(800) 853-2651   Cart  View Cart    
Low Prices, Fast Shipping

 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

IHC Farmall Model H Parts
[ Show All Pictures ]
 
Brakes
Brake Actuating Spring - Used with disc brakes. For models H, HV, Super C, Super H, O4, OS4, W4, 200, 230, 240, Farmall 300, 330, 340, Farmall 350, 404, 460, 504, 544, 606, 2404, 2504, 2544, 2606, 203, 205, 315, 615. (Part No: A30910)$10.00

Brake Disc - Bonded Lined disc measures 5 5 8 x 3 3 8 inches, 10 spline. For Tractors: H SN# 391358 & Up, Super H, Super W4; 300, 350. Replaces 356071R91, 368183R91. (Part No: 1975457C3)$17.96 [Show Picture]

Brake Pedal Return Spring - Used with band brakes. For models (2544, 544 clutch pedal return), H, HV, M, MD, MDV, MV. Replaces IHS687. (Part No: 48599DA)$7.95

Brake Pedal Shaft - For models (H, HV SN# up to 391357 with brake band). (Part No: 50170DA)$47.84 [Show Picture]

 
Clutch
Bearing - Pilot - New Pilot Bearing. 25mm (.9843") I.D., 52 mm (2.0472") O.D. with seals on both sides. For tractors: 400, 450, 500, 560, 600, 660, H, HV, M, M500, MD, MDV, MV, Super H, Super M, Super MD, Super MTA, Super W4, Super W6, W4, W6, WD6. (Part No: ST544)$3.86 [Show Picture]

Clutch Kit - For models H, HV to SN# 391357. This is a rockford style clutch. Picture is incorrect.... this comes with a woven disc, not a 4 button disc. Kit contains remanfactured pressured plate(10" and 6 springs), remanufactured disc(10" with 10 spline and 1-1 4" hub), new release bearing, and new pilot bearing. Refundable $25 core charge will be added to your order. (Part No: 52900K)$309.78 [Show Picture]

Clutch Release Bearing, Greaseable - For models A, Super A, B, C, Super C, H, Super H, 100, 130, 140, 200, 230, 240, 404, 2404. This bearing is 3.5625" O.D., 2.0625" I.D. (Part No: 361292R91)$31.71 [Show Picture]

Pressure Plate - 10.5" Rockford style. Fits H SN# 391358>, HV SN# 391358>, Super H SN# 391358>. (Part No: 358555R92)$213.30 [Show Picture]

Pressure Plate - 10" Rockford style. Fits Models: H, HV, Super H, Super W4, W4. (Part No: 52900D)$185.73 [Show Picture]

Pressure Plate, 9 Inch - Rockford Style Clutch Pressure Plate. Fits Models: H, HV, Super H, Super W4, W4. (Part No: 70228926)$138.94 [Show Picture]

Transmission Disc - 10.5" Rockford style.Fits Models: H SN# 391358>, HV SN# 391358>, Super H SN# 391358>. (Part No: 358556R92)$52.57

Transmission Disc - 10" Rockford style. 10 spline 1.25" Fits Models: H, HV, Super H, Super W4, W4. (Part No: 64772DA)$68.88 [Show Picture]

 
Cooling System
Fan - 6 Blade For models H, HV. (Part No: A184904)$118.25 [Show Picture]

Fan Belt - Fan belt fits engines: C152, C164, C169, C175. For models H, 4, Super H, Super W4, 300, 350. Belt is 5 8" wide and 38-3 8" long. (Part No: 48032DA)$17.66 [Show Picture]

Header, Water Cover - Water jacket cover for Models: 300, 350, H, Super H, Super HV. (Part No: 48461DA)$26.87 [Show Picture]

Radiator - For models H & Super H, HV, Super HV, O4, OS4, W4, Super W4. Replaces OEM 352628R92. (Part No: 352628R92)$398.46 [Show Picture]

Radiator Cap With Lever - Pressure cap with lever. For C, H, M, MD, O6, ODS6, Super C, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9, Super A, W4, W6, W9, WD9 (Part No: 67448DDWL)$14.95 [Show Picture]

Radiator Hold Down Spring - Also used for fuel tank hold down spring. Total 5 used per tractor. For Models H, HV, O4, O6, SUPER H, ( As radiator hold down spring only - 2 used: SUPER M, SUPER MTA, W4, W6, WD6, 400, 424, 450, 2424. (Part No: 48826D)$8.11

Radiator Hose Kit - Radiator hose kit for tractors: H, 4, Super W4l 300 & 350 (not farmall). Hoses-(1) 1-1 4 I.D. x 2-1 4L, (1)1-3 4 I.D. x 3-1 2L, (2) 1-1 2 I.D. x 2 (Part No: RHKH300)$12.62 [Show Picture]

Radiator Pipe, Lower - Lower water pipe. For models H, HV, I4, O4, OS4, Super H, Super W4, W4. Replaces 48828D, IHS684. (Part No: 353852R1)$29.95 [Show Picture]

Thermostat - With gasket. 160 Degree long neck thermostat. For H, HV, M, MD, MDV, MTA, MV, O4, O6, Super H, Super HV, Super M, Super MD, Super W6, W4, W6, W9, 300, 350 gas, 400, 450, 560 Diesel, 656 Diesel, 660 Diesel, 706 Diesel. (Part No: R1852)$33.95 [Show Picture]

Water Block Drain Plug, Winged - Plug 3 8" pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas Dsl), serviceable for Cub, Cub LoBoy. (Part No: 45314DC)$11.18 [Show Picture]

Water Pump - For H, Super H. Water Pump. (Part No: 54148DA)$194.68 [Show Picture]

Water Pump Bearing - Ball bearing for water pumps used on tractors: H, Super H, 4, Super W4, 300, 350. 2 used per pump, replaces ST225. For 300, 350, 4, H, Super H, Super W4 (Part No: ST225B)$16.90 [Show Picture]

Water Pump Seal - For model s:300, 350, H, HV. (Part No: 51492DA)$16.58 [Show Picture]

Water Pump, Impeller - For models 300, 350, H, Super H. This is impeller Only, DOES NOT include shaft or thrust washer. (Part No: 9165DX)$21.86 [Show Picture]

 
Decals and Emblems
Hood Emblem - Hood Emblem For H, HV, M, MV, MD, MDV. Bright Metal 'Farmall' logo. (Part No: 49404D)$19.00 [Show Picture]

Tool Box Decal - For models H, M, MD, Super H, Super M, Super MD, Super MTA. (Part No: R0678)$7.76 [Show Picture]

 
Drive Train
Constant Mesh Gear - For models H, HV, Super H, Super HV, W4. (Part No: 357459R2)$115.56 [Show Picture]

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Part No: 53717DA)$11.20 [Show Picture]

Seal, Rear Axle - One 2-1 2"dia. Seal. For models 300, 330, 340, 350, 460, H, HV, Super H, Super HV. (Part No: 377786R1)$14.44 [Show Picture]

Transmission Drive Shaft - For models H & HV to SN# 391357, 04, 0S4, W4. 18 & 35 teeth. (Part No: 52945DE)$167.78 [Show Picture]

 
Electrical System
(Starters, Generators, Coils, Wiring, etc.)
Alternator Bracket Kit - For models H, Super H. (Part No: ALTBRK-H)$52.15 [Show Picture]

Battery Cable - From Battery to starter, 48" long. For models H, W4. (Part No: 26A148)$22.90

Coil, Original, 12 Volt - OEM style coil. For models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353875R91)$54.95 [Show Picture]

Coil, Original, 6 Volt - OEM style coil. For models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353874R91)$54.95 [Show Picture]

Condenser - Services IH distributors 1951-1962 also services J4 magnetos. For models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Part No: 353903R1)$6.37 [Show Picture]

Condenser, Magneto - Condenser for IH Models using H4 F4, J4 Magneto (replaces 373892R91). For models 100, 130, 200, 300, 350, W4, W6, A, B, BN, C, H, M. (Part No: 71455C1)$9.98 [Show Picture]

Distributor - Used when changing from magneto to distributor, coil and bracket included. For models Cub, A, B, C, H, M. Refundable $100 MAGNETO core charge will be added to your order. Upon return of an original magneto for the same tractor, your core charge will be refunded. For replacement parts, uses Tune Kit ATK5BIR and Cap 351693R92. (Part No: R1197391)$364.00 [Show Picture]

Distributor Cap - 4 Cylinder Clip Type Cap For Delco Distributors: replaces 811735 Delco and 1750411M1. For models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Part No: 1750411M91)$9.60 [Show Picture]

Distributor Cap - 2-3 16" high, fits 4 cyl. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Part No: 351693R92)$7.26 [Show Picture]

Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Part No: 353934R11)$28.95 [Show Picture]

Distributor Dust Cover - Fits early Delco distributor with clip held cap. For models (A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super HV, M, MV, Super MV, MTA all with Delco vertical conversion distributor 1111411). (Part No: 1900119)$9.90 [Show Picture]

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Part No: 353900R11)$16.00 [Show Picture]

Distributor with Electronic Ignition - New and complete distributor FOR USE WITH 6 VOLT POSITIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. (Part No: 107304C91-6V)$449.97 [Show Picture]

Distributor with Electronic Ignition - 12V - New and complete distributor FOR USE WITH 12 VOLT NEGATIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Note: This distributor has a maximum advance of 21 degrees. Some applications require an advance up to 40 degrees. Verify with your service manual this distributor will work for your application. (Part No: 107304C91-12V)$449.97 [Show Picture]

Distributor, New - Original IHC design. For models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. (Part No: R6332)$294.00 [Show Picture]

Distributor, New - New and complete distributor. For Models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. (Part No: 107304C91)$220.00 [Show Picture]

Distributor, Rebuilt - Complete Remanufactured distributor for tractors with IH distributors. For models Cub, A, B, C, Super A, H, M, Super H, W6, W9, Super W6, 100, 130, 200, 240, 300, 400, 404, 450, 504. A refundable $100.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1197003)$215.00 [Show Picture]

Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Part No: 1442P6)$89.48 [Show Picture]

Electronic Ignition Conversion Kit - Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve ground system only. (FOR NEGATIVE GROUND Order Part #1442)Use with distributor #357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Part No: 1442P12)$89.48 [Show Picture]

Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Part No: 1442)$81.11 [Show Picture]

Electronic Ignition Conversion Kit - 12v Negative Ground - For Tractor Models: A, AV, Super A & AV, B, BN, C Super C, H, HV, Super H & HV, M, MV, Super M & MTA, Super MD & MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system only. Distributors with clip type cap. (Part No: 1142)$81.11 [Show Picture]

Electronic Ignition Conversion Kit - 12v Positive Ground - For Tractor Models: A, AV, Super A & AV, B, BN, C Super C, H, HV, Super H & HV, M, MV, Super M & MTA, Super MD & MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system only. (Part No: 1142P12)$89.48 [Show Picture]

Electronic Ignition Conversion Kit, 6v Positive Ground - For Tractor Models: A, AV, Super A & AV, B, BN, C Super C, H, HV, Super H & HV, M, MV, Super M & MTA, Super MD & MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368 with clip type cap. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 6 volt positive ground system only. (Part No: 1142P6)$89.48 [Show Picture]

Fuse Housing - Reproduction of original Fuse Housing, with fuse and lead wires with cloth covered laquered wire and cotton braid. For models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. (Part No: 354232R91)$26.00

Generator, 6 Volt, Remanufactured - 6 volt, 25 amp, Delco Fits Models: 200 1.75" SHAFT, 400 501-13673 GAS, A, A1 with BATTERY, AV with BATTERY, AV1 with BATTERY, B, BN, C, (Cub prior to SN 221292 and Cub Lo-Boy prior to SN 16397 - both with 1.75" long shaft) H, HV, M, MV, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MTA GAS, TD6 1955-56, TD9 1955-56, W4, W6, W6TA. Refundable $25.00 core charge will be added to your order after the order has been received and will not show on your reciept. (Part No: 356936R91)$233.37 [Show Picture]

Ignition Switch - For the following Models using a magneto: Cub, Cub Lo-Boy, A, B, C, H, M, 100, 130, 140, 200, 230, 300, 350, 400. NOT like original. (Part No: 54207DB)$9.90 [Show Picture]

Ignition Switch - 2 terminal. For the following Models using a distributor: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, (140 6 volt), 200, 230. NOT like original. (Part No: 62801DC)$10.44

Ignition Tune Up Kit - For IH Distributor-NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Plugs, Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: IHTK1)$29.56 [Show Picture]

Ignition Tune Up Kit, Basic - Fits 4 cylinder gas engines with battery ignition 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Part No: ATK5BIR)$21.28 [Show Picture]

Ignition Tune Up Kit, Basic, Delco Clip Held Cap - Ignition kit For Delco ONLY distributor with CLIP held cap. Contains points, condenser, rotor, and proper point gap gauge. For models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Part No: ATK1DCR)$11.98 [Show Picture]

Ignition Tune Up Kit, Comprehensive - For models A, AV, B, BN, C, Super A, Super AV, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, H, HV, 4, 444, Super H, Super HV, Super W4, 300, 350, M, 6, Super M, Super MTA, Super W6, W6-TA, 400, 450. All with IH Distributor, not for Delco Distributor. Kit contains spark plugs, points, condenser, rotor, gap gauge, (IHTK1) distributor cap (351693R92) and set of universal plug wires (CPN12259). NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: IHTUNEKIT)$46.31 [Show Picture]

Ignition Tune Up Kit, Delco Clip Held Cap - FOR DELCO DISTRIBUTOR WITH CLIP-HELD CAP. 4 Cylinder kit includes spark plugs, points, condenser, and rotor. For models with clip held Type Delco Distributor Caps. For models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Part No: MFITK10)$23.56 [Show Picture]

Magneto Coil Cover - For models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 47449DAY)$27.29 [Show Picture]

Magneto Distributor Cap, H4 Magneto - For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 47413DYC)$19.64 [Show Picture]

Magneto Point Set - For J-4 Magneto only. (Part No: 353172R1)$4.98 [Show Picture]

Magneto Point Set, F-4 - For models F-4 type magneto only. Used on A, B, C, H, HV, M, MC, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 340, 350, 400, 450. (Part No: 353173R1)$20.29 [Show Picture]

Magneto Points - Point Set Fits J4 and H4 Magneto(can work with F4 magneto with modify) (Part No: 353171R91)$10.00 [Show Picture]

Magneto Rebuild Kit, H4 - Magneto Rebuild Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. Includes condenser, winding coil, points, rotor, cap, coil cover, gear and gasket. (Part No: H4-KIT)$149.91 [Show Picture]

Magneto Tune-up Kit For H4 - Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Part No: 21A10R)$21.16 [Show Picture]

Magneto Winding for F4 or H4 - Coil Winding for F4 magneto and H4 magneto; molded, hi-output. 2" wide, 3 4" hole, 2-3 16" O.D.. Can replace 47439DA. Magneto Winding for F4 and H4 Magnetos used on: F12, F14, F20, F30, H, MD, WD6, W9, WD9. (Note: This will NOT work for E4A magneto. (Part No: RW104)$66.07 [Show Picture]

Magneto or Distributor Drive Shaft - Verify part number before ordering. For models (300, 350, 400, 450 all not used with hydra touch system), (H, HV SN# 268224 and up), (M, MD, MDV, MV all SN# 148867 and up), Super H, Super HV, (Super M, Super MTA not used with hydra lift, attached with engine driven pump). (Part No: 352079R1)$90.17 [Show Picture]

