(800) 853-2651   Cart  View Cart    
Low Prices, Fast Shipping

 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

John Deere A & B Parts
[ Turn Off Pictures ]
 
Brakes
Brake Linings With Rivets
- For 60, 620 HI-CROP, 620 ORCHARD, 630 HI-CROP, 630 ORCHARD, 70 HI-CROP, 720 HI-CROP, 730 HI-CROP, A AFTER SN# 410000, AO AND AR AFTER SN# 250000, G, GH, GN, GW. Brake Linings with rivets. Includes (4) linings and 32 rivets. (Part No: AA4253R)
$32.00 [Enlarge Picture]

Brake Return Spring
- For models 50, B, BO, BR. (Part No: B228R)
$13.50 [Enlarge Picture]

Brake Rivet Tool
- Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1 4" throat, 1 8" dia. rivet punch. (Part No: RIVET_TOOL)
$35.25 [Enlarge Picture]

Brake Rivet Tool, Large
- Larger version of our Brake rivet tool. 3-3 8" deep throat x 2-1 8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$89.00 [Enlarge Picture]

Brake Shoe Lining Kit, Late
- For B after 201000 with 9-3 4" linings, and 50 series. Set of 4 linings and rivets, each lining uses 8 rivets, measures 9.75 inches by 1.5 inches. Used to reline brake shoes. Replaces AB3848R, B223R, B2723R. (Part No: TPAB3849R)
$30.32 [Enlarge Picture]

Liner, Pulley Brake
- For models A, B, 50, 520, 530, 60, 630, 70, 720, 730. *** Enter qty 1 for a set of 2 pads, priced per set. (Part No: RE29790)
$24.36 [Enlarge Picture]

 
Clutch
Clutch Cover
- For A after SN# 648000, G after SN# 13804, 60, 620, 630, 70, 720, and 730. Not painted. This part has an I.D. of 12.1875 inches by 1.0625 inches Thick. Please verify size before ordering. (Springs available as p n R5071 for an additional charge, three required.) Specify in comments section if needed. Also Replaces F821R. (Part No: F821)
$30.00 [Enlarge Picture]

Clutch Cover
- For B (SN# 201000 & UP), 50, 520, and 530. Clutch Cover also replaces B3764R. Not painted. (Part No: B2361R)
$32.00 [Enlarge Picture]

Clutch Cover Spring
- Comes with rivet, 3 required per tractor sold individually. For models A, G, 60, 520, 530, 620, 630. (Part No: A6121R)
$15.19 [Enlarge Picture]

Clutch Disc, Riveted
- Fits B (SN# 201000 & above), 50, 520, 530. (Part No: AB3471R)
$66.56 [Enlarge Picture]

Clutch Drive Disc - Replaces OEM#s A2448R, AA2279R or AA232R. For model A (Serial# 488000 thru 647999), AR, AO (up thru Serial# 273079) (Part No: R2392)$168.75

Clutch Drive Disc
- For models A (From SN# 648000), AO, AR (From SN# 273080). Replaces A4028R, and AA4635R. (Part No: R0725)
$142.72 [Enlarge Picture]

Clutch Drive Disc, Sliding
- For model (B SN# 201000 and up). (Part No: B2358R)
$61.09 [Enlarge Picture]

Clutch Facing
- Pulley clutch facing. Floating: B to 200999, BR, BO. 7-7 8 outside diameter, 4-7 8 inside diameter, 1.5 wide, .15 thick. For B, BO, BR (Part No: B158R)
$17.00 [Enlarge Picture]

Clutch Facing
- Pulley clutch facing. Floating. For models A, G, 60, 70, 620, 630, 720, 730. 10 inch outside diameter, 6-3 4 inch inside diameter, 1.575 inch wide, .15 inch thick. For 60, 620, 630, 70, 720, 730, A, G. PRICE IS FOR ONE CLUTCH FACING. *** MUST BE ORDERED IN QTY OF 2. (Part No: TP-C614R)
$13.80 [Enlarge Picture]

Clutch Operating Bolt
- 3 used per tractor, sold individually. For models (A up to SN# 647999), (AO, AR up to SN# 273079). (Part No: A135R)
$37.50 [Enlarge Picture]

Clutch Operating Bolt
- 3 used per tractor, sold individually. For models (A from SN# 648000 and up), (AO, AR from SN# 273080 and up). (Part No: A4031R)
$37.50 [Enlarge Picture]

Clutch Pin
- Clutch linkage pin. Made in the USA, 1 2" diameter, 1 16" oversized to compensate for wear, use 1 2" drill to ream orginal hole, two used per tractor. For models B, H, 50. (Part No: B178R)
$5.95 [Enlarge Picture]

Clutch Pin
- Clutch linkage pin. Made in the USA, 9 16" diameter, 1 16" oversized to compensate for wear, use 9 16" drill to ream orginal hole, two used per tractor. For models A, D, R, G, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: D1994R)
$8.95 [Enlarge Picture]

Clutch Plate
- For models A and G. (Part No: F195R)
$67.16 [Enlarge Picture]

Clutch Pulley Cover - For Model B up to SN# 200999, BO & BR SN# 325000 & up. 10 Inch Diameter. (Part No: B164R)$34.95

Dog, Clutch
- For models 620, 630, 70, 720, 730, A, AO, AR, D, G, GH, GN, GP, GW. Trhee required per tractor. (Part No: C74R)
$20.68 [Enlarge Picture]

 
Cooling System
Fan Belt
- Drive belt for Generator and water pump. For models A, AO, AR, 60 up to SN# 29999, 70 up to SN# 8099. (Part No: TP-A4287R)
$24.56 [Enlarge Picture]

Fan Drive Disc - For models A, (B SN# 171992 and up), (G SN# 13910 and up), (H SN# 50500 and up), 50, 520, 530, 60, 630, 70, 720, 730. Also replaces B2123R. Measures 3.627 inches O.D., .747 inch Spline diameter, 10 splines, .989 inches thick. 2 Used per tractor, price is each. (Part No: AB3314R)$39.75

Fan Shroud
- For model A after SN# 487999, 60, 620, 630, all Rowcrop, Standard and Orchard. (Part No: AA5817R)
$96.42 [Enlarge Picture]

Magnetic Block Heater - Universal. 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3 4 inches x 3-3 4 inches, delivers 300-400 degrees surface temperature. (Part No: MBH1153)$56.70

Pulley, Water Pump
- 1 2" wide, used on pumps AB262R, AA5570R. For models (50 SN# up to 5016058), (60 SN# up to 6029999), (A SN# 700200 and up), (AO, AR SN# 281400 and up), (B SN# B306600 and up). (Part No: A4283R)
$33.34 [Enlarge Picture]

Radiator Bolt Kit
- For models (Unstyled A SN# 410000 to 476999), (AR SN# 250000 to 271999), (AO SN# 250000 to 271999). THIS KIT INCLUDES THE CORRECT LENGTH OF HARDWARE WHEN ADDING SHUTTERS. (Part No: JDS1051)
$34.90 [Enlarge Picture]

Radiator Bolt Kit
- For models (STYLED A, AN, AW, ANH, AWH SN# 477000 and up), (AR 272000 & up), (AO SN# 272000 & UP). (Part No: JDS1053)
$34.90 [Enlarge Picture]

Radiator Cap
- For models A, B, D, G SN# G1300 to G20202, R, 60. 4-5 16" I.D., 1 2" tall. Used with larger top tank radiator. (Part No: AV1621R)
$29.00 [Enlarge Picture]

Radiator Cap - With Gasket for unstyled models: A, AO, AR, B, BO, BR, D, (G SN# : 4251-12999), GP. Also replaces AA795R. (Part No: AD86R)$96.45

Radiator Core
- For Unstyled A 410000 to SN# 476999, Unstyled AO & AR 410000 to SN# 476999. 18 1 2 inches High x 18 5 16 inches Wide X 5 1 2 inches thick. Note in comments section if you need gasket set #R2175G. (Part No: AA396R)
$248.16 [Enlarge Picture]

Radiator Core
- Radiator Core - Styled A (serial # 488000 up), AR, AR (serial # 260000 up). Gasket (set of 2) p n A2153R has an additional charge. Specify if you need gaskets in "Comments" on order form. (Part No: AA2235R)
$316.58 [Enlarge Picture]

Radiator Filler Neck
- For A, AO, AR, B, G Styled. Radiator Filler Neck. Uses cap AV1621R. (Part No: AB1607R)
$37.50 [Enlarge Picture]

Radiator Gasket Set - For models (A unstyled up to SN# 476999 heavy duty), (AO unstyled heavy duty), (AR unstyled up to SN# 259999 heavy duty). (Part No: A432R)$14.00

Radiator Strap - For Models: 60, 620, 630, 70, 720, 730, A, AO, AR, (G from s n 13000 and up). (Part No: A192R)$20.00

Radiator Strap - For Models: 50, 520, 530, B, BO, BR. (Part No: B398R)$19.68

Upper Water Pipe, Radiator
- O.D. 2-7 8". For models A Styled SN# 488000 and up, can also fit AR Styled SN# 272000 and up if cut to length. Must weld to existing casting. Replaces AA2237R. Made in the USA. (Part No: A2374R)
$58.50 [Enlarge Picture]

Water Pump
- For B with SN# above B306600, 50 with SN# below 5016057, both with pulley width of 1 2". Water pump comes with pulley. (Part No: AB4262R)
$162.68 [Enlarge Picture]

Water Pump, 3/8 in. pulley
- For A (SN# 7002000 & above), AO & AR (SN# 281400 & above), 620, 630, 60. Water Pump comes with 3 8" width Pulley. Comes with by-pass connection. Can be used with or without the by-pass connection. Connection comes plugged. If connection is needed, heat the connection to loosen sealant and twist out plug. (Part No: AA6327R)
$142.35 [Enlarge Picture]

 
Decals and Emblems
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1 2" x 4" black & silver, vinyl cut. (Part No: R4697)$9.30

2 Legged Deer Decal
- John Deere Leaping 2 Legged Deer, 2 1 2" x 3", black & yellow, vinyl cut. (Part No: R4696)
$9.30 [Enlarge Picture]

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 2" x 2 1 2", black & yellow, vinyl cut (Part No: R4695)$9.30

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Part No: R5186)$15.50

2 Legged Deer Decal
- John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Part No: R5187)
$15.50 [Enlarge Picture]

2 Legged Deer Decal
- John Deere leaping 2 legged deer, 9" yellow with black deer on vinyl. (Part No: R5188)
$25.94 [Enlarge Picture]

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with silver deer on vinyl. (Part No: R5189)$15.50

4 Legged Deer Decal
- "John Deere Quality Farm Equipment" 10" on vinyl. (Part No: R5184)
$31.92 [Enlarge Picture]

4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Part No: R5185)$31.92

Loader Decal, Yellow
- Universal John Deere loader decal, 2" x 24". (Part No: JDL2Y)
$14.60 [Enlarge Picture]

 
Drive Train
Countershaft Idler Gear
- For B (From S#201000), 50. Replace OEM Part Number B2417R. (Part No: R0717)
$81.00 [Enlarge Picture]

Flywheel Cover Inspection Plate
- For models A, B, 50, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: AB3579R)
$27.90 [Enlarge Picture]

Gear Shift Knob
- Plastic knob, 3 8" fine thread. For models (A styled from SN# 648000), AR, AO, (B styled from SN# 201000), (G styled from SN# 13000), 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, (820, 830 2-cyl). (Part No: 03501AB)
$9.70 [Enlarge Picture]

Lucas Hub Oil (quart)
- Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$9.06 [Enlarge Picture]

Rear Axle Felt Seal
- 3.50" I.D., 4.683" O.D., .425" thick. For models (A up to SN# 547321, (AN up to SN# 547321), (AW up to SN# 547321), (ANH SN# 583999 & up), (AWH SN# 583999 & up), (60 all Orchard and Standard), (620 Orchard only), (630 Orchard only). (Part No: A380R)
$24.75 [Enlarge Picture]

 
Electrical System
(Starters, Generators, Coils, Wiring, etc.)
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR)$0.00

Alternator Base Bracket Kit - Universal
- Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258)
$39.25 [Enlarge Picture]

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)$106.29

Battery Cable
- Battery Cables: A to SN# 584000, B to SN# 200999, 0 gauge, length 28", terminal type 1-3. (Part No: TP-AA4422R)
$27.12 [Enlarge Picture]

Battery Cable
- For models A to SN# 584000 up, B SN# 201000 up SN# 26001 up, 50, 60, 70D, 520, 620, 720D & 730D with cranking eng. 0 gauge, length 64", terminal type 1-3. (Part No: TP-AB3546)
$39.99 [Enlarge Picture]

