(800) 853-2651   Cart  View Cart    
Low Prices, Fast Shipping

 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

Harry Ferguson Parts
[ Turn Off Pictures ]
 
Clutch
CLUTCH, PRESSURE PLATE
- Pressure Plate (7 1 4 inch) Diaphram Type. For Case IH models 234, 244, 254, 235. (Part No: S.72822_)
$49.14 [Enlarge Picture]

Clutch Disc
- TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines.For models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Part No: 375701R91)
$41.42 [Enlarge Picture]

PTO Clutch Kit
- Clutch disc kit, for single or dual speed independent PTO using 5 discs and 8 plates. Tractors: Hydro 84, 385, 395, 464, 484, 485, 495, 574 SN# 100001 and up, 84, 585, 595, 674, 684, 684, 685, 695, 784, 885, 2400A SN# 100001, 2500A SN# 100001 and up. For 2400A, 2500A, 385, 395, 464, 484, 485, 495, 574, 584, 585, 595, 634, 674, 685, 695, 784, 885, HYDRO 84. Kit includes, 5 DISCS (401716R2), 8 PLATES (66188C1), 1 O'RING (401723R1), 1 O'RING (401724R1), 6 SPRINGS (66182C1). (Part No: 66193C91)
$101.09 [Enlarge Picture]

 
Cooling System
Fan Belt
- Fan belt fits, 130 GAS, 200 GAS, 230 GAS, C GAS with WATER PUMP, Super A GAS SN# 48000-48499, Super AV GAS SN# 48000-48499, Super C GAS SN# 100001-114645, Super C GAS SN# 114646->. (Part No: 60712D)
$12.86 [Enlarge Picture]

Radiator
- For models Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 200 and 230. NOT FOR EARLY TRACTORS THAT DID NOT HAVE A WATER PUMP. (Part No: 356356R94)
$421.20 [Enlarge Picture]

Radiator
- Core size 22.50" wide, 24.00" high. For models (766 diesel), 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, Hydro 100, Hydro 186. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: 71611C1)
$721.18 [Enlarge Picture]

Radiator
- Core size 25.00" wide, 25.75" high. For models 3388, 3588, 3788, 6388, 6588, 6788. Replaces 121845C3. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: 130814C3)
$933.14 [Enlarge Picture]

 
Decals and Emblems
Decal Set
- For McCormick WD6, 1939-1944. COMPLETE Decal Set. Printed on Vinyl. (Part No: MDWD6)
$29.99 [Enlarge Picture]

Decal Set - For McCormick WD6, 1945-1952. COMPLETE Decal Set. Printed on Vinyl. (Part No: R2438)$36.00

Decal Set - For 200, 230. COMPLETE 9 piece Decal Set. Printed on Vinyl. (Part No: R3597)$23.72

Decal Set - For 240. COMPLETE 11 piece Decal Set. Printed on Vinyl. (Part No: R3598)$25.11

 
Drive Train
Crankshaft - ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** Crankshaft less bearings, order bearings separatly for 6 cylinder D434 & DT436 diesel engines. For 1470, 1480, 1640, 3488, 3588, 3788, 4366, 4386, 5288, 5488, 6588, 6788, 7288, 7488 (Part No: 675669C92)$1861.17

Torque Amplifier
- Remanufactured torque amplifier has 3 direct drive discs and 2 anti-free wheel discs. Does not include driven gear. Remanufactured torque amplifiers are made and inspected to specification. Every part is examined, measured and tested to assure compliance. ** A REFUNDABLE $150 CORE CHARGE IS ADDED TO COST ON THIS ITEM. ** Core return tags are mailed with part. Core credit issued after inspection of returned core. For models 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486. (Part No: 1251698C92)
$701.30 [Enlarge Picture]

Torque Amplifier
- Remanufactured torque amplifier has 3 direct drive discs and 2 anti-free wheel discs. Remanufactured torque amplifiers are made and inspected to specification. Every part is examined, measured and tested to assure compliance. ** A REFUNDABLE $150 CORE CHARGE IS ADDED TO COST ON THIS ITEM. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED ** Core return tags are mailed with part. Core credit issued after inspection of returned core. Fits tractors: 1566, 1568, 1586, 3788, 6788. (Part No: 1251699C92)
$859.19 [Enlarge Picture]

Torque Amplifier
- Remanufactured torque amplifier with nut & belt pulley gear. Remanufactured torque amplifiers are made and inspected to specification. Every part is examined, measured and tested to assure compliance. ** A REFUNDABLE $150 CORE CHARGE WILL BE ADDED TO THIS ITEM. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED.** Core return tags are mailed with part. Core credit issued after inspection of returned core. Fits tractors: 300, 350, 460. (Part No: 363854R93)
$590.60 [Enlarge Picture]

Torque Amplifier
- Remanufactured 'Sprague Type' torque amplifier with nut & belt pulley gear. Remanufactured torque amplifiers are made and inspected to specification. Every part is examined, measured and tested to assure compliance. ** A REFUNDABLE $100 CORE CHARGE IS ADDED TO COST ON THIS ITEM. ** Core return tags are mailed with part. Core credit issued after inspection of returned core. For tractors: 400, 450, 560, 660. (Part No: 363499R94)
$712.80 [Enlarge Picture]

Torque Amplifier
- Remanufactured torque amplifier 'Mechanical' with nut. Remanufactured torque amplifiers are made and inspected to specification. Every part is examined, measured and tested to assure compliance. ** A REFUNDABLE $150 CORE CHARGE IS ADDED TO COST ON THIS ITEM. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. ** Core return tags are mailed with part. Core credit issued after inspection of returned core. Fits tractors: 656, 666, 686, 2756. (Part No: 394814R91)
$557.94 [Enlarge Picture]

Torque Amplifier Elimination Kit
- For models 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 21256, 21456, 2706, 2826, 2856, 3088, 3288, 3688, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986. Refundable $225 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 830431)
$447.73 [Enlarge Picture]

Torque Amplifier, Heavy Duty
- Remanufactured, matched with driven gear (529093R2 51 tooth, 25 degree) reference IH's new number 1277806C91 driven gear NOT included in this assembly. For models 1066, 1086, 1456, 1466, 1468, 1486, 2826, 2856, 3088, 3288, 3688, 756, 766, 786, 826, 856, 886, 966, 986. A refundable $150 core charge will be added to this order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1251698HD-R)
$882.24 [Enlarge Picture]