Magneto, Rebuilt - H-4 magneto with CLOCKWISE Rotation (as viewed from Drivers seat). For models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Right hand flange mount. (Part No: R1196807)$493.41 [Show Picture]

Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: 353896R1)$4.20 [Show Picture]

Spark Plug - For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. Price shown is for EACH, shipped in lots of 4. Enter '4' in QTY box. Replaces OEM 360942R1. (Part No: AL386)$3.24 [Show Picture]

Spark Plug Wire Set, Custom - Delco Distributor Only. For models Cub, A, Super A, B, BN, C, Super C, H, Super H, M, MTA, 300, 350, 400, 450. (Part No: S.67475)$19.98 [Show Picture]

Starter Drive - Starter drive. Fits A, B, C, H, M, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450 Replaces OEM# 1107021, 1107412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 1107408, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. (Part No: 565549)$36.52

Starter Switch, Manual - For H, M, Super M, MD, O4, OS4, W4, O6, OS6, ODS6, W6, WD6. Replaces delco 405C, IH64931H, 356913R1, 1996487. Base mount with 7 8 Hole. (Part No: 9N11450A)$13.62 [Show Picture]

Starter Switch, Manual - Starter switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A&AV, Super C, H, HV, Super H&HV, Super M&MV, Super W6&WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 Mounting holes, 190 I.D. With 1-3 8 centers. Replaces Delco 1918405, 1932131, and OEM IH 593292C1. (Part No: 1925781)$10.08 [Show Picture]

Starter, 6 Volt, 2 Bolt Mount - 2-Bolt mounted starter for C163 gas engine on H (to SN# 19233), HV, for 248 gas on M (to SN# 28174), 152 Gas on OS4 (1940-51), C248 Gas on O-6 (1940-51), C264 gas on O-9 (1940-51), C163 Gas on Super W-4 (1952-54), C264 Gas on Super W-6 6TA (1946-51), C335 Gas on Super W-9 (1946-51), C163 Gas on I4 (1940-51). Can be used on a 12 Volt system and recommend installing heavy duty starter drive part #SDR5022. (Part No: 1107448)$165.65 [Show Picture]

Starting Switch Lever - Starting Switch Lever - Lever, pull rod starting switch. For 100, 130, 140, 200, 230, C, Cub, Cub Lo-Boy, H, HV, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A, WD6. (Part No: 1918322)$11.14 [Show Picture]

Switch, Ignition - For Distributor Ignitions, 2 terminal switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230 (Part No: R2720)$39.90 [Show Picture]

Switch, Ignition - For Magneto Ignitions. Switch has only 1 terminal (Picture shows 2). For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub (Part No: R2721)$39.90 [Show Picture]

Terminal Clip - Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Part No: 79407H)$15.68 [Show Picture]

Voltage Regulator, 6 Volt, Positive Ground - REPLACES 121578C1, Delco 1118308, 1118780 & 1119575. Fits models: 100, 130, 140, 330, 340, Cub, Cub Lo-Boy, Super A, Super C, H, M, MTA. (Part No: GDR6003)$24.95 [Show Picture]

Wire Harness - WIRE HARNESS For H, HV, M, MD, MDV, MTA, MV, Super M (Part No: 52973DA)$39.15 [Show Picture]

Wire Harness, Regulator Cable - For models H, HV, M, MV, Super M, Super MTA. (Part No: 354297R91)$30.17 [Show Picture]

Wiring Harness, Main - For models H SN# 501 to 340953 (with regulator on generator), M SN# 501 to 187002. (Part No: 56281D)$83.70 [Show Picture]

Wiring Harness, Rear Light - For model H, HV. Rear light switch wiring harness. Restoration Quality. (Part No: 358311R91)$49.35 [Show Picture]

 
Engine Bearings
Cam Bearing Set - Camshaft bearing kit, 3 bearings. Induvidual bearings not available. For C152 CID 4 cylinder engine in tractors H & HV O4, OS4, W4. For 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4 (Part No: CBK-H152)$40.49 [Show Picture]

Main Bearing Set - .010", For models 300, 350, (H SN# 391358 and up), (HV SN# 391358 and up), (O4 SN# 33340 and up), (OS4 SN# 33340 and up), Super H, Super HV, Super W4, (W4 SN# 33340). (Part No: MBK164-010)$91.76 [Show Picture]

Main Bearing Set - Main Bearing Set (Std) For H & HV to SN# 391357, and for 04, 0S4 & W4 to SN# 33339. If other than Std. specify size of;(.010 or .020)in "comments" when ordering. (Part No: MBK152)$95.97

Main Bearing Set - Main Bearing Set (Std.) H & HV - (both with SN# 391358 & up). Also C152 GAS on O4, OS4 & W4-(all with SN# 33340 & up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. (Part No: MBK164)$91.76 [Show Picture]

Rod Bearing Set - .020". For models 300, 350, (H SN# 391358 and up), (HV SN# 391358), (O4 SN# 33340 and up), (OS4 SN# 33340 and up), Super H, Super HV, Super W4, (W4 SN# 33340 and up). (Part No: CRK164-020)$53.91 [Show Picture]

Rod Bearing Set - Rod Bearing Set (Std.) For H & HV to SN# 391357, and for 04, 0S4 & W4 to SN# 33339. If other than Std., specify size in comments (.002, .010 &.020) (Part No: CRK152)$69.55

Rod Bearing Set - Rod Bearing Set(Std.) If other than Std. specify size of;(.010 or .020)in "comments" when ordering. Fits the following: C152 GAS engine on H & HV - (both with SN# 391358 & up). Also C152 GAS on O4, OS4 & W4-(all with SN# 33340 & up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. (Part No: CRK164)$51.38

 
Engine Gaskets
Complete Gasket Set - Complete Overhaul Gasket Set with crankshaft seals. For H, HV, O4, OS4, W4, Super H, Super HV, Super W4 (Part No: GK7509S)$151.20 [Show Picture]

Crankshaft Seal Front - Fits, 152 CID, 164 CID, 169 CID, 175 CID 4 cylinder gas engines: Models, 300, 350, H SN# <106970, H SN-106908-391357, H SN- 391358>, HV SN# <106970, HV SN# -106908-391357, HV SN- 391358>, O4 SN# <33339, O4 SN# 33340>, OS4 SN# <33339, Super H, Super HV, Super W4, W4 SN# <33339, W4 SN# 33340> (Part No: 360692R91)$25.75

Crankshaft Seal Rear - Fits, 152 CID, 164 CID, 169 CID, 175 CID gas 4 cylinder engines: Models, 300, 350, H SN- 106908-391357, H SN- 391358>, HV SN# <106970, HV SN- 106908-391357, HV SN- 391358>, O4 SN# <33339, O4 SN# 33340>, OS4 SN# <33339, OS4 SN# 33340>, Super H, Super HV, Super W4, W4 SN# <33339, W4 SN# 33340>. ** Sold in Multiples of 2, priced each. (Part No: 45014D)$6.11

Gasket Set, Upper - 152 CID 4 cylinder gas engines. For models H SN# <106970, H SN- 106908 to 391357, H SN# 391358<, HV SN# <106970, HV SN- 106908 to 391357, HV SN# 391358<, O4 SN- <33339, O4 SN- 33340<, OS4 SN- <33339, OS4 SN# 391358<, W4 SN- <33339, W4 SN# 391358<. (Part No: 354475R1)$67.90

Gasket, Water Header - For models 300, 350, H, Super H, Super HV. (Part No: 45266DA)$4.27

Head Gasket Set - For 152 CID 4 cylinder gas in: H, HV, O4, OS4, Super H, Super HV, Super W4, W4 (Part No: VGK7509S)$98.64

Manifold Gasket Set - Manifold gasket set, contains two 1342802C1 gaskets. Used with manifolds 8033DCX and 352536R21. For models 300, 350, H, HV, O4, OS4, Super H, Super HV, W4 (Part No: MS8774B)$11.82 [Show Picture]

Oil Pan Gasket - OIL PAN GASKET For tractors with 152 CID Gas engines in models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4 (Part No: 45267DA)$15.00

Oil Seal - Oil seal, countershaft. For models H, Super H. (Part No: 71701C1)$15.38 [Show Picture]

Oil Seal - Oil seal, driving shaft. For models H, Super H. (Part No: 383159R91)$11.44

 
Engine Overhaul Kits
Basic Engine Overhaul Kit, Less Bearings, C152 Gas or Distillate, Flat Head Pistons - Models: H & HV To SN# 391357, and O4, OS4, W4 To SN# 33339. Made by TISCO. Basic overbore 3-3 8" to 3-7 16" Engine Kit, Less Bearings (C152 CID Gas OR Distillate 4-cylinder engine) For tractors with flat head pistons. Kit contains sleeves, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals. Engine bearings are available separately (see 'Engine Bearings' category). (Part No: BEKH1152A-LCB)$441.13 [Show Picture]

Basic Engine Overhaul Kit, Less Bearings, C152 Gas or Distillate, Flat Head Pistons - 2. Models: H & HV SN# 391358 & Up. And O4, OS4, W4 SN# 33340 & Up. Made by TISCO. Basic overbore 3&3 8" to 3&7 16" Engine Kit, Less Bearings(C152 CID Gas OR Distillate 4-cylinder engine) For tractors with flat head pistons. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Part No: BEKH1152E-LCB)$412.33

Basic Engine Overhaul Kit, Less Bearings, C152 Gas, Stepped Head Pistons - 3. Models: H & HV SN# to 391357. And O4, OS4, W4 To SN# 391357. Made by TISCO. Basic overbore 3&3 8" to 3&7 16" Engine Kit, Less Bearings(C152 CID Gas 4-cylinder engine) For tractors with stepped head high compression pistons-valve length 5-5 16. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Part No: BEKH1156A-LCB)$413.31

Basic Engine Overhaul Kit, Less Bearings, C152 Gas, Stepped Head Pistons - For models H & HV SN# 391358 & Up. Made by TISCO. Basic overbore 3&3 8" to 3&7 16" Engine Kit, Less Bearings(C152 CID Gas 4-cylinder engine) For tractors with stepped head high compression pistons-valve length 5-5 16. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Part No: BEKH1156E-LCB)$365.92

Basic In-Frame Engine Kit, C152 Gas, Flat Head Pistons - 5. Made by TISCO. In Frame Engine Kit For models (C152 CID Distillate 4-cylinder engine)Overbore 3&3 8" to 3&7 16" For tractors with flat head pistons. Models: H & HV, O4, OS4, W4. Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Part No: BIFH1152A)$410.72

Basic In-Frame Engine Kit, C152 Gas, Stepped Head Pistons - 6. Made by TISCO. In Frame Engine Kit. (C152 CID Gas 4-cylinder engine)Overbore 3&3 8" to 3&7 16" For tractors with stepped head high compression pistons-valve length 5-5 16. For models H, HV, O4, OS4, W4. Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Part No: BIFH1156A)$393.47

Engine Overhaul Kit - Made by TISCO. Overhaul Kit For H & HV to SN# 106709, O4, OS4, W4, to SN# 33339 (C152 CID 4-cyl Gas) (Flat head standard compression pistons. Stepped head available...) Contains Sleeve & Piston Kit (sleeves, pistons & rings, pins & retainers, overbore from 3-1 8" to 3-7 16"). Piston Pin Bushings. Complete Gasket Set. Connecting Rod Bearing Kit. Main Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides and keys). Available with Std., .010 or .020 bearings.. IMPORTANT: Specify Rod and Main bearing sizes, and the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152A)$624.48

Engine Overhaul Kit - Made by TISCO. Overhaul Kit For H & HV SN# 106908 to SN# 391357 (C152 CID 4-cyl Gas), (Flat head standard compression pistons. Stepped head available...) Contains Sleeve & Piston Kit (sleeves, pistons & rings, pins & retainers, overbore from 3-1 8" to 3-7 16"). Piston Pin Bushings. Complete Gasket Set. Connecting Rod Bearing Kit. Main Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides and keys). Available with Std., .010 or .020 bearings.. IMPORTANT: Specify Rod and Main bearing sizes, and the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152C)$673.12

Engine Overhaul Kit - Made by TISCO. Overhaul Kit For H & HV SN# 391358 & Up (C152 CID 4-cyl Gas) (Flat head standard compression pistons. Stepped head available...) Contains Sleeve & Piston Kit (sleeves, pistons & rings, pins & retainers, overbore from 3-1 8" to 3-7 16"). Piston Pin Bushings. Complete Gasket Set. Connecting Rod Bearing Kit. Main Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides and keys). Available with Std., .010 or .020 bearings.. IMPORTANT: Specify Rod and Main bearing sizes, and the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152E)$657.24

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C152 CID Distillate 4-cylinder engine) For tractors with flat head pistons. Models: H & HV To SN# 391357 and O4, OS4, W4 To SN# 33339. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152-LCB)$566.34

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C152 CID Distillate 4-cylinder engine) For tractors with flat head pistons. Models: H & HV SN# 391358 & Up, O4, OS4, W4 To SN# 33340 & Up. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152B-LCB)$570.90

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C152 CID Gas 4-cylinder engine) For tractors with flat head standard compression pistons-valve length 5-5 16. Models: H & HV to S 106907, O4, OS4, W4 To SN# 33339. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152A-LCB)$545.86

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C152 CID Gas 4-cyl. eng.) For tractors with flat head standard compression pistons-valve length 5-15 32. Models: H & HV SN# 106908 To SN# 391357. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152C-LCB)$555.23

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C152 CID Gas 4-cyL eng) For tractors with flat head standard compression pistons-valve length 5-15 32. Models: H & HV SN# 391358& Up. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152E-LCB)$585.35

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C152 CID Gas 4-cyl eng)For tractors with stepped head high compression pistons-valve length 5-5 16. Models: H & HV To SN# 106907, O4, OS4, W4 To SN# 33339. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENG BEARINGS MUST BE ORDERED SEPARATELY. IMPORTANT: Specify Rod and Main bearing sizes, and the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1156A-LCB)$540.26

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C152 CID Gas 4-cyl eng) For tractors with stepped head high compression pistons-valve length 5-15 32. Models: H & HV SN# 106908 To SN# 391357. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1156C-LCB)$555.23

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C152 CID Gas 4-cylinder engine) For tractors with stepped head high compression pistons-valve length 5-5 16. Models: H & HV SN# 391358 & Up. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1156E-LCB)$585.35

Major Overhaul Kit - 152 CID 4 cylinder gas engines overbore 3-3 8" to 3-7 16. For models H SN# 391358>, HV SN# 391358>, O4 SN# 33340>, OS4 SN# 33340>, W4 SN# 33340>. Kits include, 4 Piston liner kits, 1 Main bearing set, 4 Conn rod bearings, 4 Piston pin bushing, 1 Front crank seal, 1 Cam bearing set, 1 Gasket overhaul set with rear seal. **IN COMMENT SECTION SPECIFY ROD & MAIN BEARING SIZES, PISTON TYPE (FLAT OR STEPPED HEAD), PIN BUSHING SIZE (.935 OR 1.168)** (Part No: OK214)$726.33