Battery Strap
- Battery Ground Straps. A to SN# 676599, B to SN# 286909, G to SN# 51142, 2010. 1 guage, length 13, terminal type Std+. For A, B, G (Part No: TP-AB1833R)
$20.02 [Enlarge Picture]

Battery Strap
- Battery Ground Straps. A to SN# 676000 up, B SN# 286910 up, G SN# 51143 up, R, 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 830, 5010. 1 guage, length 6-1 2, terminal type Std+. For 50, 5010, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830, A, B, G, R (Part No: TP-AB4100R)
$13.52 [Enlarge Picture]

Coil Bracket
- Universal Coil Bracket (Part No: R1940)
$6.61 [Enlarge Picture]

Coil Bracket - Distributor Coil Bracket. For models A, B, G, 50, 60, 70, 520, 530. (Part No: AA4883R)$20.50

Coil, 6V
- Distributor coil, 6 volt. Delco Remy equipped. For models B, M, 40, 50(after 5021479), 60LP, 70LP, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 1020, 2010, 2020, 3010, 3020, 4010, 4020 - DR1115380, 1115381. For 1010, 1020, 2010, 2020, 3010, 3020, 320, 330, 40, 4010, 4020, 420, 430, 440, 50, 520, 530, 60LP, 620, 630, 70, 720, 730, B, M (Part No: TP-AM373T)
$24.48 [Enlarge Picture]

Coil, High Performance (Black), 12 Volt, Oil Filled
- Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511)
$35.99 [Enlarge Picture]

Coil, High Performance (Black), 6 Volt, Epoxy Filled
- Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111)
$39.21 [Enlarge Picture]

Coil, High Performance (Black), 6 Volt, Oil Filled
- Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011)
$32.82 [Enlarge Picture]

Coil, High Performance (Chrome), 12 Volt, Oil Filled
- 12-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501)
$35.99 [Enlarge Picture]

Coil, High Performance (Chrome), 6 Volt, Oil Filled
- 6-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001)
$36.89 [Enlarge Picture]

Coil, Ultra High Performance (Black), Oil Filled
- Pertronix 'Flame Thrower II' Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$35.25 [Enlarge Picture]

Coil, Ultra High Performance (Chrome), Oil Filled
- Pertronix 'Flame Thrower II' Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001)
$39.68 [Enlarge Picture]

Condenser
- For models (A, AO, AR, B, BN, BNH, BW, BWH all styled with distributor SN# XD100 and up) (Part No: K6977)
$14.19 [Enlarge Picture]

Distributor Cap
- 2 Cylinder, Vertical, 12 Volt. Plug connectors on cap are at 90 degrees or 12:00 o'clock and 3:00 o'clock. For Delco distributors up to 1963 on models: A, AR, AO, B, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010, 114W, 116W, 323W. Balers~ 25, 30, 40, For 1010, 105, 114W, 116W, 12, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99, A, AO, AR, B, G, M. (Part No: 1935038)
$10.70 [Enlarge Picture]

Distributor Cap, Horizontal
- For Delco distributor on: A, B, G, 50, 60, 70. (Part No: 1913739)
$27.90 [Enlarge Picture]

Distributor Cap, Vertical, 6 Volt
- Distributor cap, 2 cylinder, vertical, Please note the orientation of the 2 non-plugged terminals on top of the distributor cap (click 'enlarge image'), there are two different orientations available (see Part No: 1935038 for the other orientation). Fits: A, B, G, M, 320, 330, 40, 420, 440, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: 1909008)
$11.26 [Enlarge Picture]

Distributor Cap, Wico
- For All models using Wico distributor, clip type cap. (Part No: AT14190)
$42.21 [Enlarge Picture]

Distributor Dust Cover
- Fits early Delco distributor with clip held cap. For models A, AR, AH, AN, ANH, AO, B, BR, BN, BNH, BW, BWH, G, GN, GW, M, MC, MI, MT, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010. (Part No: 1900119)
$9.90 [Enlarge Picture]

Electronic Ignition Conversion Kit, 12 Volt Negative Ground
- For Tractor Models A, G, and 50, 60, 70 with Delco 1111558 distributor. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system. (Part No: 1121)
$83.12 [Enlarge Picture]

Electronic Ignition Conversion Kit, 12 Volt Positive Ground
- Electronic Ignition Conversion Kit, 12 Volt Positive Ground - Electronic Ignition Conversion Kit - For Tractor Models A, G, and 50, 60, 70 with Delco 1111558. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system. (Part No: 1121P12)
$91.48 [Enlarge Picture]

Electronic Ignition Conversion Kit, 6 Volt Positive Ground
- Electronic Ignition Conversion Kit - For Tractor Models A, G, and 50, 60, 70 with Delco 1111558 distributor. Pertronix Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 6 volt POSITIVE ground system. (Part No: 1121P6)
$91.48 [Enlarge Picture]

Generator Bracket
- For models (A SN# 542718 to 583999), (B 167000 to 200999). (Part No: B2113R)
$117.63 [Enlarge Picture]

Generator Cutout Assembly
- For A and B to 1947. Replaces 1116809DR. (Part No: 1867781)
$27.21 [Enlarge Picture]

Ignition Kit, Delco Clip-Held Distributor Cap
- Contains Points, gauge, condenser. For: A, AR, AO, B, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010(to 42000), 2010(to 42000), 3010 (to 1E32999), 4010(to For 1010, 105, 114W, 116W, 12, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99, A, AO, AR, B, G, M (Part No: ATK1DC)
$10.24 [Enlarge Picture]

Ignition Kit, Delco Clip-Held Distributor Cap
- Contains points, condenser, rotor, and proper point gap gauge. For: A, AR, AO, B, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010(to 42000), 2010(to 42000), 3010 (to 1E32999), 4010(to For 1010), 105, 114W, 116W, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99. (Part No: ATK1DCR)
$11.98 [Enlarge Picture]

Ignition Point Set, WICO DB Distributor
- Point set for DB distributor. For models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A(659290-662873)~ For 1010, 1020, 105, 12, 2010, 2020, 215, 215A, 217, 2510, 299, 323W, 40, 45, 50, 55, 600, 65, 700, 95, 99, A, AO, AR, B. (Part No: AR12003)
$16.96 [Enlarge Picture]

Ignition Point Set, WICO XB Distributor
- Point set for XB distributor on. For models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A(659290-662873. (Part No: AR12014)
$22.74 [Enlarge Picture]

Key Switch, 2 Terminal
- With keys. For models 420, (A from SN# 662874 and up), (AO, AR from SN# 275533 and up), (B from SN# 268820 and up), (G from SN# 46501 and up), 80, (820, 830 2-cylinders). Replaces A4699R, AB4087R, AA5592R. (Part No: AB4063R)
$34.88 [Enlarge Picture]

Light Clamp
- For models A, B, G, H. (Part No: A2613R)
$13.96 [Enlarge Picture]

Magneto Cap - For Wico model C Magneto, tractor models A, AO, AR, B, BO, BR, D, G, H, R. Has "WICO" heat stamped on outer face like original. (Part No: X2938)$62.42

Magneto Cap - For WICO model X, for tractors AO, AR, A, B, BO, BR, D, G, H, R. (Part No: X5643)$44.52

Magneto Cap, 2 Cylinder
- For models using WICO XH magneto ONLY. (Part No: 1006501)
$61.65 [Enlarge Picture]

Magneto Coil - For WICO model X. For tractors A, AO, AR, B, BO, BR, D, G, H, R (Part No: X5700)$66.83

Magneto Condenser
- For Wico C magneto. For models A, AO, AR, B, BO, BR, D, G, GH, L, LA, LI. (Part No: TP-AR31316)
$27.32 [Enlarge Picture]

Magneto Ignition Kit
- Ignition kit, less rotor. Contains:Points, gauge, condenser. 2-piece points using Wico XB Distributor. For A(659290- 662873)~ AR, AO(275397-532), B(268804 and up), 50(5000001 - 5016449). For 50, A, AO, AR, B (Part No: ATK8WXB)
$23.22 [Enlarge Picture]

Magneto Point Set
- For Wico C magneto. For models A, AO, AR, B, BO, BR, D, G, GH, L, LA, LI. (Part No: AR31317)
$16.10 [Enlarge Picture]

Magneto Rotor
- For WICO Magneto. Fits A, AO, AR, D, G, GH, R, All with WICO magneto (SN# XC100>) (Part No: AR31318)
$19.81 [Enlarge Picture]

Magneto Tune Kit - For WICO model C. Tractor Models A, AO, AR, B, BO, BR, D, G, H, L, LA, LI. Contains Points, Condenser and rotor (Part No: R6846)$55.32

Magneto Tune Up Kit
- Fits Wico X, XB, XH, XV magnetos Kits contain heavy duty point set, vibration-resistant condensor, and rotor. For models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. (Part No: 569632)
$46.23 [Enlarge Picture]

Magneto, Early - Complete Magneto for models: A up to SN# 487999, AI, AO SN# 251486-253520, AR SN# 251486-258799, B up to SN# 89999, BI SN# 325600-331499, BO and BR up to SN# 331499, G up to SN# 13000, D SN# 130700 and up, W, WSP. Long prong - 5 8 inch from drive to end of lug. (Part No: XH477B)$414.50

Magneto, Wico XH & XHD, Service & Parts Manual
- Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25 [Enlarge Picture]

Magnetto Coil - For WICO model C magneto. For tractors A, AO, AR, B, BO, BR, D, G, H. (Part No: X2766)$89.54

Solenoid, 6 Volt
- 3 terminal, Delco starters 1107466, 1107474. (Part No: DR1465)
$19.98 [Enlarge Picture]

Spark Plug - Extended tip, 14mm thread, 3 4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)$3.64

Spark Plug - Extended tip, 14mm thread, 3 8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)$3.64

Spark Plug Wire Set, 4 Cylinder, Universal
- For use with Ignitor II high performance electronic ignition conversion kits. (Part No: S.66442)
$14.48 [Enlarge Picture]

Spark Plug Wire Set, Universal, 4 Cyl.
- Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)
$17.22 [Enlarge Picture]

Spark Plug Wire Set, Universal, 6 Cyl.
- Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$20.02 [Enlarge Picture]

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. (Part No: STARTER)$0.00

Starter Drive
- 12 Volt, 10 Teeth. Used with the following starters: 1107127, 1108914, 1108919, 1108950, 1108989 for Model A, G and 60 tractor. (Part No: 1874133)
$36.26 [Enlarge Picture]

Starter Drive - For B, 50. Starter Drive used with Starter 1108155. 9 Teeth. Note: Not a complete starter. (Part No: 1909771)$36.47

Starter Pedal Lever
- For models A, B, H. Starter Pedal Lever. (Part No: A2621R)
$19.69 [Enlarge Picture]

Starter Switch
- Starter Switch button type For 50, 60, 70, A, B, G, R. (Part No: 820052)
$14.00 [Enlarge Picture]

Starter Switch - For models 320, 330, 40, (B before 1947), H, L. Replaces OEM 1882323. (Part No: 1925781)$10.08

Starter, Generator Tag, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.40 [Enlarge Picture]

Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.40 [Enlarge Picture]

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)$25.95

Voltage Reducer with Bracket
- 12 volt to 6 volt. (Part No: S.52671)
$11.82 [Enlarge Picture]

Voltage Regulator
- For B, R, both 1947-1954, 25 combine, 45 combine, 55 combine, 65 combine. 6V Voltage Regulator for use with generators 1100506, 507, 1101390, 397, 1947580. Saddle Mount (Part No: VR1813)
$37.48 [Enlarge Picture]

Voltage Regulator Conversion Kit
- Used with VR1813 and VR1814 regulators when replacing Delco Remy Cutouts 1116766, 1116807, 1116809 and 1116816 or control units 5839, 5851 and 5894, therefore modernizing Generator System. A, AO, AR, B, BO, BR, G, H, L, L For A, AO, AR, B, BO, BR, G, H, L, LA (Part No: VRK1815)
$36.51 [Enlarge Picture]

Voltage Regulator Upgrade Kit, 6 Volt
- For A, AO, AR, B, BO, BR, G, L, LA. Kit includes VR1813 External Voltage Regulator and VRK185 Voltage Regulator Conversion Kit. 6 Volt. For Generators 1101356, 371, 377, 385. Used if replacing Delco Remy Cutouts 1116766, 1116807, 1116809 and 1116816 or control units 5839, 5851 and 5894, therefore modernizing Generator System. (Part No: VR1813_VRK1815)
$62.86 [Enlarge Picture]

Voltage Regulator, 6 Volt
- 6 volt. For models A, 55, 60, 70, 95 tractors. (Part No: 1118790)
$42.73 [Enlarge Picture]

Voltage Regulator, External, 12 Volt
- For 12V A, D, G, 50, 60, 55 Combines, 65 Combines, 95 Combines. Use with generators 1100955, 956, 1101777, 784, 1947579. Replaces regulators 1118266, 306, 791. Saddle Mount. (Part No: VR1816)
$36.51 [Enlarge Picture]

