreduced paint. (Part No: TP12P)$44.60

Acrylic Hardener, 8oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 2 quarts to 1 gallon of unreduced paint. (Part No: TP12HP)$27.96

Dakota Prep & Shine, Twin Pack
- Kit inlcudes (1) 16.oz bottle Dakota Prep with spray nozzle, (1) 16 oz. aerosol can Dakota Shine, (2) scrub pads (1) light, (1) aggresive. (Part No: DS2PK)
$38.48 [Enlarge Picture]

Dakota Prep, 1 Gallon
- Dakota Prep is a water-based and biodegradable cleaner that will remove wax buildup, grease, oxidation and grime from a variety of surfaces to renew paint to its previous luster. It is safe on many surfaces including painted surfaces, decals vinyl lettering, plastics, fiberglass, clear coat finishes, aluminum, glass and rubber. (Part No: DP1G)
$83.37 [Enlarge Picture]

Dakota Shine, 1 Gallon
- Dakota Shine is a unique and patented product that will restore the color, lustre and value to faded and oxidized surfaces like paint, decals, plastics, fiberglass, engine compartments and more. The ingredients are designed to penetrate the surface to rejuvinate the pigments to their original, lime-new appearance. No mixing required, quick dry time and no overspray lines to buff out. Used in conjunction with Dakota prep for best results. (Part No: DS1G)
$138.26 [Enlarge Picture]

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL)$42.53

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT)$24.74

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP)$42.52

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL)$71.91

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447QT)$29.91

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447SP)$51.68

Paint, Gloss Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550GAL)$42.24

Paint, Gloss Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550SP)$42.52

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700SP)$42.61

Paint, Prairie Gold, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP520GAL)$94.69

Paint, Prairie Gold, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP520QT)$37.91

Paint, Prairie Gold, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP520SP)$51.68

Paint, Red, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP525GAL)$57.78

Paint, Red, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP525QT)$26.47

Paint, Red, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP525SP)$51.18

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL)$45.50

Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225QT)$25.92

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225SP)$42.52

Paint, Soft Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200GAL)$53.93

Paint, Soft Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200SP)$42.52

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)$65.92

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)$27.81

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT)$95.63

Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844)
$39.95 [Enlarge Picture]

 
Seats
Pan Seat, Universal
- 17 inch wide Gold zinc plated, 3-1 2" center to center on mounting holes, 1 2" by 1 2" center square. (Part No: B1865)
$37.24 [Enlarge Picture]

Seat Back - Black Vinyl on Wood Part Of Three Piece Set For G900, G950, G1000, G1050, Jetstar 3, M670, U302(Each Piece Sold Seperately) (Part No: R1182)$54.00

Seat Back - White Vinyl on Wood Part Of Three Piece Set For G900, G950, G1000, G1050, Jetstar 3, M670, U302(Each Piece Sold Seperately) (Part No: R1185)$58.05

Seat Back, Black
- Black vinyl on wood. For models JetStar, JetStar 2, 4 Star, Super 4 Star, M5, M504, M604, G705, G706, G750, GVI, BigMo 400, BigMo 500, BigMo 600. (Part No: R6205)
$37.50 [Enlarge Picture]

Seat Belt
- Generic Seat Belt Assembly. Ensure this type will work on your tractor before ordering. Retractable belts are also available. (Part No: SBKT)
$23.51 [Enlarge Picture]

Seat Belt
- Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22)
$32.37 [Enlarge Picture]

Seat Belt, Universal - Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT)$23.10

Seat Bottom - Black Vinyl on Wood Part Of Three Piece Set For G900, G950, G1000, G1050, Jetstar 3, M670, U302(Each Piece Sold Seperately) (Part No: R1181)$44.55

Seat Bottom - White Vinyl on Wood Part Of Three Piece Set For G900, G950, G1000, G1050, Jetstar 3, M670, U302(Each Piece Sold Seperately) (Part No: R1184)$51.98