Torque Amplifier, Heavy Duty
- Remanufactured, match with driven gear (392291R1 51 tooth, 20 degree) NOT included in assembly. 5 year conditional factory warranty. For models 1206, 1256, 2706, 2756, 2826, 2856, 706, 756, 766, 806, 826, 856. A refundable $150 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 392292HD-R)
$884.45 [Enlarge Picture]

Torque Amplifier, Heavy Duty - Match with driven gear 380255R1, 53 tooth, 20 degree NOT included. For models 2706, 2756, 706, 806. ADD $150.00 refundable Core charge. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 380237HD-R)$840.45

 
Electrical System
(Starters, Generators, Coils, Wiring, etc.)
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR)$0.00

Distributor with Electronic Ignition
- New and complete distributor FOR USE WITH 6 VOLT POSITIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. (Part No: 107304C91-6V)
$449.97 [Enlarge Picture]

Distributor with Electronic Ignition - 12V
- New and complete distributor FOR USE WITH 12 VOLT NEGATIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Note: This distributor has a maximum advance of 21 degrees. Some applications require an advance up to 40 degrees. Verify with your service manual this distributor will work for your application. (Part No: 107304C91-12V)
$449.97 [Enlarge Picture]

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground
- The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p n S.66442. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For models (80 with Wisconsin VH4 6 cyl. engine and Autolite dist.), (140 with Wisconsin VR4D 6 cyl. engine and Autolite IAD series dist.) (Part No: 91561)
$103.57 [Enlarge Picture]

Generator
- 6 volt, 35 amp. For models 330 gas, 340 gas, 140 SN# 26800 and below, Cub Lo-Boy SN# 16398-18700, Cub SN# 221293-224400, 240. Refundable $25.00 core charge will be added to orders. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces 1100052, 1100055, 368652R92. (Part No: TG-72)
$266.48 [Enlarge Picture]

Generator, 6 Volt, Remanufactured
- 6 volt, 25 amp, Delco Fits Models: 200 1.75" SHAFT, 400 501-13673 GAS, A, A1 with BATTERY, AV with BATTERY, AV1 with BATTERY, B, BN, C, (Cub prior to SN 221292 and Cub Lo-Boy prior to SN 16397 - both with 1.75" long shaft) H, HV, M, MV, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MTA GAS, TD6 1955-56, TD9 1955-56, W4, W6, W6TA. Refundable $25.00 core charge will be added to your order after the order has been received and will not show on your reciept. (Part No: 356936R91)
$233.37 [Enlarge Picture]

Spark Plug - Extended tip, 14mm thread, 3 4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)$3.64

Spark Plug - Extended tip, 14mm thread, 3 8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)$3.64

Starter - STARTER For 385, 395, 484, 485, 495, 584, 585, 595, 684, 685, 695, 784, 884, 885, 895, 995 (Part No: 537140R96)$159.90

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. (Part No: STARTER)$0.00

Starter - Delco Replaces OEM 1107543, 1107564, 1108657. TYPE :DR 20MT, 9 teeth, CCW rotation, V kW:12.NOTE :C-221 Gas LPG, LPG Engine (YR.59-58). Fits these models: 340 DSL(1962-63), 350 DSL(1956-58), 350 DSL(1957), 3514 DSL(1965-66), 3616 DSL(1965-66), 460 DSL(1958-59), 460 DSL(1962-64), 460 GAS, LPG, (1960-61), 460 GAS, LPG, (1960-64), 460 GAS with LPG, (1958-59), 460HC GAS, LPG, (1960-64), 504 DSL(1961-66), 560 GAS with LPG, (1958), 560 GAS with LPG, (1958-64), 560HC GAS with LPG, (1958-64), 606 DSL(1961-66), 606 GAS, LPG, (1961-64), 656 GAS, LPG, (1965-66), 660 GAS, LPG, (1960-61), 660 GAS with LPG(1958-59), T340 (1960-62), TD340 (1962-64), TD340 (1967), 560 GAS with LPG, (1959-64). Refundable $60 core charge will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. ** $60.00 Core. (Part No: TS-1032)$312.23

Starter, Delco - 12 teeth, clockwise rotation, 12 volt. For models 1000 with diesel, 730, 830, TD18A. **A REFUNDABLE CORE CHARGE OF $90.00 WILL BE ADDED TO THE ORDER***``IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: A21281)$356.38

Starter, Delco - Has 12 teeth, CW rotation, 12 Volt. Fits: 454, 464, 574, 674, 2400A, 2500A. ADD $60 CORE CHARGE. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1108394)$212.63

Wire Harness
- For A, B. COMPLETE Wire Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3716)
$153.90 [Enlarge Picture]

Wire Harness - For Super A with Distributor Ignition. COMPLETE Wire Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. Replaces OEM# 45640DB. (Part No: R3717)$178.20

Wire Harness - For Super A with Magneto Ignition. COMPLETE Wire Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3718)$241.23

Wire Harness
- For C, Super C, 200. COMPLETE Wire Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3719)
$153.90 [Enlarge Picture]

Wire Harness
- For H with Regulator on generator. COMPLETE Wire Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3720)
$202.50 [Enlarge Picture]

Wire Harness
- For H with Regulator Under Fuel Tank. COMPLETE Wire Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R2604)
$202.50 [Enlarge Picture]

Wire Harness - For Super H with Regulator Under Fuel Tank. COMPLETE Wire Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3721)$202.50

Wire Harness
- For Super H with Regulator on Amp Box. COMPLETE Wire Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3722)
$251.10 [Enlarge Picture]

Wire Harness
- For M with Regulator on Generator. COMPLETE Wire Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3724)
$226.80 [Enlarge Picture]

Wiring Harness - For models Super M with Regulator on Generator. COMPLETE Wire Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3725)$259.90

Wiring Harness - For model Super MD with Regulator on Steering Post Box. COMPLETE Wire Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3726)$251.10

Wiring Harness, Complete
- For M with Regulator on Steering Post Box. COMPLETE Wire Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3723)
$234.90 [Enlarge Picture]

 
Engine Bearings
Rod Bearing Set - For Cub Lo-Boy & Cub, For C60 Engine with serial number less than ENG SN# <261717. ** IMPORTANT-- NOTE ROD FORGING NUMBER (251246R3 OR 527457R11) and specify size of: Standard, .002, .010, .020 or.030 in 'Comments' when ordering. (Part No: CRK60)$46.29

