(800) 853-2651   Cart  View Cart    
Low Prices, Fast Shipping

 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums

IHC Farmall Cub Parts
[ Turn Off Pictures ]
 
Brakes
Brake Band
- Lined Brake Band (1) For Cub after SN# 173600. (Part No: 358753R21)
$28.89 [Enlarge Picture]

Brake Drum
- For Cub, Cub Lo-Boy. Brake Drum. (0690R) (Part No: 350805R2)
$36.78 [Enlarge Picture]

Brake Pedal Return Spring
- For models Cub, Cub Lo-Boy. (Part No: 350951R1)
$10.00 [Enlarge Picture]

Brake Rivet Tool
- Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1 4" throat, 1 8" dia. rivet punch. (Part No: RIVET_TOOL)
$35.25 [Enlarge Picture]

Brake Rivet Tool, Large
- Larger version of our Brake rivet tool. 3-3 8" deep throat x 2-1 8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$89.00 [Enlarge Picture]

 
Clutch
Clutch Alignment Tool
- 15 16" x 10 spline. For model Cub, Cub Lo-Boy. (Part No: 900151)
$7.90 [Enlarge Picture]

Clutch Disc
- For Cub, Cub Lo-Boy, Pacer, Pony. REMANUFACTURED (Rockford style clutch) 6-1 2" dia., 15 16" hub, 10 spline, organic lining. (Part No: 351773R91)
$34.90 [Enlarge Picture]

Clutch Housing Cover
- For Super A, AV, C, Super C, Cub, 100, 130, 140, 200, 230, 240. Clutch Housing Cover is Oval with Bracket and Screw. (4210R) (Part No: 351486R1)
$19.00 [Enlarge Picture]

Clutch Kit Complete - 6 1/2 Inch
- Clutch kit 'NEW'. Includes Pressure plate, Disc, Release bearing in carrier, Bushing, and Alignment tool. For the Cub, Cub Lo-Boy (ATL) (Part No: 351760R91-Comp)
$159.90 [Enlarge Picture]

Clutch Release Yoke, Pair
- Right and left hand sides. For Models: Cub above SN# 32229 and Cub Lo-Boy. Replaces 353240R2, 353239R2. (Part No: 3532LR)
$29.90 [Enlarge Picture]

Clutch Release, Yoke (LH)
- Fits Cub above SN# 32229 and Cub Lo-Boy. (Part No: 353239R2)
$15.20 [Enlarge Picture]

Clutch Release, Yoke (RH)
- Fits Cub above SN# 32229 and Cub Lo-Boy (Part No: 353240R2)
$15.20 [Enlarge Picture]

First and Reverse Shift Fork - For Models: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 355600R93, 355600R91, 353270R1, 353042R1, 353044R1, 352772R1. (Part No: 355600R92)$79.50

Pilot Bushing
- For Cub. This is a Bushing, not a bearing. Please verify before ordering. (Part No: 251266R1)
$6.20 [Enlarge Picture]

Pressure Plate Assembly, New
- For Cub, Cub Lo-Boy. Pressure Plate Assembly: 6 1 2", 3 Spring, cast Plate. (Part No: 351760R91)
$75.00 [Enlarge Picture]

Release Bearing, Original Style
- 1.250" I.D. For Cub, Cub Lo-Boy. Clutch Release Bearing. (Graphite) (Part No: 350921R11-OE)
$55.98 [Enlarge Picture]

Release bearing
- Release Bearing, With New & Improved Automotive Style Roller (Thrust) Bearing, not fixed graphite like original. For models Cub, Cub Lo-Boy. (Part No: 350921R11)
$58.00 [Enlarge Picture]

 
Cooling System
Belt, Fan
- For Cub and Cub Lo-Boy SN# 501 and up, gas. (Part No: 251428R1)
$13.14 [Enlarge Picture]

Fan Assembly
- For Cub and Cub Lo-Boy engine serial #s 501 to 165152. Assembly includes fan, pulleys, bearings & shaft. (Part No: 251427R91)
$67.18 [Enlarge Picture]

Fan Shroud
- Fits Cub, Cub Lo-Boy. (Part No: 351037R2)
$81.98 [Enlarge Picture]

Magnetic Block Heater - Universal. 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3 4 inches x 3-3 4 inches, delivers 300-400 degrees surface temperature. (Part No: MBH1153)$56.70

Radiator
- For Cub and Cub Lo-Boy. Includes gasket, uses 400586R1 radiator cap. Replaces OEM# 351878R92 (Part No: 351878R92)
$189.62 [Enlarge Picture]

Radiator & Air Hose Kit
- For Cub and Cub Lo-Boy. Radiator and Air Cleaner Hose Kit includes Original Whittek Tower Style Hose Clamps. (Part No: R2697)
$49.82 [Enlarge Picture]

Radiator Bolt and Washer Kit - Contains 18 bolt and 18 washers. Stainless Steel. For models Cub, Cub Lo-Boy. (Part No: IHS951)$14.90

Radiator Cap, Pressurized
- Fits Cub and Cub Lo-Boy. Restoration quality. Exactly like the original. (Part No: 400080)
$12.50 [Enlarge Picture]

Radiator Cap, Pressurized
- 7 psi cap for 1 inch tall filler neck, 2.33" O.D., 2.0" tang to tang, 1.367" tall. For models Cub 1975-1979 SN# 248125 and up, will also fit older Cubs when a pressurized system is desired. Will NOT fit 154, 184, 185 Cubs. (Part No: 365892R91)
$10.05 [Enlarge Picture]

Radiator Cap, Pressurized
- 7 psi cap for radiators with 3 4 inch deep filler neck, 2.33" O.D., 2.0" tang to tang, 1.096" tall. For model Cub 1975-1979 SN# 248125 and up, also fits older Cubs if pressurized system is desired, (Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy to use original cover you must drill 2 holes in the wings of the cap to mount the cover). (Part No: 404548R1)
$6.90 [Enlarge Picture]

Radiator Gasket
- For models Cub, Cub Lo-Boy. (Part No: 351032R1)
$9.84 [Enlarge Picture]

Radiator Support
- For Cub and Cub Lo-Boy. Radiator Support. (Part No: 350886R2)
$341.28 [Enlarge Picture]

Radiator cap
- Fits Cub and Cub Lo-Boy. Non-Pressure Cap. (Part No: 400586R1)
$6.94 [Enlarge Picture]

Water Block Drain Plug, Winged
- Plug 3 8" pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas Dsl), serviceable for Cub, Cub LoBoy. (Part No: 45314DC)
$11.18 [Enlarge Picture]

 
Decals and Emblems
Decal Set, Hood & Cab - All hood and cab decals. For model 6788. (Part No: R2330)$739.75

Decal, Fear This IH
- Black and red, 12-1 2 x 3-3 4. For all Models. (Part No: S.67826)
$18.80 [Enlarge Picture]

Decal, IH Block
- "IH" logo, 11". (Part No: R4682)
$21.70 [Enlarge Picture]

Decal, IH Block
- "IH", 3" x 3 1 4" Block. (Part No: R4681)
$7.76 [Enlarge Picture]

Decal, IH Block
- "IH" logo, 1 3 4". (Part No: R4680)
$6.20 [Enlarge Picture]

Decal, IH Block
- "IH", 1 1 4" Logo . (Part No: R4679)
$4.66 [Enlarge Picture]

Decal, IH Block
- "IH" logo, 7" printed on vinyl. (Part No: R5171)
$26.50 [Enlarge Picture]

Decal, IH Block
- "IH" logo, 8" printed on vinyl. (Part No: R5172)
$24.30 [Enlarge Picture]

Decal, IH Block
- "IH" logo, 10". (Part No: R5173)
$27.93 [Enlarge Picture]

Decal, IH Block
- "IH" logo no background, 1" printed on vinyl. (Part No: R5174)
$3.10 [Enlarge Picture]

Decal, IH Block
- "IH" logo no background, 1-5 8" printed on vinyl. (Part No: R5175)
$4.66 [Enlarge Picture]

Decal, IH Block
- "IH" logo no background, 2" x 2-1 2" printed on vinyl. (Part No: R5176)
$6.20 [Enlarge Picture]

Decal, IH Block
- "IH" logo no background, 3" x 3-1 2" printed on vinyl. (Part No: R5177)
$15.50 [Enlarge Picture]

Decal, IH Block
- "IH" logo no background, 4-1 2" x 4-3 4" printed on vinyl. (Part No: R5178)
$9.30 [Enlarge Picture]

Decal, IH Block
- "IH" logo no background, 5-1 2" x 6" printed on vinyl. (Part No: R5179)
$9.30 [Enlarge Picture]

Decal, IH Block
- "IH" logo no background, 6-1 2" x 7". (Part No: R5180)
$15.50 [Enlarge Picture]

Decal, IH Block
- "IH" logo no background, 7-1 2" x 8". (Part No: R5181)
$18.60 [Enlarge Picture]

Decal, IH Block
- "IH" logo on silver background, 2" x 2-1 4". (Part No: R5182)
$6.20 [Enlarge Picture]

Decal, IH Block
- "IH" logo no background, 10" x 11". (Part No: R5183)
$20.62 [Enlarge Picture]

Hood Ornament - Chrome. Comes with mounting hardware. Fits: [Cub Cadet: 70, 71, 72, 73, 100, 102, 104, 105, 122, 123, 124, 125, Cub Cadet (All Up to SN: 399999)] International - Fits: Cub (SN: 210001 - 248124), Cub Lo-Boy (SN: 10001 & up), As a Radiator Ornament: 154, 184, 185 (Part No: 392718R1)$28.00

International Decal
- 8-1 2" long, white with black outline. (Part No: R0679)
$9.30 [Enlarge Picture]

International Decal
- 23" long, black block letters. (Part No: R0680)
$15.50 [Enlarge Picture]

International Decal
- 23" long, white with black outline. (Part No: R0681)
$18.60 [Enlarge Picture]

International Decal
- 26" long, black block letters. (Part No: R0682)
$18.60 [Enlarge Picture]

International Decal
- 26" long, white with black outline. (Part No: R0683)
$20.62 [Enlarge Picture]

International Decal
- 29" long, black block letters. (Part No: R0684)
$20.62 [Enlarge Picture]

International Decal
- 29" long, white with black outline. (Part No: R0685)
$23.56 [Enlarge Picture]

 
Drive Train
1st & Reverse Sliding Gear
- For models Cub, Cub Lo-Boy. 13 teeth. (Part No: 350867R1)
$30.00 [Enlarge Picture]

Differential Shaft
- For Cub, Cub Lo-Boy. Left hand, 12 teeth. (0112R) (Part No: 350800R1)
$78.64 [Enlarge Picture]

Final Drive Gasket Set - Contains 1 rear axle houseing oil pan gasket, 1 outer seal cap gasket, 1 inner axle bearing cap gasket and 1 upper differential shaft gasket. Does 1 side, 2 kits needed per tractor. For models Cub, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 350820R1, 350823R1 and 350827R1. (Part No: 350804R1)$18.75

Gear Shift Knob
- For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Part No: 53717DA)
$11.20 [Enlarge Picture]

Lucas Hub Oil (quart)
- Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$9.06 [Enlarge Picture]

Rear Axle Outer Seal - Outer seal, must reuse your seal retainer. For models Cub, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 358799R1 and 547431R91. Width is .510 inches. (Part No: 350822R91)$17.70

Transmission Shaft
- Fits Cub. 42-3 8" long, 10 splines clutch end, 10 & 6 splines transmission end. Transmission Input Shaft For Cub, Cub Lo-Boy, Clutch-to-transmission shaft. (Part No: 351534R11)
$119.63 [Enlarge Picture]

 
Electrical System
(Starters, Generators, Coils, Wiring, etc.)
Alternator
- Tisco remanufactured Delcotron alternator, 42 amp, internal regulator, 3 terminal 3 o'clock position. Sold outright, no core, deposit, or return. Tractors Cub, Hydro 70, Hydro 86, 100, 186, 140, 464, 574, 666, 674, 868, 766, 786, 886, 986, 966, 1066, For 100, 1066, 1086, 140, 1466, 1468, 1486, 1566, 1568, 1586, 186, 2500A, 464, 574, 666, 674, 686, 766, 786, 86, 886, 966, 986, Cub, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Part No: 1100583)
$106.29 [Enlarge Picture]