Seat Bumper, Rubber
- Fits tractors with a Knoedler seat, 1.465" long, .635" thick. For models (some) Jetstar, 4 Star, 4 Star Super, GVI, (G705 LP up to sn 23800590), (G705 diesel up to sn 23900898), (G706 LP up to sn 24000305), (G706 diesel up to sn 24100549), G707, G708, G900, G1000, M602, M604, (M670 gas & LP up to sn 29903579 and sn 29904455 and after), (M670 diesel up to sn 30001634 and sn 30002060 and after), U302 with group 1 seat. (Part No: 10P1670)
$14.00 [Enlarge Picture]

Seat Cushion, Black
- Black vinyl, strap-in cushion. For models JetStar, JetStar 2, 4 Star, Super 4 Star, M5, M504, M604, G705, G706, G750, GVI, BigMo 400, BigMo 500, BigMo 600. (Part No: R6220)
$40.50 [Enlarge Picture]

Seat Upper Back - Black Vinyl on Wood Part Of Three Piece Set G900, G950, G1000, G1050, Jet Star3, M670, U302(Each Piece Sold Seperately) (Part No: R1183)$19.63

Seat Upper Back - White Vinyl on Wood Part of Three Piece Set. For models G900, G950, G1000, G1050, Jet Star3, M670, U302 (Each Piece Sold Seperately). (Part No: R1186)$24.75

Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1294.75 [Enlarge Picture]

Seat, Air Suspension, Cloth, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056)
$1405.98 [Enlarge Picture]

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3 4" D). Fits several Commercial Turf Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)$98.77

Seat, Universal
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. (Part No: TS1050ATSP)
$97.65 [Enlarge Picture]

Seat, Universal
- BLUE Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. (Part No: TS1060ATSP)
$93.40 [Enlarge Picture]

Seat, Universal
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$93.40 [Enlarge Picture]

Seat, Universal - Seat assembly, Black leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BK)$106.23

Seat, Universal - Seat assembly, Blue leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BL)$109.62

Seat, Universal - Seat assembly, Yellow leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110YL)$106.23

Seat, Universal INDUSTRIAL with SLIDES
- Seat, universal, non-suspension style seat assembly with slide track for forward rear adjustment. Slotted base for adjusting slide tracks side to side 4" to 10-1 4". Black leatherette upholstery, vacuum formed and watertight for use in all weather conditions. (Part No: TS1036IND)
$70.15 [Enlarge Picture]

Universal Seat
- Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015)
$172.58 [Enlarge Picture]

Universal Seat
- **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Part No: TS1040ATSP)
$97.65 [Enlarge Picture]

 
Sheet Metal / Body Parts
2 Hour DVD - The How To's of Sheetmetal Repair
- This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$24.00 [Enlarge Picture]

Cab Foam Kit Spray Adhesive
- 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140)
$30.09 [Enlarge Picture]

DZUS Fasteners Kit
- Universal Set of 5 fasteners. 1 4 Turn Fasteners. For 13 32 inch holes, Head Diameter is 11 16, springs are 1 7 8 inch in length. Verify size before ordering. (Part No: DZUS2)
$16.00 [Enlarge Picture]

H
- Left or right hand. For models G1355, G955. (Part No: 207000132)
$35.29 [Enlarge Picture]

Pilot Punch Set
- Set contains 12 sizes one of each 1 16, 3 32, 1 8, 5 32, 3 16, 7 32, 1 4, 5 16, 3 8, 7 16, and 1 2. (Part No: RPD112K)
$138.96 [Enlarge Picture]

SAFETY STEP KIT
- Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011)
$51.96 [Enlarge Picture]

Tool Box
- Universal Tool Box 15 1 2" X 4 3 4" X 4 1 4". Painted Red. (Part No: R2685)
$29.40 [Enlarge Picture]

Tool Box, Fender Mount
- This is an aftermarket toolbox designed to mount easily on the fender of most agricultural and industrial tractors. This is an aftermarket item, unlike any original toolboxes, and is meant for working tractors in need of a good toolbox. 18 inches long, 3-5 8" wide and 4-1 2" deep. (Part No: TB100FM)
$43.86 [Enlarge Picture]

Toolbox - Universal style of 11 inches long, 4 inches wide and 4.5 inches tall. Must drill mounting holes to match your tractor. (Part No: ABC308)$37.50