 
Engine Overhaul Kits
Basic Engine Overhaul Kit, Less Bearings - Made by TISCO. Basic Engine Kit, Less Bearings (C169 CID Gas 4-cylinder engine) For tractors with stepped head pistons with .875" Piston Pin Diameter. Model 300 To SN# 48048. Models: Super H & HV, Super W4. Kit contains sleeves & piston kit, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. NOTE: Includes piston pin bushings 366883R92 for pin dia.1.109". (Part No: BEKH1167-LCB)$391.18

Basic In-Frame Engine Kit - Made by TISCO. In Frame Engine Kit. For models 300 and 350. (C169 & C175 CID Gas 4-cylinder engines) Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. NOTE: if your piston pin dia. is 1.109" you need to order bushings #366883R92 if .875" order #364913R1. (Part No: BIFH1167)$314.88

Engine Overhaul Kit - For C113CID 4 cyl gas engines overbore 3" to 3-1 8", 3-5 16" O.D sleeve at seal. Kit includes, 4 piston liner kit, 1 main bearing set, 4 rod bearings, 1 gasket overhaul set with seals. For models 130, 140, 22, 230, 240, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super AV, U-2 SN# <22113, U-2A SN# <22113. ***IMPORTANT - SPECIFY PISTON TYPE (STEPPED HEAD OR FLAT HEAD) IN COMMENTS** ALSO, MAIN AND ROD BEARING SIZES. (Part No: OK113)$549.53

Engine Overhaul Kit, Comprehensive, Less Bearings with Flat Head Pistons - Early Serial Number - Made by TISCO. Overhaul Kit, Less Bearings (C248 CID Gas 4-cyl eng). Model M & MV To SN# 278049, O6, OS6, W6, To SN# 35463. (For eng with flat head standard compression piston. Verify Piston Pin Diameter of 1-5 16") Kit Contains sleeves & sleeve seals, pistons & piston rings (overbore from 3-7 8" to 4"), pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENG BEARINGS MUST BE ORDERED SEPARATELY. IMPORTANT: Specify Rod and Main bearing sizes, and the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1151A-LCB)$633.98

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C152 CID Gas 4-cyl eng)For tractors with stepped head high compression pistons-valve length 5-5 16ö. Models: H & HV To SN# 106907, O4, OS4, W4 To SN# 33339. Kit contains sleeves & sleeve seals, pistons & piston rings, pins & retainers, pin bushings, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENG BEARINGS MUST BE ORDERED SEPARATELY. IMPORTANT: Specify Rod and Main bearing sizes, and the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1156A-LCB)$540.26

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul Kit, Less Bearings (C169 & C175 CID Gas 4-cyl eng). Model 300 SN# 48049 & Up with C169 engine and 350 with C175 engine (for eng with stepped head piston, .875 Piston Pin Diameter). Contains sleeve and piston kit, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENG BEARINGS MUST BE ORDERED SEPARATELY. IMPORTANT: Specify Rod and Main bearing sizes, and the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1167A-LCB)$577.58

Major Overhaul Kit - 152 CID 4 cylinder gas engines overbore 3-3 8" to 3-7 16. For models H SN# 391358>, HV SN# 391358>, O4 SN# 33340>, OS4 SN# 33340>, W4 SN# 33340>. Kits include, 4 Piston liner kits, 1 Main bearing set, 4 Conn rod bearings, 4 Piston pin bushing, 1 Front crank seal, 1 Cam bearing set, 1 Gasket overhaul set with rear seal. **IN COMMENT SECTION SPECIFY ROD & MAIN BEARING SIZES, PISTON TYPE (FLAT OR STEPPED HEAD), PIN BUSHING SIZE (.935 OR 1.168)** (Part No: OK214)$726.33

Valve Overhaul kit
- Made by TISCO. Fits M, MV, O6, OS6, W6 For DISTILLATE. Kit includes Valve, Valve Springs, Valve Keys, Valve guides. (Part No: VOKH248)
$208.25 [Enlarge Picture]

Valve Overhaul kit, C152 Distillate Engine - Made by TISCO. Fits H, HV, O4, OS4, W4 (4cyl C152 DISTILLATE engine). Kit includes Valves, Valve Springs(For Non- Roto Exhaust Valve), Valve keys, Valve Guides. (Part No: VOKH152A)$170.30

 
Engine Parts
Cylinder Head, Rebuilt - Comes complete with seats and guides but NOT valves. For models M, W6, Super M all with gas engines and casting # 8060. Add $100.00 core charge to price - this charge is refundable if you send your core to us. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1193622)$678.53

Engine Block
- Engine block, Crank case (with feed pump fitting). For models 444, B275 with BD154 CID Diesel 4-cylinder engine. Also replaces OEM 3040912R21. Call for shipping truck freight quote. Typical shipping would be $150.00 for 325 lbs. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: 3047288R31)
$931.50 [Enlarge Picture]

FLYWHEEL
- NEW flywheel assembly with ring gear. 12" diameter. Tractors: 574, 584, 585, 595, 684, 685, 695, 784, Hydro 84, 3230, 4210. Weight: 88.5 pounds. Additional shipping of $20 will be added due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1808412C92)
$752.38 [Enlarge Picture]

Valve Key, Single Half - ** SINGLE HALF ** VALVE KEY. For models 238, 2424, 2444, 354, 364, 384, 424, 434, 444, B250, B275, B276, B414. ** MINIMUM ORDER QUANTIY IS 8, Priced each half. NOTE: 16 halves required for a complete engine. (Part No: 704443R1)$24.92

Valve Set, Exhaust - Distillate Engine, Set of 4
- Valve length is 5.56" Set of 4 Exhaust Valves for 248 CID DISTILLATE engine. The number on your exhaust valve should read 57699D. (Part No: 57699D)
$120.58 [Enlarge Picture]

Valve Set, Intake, Distillate Engine - Set of 4
- Valve length 5.56" For 248CID DISTILLATE engine. Set of 4 Intake Valves. The number on your intake valve should read 57698D. (Part No: 57698D)
$67.66 [Enlarge Picture]

 
Engine Pistons and Sleeves
Sleeve & Piston Kit
- Sleeve & Piston Kit For models (C169 CID & C175 Gas 4-cylinder engines) For tractors with stepped head pistons-with .875" Piston Pin Diameter. Model 300 To SN# 48048. Complete for 4 Cylinders, overbore 3-5 8" pistons supplied. NOTE: if your piston pin dia. is 1.109" you need to order bushings #366883R92. (Part No: PK167)
$331.45 [Enlarge Picture]