Voltage Regulator, External, 12 Volt
- For 12V A, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, all using generator 1100309. Replaces regulator 1118792. Saddle Mount (Part No: VR1820)
$35.33 [Enlarge Picture]

 
Engine Bearings
Engine Rod Bearing (STD) - For B, BN, BW, all from SN# 96000, 50. Standard size journal measures 2.298. Engine Rod Bearings also available in.010, and .020. If other than standard note size in comments section of order form. 2 required per engine price is for each. (Part No: CB-469P-STD)$30.13

Rod Bearing - For A, AH, AN, and AW S#488000 & up, AO and AR S#260000 & up, and 60. Rod Bearings. Priced Each. 2 Required per engine. Available in Standard, .010 and.020. Specify size in comments section of order form when ordering. (Part No: CB-468P)$24.00

 
Engine Gaskets
Full Gasket Set - For models B, BN, BW (To S#59999)BO, BR (To S#328999). (Part No: FS7381S)$195.14

Full Gasket Set
- For models B, BN, BW (S#96000-#200999). (Part No: FS7513S)
$103.86 [Enlarge Picture]

Head Gasket Set - To SN# 487999. Upper Gasket Set. For models A, AO, AR. Comes with Lead Washers. (Part No: HS7380S)$141.75

Head Gasket Set - For models B, BN, BW (All S#96000-#200999). (Part No: HS7513S)$73.82

Head Gasket Set - For models B, BN, BW (From S#201000). (Part No: HS1738S)$66.29

Overhaul Gasket Set
- For A after serial number 584000. AO, AR SN# 272000 to 281999. Gas 2 Cyl, 321 CID 5-1 2" Bore. Overhaul gasket set 1 used per engine. Does not include Rear Crankshaft Seal Packing. (Part No: FS1699S)
$178.87 [Enlarge Picture]

Overhaul Gasket Set - For B, BN, BW with 2cyl 190 CID Gas after SN# 201000. Full Gasket Set. (Part No: FS1738S)$76.25

Overhaul Gasket Set - For A, AH, AN, and AW up to S#488000 and AO and AR up to S#260000. Full Gasket Set. (Part No: FS7380S)$191.61

Overhaul Gasket Set - For A, AH, AN, and AW S#488000 to 583999 and AO and AR S#260000 to 271999. Full Gasket Set WITH CRANKSHAFT SEALS. (Part No: FS7744-1)$128.99

Overhaul Gasket Set
- For A, AH, AN, AW, all SN# 584000 and up. AO, AR SN# 272000 to 281999. Full Gasket Set (Part No: FS1699S)
$178.87 [Enlarge Picture]

Silicone Black RTV
- Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$7.14 [Enlarge Picture]

Silicone Blue RTV
- Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 F to +500 F, 3.35 oz. tube. (Part No: PRM77BR)
$7.86 [Enlarge Picture]

Silicone Copper RTV
- Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75 F to +700 F, 3 oz. tube. (Part No: PRM101BR)
$11.78 [Enlarge Picture]

 
Engine Overhaul Kits
Lucas Assembly Lube
- Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. Its useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)
$6.71 [Enlarge Picture]

Rebore Kit
- For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1 2" Bore STANDARD. Contains pistons, rings, pins, and retainers. Kit contains taller than stock piston to increase compression. Kit may require boring rod bushing for larger piston pin, pin size 1.750". (Part No: R2457)
$513.00 [Enlarge Picture]

Rebore Kit
- Piston Kit For A, AH, AN, AW (SN# 584001 & up), (AO and AR SN# 272001 & up), and 60. 5-1 2"bore .090 oversize. Contains pistons, rings, pins, and retainers. (Part No: R1978)
$393.75 [Enlarge Picture]

Rebore Kit
- Piston Kit For A, AH, AN, and AW S#584001 & up, AO and AR S#272001 & up, and 60 5 1 2" - Bore STANDARD. Contains pistons, rings, pins, and retainers. (Part No: R2027)
$425.25 [Enlarge Picture]

Rebore Kit
- Piston Kit For A, AH, AN, and AW S#584001 & up, AO and AR S#272001 & up, and 60 5 1 2" bore, .045 oversize. Contains pistons, rings, pins, and retainers. (Part No: R2028)
$425.25 [Enlarge Picture]

Rebore Kit
- Piston Kit For A, AH, AN, and AW S#584001 & up, AO and AR S#272001 & up, and 60 5 1 2" bore, .125 oversize. Contains pistons, rings, pins, and retainers. (Part No: R1979)
$393.75 [Enlarge Picture]

Rebore Kit, .045 Oversize
- Piston Kit For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore, .045 oversize. Contains pistons, rings, pins, and retainers. (Part No: R2030)
$310.50 [Enlarge Picture]

Rebore Kit, .125 Oversize
- Piston Kit For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore, .125 oversize. Contains pistons, rings, pins, and retainers. (Part No: R1981)
$287.50 [Enlarge Picture]

Rebore Kit, Standard
- Piston Kit For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore" STANDARD. Contains pistons, rings, pins, and retainers. (Part No: R2029)
$310.50 [Enlarge Picture]

Valve Train Kit - Kit contains valves, guides, springs and locks. For models (A up to SN# 487999), (AO, AR up to SN# 259999). (Part No: VTKJDA)$297.00

Valve Train Kit - Kit contains valves, guides, springs and locks. For models (A from SN# 488000 and up), (AO, AR from SN# 260000 and up), 60. (Part No: VTKJD60)$263.25

Valve Train Kit - Kit contains valves, guides, springs and locks. For models (B up to SN# 95999), BO, BR. (Part No: VTKJDB)$175.50

Valve Train Kit - Kit contains valves, guides, springs and locks. For models (B from SN# 96000 and up), 50. (Part No: VTKJD50)$162.00

 
Engine Parts
Crankcase Vent Tube - For Models: 60 w o power steering, 620, 630, (A from s n 648000), (AO, AR from s n 273080). (Part No: A4035R)$46.72

Cylinder Head - For models (B unstyled SN# 1000-59999, (BO, BR SN# 325000-328999). Replaces B357R. Comes with Valve guides and Seats only. (Part No: AB311R)$452.25

Flywheel Crank Ratchet - For models (A SN# from 477000 to 583999), (AO, AR from SN# 250000 to 271999), (B from SN# 60000 to 200999), (BO, BR from SN# 325000 and up), (D from SN# 143800 and up), (G from SN# 13000 and up), (H from SN# 27000 and up). (Part No: B1608R)$102.01

Flywheel Ring Gear - For models (B SN# 201000 and up), 50, 520, 530. (Part No: B2462R)$107.33

Flywheel Ring Gear
- For models (A SN# 584000 and up), (AO, AR SN# 272000 and up), 60. (Part No: A3323R)
$114.04 [Enlarge Picture]

Flywheel Ring Gear
- 168 teeth, inside diameter just under 20 inches. For models (A SN# 477000 to 583999), (AO, AR up to SN# 271999), (G, 70, 720, 730 diesel). (Part No: A2238R)
$117.98 [Enlarge Picture]

Valve Guide - For A, AH, AN, AW, all with SN# after 488000. AO, AR both with SN# after 272001. 60. Valve Guide. (Part No: 217-3644)$9.95

Valve Guide - For models (A up to SN# 487999), (AO, AR SN# up to 259999). (Part No: AA4896R)$22.95

Valve Guide - For models (B up to SN# 95999, BO, BR. Replaces AB4058R (Part No: B358R)$13.60

Valve Lock - Pair - For models 60, 620, 630, 720, 730, 80, (820, 830 2 cylinders), (A from SN# 488000), (AO, AR from SN# 260000 and up), R, (70 gas, LP and diesel). (Part No: A2332R)$26.00

Valve Lock Pair - For models (A up to SN# 487999), (AO, AR both up to SN# 259999). (Part No: A130R)$26.00

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). (Part No: Valve-Kit)$0.00

Valve Spring - For models 60, A, AO, AR, R. (Part No: A356R)$24.00

Valve Spring Retainer - For models (A up to SN# 487999), (AO, AR up to SN# 271999), R. (Part No: A245R)$30.00

Valve, Exhaust - For models A, AH, AN, AW, all with SN# after 488000. AO, AR both with SN# after 272001. 60. (Part No: R-A3618R)$29.63

Valve, Exhaust - For models (A up to SN# 487999), (AO, AR up to SN# 259999). Replaces A4739R, AA1811R, AA4959R. (Part No: A588R)$27.23

Valve, Exhaust - For models (B up to SN# 95999), BO, BR. Replaces B2878R. (Part No: B363R)$24.68

Valve, Intake - For models A, AH, AN, AW all with SN# after 488000. AO, AR both with SN# after 272001. 60. Intake Valve. (Part No: R-A4193R)$22.50

Valve, Intake - For models (A up to SN# 487999), (AO, AR up to SN# 259999). (Part No: A454R)$27.20

Valve, Intake - For models (B up to SN# 95999), BO, BR. (Part No: B362R)$24.00

 
Engine Pistons and Sleeves
Piston Groove Cleaner
- For pistons up to 5 1 2 inches. Cleans grooves of 5 64, 3 32, 1 8, 5 32 and 3 16. (Part No: B1SB9055)
$24.95 [Enlarge Picture]

Piston Pin Bushing - For model A with rod no. A2344R, G, 60, 70, 620. (Part No: 828764)$36.88

Piston Pin Bushing - For models B, 50, 520. All with rod nos. B3201R, B3652R, B1770R. 2 Required per engine. (Part No: 814830)$27.58

Piston Ring Compressor
- Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1 2 inches. Range 3 1 2 to 7 inches. (Part No: 900521)
$35.67 [Enlarge Picture]

Ridge Reamer
- Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560)
$63.87 [Enlarge Picture]

 
Engine Rings
Piston Ring Set - Set for 1 engine. Used on engines with 3 Compression rings and 2 Oil Ring at 1 4 inch each, on each piston. For models A, AO, AR. (Part No: 2C722.STD)$147.10

Piston Ring Set, .045 Overbore - For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore".045 oversize. For pistons that use: 4 compression rings at 3 16 inch and 1 oil ring at 5 16 inch. Complete set for 1 engine. (Part No: R2030R)$124.15

Piston Ring Set, .090 - For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore".090 oversize. For pistons that use: 4 compression rings at 3 16 inch and 1 oil ring at 5 16 inch. Complete set for 1 engine. (Part No: 2C4965-090)$124.16

Piston Ring Set, .125 Oversize - For model For B, BN, BR, and BW S#201001 & up, and 50. 4 11 16 bore".125 oversize.. Piston Rings set for 1 engine fits pistons in rebore kit R1981. (Part No: 2C4965.125)$124.16

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3 32"), 4. Number and size of oil rings for each piston (Ex: (1) 5 32"). (Part No: RING-SETS)$0.00

Piston Rings .045 - Piston Ring Set. 1 required for complete engine. 0.045 OVERBORE, standard bore size 5.5", 4 compression rings at .186", 1 oil ring @.3105" on 321 CID gas engine. Fits: 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: PR195-45)$147.02

Piston Rings .090 - Piston Rings Set. 1 required for complete engine. 0.090 OVERBORE, standard bore size 5.5", 4 compression rings at .186", 1 oil ring @.3105" on 321 CID gas engine. Fits: 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: PR195-90)$147.02

Piston Rings .125 - Piston Ring Set - 1 per 2 cyl engine. 0.125 OVERBORE, standard bore size 5.5", 4 compression rings at .186", 1 oil ring @.3105" on 321 CID gas engine. Fits: 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: PR195-125)$147.02

Piston Rings, STD - Piston Ring Set, Complete for 1 engine. 321 CID Gas engine STANDARD 5.5 inch bore, 4 compression rings at .186", 1 oil ring at .3105". Fits: 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: PR195)$138.09

Ring Set - For B, BN gas SN# 201000 UP, 50 gas, 2 Cyl, 190 CID 4-11 16" bore. Set for one engine. Each piston contains 4 compression 3 16, 1 Oil 5 16. (Part No: PRS1239)$124.16

 
Exhaust System
Chrome Curved Exhaust Stack
- For Styled B, 50, 520, 530. Chrome Curved Exhaust Stack. (Part No: R3592)
$128.99 [Enlarge Picture]

Chrome Exhaust Stacks
- Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 (Part No: CHROMEEXHAUST)
$0.00 [Enlarge Picture]

Chrome Straight Exhaust Pipe
- For Styled B, 50, 520, 530. Chrome Straight Exhaust Pipe, 4 bolt flange. (Part No: R3591)
$109.15 [Enlarge Picture]