Valve Overhaul Kit, C152 Gas Engine - Made by TISCO. Fits 4 cylinder C152 engine on : H, HV, to SN# 106907, O4, OS4, W4. Kit includes Valves(5-5 16 Length), Valve Springs(For Non-Roto Exhaust Valve), Valve Keys, Valve Guides. (Part No: VOKH152B)$114.83

Valve Overhaul kit, C152 Distillate Engine - Made by TISCO. Fits H, HV, O4, OS4, W4 (4cyl C152 DISTILLATE engine). Kit includes Valves, Valve Springs(For Non- Roto Exhaust Valve), Valve keys, Valve Guides. (Part No: VOKH152A)$170.30

Valve Overhaul kit, C152 Gas Engine - Made by TISCO. Fits H, HV, SN# 106908 & up, Super H, HV, Super, W4, 300, 350, (4 cyl gas C152, C164, C169, C175). Kit includes Valves(5-15 32 Length), Valve Springs (For Non-Roto exhaust valve), Valve Keys, Valve Guides. (Part No: VOKH152C)$218.39 [Show Picture]

 
Engine Parts
Camshaft Timing Gear - 48 teeth. For models (H, HV with C-152 engine), (Super H, Super HV with C-164), (300 with C-169). (Part No: 6664DB)$114.28 [Show Picture]

Connecting Rod - Reconditioned. For models H, W4 gas with 1.109" wrist pin and casting # 43785DC. (Part No: R1201862)$102.33

Connecting Rod Bolt Lock Tab - .420" bolt hole diameter. For models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350 gas or LP. (Part No: 47499DB)$3.99 [Show Picture]

Crankshaft, Reground - For H & W4. Includes Rod & Main bearings. For casting number 43734DB (the number stamped on your crank must match this number EXACTLY). NO CORE (Part No: 43734DB)$655.16

Cylinder Head Service Kit - Contains Springs, Guides and valve lock. Cylinder HEAD Service KIT For 300, 350, H, HV, Super H, Super HV, Super W4 (Part No: VSKH152C)$67.23

Cylinder Head Stud - 7 16 inch x 6 1 8 inch. For gas and LP Models: H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350. (Part No: 48939DA)$12.75 [Show Picture]

Cylinder Head, Rebuilt - Comes complete with seats and guides but NOT valves. For models H, W4 both with gas engines and casting # 8776. (Part No: R1193630)$511.56

Cylinder Head, Rebuilt - Comes complete with seats and guides but NOT valves. For models H, W4 both with gas engines and casting # 6186. (Part No: R1193846)$461.49

Hand Starting Crank - For models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450. Hand Starting Crank. Less Spinner. (Part No: 51544DBX)$69.93 [Show Picture]

Ring Gear Flywheel - For models H, Super H, Super W4, 300, 330, 340, 350. This flywheel has 104 teeth, 13.165 inches O.D., 12 inches I.D., .550 inches wide (Part No: 45638DB)$62.98 [Show Picture]

Timing Gear, Crankshaft - 24 teeth. For models (H, HV with C-152 engine), (Super H, Super HV with C-164 engine), (300 with C-169 engine). (Part No: 43706D)$74.95 [Show Picture]

Valve Exhaust - Exhaust Valve, length 5-5 16. For models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum Order is 4. (Part No: 50707DA)$17.90 [Show Picture]

Valve Guide Set - Eight per package, enough for 1 engine. For models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Part No: 8049DR)$34.02

Valve Keys - ** Enter quantity of 1. Priced per set of 16. ** For models 100, 130, 140, 200, 22, 230, 240, 300, (330, 340 SN# less than 100500), 350, 62, 76, 81, A, A1, AV, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super C, Super H, Super HV, Super W4, (U2, U2A SN# less than 22113), W4. (Part No: 42026D)$8.00

Valve Set, Exhaust - Set of 4 Exhaust Valves For tractors with flat head pistons. Models: H & HV, O4, OS4, W4, Super H, Super HV, Super W4 (Part No: 57697D)$54.60 [Show Picture]

Valve Set, Exhaust - Set of 4 Exhaust Valves for tractors with flat head standard compression pistons-valve length 5-15 32. Models: H, HV, 300, 350 (Part No: 362535R1)$109.94 [Show Picture]

Valve Set, Intake - Set of 4 Intake Valves For tractors with flat head pistons. Models: H & HV, O4, OS4, W4, Super H, Super HV, Super W4 (Part No: 57696D)$50.81 [Show Picture]

Valve Set, Intake - Set of 4 Intake Valves for tractors with flat head standard compression pistons-valve length 5-15 32. For models H, HV, 300, 350. (Part No: 362534R1)$44.16 [Show Picture]

Valve Spring - ** Enter quantity of 1 for set of 8. Priced per set of 8. ** Used on valves with length of 5-5 16". For models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super AV1, Super C, (U2, U2A SN# less than 22113), W4. (Part No: 24544DA)$21.00 [Show Picture]

Valve Springs - Quantity of eight. For models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Part No: 358197R1)$37.80 [Show Picture]

Valve, Intake - Intake Valve - GAS. Length 5-5 16. For models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum Order is 4. (Part No: 50706DA)$17.36 [Show Picture]

 
Engine Pistons and Sleeves
Pin Bushing - Piston pin bushing, 4 used per engine. For C152 CID 4 cylinder engine in tractors H, HV, O4, OS4, W4. For H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Minimum order qty. is 4. Order will be increased to multiples of 4. (Part No: 25998H)$15.80

Piston Sleeve - 3 7/16 Overbore - Sleeve for H, HV, O4, OS4, W4. Verify bore size. Price is for each sleeve. 4 Required per engine. (Part No: SD22)$63.23

Piston, Flat Head - Overbore 3-3 8 to 3 7 16. Four ring piston fits 152 CID 4 cylinder gas engines: Models H SN# <106970, H SN- 106980-391357, H SN- 391358>, HV SN# <106970, HV SN- 106980-391357, HV SN- 391358>, O4 SN# <33339, O4 SN# 33340>, OS4 SN# <33339, OS4 SN# 33340>, W4 SN# <33339, W4 SN# 33340>. Uses PRS156 Ring set. (Part No: PA320)$43.33

Piston, Stepped Head - Overbore 3-3 8 to 3 7 16. Four ring piston fits 152 CID 4 cylinder gas engines: Models, H SN# <106970, H SN- 106908-391357, H SN- 391358>, HV SN# <106970, HV SN- 106908-391357, HV SN- 391358>, O4 SN- <33339, O4 SN- 33340>, OS4 SN- <33339, OS4 SN- 33340>, W4 SN- <33339, W4 SN- 33340>. Uses PRS156 ring set. (Part No: PA321)$64.50

Sleeve & Piston Kit - For H. Sleeves, (flat head) pistons & rings, pins & retainers. Overbore from 3-3 8 to 3-7 16 inch. (Part No: PK152)$315.04

 
Engine Rings
Piston Ring Set - 3-7 16" Overbore. Complete ring set for 4 pistons. For C152 CID DISTILLATE 4 cylinder engine. Contains 3 compression rings 3 32 and oil ring 3 16 per cylinder. For H & HV to SN# 391357, O4, OS4, W4 to SN# 33339. For H, HV, O4, OS4, W4 (Part No: PRS152)$64.15

Piston Ring Set - 3-7 16 Overbore. Complete ring set for 4 pistons. Contains 3 compression 3 32 and oil ring 3 16 for each cylinder. For C152 CID gas 4 cylinder engine used on H & HV, O4, OS4, W4. (Part No: PRS156)$64.15

Piston Ring Set - 3-3 8" bore. Includes 1 8 inch (1) COMP RING, 5 32 inch (2) COMP RINGS, & 1 4 inch (1) OIL RING. Complete set for 1 engine. For C152 engine in models: H, HV, O4, OS4, W4. (Part No: 2C726)$113.51

Piston Ring Set - 3-7 16 Overbore. Complete ring set for 4 pistons. Contains 3 compression rings ((2) 3 32 and (1) 1 8) and (1)1 4 oil ring for each cylinder. For C152 CID gas 4 cylinder engine used on H & HV, O4, OS4, W4. (Part No: 2C7790)$113.74

Piston Ring Set - Complete ring set for 4 pistons. Contains 3 compression 3 32" and 1 oil ring 1 4" per cylinder. Piston Ring Set - 3-9 16 bore. Complete ring set for 4 pistons. For C152 CID gas 4 cylinder engine used on H & HV, O4, OS4, W4. For C169 300 Farmall. and C175 2400B, 3400A. (Part No: 2C7547)$111.05

Piston Ring Set - overbore 3-7 16 ring set. 12 compression rings 3 32", 4 oil rings 1 4". For models (H, HV up to SN# 391357), (I4, O4, OS4, W4 up to SN# 33339). (Part No: 2C5669)$108.41

 
Exhaust System
Exhaust Pipe - Short threaded pipe screws into manifold. 10.5 inches lone, 2 3 8 inch outside diameter. For 300, 350, H, Super H, Super W4, W4; all GAS engines. (Part No: 62476D)$18.76

Exhaust Stack, Chrome, Curved - Double wall. 2 3 8 inlet I.D., 27 inches overall length, 3 1 2 inches O.D.. For models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Part No: R4451)$128.99 [Show Picture]

Exhaust Stack, Chrome, Straight - Double wall, 2 3 8 inlet, 3 1 2 outlet, 24 overall length. For models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Part No: R4450)$109.15 [Show Picture]

Manifold - Heavy duty intake exhaust manifold comes with short straight pipe for vertical exhaust that screws into manifold. For 300, 350, H, Super H, Super W4, W4; all GAS engines. Includes gaskets. (Part No: 8033DCX)$157.92 [Show Picture]

Muffler - Vertical muffler for tractors. 6" round body replaces oval body mufflers. Inlet I.D. 2-3 8, Outlet O.D. 2-1 2, total length 29, diameter 6" round body. For gas tractor models: H & Super H, M & MV Super M & Super MTA, W4 & Super W4, W6 & Super W6, W6TA, (300 & 350 with C-175 gas), (400 & 450 with C-281 gas or D-281 diesel), (460 & 606 with C221 gas or D-236 diesel), (560 with c-263 gas or D-282 diesel). (Part No: 403551R1)$26.28 [Show Picture]

Muffler Clamp With Hardware - Muffler clamp with hardware. For models 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, 706, H, HV, M, MD, Super H, Super HV, Super M, Super MD, Super MTA, Super W6, W4, W6, WD6. (Part No: 350602R1)$30.30 [Show Picture]

Muffler Oval - Muffler - Vertical muffler for tractors. 6".Oval body replaces oval body mufflers. Inlet I.D. 2-3 8, Outlet O.D. 2-1 2, total length 29, diameter 6" round body. For gas tractor models: H & Super H, M & MV Super M & Super MTA, W4 & Super W4, W6 & Super W6, W6TA, (300 & 350 with C-175 gas), (400 & 450 with C-281 gas or D-281 diesel), (460 & 606 with C221 gas or D-236 diesel), (560 with c-263 gas or D-282 diesel). (Part No: 403551R1-OVAL)$77.58 [Show Picture]

Muffler, Vertical - For models H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Vertical, 5 1 2 inch Round, 2 3 8 inch inlet I.D., 2 1 2 inch outlet O.D., 29 inch overall length. (Part No: 350600R95)$40.84 [Show Picture]

Vertical Exhaust Muffler - Stainless Muffler also replaces 355869R1, 350600R95. For models H, HV, I4, Super H, Super HV, W4, Super W4. (Part No: 51070D)$117.50

 
Fuel System / Air Intake
Air Cleaner Cap - Old style dome shape. For models H, Super H, W4, 300, 350. Replaces 353019R92. Specify in comments whether you want it to slide over or into the pipe. (Part No: 355935R91)$31.50

Air Cleaner Cap - Newer style mushroom shape. For models H, Super H, W4, 300, 330, 340, 350, 404, 424, 444, 504 Gas. air Cleaner Cap 2" I.D. (Part No: 51435DBX)$42.15 [Show Picture]

Basic Carburetor Kit - For IH 45108DB Carburetor. These carburetors came on H, HV and W4 models. (Part No: IHCK12)$26.67 [Show Picture]

Carburetor Float - For updraft International carburetors 45108DB, 45108DC, 45108DD, 50981DA, 50981DB, 50981DC, 50981DD. For models H, HV, O4, OS4, W4. Replaces 45114D, 45114DD, 45114DC, 45114DB, IHS203. (Part No: 45114DX)$19.95 [Show Picture]

Carburetor Kit, Basic - For models H, HV and 4 (Distl.) with OEM# 45108DB and 50981DA. Contains the following parts with instructions. Includes: gaskets, seats, and springs. (Part No: BK10V)$17.98 [Show Picture]

Carburetor Kit, Comprehensive - For models H, HV and 4 (Distl.) with OEM# 45108DB. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. Does not include float. (Part No: C510V)$37.50 [Show Picture]

Carburetor Kit, Comprehensive - For H, HV and 4 with Zenith 50981DA. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. Does not include float. (Part No: C510HV)$46.63 [Show Picture]

Carburetor Venturi - For carburetors: 45108D, 45108DA, 45108DB, 45108DC, 45108DD or 50981D, 50981DA, 50981DB, 50981DC, 50981DD (Part No: 64986D)$34.95

Friction Disk - For models H and M. Friction Disk for FTL153 Throttle Assembly ** Must be ordered in multiples of 5, priced each. ** (Part No: TD153)$3.10 [Show Picture]

Fuel Cap - For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1 2 inches tall, Triple Baffle Style. (Part No: R3654)$30.60 [Show Picture]

Fuel Cap - 1 15 16 inch overall outside diameter fits many: 240, 300, 350, 400, 450, 600, 650, H, HV, M, MD, MDV, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super W6, Super WD6, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 40756D)$26.82 [Show Picture]

Fuel Cap - Black - (Vented) - Black Fuel Cap. REPLACES : 361910R91, 538063R1, 224839C91, 224839C92. Fits MOST: A, C, Cub, Cub Lo-Boy, Cub 185-Lo-Boy, H, M, MD, Super A, Super C, Super H, Super M, Super W4, Super W6, W6, W9, 100, 130, 140, 184, 200, 230, 300, 330, 340, 350, 400, 403, 404, 424, 444, 450, 460, 503, 504, 544, 560, 606, 615, 656, 706, 715, 756, 766, 806, 815, 826, 856, 915, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1640, 1660, 1670, 1680, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 4166, 4186. Cap fits neck inside diameter of 1 7 8 inches using 2 locking tabs. (Part No: 23995DC)$7.10 [Show Picture]

Fuel Cap, Chrome, Unvented - Fits MOST of the following GAS and Diesel tractors: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, 04, 06, W4, W6, Super W4, Super W6, W9, 100, 130, 140, 4156, 4166, 4168. Cap fits neck inside diameter of 1 7 8 inches using 2 locking tabs. (Part No: 23995DC-CHROME)$7.64 [Show Picture]

Fuel Cap, Top Vented - 2-11 16" I.D., 1.500" height (including splash guard) and 1.118" height. Says "Buy Clean Fuel Keep it Clean". For models A, AV, B, BN, C, Cub, Cub Lo-Boy (-(WILL NOT FIT 154, 184, 185)-), F12, F14, F20, F30, H, HV, I4, I6, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD18A, TD20, TD6, TD9. (Part No: 12770D)$9.95 [Show Picture]