 
Engine Rings
Piston Ring Set - 3-7 16" Overbore. Complete ring set for 4 pistons. For C152 CID DISTILLATE 4 cylinder engine. Contains 3 compression rings 3 32 and oil ring 3 16 per cylinder. For H & HV to SN# 391357, O4, OS4, W4 to SN# 33339. For H, HV, O4, OS4, W4 (Part No: PRS152)$64.15

Piston Ring Set, 3 Inch Bore - Ring set for 4 pistons. For C113 CID gas 4 cylinder engine. Contains 4 compression at 1 8, 1 oil at 3 16 per cylinder. NOTE THAT YOU MAY ONLY NEED 3 OF THE 4 COMPRESSION RINGS. For tractors: F12, F14, I12, O12, O14, W12, W14. (Part No: 2C710)$136.02

 
Fuel System / Air Intake
Fuel Filter, CAV type
- For models 2300, 2400, 2424, 2444, 248, 2500, 2500A, 258, 268, 3414, 3514, B414, 1294, 1394, 1494, 1594, 2350, 276, 278, 354, 364, 384, 385, 424, 433, 434, 444, 454, 484, 485, 533, 574, 584, 585, 633, 644, 674, 684, 685, 733, 744, 784, 785, 833, 844, 884, 885, 201. Replaces 3044506R1. NOTE: verify you have CAV type filter before ordering. (Part No: S.00296)
$5.86 [Enlarge Picture]

Fuel Pump Overhaul Kit - For early models with the diaphram attached onto the shaft with a nut. For models F12, F14, I9, I12, O12, O14, W9, W12, W14. NOT FOR USE WITH METHANOL BLENDED GAS***THIS IS FOR THE ORIGINAL O.E.M. PUMP (PART # 24527D) AND THE EARLY AC PUMP. BOTH FEATURED A HAIR SPRING CHECK VALVE; ALSO THE DIAPHRAM IS ATTACHED TO THE SHAFT WITH A NUT. CAN BE USED FOR THE LATE AC REPLACEMENT PUMP, HOWEVER THE CAGED CHECK VALVE, WHICH IS INCLUDED IN IHS164, MUST BE REUSED; ALSO THE SHAFT MUST BE GROUND TO REMOVE THE OLD DIAPHRAM, AND PEENED OVER AFTER THE NEW DIAPHRAM IS ATTACHED. CONTAINS: DIAPHRAM, MOUNTING GASKETS, FUEL BOWL SCREEN AND GASKET, PIVOT SHAFT, PLUNGER, SPRINGS, RETAINERS, PACKINGS. (Part No: IHS854)$64.95

 
Gauges
Water Temperature Gauge with IH Logo
- TEMPERATURE GAUGE WITH 19 inch LEAD & IH Logo. FITS MODELS A, H, M, Super A, Super M (300, 350 UTILITY). Fitting may require the OEM Adapter 51510D which we do not have available. (Part No: 67135D)
$25.49 [Enlarge Picture]

 
Hitch / Drawbar
2 Point Conversion Kit
- Easy on and off in just a few minutes. 26" spacing between lift arms. For IHC FARMALL 300, 330, 340, 350, 450, 460, 560 (With exposed round rockershaft) (Note: Check tractor model. Utility models require a different toplink bracket. See HK-826, HK-1126, or HK-1132). Weight is 70 lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical Freight is $50.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. ALLOW 2 TO 4 WEEKS DELIVERY TIME. (Part No: HK126)
$362.84 [Enlarge Picture]

2 Point Conversion Kit
- For IHC Farmall Models: 300, 330, 340, 350, 450, 460, 560 and other models with exposed round rockershaft.(Not for 460 or 560 utility models.) Easy on and off in a few minutes. Converts 2 point fast hitch to standard 3 point. Both 2 pt. and 3 pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Cat.II, 32" spacing between lift arms. Weight is 70 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK132)
$340.03 [Enlarge Picture]

2 Point Conversion Kit
- For IHC Farmall 240. Easy on and off in a few minutes. Converts 2 pt. fast hitch to standard 3 pt. Both 2 pt. and 3 pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.I 26". (Top link bracket replaces casting at top rear of Tractor or belt pulley housing.) 3" prong.Weight is 67 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK226)
$395.00 [Enlarge Picture]

2 Point Conversion Kit
- For IHC Farmall C, Super C, 200, 230 (2 AND 1 2" prongs.)Easy on and off in just a few minutes. Converts 2pt. fast hitch to standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive 'Snaplock' linchpins. Instruction manual and parts list included. Cat.I 26". Weight is 67 lbs. * This item dropped shipped from mfg. Allow 2-3 week for delivery.* Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK326)
$404.44 [Enlarge Picture]

2 Point Conversion Kit
- For IHC Farmall 544 and 656. Easy on and off in just a few minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.I 26". Weight is 72 lbs. Additional Shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK426)
$437.40 [Enlarge Picture]

2 Point Conversion Kit
- For IHC Farmall 544 and 656. Easy on and off in just a few minutes. HK-432 is similar to HK426 but Cat. II angled lift arms are provided. Converts 2pt. fast hitch to standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.II 32". Weight is 77 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK432)
$409.72 [Enlarge Picture]

2 Point Conversion Kit
- For IHC Farmall 240. Easy on and off in just minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2pt and 3pt. equipment can be used.Screw type top link with plenty of adjustment. Easy to use positive snaplock linchpins. Instruction manual and parts list included. Cat.I 26 inch. (For models with 3 holes on rear housing of mount 5x5.5 flat plate top link bracket.) (Note: check tractor - model 240 was built two ways, see HK226.) Weight is 67 lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical Freight is $80.00. Allow 2 - 4 weeks delivery time. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK526)
$357.98 [Enlarge Picture]

2 Point Conversion Kit
- For IHC Farmall Models: 706, 756, 806, 826, 856, 1206 and others. Easy on and off in just a few minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.I 26". Weight is 72 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates.Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK626)
$363.26 [Enlarge Picture]

2 Point Conversion Kit
- For IHC Farmall Models: 706, 756, 806, 826, 856, 1206 and other models. HK-632 is similar to HK626 but Cat. II angled lift arms are provided. Easy on and off in just a few minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive snaplock linchpins. Instruction manual and parts list included. Cat.II 32 inch. Weight is 77 lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical Freight is $80.00. Please allow two weeks for delivery. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK632)
$391.77 [Enlarge Picture]