Exhaust Chrome Curved Stack
- Chrome For Unstyled A, G, 60, 70, 620, 630, 720, 730. 4 inch outside diameter, 24 inch in length. (Part No: R3551)
$128.99 [Enlarge Picture]

Exhaust Chrome Straight Pipe
- Chrome Pipe with 4 bolt flange is 4" O.D. Length 24". For Unstyled A, G, 60, 70, 620, 630, 720, 730 (Part No: R3550)
$109.15 [Enlarge Picture]

Exhaust Pipe
- 2 bolt inlet, 21" vertical length, 19" horizontal length, 1-7 8" outlet O.D. Used with manifold B2179R, AB3980 casting# B2803R and muffler AB2700R. For models B, BN, BNH, BW all with SN# B96000-B200999 built between 1939-1947. (Part No: AB3427R)
$31.83 [Enlarge Picture]

Exhaust Pipe
- 2 bolt inlet, 25" vertical length, 20" horizontal length, 1-7 8" outlet O.D. Used with manifolds B2282R, B2472R, AB3980R casting# B2803R and muffler AB2700R. For models B, BN, BNH, BW. All SN# B201000 and up. (Part No: AB3536R)
$34.26 [Enlarge Picture]

Muffler
- Unstyled (no dent) For models A, G, 620, 70, 720. Replaces AF3770R. (Part No: AA300R)
$46.44 [Enlarge Picture]

Muffler, Vertical
- Vertical muffler with dent, round body 4-Bolt Base plate, 2-1 2" exhaust O.D., ~ 24-1 2" total length~ 3-3 4 body diameter. For tractor models: (A, AR, AN, AW, AWH all 1933-1952), G (SN# 410000> 1938-1953), 60, 70, 620, 720 (gas & all fuel). Replaces AF3770R and R21826. (Part No: AA2214R)
$53.68 [Enlarge Picture]

Muffler, Vertical
- Round body 4-1 4" shell diameter, 4 bolt mounting plate, A= 4-1 2" inlet length, B= backing plate, C= 14-1 2" shell length, D= 2-1 2" outlet length, E= 2-5 8" outlet O.D., F= 21" overall length. For models (A, AN, ANH, AR, AW all SN# 410000 and up), 60, 620, 70, 720. This style is not available from the OEM. (Part No: R21826R)
$38.93 [Enlarge Picture]

Muffler, Vertical
- For models B SN# B96000 and above, BN, BW, 50, 520, 530. Has 4 bolt square mounting flange. (Part No: AB2700R)
$36.40 [Enlarge Picture]

Rain Cap
- This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$9.80 [Enlarge Picture]

Stainless Steel Straight Exhaust Pipe
- For Styled B, 50, 520, 530. Stainless Steel Straight Exhaust Pipe. (Part No: R3548)
$109.15 [Enlarge Picture]

Straight Pipe - Stainless Steel, Straight Stack. Double wall construction with 4 bolt flange. 24 inches tall, 4 inch outside diameter. For models Unstyled A, G, 60, 70, 620, 630, 720, 730. (Part No: R3549)$119.07

Stud Nut, Manifold
- Original 7 16" style with oversized shoulders. For models A, AO, AR, B, BO, BR, H. (Part No: R5294)
$2.00 [Enlarge Picture]

Stud, Manifold
- 7 16" x 5-1 2". For models (A from SN# 410000 to 487999), (AO, AR from SN# 250000 to 259999). Use R5294 nut. (Part No: A125R)
$9.30 [Enlarge Picture]

Stud, Manifold
- 7 16" x 4-3 8". For models A, (AO, AR from SN# 272000 to 281999), B, (BO, BR from SN# 325000 and above), H. Replaces R2622R. Uses R5294 nut. (Part No: A126R)
$9.30 [Enlarge Picture]

Stud, Manifold
- 7 16" x 3-1 2". For models (A from SN# 488000 and above), (AO, AR from SN# 272000 to 281999). Uses R5294 nut. (Part No: A2385R)
$9.30 [Enlarge Picture]

Stud, Manifold
- 7 16" x 4-3 4". For models (A all-fuel from SN# 488000 to 583999), (AO, AR from SN# 250000 to 259999), (B from SN# 1000 to 529999). Uses R5294 nut. (Part No: B359R)
$9.30 [Enlarge Picture]

Stud, Manifold
- 7 16" x 4". For models (B from SN# 6000 and above), (BO, BR from SN# 239000 and up). Uses R5294 nut. (Part No: B1314R)
$9.30 [Enlarge Picture]

 
Fuel System / Air Intake
3-Way Fuel Valve
- Made of brass. For models (A SN# 497590 to 697756), (AR, AO SN# 260000 to 280849), (B SN# 94494 to 305246), (D SN# 148872 to 191777), (H SN# 20650 and up), (G SN# 13000 to 59701). (Part No: AB2805R)
$89.77 [Enlarge Picture]

3-Way Fuel Valve
- For models (A SN# 410859-476999), (B SN# 1000-11621), (D SN# 30400-143799), GP. (Part No: AD680R)
$84.68 [Enlarge Picture]

3-Way Fuel Valve
- For models (AR SN# 250000-259999), (B SN# 11622-59999), (BR SN# 325000 and up), (G (SN# 1000-12999). (Part No: AB609R)
$74.18 [Enlarge Picture]

Air Cleaner Oil Cup - Cup is 4 3 4 inche O.D. at the lip. Fits B SN# 60000 and up, BR-BO SN# 329302 and up, H, 50, 520 and 530. Also replaces AB3477R. (Part No: AB1626R)$27.75

Air Filter, Crankcase
- For models A, D, G. (Part No: D1952R)
$22.50 [Enlarge Picture]

Air Filter, Crankcase
- For models B, H. (Part No: AB233R)
$22.50 [Enlarge Picture]

Carburetor Choke Shaft, DLTX
- Carburetor Choke shaft and lever. For tractors: A, B, G, using Marvel-Schebler carburetor models: DLTX34, DLTX51, DLTX53. For 105, 1207, 1209, 1214, 1217, 1219, 130, 135, 1380, 1480, 183, 220, 230, 240, 330, 335, 375, 385, 430, 435, 45, 480, 483, 485, 530, 535, 55, 6602, 78, 95. (Part No: AR10043)
$38.52 [Enlarge Picture]

Carburetor Float, DLTX
- For Early A, Early B, D, GP, G. Carburetor Float for use with DLTX10, DLTX15, DLTX17, DLTX18, DLTX19, DLTX24, DLTX34, DLTX38, DLTX41, DLTX51, DLTX53, DLTX63. (Part No: AR10066)
$29.95 [Enlarge Picture]

Carburetor Float, DLTX
- For A, AO, AR, B with Marvel-Schebler Carburetors DLTX13, DLTX67, DLTX71, DLTX72, DLTX73. (Part No: AR10068)
$36.75 [Enlarge Picture]

Carburetor Kit, Basic
- Kit for Marvel DLTX18, DLTX38, DLTX41, DLTX53, DLTX71, DLTX72, DLTX19, DLTX24, DLTX39, DLTX51, DLTX10, DLTX34, DLTX67, DLTX73, DLTX3, DLTX63, DLTX6, DLTX31, DLTX8, DLTX11, DLTX13, DLTX5, DLTX16, DLTX15, DLTX17, carbs used on A, B, D, G, GP. (Part No: MS104)
$28.00 [Enlarge Picture]

Carburetor Repair Kit
- Basic carburetor repair kit contain needle float valve, throttle shaft, float lever shaft and gasket set. Sold with stainless steel, hard chrome needle. Carburetor manufacture numbers: DLTX15, DLTX17, DLTX18, DLTX19, DLTX24, DLTX33, DLTX41, DLTX51. For A, G, GM, GP (Part No: BK32)
$25.34 [Enlarge Picture]

Carburetor Throttle Lever - For Models: A, B, G. Fits Marvel Schebler carbs DLTX8, DLTX18, DLTX24, DLTX33, DLTX34, DLTX51, DLTX53. Replaces AR10026R. (Part No: AR10023R)$46.71

Choke Cable
- Universal choke cable 72 inches long, 7 16 inch thread dia. (Part No: CC72)
$15.22 [Enlarge Picture]

Choke Knob
- For models A, B, D, G, H, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 820, 830. (Part No: B1951R)
$15.00 [Enlarge Picture]

Fuel Cap
- Unstyled (no lettering), 2-11 16" I.D. x 5 8" Height. For models A, B, D, G (Part No: AD709)
$10.00 [Enlarge Picture]

Fuel Cap, Vented
- For models A, B, G, H, 50, 60, 70, Says Buy Clean Fuel, Keep it Clean . 2 notch cap for a 2 inch tank inlet. (Part No: AD709R)
$14.08 [Enlarge Picture]

Fuel Control Rod - For Models: (A hand start from s n 477000 to 497589), (B hand start from s n 60000 to 94493). (Part No: B1447R)$43.20

Fuel Control Rod - For Models: (A electric start from s n 497590 to 583999), (AR electric start up to s n 259999), (G from s n 13000 and up). (Part No: A2291R)$34.79

Fuel Filter, In-Line, 1/4 inch
- Inlet 1 4, outlet 1 4, O.D. 1-29 32, length 4-1 16. (Part No: 6511393)
$6.92 [Enlarge Picture]

Fuel Filter, In-Line, 3/8 inch
- Inlet 3 8, outlet 3 8, O.D. 1-29 32, length 3-7 8. (Part No: BF836)
$6.28 [Enlarge Picture]

Fuel Filter, In-Line, 5/16 inch
- Inlet 5 16, outlet 5 16, O.D. 1-29 32, length 4-5 32. (Part No: BF840)
$6.22 [Enlarge Picture]

Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$29.99 [Enlarge Picture]

Fuel Tank Liner Kit
- Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$65.00 [Enlarge Picture]

Fuel Tank Repair Kit
- Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3 8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180)
$27.62 [Enlarge Picture]

Fuel Tank Webbing, 3 Ft
- Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494)
$8.38 [Enlarge Picture]

Lucas Fuel Treatment (quart)
- Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$9.97 [Enlarge Picture]

Sediment Bowl Assembly
- Large Bowl. 1 8 inch pipe thread inlet. For models A, B, 60, 620, 70, 720, 730, 80, 820, 830. Fuel Strainer assembly with 2.25" bowl. (Part No: S.61581)
$25.04 [Enlarge Picture]

Sediment Bowl Assembly
- Cast top with glass bowl, all fuel style for use with 3-way valve. For models AO, AR, B, BO, BR, D, G, GP, H. (Part No: AA499R)
$43.88 [Enlarge Picture]

Sediment Bowl Assembly Glass Bowl - Fits S.61581 fuel strainer. For models A, B, 60, 620, 70, 720, 730, 80, 820, 830. (Part No: S.65504)$6.74

Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1 8" diameter, 2.150" O.D., Made in the USA. (Part No: C1778R)
$1.50 [Enlarge Picture]

Throttle Handle
- Throttle handle for John Deere models A (after serial #584000) and B (after serial #201000) (Part No: B2536R)
$47.09 [Enlarge Picture]

 
Gaskets
Gasket Material, Cork Rubber
- 3 32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR332)
$10.95 [Enlarge Picture]

Gasket Material, Cork Rubber
- 1 16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116)
$13.75 [Enlarge Picture]

Gasket Material, Exhaust Manifold
- 1 16" thick x 12" wide x 28-1 2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$19.95 [Enlarge Picture]

Gasket Paper, .0160
- .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$14.90 [Enlarge Picture]

Gasket Paper, .0275
- .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$22.90 [Enlarge Picture]

 
Gauges
Amp Gauge
- For models A, B, D, G, H. Amp Gauge has 'JOHN DEERE' printed on a White Face. Replaces AF2749R. (Part No: R3802)
$29.38 [Enlarge Picture]

Amp Gauge - For models A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720, 730, 820, 830. Gauge has 'JOHN DEERE' printed on a Black Face. Replaces AF2749R. (Part No: R3803)$29.38

Hour Meter
- DC voltages from 12V thru 36V nominal. Heavy duty glass-reinforced polyester body. Internal shock shields & grommets protect movement from shock & vibration damage. Fits 2-1 4" opening, three(3) mounting screws with nuts and two(2) blade terminals included. (Part No: HM771)
$43.69 [Enlarge Picture]

Hourmeter, Analog
- 2", black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40 [Enlarge Picture]

Oil Gauge Copper Line Kit
- Universal, for tractors using 1 8 x 6 ft. copper oil line. Includes 6 Ft 1 8 Line, 2 x 5 16 -24 UNF Nuts, 2x Compression sleeves, and a 1 8-27 NPTF Female to 5 16-24 UNF male adapter. (Part No: UNI523)
$22.75 [Enlarge Picture]

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1 8" pipe thread to 1 8" tube. Brass. (Part No: 919095)$14.35

Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1 8" pipe thread to 1 4" tube. Brass. (Part No: IHS626)
$14.35 [Enlarge Picture]

Oil Pressure Gauge
- Universal Complete assembly with oil tube and mounting hardware, Lighted. 80 psi. Line uses 1 4 inch connection with adapters for 3 8 and 1 2 inch. (Part No: SSW0002)
$15.95 [Enlarge Picture]

Oil Pressure Gauge
- For models A, B, D, G, UNSTYLED. Oil Pressure Gauge with 'JOHN DEERE' printed on White Face. Without Studs. (Part No: R3799)
$29.38 [Enlarge Picture]

Oil Pressure Gauge - For models A, B, D, G, STYLED. Oil Pressure Gauge with 'JOHN DEERE' printed on White Face. With Studs. (Part No: R3800)$29.38

Tachometer Bracket
- For models 50, (A from SN# 648000 and above), (B from SN# 201000 and above), (AO, AR from SN# 272000 and above), 60. (Part No: A4875R)
$24.95 [Enlarge Picture]

Tachometer Cable
- For models 50, (A from SN# 648000 and above), (AO, AR from SN# 272000 and above), (B from SN# 201000), G, 60, (70 gas). Replaces AB4765R, AB4776R. (Part No: AB4737R)
$43.59 [Enlarge Picture]

Temperature Gauge
- Universal water Temperature gauge(0-280 degree scale). Fits model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1 2 inch or 3 4 male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.85 [Enlarge Picture]

Temperature Gauge, Universal
- For 2" mounting hole. Complete assembly with bracket and adapters for block. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77" capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$25.30 [Enlarge Picture]

Water Temperature Gauge - Black face. 72 inch lead. Says "John Deere". 140-230. For models A, AR, B, D, G, M, R, 40, 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840. Also replaces AA6295R, AA7263R, AM2444T, AT13849T, AR20783R. (Part No: AR490R)$49.95

Water Temperature Gauge
- For A, B, D, G, H. Water Temperature Gauge, 'JOHN DEERE' printed on White face. Includes 36" lead. (Part No: R3811)
$29.01 [Enlarge Picture]

Water Temperature Gauge
- For models A, B, D, G, H. Water Temperature Gauge, 'JOHN DEERE' printed on White face. Includes 72" lead. (Part No: R3812)
$29.01 [Enlarge Picture]

 
Hitch / Drawbar
3 Point Conversion Kit
- For models 50, 60, A, B, G, 70. Cat. I II If tractor is A SN# 561903 and below or a B 186134 and below or a G 18700 and below: a later model drawbar support bracket must be installed. ALLOW 2 TO 4 WEEKS DELIVERY TIME. Additional charges apply. Call 1-800-853-2651 for rates. Typical freight is $100.00. (Part No: HK203)
$903.07 [Enlarge Picture]

Center tube, Stablizer
- Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)
$17.62 [Enlarge Picture]

Check Chain & Pin Kit
- Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A)
$7.96 [Enlarge Picture]

Drawbar Pivot Pin - For models 320, (A from SN# 561903 and above), (B from SN# 186134 and above), 50, 520, 530, 60, (620 up to SN# 13099), 40, 330, 420, 430, (M, MT with swinging drawbar). Replaces B2198R. (Part No: AA5365R)$34.79

HAIR PIN ASSORTMENT
- 15-piece assortment. Includes four(4) of HP-3 (wire dia 3 16, length 3.75), four(4) of HP-4 (wire dia 5 32, length 2 15 16), four(4) of HP-5 (wire dia 1 8, length 2 9 16), and three(3) of HP-6 (wire dia 3 32, length 1 5 8). (Part No: HPA15X)
$46.86 [Enlarge Picture]

HITCH BALL 10000LB 2-5/16
- 2-5 16 BALL SIZE, 1-1 4STUD THREAD, 2-1 2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85 [Enlarge Picture]

HITCH BALL 15000LB 2-5/16
- 2-5 16 BALL SIZE, 1-3 8STUD THREAD, 2-5 8 STUD LENGTH, 15000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)
$23.40 [Enlarge Picture]

HITCH BALL 2000LB
- 1-7 8 BALL SIZE, 3 4 STUD THREAD, 1-3 4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)
$12.30 [Enlarge Picture]

HITCH BALL 3500LB
- Hitch ball. 2" ball size, 3 4" stud thread, 1-7 8" stud length, 3500 lb. max load capacity, one two chrome hitch ball class. (Part No: CHB234)
$12.64 [Enlarge Picture]

HITCH BALL 5000LB
- Hitch ball. 2" ball size, 1" stud thread, 2-1 8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$14.44 [Enlarge Picture]

HITCH BALL 5000LB 2-5/16
- Hitch Ball, 2-5 16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$20.52 [Enlarge Picture]

LINCH PIN
- Package of 10 linch pins. Pin diameter 1 4 inch, useable length 1 1 4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$4.90 [Enlarge Picture]

LINCH PIN
- Package of 10 linch pins. Pin diameter 5 16 inch, useable length 1 1 4 inch, Ring diameter 1 5 8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516)
$4.00 [Enlarge Picture]

LINCH PIN
- Package of 10 linch pins. 7 16" dia. pin x 1-3 4" useable length, 1-5 8" dia. ring. Enter 1 for package of 10. (Part No: DKLP91)
$3.90 [Enlarge Picture]

LINCH PIN
- LINCH PIN Package of 10 linch pins. 3 16" O.D. pin x 1-1 4" Long.***Enter 1 for package of 10** (Part No: DKP316)
$3.90 [Enlarge Picture]

Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7 8" mounting pins and adapter bushings, 27-1 4" width, 3-1 2"x 3-1 2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$284.34 [Enlarge Picture]

Universal Drawbar Lock
- For CAT I drawbars only (drawbars that are 1" thick x 2-1 2" width) . Prevents drawbar from rotating. (Part No: 49A29)
$26.72 [Enlarge Picture]

Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1 2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$27.98 [Enlarge Picture]

Universal Stabilizer Chain Kit
- Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch - usually used on larger tractors - VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. (Part No: SK102CH)
$47.67 [Enlarge Picture]

 
Hydraulic System
Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Parts)$00.00

 
Implements
AXLE BOLT
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$18.22 [Enlarge Picture]

AXLE NUTS (5)
- 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.58 [Enlarge Picture]

BLADE BOLT KIT
- For rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1 8-12 inch, B = 3 1 2 inch, C = 1 3 8 inch, D = 1 inch, E = 9 16 inch, F = 1 2 inch, G = 2 1 2 inch, H = 1.492 (for 1 1 2 Blade Hole), I = 1.12 inches. Contains (BH2500) hardware for 2 blades. (Part No: 63607)
$16.66 [Enlarge Picture]

Bearing Cup
- This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$2.50 [Enlarge Picture]

Bearing cone (L44643)
- For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$8.28 [Enlarge Picture]

Bush Hog Axle Spacer Bushing
- Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40)
$6.44 [Enlarge Picture]

Caster Assembly
- Tail wheel & hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1 2" diameter, 8" overall length, 7-1 4" to pin hole. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$172.49 [Enlarge Picture]

Caster Assembly
- Tail wheel & hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1 2" diameter, 8" overall length, 7-1 4" to pin hole. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$172.49 [Enlarge Picture]

Caster Assembly, Old Style
- Tail wheel & hub assembly with grease fitting. 4 x 8 inch rim, 15 inch O.D. of wheel. Includes Wheel, Hub, Axle Bearing, and Bolt Assembly.OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215)
$103.86 [Enlarge Picture]

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)$27.92

HUB with BRG CUPS
- 4-bolt, 5" bolt circle & 3-5 8" wheel pivot hub with bearing cups (1" axel)(Ref #5). This part fits Caster Assembly (Part Number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1311)
$44.15 [Enlarge Picture]

Hub Assembly
- Hub with bushings (3 4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 with new style 1-1 4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$34.53 [Enlarge Picture]

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)$40.23

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)$75.38

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)$95.34

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)$98.19

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163)$107.04

Seal, Caster
- Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.20 [Enlarge Picture]

Tail Wheel Assembly
- 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1 2" bolt circle. 5-1 4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$125.98 [Enlarge Picture]

Tail Wheel Assembly
- 4" x 8" tail wheel assembly with laminated tire. 3-5 8" pilot, 4 bolt holes, 5" bolt circle, 3-3 4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH)
$42.90 [Enlarge Picture]

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)$21.27

 
Lights
Bullet Tail Light
- For A after SN# 584000 and G after SN# 26000. Bullet Tail Light 12 Volt with glass lens. 3 1 2 inches Long. (Part No: R4383)
$48.60 [Enlarge Picture]

Dash Light - 6 Volt - For JD B, BR, D, AR, R, 70D, 80. (Part No: AD2835R-6V)$19.90

Halogen Work Light-Double Bulb
- 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$48.63 [Enlarge Picture]

Headlight
- For A, AO, AR, B, D, G, H, R, 50, 60, 70. Tear Drop Headlight, 12 volt, 5" Diameter. Also replaces AF3816R. (Part No: AF710R)
$59.87 [Enlarge Picture]

Headlight
- HEADLIGHT, Teardrop - 6 Volt - 5 inch Diameter For models A, AO, AR, B, D, G, H, R, 50, 60, 70. Also replaces OEM# AF3817R. Restoration Quality. (Part No: AA3075R)
$31.00 [Enlarge Picture]

Headlight Lens
- Replacement glass lens is 4.75 inch outside diameter for headlamp assemblies AA3075R, AF3817R. For models A, B, D, R, 70D, 80, 820, 830. (Part No: GC200)
$13.66 [Enlarge Picture]

Headlight, 12 Volt
- 7", with "guide" name. For models (A SN# 477000-500011), (AO, AR SN# 250000-259999), (B SN# 60000-95999), (BO, BR SN# 325000 and up), (D SN# 35310-188057). Replaces AB3144R, AD2450R, AD2451R. (Part No: AB3145R)
$85.80 [Enlarge Picture]

Headlight, 6 Volt
- 7", with "guide" name. For models (A SN# 477000-500011), (AO, AR SN# 250000-259999), (B SN# 60000-95999), (BO, BR SN# 325000 and up), (D SN# 35310-188057). Replaces AB3145R, AD2450R, AD2451R. (Part No: AB3144R)
$85.80 [Enlarge Picture]

Knob, Light Switch - Work or tail light knob. For models A, B, D, G, R. (Part No: AA5332R)$5.56

Lens
- Lens, combination front or rear light, 5 diameter, for light TP-AA3075R on tractors: A, B, D, G, R, 70D, 720D, 730D, 80, 820, 830.* Manufactured to restoration standards. For 70, 720, 730, 80, 820, 830, A, B, D, G, R (Part No: TP-A2731R)
$24.10 [Enlarge Picture]

Lens - For 7 inch Teardrop Lights. For models A, AO, AR, B, BO, BR, D (Part No: R4242)$23.40

Light Bracket, Headlight - For A from SN# 477000 to 500011. For AO and AR up to SN# 276799. For B from SN# 60000 to 95999. For BO and BR after SN# 325000. For models D, 80, 820, 830. Light Bracket. (Part No: D2914R)$49.61

Light Bracket, Headlight - For models A after SN# 584000, B after SN# 243385. Light Bracket. (Part No: A3353R)$41.85

Light Bracket, Rear - For models A from SN# 477000 to 5000011. For B from SN# 60000 to 95999. For D after SN# 143800. Rear Light Bracket. (4244R). (Part No: B1601R)$77.96

Light Bracket, Rear
- For A from SN# 500012 to 583999. For B from SN# 96000 to 200999. For G from SN# 13000 to 25999. Rear Light Bracket. (Part No: A2612R)
$62.84 [Enlarge Picture]

Light Switch with Knob
- Switch for models A, B, D, G, R. Also replaces AA4982R. (Part No: AA4667R)
$19.56 [Enlarge Picture]

Light Switch, 3-Position
- For models A, B, D, G, H, L, LA. Replaces AB2687R, AF687R, AL2857T. (Part No: 70208197)
$44.92 [Enlarge Picture]

Magnetic worklight Universal Mounting.
- Can be placed anywhere there is a metal surface. 3-1 2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG)
$41.70 [Enlarge Picture]

Portable Halogen Work Lamp
- 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH)
$72.05 [Enlarge Picture]

Rear Combo Light - For A after SN# 584000, G after SN# 26000 12V Rear Combo Light, 5". (Part No: AA4791R)$81.14

Red Light with Brass Ring
- For models A, B, G, R, 40, 320, 420, 430, 50, 60, 70, 80, 520, 530, 620, 720, 730, 82, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: AA925R)
$13.80 [Enlarge Picture]