Fuel Cap, Vented - For MOST Models: A, Super A, B, C, Super C, H, Super H, M, Super M, Cub, 100, 130, 200, 230, 300, 350, 400, 450. Says Buy Clean Fuel . Cap fits neck inside diameter of 1 7 8 inches using 2 locking tabs. Replaces IHS226, AR369R, AD709R, AH83351, B824, 7A824, 161945A, 30-3049558. (Part No: 23995DA)$9.95 [Show Picture]

Fuel Line, From Tank - For models H and HV SN# 50866 and up. Fuel Line, Metal pipe from Fuel Tank to Strainer with two nuts. Restoration quality. (Part No: 58367DAX)$47.64 [Show Picture]

Fuel Line, To Carburetor - For models H and HV SN# 50866 and up. Fuel Line, Metal pipe from fuel strainer to carburetor with two nuts. Restoration quality. (Part No: 58366DX)$55.23 [Show Picture]

Gas Lever - For H, M. Gas Lever Friction Disc and Spring Combination. Easily attaches with 2 bolts. Allows accurate speed control setting. Replacement Spring (HGL5) $2.50, and Friction Disc (TD153-only in multiples of 5 at $1.50 each) are available. (Part No: FTL153)$38.85 [Show Picture]

Gas Line With FTG - Buna-N flex gas line. For models 300, 350, 400, H, M, Super H, Super M. Line has 5 16 Inverted Flare Fittings. Additional hardware may be required. (Part No: FLM16)$23.93 [Show Picture]

Governor Control Sector - Governor control sector with pivot pin for tractors:H & HV, Super H & Super HV, M & MV, Super M & Super MV. (Part No: 51351DBXA)$72.33 [Show Picture]

Pre-Cleaner Assembly - Complete, glass dust bowl assembly, 2" I.D. base, just like the original. For models H, Super H, HV, I4, O4, OS4, W4, Super W4, 300, 350. (Part No: 59095D)$92.95 [Show Picture]

Pre-Cleaner Bowl - Glass bowl for pre-cleaner assembly 59095D, 59096D. (Just like the original). Tractors: H, Super H, HV, I4, O4, OS4, W4, Super W4, 300, 350, M, MD, Super M, MTA, W6, WD6, I6, O6, ID6, OS6, ODS6, Super WD6, 400, W400, 450, W450. (Part No: 54082D)$25.30

Sediment Bowl Assembly - Fuel Strainer assembly with 2.25" bowl, 1 8 inch pipe thread inlet, for gasoline tractors: H, HV, M, Super M & MTA, O4, OS4, W4, 460, 560, 600, 650, 656, 660, 706, 756, 766, 806, 826, 856. Replaces OEM 358245R91, 370832R91. (Part No: S.61581)$25.04 [Show Picture]

Sediment Bowl Assembly Glass Bowl - Fits S.61581 fuel strainer. For models H, HV, M, Super M & MTA, O4, OS4, W4, 460, 560, 600, 650, 656, 660, 706, 756, 766, 806, 826, 856. (Part No: S.65504)$6.74

Throttle Plate Assembly - For H, M. Throttle Plate Assembly - Saw-Tooth Style. Replaces IHS490, 366727R91, Lever: 51348DAX. (Part No: 51351DBX)$55.50 [Show Picture]

Throttle Spring - Replacement Spring for FTL153 Throttle Assembly. (Part No: HGL5)$3.00 [Show Picture]

 
Gauges
Amp Gauge - 20-20 Style - with IHC Logo For A, B, C, H, M, W-4, W-6, W-9(To 1946) (Part No: R4186)$24.75 [Show Picture]

Amp Gauge - D-O-C Style - with IH Logo For Super A, Super C, H, Super H, M, Super M, Super MTA, Cub (From 1955), W4, W6, 200, 230, 240, 300, 350, 400, 450. Replaces 393334R91, 378424R91, 360053R92, IHS395. (Part No: 360053R91)$16.50 [Show Picture]

Amp gauge - Gauge, ammeter has 20-0-20 range. Original style with IH logo. Fits 2" dia. hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418. (Part No: 354473R91)$26.50 [Show Picture]

Oil Gauge - Oil pressure gauge, 80 pound, fits 2 diameter hole. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, W4, 400, W6, W9, A, B, C, H, M, Super C, Super W9, Super A. (Part No: 536962R1)$14.24 [Show Picture]

Oil Pressure Gauge - Zone Style - with IH Logo with Studs - Does not include bracket. For H, Super H, M, Super M, Super MTA, W-4, Super W4, W-6, Super W6, W-9, Super W9 (From 1947) (Part No: R2738)$44.25 [Show Picture]

Water Temperature Gauge - For H, M, W-4, W-6, W-9. For tractors equipped with conventional type radiators SN# 501 to 115029. Water Temperature Gauge with 19" Lead, "IHC" Logo. (R3695) (Part No: 63783D)$44.89 [Show Picture]

Water Temperature Gauge with IH Logo - TEMPERATURE GAUGE WITH 19 inch LEAD & IH Logo. FITS MODELS A, H, M, Super A, Super M (300, 350 UTILITY). Fitting may require the OEM Adapter 51510D which we do not have available. (Part No: 67135D)$25.49 [Show Picture]

 
Hitch / Drawbar
3 Point Conversion Kit - For use with ONE hydraulic cylinder.For INTERNATIONAL HARVESTER Models: H, M, MTA, Super H, Super M, Super MTA, MD, 300, 340, 350, 400, 460, and 504 - Cat. I II (Requires one 3" x 8" hydraulic cylinder.) *Hydraulic cylinders and hoses are not included. Weight is 237 Lbs. Additional shipping charges apply. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1106)$977.81 [Show Picture]

Draw Bar Roller - For models H, Super H, M, Super M, 300, 330. (Part No: R0910)$48.87 [Show Picture]

Drawbar - For models H, Super H. Drawbar. Dimensions: 3 4" thick, 50-1 2" center to center. (Part No: 357530R1)$148.63 [Show Picture]

Drawbar Strap - For models H, Super H, M, Super M, 300, 350. (Part No: 45184DA)$62.64 [Show Picture]

Fixed Drawbar - For models H (From S#36680), Super H. (Part No: R4219)$375.10

Swinging Drawbar - For models H, Super H. (Part No: R3675)$157.82

Swinging Drawbar Pin - For models H, Super H, M, Super M, 300, 330, 340, 350, 400, 450, 460, 560, 660. (Part No: FOH450)$33.63 [Show Picture]

 
Hydraulic System
Hydraulic Dipstick - Mounts inside the hydraulic pump breather fill pipe, 11.80" long. For models H, HV, M, MV, MD, MDV, Super H, Super HV, Super M, Super MV, Super MD, Super MDV, 140 Combine and 120 Windrower, all equipped with lift all countershaft driven hydraulic pump. (Part No: 15158EX)$26.88 [Show Picture]

 
Lights
Headlamp Assembly, Tear-Drop- 6Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5 inches in diameter. Price is for one headlamp assembly. Does not include mounting bracket. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W4, Super W6, Super A, W4, W6, W9, WD6, WD9. Verify your configuration (Tear-Drop vs. Flat-Back) before ordering. (Part No: 45640DB)$42.90 [Show Picture]

Headlight Lens - Replacement Glass Lens is 4.75 inch outside diameter for IH (45640DB) Headlight Assemblies. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, W4, W6, W9, WD6, WD9. (Part No: GC200)$13.66 [Show Picture]

Headlight Lens Gasket - Gasket, 4 5 8 outside diameter for lens in sealed beam units 358890R92. For models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: 358892R91)$6.74 [Show Picture]

Headlight Reflector - 4 inch - This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: S.02377)$11.52 [Show Picture]

Headlight Support Bracket - For H, Super H, M, Super M, Super MTA. Headlight Support Bracket. (4156R) (Part No: 51675DC)$74.95 [Show Picture]

Headlight Trim Ring - Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 53525DA)$19.00 [Show Picture]

Knob - Knob for combination rear light and tail light switch(used only with switch body with 15 32 shaft). For models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Part No: 359773R91)$11.00 [Show Picture]

Light Clamp - Clamp, lamp assembly for tractors. For models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W6, Super A, W4, W6, W9, WD6, WD9. (Part No: 350920R1)$10.64 [Show Picture]

Light Switch Knob - Old style for rotary light switches. For models A, AV, B, BN, C, H, HV, M, MD, MV, MDV, W4, W6, W9, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, I9, ID6, ID9, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MV, Super MDV, Super MTA, Super W4, Super W6, Super W6TA, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, Cub. (Part No: 57313D)$10.00 [Show Picture]

Light Switch, 12 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5362)$46.04 [Show Picture]

Light Switch, 12 Volt - 3 position with Old style knob, with regulator only. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5364)$45.35 [Show Picture]

Light Switch, 12 Volt - 4 position with new style knob. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5366)$46.04 [Show Picture]

Light Switch, 12 Volt - 3 position with new style knob. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5368)$46.04

Light Switch, 6 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5361)$46.04 [Show Picture]

Light Switch, 6 Volt - 3 position with Old style knob, with regulator only. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5363)$44.50 [Show Picture]

Light Switch, 6 Volt - 4 position with new style knob. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5365)$46.04 [Show Picture]

Light Switch, 6 Volt - 3 position with new style knob. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5367)$46.04

Rear Combo Light - 6 Volt Rear Combo Light Assembly with Red Jewel Light with rotary switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. Replaces 355914R91. (Part No: 355911R91)$62.05 [Show Picture]

Sealed Beam Bulb, Red & White - 4.5" dia. For models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. (Part No: 371461R92)$26.98 [Show Picture]

Switch, Worklight, with Knob - For models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. Replaces 359682R91. (Part No: 375653R92)$19.56 [Show Picture]

Tail Light Lens - 5 Inch Lens, combination rear light and tail light. For 100, 130, 200, 230, 300, 340, 350, A, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A (Part No: 350478R1)$24.66 [Show Picture]

 
Oil System
Oil Filler Cap - For models 300, 350, 400, 450, H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MTA. (Part No: 4819DX)$6.89 [Show Picture]

Oil Filter - Oil filter element, cartridge type with gasket. For gas engines: C113, C152, C248, C264, C281, in tractors: A & AV to SN# 97397, B & BN to SN# 97397, H & HV tp SN# 121021, M & MV SN# 59394 and up, Super M & MTA, 4 & W4 to 4957. 6 & W6 SN# For 4, 400, 450, 6, A, AV, B, BN, H, HV, M, MTA, MV, Super M, Super MTA, Super W6, W4, W400, W450, W6. Element is 3 1 4 inches in diameter and 7 1 2 inch overall length. (Part No: 376375R91)$15.18 [Show Picture]

Oil Filter - Oil filter element, cartridge type with gasket. Filter is 3.5 inches diameter with overall length of 5.5 inches. For gas engines: C113, C123, C135, C146, C152, C164, C169, C175. For 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 350, 404, 424, 444, 504, A, AV, B, BN, C, H, HV, Super AV, Super C, Super H, Super HV, Super W4, Super A, W4. (Part No: 376374R91)$9.66 [Show Picture]

Oil Filters, Tri Pack - Package of three oil filter elements, cartridge type with gasket. Filter is 3.5 inches diameter with overall length of 5.5 inches. For gas engines: C113, C123, C135, C146, C152, C164, C169, C175. For models 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 350, 404, 424, 444, 504, A, AV, B, BN, C, H, HV, Super AV, Super C, Super H, Super HV, Super W4, Super A, W4. (Part No: 376374R91TRIPAC)$22.46 [Show Picture]

Oil Filters, Tri Pack - Package of three oil filter elements, cartridge type with gasket. For gas engines: C113, C152, C248, C264, C281, in tractors: A & AV to SN# 97397, B & BN to SN# 97397, H & HV tp SN# 121021, M & MV SN# 59394 and up, Super M & MTA, 4 & W4 to 4957. 6 & W6 SN# For 4, 400, 450, 6, A, AV, B, BN, H, HV, M, MTA, MV, Super M, Super MTA, Super W6, W4, W400, W450, W6. Element is 3 1 4 inches in diameter and 7 1 2 inch overall length. (Part No: 376375R91TRIPAC)$32.85 [Show Picture]

 
PTO / Driveline
PTO Safety Shield - For H after SN# 118000, HV, Super H, Super HV. PTO Safety Shield. (Part No: 66387DAXA)$65.73 [Show Picture]

PTO Seal - For models H after SN# 118000, (M, MD, Super M and Super MD after SN# 59957), Late W4, W6, W9, Super W4, Super W6, Super W9, B250, B275, B414; Also fits the following modesl with transmission driven PTO (not Live PTO): MTA, 300, 330, 350, 354, 364, 384, 400, 424, 434, 444, 450, 454, 544, 600, 650, 2300, 3414, 3514, 3616. Replaces 3065217R91, 358772R91, 358812R91. NOTE: THIS SEAL IS .312 INCHES WIDE. VERIFY THE WIDTH OF YOUR OLD SEAL. YOU NEED TO INSTALL 2 OF THESE IF YOUR OLD SEAL IS WIDER. (Part No: 45702D)$17.95

PTO Shaft Guard with Clamp - For A, B, Super A, Super AV, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 504, 544, 606 and with transmission driven type tractors: 330, 330, 350, 400, 450. PTO safety guard. (Part No: 51484DX)$12.81 [Show Picture]

 
Seats
Pan Seat 4-Bolt Mount - Pan Seat with Silver padded canvas. Center brass drain hole over metal pan seat frame. For: C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 3 50, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R0906)$160.89 [Show Picture]

Pan Seat 4-Bolt Mount - Pan Seat with a RED AND WHITE VINYL Cover. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: 357518R91)$129.95 [Show Picture]

Pan Seat 4-Bolt Mount - BLACK VINYL padded cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R0903)$149.93 [Show Picture]

Pan Seat 4-Bolt Mount - SILVER Canvas cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R1113)$138.59 [Show Picture]

Pan Seat 4-Bolt Mount with Brass Drain Hole - Red & White Vinyl with Brass Drain Hole with 4-Bolt.For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R0905)$160.89

Pan Seat with Slide on Seat Bottom - RED AND WHITE Vinyl Pan seat With flip over seat with slotted Slide on Seat Bottom.For Earl Models H, M. (Part No: 49498DD)$210.28 [Show Picture]

Pan Seat with Slide on Seat Bottom - Silver Vinyl Pan seat With flip over seat with slotted Slide on Seat Bottom.For Earl Models H, M. (Part No: 49498DD_SILVER)$162.48 [Show Picture]

Seat Hinge Pin - Pin, hinge for tilt back seat bracket. Pin is 7 inches long and 3 8 inch diameter. Tractors: C, Super C, H & HV, Super H & HV~ M & MD, Super M & MTA~ Super W6 & W6TA~ 200, 230, 300, 340, 350, 400, 450, 560, 660. For 200, 230, 300, 340, 350, 400, 450, 460, 560, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super HV, Super M, Super MD, Super W6, W6TA. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. (Part No: 356892R2)$22.42 [Show Picture]

Seat Shock, Mid Mount - With One Bolt Hole & One Stud 7 1 4 When Compressed For H (From S#281556), M (FromS#165271), Super M, Super MTA with Mid Mounted Shock. Replaces R3702, IHS465. (Part No: 353204R93)$39.95 [Show Picture]