2 Point Conversion Kit
- For IHC Farmall Model: 606. Easy on and off in just a few minuted. Converts 2pt. fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.I 26". Weight is 70 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK726)
$374.88 [Enlarge Picture]

2 Point Conversion Kit
- For IHC Farmall Model: 606. HK-732 is similar to HK726 but Cat. II angled lift arms are provided. Easy on and off in just a few minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.II 32 inch. Weight is 72 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK732)
$391.77 [Enlarge Picture]

2 Point Conversion Kit
- For IHC Farmall 404, 504 and some 300, 350 models. For all 300, 330, 340, 350 and 574 utility models. Easy on and off in a few minutes. Converts 2pt fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive snaplock linchpins. Instruction manual and parts list included. Cat.I 26 inch. For IHC Farmall 404, 504 and some 300, 350 models. For all 300, 330, 340, 350 and 574 utility models. (Rockershaft not exposed or not round.) (3 threaded holes on rear housing.) Weight is 69 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK826)
$368.54 [Enlarge Picture]

2 Point Conversion Kit
- For Farmall 400 ROW CROP. (With no exposed rockershaft.) Easy on and off in just a few minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2pt. and 3pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.I 26". Weight is 72 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1026)
$456.19 [Enlarge Picture]

2 Point Conversion Kit
- For IHC 460 and 560 Utility models. Easy on and off in just a few minutes. Converts 2pt. fast hitch to Standard 3pt. Both 2 pt. and 3 pt. equipment can be used.Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.I 26". Weight is 68 lbs. Additional shipping charges apply. Call 1-800-853-2651 for rates. Typical Freight is $50.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1126)
$368.54 [Enlarge Picture]

2 Point Conversion Kit
- For IHC 460 and 560 Utility models. HK-1132 is similar to HK1126 but Cat. II angled lift arms are provided. Easy on and off in just a few minutes. Converts 2 pt. fast hitch to Standard 3 pt. Both 2 pt. and 3 pt. equipment can be used. Screw type top link with plenty of adjustment. Easy to use positive "snaplock" linchpins. Instruction manual and parts list included. Cat.II 32". Weight is 69 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $50.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1132)
$386.49 [Enlarge Picture]

3 Point Conversion Kit
- For IHC Farmall Model: Standard Cub - Cat. 0 I (Not for Lo-Boy or Cadet Lawnmower)(Uses existing hydraulic lift).Weight is 125#.m Additional Shipping Charges apply call 1-800-853-2651. Typical Freight is additional $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK90)
$772.99 [Enlarge Picture]

3 Point Conversion Kit
- For IHC Farmall Model: Cub Lo-Boy - Cat. 0 I (Uses existing hydraulic lift)(Not for 154, 184, 185 models) (Not for Cadet Cub Lawnmower)Picture is not exact but hitch is similar.Weight is 124#. Additional Shipping Charges Apply. Call 1-800-853-2651. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK91)
$784.60 [Enlarge Picture]

3 Point Conversion Kit
- For IHC Farmall Models: Super A, 100, 130, 140 - Cat. I With standard pull-type drawbar (Uses existing hydraulic lift).Weight is 80#. Additional shipping charges apply. Call 1-800-853-2651. Typical Freight is $80.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK95)
$576.27 [Enlarge Picture]

3 Point Conversion Kit
- For IHC Farmall Models: 100, 130, 140 - Cat. I (With IH 1-pt. fast hitch) (Uses existing hydraulic lift).Weight is 65#. Additional shipping charges apply. Call 1-800-853-2651 for rate. Typical freight is $80.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. Same as HK95 except does NOT come with vertical arms. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK96)
$443.52 [Enlarge Picture]

3 Point Conversion Kit
- Three Point Hitch for IH Farmall Models: C, Super C, 200, 230 - Cat. I (Uses existing hydraulic lift).Weight is 190#. Additional charges apply. Call 1-800-853-2651 for rates.Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK102)
$1009.73 [Enlarge Picture]

3 Point Conversion Kit
- For use with ONE hydraulic cylinder.For INTERNATIONAL HARVESTER Models: H, M, MTA, Super H, Super M, Super MTA, MD, 300, 340, 350, 400, 460, and 504 - Cat. I II (Requires one 3" x 8" hydraulic cylinder.) *Hydraulic cylinders and hoses are not included. Weight is 237 Lbs. Additional shipping charges apply. Typical freight is $100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1106)
$977.81 [Enlarge Picture]

3 Point Conversion Kit
- For use with TWO hydraulic lift cylinders (not included. For M, MTA, Super M, Super MTA, MD, 400, 450, 460, 504, and 560 also for 544 and 656 with spacer #861188.(Requires two hydraulic cylinders)which can be purchased separately as part #308DU (Order optional bracket #861190 to use swinging drawbar) Cat. I II Weight is 260Lbs. Note: HK-11062 is similar to the picture shown but has two cylinder locations. Additional shipping charges apply. Typical Freight is 100.00. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK11062)
$1022.40 [Enlarge Picture]

3 Point Conversion Kit
- For Farmall 400 Row Crop (With no exposed rockershaft.) HK-1032 is similar to HK1026 but Cat. II angled lift arms are provided. Ruggedly constructed. Cat.I and Cat.II implements can be used. Screw type top link with plenty of adjustment. Heavy duty ball type sockets. Adjustment for various lifting heights. Turnbuckle lift arm adjustment on both sides. Easy to use 7 16" spring type linch pins. Lock nuts for positive adjustment hold. 1-1 8" threaded stubs on adjustable links. Instruction manual and repair parts list with each kit.(DOES NOT INCLUDE DRAWBAR.) Cat.II 32". Weight is 74 lbs. Additional shipping charges apply. Please allow 2-4 weeks delivery time. Call 1-800-853-2651 for rates. Typical Freight is $80.00. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK1032)
$478.36 [Enlarge Picture]

Conversion Tong
- Two Point Conversion Tong Straight Left Hand Tong With Combination Cat. I & Cat. II Ball For Converting IHC Two Point Fast Hitch To Three Point. About 28 inch overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH1447)
$171.07 [Enlarge Picture]

Conversion Tong
- Two Point Conversion Tong Straight Right Hand Tong With Combination Cat. I & Cat. II Ball For Converting IHC Two Point Fast Hitch To Three Point. About 28 inch overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH1448)
$171.07 [Enlarge Picture]