 
Steering
STEERING WHEEL
- Three covered spokes. 17-5 8" diameter, 7 8" - 1" shaft. Tapered & keyed hub. Tractors: G, GB, GTA, GTB, R, RTI, U, UB, Z, ZB. (Part No: 10A8502)
$49.96 [Enlarge Picture]

Spindle Thrust Bearing
- 1.250" I.D.. For models Jet Star 3, Jet Star 4, 335, 445. (Part No: 18560X)
$17.68 [Enlarge Picture]

Spindle, RH/LH
- A= 13.750", B= 1.250", C= 1.375", D= 1.375". For models Jet Star 3, Jet Star 4, 335, 445. (Part No: 11B7436)
$248.14 [Enlarge Picture]

Spindle, RH/LH
- A= 11.50", B= 1.249", C= 1.375", D= 1.375". For models Jet Star 3, Jet Star 4, 335, 445. (Part No: 11B7325)
$184.16 [Enlarge Picture]

Spindle, RH/LH
- A= 13.875", B= 1.375", C= 1.500", D= 1.375". For models M5, 5 Star, 602. (Part No: 11B8726)
$248.52 [Enlarge Picture]

Spindle, RH/LH
- A= 14.312", B= 1.50", C= 1.50", D= 1.375", check upright shaft length and diameter before ordering. For models 670, G1000, (M670 gas & LP SN# 29904455 and up), (M670 diesel SN# 30002310 with type E front axle). (Part No: 11B23096)
$247.56 [Enlarge Picture]

Spindle, RH/LH
- A= 13.875", B= 1.375", C= 1.50", D= 1.375" check upright shaft length and diameter before ordering. For models 670, G1000. (Part No: 11B23156)
$247.56 [Enlarge Picture]

Spindle, RH/LH
- A= 12.50", B= 2.250", C= 2.00", D= 1.50". For models G1350, G1355, G2155, G955, (G1050, G900, G950 all heavy duty). Replaces 11A26941. (Part No: 72160101)
$391.04 [Enlarge Picture]

Steering Wheel
- 16" diameter, 7 8" keyed hub. For model R. (Part No: RT479)
$47.93 [Enlarge Picture]

Steering Wheel - Steering Wheel, 3 spoke. 7 8-15 16 INCH DIAMETER WITH 0.23 INCH KEYWAY Hub. For models Jeststar, Jetstar 2, 335, 445, Jetstar 3, Jetstar 3 Super. Manual steering only. (Part No: 10A7132)$45.52

Steering Wheel - 17-3 4" diameter, keyed hub, 3 covered spokes. For models GVI, G705, G706, G707, G708, Jetstar 3, 4 Star, Super 4 Star, M5, M504, M602, M604, M670. (Part No: 1015446M91)$87.75

Steering Wheel - 15" diameter, 36 spline, 13 16" shaft, 3 covered spokes. For models Jetstar 3, Super Jetstar 3, Super M670, G900, G955, G1000, G1050, G1350, G1355, U302. (Part No: 10A23441)$57.38

Steering Wheel
- For Jetstar, Jetstar 2, U, UB, UB Special, Z, ZB. Steering Wheel. 18" Diamter, 7 8-15 16 INCH DIAMETER WITH 0.23 INCH KEYWAY Hub. (Part No: R3731)
$43.88 [Enlarge Picture]

Steering Wheel Cap - Comes with o-ring, used with 1015446M91 and 10A23441 steering wheels. For models 445, 4 Star, Super 4 Star, Jetstar, 5 Star, M5, M504, G705, G706, G707, G708, GVI, Jetstar 3, G1000, G1050, G1350, G1355, U302, Super Jetstar 3, M670, M602, M604. Replaces 10A14434, 10A22902, 10A14477. (Part No: 10A15590)$46.58

Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$10.00 [Enlarge Picture]

Steering Wheel Spinner, Black
- Comes with mounting hardware. (Part No: R3276)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Yellow
- Comes with mounting hardware. (Part No: R3280)
$11.70 [Enlarge Picture]

Tie Rod Tube
- A= 19.56", B= 11 16" I.D., 18 RH thread. For model G750. (Part No: K6958A)
$59.09 [Enlarge Picture]