Ring
- Moulding trim ring for headlights or rear lights, for light TP-AA3075R.* Manufactured to restoration standards. For models 70, 720, 730, 80, 820, 830, A, B, D, G, R. (Part No: TP-AA3241R)
$25.10 [Enlarge Picture]

Safety Light Amber
- 12 volt Amber Safety Light, 4 and a 1 4 dia., 3 8Dia by 5 8 mounting Stud.Does not include Flasher. (Part No: S.61357)
$13.98 [Enlarge Picture]

Tail Light
- For A after SN# 584000, G after SN# 26000 12V Tail Light, 5". Picture shows two for clarity but price is for ONE light. (3863R) (Part No: AA3867R)
$67.55 [Enlarge Picture]

Tail Light - with Bullet Tail Light
- For A after SN# 584000, G after SN# 26000 12V Tail Light, 5" with Bullet Tail Light. (3864R) (Part No: AA4529R)
$106.61 [Enlarge Picture]

Tail Light, Bullet Shape - For B from SN# 201000 and R. Bullet Tail Light, 6 Volt, with glass lens. (R4384) (Part No: AB3976R)$59.90

Tail Light, Combo Light - For models B after SN# 201000, R. 6V Rear Combo Light, 5". (Part No: AB4037R)$81.14

Tail Light, White - For B after SN# 201000, R. 6 volt, 5 inch diameter Tail Light. Used in combination with the Bullet Tail Light. (3866R) (Part No: AB3549R)$63.25

Tail Light, White
- For B after SN# 201000, R. 6 volt, 5 inch diameter. Tail Light used in combination with the Bullet Tail Light. (Part No: AB3975R)
$60.37 [Enlarge Picture]

Universal 9 Inch Headlight - 12 Volt off-road 100w Q. Halogen large headlight. Black. Single bolt mount. (Part No: B1585)$61.13

Work Lamp, HID, Flood Light
- Universal high intensity discharge flood light, 35W Xenon H3 lamp, size 4.725" W X 4.330" H X 5.512" L, internal ballast, hardened glass lens, far longer life span than halogen 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$120.44 [Enlarge Picture]

Work Light 12V With Switch
- Work light, 12 volt, 3000 candle power, trapezoidal light pattern. On-off switch on back of light housing. Uses 4-1 2" diameter sealed beam lamp, L4411. (Part No: L408-12V)
$28.08 [Enlarge Picture]

Work Light 12V With Switch
- Work light, 12 volt, 3000 candle power, trapezoidal light pattern. On-off switch on back of light housing. Uses 4-1 2" diameter sealed beam lamp, L4411. (Part No: L408-12V)
$28.08 [Enlarge Picture]

Worklight 12 Volt
- Red 12 Volt worklight with handle, on off switch, swivels and rotates. (Part No: S.42792)
$29.93 [Enlarge Picture]

Worklight 12 Volt Black
- 12 Volt worklight with handle, on off switch, swivels and rotates. Mounting Holes measure 4 3.8 center to center. (Part No: S.67771)
$31.65 [Enlarge Picture]

 
Miscellaneous
Cab Foam Kit - With Headliner 7-Piece - Black For models with 1300 Series Hiniker Cab (Part No: R1235)$317.90

Cab Foam Kit
- With Headliner 10-Piece - Black For models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R1236)
$330.43 [Enlarge Picture]

Cab Foam Kit - 7-Piece - Black For models with Hinson Cab. (Part No: R3247)$317.90

CabCAM Camera Observation System
- When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof Extension Cables. (Part No: CC7M1C)
$339.62 [Enlarge Picture]

Canopy
- 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$402.16 [Enlarge Picture]

Canopy Mounting Kit, 2 Post
- Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603)
$70.84 [Enlarge Picture]

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604)$61.16

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602)$103.07

Canopy, Small Tractors
- 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$350.00 [Enlarge Picture]

Deluxe Canopy, 3 Bow
- Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R)
$220.12 [Enlarge Picture]

Deluxe Tractor Umbrella
- Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X)
$145.07 [Enlarge Picture]

HAND CLEANER GALLON
- Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$24.48 [Enlarge Picture]

Heater Cab, Custom Tailored
- Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For models A, B, G, 50. (Part No: 1212331)
$306.02 [Enlarge Picture]

Umbrella Bracket Assembly - For models with Battery Box Mounted Seats: 50, A, 60, B, G, 520, 530, 620, 630, 70, 720, 730, 80, 820 2 cylinder, 830 2 cylinder, R. (Part No: AA4206R)$88.09

Umbrella Bracket Assembly - For models A, AO, AR, B, BO, BR, D, G, GP, H, L, LA, LI. (Part No: F517A)$63.28

 
Oil System
Compression Relief Petcock - Brass. For A, B, D, G and GP series. (Part No: AB1898R)$44.97

Lucas Heavy Duty Oil Stabilizer (quart)
- A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001)
$12.93 [Enlarge Picture]

Oil Filter
- Oil filter element, cartridge type. For tractors: A, B, D, G, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4030 gas, crankcase. (Part No: AR26350)
$8.12 [Enlarge Picture]

Oil Pump Drive Shaft Coupling
- For models A series after sn 424025, B series, G series, 50, 60, 70 gas, 520, 530, 620, 630, 720 gas, 730 gas. (Part No: B250R)
$19.95 [Enlarge Picture]

Oil Pump Shaft
- Late style without keyway. For All Models SN# up to 214999 with 6.404D early power booster 6 cyl engine. (Part No: R64568)
$106.70 [Enlarge Picture]

 
PTO / Driveline
Driveline Assembly
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3 8 inch 6 spline Q.D. tractor and implement yokes. 1333mm (52-1 2 inch) overall length, end of yoke to end of yoke. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit is 27mm 1.063 (1-1 16) bearing diameter x 74.6mm 2.940 (2-15 16). 1333mm (52-1 2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$164.92 [Enlarge Picture]

Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor & implement yokes. 1-3 8 6 spline Q.D. tractor yoke. 1-3 8 round bore with 1 2 pin hole implement yoke. 1300mm - (51 inch) overall length end of yoke to end of yoke. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit, 27mm - 1.063 (1-1 16) bearing dia. x 74.6mm - 2.940 (2-15 16) overall length (43-3 4) . Verify length before ordering. (Part No: AB4111WY)
$183.74 [Enlarge Picture]

Driveline Assembly with Yokes
- AB4 series. Complete drive shaft assembly with shielding and tractor & implement yokes. 1-3 8 inch 6 spline Q.D. tractor yoke. 1-1 4 round bore with pin hole implement yoke. 1350mm (53) overall compressed length end of yoke to end of yoke. Cross and bearing kit, 27mm - 1.063 (1-1 16) bearing dia. x 74.6mm - 2.940 (2-15 16). Overall length 1350mm (53) ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY125R)
$181.20 [Enlarge Picture]

Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3 8 - 6 spline Q.D. tractor yoke, 1-3 8 - 6 spline ratcheting torque limiter iwth quick disconnect on implement end. 1372mm (54 inch) overall length end of yoke to end of clutch. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit 27mm -1.063 (1-1 16) earing dia. x 74.6mm - 2.940 (2-15 16). 1372mm (54) overall length ***VERIFY LENGTH BEFORE (Part No: AB4111K33)
$278.82 [Enlarge Picture]

PTO Flipper Guard - (A from SN# 523600) and up, (B from SN# 149700), (G from SN# 43352), 50, 60, 70, (70D with Non-live PTO & Non hydraulics). (Part No: AA3522R)$36.75

PTO Flipper Guard Spring - For models (A from SN# 523600) and up, (B from SN# 149700), (G from SN# 43352), 50, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: F711R)$10.00

PTO Safety Clutch, 40 HP
- 1-3 8" 6 spline male and female ends, 6" dia., 40 HP capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$210.57 [Enlarge Picture]

PTO Shield
- For A, B, G, LA. For EARLY 50, 60, 70, all with Live PTO & Powr-Trol. PTO Shield replaces #AA2297R. (Part No: R4403)
$54.00 [Enlarge Picture]

 
Paint
44 Minute DVD - How to Paint a Tractor
- This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$24.00 [Enlarge Picture]

Acrylic Hardener, 16oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 1 to 2 gallons of unreduced paint. (Part No: TP12P)$44.60

Acrylic Hardener, 8oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 2 quarts to 1 gallon of unreduced paint. (Part No: TP12HP)$27.96

Dakota Prep & Shine, Twin Pack
- Kit inlcudes (1) 16.oz bottle Dakota Prep with spray nozzle, (1) 16 oz. aerosol can Dakota Shine, (2) scrub pads (1) light, (1) aggresive. (Part No: DS2PK)
$38.48 [Enlarge Picture]

Dakota Prep, 1 Gallon
- Dakota Prep is a water-based and biodegradable cleaner that will remove wax buildup, grease, oxidation and grime from a variety of surfaces to renew paint to its previous luster. It is safe on many surfaces including painted surfaces, decals vinyl lettering, plastics, fiberglass, clear coat finishes, aluminum, glass and rubber. (Part No: DP1G)
$83.37 [Enlarge Picture]

Dakota Shine, 1 Gallon
- Dakota Shine is a unique and patented product that will restore the color, lustre and value to faded and oxidized surfaces like paint, decals, plastics, fiberglass, engine compartments and more. The ingredients are designed to penetrate the surface to rejuvinate the pigments to their original, lime-new appearance. No mixing required, quick dry time and no overspray lines to buff out. Used in conjunction with Dakota prep for best results. (Part No: DS1G)
$138.26 [Enlarge Picture]

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL)$42.53

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT)$24.74

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP)$42.52

Paint, Classic Green, 1 Gallon - For 2 cylinder JD, from TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP215GAL)$52.46

Paint, Classic Green, 1 Quart - For 2-cylinder JD, from TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP215QT)$29.86

Paint, Classic Green, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** For 2 cylinder JD From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP215SP)$42.52

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL)$71.91

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447QT)$29.91

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447SP)$51.68

Paint, Gloss Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550GAL)$42.24

Paint, Gloss Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550SP)$42.52

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700GAL)$42.24

Paint, Gray Primer, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700QT)$18.69

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700SP)$42.61

Paint, Green, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP210GAL)$50.00

Paint, Green, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP210QT)$29.92

Paint, Green, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP210SP)$51.84

Paint, Industrial Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP530GAL)$86.00

Paint, Industrial Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP530QT)$34.05

Paint, Industrial Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP530SP)$51.68

Paint, JD Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP190GAL)$42.53

Paint, JD Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP190QT)$24.74

Paint, JD Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.*** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP190SP)$42.52

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL)$45.50

Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225QT)$25.92

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225SP)$42.52

Paint, Soft Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200GAL)$53.93

Paint, Soft Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200SP)$42.52

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)$65.92

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)$27.81

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT)$95.63

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q)$21.00

Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$39.95 [Enlarge Picture]

Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$39.95 [Enlarge Picture]

 
Seats
Arm Rests - Pair
- Black Vinyl on Wood Cushion Only For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R1189)
$40.73 [Enlarge Picture]

Arm Rests - Pair
- Black Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R1190)
$71.69 [Enlarge Picture]

Arm Rests, Pair
- Yellow Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R1188)
$67.50 [Enlarge Picture]

Backrest, Black
- Superior, weatherproofed covers, material identical to cushions. Tee-nuts & cap screws included for easy installation. Holes are pre-set & drilled. Black. For models A, B, G, 50, 60, 70, 520, 620, 720, 730, 820, 830 series (Replaces AR21965R) (19-1 2x5-1 4). (Part No: JT300B)
$41.25 [Enlarge Picture]

Backrest, Yellow-MADE IN USA
- Superior, weatherproofed covers, material identical to cushions. Yellow. For models A, B, G, 50, 60, 70, 520, 620, 720, 730, 820, 830 series (Replaces AR21966R) (19-1 2x5-1 4). (Part No: JT300Y)
$41.25 [Enlarge Picture]

Pan Seat
- 19 inch wide with Nine Holes For A, B, D, G, H, L (Part No: 8N400)
$43.04 [Enlarge Picture]

Pan Seat, Universal
- 17 inch wide Gold zinc plated, 3-1 2" center to center on mounting holes, 1 2" by 1 2" center square. (Part No: B1865)
$37.24 [Enlarge Picture]

Seat Back
- Yellow, wood back. Also Available in Black (note "Black" in comments section of order form. 6 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. Picture shows seat bottom. Not included in price. Order P N R0172 if needed. (Part No: R0173)
$37.01 [Enlarge Picture]

Seat Back - Yellow, wood, 9 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R0993)$42.75

Seat Back
- Black, wood, 6 inches high. For models A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. (Part No: R0864)
$37.01 [Enlarge Picture]

Seat Belt
- Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22)
$32.37 [Enlarge Picture]

Seat Belt, Universal - Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT)$23.10