Alternator
- Tisco remanufactured Delcotron alternators, 63 amp, internal regulator, 3 terminal 3 o'clock position. No cores, no deposit, no return. Tractors: Cub, Hydro 186, 574, 786, 886, 986, 1086, 1486, 1586, 2500A. For 1086, 1486, 1586, 2500A, 574, 786, 886, 986, Cub, HYDRO 186 (Part No: 1102920)
$101.66 [Enlarge Picture]

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. (Part No: ALTERNATOR)$0.00

Alternator
- 12 volt, 61 amp. For models 580 Super D, 580 Super E, 580D, 2090, 2290, 2390, 2590, 2094, 2294, 2394, (2470 SN# 8762940-8825000 & 8826412 and up), 2590, 2594, 3294, (1070 SN# 8675001 and up), 1270, 1370, 1570, 2670, (970 SN# 8816812-8817164 & 8817283 and up), 480C, 480D, 480LL, 580C, 2500A, 464, 574, 674, 4166, 4186, 1086, 1486, 1586, 3388, 3588, 3788, 4366, 4386, 4568, 4586, 886, 986, 3088, 3288, 3688, 3688HC, 5088, 5288, 5488, (Cub SN# 248125 and up), Cub 184, Cub 184 Lo-Boy, Hydro 70, Hydro 86, 666, 686, (815, 915 SN# 8001 and up), Hydro 186, Hydro 3488, 786. Replaces A46932, A46938, A47044, A47057, A47623, A47625, TY6600, 1102920, 1103160, 1103184, 1105164, 1105178, 1105514, 1105574, 20-7101161. (Part No: ADR0133)
$123.38 [Enlarge Picture]

Alternator Base Bracket Kit - Universal
- Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258)
$39.25 [Enlarge Picture]

Alternator Bracket Kit - Direct bolt on, uses existing belt, no cutting on hood. For models Cub, Cub Lo-Boy. Uses Alternator # ABC535. (Part No: IHALTCub)$38.25

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)$106.29

Alternator, Delco Type, 12 Volt - For models 140, 214, 220, 37, 404, 420, 424, 450, 460, 504, 560, 600, 606, 660, 700, 770, 780, 806, 2404, 2424, 2504, 2606, Cub, Lo-Boy, T6, TD6, TD9, Power Unit. Replaces Delco # 1100305, 1100335, 1100363, 1100364, 1100369, 1100394, 1100401, 1100409, 1100426. Remanufactured. Refundable $25.00 core charge will be added to your order. (Part No: TG-59)$213.92

Cable Rear Light
- 56" total length, 12 volt, for Cub SN# 239877 and above. (Part No: 387312R91)
$12.80 [Enlarge Picture]

Coil Bracket
- Universal Coil Bracket (Part No: R1940)
$6.61 [Enlarge Picture]

Coil, High Performance (Black), 12 Volt, Oil Filled
- Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511)
$35.99 [Enlarge Picture]

Coil, High Performance (Black), 6 Volt, Epoxy Filled
- Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111)
$39.21 [Enlarge Picture]

Coil, High Performance (Black), 6 Volt, Oil Filled
- Pertronix 'Flame Thrower' high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011)
$32.82 [Enlarge Picture]

Coil, High Performance (Chrome), 12 Volt, Oil Filled
- 12-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501)
$35.99 [Enlarge Picture]

Coil, High Performance (Chrome), 6 Volt, Oil Filled
- 6-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001)
$36.89 [Enlarge Picture]

Coil, Original, 12 Volt
- OEM style coil. For models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353875R91)
$54.95 [Enlarge Picture]

Coil, Original, 6 Volt
- OEM style coil. For models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353874R91)
$54.95 [Enlarge Picture]

Coil, Ultra High Performance (Black), Oil Filled
- Pertronix 'Flame Thrower II' Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$35.25 [Enlarge Picture]

Coil, Ultra High Performance (Chrome), Oil Filled
- Pertronix 'Flame Thrower II' Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001)
$39.68 [Enlarge Picture]

Condenser
- Services IH distributors 1951-1962 also services J4 magnetos. For models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Part No: 353903R1)
$6.37 [Enlarge Picture]

Distributor
- Used when changing from magneto to distributor, coil and bracket included. For models Cub, A, B, C, H, M. Refundable $100 MAGNETO core charge will be added to your order. Upon return of an original magneto for the same tractor, your core charge will be refunded. For replacement parts, uses Tune Kit ATK5BIR and Cap 351693R92. (Part No: R1197391)
$364.00 [Enlarge Picture]

Distributor Cap
- 2-3 16" high, fits 4 cyl. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Part No: 351693R92)
$7.26 [Enlarge Picture]

Distributor Drive Shaft
- Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Part No: 353934R11)
$28.95 [Enlarge Picture]

Distributor Dust Cover
- Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Part No: 353900R11)
$16.00 [Enlarge Picture]

Distributor, New
- Original IHC design. For models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. (Part No: R6332)
$294.00 [Enlarge Picture]

Distributor, Rebuilt
- Complete Remanufactured distributor for tractors with IH distributors. For models Cub, A, B, C, Super A, H, M, Super H, W6, W9, Super W6, 100, 130, 200, 240, 300, 400, 404, 450, 504. A refundable $100.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1197003)
$215.00 [Enlarge Picture]

Distributor, Rebuilt - Complete Remanufactured distributor for tractors with DELCO distributors. For models Cub, A, B, C. NO Core charge. (Part No: R1197004)$283.48

Electronic Ignition Conversion Kit
- Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Part No: 1442P6)
$89.48 [Enlarge Picture]

Electronic Ignition Conversion Kit
- Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve ground system only. (FOR NEGATIVE GROUND Order Part #1442)Use with distributor #357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Part No: 1442P12)
$89.48 [Enlarge Picture]

Electronic Ignition Conversion Kit - 12V Negative Ground
- Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Part No: 1442)
$81.11 [Enlarge Picture]

Fuse Holder Kit
- For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5 8 inch diameter hole in instrument panel. Includes 20 amp fuse, 2 spade connectors and mounting hardware. (Part No: 376852R91)
$8.92 [Enlarge Picture]

Generator
- 6 volt, 35 amp. For models 330 gas, 340 gas, 140 SN# 26800 and below, Cub Lo-Boy SN# 16398-18700, Cub SN# 221293-224400, 240. Refundable $25.00 core charge will be added to orders. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces 1100052, 1100055, 368652R92. (Part No: TG-72)
$283.45 [Enlarge Picture]

Generator - 12 volt, 20 amp. For models 1000, 1010, (140 SN# 26801 and up), (2656, 2706 gas), (2806, 806 up to 24555 gas Farmall or up to SN# 6015 gas International), (3414 with C153), (3616 gas 1965-70), 700, 700B, (706 gas), 810B, 900, 710B, 800, 800B, 810B, 900, (Cub Lo-Boy SN# 18701 and up), ((Cub SN# 224401-248124), TD6, TD9 1955-58). Refundable $22.50 core charge will be added to your order. (Part No: 1100401)$216.08

Generator Belt
- For C60 gas engine in: Cub (SN# 165153 & up), Cub Lowboy. Belt is 1 2" wide and 23-1 4" long. (Part No: 107671C1)
$12.50 [Enlarge Picture]

Generator, 6 Volt, Remanufactured
- 6 volt, 25 amp, Delco Fits Models: 200 1.75" SHAFT, 400 501-13673 GAS, A, A1 with BATTERY, AV with BATTERY, AV1 with BATTERY, B, BN, C, (Cub prior to SN 221292 and Cub Lo-Boy prior to SN 16397 - both with 1.75" long shaft) H, HV, M, MV, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MTA GAS, TD6 1955-56, TD9 1955-56, W4, W6, W6TA. Refundable $25.00 core charge will be added to your order after the order has been received and will not show on your reciept. (Part No: 356936R91)
$233.37 [Enlarge Picture]

Ignition Switch
- For the following Models using a magneto: Cub, Cub Lo-Boy, A, B, C, H, M, 100, 130, 140, 200, 230, 300, 350, 400. NOT like original. (Part No: 54207DB)
$9.90 [Enlarge Picture]

Ignition Switch - 2 terminal. For the following Models using a distributor: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, (140 6 volt), 200, 230. NOT like original. (Part No: 62801DC)$10.44

Ignition Tune Up Kit
- For IH Distributor-NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Plugs, Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: IHTK1)
$29.56 [Enlarge Picture]

Ignition Tune Up Kit
- Ignition TUNE UP KIT For Cub 1963 and Later with IH Distributor, 140, 340, 454, 504. Includes the Rotor, Point and Condenser (ATK9BIR Kit) Plus Spark plugs of 18mm, 1 2 inch reach, 7 8 inch hex. (Part No: IHTK2)
$30.21 [Enlarge Picture]

Ignition Tune Up Kit, Basic
- Kit contains: rotor, condenser, points and proper point gap gauge. For models Cub, Cub Lo-Boy, 140, 340, Hydro 70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856. All with 4 or 6 cylinder gas engines and battery ignition, 1963 and later with IH distributor (not for Prestolite). (Part No: ATK9BIR)
$27.34 [Enlarge Picture]

Ignition Tune Up Kit, Basic
- Fits 4 cylinder gas engines with battery ignition 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Part No: ATK5BIR)
$21.28 [Enlarge Picture]

Key Switch
- For models (140 from SN# 45001 and up), (Cub from SN# 239827 and up), Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 123. (Part No: 60736C1)
$29.95 [Enlarge Picture]

Key Switch, 2 Terminal
- With keys. For models (Cub SN# 224401 to 239826 with battery ignition), (Cub Lo-Boy from SN# 18701 and up with battery ignition), Cub Cadet 100, 100, (140 SN# 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Part No: 366313R91)
$19.95 [Enlarge Picture]

Magneto Point Set
- For J-4 Magneto only. (Part No: 353172R1)
$4.98 [Enlarge Picture]

Magneto Winding J4
- For tractors using a J-4 Magneto. (Part No: 352355R91)
$73.49 [Enlarge Picture]

Magneto, Wico XH & XHD, Service & Parts Manual
- Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25 [Enlarge Picture]

Rotor
- Rotor for J-4 magneto with teeth. Note: rotor is the black part in this picture. (Part No: 351692R1)
$44.00 [Enlarge Picture]

Rotor
- For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: 353896R1)
$4.20 [Enlarge Picture]

Spark Plug
- For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. Price shown is for EACH, shipped in lots of 4. Enter '4' in QTY box. Replaces OEM 360942R1. (Part No: AL386)
$3.24 [Enlarge Picture]

Spark Plug - Extended tip, 14mm thread, 3 4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)$3.64

Spark Plug - Extended tip, 14mm thread, 3 8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)$3.64

Spark Plug Wire Set, 4 Cylinder, Universal
- For use with Ignitor II high performance electronic ignition conversion kits. (Part No: S.66442)
$14.48 [Enlarge Picture]

Spark Plug Wire Set, Custom
- Delco Distributor Only. For models Cub, A, Super A, B, BN, C, Super C, H, Super H, M, MTA, 300, 350, 400, 450. (Part No: S.67475)
$19.98 [Enlarge Picture]

Spark Plug Wire Set, Universal - 6 Cyl.
- Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$20.02 [Enlarge Picture]

Spark Plug Wire Set, Universal, 4 Cyl.
- Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)
$17.22 [Enlarge Picture]

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. (Part No: STARTER)$0.00

Starter Drive
- For Cub and Lo-Boy 1947-1964, 3230, W9, 390. (Part No: 1850844)
$29.19 [Enlarge Picture]

Starter Solenoid
- For 6 volt, replaces delco 1465. (Part No: 142364HA)
$21.82 [Enlarge Picture]

Starter Solenoid
- 12 volt starter solenoid. (Part No: DR1467)
$17.00 [Enlarge Picture]

Starter Switch, Manual
- Starter switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A&AV, Super C, H, HV, Super H&HV, Super M&MV, Super W6&WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 Mounting holes, 190 I.D. With 1-3 8 centers. Replaces Delco 1918405, 1932131, and OEM IH 593292C1. (Part No: 1925781)
$10.08 [Enlarge Picture]

Starter, Generator Tag, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.40 [Enlarge Picture]

Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.40 [Enlarge Picture]

Starter, New - Fits 1947-1952: Cub, MD, and 50 Baler. 1954-1955: Model 64 Harvester, Farmall Cub engine C-60. Replaces 1109603, 1109613. (Part No: 1109611)$171.93

Starting Switch Lever
- Starting Switch Lever - Lever, pull rod starting switch. For 100, 130, 140, 200, 230, C, Cub, Cub Lo-Boy, H, HV, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A, WD6. (Part No: 1918322)
$11.14 [Enlarge Picture]

Switch, Ignition
- For Distributor Ignitions, 2 terminal switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230 (Part No: R2720)
$39.90 [Enlarge Picture]

Voltage Reducer with Bracket
- 12 volt to 6 volt. (Part No: S.52671)
$11.82 [Enlarge Picture]

Voltage Regulator, 12 Volt
- Replaces Delco regulators 1118981 & 1118999. For models Cub Cadet 70 & 100, Cub & Cub Lo-Boy, 460, 560. (Part No: 121577C1)
$27.05 [Enlarge Picture]

Voltage Regulator, 12 Volt
- 4-terminal flat mount. Fits most 12V tractors and combines prior to 1957. (Part No: AT11855)
$39.60 [Enlarge Picture]

Voltage Regulator, 6 Volt, Positive Ground
- REPLACES 121578C1, Delco 1118308, 1118780 & 1119575. Fits models: 100, 130, 140, 330, 340, Cub, Cub Lo-Boy, Super A, Super C, H, M, MTA. (Part No: GDR6003)
$24.95 [Enlarge Picture]

Voltage Regulator, Internal
- Alternator regulator, internal, heavy duty, replaces Delco numbers 1116392 & 1116387. Services Delco alternators: 1100578, 1102375, 1100583, 1100585, 1100587, 1100593, 1102920, 1102921, 1103160, 1103171, 1103183, 1103184, 1103971, 1105164, 1105538, 1107178, 1116. For tractors: 1066, 140, 1466, 1468, 1566, 1568, 2400A, 2500A, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 464, 5088, 5288, 5488, 574, 666, 674, 686, 766, 966, Cub, Cub Lo-Boy, HYDRO 100, HYDRO 70, HYDRO 86. (Part No: 585624C1)
$12.07 [Enlarge Picture]

Wiring Harness, Main, 12V, 1964-68 - Fits Cub SN# 224401 and up, Cub Lo-Boy SN# 18701 and up. Original style with cloth covered laquered wire and cotton braid. Also replaces 387262R91. (Part No: 404353R1)$110.70

Wiring Harness, Main, 6V, 1947-1949
- For models Cub(with SN# 501 to 99535) with Generator Relay wire. Original style with cloth covered laquered wire and cotton braid includes front lights. (Part No: 351325R91)
$89.10 [Enlarge Picture]

Wiring Harness, Main, 6V, 1950-1954
- For Cub, Cub Lo-Boy (SN# 99536-185000) with O Ground Cable wire, with Voltage Regulator wire. Lights are single wire, no ground. Original style with cloth covered laquered wire and cotton braid. (Part No: 354252R92)
$101.25 [Enlarge Picture]

Wiring Harness, Main, 6V, 1955-58
- For Cub(with SN# 185001 to 210000), Cub Lo-Boy (with SN# 501 to 10000) with lights, ground cable wire and Voltage Regulator wire. For use with lights requiring a ground wire. This is restoration Quality all wires have original Cloth wrap. (Part No: 363507R91-RES)
$95.85 [Enlarge Picture]

Wiring Harness, Main, 6V, 1955-58
- NOT Restoration Quality (for 'Working Tractor'). Wiring Harness, Main, 6V, 1955-58 - For Cub(with SN# 185001 to 210000), Cub Lo-Boy (with SN# 501 to 10000) with lights, ground cable wire and Voltage Regulator wire. For use with lights requiring a ground wire. Individual wires are Plastic coated with bundle cloth wrapped. (Part No: 363507R91)
$55.35 [Enlarge Picture]

Wiring Harness, Main, 6V, 1959-64 - For models Cub SN# 210001 to 224400 and Cub Lo-Boy SN# 10568 to 18700. Does not include headlight wiring. Reproduction of original with cloth covered laquered wire and cotton braid. (Part No: 371032R91)$112.05

Wiring Harness, Rear Light - This harness is for the switch to rear light. Original style. For models (Farmall Cub & Cub Lo-Boy 1959 to 1964 SN# 210001 to 224400), (International Cub Lo-Boy SN# 10568 to 18700). (Part No: 371033R91)$35.10

Wiring Harness, Rear Light with Ground
- For models Cub (SN# 185001 to 210000), Cub Lo-Boy(with SN# up to 10567). This harness is for the switch to rear light with ground cable 6-Volt. Length is 64" long. Restoration Quality. (Part No: 363508R91)
$39.86 [Enlarge Picture]

 
Engine Bearings
Main Bearing Set, .010 - For models Cub Lo-Boy & Cub, .010 Size. For C60 Engine with serial number less than ENG SN# <261717. (Part No: MBK60-010)$47.56

Main Bearing Set, .020 - For Cub Lo-Boy & Cub, .020 Size. For C60 Engine with serial number less than ENG SN# <261717 (Part No: MB60-20)$106.26

Main Bearing Set, .030 - For Cub Lo-Boy & Cub, .030 Size. For C60 Engine with serial number less than ENG SN# <261717. (Part No: MB60-30)$86.83

Main Bearing Set, Standard - For Cub Lo-Boy & Cub, STANDARD Size. For C60 Engine with serial number less than ENG SN# <261717 using rod with forging number 251246R13. If other than STD or forging number is different, specify size and number in comment Section. If .002 is needed the cost is $72.31 for this size. (Part No: MBK60)$54.58

Rod Bearing - Single rod bearing, available in Std, .010, .020, .030. For models Cub, Cub Lo-Boy with C60 engine and rod forging # 527457R11. (Part No: CB-998P)$16.90

Rod Bearing Set - For Cub Lo-Boy & Cub, For C60 Engine with serial number less than ENG SN# <261717. ** IMPORTANT-- NOTE ROD FORGING NUMBER (251246R3 OR 527457R11) and specify size of: Standard, .002, .010, .020 or.030 in 'Comments' when ordering. (Part No: CRK60)$46.29

 
Engine Gaskets
Gasket Set, Complete
- Complete Overhaul Gasket Set For Cub Lo-Boy, Cub. For C60 Engine. Includes crankshaft seals. (Part No: GK7560S)
$72.14 [Enlarge Picture]

Gasket, Head - Fits Cub, Cub Lo-Boy with SN# below 261717. (Part No: 251229R1)$32.59

Gasket, Pan
- Fits Cub, Cub Lo-Boy both with SN# below 261717. Must order in qty of 2, priced each. (Part No: 251369R1)
$11.99 [Enlarge Picture]

Head Gasket Set - For C60 Gas engine in: Cub, Cub Lo-Boy. (Upper gasket set with head gasket). (Part No: VGK7560)$41.60

Seal, Crankshaft, Front with wear sleeve
- Front Crankshaft Seal. For 100, 130, 140, 200, 230, 240, 330, 340, Super A-1, Super AV-1, Super C, Cub SN# <261717, Cub Lo-Boy SN# <261717. (Part No: 378193R91)
$27.74 [Enlarge Picture]

Seal, Crankshaft, Rear Main
- Rear Main Oil Seal. Fits Cub, Cub Lo Boy, with SN# below 261717. (Part No: 364692R91)
$14.41 [Enlarge Picture]

Silicone Black RTV
- Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$7.14 [Enlarge Picture]

Silicone Blue RTV
- Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 F to +500 F, 3.35 oz. tube. (Part No: PRM77BR)
$7.86 [Enlarge Picture]

Silicone Copper RTV
- Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75 F to +700 F, 3 oz. tube. (Part No: PRM101BR)
$11.78 [Enlarge Picture]

 
Engine Overhaul Kits
Basic In-Frame Engine Kit, with Flat Head Pistons - All Serial Numbers - Made by TISCO. Basic In-Frame Engine Kit, Less Bearings (C248 CID Gas or Distillate 4-cylinder engine). Model M, MV, O6, OS6, W6, . Verify Piston Pin Diameter of 1 5 16". (For engines with flat head piston.) Kit contains complete sleeve and piston kit(overbore from 3-7 8" to 4") with rings, pins and retainers, Upper gasket set (with head gasket) and pan gasket. (Part No: BIFH1151A)$387.58

Engine Overhaul Kit, Comprehensive - Made by TISCO. For Cub & Cub Lo-Boy using C-60 4 cyl gas engine with SN# 261717 and below using connecting rod #251246R13 (or 251246R1). Contains Piston Kit (flat top pistons & rings, pins & retainers), for Standard 2 5 8" bore, .020, .040, or.060, overbore. (specify when ordering in "comments"). Also contains complete Gasket Set, Connecting Rod Bearing kit, Main Bearing Kit, Valve Parts (intake & exhaust valves, springs, guides and keys). Available with Std, .010, .020 or.030 bearings. IMPORTANT: Specify Rod and Main bearing sizes and Piston Size in comments section. ***Piston Kit at .030 may be special ordered for an additional Charge. (Part No: EOKCUB)$462.09

In-Frame Overhaul Kit
- In Frame Overhaul Kit for Cub, Cub Lo-Boy with SN# below 261717, 4 cylinder Flat Head Piston gas engines, Kit includes, 4 Pistons with rings, 4 rod bearings.761" length, gasket overhaul set with seals. (PLEASE SPECIFY SIZE WHEN ORDERING, STD, .030 & .040) (Part No: IK600)
$278.07 [Enlarge Picture]

Lucas Assembly Lube
- Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. Its useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)
$6.71 [Enlarge Picture]

Overhaul Kit, Basic - Kit contains flat head pistons with rings sizes std., .030*, .040, main bearings sizes std., .010, .020, .030, rod bearings sizes std., .002, .010, .020, .030 length .761" for rod #251246R3, piston pin bushings, full gasket set. For models Cub, Cub Lo-Boy eng. SN# 261717 and below. NOTE: *PISTON KIT AT .030 MAY BE SPECIAL ORDERED FOR AN ADDITIONAL CHARGE. (Part No: OK600)$368.10

Valve Overhaul Kit
- Made by TISCO. Fits Cub, Cub Lo-Boy (4cyl GAS-C60 CID). Kit includes Valves, Valve Springs (For Non-Roto Exhaust Valve), Valve Keys And Valve Guides. (Part No: VOKH60)
$122.86 [Enlarge Picture]

 
Engine Parts
Cylinder Head
- Cub Cylinder Head Fits C-60 engine in: Cub &Cub Lo-Boy. Replaces 251228R11, 351779R91. (Part No: 355691R2)
$183.59 [Enlarge Picture]

Hand Starting Crank
- For Cub, Cub Lo-Boy. Hand Starting Crank WITHOUT Spinner. (Part No: 351010R31)
$29.50 [Enlarge Picture]

Hand Starting Crank with Spinner
- For Cub, Cub Lo-Boy. Hand Starting Crank WITH Spinner. (Part No: 351010R31-S)
$44.25 [Enlarge Picture]

Intake Valve, Single
- Intake Valve for Cub, Cub Lo-Boy, Eng SN# 261717 & Below Using Connecting Rod # 251246R13. (Flat Head Piston) (Rod Bearing Length.761")(For Sleeveless Engines) 4 required per engine. Springs, Guides & Keys Available at additional cost. PRICE IS FOR EACH, MINIMUM ORDER QUANTITY IS 4. (Part No: 251260R1)
$12.39 [Enlarge Picture]

Ring Gear, Flywheel - 84 teeth, 8.696 Inside diameter and 10.678" Outside diameter. For models Cub, (184 Baler), 55T, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. (Part No: 251270R2)$64.00

Valve Guide - For Cub and Cub Lo Boy both with SN# below 261717. Sold in quantities of 8, price is each. (Part No: 352973R3)$5.31

Valve Keys - For Cub and Cub Lo Boy with SN# below 261717. Set of 16 halves included, is enough for 8 valves or 1 engine. (Part No: 46209D)$8.32

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). (Part No: Valve-Kit)$0.00