 
Tools
*Combination Wrench Set
- 22 pieces SAE Metric. Polished chrome vanadium steel. Metric: 9, thru 19 mm. SAE: 1 4 thru 7 8. Comes with a durable plastic rack for handy storage. LIFE TIME UNLIMITED WARRANTY. (Part No: W1069)
$29.99 [Enlarge Picture]

Adjustable Cylinder Hone Replacement Stones, Coarse
- Set of three 4" coarse textured stones with cotter pins for 900542 cylinder hone. (Part No: 900563)
$17.48 [Enlarge Picture]

Adjustable Cylinder Hone Replacement Stones, Fine
- Set of three 4" fine textured stones with cotter pins for 900542 cylinder hone. (Part No: 900556)
$17.48 [Enlarge Picture]

Adjustable Cylinder Hone Replacement Stones, Medium
- Set of three 4" medium textured stones with cotter pins for 900542 cylinder hone. (Part No: 900549)
$17.48 [Enlarge Picture]

Adjustable Engine Cylinder Hone
- Resurfaces cylinder walls so new rings will seat and eliminate minor cylinder wall imperfections. 2" to 7" diameter range with adjustable tension settings to control the cutting action. Features flexible shaft that will fit any variable speed drill and replaceable 4" stones. Medium texture stones included. Stone replacement part numbers are (900556)Fine textured stones, (900549) medium textured stones and (900563) coarse stones. (Part No: 900542)
$38.37 [Enlarge Picture]

Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)$19.95

Chain Binder
- 1 4" chain binder, 2600 pound load limit. (Part No: LL104)
$36.74 [Enlarge Picture]

Chain Binder
- 3 8" chain binder, 5400 pound load limt. Use with either 5 16" or 3 8" chain. (Part No: LL105)
$41.70 [Enlarge Picture]

Chain Binder
- 1 2" chain binder, 9200 pound load limit. Use with either 3 8" or 1 2" chain. (Part No: LL106)
$78.11 [Enlarge Picture]

Combination Wrench Set
- 11 pieces. Sae sizes 1 4 to 7 8. Chrome vanadium steel construction. Handy storage rack. LIFETIME UNCONDITIONAL WARRANTY. (Part No: W1061)
$21.00 [Enlarge Picture]

Compression Tester
- Checks cylinder compression up to 300 PSI. Fits 14 and 18mm spark plug threads. Equipped with air-hold valve and gauge reset button. 11 inch flexible rubber hose. Complete with instructions. (Part No: W80579)
$32.48 [Enlarge Picture]

Cotter Pin Assortment
- 150 Pieces. Contains sizes of 1 8x2, 5 32x2 1 2, 3 16 x 3, 1 4 x 2, 1 4 x 3, 5 16 x 2 1 2. All in a convenient re-sealable plastic case. (Part No: W5206)
$12.48 [Enlarge Picture]

Cotter Pin Assortment, Small
- 560 piece assortment of 1 16" x 1", 3 32" x 1", 3 32" x 1-1 2", 1 8" x 1-1 4", 1 8" x 2", 5 32" x 2-1 2" all in convenient re-sealable plastic case. (Part No: W5205)
$9.40 [Enlarge Picture]

Diesel Compression Test Kit
- Complete kit with case. 0 to 1000 PSI Gauge (0-700kPA). Includes 9 adapters for popular Domestic, Asian and European vehicles. Will fit the following thread sizes: 24 x 2.00, 12 x 1.25, 10 x 1.25, 10 x 1. Tests compresssion through both flow plug and injector holes. Gauge accuracy + - 2 percent. (Part No: W89731)
$59.95 [Enlarge Picture]

Digital Calipers, Stainless
- High quality hardened stainless steel digital caliper. calculates measurements up to 6" with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$36.11 [Enlarge Picture]

Hair Pin Assortment
- 150 pieces. Includes 6 different sizes from 1 3 16 Length to 2 15 16. All in a convenient re-sealable plastic case. (Part No: W5210)
$8.32 [Enlarge Picture]

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S58474)$249.90

Hobby Tool Kit
- With Carrying Case. Complete Knife kit with two handle styles. Also comes with 3 inch caliper, tweezers, precision screwdriver and 28 blades. (Part No: W1709)
$23.74 [Enlarge Picture]