Seat Shocks - Rear Mount - For H and HV with SN# 15698 to 281555; M, MD, MDV, Super MD and Super MDV with SN# 9287 to 165270. Rear Mount Seat Shocks are 11 1 2 inch center to center compressed length. Replaces IHS329. (Part No: 352587R92)$32.50 [Show Picture]

Seat Spring - Cone Shape SPRING Measures 13 inches tall and 8.5 inches at base. For models 200, 230, 300, 350, 400, 450, 460, 560, 600, 650, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super M, Super MTA. Replaces IHS030. (Part No: 354670R2)$27.95 [Show Picture]

Seat Support Pivot Rod - Rod that fits in the end of the Seat Support. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. (Part No: 352648R1)$33.84 [Show Picture]

 
Sheet Metal / Body Parts
Battery Box - For H, Super H, HV, W4. Battery Box with Cover. Replaces OEM# 51686DBX. Outside dimensions: 9 3 8 inches in length, 7 11 16 inches wide, 9 inches tall. (Part No: 51680DB)$88.50

Battery Box Lid - For H, Super H, HV, W4. Battery Box Cover. (Part No: 51686DBX)$39.50

Battery Hold Down Rubber - 3 4" tall, inserts into the retainers in the battery box lid. For models Cub, Cub Lo-Boy, A, AV, B, (BN, C 51690D), AI, H, HV, M, MV, MD, MDV, W6, W9, WD6, Super A, Super C, Super H, Super HV, Super M, Super MTA, Super W6, 100, 130, 140, 200, 230, 600, 650. (Part No: R5103)$6.00

Fender - For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450, and will also work (though not exactly original) for: 340, 460, 504, 560. This fender fits either left or right side. You must order two for a complete set. An additional $20.00 shipping charge will be added for each fender due to weight and or size. Mounting Plate and Spacer sold seperately. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 51500DB)$132.00 [Show Picture]

Fender Extension Mounting Kit - One kit used per tractor. For models H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDTA, O4, Super W4, W6, WD6, Super W6, Super W6TA, W9, WD9, Super WD9, 100, 130, 140, 400, 230, 240, 300, 330, 340, 350, 400, 450. Fender mounting Kit includes 2 fender flat brackets with (34 Pieces) all mounting hardware. ADD $5.00 to shipping costs due to weight. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. Replaces IHS364. (Part No: 8000072)$58.50 [Show Picture]

Fender Mounting Plate - For Farmall H, Super H, M, Super M, For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450. This fender mounting plate fits either left or right side. You must order two for a complete set 1 tractor. (Part No: 51500PL)$23.41 [Show Picture]

Fender Mounting Spacers - For Farmall H, Super H, M, Super M, For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450. This fender mounting spacer fits either left or right side. Price is for each, Min order QTY is 4. (Part No: 51502D)$2.99

Grill Screen - Original 3 16" Wire Mesh sheet. Each 24" x 36" sheet is made of original thickness wire & includes clips. Cut sheet to appropriate grill screen size for your tractor. For Farmall models A thru 450. (Part No: R4476)$36.00

Grill Screen Insert - For H, Super H, HV, Super HV. Grill Screen Insert. (R1554) (Part No: 48963DXA)$35.00 [Show Picture]

Tool Box - Light bar mount, includes decals and brackets. For models H, Super H, M, Super M, Super MTA. (Part No: 999760R91)$112.20 [Show Picture]

 
Steering
Axle - Heavy duty main axle assembly includes bushings. For models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Additonal $45 will be charged For shipping due to weight). IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 7453)$590.68 [Show Picture]

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 11-5 8" Verticle shaft tube. For models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 7465)$193.37 [Show Picture]

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 9-5 8" Verticle shaft tube. For models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 7470)$191.47 [Show Picture]

Front Axle Assembly, Wide, without hubs - For H, Super H, 300, 350. Complete Front Axle without Hubs contains cap screws with lock washer, Steering Bracket Assembly, Rear Saddle Assembly, Front Saddle Assembly, Spindles, and Castlellated nuts. Width on wide axles are adjustable from 60" to 86". ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: 21015)$1316.90

Front Axle Bumper - For H, HV, Super H, Super HV, M, MV. (R3693) (Part No: 12522D)$92.49 [Show Picture]

Oil Seal - Oil seal for bearing kit FW113FS. Tractors H, Super H, M & MD, 4, Super W4, 300, 350. For 2606, 300, 350, 4, 460, 504, 606, H, M, MD, Super H, Super M, Super MD, Super W4 (Part No: 48539DA)$12.50 [Show Picture]

Spindle Bushing - Fits 1.667" dia. Spindles replaces 376099R1 for use with A-71785HD & OEM spindle. **Minimum order Qty is 2, price is for each. (Part No: 358958R2)$10.50 [Show Picture]

Spindle-LH - Fits models H, HV, Super H, Super HV, 300, 350 (Does NOT fit Utility Models). (Part No: 360419R91)$201.26 [Show Picture]

Spindle-RH - Fits models H, HV, Super H, Super HV, 300, 350 (Does NOT fit Utility Models). (Part No: 360420R91)$201.26 [Show Picture]

Steering Shaft - For H, HV, Super H, Super HV, Farmall 300, 350. (Part No: 50047DB)$127.33 [Show Picture]

Steering Universal Joint - For models H, Super H, M, Super M, 300, 350, 400, 450. Steering Universal Joint complete joint with yokes, pins and grease fitting. Not for 'Keyed ' yokes. (Part No: USJ78)$71.79 [Show Picture]

Steering Wheel - 16" dia, 3 4" keyed hub, 3 covered spokes. For models (F12, F14, F20, F30, A, B, H, M all early from 1937-1940). (Part No: 29118DC)$60.18

Steering Wheel - 17-5 8" diameter, 3 4" hub, for keyed shaft. 3 Spoke. Super A SN# 356000 & up, C, Super C, H, Super H, M, Super M, MD, W4, Super W4, W6, Super W6, W9, 100, 130, 200, 230, 240 & 300, 350, 400, 450 without Power Steering. Metal Spokes. Replaces IHS328. (Part No: 60070D-OE)$49.50 [Show Picture]

Steering Worm Gear - For H, HV, Super H, Super HV, Farmall 300, 350. This 32 teeth gear mates with the bottom of the steering shaft. Can use 50038DA with 19 teeth also. (Part No: 50038DB)$112.92

Thrust Bearing - For models 684, 685, 685XL, 686, 695, 695XL, 706, 756, 766, 782, 784, 786, 806, 826, 856, 86 SERIES with AXLE PIVOT BALL, NOT PIN), 88 SERIES EARLY with AXLE PIVOT BALL, NOT PIN), 884, 885, 885XL, 886, 895, 895XL, 966, 986, H, HV, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86, M, MTA, Super H, Super HV, Super M. (Part No: 185106C1)$11.49 [Show Picture]

Thrust Bearing, Axle - Standard duty. Fits Schwartz Speeco type front ends. For models 300, 350, (354, 364 last SN# models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last SN# models), H, M, MTA, Super H, Super M. Replaces OEM# 392671M91. (Part No: T163)$21.32

Tie Rod - Long notched With seal and stud nut for Swartz front end. For models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H. (Part No: 22513)$57.37

Tie Rod Tube Kit - For a Swartz front end. Kit includes, 1 tie rod tube, 1 plug, 1 ball stud, 2 1 8" cotter pins, 1 dust seal. For models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M (Part No: 22812)$51.65

Upper Front Bolster Pivot Shaft - For H SN# 167994 & up, Super H, 300, 350. Upper Front Bolster Pivot Shaft. (Part No: 69060D)$141.55 [Show Picture]

 
Wheels
Bearing Cone - Inner cone for bearing kit FW113FS. Tractors H, Super H, M & MD, 4, Super W4, 300, 350. For 300, 350, 4, H, M, MD, Super H, Super M, Super MD, Super W4 (Part No: ST2049)$12.20

Bearing Cup - Inner cup for bearing kit FW113FS. Tractors H, Super H, M & MD, 4, Super W4, 300, 350. For 300, 350, 4, H, M, MD, Super H, Super M, Super MD, Super W4 (Part No: ST974)$8.12

Clamp Lock Nut - Wheel Clamp Lock Nut. 7 8-14 thread. Fits front wheel on tractors: H, Super H~ M, Super M~ B275, 300, 350, 400, 450, 460, 560. For 300, 350, 400, 450, 460, 560, B275, H, M, Super H, Super M (Part No: LN10-5)$18.70

Front Rim - Front Rim - Models H and M With Adjustable Tread Wheels - Blank front rim with 3 Loops (no center). 4-1-4 x 16. For models H and M. Add additional $10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R4179)$162.47

Front Rim, No Loops - Blank front rim (no center). 4-1 4" x 16", no loops. For Models: H, I4, I6, ID6, M, MD, O4, O6, W4, W6, WD6. Replaces: 354244R91, 354223R1, IHS193. Add additional $10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R2056)$57.85 [Show Picture]

Front Wheel Bearing Kit - Complete for 1 wheel. For models H, Super H, M, MD, Super M, Super MD, Super W4, 300, 350. Replaces 5ST2049, ST974, 13321DA, 13417D. (Part No: S67453)$40.08 [Show Picture]

Wheel Bearing Kit, Wide Axle Assembly - For models H, HV, M, MD, MF, SMD, Super H, Super HV, SW, W4, 300, 350, 330. This is a complete front axle kit for one wheel used on wide axle assembly (only). Contains: 14138A(Cone), 14274(Cup), 1779(Cone), 43828D (Gasket), 704083R1(Seal), 48548D(Seal Retainer), 1729(Cup). Inner bearing I.D. is 1.37", O.D. 2.71". Outer bearing I.D. is 0.93", O.D. 2.23", Seal I.D. is 1.74", O.D. 2.83". (Part No: WBKIH4)$29.57 [Show Picture]

 
Brakes
Brake Actuating Spring - Used with disc brakes. For models H, HV, Super C, Super H, O4, OS4, W4, 200, 230, 240, Farmall 300, 330, 340, Farmall 350, 404, 460, 504, 544, 606, 2404, 2504, 2544, 2606, 203, 205, 315, 615. (Part No: A30910)$10.00

Brake Disc - Bonded Lined disc measures 5 5 8 x 3 3 8 inches, 10 spline. For Tractors: H SN# 391358 & Up, Super H, Super W4; 300, 350. Replaces 356071R91, 368183R91. (Part No: 1975457C3)$17.96 [Show Picture]

Brake Pedal Return Spring - For Models: 300, Super M, Super MD, Super MTA, Super W6, Super W6TA, OS6, ODS6, Super H, Super HV, 350, 400, 450, W400, W450, 460, 560, 660. Replaces IHS873. (Part No: 357164R1)$9.95

Brake Shaft - For models Super H, Super W4, 300, 350. (Part No: 358051R1)$72.56 [Show Picture]

 
Clutch
Bearing - Pilot - New Pilot Bearing. 25mm (.9843") I.D., 52 mm (2.0472") O.D. with seals on both sides. For tractors: 400, 450, 500, 560, 600, 660, H, HV, M, M500, MD, MDV, MV, Super H, Super M, Super MD, Super MTA, Super W4, Super W6, W4, W6, WD6. (Part No: ST544)$3.86 [Show Picture]

Clutch Release Bearing, Greaseable - For models A, Super A, B, C, Super C, H, Super H, 100, 130, 140, 200, 230, 240, 404, 2404. This bearing is 3.5625" O.D., 2.0625" I.D. (Part No: 361292R91)$31.71 [Show Picture]

Pressure Plate - 10" Rockford style. Fits Models: H, HV, Super H, Super W4, W4. (Part No: 52900D)$185.73 [Show Picture]

Pressure Plate, 9 Inch - Rockford Style Clutch Pressure Plate. Fits Models: H, HV, Super H, Super W4, W4. (Part No: 70228926)$138.94 [Show Picture]

Remanufactured Clutch Kit - Clutch kit, contains remanufactured pressure plate assembly, 12 17 spline, 1-3 4 hub, 12 springs~ remanufactured disc, 12, 11 spline 1-3 16 hub, woven lining~ new release and pilot bearings. For tractors: Super MTA, 400, 450, 460. For 200, 230, HV, MTA, Super H, Super M. ***There will be a $24, refundable core charge added to your order*** (Part No: 359121K)$265.95

Transmission Disc - 10" Rockford style. 10 spline 1.25" Fits Models: H, HV, Super H, Super W4, W4. (Part No: 64772DA)$68.88 [Show Picture]

 
Cooling System
Fan Belt - Fan belt fits engines: C152, C164, C169, C175. For models H, 4, Super H, Super W4, 300, 350. Belt is 5 8" wide and 38-3 8" long. (Part No: 48032DA)$17.66 [Show Picture]

Header, Water Cover - Water jacket cover for Models: 300, 350, H, Super H, Super HV. (Part No: 48461DA)$26.87 [Show Picture]

Radiator - For models H & Super H, HV, Super HV, O4, OS4, W4, Super W4. Replaces OEM 352628R92. (Part No: 352628R92)$398.46 [Show Picture]

Radiator Cap - 7 LB, fits short filler neck. For models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 SN# 44C0034705 and below), (1660 SN# JJC0038346 and below), (1680 SN# JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 400, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Part No: 393229R1)$10.14 [Show Picture]

Radiator Cap - Fits Super A, Super C, *Super H, M, MD, *Super M, MD, 4, *Super W4, O6, W6, ODS6, Super W6&WD6, *W9, WD9, Super W9&WD9. * Not for short filler neck. (Part No: 67448DD)$9.14 [Show Picture]

Radiator Cap - 7 lb pressure radiator cap. (** = FOR SHORT FILLER NECK) . Fits: **Super H, **Super M, MD, **Super W4, **Super W6 & WD6, **Super W9 & WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91. (Part No: 180224M91)$9.48 [Show Picture]

Radiator Cap With Lever - Pressure cap with lever. For C, H, M, MD, O6, ODS6, Super C, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9, Super A, W4, W6, W9, WD9 (Part No: 67448DDWL)$14.95 [Show Picture]

Radiator Hold Down Spring - Also used for fuel tank hold down spring. Total 5 used per tractor. For Models H, HV, O4, O6, SUPER H, ( As radiator hold down spring only - 2 used: SUPER M, SUPER MTA, W4, W6, WD6, 400, 424, 450, 2424. (Part No: 48826D)$8.11

Radiator Pipe, Lower - Lower water pipe. For models H, HV, I4, O4, OS4, Super H, Super W4, W4. Replaces 48828D, IHS684. (Part No: 353852R1)$29.95 [Show Picture]

Thermostat - With gasket. 160 Degree long neck thermostat. For H, HV, M, MD, MDV, MTA, MV, O4, O6, Super H, Super HV, Super M, Super MD, Super W6, W4, W6, W9, 300, 350 gas, 400, 450, 560 Diesel, 656 Diesel, 660 Diesel, 706 Diesel. (Part No: R1852)$33.95 [Show Picture]

Water Block Drain Plug, Winged - Plug 3 8" pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas Dsl), serviceable for Cub, Cub LoBoy. (Part No: 45314DC)$11.18 [Show Picture]

Water Pump Bearing - Ball bearing for water pumps used on tractors: H, Super H, 4, Super W4, 300, 350. 2 used per pump, replaces ST225. For 300, 350, 4, H, Super H, Super W4 (Part No: ST225B)$16.90 [Show Picture]