Valve Spring
- Valve Spring without rotocap. for Models:Cub, Cub Lo-Boy, Eng SN# 261717 & Below Using Connecting Rod # 251246R13. (Flat Head Piston) (Rod Bearing Length.761")(For Sleeveless Engines). 8 Required Per Engine. PRICE IS FOR EACH, MIN. ORDER QTY. IS 8. (Part No: 251262R2)
$6.38 [Enlarge Picture]

Valve, Exhaust
- For Cub, Cub Lo-Boy, Eng SN# 261717 & Below Using Connecting Rod # 251246R13. (Flat Head Piston) (Rod Bearing Length.761")(For Sleeveless Engines) 4 Required per engine. Springs, Guides & Keys Available at additional cost. Price is for each, MUST BE ORDERED IN QUANTITIES OF 4. (Part No: 251261R2)
$19.40 [Enlarge Picture]

 
Engine Pistons and Sleeves
Piston Groove Cleaner
- For pistons up to 5 1 2 inches. Cleans grooves of 5 64, 3 32, 1 8, 5 32 and 3 16. (Part No: B1SB9055)
$24.95 [Enlarge Picture]

Piston Pin Bushing - Models:Cub, Cub Lo-Boy, Eng SN# 261717 & Below Using Connecting Rod # 251246R13. (Flat Head Piston) (Rod Bearing Length.761")(For Sleeveless Engines) ** Minimum qty order is 4, Priced each. (Part No: 251247R2)$7.90

Piston Ring Compressor
- Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1 2 inches. Range 3 1 2 to 7 inches. (Part No: 900521)
$35.67 [Enlarge Picture]

Piston and Ring Set, .060 - Overbore with Flat Top Piston.060. For models Cub, Cub Lo-Boy with C60 Engine (To S#264567). (Part No: PRK60-060)$162.00

Ridge Reamer
- Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560)
$63.87 [Enlarge Picture]

 
Engine Rings
Piston Ring Set - Standard. Fits C60 engine in Cub, Cub Lo-Boy. Complete set for 1 engine. (Part No: PRS60)$36.02

Piston Ring Set, .020 - Fits C60 engine in Cub, Cub Lo-Boy. Complete set for 1 engine. (Part No: PRS60-020)$37.50

Piston Ring Set, .030 - Fits C60 engine in Cub, Cub Lo-Boy. Complete set for 1 engine. (Part No: R3378R)$65.65

Piston Ring Set, .040 - Fits C60 engine in Cub, Cub Lo-Boy Complete set for 1 engine. (Part No: PRS60-040)$37.77

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3 32"), 4. Number and size of oil rings for each piston (Ex: (1) 5 32"). (Part No: RING-SETS)$0.00

 
Exhaust System
Chrome Exhaust Stacks
- Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 (Part No: CHROMEEXHAUST)
$0.00 [Enlarge Picture]

Exhaust Elbow - For horizontal exhaust between manifold 251232R91 and exhaust 363116R91. Use Clamp 362361R1. For Cub and Cub Lo-boy (Part No: 362359R1)$45.83

Muffler, Underslung
- Restoration quality with IH logo and part number stamped on side, horizontal with galvanized finish. Exhaust pipe 1.375" O.D. x 9.5" length, body 3" diameter x 10.875" length, intake pipe 1.313" I.D. x 1-7 8" length. For models Cub, Cub Lo-Boy. (Part No: 363116R91)
$50.20 [Enlarge Picture]

Rain Cap
- This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$9.80 [Enlarge Picture]

 
Fuel System / Air Intake
Air Cleaner Cap, Slides INTO Pipe
- 3.06" body diameter internal fit 1 1 4" O.D.. For models Cub, Cub Lo-Boy, A, AV, B, BN, Super A to SN# 355669. This cap slides INTO the pipe. (Part No: R4744)
$24.75 [Enlarge Picture]

Air Cleaner Cap, Slides OVER pipe
- 4 1 8" body diameter external fit 1 3 8" I.D.. For models Cub, Cub Lo-Boy, A, AV, B, BN, Super A to SN# 355669. This cap slides OVER the pipe. (Part No: 350750R91)
$24.75 [Enlarge Picture]

Air Cleaner Filler
- Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1 2" x 3-1 4". (Part No: S.43231)
$9.90 [Enlarge Picture]

Carburetor Float
- For carburetor models: 11340, 11704, 11340, 11704, 12122, 12613, 12632, 12911, 12115, 12285, 12342, 12225, 8928, 9749, 9167, 9752, 11188, 10514, 10498, 10386, 10441, 13794, 13781, 10522, 11115, 11338, 11339, 14007. For Tractor models: 100, 130, 140, 200, 230, 240, 330, 340, 404, A, B, C, Cub, Lowboy184, Super A, Super C. (Part No: CTP28)
$22.00 [Enlarge Picture]

Carburetor Float
- For Cub, Lo-Boy with C60 gas engine. Carburetor float with lever with original carburetors 251234R94 or 364579R91. (Part No: 251293R1)
$25.94 [Enlarge Picture]

Carburetor Float, Zenith
- For models 200, 230, 240, 330, 340, 404, A, AV, B, BN, C, Cub, Cub Lo-Boy, Super AV, Super C, Super A, ALL WITH ORIGINAL ZENITH CARBURETOR. Maximum diameter between each "tank" is 2-1 4". Also fits Zenith: 12522, 12566, 12911, 13794, 13876, 13877. 14007 and 14544 carburetors. (Part No: 53783D)
$24.68 [Enlarge Picture]

Carburetor Kit, Basic
- Kit for Zenith 11338, 11339, 12115, 12122, 12225, 12262, 12342, 12493, 12522, 12773, 12911, 13727, 13781, 13794, 13800, 13873, 13876, 13879, 13902 Includes Gaskets, Needle, & Seat. For models 130, 140, 200, 230, 240, 404, Cub, Cub 184 Lo-Boy, Cub Lo-Boy, Super A. (Part No: Z103)
$26.36 [Enlarge Picture]

Carburetor Kit, Basic
- Kit for IHC 251234R94, 364579R91, 63349C91, 405004R91 carbs on Cub, Cub 154. (Part No: IH101)
$22.00 [Enlarge Picture]

Carburetor Kit, Basic
- Kit contains: Needle & Seat Valve, 2 Gaskets, Throttle Shaft, 2 Bushings, 6 Sealing Washers. For Cub, Cub 154. For IH Carburetors 251234R94 or 364579R91.(66447S) (Part No: 63349C91)
$23.42 [Enlarge Picture]

Carburetor, New
- Designed just like the original carburetor. This Cub carburetor does not come with a choke lever. If a choke lever is needed, we have one available (Part number IHS240 $29.95 in comment section of order form). Used on: Cub & Cub Lo-Boy using C60 Gas engine. Replaces 251234R94. (Part No: 364579R91)
$255.00 [Enlarge Picture]

Carburetor, New
- With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 1974-79 Cub & Cub Lo-Boy using C60 Gas engine, SN# 312390 & up. Will fit SN# 312390 & below using our custom intake air hose (see p n CUB ADAPTOR)- Note: The replacement carbs inlet diameter is larger than original (for more power). Air inlet is 1-5 8" O.D. Carb is a replacement, not like original. Center to center on the 2 mounting bolts is 1-13 16 inches. Made in USA, 1 year warranty. (Part No: 13794)
$231.00 [Enlarge Picture]

Choke Cable
- Universal choke cable 72 inch long, 7 16 inch thread dia. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$15.22 [Enlarge Picture]

Choke Lever
- With stainless set screw, used on Carburetors with "IH" on float bowl. For Models: Cub, Cub Lo-Boy. Not for 154, 184 or 185 as these used a cable and not a rod type for choke. Used with carburetors 251234R91, 251234R92, 251234R93, 251234R94, 251293R91, 63349C91. (Part No: 351324R1)
$27.95 [Enlarge Picture]

Fuel Cap
- For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1 2 inches tall, Triple Baffle Style. (Part No: R3654)
$30.60 [Enlarge Picture]

Fuel Cap - Black - (Vented)
- Black Fuel Cap. REPLACES : 361910R91, 538063R1, 224839C91, 224839C92. Fits MOST: A, C, Cub, Cub Lo-Boy, Cub 185-Lo-Boy, H, M, MD, Super A, Super C, Super H, Super M, Super W4, Super W6, W6, W9, 100, 130, 140, 184, 200, 230, 300, 330, 340, 350, 400, 403, 404, 424, 444, 450, 460, 503, 504, 544, 560, 606, 615, 656, 706, 715, 756, 766, 806, 815, 826, 856, 915, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1640, 1660, 1670, 1680, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 4166, 4186. Cap fits neck inside diameter of 1 7 8 inches using 2 locking tabs. (Part No: 23995DC)
$7.10 [Enlarge Picture]

Fuel Cap, Chrome, Unvented
- Fits MOST of the following GAS and Diesel tractors: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, 04, 06, W4, W6, Super W4, Super W6, W9, 100, 130, 140, 4156, 4166, 4168. Cap fits neck inside diameter of 1 7 8 inches using 2 locking tabs. (Part No: 23995DC-CHROME)
$7.64 [Enlarge Picture]

Fuel Cap, Top Vented
- 2-11 16" I.D., 1.500" height (including splash guard) and 1.118" height. Says "Buy Clean Fuel Keep it Clean". For models A, AV, B, BN, C, Cub, Cub Lo-Boy (-(WILL NOT FIT 154, 184, 185)-), F12, F14, F20, F30, H, HV, I4, I6, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD18A, TD20, TD6, TD9. (Part No: 12770D)
$9.95 [Enlarge Picture]

Fuel Cap, Vented
- For MOST Models: A, Super A, B, C, Super C, H, Super H, M, Super M, Cub, 100, 130, 200, 230, 300, 350, 400, 450. Says Buy Clean Fuel . Cap fits neck inside diameter of 1 7 8 inches using 2 locking tabs. Replaces IHS226, AR369R, AD709R, AH83351, B824, 7A824, 161945A, 30-3049558. (Part No: 23995DA)
$9.95 [Enlarge Picture]

Fuel Filter, In-Line, 1/4 inch
- Inlet 1 4, outlet 1 4, O.D. 1-29 32, length 4-1 16. (Part No: 6511393)
$6.92 [Enlarge Picture]

Fuel Filter, In-Line, 3/8 inch
- Inlet 3 8, outlet 3 8, O.D. 1-29 32, length 3-7 8. (Part No: BF836)
$6.28 [Enlarge Picture]

Fuel Filter, In-Line, 5/16 inch
- Inlet 5 16, outlet 5 16, O.D. 1-29 32, length 4-5 32. (Part No: BF840)
$6.22 [Enlarge Picture]

Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$29.99 [Enlarge Picture]

Fuel Tank Liner Kit
- Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$65.00 [Enlarge Picture]

Fuel Tank Repair Kit
- Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3 8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180)
$27.62 [Enlarge Picture]

Fuel Tank Webbing, 3 Ft
- Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494)
$8.38 [Enlarge Picture]

Lucas Fuel Treatment (quart)
- Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$9.97 [Enlarge Picture]

Main Fuel Valve
- Replaces Fuel Solenoid for International Carburetors. These fuel solenoids are very unreliable and can easily be replaced with this manual valve. Contains valve, graphite packing and packing nut. Will not fit Marvel carburetors. If you need for a Marvel, call 800-853-2651 to check availability and pricing. (Part No: 47404DASSY)
$27.50 [Enlarge Picture]

Pre-Cleaner Assembly
- Complete, glass dust bowl assembly, 1-3 8" I.D. base, just like the original. For models A, Cub, B, Super A (to SN# 355669). (Part No: 356254R91)
$87.50 [Enlarge Picture]

Pre-Cleaner Assembly - Complete, glass dust bowl assembly, 1- 3 4" I.D. base, just like the original. For models A, Cub, B, Super A, 100, 130, 140, Super C, 200, 230, 240, 340. (Part No: 352612R9)$49.00

Pre-Cleaner Bowl - Glass bowl for pre-cleaner assembly 335261R91, 356254R91. (Just like the original). Tractors: Super A (SN# 356001 & up), Super A-1, C, Super C, 100. 130, 140, 200, 230, 240, 340, A, Cub, B, Super A (up to SN# 355669). (Part No: 64178D)$25.22