Hose Clamps Assortment
- 26 pieces. Includes sizes of: 5 8, 7 8, 1, 1 1 16, 1 1 4, 1 1 2 inch. All in a convenient re-sealable plastic case. (Part No: W5348)
$8.06 [Enlarge Picture]

MULTI TESTER
- Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420)
$24.76 [Enlarge Picture]

Main Seal Installer/Remover
- Removes and installs upper rear main seals on many engines without removing engine or crankshaft. Contains corkscrew removal tool, T-handle and wire with clip for pulling new seals into place, 2 extra clips. (Part No: W84019)
$7.10 [Enlarge Picture]

O-Ring Assortment
- 407 pieces. Includes 32 sizes from 1 4 O.D to 2 1 4 O.D. All in a convenient re-sealable plastic case. (Part No: W5202)
$16.36 [Enlarge Picture]

Piston Ring Compressor
- Use to install pistons. Positive compression and adjustable friction brake. Includes instructions. Band diameter from 3.5 to 7 inches (88 to 177mm). (Part No: W80573)
$18.12 [Enlarge Picture]

Piston Ring Groove Cleaner
- Cleans carbon and deposits from ring grooves. Includes two 5 cutter wheels for a total of 10 groove cleaning sizes: SAE: 1 16, 5 64, 3 32, 3 16 and 1 4. Metric: 1.5, 1.75 and 2 mm. (Part No: W80576)
$18.26 [Enlarge Picture]

Rotary Tool Kit
- 80 Pieces. Hand held rotary tool. Turns at 1600 rpm. Contains cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone and drill bits. Great for cutting, grinding, polishing, sharpening and drilling. (Part No: W50083)
$19.00 [Enlarge Picture]

Rubber Grommet Assortment
- 125 pieces in 18 various sizes from 1 8 x 9 32 to 1 inch. All in a convenient re-sealable plastic case. (Part No: W5214)
$9.38 [Enlarge Picture]

Screwdriver Set
- 30 pieces. Contains 7 screwdrivers 1 4 to 6 inch, a magnetic bit driver, 6 precision screwdrivers, 14 power bits. All contained in a Plastic Rack (Part No: W1718)
$23.08 [Enlarge Picture]

Spring Assortment
- 200 pieces. Includes compression type sizes from 9 32 x 1 2 to 7 32 x 1 1 2, extension type from 13 64 x 13 16 to 11 32 x 1 7 16. (Part No: W5200)
$7.98 [Enlarge Picture]

Step Drill Bit Set
- 3 Pieces. Titanium Nitride Coated high speed steel. 1 4 inch shank. Drills holes up to 1 inch. For use with metal, wood or plastic. Starts on contact, no center punch required. Automatically deburrs holes as you drill. (Part No: W9003)
$17.20 [Enlarge Picture]

T-Handle Hex Key Set - 10 Pieces (SAE). High quality carbon steel shafts. Black oxide finish resists corrosion. PVC T-handle grips for added torque and comfort. Sizes: 3 32, 7 64, 1 8, 9 64, 5 32, 3 16, 7 32, 1 4, 5 16 and 3 8 inch. Comes with hand storage rack (mountable). (Part No: W80274)$19.94

Torque Wrench - Micrometer 1 2 inch drive adjustable torque wrench. Chrome plated alloy steel. Reversible ratchet head. SAE and Metric Scale. 10 to 150 lb torque range. 1 lb graduations. (Part No: M200DB)$34.40

Valve Spring Tool
- Compresses springs without removing head. Adjustable cam handle keeps tool correctly adjusted for entire job. Remove lever and turn with socket in confined areas. (Part No: W80567)
$31.24 [Enlarge Picture]

WIRE STRIPPER 4-WAY
- 4-way wire stripper crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223)
$9.88 [Enlarge Picture]

Winch Remote, Wireless
- Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003)
$37.50 [Enlarge Picture]

Winch Set, 2500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0002)
$182.83 [Enlarge Picture]

Winch Set, 2500 Lb
- Universal 12 volt with Hand held remote. (Part No: 3013-0004)
$168.27 [Enlarge Picture]