 
Decals and Emblems
Hood Emblem - For Super H, Super HV, Super M, Super MTA, Super W4, Super W6, W6TA, Super W9, WD9. Hood Emblem 'IH' is 2-1 2" x 2-3 4". (Part No: 357650R1)$10.50 [Show Picture]

Tool Box Decal - For models H, M, MD, Super H, Super M, Super MD, Super MTA. (Part No: R0678)$7.76 [Show Picture]

 
Drive Train
Constant Mesh Gear - For models H, HV, Super H, Super HV, W4. (Part No: 357459R2)$115.56 [Show Picture]

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Part No: 53717DA)$11.20 [Show Picture]

Seal, Rear Axle - One 2-1 2"dia. Seal. For models 300, 330, 340, 350, 460, H, HV, Super H, Super HV. (Part No: 377786R1)$14.44 [Show Picture]

 
Electrical System
Coil, Original, 12 Volt - OEM style coil. For models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353875R91)$54.95 [Show Picture]

Coil, Original, 6 Volt - OEM style coil. For models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353874R91)$54.95 [Show Picture]

Condenser - Services IH distributors 1951-1962 also services J4 magnetos. For models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Part No: 353903R1)$6.37 [Show Picture]

Distributor Cap - 4 Cylinder Clip Type Cap For Delco Distributors: replaces 811735 Delco and 1750411M1. For models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Part No: 1750411M91)$9.60 [Show Picture]

Distributor Cap - 2-3 16" high, fits 4 cyl. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Part No: 351693R92)$7.26 [Show Picture]

Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Part No: 353934R11)$28.95 [Show Picture]

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Part No: 353900R11)$16.00 [Show Picture]

Distributor with Electronic Ignition - New and complete distributor FOR USE WITH 6 VOLT POSITIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. (Part No: 107304C91-6V)$449.97 [Show Picture]

Distributor with Electronic Ignition - 12V - New and complete distributor FOR USE WITH 12 VOLT NEGATIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Note: This distributor has a maximum advance of 21 degrees. Some applications require an advance up to 40 degrees. Verify with your service manual this distributor will work for your application. (Part No: 107304C91-12V)$449.97 [Show Picture]

Distributor, New - Original IHC design. For models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. (Part No: R6332)$294.00 [Show Picture]

Distributor, New - New and complete distributor. For Models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. (Part No: 107304C91)$220.00 [Show Picture]

Distributor, Rebuilt - Complete Remanufactured distributor for tractors with IH distributors. For models Cub, A, B, C, Super A, H, M, Super H, W6, W9, Super W6, 100, 130, 200, 240, 300, 400, 404, 450, 504. A refundable $100.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1197003)$215.00 [Show Picture]

Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Part No: 1442P6)$89.48 [Show Picture]

Electronic Ignition Conversion Kit - Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve ground system only. (FOR NEGATIVE GROUND Order Part #1442)Use with distributor #357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Part No: 1442P12)$89.48 [Show Picture]

Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Part No: 1442)$81.11 [Show Picture]

Electronic Ignition Conversion Kit - 12v Negative Ground - For Tractor Models: A, AV, Super A & AV, B, BN, C Super C, H, HV, Super H & HV, M, MV, Super M & MTA, Super MD & MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system only. Distributors with clip type cap. (Part No: 1142)$81.11 [Show Picture]

Electronic Ignition Conversion Kit - 12v Positive Ground - For Tractor Models: A, AV, Super A & AV, B, BN, C Super C, H, HV, Super H & HV, M, MV, Super M & MTA, Super MD & MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system only. (Part No: 1142P12)$89.48 [Show Picture]

Electronic Ignition Conversion Kit, 6v Positive Ground - For Tractor Models: A, AV, Super A & AV, B, BN, C Super C, H, HV, Super H & HV, M, MV, Super M & MTA, Super MD & MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368 with clip type cap. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 6 volt positive ground system only. (Part No: 1142P6)$89.48 [Show Picture]

Fuse Housing - Reproduction of original Fuse Housing, with fuse and lead wires with cloth covered laquered wire and cotton braid. For models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. (Part No: 354232R91)$26.00

Generator, 6 Volt, Remanufactured - 6 volt, 25 amp, Delco Fits Models: 200 1.75" SHAFT, 400 501-13673 GAS, A, A1 with BATTERY, AV with BATTERY, AV1 with BATTERY, B, BN, C, (Cub prior to SN 221292 and Cub Lo-Boy prior to SN 16397 - both with 1.75" long shaft) H, HV, M, MV, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MTA GAS, TD6 1955-56, TD9 1955-56, W4, W6, W6TA. Refundable $25.00 core charge will be added to your order after the order has been received and will not show on your reciept. (Part No: 356936R91)$233.37 [Show Picture]

Ignition Switch - 2 terminal. For the following Models using a distributor: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, (140 6 volt), 200, 230. NOT like original. (Part No: 62801DC)$10.44

Ignition Tune Up Kit - For IH Distributor-NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Plugs, Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: IHTK1)$29.56 [Show Picture]

Ignition Tune Up Kit, Basic - Fits 4 cylinder gas engines with battery ignition 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Part No: ATK5BIR)$21.28 [Show Picture]

Ignition Tune Up Kit, Basic, Delco Clip Held Cap - Ignition kit For Delco ONLY distributor with CLIP held cap. Contains points, condenser, rotor, and proper point gap gauge. For models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Part No: ATK1DCR)$11.98 [Show Picture]

Ignition Tune Up Kit, Comprehensive - For models A, AV, B, BN, C, Super A, Super AV, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, H, HV, 4, 444, Super H, Super HV, Super W4, 300, 350, M, 6, Super M, Super MTA, Super W6, W6-TA, 400, 450. All with IH Distributor, not for Delco Distributor. Kit contains spark plugs, points, condenser, rotor, gap gauge, (IHTK1) distributor cap (351693R92) and set of universal plug wires (CPN12259). NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: IHTUNEKIT)$46.31 [Show Picture]

Ignition Tune Up Kit, Delco Clip Held Cap - FOR DELCO DISTRIBUTOR WITH CLIP-HELD CAP. 4 Cylinder kit includes spark plugs, points, condenser, and rotor. For models with clip held Type Delco Distributor Caps. For models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Part No: MFITK10)$23.56 [Show Picture]

Magneto Coil Cover - For models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 47449DAY)$27.29 [Show Picture]

Magneto Distributor Cap, H4 Magneto - For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 47413DYC)$19.64 [Show Picture]

Magneto Point Set - For J-4 Magneto only. (Part No: 353172R1)$4.98 [Show Picture]

Magneto Point Set, F-4 - For models F-4 type magneto only. Used on A, B, C, H, HV, M, MC, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 340, 350, 400, 450. (Part No: 353173R1)$20.29 [Show Picture]

Magneto Rebuild Kit, H4 - Magneto Rebuild Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. Includes condenser, winding coil, points, rotor, cap, coil cover, gear and gasket. (Part No: H4-KIT)$149.91 [Show Picture]

Magneto Tune-up Kit For H4 - Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Part No: 21A10R)$21.16 [Show Picture]

Magneto or Distributor Drive Shaft - Verify part number before ordering. For models (300, 350, 400, 450 all not used with hydra touch system), (H, HV SN# 268224 and up), (M, MD, MDV, MV all SN# 148867 and up), Super H, Super HV, (Super M, Super MTA not used with hydra lift, attached with engine driven pump). (Part No: 352079R1)$90.17 [Show Picture]

Magneto, Rebuilt - H-4 magneto with CLOCKWISE Rotation (as viewed from Drivers seat). For models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Right hand flange mount. (Part No: R1196807)$493.41 [Show Picture]

Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: 353896R1)$4.20 [Show Picture]

Spark Plug - For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. Price shown is for EACH, shipped in lots of 4. Enter '4' in QTY box. Replaces OEM 360942R1. (Part No: AL386)$3.24 [Show Picture]

Spark Plug Wire Set, Custom - Delco Distributor Only. For models Cub, A, Super A, B, BN, C, Super C, H, Super H, M, MTA, 300, 350, 400, 450. (Part No: S.67475)$19.98 [Show Picture]

Starter Switch, Manual - Starter switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A&AV, Super C, H, HV, Super H&HV, Super M&MV, Super W6&WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 Mounting holes, 190 I.D. With 1-3 8 centers. Replaces Delco 1918405, 1932131, and OEM IH 593292C1. (Part No: 1925781)$10.08 [Show Picture]

Starter, 6 Volt, 3 Bolt Mount, New - 3-Bolt mounted for Super H, HV, O4, OS4, I4, W4, Super M, MTA, MV, O6, OS6, I6, W6, W6TA. (Part No: 1108012)$199.95 [Show Picture]

Starter, 6 Volt, 3 Bolt Mount, Rebuilt - 3-Bolt mounted for Super H, HV, O4, OS4, I4, W4, Super M, MTA, MV, O6, OS6, I6, W6, W6TA. REBUILT Starter. 6 Volt. Refundable $60 core charge. (Part No: 1108012-R)$256.56 [Show Picture]

Starting Switch Lever - Starting Switch Lever - Lever, pull rod starting switch. For 100, 130, 140, 200, 230, C, Cub, Cub Lo-Boy, H, HV, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A, WD6. (Part No: 1918322)$11.14 [Show Picture]

Switch, Ignition - For Distributor Ignitions, 2 terminal switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230 (Part No: R2720)$39.90 [Show Picture]

Switch, Ignition - For Magneto Ignitions. Switch has only 1 terminal (Picture shows 2). For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub (Part No: R2721)$39.90 [Show Picture]

Terminal Clip - Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Part No: 79407H)$15.68 [Show Picture]

Voltage Regulator, 6 Volt, Positive Ground - REPLACES 121578C1, Delco 1118308, 1118780 & 1119575. Fits models: 100, 130, 140, 330, 340, Cub, Cub Lo-Boy, Super A, Super C, H, M, MTA. (Part No: GDR6003)$24.95 [Show Picture]

Wire Harness - Lighting - WIRE HARNESS - Headlights only for 200, 230, HV, MTA, Super H, Super M. 6 or 12 volt systems. (Part No: 358916R91)$48.60

Wire Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For models Super H, HV both (1953). (Part No: 358161R91)$79.47

Wire Harness, Switch to Rear Light - Reproduction of original with cloth covered laquered wire and cotton braid. For models Super H, HV both (1953). (Part No: 358991R91)$40.50

Wiring Harness, Main - Reproduction of original with cloth covered laquered wire and cotton braid. For model Super H late from 1953-1954. (Part No: 359769R91)$75.52

 
Engine Bearings
Cam Bearing Set - Camshaft bearing kit, 3 bearings. Induvidual bearings not available. For C152 CID 4 cylinder engine in tractors H & HV O4, OS4, W4. For 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4 (Part No: CBK-H152)$40.49 [Show Picture]

Main Bearing Set - .010", For models 300, 350, (H SN# 391358 and up), (HV SN# 391358 and up), (O4 SN# 33340 and up), (OS4 SN# 33340 and up), Super H, Super HV, Super W4, (W4 SN# 33340). (Part No: MBK164-010)$91.76 [Show Picture]

Main Bearing Set - .020", For models 300, 350, (H SN# 391358 and up), (HV SN# 391358 and up), (O4 SN# 33340 and up), (OS4 SN# 33340 and up), Super H, Super HV, Super W4, (W4 SN# 33340). (Part No: MBK164-020)$181.85 [Show Picture]

Main Bearing Set - Main Bearing Set (Std.) H & HV - (both with SN# 391358 & up). Also C152 GAS on O4, OS4 & W4-(all with SN# 33340 & up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. (Part No: MBK164)$91.76 [Show Picture]

Rod Bearing Set - .020". For models 300, 350, (H SN# 391358 and up), (HV SN# 391358), (O4 SN# 33340 and up), (OS4 SN# 33340 and up), Super H, Super HV, Super W4, (W4 SN# 33340 and up). (Part No: CRK164-020)$53.91 [Show Picture]

Rod Bearing Set - Rod Bearing Set(Std.) If other than Std. specify size of;(.010 or .020)in "comments" when ordering. Fits the following: C152 GAS engine on H & HV - (both with SN# 391358 & up). Also C152 GAS on O4, OS4 & W4-(all with SN# 33340 & up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. (Part No: CRK164)$51.38

 
Engine Gaskets
Complete Gasket Set - Complete Overhaul Gasket Set with crankshaft seals. For H, HV, O4, OS4, W4, Super H, Super HV, Super W4 (Part No: GK7509S)$151.20 [Show Picture]

Crankshaft Seal Front - Fits, 152 CID, 164 CID, 169 CID, 175 CID 4 cylinder gas engines: Models, 300, 350, H SN# <106970, H SN-106908-391357, H SN- 391358>, HV SN# <106970, HV SN# -106908-391357, HV SN- 391358>, O4 SN# <33339, O4 SN# 33340>, OS4 SN# <33339, Super H, Super HV, Super W4, W4 SN# <33339, W4 SN# 33340> (Part No: 360692R91)$25.75

Crankshaft Seal Rear - Fits, 152 CID, 164 CID, 169 CID, 175 CID gas 4 cylinder engines: Models, 300, 350, H SN- 106908-391357, H SN- 391358>, HV SN# <106970, HV SN- 106908-391357, HV SN- 391358>, O4 SN# <33339, O4 SN# 33340>, OS4 SN# <33339, OS4 SN# 33340>, Super H, Super HV, Super W4, W4 SN# <33339, W4 SN# 33340>. ** Sold in Multiples of 2, priced each. (Part No: 45014D)$6.11

Full Gasket Set - With Overbore Sleeves Less Timing Cover Seal For Super H, Super HV, Super W4 with C164 Gas Engine (Part No: FS3104)$115.91

Gasket, Water Header - For models 300, 350, H, Super H, Super HV. (Part No: 45266DA)$4.27

Head Gasket Set - For 152 CID 4 cylinder gas in: H, HV, O4, OS4, Super H, Super HV, Super W4, W4 (Part No: VGK7509S)$98.64

Manifold Gasket Set - Manifold gasket set, contains two 1342802C1 gaskets. Used with manifolds 8033DCX and 352536R21. For models 300, 350, H, HV, O4, OS4, Super H, Super HV, W4 (Part No: MS8774B)$11.82 [Show Picture]

Oil Pan Gasket - OIL PAN GASKET For tractors with 152 CID Gas engines in models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4 (Part No: 45267DA)$15.00

 
Engine Overhaul Kits
Basic Engine Overhaul Kit, Less Bearings - Made by TISCO. Basic Engine Kit, Less Bearings (C164 CID Gas & Distillate 4-cylinder engine) For tractors with stepped head pistons. Models: Super H & HV, Super W4. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Part No: BEKH1161A-LCB)$462.11

Basic In-Frame Engine Kit - Made by TISCO. In Frame Engine Kit. (C164 CID Gas & Distillate 4-cylinder engine) For tractors with stepped head pistons. Models: Super H & HV, Super W4. Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Part No: BIFH1161A)$392.86