Seat Bottom
- Yellow, wood back. Also Available in Black (note "Black" in comments section of order form. 191 2" x 14 1 2". For D, G, R, 50, 60, 70 80, 520, 530, 620, 630, 720, 730, 820, 830. For seat back order part R0173. NOTE: If tractor has Float Ride, order p n 0994RTP bottom instead. Picture shows seat back. Not included in price. Order P N R0173 if needed. (Part No: R0172)
$46.03 [Enlarge Picture]

Seat Bottom
- Black, wood, 20 inches x 15 inches. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Part No: R0863)
$45.90 [Enlarge Picture]

Seat Bottom-MADE IN USA
- Durable, weatherproofed leatherette cover & solid one-piece foam filler assure complete customer satisfaction. Seat has a painted wood bottom and 4" foam cushion. Seat is 19.5" X 14.5". For models A, B, G, 50, 60, 70. (Part No: JT77Y)
$36.93 [Enlarge Picture]

Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056V)
$1294.75 [Enlarge Picture]

Seat, Air Suspension, Cloth, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056)
$1405.98 [Enlarge Picture]

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3 4" D). Fits several Commercial Turf Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)$98.77

Seat, Universal
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. (Part No: TS1050ATSP)
$101.46 [Enlarge Picture]

Seat, Universal
- BLUE Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. (Part No: TS1060ATSP)
$93.40 [Enlarge Picture]

Seat, Universal
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$93.40 [Enlarge Picture]

Seat, Universal - Seat assembly, Black leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BK)$106.23

Seat, Universal - Seat assembly, Blue leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BL)$109.62

Seat, Universal - Seat assembly, Yellow leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110YL)$106.23

Seat, Universal INDUSTRIAL with SLIDES
- Seat, universal, non-suspension style seat assembly with slide track for forward rear adjustment. Slotted base for adjusting slide tracks side to side 4" to 10-1 4". Black leatherette upholstery, vacuum formed and watertight for use in all weather conditions. (Part No: TS1036IND)
$70.15 [Enlarge Picture]

Tie-On Seat Cover
- Yellow & Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R2602)
$36.00 [Enlarge Picture]

Tie-On Seat Cover
- Yellow & White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Part No: R1014)
$36.00 [Enlarge Picture]

Tie-On Seat Cover
- Green & White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R1016)
$36.00 [Enlarge Picture]

Universal Seat
- Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015)
$172.58 [Enlarge Picture]

Universal Seat
- **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Part No: TS1040ATSP)
$97.65 [Enlarge Picture]

 
Sheet Metal / Body Parts
2 Hour DVD - The How To's of Sheetmetal Repair
- This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$24.00 [Enlarge Picture]

Battery Base
- Use with R0319 For A (From S#584000), G (From S#26000) (Part No: R4391)
$31.50 [Enlarge Picture]

Battery Base
- Use with R1521 & R1522 For B (From S# 201000), R, 80, 820, 830 with Pony Motor. Replaces OEM# AR1326R. (Part No: R3285)
$31.50 [Enlarge Picture]

Battery Box
- For model A with Serial Number 584000 and up, G with Serial Number 26000 and up. Also replaces AA4841R, AA4941R. (Part No: AA3954R)
$102.84 [Enlarge Picture]

Battery Box
- For B Serial Number 201000 and up, R With Pony Start. Replaces OEM# AB3593R, AB4101R (Part No: R1521)
$125.21 [Enlarge Picture]

Cab Foam Kit Spray Adhesive
- 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140)
$30.09 [Enlarge Picture]

DZUS Fasteners Kit
- Universal Set of 5 fasteners. 1 4 Turn Fasteners. For 13 32 inch holes, Head Diameter is 11 16, springs are 1 7 8 inch in length. Verify size before ordering. (Part No: DZUS2)
$16.00 [Enlarge Picture]

Fender
- Right hand or left hand, fits either side. Clamshell style fender does NOT come with bracket for the following models: A, B, G, 50, 520, 60, 620, 70, 720 Diesel, 630, 730 Diesel. Add $10 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Fender measures 27 3 4 tall and 33 inches wide at tallest and widest dimensions. (Part No: AA4655R)
$129.10 [Enlarge Picture]

Fender Bracket, Left - For A, B. Fender Bracket - Left. Add $5.00 per bracket to shipping total due to weight of bracket. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: A4050R)$67.06

Fender Bracket, Right - For A, B. Fender Bracket - Right. Add $5.00 per bracket to shipping total due to weight of bracket. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: A4049R)$71.25

Fender Hand Grip
- Used on many ag tractors, combines, implements and industrial tractor applications. (Part No: R20759)
$9.86 [Enlarge Picture]

Fender, LH
- For models G, (A styled SN# less than 650763), B, BN, BNH, BW, BWH, GH, GN, GW. Additional $50 shipping due to weight. This item must ship truck freight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: AA1583R)
$258.10 [Enlarge Picture]

Fender, RH
- For models G, (A styled SN# less than 650763), B, BN, BNH, BW, BWH, GH, GN, GW. Additional $50 shipping due to weight. This item must ship truck freight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: AA1582R)
$258.10 [Enlarge Picture]

Grill Screen - For one side For B, and H. These ARE PRE-FORMED. (Part No: B1420)$49.95

Hood Patch
- Weld-On Style patch is approx 7" x 7" and has a 4-1 4" hole. Used when converting to a thru-hood exhaust. Used on A, G, 60. (Part No: R2049)
$23.25 [Enlarge Picture]

Pilot Punch Set
- Set contains 12 sizes one of each 1 16, 3 32, 1 8, 5 32, 3 16, 7 32, 1 4, 5 16, 3 8, 7 16, and 1 2. (Part No: RPD112K)
$138.96 [Enlarge Picture]

SAFETY STEP KIT
- Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011)
$51.96 [Enlarge Picture]

Step Pad
- For models A, 60, B, 50, G, 520, 530, 620, 630, 70, 720, 730, 80, 820, 830, 2010, 1520, 1530, 2040, 2150, 2155, 2240, 2020, 2510, 2520, 2030, 2440, 3020, 2350, 2355, 2550, 2555, 2750, 2755, 2630, 2640, 4010, 3120, 4020, 2840, 4050, 4000, 4230, 4320, 4520, 4620, 4430, 4240, 4440, 4250, 4255, 5010, 5020, 6030, 8650, 920, 1120, 8850, 2130, 8450, 2120, 1830, 8020. (Part No: F3195R)
$31.23 [Enlarge Picture]

Step with Bracket
- Fits A, AO, AR, B, BO, BR, G, 50, 60, 70, 520, 530, 620, 630, 720, 730. Replaces OEM# A5234R or F3195R. (Part No: R2098)
$54.50 [Enlarge Picture]

Tool Box
- Universal Tool Box 15 1 2" X 4 3 4" X 4 1 4". Painted Red. (Part No: R2685)
$29.40 [Enlarge Picture]

Tool Box, Fender Mount
- This is an aftermarket toolbox designed to mount easily on the fender of most agricultural and industrial tractors. This is an aftermarket item, unlike any original toolboxes, and is meant for working tractors in need of a good toolbox. 18 inches long, 3-5 8" wide and 4-1 2" deep. (Part No: TB100FM)
$43.86 [Enlarge Picture]

Toolbox - Universal style of 11 inches long, 4 inches wide and 4.5 inches tall. Must drill mounting holes to match your tractor. (Part No: ABC308)$37.50

 
Steering
Pivot Bolster
- Replaces AA5765R. For models A, B, G (48-80 inch Tread), 50, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: R3060)
$526.55 [Enlarge Picture]

Spindle
- Spindle, LH RH, Dimension A-14.375 inch, B-1.5 inch, C-1.625 inch, D-1.312 inch. Fits A, AO, AR, B, GH, 50, 520, 530, 60, 620, 630, 70, 720 All with Factory Wide Fronts only. (Part No: AA5789R)
$211.93 [Enlarge Picture]

Steering Arm - Left
- For A, B, 50, 60, 70, all with round tube wide front axle. Steering Arm - Left. Replaces B1236. (Part No: AB4686R)
$168.90 [Enlarge Picture]

Steering Arm - Right
- For A, B, 50, 60, 70, all with round tube wide front axle. Steering Arm - Right. Replaces B1236. (Part No: AB4685R)
$170.95 [Enlarge Picture]

Steering Wheel
- 18" dia., 3 4"-7 8" shaft, 3 flat spokes. For models (A unstyled SN# 410000-476999), (AR unstyled SN# 250000-271999), (D SN# 109944-143800), (G SN# 1000-7099). (Part No: S.67512)
$40.56 [Enlarge Picture]

Steering Wheel
- (JD)18" dia., 3 4"-7 8" keyed stepped hub, 3 steel spokes. For models (A styled SN# 477000-498999), AR, (D SN# 143800-148871), (G SN# 7100-12999). (Part No: AA380RRS)
$44.06 [Enlarge Picture]

Steering Wheel
- 17-5 8" dia., 3 4"-7 8" keyed, 3 steel spokes. For models (A SN# 499000 and up), (B SN# 230044 and up), (G SN# 1300 and up), (D SN# 148872 and up), (R, 50, 60, 70, 80, with power steering), (520 SN# 5208099 and up), (620 SN# 7214899 and up), (720 SN# 721489 and up with power steering), (820 SN# 8203099 and up with power steering). nis 1 mar 07 jeff (Part No: S.67511)
$40.43 [Enlarge Picture]

Steering Wheel
- 16" dia., 3 4"-7 8" keyed, stepped hub, 3 flat spokes. For models (B unstyled SN# 1000-59999), BR, BO. (Part No: S.67522)
$40.43 [Enlarge Picture]

Steering Wheel
- For A, D, G. Steering Wheel. 18" Diameter, Round Spokes, 13 16" Stepped Hub. (Part No: AA380R-ROUND)
$59.25 [Enlarge Picture]

Steering Wheel
- For A, D, G. Steering Wheel. 18" Diameter, Flat Spokes, 13 16" Stepped Hub. R3220 (Part No: AA380R-FLAT)
$56.25 [Enlarge Picture]

Steering Wheel
- For A, B, D, G, R, 50, 60, 70, 80, 520, 620, 630, 720, 730, (820 Diesel (2 CYL) With Power Steering). Steering Wheel 17 5 8" Diameter, 13 16" Keyed Hub. 2447R (Part No: AA380R)
$54.95 [Enlarge Picture]

Steering Wheel Cap
- 2 legged deer, correct cap for all covered steering wheels on JD models from 1968-2000. (Part No: AL155227)
$36.75 [Enlarge Picture]

Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$10.00 [Enlarge Picture]

Steering Wheel Spinner, Black
- Comes with mounting hardware. (Part No: R3276)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Yellow
- Comes with mounting hardware. (Part No: R3280)
$11.70 [Enlarge Picture]

 
Tools
*Combination Wrench Set
- 22 pieces SAE Metric. Polished chrome vanadium steel. Metric: 9, thru 19 mm. SAE: 1 4 thru 7 8. Comes with a durable plastic rack for handy storage. LIFE TIME UNLIMITED WARRANTY. (Part No: W1069)
$29.99 [Enlarge Picture]

Adjustable Cylinder Hone Replacement Stones, Coarse
- Set of three 4" coarse textured stones with cotter pins for 900542 cylinder hone. (Part No: 900563)
$17.48 [Enlarge Picture]

Adjustable Cylinder Hone Replacement Stones, Fine
- Set of three 4" fine textured stones with cotter pins for 900542 cylinder hone. (Part No: 900556)
$17.48 [Enlarge Picture]

Adjustable Cylinder Hone Replacement Stones, Medium
- Set of three 4" medium textured stones with cotter pins for 900542 cylinder hone. (Part No: 900549)
$17.48 [Enlarge Picture]

Adjustable Engine Cylinder Hone
- Resurfaces cylinder walls so new rings will seat and eliminate minor cylinder wall imperfections. 2" to 7" diameter range with adjustable tension settings to control the cutting action. Features flexible shaft that will fit any variable speed drill and replaceable 4" stones. Medium texture stones included. Stone replacement part numbers are (900556)Fine textured stones, (900549) medium textured stones and (900563) coarse stones. (Part No: 900542)
$38.37 [Enlarge Picture]

Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)$19.95

Chain Binder
- 1 4" chain binder, 2600 pound load limit. (Part No: LL104)
$36.74 [Enlarge Picture]

Chain Binder
- 3 8" chain binder, 5400 pound load limt. Use with either 5 16" or 3 8" chain. (Part No: LL105)
$41.70 [Enlarge Picture]

Chain Binder
- 1 2" chain binder, 9200 pound load limit. Use with either 3 8" or 1 2" chain. (Part No: LL106)
$78.11 [Enlarge Picture]

Chain Binder
- 1 2" chain binder, 9200 pound load limit. Use with either 3 8" or 1 2" chain. (Part No: LL106)
$78.11 [Enlarge Picture]