Sediment Bowl Assembly
- For Cub, Cub Lo-Boy, A, B, Super A, AV AI, AV1, C, Super C, 100, 130, 140, 154, 184, 185, 184 Cub, Cub 185 Lo-Boy, 230, 2400A, 2404, 2500A, 2504, 2606, 2656, 340, 404, 454, 460, 464, 504, 574, 606, 656, 674, 884. Fuel Strainer Assembly with 3 8" pipe connection to tank, 1 8" pipe outlet. Replaces 38465D. (Part No: 61782C91)
$28.04 [Enlarge Picture]

Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1 8" diameter, 2.150" O.D., Made in the USA. (Part No: C1778R)
$1.50 [Enlarge Picture]

Throttle Shaft
- For models Cub, Cub Lo-Boy. (Part No: 351845R11)
$21.14 [Enlarge Picture]

 
Gaskets
Gasket Material, Cork Rubber
- 3 32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR332)
$10.95 [Enlarge Picture]

Gasket Material, Cork Rubber
- 1 16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116)
$13.75 [Enlarge Picture]

Gasket Material, Exhaust Manifold
- 1 16" thick x 12" wide x 28-1 2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$19.95 [Enlarge Picture]

Gasket Paper, .0160
- .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$14.90 [Enlarge Picture]

Gasket Paper, .0275
- .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$22.90 [Enlarge Picture]

 
Gauges
Ammeter Assembly
- (30-0-30) 2" body dia. Replaces, 393334R91, 354473R91, 360053R91, 378424R91. For models 140 SN# 57724>, 2400A, 2500A, 454, 464, 574, 674, Cub SN# 248125>, Cub 184. (Part No: 536229R1)
$8.98 [Enlarge Picture]

Amp Gauge - With IH logo. 60-0-60. Black face with chrome bezel. (Part No: IHS1837)$27.95

Amp Gauge
- D-O-C Style - with IH Logo For Super A, Super C, H, Super H, M, Super M, Super MTA, Cub (From 1955), W4, W6, 200, 230, 240, 300, 350, 400, 450. Replaces 393334R91, 378424R91, 360053R92, IHS395. (Part No: 360053R91)
$16.50 [Enlarge Picture]

Amp gauge
- Gauge, ammeter has 20-0-20 range. Original style with IH logo. Fits 2" dia. hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418. (Part No: 354473R91)
$26.50 [Enlarge Picture]

Hour Meter
- DC voltages from 12V thru 36V nominal. Heavy duty glass-reinforced polyester body. Internal shock shields & grommets protect movement from shock & vibration damage. Fits 2-1 4" opening, three(3) mounting screws with nuts and two(2) blade terminals included. (Part No: HM771)
$43.69 [Enlarge Picture]

Hourmeter, Analog
- 2", black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40 [Enlarge Picture]

Oil Gauge
- For all IHC and Farmall tractors up to 1946. Oil Pressure Gauge with color read (no numbers on face). IHC LOGO on face. (Part No: 43987DB)
$66.35 [Enlarge Picture]

Oil Gauge
- For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH LOGO on face. (Part No: 41934DB)
$60.84 [Enlarge Picture]

Oil Gauge Copper Line Kit
- Universal, for tractors using 1 8 x 6 ft. copper oil line. Includes 6 Ft 1 8 Line, 2 x 5 16 -24 UNF Nuts, 2x Compression sleeves, and a 1 8-27 NPTF Female to 5 16-24 UNF male adapter. (Part No: UNI523)
$22.75 [Enlarge Picture]

Oil Gauge Valve
- Oil level indicator (petcock). For all tractors with a 3 8" thread. Oil Gauge Valve for oil pan. (Part No: 1998TAOE)
$14.50 [Enlarge Picture]

Oil Gauge, Engine Mount
- For Cub, Cub Lo-Boy, Super A, AV C, Super C, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400. Oil Pressure Gauge, 0 to 75 psi. 2" IH logo on face. Does Not come with bracket to mount in dash- screw in engine mount. (Part No: 364665R91)
$54.62 [Enlarge Picture]

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1 8" pipe thread to 1 8" tube. Brass. (Part No: 919095)$14.35

Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1 8" pipe thread to 1 4" tube. Brass. (Part No: IHS626)
$14.35 [Enlarge Picture]

Oil Pressure Gauge
- Universal Complete assembly with oil tube and mounting hardware, Lighted. 80 psi. Line uses 1 4 inch connection with adapters for 3 8 and 1 2 inch. (Part No: SSW0002)
$15.95 [Enlarge Picture]

Temperature Gauge
- Universal water Temperature gauge(0-280 degree scale). Fits model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1 2 inch or 3 4 male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.85 [Enlarge Picture]

Temperature Gauge, Universal
- For 2" mounting hole. Complete assembly with bracket and adapters for block. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77" capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$25.30 [Enlarge Picture]

 
Hitch / Drawbar
Center tube, Stablizer
- Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)
$17.62 [Enlarge Picture]

Check Chain & Pin Kit
- Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A)
$7.96 [Enlarge Picture]

Conversion Tong
- Two Point Conversion Tong Straight Left Hand Tong With Combination Cat. I & Cat. II Ball For Converting IHC Two Point Fast Hitch To Three Point. About 28 inch overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH1447)
$171.07 [Enlarge Picture]

Conversion Tong
- Two Point Conversion Tong Straight Right Hand Tong With Combination Cat. I & Cat. II Ball For Converting IHC Two Point Fast Hitch To Three Point. About 28 inch overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH1448)
$171.07 [Enlarge Picture]

Conversion Tong
- Two Point Conversion Tong Bent Type, Left Hand Tong With Combination Cat. I & Cat. II Ball For Converting IHC Two Point Fast Hitch To Three Point.About 32 inch overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH14416)
$180.78 [Enlarge Picture]

Conversion Tong
- Two Point Conversion Tong Bent Type, Right Hand Tong With Combination Cat. I & Cat. II Ball For Converting IHC Two Point Fast Hitch To Three Point. About 32 inch overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH14417)
$180.78 [Enlarge Picture]

HAIR PIN ASSORTMENT
- 15-piece assortment. Includes four(4) of HP-3 (wire dia 3 16, length 3.75), four(4) of HP-4 (wire dia 5 32, length 2 15 16), four(4) of HP-5 (wire dia 1 8, length 2 9 16), and three(3) of HP-6 (wire dia 3 32, length 1 5 8). (Part No: HPA15X)
$6.94 [Enlarge Picture]

HITCH BALL 10000LB 2-5/16
- 2-5 16 BALL SIZE, 1-1 4STUD THREAD, 2-1 2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85 [Enlarge Picture]

HITCH BALL 15000LB 2-5/16
- 2-5 16 BALL SIZE, 1-3 8STUD THREAD, 2-5 8 STUD LENGTH, 15000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)
$23.40 [Enlarge Picture]

HITCH BALL 2000LB
- 1-7 8 BALL SIZE, 3 4 STUD THREAD, 1-3 4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)
$12.30 [Enlarge Picture]

HITCH BALL 3500LB
- Hitch ball. 2" ball size, 3 4" stud thread, 1-7 8" stud length, 3500 lb. max load capacity, one two chrome hitch ball class. (Part No: CHB234)
$12.64 [Enlarge Picture]

HITCH BALL 5000LB
- Hitch ball. 2" ball size, 1" stud thread, 2-1 8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$14.44 [Enlarge Picture]

HITCH BALL 5000LB 2-5/16
- Hitch Ball, 2-5 16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$20.52 [Enlarge Picture]

Hair Pin Cotter Assortment
- Hair Clips sizes from 1 16 x 1 3 8 to 3 16 x 3 1 4. Total of 141 pieces in 6 sizes. (Part No: B1SB16)
$29.52 [Enlarge Picture]

LINCH PIN
- Package of 10 linch pins. Pin diameter 1 4 inch, useable length 1 1 4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$4.90 [Enlarge Picture]

LINCH PIN
- Package of 10 linch pins. Pin diameter 5 16 inch, useable length 1 1 4 inch, Ring diameter 1 5 8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516)
$4.00 [Enlarge Picture]

LINCH PIN
- Package of 10 linch pins. 7 16" dia. pin x 1-3 4" useable length, 1-5 8" dia. ring. Enter 1 for package of 10. (Part No: DKLP91)
$3.90 [Enlarge Picture]

LINCH PIN
- LINCH PIN Package of 10 linch pins. 3 16" O.D. pin x 1-1 4" Long.***Enter 1 for package of 10** (Part No: DKP316)
$3.90 [Enlarge Picture]

Lower Latch Spring - Used with 393500R1 Latch. Replaces OEM 522840Ra. For models 21026, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Cub, Cub Lo-Boy, Hydro 100, Hydro 70, Hydro 86, 100, 1026, 1206, 130. (Part No: 522840R2)$8.25

Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7 8" mounting pins and adapter bushings, 27-1 4" width, 3-1 2"x 3-1 2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$284.34 [Enlarge Picture]

Universal Drawbar Lock
- For CAT I drawbars only (drawbars that are 1" thick x 2-1 2" width) . Prevents drawbar from rotating. (Part No: 49A29)
$26.72 [Enlarge Picture]

Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1 2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$27.98 [Enlarge Picture]

Universal Stabilizer Chain Kit
- Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch - usually used on larger tractors - VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. (Part No: SK102CH)
$47.67 [Enlarge Picture]

 
Hydraulic System
Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Parts)$00.00

Hydraulic Pump
- Fits on models Cub and Cub Lo-Boy. (Part No: 352035R94)
$516.10 [Enlarge Picture]

 
Implements
AXLE BOLT
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$18.22 [Enlarge Picture]

AXLE BOLT
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$18.22 [Enlarge Picture]

AXLE NUTS (5)
- 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.58 [Enlarge Picture]

BLADE BOLT KIT
- For rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1 8-12 inch, B = 3 1 2 inch, C = 1 3 8 inch, D = 1 inch, E = 9 16 inch, F = 1 2 inch, G = 2 1 2 inch, H = 1.492 (for 1 1 2 Blade Hole), I = 1.12 inches. Contains (BH2500) hardware for 2 blades. (Part No: 63607)
$16.66 [Enlarge Picture]

Bearing Cup
- This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$2.50 [Enlarge Picture]

Bearing cone (L44643)
- For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$8.28 [Enlarge Picture]

Bush Hog Axle Spacer Bushing
- Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40)
$6.44 [Enlarge Picture]

Caster Assembly
- Tail wheel & hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1 2" diameter, 8" overall length, 7-1 4" to pin hole. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$172.49 [Enlarge Picture]

Caster Assembly, Old Style
- Tail wheel & hub assembly with grease fitting. 4 x 8 inch rim, 15 inch O.D. of wheel. Includes Wheel, Hub, Axle Bearing, and Bolt Assembly.OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215)
$103.86 [Enlarge Picture]

Fertilizer Hopper Assembly
- For one row side dresser. Made with extremely durable, tough plastic that will not rust like the original! The base is cast iron with new gears. Must have a side dresser to accommodate this fertilizer hopper. Note, does not include adjustable quadrant. 10" casting diameter. You must have the side dresser attachment to bolt this hopper to. For models Cub, Super A, Super C, 100, 130, 140, 200, 230, 240. Replaces 626461R91 and 620720R91. (Part No: 626461R91)
$336.15 [Enlarge Picture]

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)$27.92

HUB with BRG CUPS
- 4-bolt, 5" bolt circle & 3-5 8" wheel pivot hub with bearing cups (1" axel)(Ref #5). This part fits Caster Assembly (Part Number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1311)
$44.15 [Enlarge Picture]

Hub Assembly
- Hub with bushings (3 4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 with new style 1-1 4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$34.53 [Enlarge Picture]

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)$40.23

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)$40.23

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)$75.38

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)$95.34

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)$98.19

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163)$107.04

Seal, Caster
- Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.20 [Enlarge Picture]

Tail Wheel Assembly
- 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1 2" bolt circle. 5-1 4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$125.98 [Enlarge Picture]

Tail Wheel Assembly
- 4" x 8" tail wheel assembly with laminated tire. 3-5 8" pilot, 4 bolt holes, 5" bolt circle, 3-3 4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH)
$42.90 [Enlarge Picture]