Conversion Tong
- Two Point Conversion Tong Bent Type, Left Hand Tong With Combination Cat. I & Cat. II Ball For Converting IHC Two Point Fast Hitch To Three Point.About 32 inch overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH14416)
$180.78 [Enlarge Picture]

Conversion Tong
- Two Point Conversion Tong Bent Type, Right Hand Tong With Combination Cat. I & Cat. II Ball For Converting IHC Two Point Fast Hitch To Three Point. About 32 inch overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH14417)
$180.78 [Enlarge Picture]

Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7 8" mounting pins and adapter bushings, 27-1 4" width, 3-1 2"x 3-1 2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$284.34 [Enlarge Picture]

Swinging Drawbar
- For models M, MD, Super M, Super MD. Swinging Drawbar. Dimensions: 1" thick, 52-1 4" center to center. ***An additional shipping charge of $10.00 will be added to the order due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 357529R1)
$165.66 [Enlarge Picture]

 
Hydraulic System
Hydraulic Pump
- For (Cub 154, Cub 185 All Lo-Boy) Cub 184. Hydraulic Pump. NOTE: When replacing 404870R91 pump for Cub 154 Lo-Boy SN# <22332 Applications, you must also order Connector 218-5065 from CASE IH. (Part No: 544017R91)
$325.00 [Enlarge Picture]

 
Lights
Headlamp Assembly, Tear-Drop- 12 Volt
- Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Tear-Drop vs. Flat-Back) before ordering. (Part No: 45640DB-12V)
$42.90 [Enlarge Picture]

Headlamp Assembly, Tear-Drop- 6 Volt
- Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Tear-Drop vs. Flat-Back) before ordering. (Part No: 45640DB)
$42.90 [Enlarge Picture]

Headlamp Assembly, Tear-Drop- 6Volt
- Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5 inches in diameter. Price is for one headlamp assembly. Does not include mounting bracket. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W4, Super W6, Super A, W4, W6, W9, WD6, WD9. Verify your configuration (Tear-Drop vs. Flat-Back) before ordering. (Part No: 45640DB)
$42.90 [Enlarge Picture]

Switch, Light
- Fits Cub (SN: 224401 >, Cub Lo-Boy (SN: 18701 >), Cub 154 Lo-Boy, Cub 185 Lo-Boy, 140 (SN: 26801 - 57723, with GENERATOR, 140 (SN: 57724 >, with ALTERNATOR), 184, 354, 4100, 4156, 444, 454, 464 (SN: < 109150), 574 (SN: < 114908), 674 (SN: < 108104), 2300, 2444, 2500 (SN: < 114908). (Part No: 376851R92)
$32.50 [Enlarge Picture]

 
Miscellaneous
Cab Foam Kit
- With Headliner 10-Piece - Black For models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R1236)
$330.43 [Enlarge Picture]

Canopy
- 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$402.16 [Enlarge Picture]

Canopy, Small Tractors
- 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$292.51 [Enlarge Picture]

Deluxe Tractor Umbrella
- Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X)
$145.07 [Enlarge Picture]

Heater Cab, Custom Tailored
- Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. SPECIAL ORDER ITEM for Models: C, Super C, 200, 230. (Part No: 1212455)
$306.02 [Enlarge Picture]

Heater Cab, Custom Tailored
- Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. SPECIAL ORDER ITEM for Models: MD, Super MD, Super MTA, MDTA. (Part No: 1212463)
$306.02 [Enlarge Picture]

Heater Cab, Custom Tailored
- Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. SPECIAL ORDER ITEM for Models: 300, 330, 350 std or utility models. (Part No: 1212448)
$306.02 [Enlarge Picture]

 
PTO / Driveline
PTO Seal - For models H after SN# 118000, (M, MD, Super M and Super MD after SN# 59957), Late W4, W6, W9, Super W4, Super W6, Super W9, B250, B275, B414; Also fits the follwonig modesl with transmission driven PTO (not Live PTO): MTA, 300, 330, 350, 354, 364, 384, 400, 424, 434, 444, 450, 454, 544, 600, 650, 2300, 3414, 3514, 3616. Replaces 3065217R91, 358772R91, 358812R91. NOTE: THIS SEAL IS .312 INCHES WIDE. VERIFY THE WIDTH OF YOUR OLD SEAL. YOU NEED TO INSTALL 2 OF THESE IF YOUR OLD SEAL IS WIDER. (Part No: 45702D)$17.95

PTO Shaft Seal Kit - For models 454, 464, 484, 574, 584, 674, 684. BEARING & SEAL KIT FITS: 71230 IPTO SHAFT; FRONT SEAL DIAMETER 1.750"; REAR SEAL DIAMETER 1.625". KIT INCLUDES: RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, IPTO SEAL & REAR SEAL. (Part No: R3593)$61.75

 
Paint
Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP)$42.52

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447SP)$51.68

Paint, Cub Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. This is a special order item please allow up to two weeks for delivery. (Part No: TP915SP)$41.34

Paint, Farmall Gray, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP112SP)$51.68

Paint, Farmall Red, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP110SP)$42.52

Paint, Gloss Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550SP)$42.52

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700SP)$42.61

Paint, IH Blue, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP910SP)$39.87

Paint, IH Red, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP905SP)$42.52

Paint, McCormick Deering Gray, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP450SP)$51.18

Paint, Non Glare Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP120SP)$42.52

Paint, Off White, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP900SP)$42.52

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225SP)$42.52

Paint, Soft Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200SP)$42.52

 
Seats
Pan Seat 4-Bolt Mount
- Pan Seat with a RED AND WHITE VINYL Cover. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: 357518R91)
$129.95 [Enlarge Picture]

Pan Seat Flip over with lock Rod - RED AND WHITE Vinyl Pan Seat, Flip over seat with lock Rod. Like Original Seat, Complete With Lock. Fits A, B, BN, & Super A. (Part No: 50570DC)$208.68

Pan Seat with Slide on Seat Bottom
- RED AND WHITE Vinyl Pan seat With flip over seat with slotted Slide on Seat Bottom.For Earl Models H, M. (Part No: 49498DD)
$210.28 [Enlarge Picture]

Seat Mounting Bracket - ADAPTER PLATE, FOR MOUNTING TISCO BRAND TS SERIES ADJUSTABLE BASE SUSPENSION SEATS ON INTERNATIONAL TRACTORS: HYDRO 84, 454, 464, 574, 674, 584, 684, 784. For 454, 464, 484, 574, 584, 674, 684, 784, HYDRO 84 (Part No: TS424SB)$41.63