Combination Wrench Set
- 11 pieces. Sae sizes 1 4 to 7 8. Chrome vanadium steel construction. Handy storage rack. LIFETIME UNCONDITIONAL WARRANTY. (Part No: W1061)
$21.00 [Enlarge Picture]

Compression Tester
- Checks cylinder compression up to 300 PSI. Fits 14 and 18mm spark plug threads. Equipped with air-hold valve and gauge reset button. 11 inch flexible rubber hose. Complete with instructions. (Part No: W80579)
$32.48 [Enlarge Picture]

Cotter Pin Assortment
- 150 Pieces. Contains sizes of 1 8x2, 5 32x2 1 2, 3 16 x 3, 1 4 x 2, 1 4 x 3, 5 16 x 2 1 2. All in a convenient re-sealable plastic case. (Part No: W5206)
$12.48 [Enlarge Picture]

Cotter Pin Assortment, Small
- 560 piece assortment of 1 16" x 1", 3 32" x 1", 3 32" x 1-1 2", 1 8" x 1-1 4", 1 8" x 2", 5 32" x 2-1 2" all in convenient re-sealable plastic case. (Part No: W5205)
$9.40 [Enlarge Picture]

Diesel Compression Test Kit
- Complete kit with case. 0 to 1000 PSI Gauge (0-700kPA). Includes 9 adapters for popular Domestic, Asian and European vehicles. Will fit the following thread sizes: 24 x 2.00, 12 x 1.25, 10 x 1.25, 10 x 1. Tests compresssion through both flow plug and injector holes. Gauge accuracy + - 2 percent. (Part No: W89731)
$59.95 [Enlarge Picture]

Digital Calipers, Stainless
- High quality hardened stainless steel digital caliper. calculates measurements up to 6" with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$36.11 [Enlarge Picture]

GREASE GUN
- GREASE GUN-Pistol handle grease gun uses standard 11" grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)
$28.88 [Enlarge Picture]

GREASE GUN
- Spring fed 11" barrel grease gun. Uses standard 11" grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080)
$26.74 [Enlarge Picture]

GREASE GUN
- HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142)
$35.16 [Enlarge Picture]

GREASE GUN CLAMP
- Clamp holds all 2-1 4" diameter barrel hand guns. Bolts or screws anywhere thru hole in bracket base. (Part No: GC102)
$12.44 [Enlarge Picture]

GREASE GUN POWERLUBER 14.4V BATTERY
- Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$109.95 [Enlarge Picture]

GREASE GUN POWERLUBER 14.4V with CASE 1 BAT
- Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)
$270.05 [Enlarge Picture]

GREASE GUN POWERLUBER 14.4V with CASE 2 BAT
- Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)
$376.87 [Enlarge Picture]

GREASE HOSE 12 INCH
- 12 flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G115)
$10.86 [Enlarge Picture]

GREASE HOSE 18 INCH
- 18" flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G118)
$9.90 [Enlarge Picture]

Hair Pin Assortment
- 150 pieces. Includes 6 different sizes from 1 3 16 Length to 2 15 16. All in a convenient re-sealable plastic case. (Part No: W5210)
$8.32 [Enlarge Picture]

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S.58474)$249.90

Hobby Tool Kit
- With Carrying Case. Complete Knife kit with two handle styles. Also comes with 3 inch caliper, tweezers, precision screwdriver and 28 blades. (Part No: W1709)
$23.74 [Enlarge Picture]

Hose Clamps Assortment
- 26 pieces. Includes sizes of: 5 8, 7 8, 1, 1 1 16, 1 1 4, 1 1 2 inch. All in a convenient re-sealable plastic case. (Part No: W5348)
$8.06 [Enlarge Picture]

MULTI TESTER
- Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420)
$24.76 [Enlarge Picture]

Main Seal Installer/Remover
- Removes and installs upper rear main seals on many engines without removing engine or crankshaft. Contains corkscrew removal tool, T-handle and wire with clip for pulling new seals into place, 2 extra clips. (Part No: W84019)
$7.10 [Enlarge Picture]

O-Ring Assortment
- 407 pieces. Includes 32 sizes from 1 4 O.D to 2 1 4 O.D. All in a convenient re-sealable plastic case. (Part No: W5202)
$16.36 [Enlarge Picture]

Piston Ring Compressor
- Use to install pistons. Positive compression and adjustable friction brake. Includes instructions. Band diameter from 3.5 to 7 inches (88 to 177mm). (Part No: W80573)
$18.12 [Enlarge Picture]

Piston Ring Groove Cleaner
- Cleans carbon and deposits from ring grooves. Includes two 5 cutter wheels for a total of 10 groove cleaning sizes: SAE: 1 16, 5 64, 3 32, 3 16 and 1 4. Metric: 1.5, 1.75 and 2 mm. (Part No: W80576)
$18.26 [Enlarge Picture]

Rotary Tool Kit
- 80 Pieces. Hand held rotary tool. Turns at 1600 rpm. Contains cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone and drill bits. Great for cutting, grinding, polishing, sharpening and drilling. (Part No: W50083)
$19.00 [Enlarge Picture]

Rubber Grommet Assortment
- 125 pieces in 18 various sizes from 1 8 x 9 32 to 1 inch. All in a convenient re-sealable plastic case. (Part No: W5214)
$9.38 [Enlarge Picture]

Screwdriver Set
- 30 pieces. Contains 7 screwdrivers 1 4 to 6 inch, a magnetic bit driver, 6 precision screwdrivers, 14 power bits. All contained in a Plastic Rack (Part No: W1718)
$23.08 [Enlarge Picture]

Spring Assortment
- 200 pieces. Includes compression type sizes from 9 32 x 1 2 to 7 32 x 1 1 2, extension type from 13 64 x 13 16 to 11 32 x 1 7 16. (Part No: W5200)
$7.98 [Enlarge Picture]

Step Drill Bit Set
- 3 Pieces. Titanium Nitride Coated high speed steel. 1 4 inch shank. Drills holes up to 1 inch. For use with metal, wood or plastic. Starts on contact, no center punch required. Automatically deburrs holes as you drill. (Part No: W9003)
$17.20 [Enlarge Picture]

T-Handle Hex Key Set - 10 Pieces (SAE). High quality carbon steel shafts. Black oxide finish resists corrosion. PVC T-handle grips for added torque and comfort. Sizes: 3 32, 7 64, 1 8, 9 64, 5 32, 3 16, 7 32, 1 4, 5 16 and 3 8 inch. Comes with hand storage rack (mountable). (Part No: W80274)$19.94

Torque Wrench - Micrometer 1 2 inch drive adjustable torque wrench. Chrome plated alloy steel. Reversible ratchet head. SAE and Metric Scale. 10 to 150 lb torque range. 1 lb graduations. (Part No: M200DB)$34.40

Valve Spring Tool
- Compresses springs without removing head. Adjustable cam handle keeps tool correctly adjusted for entire job. Remove lever and turn with socket in confined areas. (Part No: W80567)
$31.24 [Enlarge Picture]

WIRE STRIPPER 4-WAY
- 4-way wire stripper crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223)
$9.88 [Enlarge Picture]

Winch Remote, Wireless
- Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003)
$37.50 [Enlarge Picture]

Winch Set, 2500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0002)
$129.95 [Enlarge Picture]

Winch Set, 2500 Lb
- Universal 12 volt with Hand held remote. (Part No: 3013-0004)
$119.95 [Enlarge Picture]

Winch Set, 3500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0001)
$149.95 [Enlarge Picture]

Winch Set, 3500 Lb
- Universal 12 volt with Hand held remote. (Part No: 3013-0005)
$129.95 [Enlarge Picture]

Wire Terminal Assortment
- 160 piece set. Contains 19 popular sizes and types of wire terminals. All in a convenient re-sealable plastic case. (Part No: W5213)
$15.48 [Enlarge Picture]

Woodruff Key Assortment
- 80 pieces. Includes 10 each of: 3x5x13 mm, 3x6.5x16 mm, 4x5x13 mm, 4x6.5x16 mm, 4x7.5x19 mm, 5x7.5x19 mm, 5x9x22 mm, 6x9x22 mm. All in a convenient re-sealable plastic case. (Part No: W5341)
$11.26 [Enlarge Picture]

 
Wheels
Bearing Cone
- For models 50, 60, 70, A, BW, D, G. (Part No: 2785-TIM)
$24.45 [Enlarge Picture]

Bearing Cone
- For models 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: 3383)
$43.36 [Enlarge Picture]

Bearing Cone
- Outer bearing cone. For model applications: A series excluding AN, BW, D, G series~ 50 adjustable to serial number 5019164~ 60 series to serial number 6034693~ 70 series excluding standard to serial number 7011652. For 50, 60, 70, A, BW, D, G (Part No: TP-JD7216)
$24.45 [Enlarge Picture]

Bearing Cone
- Inner bearing cone. For model applications: A series excluding AN, BW, D, G series~ 50~ 60~ 70. For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G (Part No: TP-JD7224)
$42.34 [Enlarge Picture]

Bearing Cup
- For models 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: 3320-TIM)
$21.80 [Enlarge Picture]

Bearing Cup - Outer bearing cup. For models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 50, B, BO, BR (Part No: TP-JD7259)$8.34

Bearing Cup
- Outer bearing cup. For model applications: A series excluding AN, BW, D, G series~ 50, 60, 70. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 4520, 4620, 4630, 4640, 4840, 50, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, A, AN, ANH, B, BN, BNH, BO, BR, BW, D, G (Part No: TP-JD7266)
$8.80 [Enlarge Picture]

Bearing Cup, Inner
- For models A series excluding AN, BW, D, G series~ 50~ 60~ 70, 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: TP-JD7270)
$21.80 [Enlarge Picture]

Clamp Lock Nut
- 3 4-16 thread, fits front wheel on B, M, MT, 40, 420S, 420T, 1010 & 2010. For 1010, 2010, 40, 420S, 420T, B, M, MT (Part No: LN10-2)
$20.44 [Enlarge Picture]

Clamp Lock Nut
- 1-14 thread, fits front wheel on A, D, G, R, 50, 60, 70, 3010 & 4010. For 3010, 4010, 50, 60, 70, A, D, G, R (Part No: LN10-6)
$19.94 [Enlarge Picture]

Front Tractor Tires
- We are now offering Front Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. (Part No: FRONT_TIRES)
$0.00 [Enlarge Picture]

Front Wheel Bearing Kit - (JD)Front Wheel Bearing Kit. Kit Contains one each: JD7270(Cup), JD7224(Cone), JD7266(Cup), JD7216(Cone), D636R(Seal). Retainer sold separately as p n D635R. For A series excluding AN, BW, D, G series~ 50 adjustable to serial number 5019164~ 60 series to serial number 6034693~ 70 series excluding standard to serial number 7011652. For 50, 60, 70, A, BW, D, G. Repairs one wheel. (Part No: FW109S)$84.99

Rear Rim Carriage Head Bolt and Nut
- 2.5 length, 5 8 diameter FF Carriage Head Bolt with 1 2 inchnuts. PRICED EACH. **Minimum order is quantity of 6. (Part No: HB250)
$3.25 [Enlarge Picture]

Rear Tractor Tires
- We are now offering Rear Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. (Part No: REAR_TIRES)
$0.00 [Enlarge Picture]

TIRE GAUGE
- Gauge has special oiling & pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350)
$15.48 [Enlarge Picture]

TIRE GAUGE DIAL
- Precision bourdon tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG)
$17.16 [Enlarge Picture]

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Breass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599)$42.82

Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$39.95 [Enlarge Picture]

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q)$21.00

Tire Tube 24 Inch - For 7.5, 8.3, 9.5 x 24 inch tires. (Part No: WHS060)$37.60

Tire Tube 24 Inch - For 11.2, 12.4 x 24 inch tires. (Part No: WHS059)$51.30

Tire Tube 28 Inch - For 11.2, 12.4 x 28 Inch Tires. (Part No: WHS058)$56.55

Tire Tube 28 Inch - For 13.6, 14.9 x 28 Inch Tires. (Part No: WHS061)$79.45

Tire Tube 32 Inch - For 9.5 x 32 Inch Tires. (Part No: WHS062)$56.95

Tire Tube 34 and 36 Inch - For 11.2 or 12.4 x 34 Inch Tires and for 11.2 or 12.4 x 36 Inch Tires. (Part No: WHS063)$59.90

Tire Tube 38 Inch - For 11.2, 12.4 x 38 Inch Tires. (Part No: WHS064)$65.25

Tire Valve Fluid Adapter
- For ballast. (Part No: S.61167)
$27.90 [Enlarge Picture]

Tire and Tube - 400x12 3 Rib Tire with tube. (Part No: 400x12-3)$74.22




PayPal


Customer Service
Monday - Friday
10:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure

  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2014 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.