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)$21.27

 
Lights
Halogen Work Light-Double Bulb
- 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$48.63 [Enlarge Picture]

Headlamp Assembly, Flat Back, 12 Volt
- For Farmall Cub, Cub Lo-Boy, C, Super C After 159455, M, MV, MD, MDV, MTA, Super MD, Super MDV. Also for Model 100, 130, 140, 200, 230, 240, 300, 350 Utility, 330, 340, 400, 450. Replaces OEM# 357884R94. Flat-Back (not teardrop) Primered red. Price is for one complete headlamp assembly. (Part No: 357884R91-12V)
$41.33 [Enlarge Picture]

Headlamp Assembly, Flat Back- 6 Volt
- For Farmall Cub, Cub Lo-Boy, C, Super C After SN# 159455, M, MV, MD, MDV, MTA, Super MD, Super MDV, Also for Model 100, 130, 140, 200, 230, 240, 300, 350 Utility, 330, 340, 400, 450. Replaces OEM# 357884R94. Flat-Back (not teardrop) Primered red. Price is for one complete headlamp assembly. (Part No: 357884R91-6V)
$41.33 [Enlarge Picture]

Headlamp Assembly, Tear-Drop- 12 Volt
- Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Tear-Drop vs. Flat-Back) before ordering. (Part No: 45640DB-12V)
$42.90 [Enlarge Picture]

Headlamp Assembly, Tear-Drop- 6 Volt
- Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Tear-Drop vs. Flat-Back) before ordering. (Part No: 45640DB)
$42.90 [Enlarge Picture]

Headlamp Assembly, Tear-Drop- 6Volt
- Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5 inches in diameter. Price is for one headlamp assembly. Does not include mounting bracket. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W4, Super W6, Super A, W4, W6, W9, WD6, WD9. Verify your configuration (Tear-Drop vs. Flat-Back) before ordering. (Part No: 45640DB)
$42.90 [Enlarge Picture]

Headlamp, Lens, Red - For model s, 100, 130, 140, 200, 230, 240, 300, 350, Farmall 300, 350 Utility, 330, 340, IH & Utility 240, 400, 450, Farmall Cub, Cub Lo-Boy, Farmall C, M, MV, MD, MDV, Super MD, Super MDV. (Part No: 357884R94)$15.60

Headlight Lens
- Replacement Glass Lens is 4.75 inch outside diameter for IH (45640DB) Headlight Assemblies. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, W4, W6, W9, WD6, WD9. (Part No: GC200)
$13.66 [Enlarge Picture]

Headlight Lens Gasket
- Gasket, 4 5 8 outside diameter for lens in sealed beam units 358890R92. For models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: 358892R91)
$6.74 [Enlarge Picture]

Headlight Reflector - 4 inch
- This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: S.02377)
$11.52 [Enlarge Picture]

Headlight Trim Ring
- Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 53525DA)
$19.00 [Enlarge Picture]

Knob
- Knob for combination rear light and tail light switch(used only with switch body with 15 32 shaft). For models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Part No: 359773R91)
$11.00 [Enlarge Picture]

Light Bracket
- For models Cub, Cub Lo-Boy. Rear light bracket. (Part No: 352121R11)
$23.07 [Enlarge Picture]

Light Bulb, Sealed Beam, 12 Volt
- Bulb is 4-1 2" diameter. (Part No: 373662R91)
$11.30 [Enlarge Picture]

Light Bulb, Sealed Beam, 6 Volt
- 4-1 2" #4511. (Part No: 373661R91)
$15.16 [Enlarge Picture]

Light Clamp
- Clamp, lamp assembly for tractors. For models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W6, Super A, W4, W6, W9, WD6, WD9. (Part No: 350920R1)
$10.64 [Enlarge Picture]

Light Switch, 12 Volt
- 4 position with Old style knob, replaces cut out switch when converted to regulator. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5362)
$46.04 [Enlarge Picture]

Light Switch, 12 Volt
- 3 position with Old style knob, with regulator only. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5364)
$45.35 [Enlarge Picture]

Light Switch, 12 Volt
- 4 position with new style knob. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5366)
$46.04 [Enlarge Picture]

Light Switch, 12 Volt - 3 position with new style knob. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5368)$46.04

Light Switch, 6 Volt
- 4 position with Old style knob, replaces cut out switch when converted to regulator. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5361)
$46.04 [Enlarge Picture]

Light Switch, 6 Volt
- 3 position with Old style knob, with regulator only. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5363)
$44.50 [Enlarge Picture]

Light Switch, 6 Volt
- 4 position with new style knob. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5365)
$46.04 [Enlarge Picture]

Light Switch, 6 Volt - 3 position with new style knob. For models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5367)$46.04

Magnetic worklight Universal Mounting.
- Can be placed anywhere there is a metal surface. 3-1 2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG)
$41.70 [Enlarge Picture]

Portable Halogen Work Lamp
- 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH)
$72.05 [Enlarge Picture]

Rear Combo Light
- 6 Volt Rear Combo Light Assembly with Red Jewel Light with rotary switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. Replaces 355914R91. (Part No: 355911R91)
$62.05 [Enlarge Picture]

Safety Light Amber
- 12 volt Amber Safety Light, 4 and a 1 4 dia., 3 8Dia by 5 8 mounting Stud.Does not include Flasher. (Part No: S.61357)
$23.90 [Enlarge Picture]

Sealed Beam Bulb, Red & White
- 4.5" dia. For models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. (Part No: 371461R92)
$26.98 [Enlarge Picture]

Switch, Light
- Fits Cub (SN: 224401 >, Cub Lo-Boy (SN: 18701 >), Cub 154 Lo-Boy, Cub 185 Lo-Boy, 140 (SN: 26801 - 57723, with GENERATOR, 140 (SN: 57724 >, with ALTERNATOR), 184, 354, 4100, 4156, 444, 454, 464 (SN: < 109150), 574 (SN: < 114908), 674 (SN: < 108104), 2300, 2444, 2500 (SN: < 114908). (Part No: 376851R92)
$32.50 [Enlarge Picture]

Switch, Light, with Knob
- Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$19.56 [Enlarge Picture]

Switch, Worklight, with Knob
- For models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. Replaces 359682R91. (Part No: 375653R92)
$19.56 [Enlarge Picture]

Tail Light Lens
- 5 Inch Lens, combination rear light and tail light. For 100, 130, 200, 230, 300, 340, 350, A, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A (Part No: 350478R1)
$24.66 [Enlarge Picture]

Universal 9 Inch Headlight - 12 Volt off-road 100w Q. Halogen large headlight. Black. Single bolt mount. (Part No: B1585)$61.13

Work Lamp, HID, Flood Light
- Universal high intensity discharge flood light, 35W Xenon H3 lamp, size 4.725" W X 4.330" H X 5.512" L, internal ballast, hardened glass lens, far longer life span than halogen 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$120.44 [Enlarge Picture]

Work Light 12V With Switch
- Work light, 12 volt, 3000 candle power, trapezoidal light pattern. On-off switch on back of light housing. Uses 4-1 2" diameter sealed beam lamp, L4411. (Part No: L408-12V)
$28.08 [Enlarge Picture]

Worklight 12 Volt
- Red 12 Volt worklight with handle, on off switch, swivels and rotates. (Part No: S.42792)
$29.93 [Enlarge Picture]

Worklight 12 Volt Black
- 12 Volt worklight with handle, on off switch, swivels and rotates. Mounting Holes measure 4 3.8 center to center. (Part No: S.67771)
$31.65 [Enlarge Picture]

 
Miscellaneous
Cab Foam Kit
- With Headliner 7-Piece - Black For Tractors with 1300 Series Hiniker Cab (Part No: R1220)
$349.22 [Enlarge Picture]

Cab Foam Kit
- With Headliner 10-Piece - Black For models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R1236)
$330.43 [Enlarge Picture]

CabCAM Camera Observation System
- When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof Extension Cables. (Part No: CC7M1C)
$339.62 [Enlarge Picture]

Canopy
- 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$402.16 [Enlarge Picture]

Canopy Mounting Kit, 2 Post
- Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603)
$70.84 [Enlarge Picture]

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604)$61.16

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602)$103.07

Canopy, Small Tractors
- 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$350.00 [Enlarge Picture]

Deluxe Canopy, 3 Bow
- Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R)
$220.12 [Enlarge Picture]

Deluxe Tractor Umbrella
- Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X)
$145.07 [Enlarge Picture]

HAND CLEANER GALLON
- Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$24.48 [Enlarge Picture]

 
Oil System
Lucas Heavy Duty Oil Stabilizer (quart)
- A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001)
$12.93 [Enlarge Picture]

Oil Filter Element Type
- For models Cub, Cub Lo-Boy ALL with 60 GAS ENGINE. Overall length of 4 1 2 inches, diameter of 2 1 4 inches. (Part No: 376373R91)
$10.08 [Enlarge Picture]

Oil Filters, Tri Pack
- Three pack of oil filters. For models Cub, Cub Lo-Boy ALL with 60 GAS ENGINE. Overall length of 4 1 2 inches, diameter of 2 1 4 inches. (Part No: 376373R91TRIPAC)
$22.46 [Enlarge Picture]

 
PTO / Driveline
Driveline Assembly
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3 8 inch 6 spline Q.D. tractor and implement yokes. 1333mm (52-1 2 inch) overall length, end of yoke to end of yoke. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit is 27mm 1.063 (1-1 16) bearing diameter x 74.6mm 2.940 (2-15 16). 1333mm (52-1 2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$164.92 [Enlarge Picture]

Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor & implement yokes. 1-3 8 6 spline Q.D. tractor yoke. 1-3 8 round bore with 1 2 pin hole implement yoke. 1300mm - (51 inch) overall length end of yoke to end of yoke. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit, 27mm - 1.063 (1-1 16) bearing dia. x 74.6mm - 2.940 (2-15 16) overall length (43-3 4) . Verify length before ordering. (Part No: AB4111WY)
$183.74 [Enlarge Picture]

Driveline Assembly with Yokes
- AB4 series. Complete drive shaft assembly with shielding and tractor & implement yokes. 1-3 8 inch 6 spline Q.D. tractor yoke. 1-1 4 round bore with pin hole implement yoke. 1350mm (53) overall compressed length end of yoke to end of yoke. Cross and bearing kit, 27mm - 1.063 (1-1 16) bearing dia. x 74.6mm - 2.940 (2-15 16). Overall length 1350mm (53) ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY125R)
$181.20 [Enlarge Picture]

Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3 8 - 6 spline Q.D. tractor yoke, 1-3 8 - 6 spline ratcheting torque limiter iwth quick disconnect on implement end. 1372mm (54 inch) overall length end of yoke to end of clutch. 1110mm (43-3 4) compressed length center to center of cross bore. Cross and bearing kit 27mm -1.063 (1-1 16) earing dia. x 74.6mm - 2.940 (2-15 16). 1372mm (54) overall length ***VERIFY LENGTH BEFORE (Part No: AB4111K33)
$278.82 [Enlarge Picture]

PTO Adapter - PTO adapters are located under the PTO category in the Accessories & Universal Parts section. (Part No: MISC)$0.00

PTO Safety Clutch, 40 HP
- 1-3 8" 6 spline male and female ends, 6" dia., 40 HP capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$210.57 [Enlarge Picture]

PTO Seal - For Cub, Cub Lo-Boy. (Part No: 126107C1)$11.16

PTO Shaft
- For Cub, Cub Lo-Boy. PTO Shaft 10 6 spline, 11.54" long. (Part No: 351269R4)
$71.63 [Enlarge Picture]

PTO Shift Collar
- For Cub, Cub Lo-Boy. Collar has 6 spline, spline diameter of 13 16 inches, outside diameter 1 7 8 inches, and length of 1 3 8 inches. (Part No: 351286R2)
$66.37 [Enlarge Picture]

PTO Shift Lever Guide
- For models Cub, Cub Lo-Boy. (Part No: 351967R1)
$5.00 [Enlarge Picture]

PTO Shift Lever and Shaft
- Replaces 351287R11 shaft, 351970R31 lever, 351968R1 collar & 351969R1 spring. For models Cub, Cub Lo-Boy. (Part No: 351287R11)
$34.95 [Enlarge Picture]

PTO Shifter Rod Assembly
- For models Cub, Cub Lo-Boy. (Part No: 351970R31)
$25.12 [Enlarge Picture]