Engine Overhaul Kit - Made by TISCO. Overhaul Kit For Super H & HV, Super W4 (C164 CID 4-cyl Gas) (Stepped head pistons, Valve length 5-5 16".) Contains Sleeve & Piston Kit (sleeves, pistons & rings, pins & retainers, overbore from 3-1 2" to 3-9 16"). Piston Pin Bushings. Complete Gasket Set. Connecting Rod Bearing Kit. Main Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides and keys). Available with Std., .010 or .020 bearings.. IMPORTANT: Specify Rod and Main bearing sizes, and the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1161A)$670.61

Engine Overhaul Kit - Made by TISCO. Overhaul Kit For Super H & HV, Super W4 (C162 CID 4-cyl Gas) (Stepped head pistons, Valve length 5-15 32".) Contains Sleeve & Piston Kit(sleeves, pistons & rings, pins & retainers, overbore from 3-1 2" to 3-9 16"). Piston Pin Bushings. Complete Gasket Set. Connecting Rod Bearing Kit. Main Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides and keys). Available with Std., .010 or .020 bearings.. IMPORTANT: Specify Rod and Main bearing sizes, and the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1161B)$716.69

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C164 CID Distillate 4-cylinder engine) For tractors with stepped head pistons. Models: Super H & HV, Super W4. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1161-LCB)$627.32

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C164 CID Gas 4-cyl eng) For tractors with stepped head pistons-valve length 5-5 16. Models: Super H & HV, Super W4. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves(50706DA & 50707DA), valve keys, guides & springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1161A-LCB)$602.28 [Show Picture]

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C164 CID Gas 4-cyl eng) For tractors with stepped head pistons-valve length 5-15 32. Models: Super H & HV, Super W4. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves(362534R1 & 362535R1), valve keys, guides & springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1161B-LCB)$641.10

In-Frame Overhaul Kit - 3 9 16 Overbore For Super H, Super HV, Super W4 with C164 Gas Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: R3380-IFK)$703.42

Overhaul Kit - 3 9 16 Overbore For Super H, Super HV, Super W4 with C164 Gas Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R3380-OHK)$729.57

Valve Overhaul Kit - Made by TISCO. Fits Super H, HV, Super W4, (4 cyl C164 cid). Kit Includes Valves, Valve springs, Valve Keys, Valve Guides. (Part No: VOKH164A)$169.29

Valve Overhaul kit, C152 Gas Engine - Made by TISCO. Fits H, HV, SN# 106908 & up, Super H, HV, Super, W4, 300, 350, (4 cyl gas C152, C164, C169, C175). Kit includes Valves(5-15 32 Length), Valve Springs (For Non-Roto exhaust valve), Valve Keys, Valve Guides. (Part No: VOKH152C)$218.39 [Show Picture]

Valve overhaul Kit - Made by TISCO. Fits Super H, HV, Super W4(4cyl gas valve length 5-5 16). Kit includes Valves, Valve springs, Valve Keys, Valve Guides. (Part No: VOKH164B)$117.76

 
Engine Parts
Camshaft Timing Gear - 48 teeth. For models (H, HV with C-152 engine), (Super H, Super HV with C-164), (300 with C-169). (Part No: 6664DB)$114.28 [Show Picture]

Connecting Rod Bolt Lock Tab - .420" bolt hole diameter. For models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350 gas or LP. (Part No: 47499DB)$3.99 [Show Picture]

Cylinder Head Service Kit - Contains Springs, Guides and valve lock. Cylinder HEAD Service KIT For 300, 350, H, HV, Super H, Super HV, Super W4 (Part No: VSKH152C)$67.23

Cylinder Head Stud - 7 16 inch x 6 1 8 inch. For gas and LP Models: H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350. (Part No: 48939DA)$12.75 [Show Picture]

Hand Starting Crank - For models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450. Hand Starting Crank. Less Spinner. (Part No: 51544DBX)$69.93 [Show Picture]

Ring Gear Flywheel - For models H, Super H, Super W4, 300, 330, 340, 350. This flywheel has 104 teeth, 13.165 inches O.D., 12 inches I.D., .550 inches wide (Part No: 45638DB)$62.98 [Show Picture]

Timing Gear, Crankshaft - 24 teeth. For models (H, HV with C-152 engine), (Super H, Super HV with C-164 engine), (300 with C-169 engine). (Part No: 43706D)$74.95 [Show Picture]

Valve Exhaust - Exhaust Valve, length 5-5 16. For models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum Order is 4. (Part No: 50707DA)$17.90 [Show Picture]

Valve Guide Set - Eight per package, enough for 1 engine. For models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Part No: 8049DR)$34.02

Valve Keys - ** Enter quantity of 1. Priced per set of 16. ** For models 100, 130, 140, 200, 22, 230, 240, 300, (330, 340 SN# less than 100500), 350, 62, 76, 81, A, A1, AV, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super C, Super H, Super HV, Super W4, (U2, U2A SN# less than 22113), W4. (Part No: 42026D)$8.00

Valve Service Kit - Cylinder HEAD Service KIT For Super H, Super HV, Super W4. Contains: springs, guides, locks, (no valves). (Part No: VSKH164A)$67.65

Valve Set, Exhaust - Set of 4 Exhaust Valves For tractors with flat head pistons. Models: H & HV, O4, OS4, W4, Super H, Super HV, Super W4 (Part No: 57697D)$54.60 [Show Picture]

Valve Set, Intake - Set of 4 Intake Valves For tractors with flat head pistons. Models: H & HV, O4, OS4, W4, Super H, Super HV, Super W4 (Part No: 57696D)$50.81 [Show Picture]

Valve Springs - Quantity of eight. For models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Part No: 358197R1)$37.80 [Show Picture]

Valve, Intake - Intake Valve - GAS. Length 5-5 16. For models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum Order is 4. (Part No: 50706DA)$17.36 [Show Picture]

 
Engine Pistons and Sleeves
Pin Bushing - Piston pin bushing, 4 used per engine. For C152 CID 4 cylinder engine in tractors H, HV, O4, OS4, W4. For H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Minimum order qty. is 4. Order will be increased to multiples of 4. (Part No: 25998H)$15.80

Piston Sleeve - 3-1 2" to 3-9 16" overbore. For models Super H, Super HV, Super W4. (Part No: SD252)$64.43

Piston, 4 Ring, Stepped Head - Single piston, 1.108" Piston pin dia. For models Super H, Super HV, Super W4. (Part No: PA251)$69.71

Sleeve & Piston Kit - For Super H & HV, Super W4 using C164 gas engine. Kit includes (4) Stepped head pistons, rings, liners, pins & retainers. Overbore from 3 1 2" to 3 9 16". (Part No: PK161)$393.04 [Show Picture]

 
Engine Rings
Piston Ring Set - 3 9/16 Bore - Ring set for 4 pistons, 1 used per engine. For C164 CID 4 cylinder engine. Contains 3 compression 3 32 and 1 oil at 1 4 for each cylinder. For Overbore Super H, Super HV, Super W4. (Part No: PRS161)$97.23

 
Exhaust System
Exhaust Pipe - Short threaded pipe screws into manifold. 10.5 inches lone, 2 3 8 inch outside diameter. For 300, 350, H, Super H, Super W4, W4; all GAS engines. (Part No: 62476D)$18.76

Exhaust Stack, Chrome, Curved - Double wall. 2 3 8 inlet I.D., 27 inches overall length, 3 1 2 inches O.D.. For models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Part No: R4451)$128.99 [Show Picture]

Exhaust Stack, Chrome, Straight - Double wall, 2 3 8 inlet, 3 1 2 outlet, 24 overall length. For models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Part No: R4450)$109.15 [Show Picture]

Manifold - Heavy duty intake exhaust manifold comes with short straight pipe for vertical exhaust that screws into manifold. For 300, 350, H, Super H, Super W4, W4; all GAS engines. Includes gaskets. (Part No: 8033DCX)$157.92 [Show Picture]

Muffler - Vertical muffler for tractors. 6" round body replaces oval body mufflers. Inlet I.D. 2-3 8, Outlet O.D. 2-1 2, total length 29, diameter 6" round body. For gas tractor models: H & Super H, M & MV Super M & Super MTA, W4 & Super W4, W6 & Super W6, W6TA, (300 & 350 with C-175 gas), (400 & 450 with C-281 gas or D-281 diesel), (460 & 606 with C221 gas or D-236 diesel), (560 with c-263 gas or D-282 diesel). (Part No: 403551R1)$26.28 [Show Picture]

Muffler Clamp With Hardware - Muffler clamp with hardware. For models 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, 706, H, HV, M, MD, Super H, Super HV, Super M, Super MD, Super MTA, Super W6, W4, W6, WD6. (Part No: 350602R1)$30.30 [Show Picture]

Muffler Oval - Muffler - Vertical muffler for tractors. 6".Oval body replaces oval body mufflers. Inlet I.D. 2-3 8, Outlet O.D. 2-1 2, total length 29, diameter 6" round body. For gas tractor models: H & Super H, M & MV Super M & Super MTA, W4 & Super W4, W6 & Super W6, W6TA, (300 & 350 with C-175 gas), (400 & 450 with C-281 gas or D-281 diesel), (460 & 606 with C221 gas or D-236 diesel), (560 with c-263 gas or D-282 diesel). (Part No: 403551R1-OVAL)$77.58 [Show Picture]

Muffler, Vertical - For models H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Vertical, 5 1 2 inch Round, 2 3 8 inch inlet I.D., 2 1 2 inch outlet O.D., 29 inch overall length. (Part No: 350600R95)$40.84 [Show Picture]

Vertical Exhaust Muffler - Stainless Muffler also replaces 355869R1, 350600R95. For models H, HV, I4, Super H, Super HV, W4, Super W4. (Part No: 51070D)$117.50

 
Fuel System / Air Intake
Air Cleaner Cap - Old style dome shape. For models H, Super H, W4, 300, 350. Replaces 353019R92. Specify in comments whether you want it to slide over or into the pipe. (Part No: 355935R91)$31.50

Air Cleaner Cap - Newer style mushroom shape. For models H, Super H, W4, 300, 330, 340, 350, 404, 424, 444, 504 Gas. air Cleaner Cap 2" I.D. (Part No: 51435DBX)$42.15 [Show Picture]

Carburetor Float - Float, For updraft International carburetors with throat size 1-1 4 or 1-3 8. Dimensions: 2 3 16L x 1 3 16H O.D. 3 1 2. For 2606, 2706, 300, 350, 400, 450, 460, 560, 600, 606, 650, 660, 706, M, MV, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6, W9, WR9, WR9S (Part No: 47398DX)$22.50 [Show Picture]

Carburetor Kit, Basic - Kit for IHC 406804R91, 361525R92, 363741R93, 367258R92, 380956T96, 381984R95, 386424R96, 388297R94, 372723R92, 379813R95, 396197R93, 539575R91, 388425R96, 533622R91, 358065R91, 358554R91, 356948R92, 357231R92 carbs on 2544, 300, 350, 460, 544, 560, 656, 660, 706, 756, 766, 806, Super H, Super M, Super W-4. (Part No: IH103)$22.50 [Show Picture]

Carburetor, Rebuilt - Fits Super H, HV - replacement for OEM 358065R91. Add $100.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1410-CARB)$147.39

Fuel Cap - For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1 2 inches tall, Triple Baffle Style. (Part No: R3654)$30.60 [Show Picture]

Fuel Cap - 1 15 16 inch overall outside diameter fits many: 240, 300, 350, 400, 450, 600, 650, H, HV, M, MD, MDV, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super W6, Super WD6, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 40756D)$26.82 [Show Picture]

Fuel Cap - Black - (Vented) - Black Fuel Cap. REPLACES : 361910R91, 538063R1, 224839C91, 224839C92. Fits MOST: A, C, Cub, Cub Lo-Boy, Cub 185-Lo-Boy, H, M, MD, Super A, Super C, Super H, Super M, Super W4, Super W6, W6, W9, 100, 130, 140, 184, 200, 230, 300, 330, 340, 350, 400, 403, 404, 424, 444, 450, 460, 503, 504, 544, 560, 606, 615, 656, 706, 715, 756, 766, 806, 815, 826, 856, 915, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1640, 1660, 1670, 1680, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 4166, 4186. Cap fits neck inside diameter of 1 7 8 inches using 2 locking tabs. (Part No: 23995DC)$7.10 [Show Picture]

Fuel Cap, Chrome, Unvented - Fits MOST of the following GAS and Diesel tractors: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, 04, 06, W4, W6, Super W4, Super W6, W9, 100, 130, 140, 4156, 4166, 4168. Cap fits neck inside diameter of 1 7 8 inches using 2 locking tabs. (Part No: 23995DC-CHROME)$7.64 [Show Picture]

Fuel Cap, Top Vented - 2-11 16" I.D., 1.500" height (including splash guard) and 1.118" height. Says "Buy Clean Fuel Keep it Clean". For models A, AV, B, BN, C, Cub, Cub Lo-Boy (-(WILL NOT FIT 154, 184, 185)-), F12, F14, F20, F30, H, HV, I4, I6, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD18A, TD20, TD6, TD9. (Part No: 12770D)$9.95 [Show Picture]

Fuel Cap, Vented - For MOST Models: A, Super A, B, C, Super C, H, Super H, M, Super M, Cub, 100, 130, 200, 230, 300, 350, 400, 450. Says Buy Clean Fuel . Cap fits neck inside diameter of 1 7 8 inches using 2 locking tabs. Replaces IHS226, AR369R, AD709R, AH83351, B824, 7A824, 161945A, 30-3049558. (Part No: 23995DA)$9.95 [Show Picture]

Gas Line With FTG - Buna-N flex gas line. For models 300, 350, 400, H, M, Super H, Super M. Line has 5 16 Inverted Flare Fittings. Additional hardware may be required. (Part No: FLM16)$23.93 [Show Picture]

Governor Control Sector - Governor control sector with pivot pin for tractors:H & HV, Super H & Super HV, M & MV, Super M & Super MV. (Part No: 51351DBXA)$72.33 [Show Picture]

Pre-Cleaner Assembly - Complete, glass dust bowl assembly, 2" I.D. base, just like the original. For models H, Super H, HV, I4, O4, OS4, W4, Super W4, 300, 350. (Part No: 59095D)$92.95 [Show Picture]

Pre-Cleaner Bowl - Glass bowl for pre-cleaner assembly 59095D, 59096D. (Just like the original). Tractors: H, Super H, HV, I4, O4, OS4, W4, Super W4, 300, 350, M, MD, Super M, MTA, W6, WD6, I6, O6, ID6, OS6, ODS6, Super WD6, 400, W400, 450, W450. (Part No: 54082D)$25.30

 
Gauges
Amp Gauge - D-O-C Style - with IH Logo For Super A, Super C, H, Super H, M, Super M, Super MTA, Cub (From 1955), W4, W6, 200, 230, 240, 300, 350, 400, 450. Replaces 393334R91, 378424R91, 360053R92, IHS395. (Part No: 360053R91)$16.50 [Show Picture]

Amp gauge - Gauge, ammeter has 20-0-20 range. Original style with IH logo. Fits 2" dia. hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418. (Part No: 354473R91)$26.50 [Show Picture]

Oil Pressure Gauge - Zone Style - with IH Logo with Studs - Does not include bracket. For H, Super H, M, Super M, Super MTA, W-4, Super W4, W-6, Super W6, W-9, Super W9 (From 1947) (Part No: R2738)$44.25 [Show Picture]