Seat Mounting Bracket
- ADAPTER PLATE, FOR MOUNTING TISCO TS SERIES ADJUSTABLE BASE SUSPENSION SEATS ON INTERNATIONAL TRACTORS: HYDRO 100, 186, 706, 756, 766, 806, 856, 886, 966, 986, 1026, 1056, 1066, 1086, 1206, 1256, 1456, 1466, 1486. SUGGESTED SEAT MODELS ARE TS950, TS1050, T For 1026, 1056, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 186, 706, 756, 766, 806, 856, 886, 966, 986, HYDRO 100 (Part No: TS806SB)
$43.61 [Enlarge Picture]

Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt ľup & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1294.75 [Enlarge Picture]

Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt ľup & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1294.75 [Enlarge Picture]

Seat, Air Suspension, Cloth, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt ľup & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056)
$1405.98 [Enlarge Picture]

Seat, Universal - Seat assembly, Black leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before purchasing. Weight 33 lbs. (Part No: TS1110BK)$106.23

Seat, Universal - Seat assembly, Blue leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BL)$109.62

Seat, Universal - Seat assembly, Yellow leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110YL)$106.23

 
Sheet Metal / Body Parts
Cab Glass - We have cab glass for: 384, 385, 484, 485, 584, 585, 684, 685, 784, 785, 884, 885. Call for your specific application.***SPECIAL HANDLING AND SHIPPING BY TRUCK FREIGHT MAY BE REQUIRED ON THESE PART. ADDITIONAL SHIPPING WILL APPLY*** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: CAB_GLASS)$0.00

Fender
- For A, B. Fender, does not include bracket. Add $10 each to shipping charges due to size weight. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: 51179DX)
$114.75 [Enlarge Picture]

Fender - For Farmall C, Super C, 200, 230 Replaces 351248R91 This fender fits either left or right side. You must order two for a complete set. An addtional 20.00 shipping charge will be added to this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 351248R91)$167.50

Fender
- For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450, and will also work (though not exactly original) for: 340, 460, 504, 560. This fender fits either left or right side. You must order two for a complete set. An additional $20.00 shipping charge will be added for each fender due to weight and or size. Mounting Plate and Spacer sold seperately. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 51500DB)
$132.00 [Enlarge Picture]

Fender (LH)
- For models 1026, 1206, 1256, 1456, 544, 656, 706, 756, 806, 826, 856. This fender is used with 399335R1 bracket. ADD $10 aditional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 399328R2)
$222.80 [Enlarge Picture]

Fender (RH)
- For models 1026, 1206, 1256, 1456, 544, 656, 706, 756, 806, 826, 856. This fender is used with 399336R1 bracket. Add $10 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 399329R2)
$222.80 [Enlarge Picture]

Fender Extension Mounting Kit
- One kit used per tractor. For models H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDTA, O4, Super W4, W6, WD6, Super W6, Super W6TA, W9, WD9, Super WD9, 100, 130, 140, 400, 230, 240, 300, 330, 340, 350, 400, 450. Fender mounting Kit includes 2 fender flat brackets with (34 Pieces) all mounting hardware. ADD $5.00 to shipping costs due to weight. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. Replaces IHS364. (Part No: 8000072)
$58.50 [Enlarge Picture]

Fender Mounting Bracket, Left
- For 1026, 1206, 1256, 1456, 706, 756, 806, 826, 856. Fender Mounting Bracket, Left Hand. Fits with fender E399328R2. Add $10 additional shipping due to shipping weight of 38 lbs. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 399335R1)
$132.88 [Enlarge Picture]

Fender Mounting Bracket, Right
- For models 1026, 1206, 1256, 1456, 706, 756, 806, 826, 856. Fender Mounting Bracket, Right Hand. Fits with fender E399329R2. Add $10 additional shipping due to shipping weight of 38 lbs. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 399336R1)
$132.88 [Enlarge Picture]

Fender, LH
- 1 Light. For models 1066, 1466, 1468, 1566, 1568, 666, 686, 766, 966, Hydro 100, Hydro 70, Hydro 86. **$20.00 ADDED TO SHIPPING DUE TO WEIGHT SIZE.** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 533187R1)
$221.53 [Enlarge Picture]

Fender, LH
- For models Super A, 100, 130, 140. **THERE IS AN ADDIONAL $10 SHIPPING CHARGE DUE TO SIZE WEIGHT ON THIS ITEM** *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: 350608R1)
$149.50 [Enlarge Picture]

Fender, LH, Hi-Crown
- For models 584, 585, 595, 684, 685, 695, 784, 884, 885, 895. Additional $20 for shipping will be charged due to size weight of this item. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: 538641R4)
$276.25 [Enlarge Picture]

Fender, RH
- Hi flat top. For models 584, 585, 684, 685, 784, 884, 885. Additional $50 will be added to your order due to the size of this item as it must be shipped truck freight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 3123649R2)
$299.00 [Enlarge Picture]

Fender, RH
- 1 Light. For models 1066, 1466, 1468, 1566, 1568, 666, 686, 766, 966, Hydro 100, Hydro 70, Hydro 86. **$20.00 ADDED TO SHIPPING DUE TO WEIGHT SIZE.** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 533188R1)
$221.53 [Enlarge Picture]

Fender, RH
- For models Super A, 100, 130, 140. **THERE IS AN ADDIONAL $10 SHIPPING CHARGE DUE TO SIZE WEIGHT ON THIS ITEM***IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: 350609R1)
$149.50 [Enlarge Picture]

Fender, RH, Hi-Crown
- For models 584, 585, 595, 684, 685, 695, 784, 884, 885, 895. ** Add $20 for shipping due to size weight ** *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: 136165A1)
$267.99 [Enlarge Picture]

Hood
- Bare Metal-Unpainted. 25 1 2 inches Long. Fits A (to SN# 41329), B (to SN# 40192). DISTILLATE or KEROSENE engines only. DZUS fasteners sold separately (4 Required) Order part number R5047. (Part No: 51148DX)
$213.54 [Enlarge Picture]

Hood
- Bare Metal-Unpainted. 4 Holes. Fits A (SN# 41330 and up), Super A (up to SN# 355699), B (SN# 40193 and up). DISTILLATE or KEROSENE engines only. Does NOT Include Hooks and Springs. Order part number R5046 for Hook and Spring Kit. (3709RTP) (Part No: 58145DX)
$177.86 [Enlarge Picture]