 
Paint
44 Minute DVD - How to Paint a Tractor
- This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$24.00 [Enlarge Picture]

Acrylic Hardener, 16oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 1 to 2 gallons of unreduced paint. (Part No: TP12P)$44.60

Acrylic Hardener, 8oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 2 quarts to 1 gallon of unreduced paint. (Part No: TP12HP)$27.96

Dakota Prep, 1 Gallon
- Dakota Prep is a water-based and biodegradable cleaner that will remove wax buildup, grease, oxidation and grime from a variety of surfaces to renew paint to its previous luster. It is safe on many surfaces including painted surfaces, decals vinyl lettering, plastics, fiberglass, clear coat finishes, aluminum, glass and rubber. (Part No: DP1G)
$83.37 [Enlarge Picture]

Dakota Shine, 1 Gallon
- Dakota Shine is a unique and patented product that will restore the color, lustre and value to faded and oxidized surfaces like paint, decals, plastics, fiberglass, engine compartments and more. The ingredients are designed to penetrate the surface to rejuvinate the pigments to their original, lime-new appearance. No mixing required, quick dry time and no overspray lines to buff out. Used in conjunction with Dakota prep for best results. (Part No: DS1G)
$138.26 [Enlarge Picture]

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL)$42.53

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT)$24.74

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP)$42.52

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL)$71.91

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447QT)$29.91

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447SP)$51.68

Paint, Cub Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. This is a special order item please allow up to two weeks for delivery. (Part No: TP915SP)$41.34

Paint, Farmall Red, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP110GAL)$42.24

Paint, Farmall Red, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP110QT)$24.74

Paint, Farmall Red, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP110SP)$42.52

Paint, Gloss Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550GAL)$42.24

Paint, Gloss Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550SP)$42.52

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700GAL)$42.24

Paint, Gray Primer, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700QT)$18.69

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700SP)$42.61

Paint, IH Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.q (Part No: TP910GAL)$49.97

Paint, IH Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP910QT)$23.73

Paint, IH Blue, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP910SP)$39.87

Paint, IH Red, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP905GAL)$42.53

Paint, IH Red, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP905QT)$24.74

Paint, IH Red, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP905SP)$42.52

Paint, McCormick Deering Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP450GAL)$68.99

Paint, McCormick Deering Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP450QT)$30.40

Paint, McCormick Deering Gray, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP450SP)$51.18

Paint, Non Glare Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP120GAL)$45.40

Paint, Non Glare Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP120QT)$27.98

Paint, Non Glare Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP120SP)$42.52

Paint, Off White, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP900GAL)$43.85

Paint, Off White, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP900QT)$24.74

Paint, Off White, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP900SP)$42.52

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL)$45.50

Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225QT)$25.92

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225SP)$42.52

Paint, Soft Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200GAL)$53.93

Paint, Soft Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200SP)$42.52

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)$65.92

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)$27.81

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT)$95.63

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q)$21.00

Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$39.95 [Enlarge Picture]

 
Seats
Pan Seat 4-Bolt Mount
- Pan Seat with Silver padded canvas. Center brass drain hole over metal pan seat frame. For: C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 3 50, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R0906)
$160.89 [Enlarge Picture]

Pan Seat 4-Bolt Mount
- Pan Seat with a RED AND WHITE VINYL Cover. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: 357518R91)
$129.95 [Enlarge Picture]

Pan Seat 4-Bolt Mount
- BLACK VINYL padded cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R0903)
$149.93 [Enlarge Picture]

Pan Seat 4-Bolt Mount
- SILVER Canvas cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R1113)
$138.59 [Enlarge Picture]

Pan Seat 4-Bolt Mount with Brass Drain Hole - Red & White Vinyl with Brass Drain Hole with 4-Bolt.For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R0905)$160.89

Pan Seat, Universal
- 17 inch wide Gold zinc plated, 3-1 2" center to center on mounting holes, 1 2" by 1 2" center square. (Part No: B1865)
$37.24 [Enlarge Picture]

Seat Back
- Silver Canvas on Wood For A, Super A, B, Cub, Cub Lo-Boy, F100, F130, F140, F203, F303, F315 (Part No: R3656)
$41.47 [Enlarge Picture]

Seat Belt
- Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22)
$75.84 [Enlarge Picture]

Seat Belt, Universal - Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT)$23.10

Seat Bottom
- Silver Canvas on Wood For A, Super A, B, Cub, Cub Lo-Boy, F100, F130, F140, F203, F303, F315 (Part No: R3655)
$56.77 [Enlarge Picture]

Seat Cushion, Back, Black
- 6 INCHES, BLK VINYL. Fits Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 220, 100, 130, 140, 203, 300, 303, 315, 330 UTIILITY, 350, 403, 460, 503 2429>, A, ALL COTTON PICKERS, B, Super A, 212 IND CONST. (Part No: 363219R91-1)
$38.02 [Enlarge Picture]

Seat Cushion, Base, Black
- Wood Base, Black Vinyl. Fits Cub, Cub 154 Lo-Boy, 220, 100, 130, 140, 203, 300, 303, 315, 330 UTIILITY, 350, 403, 460, 503 2429>, A, ALL COTTON PICKERS, B, Super A, 212 IND CONST. (Part No: 363220R91-1)
$57.68 [Enlarge Picture]

Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1294.75 [Enlarge Picture]

Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1294.75 [Enlarge Picture]

Seat, Air Suspension, Cloth, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056)
$1405.98 [Enlarge Picture]

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3 4" D). Fits several Commercial Turf Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)$98.77

Seat, Universal
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. (Part No: TS1050ATSP)
$101.46 [Enlarge Picture]

Seat, Universal
- BLUE Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. (Part No: TS1060ATSP)
$93.40 [Enlarge Picture]

Seat, Universal
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$93.40 [Enlarge Picture]

Seat, Universal - Seat assembly, Black leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before purchasing. Weight 33 lbs. (Part No: TS1110BK)$106.23

Seat, Universal - Seat assembly, Blue leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BL)$109.62

Seat, Universal - Seat assembly, Yellow leatherette upholstery, Dimensions: 18-3 4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward rear adjustment (Slide track 9 inches W x 11-1 4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110YL)$106.23

Seat, Universal INDUSTRIAL with SLIDES
- Seat, universal, non-suspension style seat assembly with slide track for forward rear adjustment. Slotted base for adjusting slide tracks side to side 4" to 10-1 4". Black leatherette upholstery, vacuum formed and watertight for use in all weather conditions. (Part No: TS1036IND)
$70.15 [Enlarge Picture]

Tie-On Seat Cover
- Grey & Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Part No: R2599)
$30.00 [Enlarge Picture]

Tie-On Seat Cover
- Red & White, 21" wide. Deluxe with 2 inches of foam. (Part No: R1015)
$30.00 [Enlarge Picture]

Universal Seat
- Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015)
$172.58 [Enlarge Picture]

Universal Seat
- **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Part No: TS1040ATSP)
$97.65 [Enlarge Picture]

 
Sheet Metal / Body Parts
2 Hour DVD - The How To's of Sheetmetal Repair
- This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$24.00 [Enlarge Picture]

Battery Box - For models Cub, Cub Lo-Boy. Complete Battery Box with lid hold downs and wing nuts. Restoration Quality. (Part No: 538609R2)$98.50

Battery Box Front Cover
- For Cub, Cub Lo-Boy. Battery Box Front Cover. Restoration Quality. (Part No: 351334R1)
$29.95 [Enlarge Picture]

Battery Box Top Cover
- For Cub to SN# 224400, Cub Lo-Boy to SN# 18700. Battery Box Top Cover Assembly (Part No: 351336R91)
$50.11 [Enlarge Picture]

Battery Hold Down Rubber - 3 4" tall, inserts into the retainers in the battery box lid. For models Cub, Cub Lo-Boy, A, AV, B, (BN, C 51690D), AI, H, HV, M, MV, MD, MDV, W6, W9, WD6, Super A, Super C, Super H, Super HV, Super M, Super MTA, Super W6, 100, 130, 140, 200, 230, 600, 650. (Part No: R5103)$6.00

Cab Foam Kit Spray Adhesive
- 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140)
$30.09 [Enlarge Picture]

DZUS Fasteners Kit
- Universal Set of 5 fasteners. 1 4 Turn Fasteners. For 13 32 inch holes, Head Diameter is 11 16, springs are 1 7 8 inch in length. Verify size before ordering. (Part No: DZUS2)
$16.00 [Enlarge Picture]

Fender, RH/LH
- Left and right are the same, sold individually. For models Cub, Cub Lo-Boy. (Part No: 350961R12)
$110.36 [Enlarge Picture]

Front Bar Grill with Screen - For Cub SN# 185001-210000, Cub Lo-Boy up to SN# 10000. (Part No: 362372R11)$224.95

Grill - 4 Bar Grill with Screen for Cub SN# 210001-222500 and Lo-Boy SN# 10001-17200. THIS IS NEW OLD STOCK AND WILL REQUIRE SANDING, PRIME AND PAINT. Limited to stock on hand. (Part No: 368673R1)$250.00

Pilot Punch Set
- Set contains 12 sizes one of each 1 16, 3 32, 1 8, 5 32, 3 16, 7 32, 1 4, 5 16, 3 8, 7 16, and 1 2. (Part No: RPD112K)
$138.96 [Enlarge Picture]

Tool Box - For Late Cub with Deluxe Seat and Lo-Boy. (Part No: 364072R91)$29.50

Tool Box
- Universal Tool Box 15 1 2" X 4 3 4" X 4 1 4". Painted Red. (Part No: R2685)
$29.40 [Enlarge Picture]

Tool Box, Fender Mount
- This is an aftermarket toolbox designed to mount easily on the fender of most agricultural and industrial tractors. This is an aftermarket item, unlike any original toolboxes, and is meant for working tractors in need of a good toolbox. 18 inches long, 3-5 8" wide and 4-1 2" deep. (Part No: TB100FM)
$43.86 [Enlarge Picture]

Toolbox - Universal style of 11 inches long, 4 inches wide and 4.5 inches tall. Must drill mounting holes to match your tractor. (Part No: ABC308)$37.50

 
Steering
Spindle - Right Hand
- For Cub, Cub Lo-Boy. Spindle - Right. (Part No: 364010R92)
$146.08 [Enlarge Picture]

Spindle, LH
- For models Cub, Cub Lo-Boy. (Part No: 364009R92)
$161.34 [Enlarge Picture]

Steering Shaft Support Knuckle - For models Cub, Cub Lo-Boy. (Part No: 350902R3)$32.43

Steering Wheel
- 14-3 4" diameter, 3 4" hub, for keyed shaft. For Cub, A & Super A to SN# 355669, B & C to SN# 75097. Bare Metal Spokes. (Part No: 60069D-OE)
$32.84 [Enlarge Picture]

Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$10.00 [Enlarge Picture]

Steering Wheel Spinner, Black
- Comes with mounting hardware. (Part No: R3276)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$11.70 [Enlarge Picture]

Steering Wheel Spinner, Yellow
- Comes with mounting hardware. (Part No: R3280)
$11.70 [Enlarge Picture]

 
Tools
*Combination Wrench Set
- 22 pieces SAE Metric. Polished chrome vanadium steel. Metric: 9, thru 19 mm. SAE: 1 4 thru 7 8. Comes with a durable plastic rack for handy storage. LIFE TIME UNLIMITED WARRANTY. (Part No: W1069)
$29.99 [Enlarge Picture]

Adjustable Cylinder Hone Replacement Stones, Coarse
- Set of three 4" coarse textured stones with cotter pins for 900542 cylinder hone. (Part No: 900563)
$17.48 [Enlarge Picture]

Adjustable Cylinder Hone Replacement Stones, Fine
- Set of three 4" fine textured stones with cotter pins for 900542 cylinder hone. (Part No: 900556)
$17.48 [Enlarge Picture]

Adjustable Cylinder Hone Replacement Stones, Medium
- Set of three 4" medium textured stones with cotter pins for 900542 cylinder hone. (Part No: 900549)
$17.48 [Enlarge Picture]