 
Hitch / Drawbar
3 Point Conversion Kit - For use with ONE hydraulic cylinder.For INTERNATIONAL HARVESTER Models: H, M, MTA, Super H, Super M, Super MTA, MD, 300, 340, 350, 400, 460, and 504 - Cat. I II (Requires one 3" x 8" hydraulic cylinder.) *Hydraulic cylinders and hoses are not included. Weight is 237 Lbs. Additional shipping charges apply. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1106)$977.81 [Show Picture]

Draw Bar Roller - For models H, Super H, M, Super M, 300, 330. (Part No: R0910)$48.87 [Show Picture]

Drawbar Strap - For models H, Super H, M, Super M, 300, 350. (Part No: 45184DA)$62.64 [Show Picture]

Swinging Drawbar Pin - For models H, Super H, M, Super M, 300, 330, 340, 350, 400, 450, 460, 560, 660. (Part No: FOH450)$33.63 [Show Picture]

 
Hydraulic System
Hydraulic Dipstick - Mounts inside the hydraulic pump breather fill pipe, 11.80" long. For models H, HV, M, MV, MD, MDV, Super H, Super HV, Super M, Super MV, Super MD, Super MDV, 140 Combine and 120 Windrower, all equipped with lift all countershaft driven hydraulic pump. (Part No: 15158EX)$26.88 [Show Picture]

Hydraulic Pump - For models Super H, 300, 350. (Part No: 128191C91)$917.31 [Show Picture]

 
Lights
Headlamp Assembly, Tear-Drop- 6Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5 inches in diameter. Price is for one headlamp assembly. Does not include mounting bracket. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W4, Super W6, Super A, W4, W6, W9, WD6, WD9. Verify your configuration (Tear-Drop vs. Flat-Back) before ordering. (Part No: 45640DB)$42.90 [Show Picture]

Headlight Lens - Replacement Glass Lens is 4.75 inch outside diameter for IH (45640DB) Headlight Assemblies. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, W4, W6, W9, WD6, WD9. (Part No: GC200)$13.66 [Show Picture]

Headlight Lens Gasket - Gasket, 4 5 8 outside diameter for lens in sealed beam units 358890R92. For models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: 358892R91)$6.74 [Show Picture]

Headlight Reflector - 4 inch - This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: S.02377)$11.52 [Show Picture]

Headlight Support Bracket - For H, Super H, M, Super M, Super MTA. Headlight Support Bracket. (4156R) (Part No: 51675DC)$74.95 [Show Picture]

Headlight Trim Ring - Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 53525DA)$19.00 [Show Picture]

Knob - Knob for combination rear light and tail light switch(used only with switch body with 15 32 shaft). For models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Part No: 359773R91)$11.00 [Show Picture]

Light Clamp - Clamp, lamp assembly for tractors. For models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W6, Super A, W4, W6, W9, WD6, WD9. (Part No: 350920R1)$10.64 [Show Picture]

Light Switch Knob - Old style for rotary light switches. For models A, AV, B, BN, C, H, HV, M, MD, MV, MDV, W4, W6, W9, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, I9, ID6, ID9, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MV, Super MDV, Super MTA, Super W4, Super W6, Super W6TA, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, Cub. (Part No: 57313D)$10.00 [Show Picture]

Light Switch, 12 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5362)$46.04 [Show Picture]

Light Switch, 12 Volt - 3 position with Old style knob, with regulator only. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5364)$45.35 [Show Picture]

Light Switch, 12 Volt - 4 position with new style knob. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5366)$46.04 [Show Picture]

Light Switch, 12 Volt - 3 position with new style knob. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5368)$46.04

Light Switch, 6 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5361)$46.04 [Show Picture]

Light Switch, 6 Volt - 3 position with Old style knob, with regulator only. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5363)$44.50 [Show Picture]

Light Switch, 6 Volt - 4 position with new style knob. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5365)$46.04 [Show Picture]

Light Switch, 6 Volt - 3 position with new style knob. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5367)$46.04

Rear Combo Light - 6 Volt Rear Combo Light Assembly with Red Jewel Light with rotary switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. Replaces 355914R91. (Part No: 355911R91)$62.05 [Show Picture]

Sealed Beam Bulb, Red & White - 4.5" dia. For models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. (Part No: 371461R92)$26.98 [Show Picture]

Switch, Worklight, with Knob - For models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. Replaces 359682R91. (Part No: 375653R92)$19.56 [Show Picture]

 
Oil System
Oil Filler Cap - For models 300, 350, 400, 450, H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MTA. (Part No: 4819DX)$6.89 [Show Picture]

Oil Filter - Oil filter element, cartridge type with gasket. Filter is 3.5 inches diameter with overall length of 5.5 inches. For gas engines: C113, C123, C135, C146, C152, C164, C169, C175. For 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 350, 404, 424, 444, 504, A, AV, B, BN, C, H, HV, Super AV, Super C, Super H, Super HV, Super W4, Super A, W4. (Part No: 376374R91)$9.66 [Show Picture]

Oil Filters, Tri Pack - Package of three oil filter elements, cartridge type with gasket. Filter is 3.5 inches diameter with overall length of 5.5 inches. For gas engines: C113, C123, C135, C146, C152, C164, C169, C175. For models 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 350, 404, 424, 444, 504, A, AV, B, BN, C, H, HV, Super AV, Super C, Super H, Super HV, Super W4, Super A, W4. (Part No: 376374R91TRIPAC)$22.46 [Show Picture]

 
PTO / Driveline
PTO Safety Shield - For H after SN# 118000, HV, Super H, Super HV. PTO Safety Shield. (Part No: 66387DAXA)$65.73 [Show Picture]

PTO Shaft Guard with Clamp - For A, B, Super A, Super AV, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 504, 544, 606 and with transmission driven type tractors: 330, 330, 350, 400, 450. PTO safety guard. (Part No: 51484DX)$12.81 [Show Picture]

 
Seats
Seat Hinge Pin - Pin, hinge for tilt back seat bracket. Pin is 7 inches long and 3 8 inch diameter. Tractors: C, Super C, H & HV, Super H & HV~ M & MD, Super M & MTA~ Super W6 & W6TA~ 200, 230, 300, 340, 350, 400, 450, 560, 660. For 200, 230, 300, 340, 350, 400, 450, 460, 560, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super HV, Super M, Super MD, Super W6, W6TA. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. (Part No: 356892R2)$22.42 [Show Picture]

Seat Shock, Mid Mount - For Models: C, Super C, Super H, and Super H all SN# 19234 and up; M, MD, MDV, Super MDV, Super MD, 200, 230, 300, 350, 400, 450, 460, 560. Shock Absorber for Mid Mounted shock is 7 1 4 inchs from center-to-center compressed length. Replaces IHS347, 361033R91. (Part No: 351750R93)$39.95 [Show Picture]

Seat Spring - Cone Shape SPRING Measures 13 inches tall and 8.5 inches at base. For models 200, 230, 300, 350, 400, 450, 460, 560, 600, 650, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super M, Super MTA. Replaces IHS030. (Part No: 354670R2)$27.95 [Show Picture]

 
Sheet Metal / Body Parts
Battery Box - For H, Super H, HV, W4. Battery Box with Cover. Replaces OEM# 51686DBX. Outside dimensions: 9 3 8 inches in length, 7 11 16 inches wide, 9 inches tall. (Part No: 51680DB)$88.50

Battery Box - For models Super H, Super HV. Battery Box, Restoration Quality. Less lid. (Part No: 359500R91)$119.25 [Show Picture]

Battery Box - For Super H, Super M, Super MTA. Battery box, under seat location - not exactly like original. Universal mount. Less Lid. (Part No: 358693R91)$90.45 [Show Picture]

Battery Box Lid - For H, Super H, HV, W4. Battery Box Cover. (Part No: 51686DBX)$39.50

Battery Hold Down Rubber - 3 4" tall, inserts into the retainers in the battery box lid. For models Cub, Cub Lo-Boy, A, AV, B, (BN, C 51690D), AI, H, HV, M, MV, MD, MDV, W6, W9, WD6, Super A, Super C, Super H, Super HV, Super M, Super MTA, Super W6, 100, 130, 140, 200, 230, 600, 650. (Part No: R5103)$6.00

Fender - For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450, and will also work (though not exactly original) for: 340, 460, 504, 560. This fender fits either left or right side. You must order two for a complete set. An additional $20.00 shipping charge will be added for each fender due to weight and or size. Mounting Plate and Spacer sold seperately. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 51500DB)$132.00 [Show Picture]

Fender Extension Mounting Kit - One kit used per tractor. For models H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDTA, O4, Super W4, W6, WD6, Super W6, Super W6TA, W9, WD9, Super WD9, 100, 130, 140, 400, 230, 240, 300, 330, 340, 350, 400, 450. Fender mounting Kit includes 2 fender flat brackets with (34 Pieces) all mounting hardware. ADD $5.00 to shipping costs due to weight. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. Replaces IHS364. (Part No: 8000072)$58.50 [Show Picture]

Fender Mounting Plate - For Farmall H, Super H, M, Super M, For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450. This fender mounting plate fits either left or right side. You must order two for a complete set 1 tractor. (Part No: 51500PL)$23.41 [Show Picture]

Fender Mounting Spacers - For Farmall H, Super H, M, Super M, For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450. This fender mounting spacer fits either left or right side. Price is for each, Min order QTY is 4. (Part No: 51502D)$2.99

Grill Screen Insert - For H, Super H, HV, Super HV. Grill Screen Insert. (R1554) (Part No: 48963DXA)$35.00 [Show Picture]

Tool Box - Light bar mount, includes decals and brackets. For models H, Super H, M, Super M, Super MTA. (Part No: 999760R91)$112.20 [Show Picture]

 
Steering
Axle - Heavy duty main axle assembly includes bushings. For models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Additonal $45 will be charged For shipping due to weight). IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 7453)$590.68 [Show Picture]

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 11-5 8" Verticle shaft tube. For models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 7465)$193.37 [Show Picture]

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 9-5 8" Verticle shaft tube. For models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 7470)$191.47 [Show Picture]

Front Axle Assembly, Wide, without hubs - For H, Super H, 300, 350. Complete Front Axle without Hubs contains cap screws with lock washer, Steering Bracket Assembly, Rear Saddle Assembly, Front Saddle Assembly, Spindles, and Castlellated nuts. Width on wide axles are adjustable from 60" to 86". ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: 21015)$1316.90

Front Axle Bumper - For H, HV, Super H, Super HV, M, MV. (R3693) (Part No: 12522D)$92.49 [Show Picture]

Oil Seal - Oil seal for bearing kit FW113FS. Tractors H, Super H, M & MD, 4, Super W4, 300, 350. For 2606, 300, 350, 4, 460, 504, 606, H, M, MD, Super H, Super M, Super MD, Super W4 (Part No: 48539DA)$12.50 [Show Picture]

Spindle Bushing - Fits 1.667" dia. Spindles replaces 376099R1 for use with A-71785HD & OEM spindle. **Minimum order Qty is 2, price is for each. (Part No: 358958R2)$10.50 [Show Picture]

Spindle-LH - Fits models H, HV, Super H, Super HV, 300, 350 (Does NOT fit Utility Models). (Part No: 360419R91)$201.26 [Show Picture]

Spindle-RH - Fits models H, HV, Super H, Super HV, 300, 350 (Does NOT fit Utility Models). (Part No: 360420R91)$201.26 [Show Picture]

Steering Shaft - For H, HV, Super H, Super HV, Farmall 300, 350. (Part No: 50047DB)$127.33 [Show Picture]

Steering Universal Joint - For models H, Super H, M, Super M, 300, 350, 400, 450. Steering Universal Joint complete joint with yokes, pins and grease fitting. Not for 'Keyed ' yokes. (Part No: USJ78)$71.79 [Show Picture]

Steering Wheel - 17-5 8" diameter, 3 4" hub, for keyed shaft. 3 Spoke. Super A SN# 356000 & up, C, Super C, H, Super H, M, Super M, MD, W4, Super W4, W6, Super W6, W9, 100, 130, 200, 230, 240 & 300, 350, 400, 450 without Power Steering. Metal Spokes. Replaces IHS328. (Part No: 60070D-OE)$49.50 [Show Picture]

Steering Worm Gear - For H, HV, Super H, Super HV, Farmall 300, 350. This 32 teeth gear mates with the bottom of the steering shaft. Can use 50038DA with 19 teeth also. (Part No: 50038DB)$112.92

Thrust Bearing - For models 684, 685, 685XL, 686, 695, 695XL, 706, 756, 766, 782, 784, 786, 806, 826, 856, 86 SERIES with AXLE PIVOT BALL, NOT PIN), 88 SERIES EARLY with AXLE PIVOT BALL, NOT PIN), 884, 885, 885XL, 886, 895, 895XL, 966, 986, H, HV, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86, M, MTA, Super H, Super HV, Super M. (Part No: 185106C1)$11.49 [Show Picture]

Thrust Bearing, Axle - Standard duty. Fits Schwartz Speeco type front ends. For models 300, 350, (354, 364 last SN# models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last SN# models), H, M, MTA, Super H, Super M. Replaces OEM# 392671M91. (Part No: T163)$21.32

Tie Rod Tube Kit - For a Swartz front end. Kit includes, 1 tie rod tube, 1 plug, 1 ball stud, 2 1 8" cotter pins, 1 dust seal. For models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M (Part No: 22812)$51.65

Upper Front Bolster Pivot Shaft - For H SN# 167994 & up, Super H, 300, 350. Upper Front Bolster Pivot Shaft. (Part No: 69060D)$141.55 [Show Picture]

 
Wheels
Bearing Cone - Inner cone for bearing kit FW113FS. Tractors H, Super H, M & MD, 4, Super W4, 300, 350. For 300, 350, 4, H, M, MD, Super H, Super M, Super MD, Super W4 (Part No: ST2049)$12.20

Bearing Cup - Inner cup for bearing kit FW113FS. Tractors H, Super H, M & MD, 4, Super W4, 300, 350. For 300, 350, 4, H, M, MD, Super H, Super M, Super MD, Super W4 (Part No: ST974)$8.12

Clamp Lock Nut - Wheel Clamp Lock Nut. 7 8-14 thread. Fits front wheel on tractors: H, Super H~ M, Super M~ B275, 300, 350, 400, 450, 460, 560. For 300, 350, 400, 450, 460, 560, B275, H, M, Super H, Super M (Part No: LN10-5)$18.70

Front Wheel Bearing Kit - Complete for 1 wheel. For models H, Super H, M, MD, Super M, Super MD, Super W4, 300, 350. Replaces 5ST2049, ST974, 13321DA, 13417D. (Part No: S67453)$40.08 [Show Picture]

Wheel Bearing Kit, Wide Axle Assembly - For models H, HV, M, MD, MF, SMD, Super H, Super HV, SW, W4, 300, 350, 330. This is a complete front axle kit for one wheel used on wide axle assembly (only). Contains: 14138A(Cone), 14274(Cup), 1779(Cone), 43828D (Gasket), 704083R1(Seal), 48548D(Seal Retainer), 1729(Cup). Inner bearing I.D. is 1.37", O.D. 2.71". Outer bearing I.D. is 0.93", O.D. 2.23", Seal I.D. is 1.74", O.D. 2.83". (Part No: WBKIH4)$29.57 [Show Picture]




PayPal


Customer Service
Monday - Friday
10:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure

  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2014 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.