Hood
- Bare Metal-Unpainted. Fits Super A (SN# 356001 and up), Fits C & Super C. KEROSENE or DISTILLATE engines only. Does NOT include brackets. DZUS fasteners sold separately (4 Required) Order part number R5047.(3711RTP) (Part No: 352051R11)
$177.86 [Enlarge Picture]

Rear Cab Glass
- For models Hydro 186, 786, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788. **THIS IS A SPECIAL HANDLING ITEM REQUIRING TRUCH FREIGHT. ADDITIONAL SHIPPING CHARGE OF $150 WILL BE ADDED TO YOUR ORDER.*** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 109318C2)
$107.69 [Enlarge Picture]

Windshield Glass, Upper
- For models Hydro 186, 786, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788. ***THIS ITEM MUST BE SHIPPED TRUCK FREIGHT. $150.00 WILL BE ADDED TO THE SHIPPING CHARGE.****IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: 109133C3)
$242.88 [Enlarge Picture]

 
Steering
Axle
- Heavy duty main axle assembly includes bushings. For models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Additonal $45 will be charged For shipping due to weight). IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 7453)
$590.68 [Enlarge Picture]

Axle, Center
- Fits 52" to 76", for ball type stay rod, if 223314 cylinder pin used can replace OEM 71818C91. For models Hydro 100, Hydro 186, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: 71816C91)
$974.27 [Enlarge Picture]

Axle, Center
- Pin style, uses 482669R1 bushing & 120732C2 pin. For models (Hydro 186, 786, 886, 986, 1086, 1486, 1586 all with late SN#), 3088, 3488, 3688, 5088, 5288, 5488, 1822, 1844, 2022, 2044. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: 120733C91)
$1124.63 [Enlarge Picture]

Front Axle Assembly, Wide, Heavy Duty - For M, Super M, MTA, 400, 450. Includes 6 bolt hubs with 6" bolt circle and 4.62" pilot diameter hole, bearings and seals are also included. Heavy Duty Front Axle with hubs and mounting parts. Width on wide axles are adjustable from 60" to 86". Additional $ 100 shipping due to the weight of this item 320 lbs. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 23209)$1567.19

Front Axle Assembly, Wide, without hubs - For H, Super H, 300, 350. Complete Front Axle without Hubs contains cap screws with lock washer, Steering Bracket Assembly, Rear Saddle Assembly, Front Saddle Assembly, Spindles, and Castlellated nuts. Width on wide axles are adjustable from 60" to 86". ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: 21015)$1316.90

Front Axle Assembly, Wide, without hubs - REPLACES : DU400 (Model No.) NOTE : Standard Duty Models do not include hubs and bearings. Use original narrow front axle hubs and bearings. Standard Duty Models are not recommended for use with flotation tires. Fits these models: 400, 450, M, MTA, Super M. Width on wide axles are adjustable from 60" to 86". Additional $ 100 shipping due to the weight of this item 276 lbs. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 21019)$1429.22

Spindle, LH
- Fits Tractor Models: 400, 450 with OEM WIDE FRONT, M LATE, MTA, Super M. (Part No: 360407R91)
$202.19 [Enlarge Picture]

Spindle-RH
- Fits Tractor Models 400, 450 with OEM WIDE FRONT, M LATE, MTA, Super M. (Part No: 360408R91)
$199.92 [Enlarge Picture]

Steering Arm
- STEERING ARM, Left Hand Splined. For 1066, 1086, 1466, 1468, 1486, 3088, 3288, 3688, 756, 766, 786, 856, 886, 966, 986, HYDRO 100 (Part No: 531248R2)
$61.26 [Enlarge Picture]

Steering Wheel
- 16 In. diameter. Mounts on 13 16" (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. Specify in COMMENTS if needed. (Part No: 385156R1)
$59.90 [Enlarge Picture]

Tie Rod Tube
- 16.062 inch length, .875 inch O.D. Tie Rod tube for 100, 130, 140, (A1, AV, AV1, Super A - AFTER SN# 318310.) (Part No: 356548R2)
$45.94 [Enlarge Picture]

 
Tools
*Combination Wrench Set
- 22 pieces SAE Metric. Polished chrome vanadium steel. Metric: 9, thru 19 mm. SAE: 1 4 thru 7 8. Comes with a durable plastic rack for handy storage. LIFE TIME UNLIMITED WARRANTY. (Part No: W1069)
$29.99 [Enlarge Picture]

GREASE GUN POWERLUBER 14.4V BATTERY
- Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$109.95 [Enlarge Picture]

MULTI TESTER
- Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420)
$24.76 [Enlarge Picture]

 
Wheels
Front Rim - Front Rim - Models H and M With Adjustable Tread Wheels - Blank front rim with 3 Loops (no center). 4-1-4 x 16. For models H and M. Add additional $10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R4179)$162.47

Front Rim
- Adjustable, blank front rim (no center). 3 x 15, with 3 loops. For models A, Super A, Super A1 B and C and Super C, 100, 130, 140, 200, 230 with Adjustable Tread Wheels. Add additional $10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 57095D)
$55.66 [Enlarge Picture]

Front Rim - Models A, B, C - Blank front rim (no center). 3" x 15", no loops. For models A, B and C. Add additional $10.00 shipping due to weight. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R2057)$49.79

Front Rim, No Loops
- Blank front rim (no center). 4-1 4" x 16", no loops. For Models: H, I4, I6, ID6, M, MD, O4, O6, W4, W6, WD6. Replaces: 354244R91, 354223R1, IHS193. Add additional $10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R2056)
$57.85 [Enlarge Picture]

Front Wheel Hub-6 Bolt - NOTE : This hub allows changing old style IH narrow front cast whl & hub to a standard 6 bolt. Hub uses standard wheel bearings & seals. Fits tractor models 400, M, and Super M. (Part No: 223311)$124.67

Rear Rim
- For A, Super A, B, C, 100, 130, & 140. 9" X 24" With Four Mounting Lugs. Replaces 56205DB. Add $15.00 For Shipping Due To Weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 114713C1)
$134.15 [Enlarge Picture]

Wheel Rim 7X24
- Rim. 7 wide, 24 diameter with four mounting clamps. For single rear wheels with 7-24, 8.3 8-24 or 9.5 9- 24 tires. Tractors: Cub, Cub Lo-Boy. For Cub, Cub Lo-Boy. Add additional $10.00 each for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 114717C1)
$118.19 [Enlarge Picture]




PayPal


Customer Service
Monday - Friday
10:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure

  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2014 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.