Adjustable Engine Cylinder Hone
- Resurfaces cylinder walls so new rings will seat and eliminate minor cylinder wall imperfections. 2" to 7" diameter range with adjustable tension settings to control the cutting action. Features flexible shaft that will fit any variable speed drill and replaceable 4" stones. Medium texture stones included. Stone replacement part numbers are (900556)Fine textured stones, (900549) medium textured stones and (900563) coarse stones. (Part No: 900542)
$38.37 [Enlarge Picture]

Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)$19.95

Chain Binder
- 1 4" chain binder, 2600 pound load limit. (Part No: LL104)
$36.74 [Enlarge Picture]

Chain Binder
- 3 8" chain binder, 5400 pound load limt. Use with either 5 16" or 3 8" chain. (Part No: LL105)
$41.70 [Enlarge Picture]

Chain Binder
- 1 2" chain binder, 9200 pound load limit. Use with either 3 8" or 1 2" chain. (Part No: LL106)
$78.11 [Enlarge Picture]

Combination Wrench Set
- 11 pieces. Sae sizes 1 4 to 7 8. Chrome vanadium steel construction. Handy storage rack. LIFETIME UNCONDITIONAL WARRANTY. (Part No: W1061)
$21.00 [Enlarge Picture]

Compression Tester
- Checks cylinder compression up to 300 PSI. Fits 14 and 18mm spark plug threads. Equipped with air-hold valve and gauge reset button. 11 inch flexible rubber hose. Complete with instructions. (Part No: W80579)
$32.48 [Enlarge Picture]

Cotter Pin Assortment
- 150 Pieces. Contains sizes of 1 8x2, 5 32x2 1 2, 3 16 x 3, 1 4 x 2, 1 4 x 3, 5 16 x 2 1 2. All in a convenient re-sealable plastic case. (Part No: W5206)
$12.48 [Enlarge Picture]

Cotter Pin Assortment, Small
- 560 piece assortment of 1 16" x 1", 3 32" x 1", 3 32" x 1-1 2", 1 8" x 1-1 4", 1 8" x 2", 5 32" x 2-1 2" all in convenient re-sealable plastic case. (Part No: W5205)
$9.40 [Enlarge Picture]

Diesel Compression Test Kit
- Complete kit with case. 0 to 1000 PSI Gauge (0-700kPA). Includes 9 adapters for popular Domestic, Asian and European vehicles. Will fit the following thread sizes: 24 x 2.00, 12 x 1.25, 10 x 1.25, 10 x 1. Tests compresssion through both flow plug and injector holes. Gauge accuracy + - 2 percent. (Part No: W89731)
$59.95 [Enlarge Picture]

Digital Calipers, Stainless
- High quality hardened stainless steel digital caliper. calculates measurements up to 6" with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$36.11 [Enlarge Picture]

GREASE GUN
- GREASE GUN-Pistol handle grease gun uses standard 11" grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)
$28.88 [Enlarge Picture]

GREASE GUN
- Spring fed 11" barrel grease gun. Uses standard 11" grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080)
$26.74 [Enlarge Picture]

GREASE GUN
- HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142)
$35.16 [Enlarge Picture]

GREASE GUN CLAMP
- Clamp holds all 2-1 4" diameter barrel hand guns. Bolts or screws anywhere thru hole in bracket base. (Part No: GC102)
$12.44 [Enlarge Picture]

GREASE GUN POWERLUBER 14.4V BATTERY
- Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$109.95 [Enlarge Picture]

GREASE GUN POWERLUBER 14.4V with CASE 1 BAT
- Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)
$270.05 [Enlarge Picture]

GREASE GUN POWERLUBER 14.4V with CASE 2 BAT
- Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)
$376.87 [Enlarge Picture]

GREASE HOSE 12 INCH
- 12 flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G115)
$10.86 [Enlarge Picture]

GREASE HOSE 18 INCH
- 18" flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G118)
$9.90 [Enlarge Picture]

Hair Pin Assortment
- 150 pieces. Includes 6 different sizes from 1 3 16 Length to 2 15 16. All in a convenient re-sealable plastic case. (Part No: W5210)
$8.32 [Enlarge Picture]

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S.58474)$249.90

Hobby Tool Kit
- With Carrying Case. Complete Knife kit with two handle styles. Also comes with 3 inch caliper, tweezers, precision screwdriver and 28 blades. (Part No: W1709)
$23.74 [Enlarge Picture]

Hose Clamps Assortment
- 26 pieces. Includes sizes of: 5 8, 7 8, 1, 1 1 16, 1 1 4, 1 1 2 inch. All in a convenient re-sealable plastic case. (Part No: W5348)
$8.06 [Enlarge Picture]

MULTI TESTER
- Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420)
$24.76 [Enlarge Picture]

Main Seal Installer/Remover
- Removes and installs upper rear main seals on many engines without removing engine or crankshaft. Contains corkscrew removal tool, T-handle and wire with clip for pulling new seals into place, 2 extra clips. (Part No: W84019)
$7.10 [Enlarge Picture]

O-Ring Assortment
- 407 pieces. Includes 32 sizes from 1 4 O.D to 2 1 4 O.D. All in a convenient re-sealable plastic case. (Part No: W5202)
$16.36 [Enlarge Picture]

Piston Ring Compressor
- Use to install pistons. Positive compression and adjustable friction brake. Includes instructions. Band diameter from 3.5 to 7 inches (88 to 177mm). (Part No: W80573)
$18.12 [Enlarge Picture]

Piston Ring Groove Cleaner
- Cleans carbon and deposits from ring grooves. Includes two 5 cutter wheels for a total of 10 groove cleaning sizes: SAE: 1 16, 5 64, 3 32, 3 16 and 1 4. Metric: 1.5, 1.75 and 2 mm. (Part No: W80576)
$18.26 [Enlarge Picture]

Rotary Tool Kit
- 80 Pieces. Hand held rotary tool. Turns at 1600 rpm. Contains cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone and drill bits. Great for cutting, grinding, polishing, sharpening and drilling. (Part No: W50083)
$19.00 [Enlarge Picture]

Rubber Grommet Assortment
- 125 pieces in 18 various sizes from 1 8 x 9 32 to 1 inch. All in a convenient re-sealable plastic case. (Part No: W5214)
$9.38 [Enlarge Picture]

Screwdriver Set
- 30 pieces. Contains 7 screwdrivers 1 4 to 6 inch, a magnetic bit driver, 6 precision screwdrivers, 14 power bits. All contained in a Plastic Rack (Part No: W1718)
$23.08 [Enlarge Picture]

Spring Assortment
- 200 pieces. Includes compression type sizes from 9 32 x 1 2 to 7 32 x 1 1 2, extension type from 13 64 x 13 16 to 11 32 x 1 7 16. (Part No: W5200)
$7.98 [Enlarge Picture]

Step Drill Bit Set
- 3 Pieces. Titanium Nitride Coated high speed steel. 1 4 inch shank. Drills holes up to 1 inch. For use with metal, wood or plastic. Starts on contact, no center punch required. Automatically deburrs holes as you drill. (Part No: W9003)
$17.20 [Enlarge Picture]

T-Handle Hex Key Set - 10 Pieces (SAE). High quality carbon steel shafts. Black oxide finish resists corrosion. PVC T-handle grips for added torque and comfort. Sizes: 3 32, 7 64, 1 8, 9 64, 5 32, 3 16, 7 32, 1 4, 5 16 and 3 8 inch. Comes with hand storage rack (mountable). (Part No: W80274)$19.94

Torque Wrench - Micrometer 1 2 inch drive adjustable torque wrench. Chrome plated alloy steel. Reversible ratchet head. SAE and Metric Scale. 10 to 150 lb torque range. 1 lb graduations. (Part No: M200DB)$34.40

Valve Spring Tool
- Compresses springs without removing head. Adjustable cam handle keeps tool correctly adjusted for entire job. Remove lever and turn with socket in confined areas. (Part No: W80567)
$31.24 [Enlarge Picture]

WIRE STRIPPER 4-WAY
- 4-way wire stripper crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223)
$9.88 [Enlarge Picture]

Winch Remote, Wireless
- Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003)
$37.50 [Enlarge Picture]

Winch Set, 2500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0002)
$129.95 [Enlarge Picture]

Winch Set, 2500 Lb
- Universal 12 volt with Hand held remote. (Part No: 3013-0004)
$119.95 [Enlarge Picture]

Winch Set, 3500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p n 3013-0003. (Part No: 3013-0001)
$149.95 [Enlarge Picture]

Winch Set, 3500 Lb
- Universal 12 volt with Hand held remote. (Part No: 3013-0005)
$129.95 [Enlarge Picture]

Wire Terminal Assortment
- 160 piece set. Contains 19 popular sizes and types of wire terminals. All in a convenient re-sealable plastic case. (Part No: W5213)
$15.48 [Enlarge Picture]

Woodruff Key Assortment
- 80 pieces. Includes 10 each of: 3x5x13 mm, 3x6.5x16 mm, 4x5x13 mm, 4x6.5x16 mm, 4x7.5x19 mm, 5x7.5x19 mm, 5x9x22 mm, 6x9x22 mm. All in a convenient re-sealable plastic case. (Part No: W5341)
$11.26 [Enlarge Picture]

 
Wheels
Front Tractor Tires
- We are now offering Front Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. (Part No: FRONT_TIRES)
$0.00 [Enlarge Picture]

Front Wheel Bearing Kit
- For models Cub, Lo-Boy. Bearing kit for front wheel tractor, contains (15580) inner cone, (15520) inner cup, (17580) outer cone, (17520) outer cup, (350768R1) felt washer. Complete kit for 1 wheel. (Part No: FW116FS)
$54.08 [Enlarge Picture]

Rear Rim 10 x 24 - 4 Loop Rear Rim for A, B, BN, Super A, 100, 130, 140, 240, and others. Also replaces 354876R91 and 374807R91. Verify correct size. Do simply use tire size to determine rim size. 14.5 inch center to center on loops. Valve stem hole is on side closest to loops. (Part No: 56206DA)$144.95

Rear Rim Carriage Head Bolt and Nut
- 2.5 length, 5 8 diameter FF Carriage Head Bolt with nuts. PRICED EACH. **Minimum order is quantity of 6. (Part No: HB250)
$3.25 [Enlarge Picture]

Rear Tractor Tires
- We are now offering Rear Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. (Part No: REAR_TIRES)
$0.00 [Enlarge Picture]

TIRE GAUGE
- Gauge has special oiling & pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350)
$15.48 [Enlarge Picture]

TIRE GAUGE DIAL
- Precision bourdon tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG)
$17.16 [Enlarge Picture]

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Breass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599)$42.82

Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$39.95 [Enlarge Picture]

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q)$21.00

Tire Tube 24 Inch - For 7.5, 8.3, 9.5 x 24 inch tires. (Part No: WHS060)$37.60

Tire Tube 24 Inch - For 11.2, 12.4 x 24 inch tires. (Part No: WHS059)$51.30

Tire Tube 28 Inch - For 11.2, 12.4 x 28 Inch Tires. (Part No: WHS058)$56.55

Tire Tube 28 Inch - For 13.6, 14.9 x 28 Inch Tires. (Part No: WHS061)$79.45

Tire Tube 32 Inch - For 9.5 x 32 Inch Tires. (Part No: WHS062)$56.95

Tire Tube 38 Inch - For 11.2, 12.4 x 38 Inch Tires. (Part No: WHS064)$65.25

Tire Valve Fluid Adapter
- For ballast. (Part No: S.61167)
$27.90 [Enlarge Picture]

Tire and Tube - 400x12 3 Rib Tire with tube. (Part No: 400x12-3)$74.22

Wheel Bearing Kit - For models Cub, Cub Lo-Boy. Contains: BEARING 15580B, BEARING 15520B, BEARING 17580, BEARING 17520B, SEAL 350768R1, WEAR SEAL 351076R1. This is a complete wheel bearing kit for one wheel. (AI) (Part No: WBKIH11)$54.91

Wheel Rim 7X24
- Rim. 7 wide, 24 diameter with four mounting clamps. For single rear wheels with 7-24, 8.3 8-24 or 9.5 9- 24 tires. Tractors: Cub, Cub Lo-Boy. For Cub, Cub Lo-Boy. Add additional $10.00 each for shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 114717C1)
$118.19 [Enlarge Picture]




PayPal


Customer Service
Monday - Friday
10:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure

  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2014 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.