Winch Set, 3500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0001)
$209.43 [Enlarge Picture]

Winch Set, 3500 Lb
- Universal 12 volt with Hand held remote. (Part No: 3013-0005)
$194.87 [Enlarge Picture]

Wire Terminal Assortment
- 160 piece set. Contains 19 popular sizes and types of wire terminals. All in a convenient re-sealable plastic case. (Part No: W5213)
$15.48 [Enlarge Picture]

Woodruff Key Assortment
- 80 pieces. Includes 10 each of: 3x5x13 mm, 3x6.5x16 mm, 4x5x13 mm, 4x6.5x16 mm, 4x7.5x19 mm, 5x7.5x19 mm, 5x9x22 mm, 6x9x22 mm. All in a convenient re-sealable plastic case. (Part No: W5341)
$11.26 [Enlarge Picture]

 
Wheels
Front Tractor Tires
- We are now offering Front Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. (Part No: FRONT_TIRES)
$0.00 [Enlarge Picture]

Front Wheel Hub
- Includes inner and outer races. For models G1350, G1355, G2155, G955, (G1050, G900, G950 all heavy duty). Replaces 30-3156729. (Part No: 72160484)
$98.78 [Enlarge Picture]

Rear Rim Carriage Head Bolt and Nut
- 2.5 length, 5 8 diameter FF Carriage Head Bolt with nuts. PRICED EACH. **Minimum order is quantity of 6. (Part No: HB250)
$3.25 [Enlarge Picture]

Rear Tractor Tires
- We are now offering Rear Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. (Part No: REAR_TIRES)
$0.00 [Enlarge Picture]

TIRE GAUGE
- Gauge has special oiling & pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350)
$15.48 [Enlarge Picture]

TIRE GAUGE DIAL
- Precision bourdon tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG)
$17.16 [Enlarge Picture]

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Breass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599)$42.82

Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844)
$39.95 [Enlarge Picture]

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q)$21.00

Tire Tube 24 Inch - For 7.5, 8.3, 9.5 x 24 inch tires. (Part No: WHS060)$37.60

Tire Tube 24 Inch - For 11.2, 12.4 x 24 inch tires. (Part No: WHS059)$51.30

Tire Tube 28 Inch - For 11.2, 12.4 x 28 Inch Tires. (Part No: WHS058)$56.55

Tire Tube 28 Inch - For 13.6, 14.9 x 28 Inch Tires. (Part No: WHS061)$79.45

Tire Tube 32 Inch - For 9.5 x 32 Inch Tires. (Part No: WHS062)$56.95

Tire Tube 34 and 36 Inch - For 11.2 or 12.4 x 34 Inch Tires and for 11.2 or 12.4 x 36 Inch Tires. (Part No: WHS063)$59.90

Tire Tube 38 Inch - For 11.2, 12.4 x 38 Inch Tires. (Part No: WHS064)$65.25

Tire Valve Fluid Adapter
- For ballast. (Part No: S.61167)
$27.90 [Enlarge Picture]

Tire and Tube - 400x12 3 Rib Tire with tube. (Part No: 400x12-3)$74.22

Wheel Bearing Kit - Kit conains 1 of each of the following 25877 bearing, 25821 bearing cup, 25580 bearing, 25520 bearing cup, 163101A seal. For models G2155, G955. (Part No: WBKWH1)$26.66

Wheel Bearing Kit - Kit includes: 2)14138A(Cones), 2)14276(cups), 1)10A6828(Seal). For models 335, 445, Jet star 3, Jet star 4. (Part No: WBKWH2)$31.00

Wheel Bearing Kit - Kit contains 1 each of the following 14138A(Bearing), 14276(Cup), 13685(Bearing), 13620(Cup), 10A6828(Seal). For models 5 Star, 602, 670, G1000, M5. (Part No: WBKWH3)$22.00

Wheel Bearing Kit - Kit contains 1 each of the following 2788 bearing, 2720 bearing, LM104949 bearing cone, LM104911 cup, 72161723 seal. For models G1050, G1355, G900, G950. (Part No: WBKWH7)$27.75




PayPal


Customer Service
Monday - Friday
10:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure

  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2014 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.